Граф коммитов

8 Коммитов

Автор SHA1 Сообщение Дата
Hanjun Guo f8690227dd ACPI: LPIT: Put the low power idle table after using it
The mapped LPIT table is not used for runtime after init,
put the ACPI table to release the table mapping.

Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:29:16 +02:00
Christoph Hellwig 4bdc0d676a remove ioremap_nocache and devm_ioremap_nocache
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06 09:45:59 +01:00
Rafael J. Wysocki 50e163d43a Merge branches 'acpi-pm' and 'pm-pci'
* acpi-pm:
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  ACPI / sleep: Switch to use acpi_dev_get_first_match_dev()
  ACPI / LPIT: Correct LPIT end address for lpit_process()

* pm-pci:
  ACPI: PM: Unexport acpi_device_get_power()
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  PCI: Do not poll for PME if the device is in D3cold
  PCI: Add missing link delays required by the PCIe spec
  PCI: PM: Replace pci_dev_keep_suspended() with two functions
  PCI: PM: Avoid resuming devices in D3hot during system suspend
2019-07-08 10:49:36 +02:00
Thomas Gleixner 1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Lenny Szubowicz 32865e3e01 ACPI / LPIT: Correct LPIT end address for lpit_process()
Correct the LPIT end address which is passed into lpit_process()
and the end address limit test in lpit_process().

The LPI state descriptor subtables follow the fixed sized
acpi_lpit_header up to the end of the LPIT. The last LPI state
descriptor can end at exactly the end of the LPIT.

Note that this is a fix to a latent problem. Although incorrect,
the unpatched version works because the passed in end address
is just slightly beyond the actual end of the LPIT and the size
of the ACPI LPIT header is smaller than the size of the only
currently defined LPI state descriptor, acpi_lpit_native.

Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-28 19:30:27 +02:00
Rajneesh Bhardwaj 1cdda9486f ACPI / PM: LPIT: Register sysfs attributes based on FADT
ACPI Low Power S0 Idle capabilities are announced via FADT table and can
be used to inform the kernel about the presence of one or more Low Power
Idle (LPI) entries as descried in LPIT table. LPIT table can exist
independently even if the FADT S0 Idle flag is not set and thus it could
confuse user since the following cpuidle attributes are created.

/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us

Presence or absence of above attributes could mean that the given
platform supports S0ix state or not.

This change allows to create the above cpuidle attributes only if
FADT table supports Low Power S0 Idle.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04 09:01:06 +02:00
Srinivas Pandruvada 9383bbadfe ACPI / LPIT: Export lpit_read_residency_count_address()
Export lpit_read_residency_count_address(), so that it can be used from
drivers built as module. With the recent changes, the builtin_pci
functionality of the intel_pmc_core driver is removed and now it can be
built as a module to read this exported interface to calculate the PMC base
address.

Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org

Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-02-04 15:55:52 +02:00
Srinivas Pandruvada eeb2d80d50 ACPI / LPIT: Add Low Power Idle Table (LPIT) support
Add functionality to read LPIT table, which provides:

 - Sysfs interface to read residency counters via
   /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us
   /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us

Here the count "low_power_idle_cpu_residency_us" shows the time spent
by CPU package in low power state.  This is read via MSR interface,
which points to MSR for PKG C10.

Here the count "low_power_idle_system_residency_us" show the count the
system was in low power state. This is read via MMIO interface. This
is mapped to SLP_S0 residency on modern Intel systems. This residency
is achieved only when CPU is in PKG C10 and all functional blocks are
in low power state.

It is possible that none of the above counters present or anyone of the
counter present or all counters present.

For example: On my Kabylake system both of the above counters present.
After suspend to idle these counts updated and prints:

 6916179
 6998564

This counter can be read by tools like turbostat to display. Or it can
be used to debug, if modern systems are reaching desired low power state.

 - Provides an interface to read residency counter memory address

   This address can be used to get the base address of PMC memory
   mapped IO.  This is utilized by intel_pmc_core driver to print
   more debug information.

In addition, to avoid code duplication to read iomem, removed the read of
iomem from acpi_os_read_memory() in osl.c and made a common function
acpi_os_read_iomem(). This new function is used for reading iomem in
in both osl.c and acpi_lpit.c.

Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-10-11 15:38:10 +02:00