When the cluster is marked full, subscribe to subsequent map updates to
ensure we find out promptly when it is no longer full. This will prevent
us from spewing ENOSPC for (much) longer than necessary.
Signed-off-by: Sage Weil <sage@newdream.net>
Old incrementals encode a 0 value (nearly always) when an osd goes down.
Change that to allow any state bit(s) to be flipped. Special case 0 to
mean flip the CEPH_OSD_UP bit to mimic the old behavior.
Signed-off-by: Sage Weil <sage@newdream.net>
Since we pass the nofail arg, we should never get an error; BUG if we do.
(And fix the function to not return an error if __map_request fails.)
Signed-off-by: Sage Weil <sage@newdream.net>
If we get a WAIT as a client something went wrong; error out. And don't
fall through to an unrelated case.
Signed-off-by: Sage Weil <sage@newdream.net>
If there is no get_authorizer method we set the out_kvec to a bogus
pointer. The length is also zero in that case, so it doesn't much matter,
but it's better not to add the empty item in the first place.
Signed-off-by: Sage Weil <sage@newdream.net>
If a connection is closed and/or reopened (ceph_con_close, ceph_con_open)
it can race with a callback. con_work does various state checks for
closed or reopened sockets at the beginning, but drops con->mutex before
making callbacks. We need to check for state bit changes after retaking
the lock to ensure we restart con_work and execute those CLOSED/OPENING
tests or else we may end up operating under stale assumptions.
In Jim's case, this was causing 'bad tag' errors.
There are four cases where we re-take the con->mutex inside con_work: catch
them all and return EAGAIN from try_{read,write} so that we can restart
con_work.
Reported-by: Jim Schutt <jaschut@sandia.gov>
Tested-by: Jim Schutt <jaschut@sandia.gov>
Signed-off-by: Sage Weil <sage@newdream.net>
If memory allocation failed, calling ceph_msg_put() will cause GPF
since some of ceph_msg variables are not initialized first.
Fix Bug #970.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Fix the request transition from linger -> normal request. The key is to
preserve r_osd and requeue on the same OSD. Reregister as a normal request,
add the request to the proper queues, then unregister the linger. Fix the
unregister helper to avoid clearing r_osd (and also simplify the parallel
check in __unregister_request()).
Reported-by: Henry Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
This allows us to use existence of the key type as a feature test,
from userspace.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
We should only clear r_osd if we are neither registered as a linger or a
regular request. We may unregister as a linger while still registered as
a regular request (e.g., in reset_osd). Incorrectly clearing r_osd there
leads to a null pointer dereference in __send_request.
Also simplify the parallel check in __unregister_request() where we just
removed r_osd_item and know it's empty.
Signed-off-by: Sage Weil <sage@newdream.net>
There was a missing unlock on the error path if __map_request() failed.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
This patch fixes 'event_work' dereference before it is checked for NULL.
Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Signed-off-by: Sage Weil <sage@newdream.net>
The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client. This fixes
an oops easily triggered under UML by
while true ; do mount ... ; umount ... ; done
Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out. This bug is basically an artifact of the ceph ->
ceph+libceph conversion.
Signed-off-by: Sage Weil <sage@newdream.net>
Lingering requests are requests that are sent to the OSD normally but
tracked also after we get a successful request. This keeps the OSD
connection open and resends the original request if the object moves to
another OSD. The OSD can then send notification messages back to us
if another client initiates a notify.
This framework will be used by RBD so that the client gets notification
when a snapshot is created by another node or tool.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
If we send a request to osd A, and the request's pg remaps to osd B and
then back to A in quick succession, we need to resend the request to A. The
old code was only calling kick_requests after processing all incremental
maps in a message, so it was very possible to not resend a request that
needed to be resent. This would make the osd eventually time out (at least
with the current default of osd timeouts enabled).
The correct approach is to scan requests on every map incremental. This
patch refactors the kick code in a few ways:
- all requests are either on req_lru (in flight), req_unsent (ready to
send), or req_notarget (currently map to no up osd)
- mapping always done by map_request (previous map_osds)
- if the mapping changes, we requeue. requests are resent only after all
map incrementals are processed.
- some osd reset code is moved out of kick_requests into a separate
function
- the "kick this osd" functionality is moved to kick_osd_requests, as it
is unrelated to scanning for request->pg->osd mapping changes
Signed-off-by: Sage Weil <sage@newdream.net>
It used to return -EINVAL because it thought the end was not aligned
to 4 bytes.
Clean up superfluous src < end test in if, the while itself guarantees
that.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The standby logic used to be pretty dependent on the work requeueing
behavior that changed when we switched to WQ_NON_REENTRANT. It was also
very fragile.
Restructure things so that:
- We clear WRITE_PENDING when we set STANDBY. This ensures we will
requeue work when we wake up later.
- con_work backs off if STANDBY is set. There is nothing to do if we are
in standby.
- clear_standby() helper is called by both con_send() and con_keepalive(),
the two actions that can wake us up again. Move the connect_seq++
logic here.
Signed-off-by: Sage Weil <sage@newdream.net>
With commit f363e45f we replaced a bunch of hacky workqueue mutual
exclusion logic with the WQ_NON_REENTRANT flag. One pieces of fallout is
that the exponential backoff breaks in certain cases:
* con_work attempts to connect.
* we get an immediate failure, and the socket state change handler queues
immediate work.
* con_work calls con_fault, we decide to back off, but can't queue delayed
work.
In this case, we add a BACKOFF bit to make con_work reschedule delayed work
next time it runs (which should be immediately).
Signed-off-by: Sage Weil <sage@newdream.net>
If we mark the connection CLOSED we will give up trying to reconnect to
this server instance. That is appropriate for things like a protocol
version mismatch that won't change until the server is restarted, at which
point we'll get a new addr and reconnect. An authorization failure like
this is probably due to the server not properly rotating it's secret keys,
however, and should be treated as transient so that the normal backoff and
retry behavior kicks in.
Signed-off-by: Sage Weil <sage@newdream.net>
get_user_pages() can return fewer pages than we ask for. We were returning
a bogus pointer/error code in that case. Instead, loop until we get all
the pages we want or get an error we can return to the caller.
Signed-off-by: Sage Weil <sage@newdream.net>
Pass errors from writing to the socket up the stack. If we get -EAGAIN,
return 0 from the helper to simplify the callers' checks.
Signed-off-by: Sage Weil <sage@newdream.net>
If we get EAGAIN when trying to read from the socket, it is not an error.
Return 0 from the helper in this case to simplify the error handling cases
in the caller (indirectly, try_read).
Fix try_read to pass any error to it's caller (con_work) instead of almost
always returning 0. This let's us respond to things like socket
disconnects.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: fix cleanup when trying to mount inexistent image
net/ceph: make ceph_msgr_wq non-reentrant
ceph: fsc->*_wq's aren't used in memory reclaim path
ceph: Always free allocated memory in osdmap_decode()
ceph: Makefile: Remove unnessary code
ceph: associate requests with opening sessions
ceph: drop redundant r_mds field
ceph: implement DIRLAYOUTHASH feature to get dir layout from MDS
ceph: add dir_layout to inode
ceph messenger code does a rather complex dancing around multithread
workqueue to make sure the same work item isn't executed concurrently
on different CPUs. This restriction can be provided by workqueue with
WQ_NON_REENTRANT.
Make ceph_msgr_wq non-reentrant workqueue with the default concurrency
level and remove the QUEUED/BUSY logic.
* This removes backoff handling in con_work() but it couldn't reliably
block execution of con_work() to begin with - queue_con() can be
called after the work started but before BUSY is set. It seems that
it was an optimization for a rather cold path and can be safely
removed.
* The number of concurrent work items is bound by the number of
connections and connetions are independent from each other. With
the default concurrency level, different connections will be
executed independently.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sage Weil <sage@newdream.net>
Cc: ceph-devel@vger.kernel.org
Signed-off-by: Sage Weil <sage@newdream.net>
Add a ceph_dir_layout to the inode, and calculate dentry hash values based
on the parent directory's specified dir_hash function. This is needed
because the old default Linux dcache hash function is extremely week and
leads to a poor distribution of files among dir fragments.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
ceph: handle partial result from get_user_pages
ceph: mark user pages dirty on direct-io reads
ceph: fix null pointer dereference in ceph_init_dentry for nfs reexport
ceph: fix direct-io on non-page-aligned buffers
ceph: fix msgr_init error path
The get_user_pages() helper can return fewer than the requested pages.
Error out in that case, and clean up the partial result.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
For read operation, we have to set the argument _write_ of get_user_pages
to 1 since we will write data to pages. Also, we need to SetPageDirty before
releasing these pages.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
of/phylib: Use device tree properties to initialize Marvell PHYs.
phylib: Add support for Marvell 88E1149R devices.
phylib: Use common page register definition for Marvell PHYs.
qlge: Fix incorrect usage of module parameters and netdev msg level
ipv6: fix missing in6_ifa_put in addrconf
SuperH IrDA: correct Baud rate error correction
atl1c: Fix hardware type check for enabling OTP CLK
net: allow GFP_HIGHMEM in __vmalloc()
bonding: change list contact to netdev@vger.kernel.org
e1000: fix screaming IRQ
Changed Makefile to use <modules>-y instead of <modules>-objs
because -objs is deprecated and not mentioned in
Documentation/kbuild/makefiles.txt.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We forgot to use __GFP_HIGHMEM in several __vmalloc() calls.
In ceph, add the missing flag.
In fib_trie.c, xfrm_hash.c and request_sock.c, using vzalloc() is
cleaner and allows using HIGHMEM pages as well.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The alignment used for reading data into or out of pages used to be taken
from the data_off field in the message header. This only worked as long
as the page alignment matched the object offset, breaking direct io to
non-page aligned offsets.
Instead, explicitly specify the page alignment next to the page vector
in the ceph_msg struct, and use that instead of the message header (which
probably shouldn't be trusted). The alloc_msg callback is responsible for
filling in this field properly when it sets up the page vector.
Signed-off-by: Sage Weil <sage@newdream.net>
Sage Weil
Henry C Chang
Linus Torvalds
Lucas De Marchi
Tommi Virtanen
Dan Carpenter
Mariusz Kozlowski
Yehuda Sadeh
Tejun Heo
Jesper Juhl
David S. Miller
Henry C Chang
Tracey Dent
Eric Dumazet