The config name is wrong in drivers/staging/Makefile...
The object name is wrong in drivers/staging/mrst-touchscreen/Makefile...
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the touch screen driver tries to find a range of free channels (which
are an array of bytes), by scanning for the "end of used channel" marker.
however it tries to be WAAAAY too smart and does 32 bit logic on 8 bit
quantities, and in the process completely gets it wrong
(repeatedly read the same register instead of incrementing in the loop,
assuming that if any of the 4 bytes in the 32 byte quantity is free,
all four are free, returning the channel number divided by 4 rather than
the actual first free channel number)
On the setting side, the same mistakes are made by and large; changed
this to just use the byte SCU write functions....
with these fixes we go from a completely non detected touchscreen to
something that appears to completely get detected.
(after also fixing the ordering issue that Jacobs patch should solve)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In order to support multiple ST platform devices, a new symbol
'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c
file which intends to add the ST platform device.
On removing this dependency, now inside ST driver maintain the array of
ST platform devices that would be registered.
As of now let id=0, as and when we end up having such platforms
where mutliple ST devices can exist, id would come from
protocol drivers (BT, FM and GPS) as to on which platform device
they want to register to.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the dt2817.c file that fixes up all coding style
issues found by the checkpatch.pl tool
Signed-off-by: Sunny Aujla <sunnyfedora99@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have cleaned both files inside the iface directory (fileo rtmp_pci.h
and rtmp_usb.h). I am not sure about some of the changes I have made
however my adjustments have solved all errors. There were also a few
issues on my machine with ap.h on my machine, however I have since
cleaned that too.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously the wrong spelling was copied a lot of times.
A similar patch for the non-staging part of linux
is committed by Jiri Kosina.
Cc: devel@driverdev.osuosl.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace C99-style comments with C89-style comments, fix some typos,
and fix whitespace to use only tabs.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
An error code is stored in a variable, but 0 is returned instead. Use the
variable instead of 0.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
local idexpression x;
constant C;
@@
if (...) { ...
x = -C
... when != x
(
return <+...x...+>;
|
return NULL;
|
return;
|
* return ...;
)
}
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the cx25821-audio-upstream.c and cx25821-audio.h
that fixes up a warnings found by checkpatch.pl tool.
Signed-off-by: Ilya Gorskin <Revent82@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make functions static and move their declarations to
the top of the file.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix many sparse warnings about data or functions being static.
Fix many sparse warnings about data or functions not being used
(put them inside #if 0/#endif blocks).
Fix sparse warnings about 0 being used for NULL.
Fixed a small bit of source formatting when those lines were being
modified anyway, but there is still lots of this yet to be done.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: devel@driverdev.osuosl.org
Cc: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Original code does not call sysfs_remove_group() on error. This can lead
to NULL dereference.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If stub_probe() failed then do not increase interf_count. In original
code sdev was leaked as its interf_count never reaches 0.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On Fri, Aug 13, 2010 at 03:38:40PM +0200, Dan Carpenter wrote:
> Speak of left over stuff, it's weird that I didn't notice this before
> but gcc complains about an unitialized variable in
> imon_incoming_packet().
>
> drivers/staging/lirc/lirc_imon.c: In function ‘imon_incoming_packet’:
> drivers/staging/lirc/lirc_imon.c:661: warning: ‘chunk_num’ may be used
> uninitialized in this function
>
> I don't know how to fix that, but it looks important.
Ew. Yeah, that doesn't look so hot like it is right now. The old lirc_imon
driver had chunk_num = buf[7], and made much more extensive use of
chunk_num. Simply removing chunk_num and using buf[7] should be fine.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error. Also it must not be called if pci_request_region() fails as
it means that somebody uses device resources and rules the device.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
acpi_bus_register_driver() returns an int, not acpi_status. It returns
zero on success and negative error codes on failure, but acpi_status is
unsigned. We can just use "ret" here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the original source it would write past the end of the array before
returning the error code.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the original code there was some extra semicolons after the if
statement:
if (!channel_map[ieee->current_network.channel]);
^^^
>From the indenting it looked like that should be curly braces instead.
Also I made some white space changes to stop checkpatch.pl from
complaining.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We never use control_req so I removed it.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver should call disable_pci_device() if it returns from pci_probe()
with error.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use DEFINE_PCI_DEVICE_TABLE() to make xgifb_pci_table const and marked as __devinitconst
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first of a patch series that uses PCI_DEVICE() macro for pci table entries on comedi drivers and thus improving readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed two coding style errors in the form of pointer style issues in eeprom.h.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In today linux-next I got a compile warning in staging/otus driver.
This patch solves the issue and also improves the coding style.
Signed-off-by: Roberto Rodriguez Alcala <rralcala@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this one completes my last patch set to compile fine for all drivers.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Datta, Shubhrajyoti <shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
g -> ms/s^2
deg -> rad
deg/s -> rad/s
some temperatures still broken
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now fits other driver's structure for easier modification.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
i2c_smbus_read_byte_data() returns an s32 type. We need to change
"rate" to signed for the error handling to work.
Also I changed it to propogate the error code instead of just returning
-EINVAL. Other error codes could be -EAGAIN for example.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adjust the error handling code so that it benefits from the call to
mutex_unlock at the end of the function.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@rcu exists@
position p1;
expression E;
@@
mutex_lock@p1(E);
...
mutex_unlock(E);
@exists@
position rcu.p1;
expression E;
@@
*mutex_lock@p1(E);
... when != mutex_unlock(E);
?*return ...;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The first kfree(pDevice) is pointless because pDevice is NULL. The
second kfree(pDevice) is a double free because pDevice is the driver's
private data and that is already freed by free_netdev(netdev). Also the
free_netdev() error path doesn't call usb_put_dev().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed spaces between functions name and parenthesis.
Signed-off-by: Victor Rosales <victorhrosales@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed some unused definitions of Ethernet packet types, also replaced
two of them with in-kernel counterparts from include/linux/if_ether.h
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The services_init() and services_exit() functions don't do anything,
so they are removed, and as these are the only two functions defined
in services.c and services.h, then these files are also removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So far, the cfg.c file is empty, and the function prototypes in cfg.h
are not used in any place. So they can be removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, the cfg_set_object
function has also to be removed.
Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, the cfg_set_dev_object
function has also to be removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, the cfg_get_object
function has also to be removed.
Since the driver object handle is retrieved from the drv_data structure,
then the word "Registry" is replaced by "driver data" in the comments.
Also, the hdrv_obj is not used in function omap34_xx_bridge_remove(), so
it is removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, the cfg_get_exec_file
function has also to be removed.
This patch also avoids a possible NULL pointer dereference in function
cfg_get_exec_file(), when drv_datap is checked for NULL and then pass
drv_datap->base_img as argument to strlen().
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The cfg_get_dev_object function is only used in one place and because of
its simplicity, it can be removed.
The parameter *value can be left uninitialized if the strcmp() returns a
nonzero value, so in the function dev_remove_device(), the hdev_obj could
be used uninitialized and could be dereferenced in dev_destroy_device().
This patch fixes this issue, and also removes the dev_obj pointer which
is not used.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions cfg_init() and cfg_exit() do nothing, so they are removed.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, this patch is needed.
The function cfg_get_auto_start() only assigns a value to the flag
tmp, and it is only called by the function api_init_complete2(). So
the function cfg_get_auto_start() is not required.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, this patch is needed.
ntfy.c only contained the function dsp_notifier_event(), and since this
function calls sync_set_event(), then the dsp_notifier_event() is moved
to the sync.c file.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the services directory is going to be removed, the file sync.c is moved
from services to core.
Signed-off-by: Ivan Gomez Castellanos <ivan.gomez@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed comments about who changed/added lines, they do not seem useful.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.
The semantic match that finds this problem is as follows:
// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@
(
* x->irq
|
* x->resource
|
* request(x, ...)
)
...
*pci_enable_device(x)
// </smpl>
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleared checkpatch ERROR: spaces required around that '||'
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
list_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
iterator I;
expression x;
statement S;
@@
I(x,...) { <...
- if (x != NULL || ...)
S
...> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a whitespace issue detected by checkpatch.pl
Signed-off-by: Jacob Smith <tarinaky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the driver received the Addba request frame from AP, a crash could
occur.
Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are some IOT issues when 802.11bgn mode is used to make a WEP
connection.
Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for SBE Inc.'s dual port T3/E3 WAN cards. Based on
their original GPLed driver.
The original driver tarball is now accessible at
http://userweb.kernel.org/~chris/SBE_2T3_Linux_2.0c.tgz
It needs at least a new generic HDLC setup code (not yet written) before
moving to drivers/net/wan.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for the Cypress West Bridge companion chip. Its
function is analogous to the North/South Bridges of PC environments
applied to embedded devices, in that it expands I/O and storage
capabilities of an embedded processor. The Astoria version, which this
driver applies to, functions as a USB, embedded memory and SDIO
controller. The kernel that this patch was applied to is linux-2.6.35,
although it was tested using the android kernel 2.6.29 running on the
Zoom 2 platform. In this system, it was used primarily as a sideloading
accelerator enabling direct data transfers between a USB host PC and
embedded memory without system overheads. Minor modifications were also
made to the kernel for this patch. These include changes such as
EXPORTing of fat_get_block in the kernel code. Another function,
mpage_cleardirty was also added to the memory management code. This
function is used to clear the dirty pages from a specific inode. This
allows for direct, file based DMA. None of these changes are believed to
have any negative impact on the kernel and may provide additional
benefit for other developers and drivers.
The driver, as submitted, was placed into the drivers/staging/westbridge
folder as the directory structure it will eventually reside in is not yet
defined. The driver, as placed in staging is divided into four parts:
1) gadget - this implements a gadget peripheral controller and includes IOCTLs
for MTP transfers
2) block -this implements a generic block device driver to enable access to
embedded memory
3) api -this is the Cypress SDK, and includes USB and Storage specific
functions. In addition, it includes common code for low level routines such as
message passing and common data transfer routines
4) hal - this should likely be included in the arch directory as it needs to
be modified for a given platform. The directory structure in the staging area
is meant to reflect the eventual location of where this code likely should be.
It is platform specific. In this case, the HAL included is for the Android
Zoom 2 platform. Here, West Bridge is connected to the GPMC (general purpose
memory controller) of the OMAP3. Specific timing needs to be enabled to ensure
reliable communication.
Many thanks to Greg KH for conducting initial reviews and providing pointers.
Please contact david.cross@cypress.com for questions, concerns or feedback.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that we have a much better driver for this device (rtl8712), delete
this driver as it is no longer needed.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When operating in normal bg mode, the maximum rate was fixed at 48 Mb/s.
Signed-off-by: Albert Wang <albert_wang@realtek.com.tw>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: ohci: work around VIA and NEC PHY packet reception bug
firewire: core: do not use del_timer_sync() in interrupt context
firewire: net: fix unicast reception RCODE in failure paths
firewire: sbp2: fix stall with "Unsolicited response"
firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send error
ieee1394: Adjust confusing if indentation
VIA VT6306, VIA VT6308, and NEC OrangeLink controllers do not write
packet event codes for received PHY packets (or perhaps write
evt_no_status, hard to tell). Work around it by overwriting the
packet's ACK by ack_complete, so that upper layers that listen to PHY
packet reception get to see these packets.
(Also tested: TI TSB82AA2, TI TSB43AB22/A, TI XIO2213A, Agere FW643,
JMicron JMB381 --- these do not exhibit this bug.)
Clemens proposed a quirks flag for that, IOW whitelist known misbehaving
controllers for this workaround. Though to me it seems harmless enough
to enable for all controllers.
The log_ar_at_event() debug log will continue to show the original
status from the DMA unit.
Reported-by: Clemens Ladisch <clemens@ladisch.de> (VT6308)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
net/ipv4: Eliminate kstrdup memory leak
net/caif/cfrfml.c: use asm/unaligned.h
ax25: missplaced sock_put(sk)
qlge: reset the chip before freeing the buffers
l2tp: test for ethernet header in l2tp_eth_dev_recv()
tcp: select(writefds) don't hang up when a peer close connection
tcp: fix three tcp sysctls tuning
tcp: Combat per-cpu skew in orphan tests.
pxa168_eth: silence gcc warnings
pxa168_eth: update call to phy_mii_ioctl()
pxa168_eth: fix error handling in prope
pxa168_eth: remove unneeded null check
phylib: Fix race between returning phydev and calling adjust_link
caif-driver: add HAS_DMA dependency
3c59x: Fix deadlock between boomerang_interrupt and boomerang_start_tx
qlcnic: fix poll implementation
netxen: fix poll implementation
bridge: netfilter: fix a memory leak
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
vgaarb: Wrap vga_(get|put) in CONFIG_VGA_ARB
drm/radeon/kms: add missing scratch update in dp_detect
drm/modes: Fix CVT-R modeline generation
drm: fix regression in drm locking since BKL removal.
drm/radeon/kms: remove stray radeon_i2c_destroy
drm: mm: fix range restricted allocations
drm/nouveau: drop drm_global_mutex before sleeping in submission path
drm: export drm_global_mutex for drivers to use
drm/nv20: Don't use pushbuf calls on the original nv20.
drm/nouveau: Fix TMDS on some DCB1.5 boards.
drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel.
drm/nv30: Apply modesetting to the correct slave encoder
drm/nouveau: Use a helper function to match PCI device/subsystem IDs.
drm/nv50: add dcb type 14 to enum to prevent compiler complaint
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: Do not report error overflow as a separate error
MCE, AMD: Limit MCE decoding to current families for now
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16651
Signed-off-by: Adam Jackson <ajax@redhat.com>
Tested-by: Adam Serbinski <adam@serbinksi.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This locking path needs proper auditing but probably too late for changes at this point for 2.6.36, so lets go with the quick fix, which is to drop the lock around schedule.
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I missed this one in the i2c unification patch. This
is handled in the core radeon i2c code now.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With the code cleanup in
7a6b2896f2 is the first bad commit
commit 7a6b2896f2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jul 2 15:02:15 2010 +0100
drm_mm: extract check_free_mm_node
I've botched up the range-restriction checks. The result is usually
an X server dying with SIGBUS in libpixman (software fallback rendering).
Change the code to adjust the start and end for range restricted
allocations. IMHO this even makes the code a bit clearer.
Fixes regression bug: https://bugs.freedesktop.org/show_bug.cgi?id=29738
Reported-by-Tested-by: Till MAtthiesen <entropy@everymail.net>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next:
drm/nouveau: drop drm_global_mutex before sleeping in submission path
drm: export drm_global_mutex for drivers to use
drm/nv20: Don't use pushbuf calls on the original nv20.
drm/nouveau: Fix TMDS on some DCB1.5 boards.
drm/nouveau: Fix backlight control on PPC machines with an internal TMDS panel.
drm/nv30: Apply modesetting to the correct slave encoder
drm/nouveau: Use a helper function to match PCI device/subsystem IDs.
drm/nv50: add dcb type 14 to enum to prevent compiler complaint
If we keep hold of the mutex here, the process which currently holds the
buffer object will never be able to release it, causing a deadlock.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Qlge is freeing the buffers before stopping the card DMA, and
this can cause some severe error, as a EEH event on PPC.
This patch just stop the card and then free the resources.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the Overflow MCi_STATUS bit is set, EDAC reports the lost error
with a "no information available" message which often puzzles users
parsing the dmesg. This doesn't make much sense since this error has
been lost anyway so no need for reporting it separately. Thus, report
the overflow bit setting in the MCE dump instead. While at it, remove
reporting of MiscV and ErrorEnable (en) which are superfluous.
Now it looks like this:
[ 1501.650024] MC4_STATUS: Corrected error, other errors lost: yes, CPU context corrupt: no, CECC Error
[ 1501.666887] Northbridge Error, node 2
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The "return" command is buggy on the original nv20, it jumps back to
the caller address as expected, but it doesn't clear the subroutine
active bit making the subsequent pushbuf calls fail with a "stack"
overflow.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The TMDS output of an nv11 was being detected as LVDS, because it uses
DCB type 2 for TMDS instead of type 4.
Reported-by: Bertrand VIEILLE <Vieille.Bertrand@free.fr>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Remove harmful BUG_ON() from ata_bmdma_qc_issue(),
as it casts too wide of a net and breaks sata_mv.
It also crashes the kernel while doing the BUG_ON().
There's already a WARN_ON_ONCE() further down to catch
the case of POLLING for a BMDMA operation.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
Fix DSM/TRIM commands in sata_mv (v2).
These need to be issued using old-school "BM DMA",
rather than via the EDMA host queue.
Since the chips don't have proper BM DMA status,
we need to be more careful with setting the ATA_DMA_INTR bit,
since DSM/TRIM often has a long delay between "DMA complete"
and "command complete".
GEN_I chips don't have BM DMA, so no TRIM for them.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org
ata_qc_issue() BUG_ON()s on data commands w/o data, which may be
submitted via SG_IO. Be less of a drama queen and just trigger
WARN_ON_ONCE() and fail the command with AC_ERR_SYSTEM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stefan Hübner <stefan.huebner@stud.tu-ilmenau.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
dma_dwc_xfer_setup() returns an int and "dma_chan" needs to be signed
for the error handling to work.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
88SE9128 can do FBS and sets it in HOST_CAP but forgets to set FBSCP
in PORT_CMD. Implement AHCI_HFLAG_YES_FBS and apply it to 88SE9128.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Winbond W83759A controller is fully supported by pata_legacy driver
so remove no longer needed pata_winbond driver.
Leave PATA_WINBOND_VLB config option for compatibility reasons
and teach pata_legacy to preserve the old behavior of pata_winbond
driver.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Commit d62f5576 (pata_cmd64x: fix handling of address setup timings)
incorrectly called ata_timing_compute() on UDMA mode on 0 @UT leading
to devide by zero fault. Revert it until better fix is available.
This is reported in bko#16607 by Milan Kocian who also root caused it.
https://bugzilla.kernel.org/show_bug.cgi?id=16607
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-root-caused-by: Milan Kocian <milan.kocian@wq.cz>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xen: handle events as edge-triggered
xen: use percpu interrupts for IPIs and VIRQs
No need to call input_free_device() after input_unregister_device().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Introduced by 987a6c0298 a swap in max/min
calculation gets fixed by this patch.
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Commit 8bf0223ed515be24de0c671eedaff49e78bebc9c (hwmon, k8temp: Fix
temperature reporting for ASB1 processor revisions) fixed temperature
reporting for ASB1 CPUs. But those CPU models (model 0x6b, 0x6f, 0x7f)
were packaged both as AM2 (desktop) and ASB1 (mobile). Thus the commit
leads to wrong temperature reporting for AM2 CPU parts.
The solution is to determine the package type for models 0x6b, 0x6f,
0x7f.
This is done using BrandId from CPUID Fn8000_0001_EBX[15:0]. See
"Constructing the processor Name String" in "Revision Guide for AMD
NPT Family 0Fh Processors" (Rev. 3.46).
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: stable@kernel.org [.32.x, .33.x, .34.x, .35.x]
Reported-by: Vladislav Guberinic <neosisani@gmail.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Fix the following build warning:
CC [M] drivers/hwmon/coretemp.o
drivers/hwmon/coretemp.c: In function "coretemp_init":
drivers/hwmon/coretemp.c:521: warning: unused variable "n"
drivers/hwmon/coretemp.c:521: warning: unused variable "p"
Introduced by commit 851b29cb3b. When
you drop code, you also have to drop the variables this code was
using.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>
Casting "pep->tx_desc_dma" to to a struct tx_desc pointer makes gcc
complain:
drivers/net/pxa168_eth.c:657: warning:
cast to pointer from integer of different size
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy_mii_ioctl() function changed recently. It now takes a struct
ifreq pointer directly.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple issues here:
* Some resources weren't released.
* If alloc_etherdev() failed it would have caused a NULL dereference
because "pep" would be null when we checked "if (pep->clk)".
* Also it's better to propagate the error codes from mdiobus_register()
instead of just returning -ENOMEM.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"pep->pd" isn't checked consistently in this function. For example it's
dereferenced unconditionally on the next line after the end of the if
condition. This function is only called from pxa168_eth_probe() and
pep->pd is always non-NULL so I removed the check.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible that phylib will call adjust_link before returning
from {,of_}phy_connect(), which may cause the following [very rare,
though] oops upon reopening the device:
Unable to handle kernel paging request for data at address 0x0000024c
Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT SMP NR_CPUS=2 LTT NESTING LEVEL : 0
P1021 RDB
Modules linked in:
NIP: c0345dac LR: c0345dac CTR: c0345d84
TASK = dffab6b0[30] 'events/0' THREAD: c0d24000 CPU: 0
[...]
NIP [c0345dac] adjust_link+0x28/0x19c
LR [c0345dac] adjust_link+0x28/0x19c
Call Trace:
[c0d25f00] [000045e1] 0x45e1 (unreliable)
[c0d25f30] [c036c158] phy_state_machine+0x3ac/0x554
[...]
Here is why. Drivers store phydev in their private structures, e.g.
gianfar driver:
static int init_phy(struct net_device *dev)
{
...
priv->phydev = of_phy_connect(...);
...
}
So that adjust_link could retrieve it back:
static void adjust_link(struct net_device *dev)
{
...
struct phy_device *phydev = priv->phydev;
...
}
If the device has been opened before, then phydev->state is set to
PHY_HALTED (or undefined if the driver didn't call phy_stop()).
Now, phy_connect starts the PHY state machine before returning phydev to
the driver:
phy_start_machine(phydev, NULL);
if (phydev->irq > 0)
phy_start_interrupts(phydev);
return phydev;
The time between 'phy_start_machine()' and 'return phydev' is undefined.
The start machine routine delays execution for 1 second, which is enough
for most cases. But under heavy load, or if you're unlucky, it is quite
possible that PHY state machine will execute before phy_connect()
returns, and so adjust_link callback will try to dereference phydev,
which is not yet ready.
To fix the issue, simply initialize the PHY's state to PHY_READY during
phy_attach(). This will ensure that phylib won't call adjust_link before
phy_start().
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix this error on an s390 allyesconfig build:
linux-2.6/drivers/net/caif/caif_spi.c:98:
undefined reference to `dma_free_coherent'
Cc: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When converting this to the new wait_for macro I inverted the wait
condition, which causes all sorts of problems. So correct it to fix
several failures caused by the bad wait (flickering, bad output
detection, tearing, etc.).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xen events are logically edge triggered, as Xen only calls the event
upcall when an event is newly set, but not continuously as it remains set.
As a result, use handle_edge_irq rather than handle_level_irq.
This has the important side-effect of fixing a long-standing bug of
events getting lost if:
- an event's interrupt handler is running
- the event is migrated to a different vcpu
- the event is re-triggered
The most noticable symptom of these lost events is occasional lockups
of blkfront.
Many thanks to Tom Kopec and Daniel Stodden in tracking this down.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Tom Kopec <tek@acm.org>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
IPIs and VIRQs are inherently per-cpu event types, so treat them as such:
- use a specific percpu irq_chip implementation, and
- handle them with handle_percpu_irq
This makes the path for delivering these interrupts more efficient
(no masking/unmasking, no locks), and it avoid problems with attempts
to migrate them.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
We should pass the data to the data register.
Signed-off-by: Jianwei Yang <jianwei.yang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like there is an off-by-one error in one of your changes to
drivers/staging/rar_register/rar_register.c:
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This build bug triggers:
drivers/built-in.o: In function `mantis_exit':
(.text+0x377413): undefined reference to `ir_input_unregister'
drivers/built-in.o: In function `mantis_input_init':
(.text+0x3774ff): undefined reference to `__ir_input_register'
If MANTIS_CORE is enabled but IR_CORE is not. Add the correct
dependency.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Larry Finger
Alek Du
Arjan van de Ven
Pavan Savoy
Sunny Aujla
Neil Munro
Stefan Weil
Ramkumar Ramachandra
Julia Lawall
Gorskin Ilya
Mike McCormack
Randy Dunlap
Dan Carpenter
Kulikov Vasiliy
Jarod Wilson
Javier Martinez Canillas
Roberto Rodriguez Alkala
Denis Kirjanov
Manuel Stahl
Luis Bosch
Victor Rosales
Alejandro Emanuel Paredes
Andres More
Ivan Gomez Castellanos
Andrea Gelmini
Jacob Smith
Krzysztof Halasa
Greg Kroah-Hartman
David Cross
Linus Torvalds
Stefan Richter
Alex Deucher
Adam Jackson
Arnd Bergmann
Daniel Vetter
Dave Airlie
Ben Skeggs
Breno Leitao
Borislav Petkov
Francisco Jerez
Patrice Mandin
Mark Lord
Tejun Heo
Bartlomiej Zolnierkiewicz
Axel Lin
Christoph Fritz
Andreas Herrmann
Jean Delvare
Anton Vorontsov
Heiko Carstens
Jesse Barnes
Jeremy Fitzhardinge
Jianwei Yang
Ossama Othman
Ingo Molnar