Impact: build fix
fix typo in mm/slob.c:
mm/slob.c:469: error: ‘flags’ undeclared (first use in this function)
mm/slob.c:469: error: (Each undeclared identifier is reported only once
mm/slob.c:469: error: for each function it appears in.)
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090128135457.350751756@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't hold SLOB lock when freeing the page. Reduces lock hold width. See
the following thread for discussion of the bug:
http://marc.info/?l=linux-kernel&m=123709983214143&w=2
Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Here is another version, with the incremental patch rolled up, and
added reclaim context annotation to kswapd, and allocation tracing
to slab allocators (which may only ever reach the page allocator
in rare cases, so it is good to put annotations here too).
Haven't tested this version as such, but it should be getting closer
to merge worthy ;)
--
After noticing some code in mm/filemap.c accidentally perform a __GFP_FS
allocation when it should not have been, I thought it might be a good idea to
try to catch this kind of thing with lockdep.
I coded up a little idea that seems to work. Unfortunately the system has to
actually be in __GFP_FS page reclaim, then take the lock, before it will mark
it. But at least that might still be some orders of magnitude more common
(and more debuggable) than an actual deadlock condition, so we have some
improvement I hope (the concept is no less complete than discovery of a lock's
interrupt contexts).
I guess we could even do the same thing with __GFP_IO (normal reclaim), and
even GFP_NOIO locks too... but filesystems will have the most locks and fiddly
code paths, so let's start there and see how it goes.
It *seems* to work. I did a quick test.
=================================
[ INFO: inconsistent lock state ]
2.6.28-rc6-00007-ged31348-dirty #26
---------------------------------
inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage.
modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes:
(testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]
{in-reclaim-W} state was registered at:
[<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60
[<ffffffff80268f71>] lock_acquire+0x91/0xc0
[<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310
[<ffffffffa002002b>] brd_init+0x2b/0x216 [brd]
[<ffffffff8020903b>] _stext+0x3b/0x170
[<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
[<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b
[<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 3929
hardirqs last enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310
hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310
softirqs last enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0
softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0
other info that might help us debug this:
1 lock held by modprobe/8526:
#0: (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]
stack backtrace:
Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26
Call Trace:
[<ffffffff80265483>] print_usage_bug+0x193/0x1d0
[<ffffffff80266530>] mark_lock+0xaf0/0xca0
[<ffffffff80266735>] mark_held_locks+0x55/0xc0
[<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
[<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60
[<ffffffff80285005>] __alloc_pages_internal+0x475/0x580
[<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310
[<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
[<ffffffffa002006a>] brd_init+0x6a/0x216 [brd]
[<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
[<ffffffff8020903b>] _stext+0x3b/0x170
[<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10
[<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180
[<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190
[<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
[<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 7b2cd92adc ("crypto: api - Fix
zeroing on free") added modular user of ksize(). Export that to fix
crypto.ko compilation.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
- Use NULL instead of plain 0;
- Rename slob_page() to is_slob_page();
- Define slob_page() to convert void* to struct slob_page*;
- Rename slob_new_page() to slob_new_pages();
- Define slob_free_pages() accordingly.
Compile tests only.
Signed-off-by: WANG Cong <wangcong@zeuux.org>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Impact: new tracer plugin
This patch adapts kmemtrace raw events tracing to the unified tracing API.
To enable and use this tracer, just do the following:
echo kmemtrace > /debugfs/tracing/current_tracer
cat /debugfs/tracing/trace
You will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
That was to stay backward compatible with the format output produced in
inux/tracepoint.h.
This is the default ouput, but note that I tried something else.
If you change an option:
echo kmem_minimalistic > /debugfs/trace_options
and then cat /debugfs/trace, you will have the following output:
# tracer: kmemtrace
#
#
# ALLOC TYPE REQ GIVEN FLAGS POINTER NODE CALLER
# FREE | | | | | | | |
# |
- C 0xffff88007c088780 file_free_rcu
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc780 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc870 -1 d_alloc
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
+ K 240 240 000000d0 0xffff8800790dc960 -1 d_alloc
+ K 1304 1312 000000d0 0xffff8800791d7340 -1 reiserfs_alloc_inode
- C 0xffff88007cad6000 putname
+ K 4096 4096 000000d0 0xffff88007cad6000 -1 getname
- C 0xffff88007cad6000 putname
+ K 992 1000 000000d0 0xffff880079045b58 -1 alloc_inode
+ K 768 1024 000080d0 0xffff88007c096400 -1 alloc_pipe_info
+ K 240 240 000000d0 0xffff8800790dca50 -1 d_alloc
+ K 272 320 000080d0 0xffff88007c088780 -1 get_empty_filp
+ K 272 320 000080d0 0xffff88007c088000 -1 get_empty_filp
Yeah I shall confess kmem_minimalistic should be: kmem_alternative.
Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.
On the ALLOC/FREE column, + means an allocation and - a free.
On the type column, you have K = kmalloc, C = cache, P = page
I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....
About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.
I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This adds hooks for the SLOB allocator, to allow tracing with kmemtrace.
We also convert some inline functions to __always_inline to make sure
_RET_IP_, which expands to __builtin_return_address(0), always works
as expected.
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
The kmem_cache_create() function in the slob allocator passes the SLAB
flags as GFP flags to the slob_alloc() function. The patch changes this
call to pass GFP_KERNEL as the other allocators seem to do.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the previous fix, which was completely wrong on closer
inspection. This version has been manually tested with a user-space
test harness and generates sane values. A nearly identical patch has
been boot-tested.
The problem arose from changing how kmalloc/kfree handled alignment
padding without updating ksize to match. This brings it in sync.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLOB's ksize calculation was braindamaged and generally harmlessly
underreported the allocation size. But for very small buffers, it could
in fact overreport them, leading code depending on krealloc to overrun
the allocation and trample other data.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes the obsolete and no longer used exports of ksize.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLOB reuses two page bits for internal purposes, it overlays PG_active and
PG_private. This is hidden away in slob.c. Document these overlays
explicitly in the main page-flags enum along with all the others.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although slob_alloc return NULL, __kmalloc_node returns NULL + align.
Because align always can be changed, it is very hard for debugging
problem of no page if it don't return NULL.
We have to return NULL in case of no page.
[penberg@cs.helsinki.fi: fix formatting as suggested by Matt.]
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: MinChan Kim <minchan.kim@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
This may trigger misaligned memory access exception.
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
By putting smaller objects on their own list, we greatly reduce overall
external fragmentation and increase repeatability. This reduces total SLOB
overhead from > 50% to ~6% on a simple boot test.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We weren't merging freed blocks at the beginning of the free list. Fixing
this showed a 2.5% efficiency improvement in a userspace test harness.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both slob and slub react to __GFP_ZERO by clearing the allocation, which
means that passing the GFP_ZERO bit down to the page allocator is just
wasteful and pointless.
Acked-by: Matt Mackall <mpm@selenic.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm/slub.c exports ksize(), but mm/slob.c and mm/slab.c don't.
It's used by binfmt_flat, which can be built as a module.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously, it would be possible for prev->next to point to
&free_slob_pages, and thus we would try to move a list onto itself, and
bad things would happen.
It seems a bit hairy to be doing list operations with the list marker as
an entry, rather than a head, but...
this resolves the following crash:
http://bugzilla.kernel.org/show_bug.cgi?id=9379
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A NULL pointer means that the object was not allocated. One cannot
determine the size of an object that has not been allocated. Currently we
return 0 but we really should BUG() on attempts to determine the size of
something nonexistent.
krealloc() interprets NULL to mean a zero sized object. Handle that
separately in krealloc().
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Considering kfree(NULL) would normally occur only in error paths and
kfree(ZERO_SIZE_PTR) is uncommon as well, so let's use unlikely() for the
condition check in SLUB's and SLOB's kfree() to optimize for the common
case. SLAB has this already.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The version of SLOB in -mm always scans its free list from the beginning,
which results in small allocations and free segments clustering at the
beginning of the list over time. This causes the average search to scan
over a large stretch at the beginning on each allocation.
By starting each page search where the last one left off, we evenly
distribute the allocations and greatly shorten the average search.
Without this patch, kernel compiles on a 1.5G machine take a large amount
of system time for list scanning. With this patch, compiles are within a
few seconds of performance of a SLAB kernel with no notable change in
system time.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
It becomes now easy to support the zeroing allocs with generic inline
functions in slab.h. Provide inline definitions to allow the continued use of
kzalloc, kmem_cache_zalloc etc but remove other definitions of zeroing
functions from the slab allocators and util.c.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A kernel convention for many allocators is that if __GFP_ZERO is passed to an
allocator then the allocated memory should be zeroed.
This is currently not supported by the slab allocators. The inconsistency
makes it difficult to implement in derived allocators such as in the uncached
allocator and the pool allocators.
In addition the support zeroed allocations in the slab allocators does not
have a consistent API. There are no zeroing allocator functions for NUMA node
placement (kmalloc_node, kmem_cache_alloc_node). The zeroing allocations are
only provided for default allocs (kzalloc, kmem_cache_zalloc_node).
__GFP_ZERO will make zeroing universally available and does not require any
addititional functions.
So add the necessary logic to all slab allocators to support __GFP_ZERO.
The code is added to the hot path. The gfp flags are on the stack and so the
cacheline is readily available for checking if we want a zeroed object.
Zeroing while allocating is now a frequent operation and we seem to be
gradually approaching a 1-1 parity between zeroing and not zeroing allocs.
The current tree has 3476 uses of kmalloc vs 2731 uses of kzalloc.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Define ZERO_OR_NULL_PTR macro to be able to remove the checks from the
allocators. Move ZERO_SIZE_PTR related stuff into slab.h.
Make ZERO_SIZE_PTR work for all slab allocators and get rid of the
WARN_ON_ONCE(size == 0) that is still remaining in SLAB.
Make slub return NULL like the other allocators if a too large memory segment
is requested via __kmalloc.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The size of a kmalloc object is readily available via ksize(). ksize is
provided by all allocators and thus we can implement krealloc in a generic
way.
Implement krealloc in mm/util.c and drop slab specific implementations of
krealloc.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently slob is disabled if we're using sparsemem, due to an earlier
patch from Goto-san. Slob and static sparsemem work without any trouble as
it is, and the only hiccup is a missing slab_is_available() in the case of
sparsemem extreme. With this, we're rid of the last set of restrictions
for slob usage.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds preliminary NUMA support to SLOB, primarily aimed at systems with
small nodes (tested all the way down to a 128kB SRAM block), whether
asymmetric or otherwise.
We follow the same conventions as SLAB/SLUB, preferring current node
placement for new pages, or with explicit placement, if a node has been
specified. Presently on UP NUMA this has the side-effect of preferring
node#0 allocations (since numa_node_id() == 0, though this could be
reworked if we could hand off a pfn to determine node placement), so
single-CPU NUMA systems will want to place smaller nodes further out in
terms of node id. Once a page has been bound to a node (via explicit node
id typing), we only do block allocations from partial free pages that have
a matching node id in the page flags.
The current implementation does have some scalability problems, in that all
partial free pages are tracked in the global freelist (with contention due
to the single spinlock). However, these are things that are being reworked
for SMP scalability first, while things like per-node freelists can easily
be built on top of this sort of functionality once it's been added.
More background can be found in:
http://marc.info/?l=linux-mm&m=118117916022379&w=2http://marc.info/?l=linux-mm&m=118170446306199&w=2http://marc.info/?l=linux-mm&m=118187859420048&w=2
and subsequent threads.
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the core slob allocator's minimum alignment restrictions, and instead
introduce the alignment restrictions at the slab API layer. This lets us heed
the ARCH_KMALLOC/SLAB_MINALIGN directives, and also use __alignof__ (unsigned
long) for the default alignment (which should allow relaxed alignment
architectures to take better advantage of SLOB's small minimum alignment).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the bigblock lists in favour of using compound pages and going directly
to the page allocator. Allocation size is stored in page->private, which also
makes ksize more accurate than it previously was.
Saves ~.5K of code, and 12-24 bytes overhead per >= PAGE_SIZE allocation.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improve slob by turning the freelist into a list of pages using struct page
fields, then each page has a singly linked freelist of slob blocks via a
pointer in the struct page.
- The first benefit is that the slob freelists can be indexed by a smaller
type (2 bytes, if the PAGE_SIZE is reasonable).
- Next is that freeing is much quicker because it does not have to traverse
the entire freelist. Allocation can be slightly faster too, because we can
skip almost-full freelist pages completely.
- Slob pages are then freed immediately when they become empty, rather than
having a periodic timer try to free them. This gives efficiency and memory
consumption improvement.
Then, we don't encode seperate size and next fields into each slob block,
rather we use the sign bit to distinguish between "size" or "next". Then
size 1 blocks contain a "next" offset, and others contain the "size" in
the first unit and "next" in the second unit.
- This allows minimum slob allocation alignment to go from 8 bytes to 2
bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is
best to align them to word size, however some architectures (eg. cris)
could gain space savings from turning off this extra alignment.
Then, make kmalloc use its own slob_block at the front of the allocation
in order to encode allocation size, rather than rely on not overwriting
slob's existing header block.
- This reduces kmalloc allocation overhead similarly to alignment reductions.
- Decouples kmalloc layer from the slob allocator.
Then, add a page flag specific to slob pages.
- This means kfree of a page aligned slob block doesn't have to traverse
the bigblock list.
I would get benchmarks, but my test box's network doesn't come up with
slob before this patch. I think something is timing out. Anyway, things
are faster after the patch.
Code size goes up about 1K, however dynamic memory usage _should_ be
lower even on relatively small memory systems.
Future todo item is to restore the cyclic free list search, rather than
to always begin at the start.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no user of destructors left. There is no reason why we should keep
checking for destructors calls in the slab allocators.
The RFC for this patch was discussed at
http://marc.info/?l=linux-kernel&m=117882364330705&w=2
Destructors were mainly used for list management which required them to take a
spinlock. Taking a spinlock in a destructor is a bit risky since the slab
allocators may run the destructors anytime they decide a slab is no longer
needed.
Patch drops destructor support. Any attempt to use a destructor will BUG().
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SLOB allocator should implement SLAB_DESTROY_BY_RCU correctly, because
even on UP, RCU freeing semantics are not equivalent to simply freeing
immediately. This also allows SLOB to be used on SMP.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLOB doesn't calculate correct page order when page size is not 4KB. This
patch fixes it with using get_order() instead of find_order() which is SLOB
version of get_order().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch was recently posted to lkml and acked by Pekka.
The flag SLAB_MUST_HWCACHE_ALIGN is
1. Never checked by SLAB at all.
2. A duplicate of SLAB_HWCACHE_ALIGN for SLUB
3. Fulfills the role of SLAB_HWCACHE_ALIGN for SLOB.
The only remaining use is in sparc64 and ppc64 and their use there
reflects some earlier role that the slab flag once may have had. If
its specified then SLAB_HWCACHE_ALIGN is also specified.
The flag is confusing, inconsistent and has no purpose.
Remove it.
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This introduce krealloc() that reallocates memory while keeping the contents
unchanged. The allocator avoids reallocation if the new size fits the
currently used cache. I also added a simple non-optimized version for
mm/slob.c for compatibility.
[akpm@linux-foundation.org: fix warnings]
Acked-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init
has now the __init attribute for both slab.c and slob.c. This routine
cannot be removed after init in the case of slob.c -- it serves as a timer
callback.
Provide a separate timer callback routine, call it once from kmem_cache_init,
keep the __init attribute on the latter.
Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
More cleanups for slab.h
1. Remove tabs from weird locations as suggested by Pekka
2. Drop the check for NUMA and SLAB_DEBUG from the fallback section
as suggested by Pekka.
3. Uses static inline for the fallback defs as also suggested by Pekka.
4. Make kmem_ptr_valid take a const * argument.
5. Separate the NUMA fallback definitions from the kmalloc_track fallback
definitions.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a response to an earlier discussion on linux-mm about splitting
slab.h components per allocator. Patch is against 2.6.19-git11. See
http://marc.theaimsgroup.com/?l=linux-mm&m=116469577431008&w=2
This patch cleans up the slab header definitions. We define the common
functions of slob and slab in slab.h and put the extra definitions needed
for slab's kmalloc implementations in <linux/slab_def.h>. In order to get
a greater set of common functions we add several empty functions to slob.c
and also rename slob's kmalloc to __kmalloc.
Slob does not need any special definitions since we introduce a fallback
case. If there is no need for a slab implementation to provide its own
kmalloc mess^H^H^Hacros then we simply fall back to __kmalloc functions.
That is sufficient for SLOB.
Sort the function in slab.h according to their functionality. First the
functions operating on struct kmem_cache * then the kmalloc related
functions followed by special debug and fallback definitions.
Also redo a lot of comments.
Signed-off-by: Christoph Lameter <clameter@sgi.com>?
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar
Linus Torvalds
Pekka Enberg
Nick Piggin
Nick Piggin
Kirill A. Shutemov
Américo Wang
Frederic Weisbecker
Eduard - Gabriel Munteanu
Catalin Marinas
Matt Mackall
Adrian Bunk
Alexey Dobriyan
Andy Whitcroft
MinChan Kim
Yi Li
Linus Torvalds
Tetsuo Handa
Christoph Lameter
Satyam Sharma
Paul Mundt
Akinobu Mita
Dimitri Gorokhovik