Hi Atish,
It seems that the panic is due to the missing memcpy during kasan_init.
Could you please check whether this patch is helpful?
When doing kasan_populate, the new allocated base_pud/base_p4d should
contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy
to avoid page fault when read/write kasan shadow region.
Tested on:
- qemu with sv57 and CONFIG_KASAN on.
- qemu with sv48 and CONFIG_KASAN on.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Tested-by: Atish Patra <atishp@rivosinc.com>
Fixes: 8fbdccd2b1 ("riscv: mm: Support kasan for sv57")
Link: https://lore.kernel.org/r/20221009083050.3814850-1-panqinglin2020@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for Sv57-based virtual memory.
* Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
* An improved memmove() implementation.
* Support for the new Ssconfpmf and SBI PMU extensions, which allows for
a much more useful perf implementation on RISC-V systems.
* Support for restartable sequences.
-----BEGIN PGP SIGNATURE-----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=Omc6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for Sv57-based virtual memory.
- Various improvements for the MicroChip PolarFire SOC and the
associated Icicle dev board, which should allow upstream kernels to
boot without any additional modifications.
- An improved memmove() implementation.
- Support for the new Ssconfpmf and SBI PMU extensions, which allows
for a much more useful perf implementation on RISC-V systems.
- Support for restartable sequences.
* tag 'riscv-for-linus-5.18-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (36 commits)
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
riscv: Fixed misaligned memory access. Fixed pointer comparison.
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
...
In sv48, the kasan inner regions are not aligned on PGDIR_SIZE and then
when we populate the kasan linear mapping region, we clear the kasan
vmalloc region which is in the same PGD.
Fix this by copying the content of the kasan early pud after allocating a
new PGD for the first time.
Fixes: e8a62cc26d ("riscv: Implement sv48 support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In order to get the pfn of a struct page* when sparsemem is enabled
without vmemmap, the mem_section structures need to be initialized which
happens in sparse_init.
But kasan_early_init calls pfn_to_page way before sparse_init is called,
which then tries to dereference a null mem_section pointer.
Fix this by removing the usage of this function in kasan_early_init.
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patchset add kasan_populate and kasan_shallow_populate for sv57,
and is tested on both qemu and unmatched with CONFIG_KASAN and
CONFIG_KASAN_VMALLOC on.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to boot
with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost
no cost at runtime.
Note that kasan region had to be moved to the end of the address space
since its location must be known at compile-time and then be valid for
both sv39 and sv48 (and sv57 that is coming).
* riscv-sv48-v3:
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
riscv: Get rid of MAXPHYSMEM configs
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
By adding a new 4th level of page table, give the possibility to 64bit
kernel to address 2^48 bytes of virtual address: in practice, that offers
128TB of virtual address space to userspace and allows up to 64TB of
physical memory.
If the underlying hardware does not support sv48, we will automatically
fallback to a standard 3-level page table by folding the new PUD level into
PGDIR level. In order to detect HW capabilities at runtime, we
use SATP feature that ignores writes with an unsupported mode.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that kasan shadow region is next to the kernel, for sv48, this
region won't be aligned on PGDIR_SIZE and then when populating this
region, we'll need to get down to lower levels of the page table. So
instead of reimplementing the page table walk for the early population,
take advantage of the existing functions used for the final population.
Note that kasan swapper initialization must also be split since memblock
is not initialized at this point and as the last PGD is shared with the
kernel, we'd need to allocate a PUD so postpone the kasan final
population after the kernel population is done.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Nathan reported that because KASAN_SHADOW_OFFSET was not defined in
Kconfig, it prevents asan-stack from getting disabled with clang even
when CONFIG_KASAN_STACK is disabled: fix this by defining the
corresponding config.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When calling this function, all the shadow memory is already populated
with kasan_early_shadow_pte which has PAGE_KERNEL protection.
kasan_populate_early_shadow write-protects the mapping of the range
of addresses passed in argument in zero_pte_populate, which actually
write-protects all the shadow memory mapping since kasan_early_shadow_pte
is used for all the shadow memory at this point. And then when using
memblock API to populate the shadow memory, the first write access to the
kernel stack triggers a trap. This becomes visible with the next commit
that contains a fix for asan-stack.
We already manually populate all the shadow memory in kasan_early_init
and we write-protect kasan_early_shadow_pte at the end of kasan_init
which makes the calls to kasan_populate_early_shadow superfluous so
we can remove them.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Fixes: 8ad8b72721 ("riscv: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Andreas reported commit fc8504765e ("riscv: bpf: Avoid breaking W^X")
breaks booting with one kind of defconfig, I reproduced a kernel panic
with the defconfig:
[ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220
[ 0.139159] Oops [#1]
[ 0.139303] Modules linked in:
[ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1
[ 0.139934] Hardware name: riscv-virtio,qemu (DT)
[ 0.140193] epc : __memset+0xc4/0xfc
[ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82
[ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0
[ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158
[ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0
[ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000
[ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064
[ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff
[ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088
[ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438
[ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac
[ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000
[ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff
[ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f
[ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc
[ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60
[ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168
[ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224
[ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110
[ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc
[ 0.145124] ---[ end trace f1e9643daa46d591 ]---
After some investigation, I think I found the root cause: commit
2bfc6cd81b ("move kernel mapping outside of linear mapping") moves
BPF JIT region after the kernel:
| #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end)
The &_end is unlikely aligned with PMD size, so the front bpf jit
region sits with part of kernel .data section in one PMD size mapping.
But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is
called to make the first bpf jit prog ROX, we will make part of kernel
.data section RO too, so when we write to, for example memset the
.data section, MMU will trigger a store page fault.
To fix the issue, we need to ensure the BPF JIT region is PMD size
aligned. This patch acchieve this goal by restoring the BPF JIT region
to original position, I.E the 128MB before kernel .text section. The
modification to kasan_init.c is inspired by Alexandre.
Fixes: fc8504765e ("riscv: bpf: Avoid breaking W^X")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
commit 2bfc6cd81b ("riscv: Move kernel mapping outside of linear
mapping") makes use of MODULES_VADDR to populate kernel, BPF, modules
mapping. Currently, MODULES_VADDR is defined as below for RV64:
| #define MODULES_VADDR (PFN_ALIGN((unsigned long)&_end) - SZ_2G)
But kasan_init() has two local variables which are also named as _start,
_end, so MODULES_VADDR is evaluated with the local variable _end
rather than the global "_end" as we expected. Fix this issue by
renaming the two local variables.
Fixes: 2bfc6cd81b ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
* Support for the memtest= kernel command-line argument.
* Support for building the kernel with FORTIFY_SOURCE.
* Support for generic clockevent broadcasts.
* Support for the buildtar build target.
* Some build system cleanups to pass more LLVM-friendly arguments.
* Support for kprobes.
* A rearranged kernel memory map, the first part of supporting sv48
systems.
* Improvements to kexec, along with support for kdump and crash kernels.
* An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
* Support for XIP.
* A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
Along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
-----BEGIN PGP SIGNATURE-----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=PsA8
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the memtest= kernel command-line argument.
- Support for building the kernel with FORTIFY_SOURCE.
- Support for generic clockevent broadcasts.
- Support for the buildtar build target.
- Some build system cleanups to pass more LLVM-friendly arguments.
- Support for kprobes.
- A rearranged kernel memory map, the first part of supporting sv48
systems.
- Improvements to kexec, along with support for kdump and crash
kernels.
- An alternatives-based errata framework, along with support for
handling a pair of errata that manifest on some SiFive designs
(including the HiFive Unmatched).
- Support for XIP.
- A device tree for the Microchip PolarFire ICICLE SoC and associated
dev board.
... along with a bunch of cleanups. There are already a handful of fixes
on the list so there will likely be a part 2.
* tag 'riscv-for-linus-5.13-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (45 commits)
RISC-V: Always define XIP_FIXUP
riscv: Remove 32b kernel mapping from page table dump
riscv: Fix 32b kernel build with CONFIG_DEBUG_VIRTUAL=y
RISC-V: Fix error code returned by riscv_hartid_to_cpuid()
RISC-V: Enable Microchip PolarFire ICICLE SoC
RISC-V: Initial DTS for Microchip ICICLE board
dt-bindings: riscv: microchip: Add YAML documentation for the PolarFire SoC
RISC-V: Add Microchip PolarFire SoC kconfig option
RISC-V: enable XIP
RISC-V: Add crash kernel support
RISC-V: Add kdump support
RISC-V: Improve init_resources()
RISC-V: Add kexec support
RISC-V: Add EM_RISCV to kexec UAPI header
riscv: vdso: fix and clean-up Makefile
riscv/mm: Use BUG_ON instead of if condition followed by BUG.
riscv/kprobe: fix kernel panic when invoking sys_read traced by kprobe
riscv: Set ARCH_HAS_STRICT_MODULE_RWX if MMU
riscv: module: Create module allocations without exec permissions
riscv: bpf: Avoid breaking W^X
...
They are not needed after booting, so mark them as __init to move them
to the __init section.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This is a preparatory patch for relocatable kernel and sv48 support.
The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.
The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.
In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Eliminate the following coccicheck warning:
./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When KASAN vmalloc region is populated, there is no userspace process and
the page table in use is swapper_pg_dir, so there is no need to read
SATP. Then we can use the same scheme used by kasan_populate_p*d
functions to go through the page table, which harmonizes the code.
In addition, make use of set_pgd that goes through all unused page table
levels, contrary to p*d_populate functions, which makes this function work
whatever the number of page table levels.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Without this I get a missing prototype warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Make sure that writes to kernel page table during KASAN vmalloc
initialization are made visible by adding a sfence.vma.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Fixes: e178d670f2 ("riscv/kasan: add KASAN_VMALLOC support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
I have a handful of new RISC-V related patches for this merge window:
* A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may catch
errors in new drivers.
* Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
* NUMA support for RISC-V, which involves making the arm64 code generic.
* Support for kasan on the vmalloc region.
* A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
* Support for allocating ASIDs.
* Preliminary support for kernels larger than 128MiB.
* Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
-----BEGIN PGP SIGNATURE-----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=CutX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
The kasan functions that populates the shadow regions used to allocate them
page by page and did not take advantage of hugepages, so fix this by
trying to allocate hugepages of 1GB and fallback to 2MB hugepages or 4K
pages in case it fails.
This reduces the page table memory consumption and improves TLB usage,
as shown below:
Before this patch:
---[ Kasan shadow start ]---
0xffffffc000000000-0xffffffc400000000 0x00000000818ef000 16G PTE . A . . . . R V
0xffffffc400000000-0xffffffc447fc0000 0x00000002b7f4f000 1179392K PTE D A . . . W R V
0xffffffc480000000-0xffffffc800000000 0x00000000818ef000 14G PTE . A . . . . R V
---[ Kasan shadow end ]---
After this patch:
---[ Kasan shadow start ]---
0xffffffc000000000-0xffffffc400000000 0x00000000818ef000 16G PTE . A . . . . R V
0xffffffc400000000-0xffffffc440000000 0x0000000240000000 1G PGD D A . . . W R V
0xffffffc440000000-0xffffffc447e00000 0x00000002b7e00000 126M PMD D A . . . W R V
0xffffffc447e00000-0xffffffc447fc0000 0x00000002b818f000 1792K PTE D A . . . W R V
0xffffffc480000000-0xffffffc800000000 0x00000000818ef000 14G PTE . A . . . . R V
---[ Kasan shadow end ]---
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Current population code populates a whole page table without taking care
of what could have been already allocated and without taking into account
possible index in page table, assuming the virtual address to map is always
aligned on the page table size, which, for example, won't be the case when
the kernel will get pushed to the end of the address space.
Address those problems by rewriting the kasan population function,
splitting it into subfunctions for each different page table level.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
It references to x86/s390 architecture.
So, it doesn't map the early shadow page to cover VMALLOC space.
Prepopulate top level page table for the range that would otherwise be
empty.
lower levels are filled dynamically upon memory allocation while
booting.
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Use virtual address instead of physical address when translating
the address to shadow memory by kasan_mem_to_shadow().
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Fixes: b10d6bca87 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));
/* do something with start and end */
}
Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.
[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init
and kasan_early_init use uninitialized __sbi_rfence as executing the
tlb_flush_all(). Actually, at this moment, only the CPU which is
responsible for the system initialization enables the MMU. Other CPUs are
parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be
replaced by local_tlb_flush_all() to avoid using uninitialized
__sbi_rfence.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each page table should be created by allocating a complete page size
for it. Otherwise, the content of the page table would be corrupted
somewhere through memory allocation which allocates the memory at the
middle of the page table for other use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch ports the feature Kernel Address SANitizer (KASAN).
Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.
There are currently two limitations in this port,
1. RV64 only: KASAN need large address space for extra shadow memory
region.
2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reported-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Qinglin Pan
Linus Torvalds
Alexandre Ghiti
Palmer Dabbelt
Jisheng Zhang
Alexandre Ghiti
Yang Li
Palmer Dabbelt
Nylon Chen
Nick Hu
Mike Rapoport
Vincent Chen
Zong Li