Граф коммитов

91 Коммитов

Автор SHA1 Сообщение Дата
Jakub Kicinski 98b6086297 net: sched: remove psched_tdiff_bounded()
Not used since v3.9.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27 13:53:27 +00:00
Paul Blakey 6f022c2ddb net: openvswitch: Fix ct_state nat flags for conns arriving from tc
Netfilter conntrack maintains NAT flags per connection indicating
whether NAT was configured for the connection. Openvswitch maintains
NAT flags on the per packet flow key ct_state field, indicating
whether NAT was actually executed on the packet.

When a packet misses from tc to ovs the conntrack NAT flags are set.
However, NAT was not necessarily executed on the packet because the
connection's state might still be in NEW state. As such, openvswitch
wrongly assumes that NAT was executed and sets an incorrect flow key
NAT flags.

Fix this, by flagging to openvswitch which NAT was actually done in
act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so
the packet flow key NAT flags will be correctly set.

Fixes: b57dc7c13e ("net/sched: Introduce action ct")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09 16:24:12 -08:00
Paul Blakey 3849595866 net/sched: flow_dissector: Fix matching on zone id for invalid conns
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.

To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).

Fixes: 7baf2429a1 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 18:06:35 -08:00
Paul Blakey ec624fe740 net/sched: Extend qdisc control block with tc control block
BPF layer extends the qdisc control block via struct bpf_skb_data_end
and because of that there is no more room to add variables to the
qdisc layer control block without going over the skb->cb size.

Extend the qdisc control block with a tc control block,
and move all tc related variables to there as a pre-step for
extending the tc control block with additional members.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 18:06:35 -08:00
王贇 b193e15ac6 net: prevent user from passing illegal stab size
We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-26 11:09:07 +01:00
Yunsheng Lin 102b55ee92 net: sched: fix tx action rescheduling issue during deactivation
Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:

CPU0(net_tx_atcion)  CPU1(__dev_xmit_skb)  CPU2(dev_deactivate)
          .                   .                     .
          .            set STATE_MISSED             .
          .           __netif_schedule()            .
          .                   .           set STATE_DEACTIVATED
          .                   .                qdisc_reset()
          .                   .                     .
          .<---------------   .              synchronize_net()
clear __QDISC_STATE_SCHED  |  .                     .
          .                |  .                     .
          .                |  .            some_qdisc_is_busy()
          .                |  .               return *false*
          .                |  .                     .
  test STATE_DEACTIVATED   |  .                     .
__qdisc_run() *not* called |  .                     .
          .                |  .                     .
   test STATE_MISS         |  .                     .
 __netif_schedule()--------|  .                     .
          .                   .                     .
          .                   .                     .

__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.

qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.

So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().

The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed86 ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().

After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.

Fixes: 6b3ba9146f ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
    avoid the endless rescheduling problem, but there may still
    be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-14 15:05:46 -07:00
Vladimir Oltean 847cbfc014 net: add a helper to avoid issues with HW TX timestamping and SO_TXTIME
As explained in commit 29d98f54a4 ("net: enetc: allow hardware
timestamping on TX queues with tc-etf enabled"), hardware TX
timestamping requires an skb with skb->tstamp = 0. When a packet is sent
with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp,
so the drivers need to explicitly reset skb->tstamp to zero after
consuming the TX time.

Create a helper named skb_txtime_consumed() which does just that. All
drivers which offload TC_SETUP_QDISC_ETF should implement it, and it
would make it easier to assess during review whether they do the right
thing in order to be compatible with hardware timestamping or not.

Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-10 12:45:16 -08:00
Allen Pais 6e1978a9a9 net: sched: convert tasklets to use new tasklet_setup() API
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07 10:41:15 -08:00
Eric Dumazet 846e463a70 net/sched: get rid of qdisc->padded
kmalloc() of sufficiently big portion of memory is cache-aligned
in regular conditions. If some debugging options are used,
there is no reason qdisc structures would need 64-byte alignment
if most other kernel structures are not aligned.

This get rid of QDISC_ALIGN and QDISC_ALIGNTO.

Addition of privdata field will help implementing
the reverse of qdisc_priv() and documents where
the private data is.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Allen Pais <allen.lkml@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09 08:08:08 -07:00
Toke Høiland-Jørgensen d7bf2ebebc sched: consistently handle layer3 header accesses in the presence of VLANs
There are a couple of places in net/sched/ that check skb->protocol and act
on the value there. However, in the presence of VLAN tags, the value stored
in skb->protocol can be inconsistent based on whether VLAN acceleration is
enabled. The commit quoted in the Fixes tag below fixed the users of
skb->protocol to use a helper that will always see the VLAN ethertype.

However, most of the callers don't actually handle the VLAN ethertype, but
expect to find the IP header type in the protocol field. This means that
things like changing the ECN field, or parsing diffserv values, stops
working if there's a VLAN tag, or if there are multiple nested VLAN
tags (QinQ).

To fix this, change the helper to take an argument that indicates whether
the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we
make sure to skip all of them, so behaviour is consistent even in QinQ
mode.

To make the helper usable from the ECN code, move it to if_vlan.h instead
of pkt_sched.h.

v3:
- Remove empty lines
- Move vlan variable definitions inside loop in skb_protocol()
- Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and
  bpf_skb_ecn_set_ce()

v2:
- Use eth_type_vlan() helper in skb_protocol()
- Also fix code that reads skb->protocol directly
- Change a couple of 'if/else if' statements to switch constructs to avoid
  calling the helper twice

Reported-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
Fixes: d8b9605d26 ("net: sched: fix skb->protocol use in case of accelerated vlan path")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03 14:34:53 -07:00
Eric Dumazet efe074c2cc net_sched: add qdisc_watchdog_schedule_range_ns()
Some packet schedulers might want to add a slack
when programming hrtimers. This can reduce number
of interrupts and increase batch sizes and thus
give good xmit_more savings.

This commit adds qdisc_watchdog_schedule_range_ns()
helper, with an extra delta_ns parameter.

Legacy qdisc_watchdog_schedule_n() becomes an inline
passing a zero slack.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17 21:16:34 -07:00
Gustavo A. R. Silva b90feaff2a net: sched: Replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29 21:27:02 -08:00
David S. Miller 1bab8d4c48 Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net
Pull in bug fixes from 'net' tree for the merge window.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-17 23:51:10 +02:00
Vinicius Costa Gomes 9c66d15646 taprio: Add support for hardware offloading
This allows taprio to offload the schedule enforcement to capable
network cards, resulting in more precise windows and less CPU usage.

The gate mask acts on traffic classes (groups of queues of same
priority), as specified in IEEE 802.1Q-2018, and following the existing
taprio and mqprio semantics.
It is up to the driver to perform conversion between tc and individual
netdev queues if for some reason it needs to make that distinction.

Full offload is requested from the network interface by specifying
"flags 2" in the tc qdisc creation command, which in turn corresponds to
the TCA_TAPRIO_ATTR_FLAG_FULL_OFFLOAD bit.

The important detail here is the clockid which is implicitly /dev/ptpN
for full offload, and hence not configurable.

A reference counting API is added to support the use case where Ethernet
drivers need to keep the taprio offload structure locally (i.e. they are
a multi-port switch driver, and configuring a port depends on the
settings of other ports as well). The refcount_t variable is kept in a
private structure (__tc_taprio_qopt_offload) and not exposed to drivers.

In the future, the private structure might also be expanded with a
backpointer to taprio_sched *q, to implement the notification system
described in the patch (of when admin became oper, or an error occurred,
etc, so the offload can be monitored with 'tc qdisc show').

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-16 21:32:57 +02:00
Paolo Abeni d518d2ed86 net/sched: fix race between deactivation and dequeue for NOLOCK qdisc
The test implemented by some_qdisc_is_busy() is somewhat loosy for
NOLOCK qdisc, as we may hit the following scenario:

CPU1						CPU2
// in net_tx_action()
clear_bit(__QDISC_STATE_SCHED...);
						// in some_qdisc_is_busy()
						val = (qdisc_is_running(q) ||
						       test_bit(__QDISC_STATE_SCHED,
								&q->state));
						// here val is 0 but...
qdisc_run(q)
// ... CPU1 is going to run the qdisc next

As a conseguence qdisc_run() in net_tx_action() can race with qdisc_reset()
in dev_qdisc_reset(). Such race is not possible for !NOLOCK qdisc as
both the above bit operations are under the root qdisc lock().

After commit 021a17ed79 ("pfifo_fast: drop unneeded additional lock on dequeue")
the race can cause use after free and/or null ptr dereference, but the root
cause is likely older.

This patch addresses the issue explicitly checking for deactivation under
the seqlock for NOLOCK qdisc, so that the qdisc_run() in the critical
scenario becomes a no-op.

Note that the enqueue() op can still execute concurrently with dev_qdisc_reset(),
but that is safe due to the skb_array() locking, and we can't avoid that
for NOLOCK qdiscs.

Fixes: 021a17ed79 ("pfifo_fast: drop unneeded additional lock on dequeue")
Reported-by: Li Shuang <shuali@redhat.com>
Reported-and-tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-15 20:35:55 +02:00
Vlad Buslov 3a7d0d07a3 net: sched: extend Qdisc with rcu
Currently, Qdisc API functions assume that users have rtnl lock taken. To
implement rtnl unlocked classifiers update interface, Qdisc API must be
extended with functions that do not require rtnl lock.

Extend Qdisc structure with rcu. Implement special version of put function
qdisc_put_unlocked() that is called without rtnl lock taken. This function
only takes rtnl lock if Qdisc reference counter reached zero and is
intended to be used as optimization.

Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25 20:17:35 -07:00
Jesus Sanchez-Palencia 88cab77162 net/sched: Add HW offloading capability to ETF
Add infra so etf qdisc supports HW offload of time-based transmission.

For hw offload, the time sorted list is still used, so packets are
dequeued always in order of txtime.

Example:

$ tc qdisc replace dev enp2s0 parent root handle 100 mqprio num_tc 3 \
           map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0

$ tc qdisc add dev enp2s0 parent 100:1 etf offload delta 100000 \
	   clockid CLOCK_REALTIME

In this example, the Qdisc will use HW offload for the control of the
transmission time through the network adapter. The hrtimer used for
packets scheduling inside the qdisc will use the clockid CLOCK_REALTIME
as reference and packets leave the Qdisc "delta" (100000) nanoseconds
before their transmission time. Because this will be using HW offload and
since dynamic clocks are not supported by the hrtimer, the system clock
and the PHC clock must be synchronized for this mode to behave as
expected.

Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:30:27 +09:00
Vinicius Costa Gomes 860b642b9c net/sched: Allow creating a Qdisc watchdog with other clocks
This adds 'qdisc_watchdog_init_clockid()' that allows a clockid to be
passed, this allows other time references to be used when scheduling
the Qdisc to run.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 22:30:27 +09:00
Jakub Kicinski 868717ae73 net: remove prototype of qdisc_lookup_class()
Looks like qdisc_lookup_class() never existed in the tree
in the git era.  Remove the prototype from the header.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16 14:56:54 -05:00
Alexander Aring a38a98821c net: sch: api: add extack support in qdisc_create_dflt
This patch adds extack support for the function qdisc_create_dflt which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_create_dflt failed. The function qdisc_create_dflt
will also call an init callback which can fail by any per-qdisc specific
handling.

Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 12:32:51 -05:00
Alexander Aring e9bc3fa28b net: sch: api: add extack support in qdisc_get_rtab
This patch adds extack support for the function qdisc_get_rtab which is
a common used function in the tc subsystem. Callers which are interested
in the receiving error can assign extack to get a more detailed
information why qdisc_get_rtab failed.

Cc: David Ahern <dsahern@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 12:32:50 -05:00
John Fastabend 29b86cdac0 net: sched: remove remaining uses for qdisc_qlen in xmit path
sch_direct_xmit() uses qdisc_qlen as a return value but all call sites
of the routine only check if it is zero or not. Simplify the logic so
that we don't need to return an actual queue length value.

This introduces a case now where sch_direct_xmit would have returned
a qlen of zero but now it returns true. However in this case all
call sites of sch_direct_xmit will implement a dequeue() and get
a null skb and abort. This trades tracking qlen in the hotpath for
an extra dequeue operation. Overall this seems to be good for
performance.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08 13:32:25 -05:00
John Fastabend 6c148184b5 net: sched: cleanup qdisc_run and __qdisc_run semantics
Currently __qdisc_run calls qdisc_run_end() but does not call
qdisc_run_begin(). This makes it hard to track pairs of
qdisc_run_{begin,end} across function calls.

To simplify reading these code paths this patch moves begin/end calls
into qdisc_run().

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08 13:32:25 -05:00
David S. Miller 2a171788ba Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Files removed in 'net-next' had their license header updated
in 'net'.  We take the remove from 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04 09:26:51 +09:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Vinicius Costa Gomes 3d0bd028ff net/sched: Add support for HW offloading for CBS
This adds support for offloading the CBS algorithm to the controller,
if supported. Drivers wanting to support CBS offload must implement
the .ndo_setup_tc callback and handle the TC_SETUP_CBS (introduced
here) type.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-27 09:49:24 -07:00
Jiri Pirko fa71212e91 net: sched: remove unused is_classid_clsact_ingress/egress helpers
These helpers are no longer in use by drivers, so remove them.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21 03:04:08 +01:00
Jiri Pirko 855319becb net: sched: store net pointer in block and introduce qdisc_net helper
Store net pointer in the block structure. Along the way, introduce
qdisc_net helper which allows to easily obtain net pointer for
qdisc instance.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 21:00:40 +01:00
Jiri Pirko 861932ecc3 net: sched: Add helpers to identify classids
Offloading drivers need to understand what qdisc class a filter is added
to. Currently they only need to identify ingress, clsact->ingress and
clsact->egress. So provide these helpers.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-11 13:47:00 -07:00
Jiri Pirko 87d83093bf net: sched: move tc_classify function to cls_api.c
Move tc_classify function to cls_api.c where it belongs, rename it to
fit the namespace.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 15:22:13 -04:00
Jiri Kosina 49b499718f net: sched: make default fifo qdiscs appear in the dump
The original reason [1] for having hidden qdiscs (potential scalability
issues in qdisc_match_from_root() with single linked list in case of large
amount of qdiscs) has been invalidated by 59cc1f61f0 ("net: sched: convert
qdisc linked list to hashtable").

This allows us for bringing more clarity and determinism into the dump by
making default pfifo qdiscs visible.

We're not turning this on by default though, at it was deemed [2] too
intrusive / unnecessary change of default behavior towards userspace.
Instead, TCA_DUMP_INVISIBLE netlink attribute is introduced, which allows
applications to request complete qdisc hierarchy dump, including the
ones that have always been implicit/invisible.

Singleton noop_qdisc stays invisible, as teaching the whole infrastructure
about singletons would require quite some surgery with very little gain
(seeing no qdisc or seeing noop qdisc in the dump is probably setting
the same user expectation).

[1] http://lkml.kernel.org/r/1460732328.10638.74.camel@edumazet-glaptop3.roam.corp.google.com
[2] http://lkml.kernel.org/r/20161021.105935.1907696543877061916.davem@davemloft.net

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12 22:53:02 -07:00
Jesper Dangaard Brouer d0a81f67cd net: make default TX queue length a defined constant
The default TX queue length of Ethernet devices have been a magic
constant of 1000, ever since the initial git import.

Looking back in historical trees[1][2] the value used to be 100,
with the same comment "Ethernet wants good queues". The commit[3]
that changed this from 100 to 1000 didn't describe why, but from
conversations with Robert Olsson it seems that it was changed
when Ethernet devices went from 100Mbit/s to 1Gbit/s, because the
link speed increased x10 the queue size were also adjusted.  This
value later caused much heartache for the bufferbloat community.

This patch merely moves the value into a defined constant.

[1] https://git.kernel.org/cgit/linux/kernel/git/davem/netdev-vger-cvs.git/
[2] https://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/
[3] https://git.kernel.org/tglx/history/c/98921832c232

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-07 20:15:55 -05:00
Jiri Kosina 59cc1f61f0 net: sched: convert qdisc linked list to hashtable
Convert the per-device linked list into a hashtable. The primary
motivation for this change is that currently, we're not tracking all the
qdiscs in hierarchy (e.g. excluding default qdiscs), as the lookup
performed over the linked list by qdisc_match_from_root() is rather
expensive.

The ultimate goal is to get rid of hidden qdiscs completely, which will
bring much more determinism in user experience.

Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10 17:19:02 -07:00
Eric Dumazet 45f50bed1d net_sched: remove generic throttled management
__QDISC_STATE_THROTTLED bit manipulation is rather expensive
for HTB and few others.

I already removed it for sch_fq in commit f2600cf02b
("net: sched: avoid costly atomic operation in fq_dequeue()")
and so far nobody complained.

When one ore more packets are stuck in one or more throttled
HTB class, a htb dequeue() performs two atomic operations
to clear/set __QDISC_STATE_THROTTLED bit, while root qdisc
lock is held.

Removing this pair of atomic operations bring me a 8 % performance
increase on 200 TCP_RR tests, in presence of throttled classes.

This patch has no side effect, since nothing actually uses
disc_is_throttled() anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-10 23:58:21 -07:00
Eric Dumazet a9efad8b24 net_sched: avoid too many hrtimer_start() calls
I found a serious performance bug in packet schedulers using hrtimers.

sch_htb and sch_fq are definitely impacted by this problem.

We constantly rearm high resolution timers if some packets are throttled
in one (or more) class, and other packets are flying through qdisc on
another (non throttled) class.

hrtimer_start() does not have the mod_timer() trick of doing nothing if
expires value does not change :

	if (timer_pending(timer) &&
            timer->expires == expires)
                return 1;

This issue is particularly visible when multiple cpus can queue/dequeue
packets on the same qdisc, as hrtimer code has to lock a remote base.

I used following fix :

1) Change htb to use qdisc_watchdog_schedule_ns() instead of open-coding
it.

2) Cache watchdog prior expiration. hrtimer might provide this, but I
prefer to not rely on some hrtimer internal.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-24 14:49:14 -07:00
Daniel Borkmann 3b3ae88026 net: sched: consolidate tc_classify{,_compat}
For classifiers getting invoked via tc_classify(), we always need an
extra function call into tc_classify_compat(), as both are being
exported as symbols and tc_classify() itself doesn't do much except
handling of reclassifications when tp->classify() returned with
TC_ACT_RECLASSIFY.

CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(),
all others use tc_classify(). When tc actions are being configured
out in the kernel, tc_classify() effectively does nothing besides
delegating.

We could spare this layer and consolidate both functions. pktgen on
single CPU constantly pushing skbs directly into the netif_receive_skb()
path with a dummy classifier on ingress qdisc attached, improves
slightly from 22.3Mpps to 23.1Mpps.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27 14:18:48 -07:00
Jiri Pirko df8a39defa net: rename vlan_tx_* helpers since "tx" is misleading there
The same macros are used for rx as well. So rename it.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:51:08 -05:00
Jiri Pirko d8b9605d26 net: sched: fix skb->protocol use in case of accelerated vlan path
tc code implicitly considers skb->protocol even in case of accelerated
vlan paths and expects vlan protocol type here. However, on rx path,
if the vlan header was already stripped, skb->protocol contains value
of next header. Similar situation is on tx path.

So for skbs that use skb->vlan_tci for tagging, use skb->vlan_proto instead.

Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:51:08 -05:00
Eric Dumazet f2600cf02b net: sched: avoid costly atomic operation in fq_dequeue()
Standard qdisc API to setup a timer implies an atomic operation on every
packet dequeue : qdisc_unthrottled()

It turns out this is not really needed for FQ, as FQ has no concept of
global qdisc throttling, being a qdisc handling many different flows,
some of them can be throttled, while others are not.

Fix is straightforward : add a 'bool throttle' to
qdisc_watchdog_schedule_ns(), and remove calls to qdisc_unthrottled()
in sch_fq.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-06 00:55:10 -04:00
Eric Dumazet 55a93b3ea7 qdisc: validate skb without holding lock
Validation of skb can be pretty expensive :

GSO segmentation and/or checksum computations.

We can do this without holding qdisc lock, so that other cpus
can queue additional packets.

Trick is that requeued packets were already validated, so we carry
a boolean so that sch_direct_xmit() can validate a fresh skb list,
or directly use an old one.

Tested on 40Gb NIC (8 TX queues) and 200 concurrent flows, 48 threads
host.

Turning TSO on or off had no effect on throughput, only few more cpu
cycles. Lock contention on qdisc lock disappeared.

Same if disabling TX checksum offload.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-03 15:36:11 -07:00
Eric Dumazet d2de875c6d net: use ktime_get_ns() and ktime_get_real_ns() helpers
ktime_get_ns() replaces ktime_to_ns(ktime_get())

ktime_get_real_ns() replaces ktime_to_ns(ktime_get_real())

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 19:57:23 -07:00
Florian Westphal 6e765a009a net_sched: drr: warn when qdisc is not work conserving
The DRR scheduler requires that items on the active list are work
conserving, i.e. do not hold on to skbs for throttling purposes, etc.
Attaching e.g. tbf renders DRR useless because all other classes on the
active list are delayed as well.

So, warn users that this configuration won't work as expected; we
already do this in couple of other qdiscs, see e.g.

commit b00355db3f
('pkt_sched: sch_hfsc: sch_htb: Add non-work-conserving warning handler')

The 'const' change is needed to avoid compiler warning ("discards 'const'
qualifier from pointer target type").

tested with:
drr_hier() {
        parent=$1
        classes=$2
        for i in  $(seq 1 $classes); do
                classid=$parent$(printf %x $i)
                tc class add dev eth0 parent $parent classid $classid drr
		tc qdisc add dev eth0 parent $classid tbf rate 64kbit burst 256kbit limit 64kbit
        done
}
tc qdisc add dev eth0 root handle 1: drr
drr_hier 1: 32
tc filter add dev eth0 protocol all pref 1 parent 1: handle 1 flow hash keys dst perturb 1 divisor 32

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11 15:50:59 -07:00
Eric Dumazet 95dc19299f pkt_sched: give visibility to mq slave qdiscs
Commit 6da7c8fcbc ("qdisc: allow setting default queuing discipline")
added the ability to change default qdisc from pfifo_fast to say fq

But as most modern ethernet devices are multiqueue, we cant really
see all the statistics from "tc -s qdisc show", as the default root
qdisc is mq.

This patch adds the calls to qdisc_list_add() to mq and mqprio

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09 19:54:47 -05:00
stephen hemminger 6da7c8fcbc qdisc: allow setting default queuing discipline
By default, the pfifo_fast queue discipline has been used by default
for all devices. But we have better choices now.

This patch allow setting the default queueing discipline with sysctl.
This allows easy use of better queueing disciplines on all devices
without having to use tc qdisc scripts. It is intended to allow
an easy path for distributions to make fq_codel or sfq the default
qdisc.

This patch also makes pfifo_fast more of a first class qdisc, since
it is now possible to manually override the default and explicitly
use pfifo_fast. The behavior for systems who do not use the sysctl
is unchanged, they still get pfifo_fast

Also removes leftover random # in sysctl net core.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31 00:32:32 -04:00
Joe Perches 5c15257f93 net: Remove extern from include/net/ scheduling prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Reflow modified prototypes to 80 columns.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31 17:24:22 -07:00
Jiri Pirko 34c5d292ce sch_api: introduce qdisc_watchdog_schedule_ns()
tbf will need to schedule watchdog in ns. No need to convert it twice.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12 18:59:45 -05:00
Eric Dumazet 95c9617472 net: cleanup unsigned to unsigned int
Use of "unsigned int" is preferred to bare "unsigned" in net tree.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:44:40 -04:00
Eric Dumazet dc7f9f6e88 net: sched: constify tcf_proto and tc_action
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-06 02:52:16 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Eric Dumazet bc135b23d0 net: Define accessors to manipulate QDISC_STATE_RUNNING
Define three helpers to manipulate QDISC_STATE_RUNNIG flag, that a
second patch will move on another location.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 03:23:51 -07:00