Граф коммитов

6764 Коммитов

Автор SHA1 Сообщение Дата
Christoph Hellwig 33dcb37cef dma-mapping: fix page attributes for dma_mmap_*
All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached.  But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.

Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.

Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.

Fixes: 64ccc9c033 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-10 19:52:45 +02:00
Michael Ellerman 7db57e7758 powerpc/spe: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.

Fixes errors such as below, seen with mpc85xx_defconfig:

  arch/powerpc/kernel/align.c: In function 'emulate_spe':
  arch/powerpc/kernel/align.c:178:8: error: this statement may fall through
    ret |= __get_user_inatomic(temp.v[3], p++);
        ^~

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au
2019-07-31 00:19:34 +10:00
Michael Ellerman cee3536d24 powerpc: Wire up clone3 syscall
Wire up the new clone3 syscall added in commit 7f192e3cd3 ("fork:
add clone3").

This requires a ppc_clone3 wrapper, in order to save the non-volatile
GPRs before calling into the generic syscall code. Otherwise we hit
the BUG_ON in CHECK_FULL_REGS in copy_thread().

Lightly tested using Christian's test code on a Power8 LE VM.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian Brauner <christian@brauner.io>
Link: https://lore.kernel.org/r/20190724140259.23554-1-mpe@ellerman.id.au
2019-07-29 09:34:27 +10:00
Linus Torvalds 3ea54d9b0d This is mostly a set of follow-on fixes from Mauro fixing various fallout
from the massive RST conversion; a few other small fixes as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl07C9gPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YQrgH+L7kPaRWcH+lorh7WxiIhlAvqFsR4xjRKTZV
 qZwlv3+87qjPu86DBdjRlos8PsoIkdD4+jH0u+7swYtZ5hsS8DYcfZ42i+nHqP7D
 k/XwVPW71ikpoi4vQVsO9zrwaOKPyL8AoNzlj+VpiVGAu/PYApGUfdkdOD0xxlOW
 hst6GKNAKrsoQ8fW3AIuCVi4oEEYru2FHMKLcpHBFDZtR7zgC4dEgs7UqEttAzHU
 559nkH2LKekya4pQaFMdSb6Wgj+JeIkI2XzujXES6QEdmf8vrvjkkvHeByoOYjNY
 NNdKNGhPUWrEUMfyzRQpEIcF+Dk3lYtBEDQO8+XCh6mpa9h7kQ==
 =BUU+
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3-1' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "This is mostly a set of follow-on fixes from Mauro fixing various
  fallout from the massive RST conversion; a few other small fixes as
  well"

* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
  docs: phy: Drop duplicate 'be made'
  doc:it_IT: translations in process/
  docs/vm: transhuge: fix typo in madvise reference
  doc:it_IT: rephrase statement
  doc:it_IT: align translation to mainline
  docs: load_config.py: ensure subdirs end with "/"
  docs: virtual: add it to the documentation body
  docs: remove extra conf.py files
  docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
  scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
  scripts/sphinx-pre-install: cleanup Gentoo checks
  scripts/sphinx-pre-install: fix latexmk dependencies
  scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
  scripts/sphinx-pre-install: fix script for RHEL/CentOS
  docs: conf.py: only use CJK if the font is available
  docs: conf.py: add CJK package needed by translations
  docs: pdf: add all Documentation/*/index.rst to PDF output
  docs: fix broken doc references due to renames
  docs: power: add it to to the main documentation index
  docs: powerpc: convert docs to ReST and rename to *.rst
  ...
2019-07-26 11:29:24 -07:00
Linus Torvalds bed38c3e2d powerpc fixes for 5.3 #2
An assortment of non-regression fixes that have accumulated since the start of
 the merge window.
 
 A fix for a user triggerable oops on machines where transactional memory is
 disabled, eg. Power9 bare metal, Power8 with TM disabled on the command line, or
 all Power7 or earlier machines.
 
 Three fixes for handling of PMU and power saving registers when running nested
 KVM on Power9.
 
 Two fixes for bugs found while stress testing the XIVE interrupt controller
 code, also on Power9.
 
 A fix to allow guests to boot under Qemu/KVM on Power9 using the the Hash MMU
 with >= 1TB of memory.
 
 Two fixes for bugs in the recent DMA cleanup, one of which could lead to
 checkstops.
 
 And finally three fixes for the PAPR SCM nvdimm driver.
 
 Thanks to:
   Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater, Christoph Hellwig,
   David Gibson, Gautham R. Shenoy, Michael Neuling, Oliver O'Halloran,, Satheesh
   Rajendran, Shawn Anastasio, Suraj Jitindar Singh, Vaibhav Jain.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdOF2iAAoJEFHr6jzI4aWAVmsQAJ//UY1a+lz39y/5jmkybJbH
 HVnja6ZhsKd3+ZAnljGmqr1zuwDmy8+X3pT+1832zBBm4Z1cNKj1c0wuK5fuhAfq
 o0XkO0N9GFcQu8HUPb5wSBOoyXwK0qUhExfCVobl7YsDAyAI2//nSQTwxNX3W4Hv
 P7hz48pBbiqRzQAOSHV8ZlcOBETbSVAXeNalSXrXqSJmXQbVWCQcd6vucMSwZ7S5
 ZiiL/gCBoO0kd0ZQRsGXCbwcjcR4NlTDN0M40og8Y9KTDkId8HdmJyXW3tMcZo/g
 W3LeMR94bUh/KrK88lMBrRXKUlxL+loZKWZaeNlA5+ShCYk/ZafkKri/QUX/glOq
 ahm8uqokdZ5VS1tgSYoJIKdA5qMGvv8V+CpHRJnZqaEhUCduQa5XmWPnDnEKkDt0
 94VBsk0D2vHYKyygv5JMgYHQVlU7XrQF8fw2pKShpqLMY7ZMpeDDmKN9AuzxhawF
 9b7HigbwNt5LvNJ0xn097KW+svCK7i3ZgiQe83W36wjSl2ystgjJ3T7yrH6Q1rKH
 o4loEGA4gASTDjTmWQM20lHT1xQHY4fQBC/wi/67as3m0TDeGXYI0fOZC5qtEBFr
 Ln/0e78VMhut/RWicDlRveszef1MCi1warR9R4I/bQ8M6O1BzHYsQ9zr6H111uxL
 vQ92Yp8G2PoqN7wlFlSG
 =Yc9T
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "An assortment of non-regression fixes that have accumulated since the
  start of the merge window.

   - A fix for a user triggerable oops on machines where transactional
     memory is disabled, eg. Power9 bare metal, Power8 with TM disabled
     on the command line, or all Power7 or earlier machines.

   - Three fixes for handling of PMU and power saving registers when
     running nested KVM on Power9.

   - Two fixes for bugs found while stress testing the XIVE interrupt
     controller code, also on Power9.

   - A fix to allow guests to boot under Qemu/KVM on Power9 using the
     the Hash MMU with >= 1TB of memory.

   - Two fixes for bugs in the recent DMA cleanup, one of which could
     lead to checkstops.

   - And finally three fixes for the PAPR SCM nvdimm driver.

  Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater,
  Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling,
  Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar
  Singh, Vaibhav Jain"

* tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
  powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
  powerpc/pseries: Update SCM hcall op-codes in hvcall.h
  powerpc/tm: Fix oops on sigreturn on systems without TM
  powerpc/dma: Fix invalid DMA mmap behavior
  KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
  powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
  powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA
  KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries
  powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR
  KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting
  powerpc/mm: Limit rma_size to 1TB when running without HV mode
2019-07-24 09:58:39 -07:00
Michael Neuling f16d80b75a powerpc/tm: Fix oops on sigreturn on systems without TM
On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:

  Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69
  NIP:  c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
  REGS: c00000003fffbd70 TRAP: 0700   Not tainted  (5.2.0-11045-g7142b497d8)
  MSR:  8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]>  CR: 42004242  XER: 00000000
  CFAR: c0000000000022e0 IRQMASK: 0
  GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
  GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
  GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
  GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
  GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
  GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
  NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
  LR [00007fffb2d67e48] 0x7fffb2d67e48
  Call Trace:
  Instruction dump:
  e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
  e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18

The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.

This means any local user can crash the system.

Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.

Found with sigfuz kernel selftest on P9.

This fixes CVE-2019-13648.

Fixes: 2b0a576d15 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
2019-07-22 13:05:23 +10:00
Shawn Anastasio b4fc36e60f powerpc/dma: Fix invalid DMA mmap behavior
The refactor of powerpc DMA functions in commit 6666cc17d7
("powerpc/dma: remove dma_nommu_mmap_coherent") incorrectly
changes the way DMA mappings are handled on powerpc.
Since this change, all mapped pages are marked as cache-inhibited
through the default implementation of arch_dma_mmap_pgprot.
This differs from the previous behavior of only marking pages
in noncoherent mappings as cache-inhibited and has resulted in
sporadic system crashes in certain hardware configurations and
workloads (see Bugzilla).

This commit restores the previous correct behavior by providing
an implementation of arch_dma_mmap_pgprot that only marks
pages in noncoherent mappings as cache-inhibited. As this behavior
should be universal for all powerpc platforms a new file,
dma-generic.c, was created to store it.

Fixes: 6666cc17d7 ("powerpc/dma: remove dma_nommu_mmap_coherent")
# NOTE: fixes commit 6666cc17d7 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
# NOTE: fixes commit 6666cc17d7 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Shawn Anastasio <shawn@anastas.io>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190717235437.12908-1-shawn@anastas.io
2019-07-19 21:29:49 +10:00
Mauro Carvalho Chehab 4d2e26a38f docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-17 06:57:51 -03:00
Linus Torvalds 3c69914b4c for-linus-20190715
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSxgkQAKCRCRxhvAZXjc
 opJ3AP9TWIWhEC0dzbNmzh0STj/Vyl5KYEpdMbi7HNeAmIEAfQD6A3HI4bVJbN08
 jH44U7DLzHJyHefKlB8jHEKEVYJWqgo=
 =74Bg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd and clone3 fixes from Christian Brauner:
 "This contains a bugfix for CLONE_PIDFD when used with the legacy clone
  syscall, two fixes to ensure that syscall numbering and clone3
  entrypoint implementations will stay consistent, and an update for the
  maintainers file:

   - The addition of clone3 broke CLONE_PIDFD for legacy clone on all
     architectures that use do_fork() directly instead of calling the
     clone syscall itself. (Fwiw, cleaning do_fork() up is on my todo.)

     The reason this happened was that during conversion of _do_fork()
     to use struct kernel_clone_args we missed that do_fork() is called
     directly by various architectures. This is fixed by making sure
     that the pidfd argument in struct kernel_clone_args is correctly
     initialized with the parent_tidptr argument passed down from
     do_fork(). Additionally, do_fork() missed a check to make
     CLONE_PIDFD and CLONE_PARENT_SETTID mutually exclusive just a
     clone() does. This is now fixed too.

   - When clone3() was introduced we skipped architectures that require
     special handling for fork-like syscalls. Their syscall tables did
     not contain any mention of clone3().

     To make sure that Arnd's work to make syscall numbers on all
     architectures identical (minus alpha) was not for naught we are
     placing a comment in all syscall tables that do not yet implement
     clone3(). The comment makes it clear that 435 is reserved for
     clone3 and should not be used.

   - Also, this contains a patch to make the clone3() syscall definition
     in asm-generic/unist.h conditional on __ARCH_WANT_SYS_CLONE3. This
     lets us catch new architectures that implicitly make use of clone3
     without setting __ARCH_WANT_SYS_CLONE3 which is a good indicator
     that they did not check whether it needs special treatment or not.

   - Finally, this contains a patch to add me as maintainer for pidfd
     stuff so people can start blaming me (more)"

* tag 'for-linus-20190715' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  MAINTAINERS: add new entry for pidfd api
  unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3
  arch: mark syscall number 435 reserved for clone3
  clone: fix CLONE_PIDFD support
2019-07-16 11:30:07 -07:00
Christian Brauner 1a271a68e0
arch: mark syscall number 435 reserved for clone3
A while ago Arnd made it possible to give new system calls the same
syscall number on all architectures (except alpha). To not break this
nice new feature let's mark 435 for clone3 as reserved on all
architectures that do not yet implement it.
Even if an architecture does not plan to implement it this ensures that
new system calls coming after clone3 will have the same number on all
architectures.

Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: linux-arch@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Link: https://lore.kernel.org/r/20190714192205.27190-2-christian@brauner.io
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-15 00:39:33 +02:00
Linus Torvalds 192f0f8e9d powerpc updates for 5.3
Notable changes:
 
  - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
    as some other functions only used by drivers that haven't (yet?) made it
    upstream.
 
  - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
    mem: ...) which could lead to register corruption and kernel crashes.
 
  - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
    when using the Radix MMU.
 
  - A large but incremental rewrite of our exception handling code to use gas
    macros rather than multiple levels of nested CPP macros.
 
 And the usual small fixes, cleanups and improvements.
 
 Thanks to:
   Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
   Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
   Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
   Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
   Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
   Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
   Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
   Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
   Bauermann, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdKVoLAAoJEFHr6jzI4aWA0kIP/A6shIbbE7H5W2hFrqt/PPPK
 3+VrvPKbOFF+W6hcE/RgSZmEnUo0svdNjHUd/eMfFS1vb/uRt2QDdrsHUNNwURQL
 M2mcLXFwYpnjSjb/XMgDbHpAQxjeGfTdYLonUIejN7Rk8KQUeLyKQ3SBn6kfMc46
 DnUUcPcjuRGaETUmVuZZ4e40ZWbJp8PKDrSJOuUrTPXMaK5ciNbZk5mCWXGbYl6G
 BMQAyv4ld/417rNTjBEP/T2foMJtioAt4W6mtlgdkOTdIEZnFU67nNxDBthNSu2c
 95+I+/sML4KOp1R4yhqLSLIDDbc3bg3c99hLGij0d948z3bkSZ8bwnPaUuy70C4v
 U8rvl/+N6C6H3DgSsPE/Gnkd8DnudqWY8nULc+8p3fXljGwww6/Qgt+6yCUn8BdW
 WgixkSjKgjDmzTw8trIUNEqORrTVle7cM2hIyIK2Q5T4kWzNQxrLZ/x/3wgoYjUa
 1KwIzaRo5JKZ9D3pJnJ5U+knE2/90rJIyfcp0W6ygyJsWKi2GNmq1eN3sKOw0IxH
 Tg86RENIA/rEMErNOfP45sLteMuTR7of7peCG3yumIOZqsDVYAzerpvtSgip2cvK
 aG+9HcYlBFOOOF9Dabi8GXsTBLXLfwiyjjLSpA9eXPwW8KObgiNfTZa7ujjTPvis
 4mk9oukFTFUpfhsMmI3T
 =3dBZ
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...
2019-07-13 16:08:36 -07:00
Oliver O'Halloran 3343962068 powerpc/eeh: Handle hugepages in ioremap space
In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap
space") support for using hugepages in the vmalloc and ioremap areas was
enabled for radix. Unfortunately this broke EEH MMIO error checking.

Detection works by inserting a hook which checks the results of the
ioreadXX() set of functions.  When a read returns a 0xFFs response we
need to check for an error which we do by mapping the (virtual) MMIO
address back to a physical address, then mapping physical address to a
PCI device via an interval tree.

When translating virt -> phys we currently assume the ioremap space is
only populated by PAGE_SIZE mappings. If a hugepage mapping is found we
emit a WARN_ON(), but otherwise handles the check as though a normal
page was found. In pathalogical cases such as copying a buffer
containing a lot of 0xFFs from BAR memory this can result in the system
not booting because it's too busy printing WARN_ON()s.

There's no real reason to assume huge pages can't be present and we're
prefectly capable of handling them, so do that.

Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
2019-07-12 01:02:09 +10:00
Linus Torvalds 5450e8a316 pidfd-updates-v5.3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXSMhUgAKCRCRxhvAZXjc
 okkiAQC3Hlg/O2JoIb4PqgEvBkpHSdVxyuWagn0ksjACW9ANKQEAl5OadMhvOq16
 UHGhKlpE/M8HflknIffoEGlIAWHrdwU=
 =7kP5
 -----END PGP SIGNATURE-----

Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd updates from Christian Brauner:
 "This adds two main features.

   - First, it adds polling support for pidfds. This allows process
     managers to know when a (non-parent) process dies in a race-free
     way.

     The notification mechanism used follows the same logic that is
     currently used when the parent of a task is notified of a child's
     death. With this patchset it is possible to put pidfds in an
     {e}poll loop and get reliable notifications for process (i.e.
     thread-group) exit.

   - The second feature compliments the first one by making it possible
     to retrieve pollable pidfds for processes that were not created
     using CLONE_PIDFD.

     A lot of processes get created with traditional PID-based calls
     such as fork() or clone() (without CLONE_PIDFD). For these
     processes a caller can currently not create a pollable pidfd. This
     is a problem for Android's low memory killer (LMK) and service
     managers such as systemd.

  Both patchsets are accompanied by selftests.

  It's perhaps worth noting that the work done so far and the work done
  in this branch for pidfd_open() and polling support do already see
  some adoption:

   - Android is in the process of backporting this work to all their LTS
     kernels [1]

   - Service managers make use of pidfd_send_signal but will need to
     wait until we enable waiting on pidfds for full adoption.

   - And projects I maintain make use of both pidfd_send_signal and
     CLONE_PIDFD [2] and will use polling support and pidfd_open() too"

[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22
    https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22

[2] aab6e3eb73/src/lxc/start.c (L1753)

* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add pidfd_open() tests
  arch: wire-up pidfd_open()
  pid: add pidfd_open()
  pidfd: add polling selftests
  pidfd: add polling support
2019-07-10 22:17:21 -07:00
Michael Ellerman 0fc12c022a powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
When CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is enabled (uncommon), we have a
series of WARN_ON's in arch_local_irq_restore().

These are "should never happen" conditions, but if they do happen they
can flood the console and render the system unusable. So switch them
to WARN_ON_ONCE().

Fixes: e2b36d5917 ("powerpc/64: Don't trace code that runs with the soft irq mask unreconciled")
Fixes: 9b81c0211c ("powerpc/64s: make PACA_IRQ_HARD_DIS track MSR[EE] closely")
Fixes: 7c0482e3d0 ("powerpc/irq: Fix another case of lazy IRQ state getting out of sync")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190708061046.7075-1-mpe@ellerman.id.au
2019-07-10 13:20:43 +10:00
Linus Torvalds cf2d213e49 Power management updates for 5.3-rc1
- Improve the handling of shared ACPI power resources in the PCI
    bus type layer (Mika Westerberg).
 
  - Make the PCI layer take link delays required by the PCIe spec
    into account as appropriate and avoid polling devices in D3cold
    for PME (Mika Westerberg).
 
  - Fix some corner case issues in ACPI device power management and
    in the PCI bus type layer, optimiza and clean up the handling of
    runtime-suspended PCI devices during system-wide transitions to
    sleep states (Rafael Wysocki).
 
  - Rework hibernation handling in the ACPI core and the PCI bus type
    to resume runtime-suspended devices before hibernation (which
    allows some functional problems to be avoided) and fix some ACPI
    power management issues related to hiberation (Rafael Wysocki).
 
  - Extend the operating performance points (OPP) framework to support
    a wider range of devices (Rajendra Nayak, Stehpen Boyd).
 
  - Fix issues related to genpd_virt_devs and issues with platforms
    using the set_opp() callback in the OPP framework (Viresh Kumar,
    Dmitry Osipenko).
 
  - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).
 
  - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).
 
  - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210,
    and armada-37xx cpufreq drivers (David Arcari, Florian Fainelli,
    Paweł Chmiel, YueHaibing).
 
  - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).
 
  - Fix minor issue in the ACPI system sleep support code and export
    one function from it (Lenny Szubowicz, Dexuan Cui).
 
  - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
    Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
    Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).
 
  - Update the pm-graph utility to v5.4 (Todd Brandt).
 
  - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl0jK18SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxgEAP/RbPe71Y9ufKu64L3EtgV6mS9iuLEhux
 /Ad9laLNeM1b0oceT3QxGk7xQCacnZcBlcaqXVWI4NRsn4RBZp1cYZngpgJ9DP6E
 ONr8hzyzDOMVReba3XJIF8H+WoTKjywMYtFutjdx6dRe2ZJLutqnuZ0JbH1YSSK7
 IxOt0mJVALf2M4Zz7F17d+n3yGE/4xAPBVbj/rBRcTEsGYlR/Hoxs7iF6EBau7fy
 R5drUH6XSrWk8adc+z7l3BTGqMMYj9deRSfAWB3wpM4YK7Fv7msX/amBoGINkdn6
 xP/ZcrHvhKKzE89MS8OUGP4rGVwq+7tu6mktnYL/tpKgutJqqx5LVvrLsGDSWr+W
 /aJExN8Eb4Jh98C6vog3XUJoqBxkVGbU8qoCBU3jlFsaznFEWjW9IKhBHs5CIaqz
 MXte6AsJ8lvFzxILjvx0m2206wNpRJRXYLX3a/BSBxa4OgOESjIpBTmbPfOwbxwj
 8z9hIVlDTTDtnF6BEyDQr1fjPi3Mxl7ibGnoqRrJm36VKBy9VZNNwG/0Y2oSvm6k
 Es8CiTWA3A/46dCZxGr18/9Vbfxn1Yvg9QZ1lCE5Fqij+0F2yRApbHZgUro+1rji
 6J8OWC5r5JccdKuGHh4RH/asMFhD0cAR/gUsRzS4dz/wz2jVIN1FstdD1aKN5GBy
 d0lchx/AKR5H
 =aBN3
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These update PCI and ACPI power management (improved handling of ACPI
  power resources and PCIe link delays, fixes related to corner cases,
  hibernation handling rework), fix and extend the operating performance
  points (OPP) framework, add new cpufreq drivers for Raspberry Pi and
  imx8m chips, update some other cpufreq drivers, clean up assorted
  pieces of PM code and documentation and update tools.

  Specifics:

   - Improve the handling of shared ACPI power resources in the PCI bus
     type layer (Mika Westerberg).

   - Make the PCI layer take link delays required by the PCIe spec into
     account as appropriate and avoid polling devices in D3cold for PME
     (Mika Westerberg).

   - Fix some corner case issues in ACPI device power management and in
     the PCI bus type layer, optimiza and clean up the handling of
     runtime-suspended PCI devices during system-wide transitions to
     sleep states (Rafael Wysocki).

   - Rework hibernation handling in the ACPI core and the PCI bus type
     to resume runtime-suspended devices before hibernation (which
     allows some functional problems to be avoided) and fix some ACPI
     power management issues related to hiberation (Rafael Wysocki).

   - Extend the operating performance points (OPP) framework to support
     a wider range of devices (Rajendra Nayak, Stehpen Boyd).

   - Fix issues related to genpd_virt_devs and issues with platforms
     using the set_opp() callback in the OPP framework (Viresh Kumar,
     Dmitry Osipenko).

   - Add new cpufreq driver for Raspberry Pi (Nicolas Saenz Julienne).

   - Add new cpufreq driver for imx8m and imx7d chips (Leonard Crestez).

   - Fix and clean up the pcc-cpufreq, brcmstb-avs-cpufreq, s5pv210, and
     armada-37xx cpufreq drivers (David Arcari, Florian Fainelli, Paweł
     Chmiel, YueHaibing).

   - Clean up and fix the cpufreq core (Viresh Kumar, Daniel Lezcano).

   - Fix minor issue in the ACPI system sleep support code and export
     one function from it (Lenny Szubowicz, Dexuan Cui).

   - Clean up assorted pieces of PM code and documentation (Kefeng Wang,
     Andy Shevchenko, Bart Van Assche, Greg Kroah-Hartman, Fuqian Huang,
     Geert Uytterhoeven, Mathieu Malaterre, Rafael Wysocki).

   - Update the pm-graph utility to v5.4 (Todd Brandt).

   - Fix and clean up the cpupower utility (Abhishek Goel, Nick Black)"

* tag 'pm-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (57 commits)
  ACPI: PM: Make acpi_sleep_state_supported() non-static
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Unexport acpi_device_get_power()
  Documentation: ABI: power: Add missing newline at end of file
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()
  cpufreq: Consolidate cpufreq_update_current_freq() and __cpufreq_get()
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  cpufreq: Don't skip frequency validation for has_target() drivers
  PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()
  PCI / ACPI: Add _PR0 dependent devices
  ACPI / PM: Introduce concept of a _PR0 dependent device
  PCI / ACPI: Use cached ACPI device state to get PCI device power state
  ACPI: PM: Allow transitions to D0 to occur in special cases
  ACPI: PM: Avoid evaluating _PS3 on transitions from D3hot to D3cold
  cpufreq: Use has_target() instead of !setpolicy
  ...
2019-07-09 10:05:22 -07:00
Linus Torvalds 5ad18b2e60 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...
2019-07-08 21:48:15 -07:00
Linus Torvalds e0e86b111b Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug updates from Thomas Gleixner:
 "A small set of updates for SMP and CPU hotplug:

   - Abort disabling secondary CPUs in the freezer when a wakeup is
     pending instead of evaluating it only after all CPUs have been
     offlined.

   - Remove the shared annotation for the strict per CPU cfd_data in the
     smp function call core code.

   - Remove the return values of smp_call_function() and on_each_cpu()
     as they are unconditionally 0. Fixup the few callers which actually
     bothered to check the return value"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Remove smp_call_function() and on_each_cpu() return values
  smp: Do not mark call_function_data as shared
  cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending
  cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
2019-07-08 10:39:56 -07:00
Linus Torvalds dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
Rafael J. Wysocki 3dbeb44854 Merge branch 'pm-sleep'
* pm-sleep:
  PM: sleep: Drop dev_pm_skip_next_resume_phases()
  ACPI: PM: Drop unused function and function header
  ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
  ACPI: PM: Simplify and fix PM domain hibernation callbacks
  PCI: PM: Simplify bus-level hibernation callbacks
  PM: ACPI/PCI: Resume all devices during hibernation
  kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset()
  PM: sleep: Update struct wakeup_source documentation
  drivers: base: power: remove wakeup_sources_stats_dentry variable
  PM: suspend: Rename pm_suspend_via_s2idle()
  PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take
  PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
2019-07-08 10:51:25 +02:00
Christophe Leroy a2b6f26c26 powerpc/module64: Use symbolic instructions names.
To increase readability/maintainability, replace hard coded
instructions values by symbolic names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Fix R_PPC64_ENTRY case, the addi reads from r2 not r12]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06 00:29:50 +10:00
Christophe Leroy 4eb4516ead powerpc/module32: Use symbolic instructions names.
To increase readability/maintainability, replace hard coded
instructions values by symbolic names.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06 00:29:50 +10:00
Christophe Leroy 7f9c929a7f powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
PPC_HA() PPC_HI() and PPC_LO() macros are nice macros. Move them
from module64.c to ppc-opcode.h in order to use them in other places.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clean up formatting in new code, drop duplicates in ftrace.c]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06 00:29:50 +10:00
Michael Ellerman 2fb0a2c989 powerpc/module64: Fix comment in R_PPC64_ENTRY handling
The comment here is wrong, the addi reads from r2 not r12. The code is
correct, 0x38420000 = addi r2,r2,0.

Fixes: a61674bdfc ("powerpc/module: Handle R_PPC64_ENTRY relocations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-06 00:29:50 +10:00
Christophe Leroy 22e9c88d48 powerpc/64: reuse PPC32 static inline flush_dcache_range()
This patch drops the assembly PPC64 version of flush_dcache_range()
and re-uses the PPC32 static inline version.

With GCC 8.1, the following code is generated:

void flush_test(unsigned long start, unsigned long stop)
{
	flush_dcache_range(start, stop);
}

0000000000000130 <.flush_test>:
 130:	3d 22 00 00 	addis   r9,r2,0
			132: R_PPC64_TOC16_HA	.data+0x8
 134:	81 09 00 00 	lwz     r8,0(r9)
			136: R_PPC64_TOC16_LO	.data+0x8
 138:	3d 22 00 00 	addis   r9,r2,0
			13a: R_PPC64_TOC16_HA	.data+0xc
 13c:	80 e9 00 00 	lwz     r7,0(r9)
			13e: R_PPC64_TOC16_LO	.data+0xc
 140:	7d 48 00 d0 	neg     r10,r8
 144:	7d 43 18 38 	and     r3,r10,r3
 148:	7c 00 04 ac 	hwsync
 14c:	4c 00 01 2c 	isync
 150:	39 28 ff ff 	addi    r9,r8,-1
 154:	7c 89 22 14 	add     r4,r9,r4
 158:	7c 83 20 50 	subf    r4,r3,r4
 15c:	7c 89 3c 37 	srd.    r9,r4,r7
 160:	41 82 00 1c 	beq     17c <.flush_test+0x4c>
 164:	7d 29 03 a6 	mtctr   r9
 168:	60 00 00 00 	nop
 16c:	60 00 00 00 	nop
 170:	7c 00 18 ac 	dcbf    0,r3
 174:	7c 63 42 14 	add     r3,r3,r8
 178:	42 00 ff f8 	bdnz    170 <.flush_test+0x40>
 17c:	7c 00 04 ac 	hwsync
 180:	4c 00 01 2c 	isync
 184:	4e 80 00 20 	blr
 188:	60 00 00 00 	nop
 18c:	60 00 00 00 	nop

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05 02:06:37 +10:00
Christophe Leroy 1cfb725fb1 powerpc/64: flush_inval_dcache_range() becomes flush_dcache_range()
On most arches having function flush_dcache_range(), including PPC32,
this function does a writeback and invalidation of the cache bloc.

On PPC64, flush_dcache_range() only does a writeback while
flush_inval_dcache_range() does the invalidation in addition.

In addition it looks like within arch/powerpc/, there are no PPC64
platforms using flush_dcache_range()

This patch drops the existing 64 bits version of flush_dcache_range()
and renames flush_inval_dcache_range() into flush_dcache_range().

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-05 01:35:10 +10:00
Alexey Kardashevskiy dead1c845d powerpc/pci/of: Parse unassigned resources
The pseries platform uses the PCI_PROBE_DEVTREE method of PCI probing
which reads "assigned-addresses" of every PCI device and initializes
the device resources. However if the property is missing or zero sized,
then there is no fallback of any kind and the PCI resources remain
undiscovered, i.e. pdev->resource[] array remains empty.

This adds a fallback which parses the "reg" property in pretty much same
way except it marks resources as "unset" which later make Linux assign
those resources proper addresses.

This has an effect when:
1. a hypervisor failed to assign any resource for a device;
2. /chosen/linux,pci-probe-only=0 is in the DT so the system may try
assigning a resource.
Neither is likely to happen under PowerVM.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Alexey Kardashevskiy efd176a04b powerpc/pseries/dma: Allow SWIOTLB
The commit 8617a5c5bc ("powerpc/dma: handle iommu bypass in
dma_iommu_ops") merged direct DMA ops into the IOMMU DMA ops allowing
SWIOTLB as well but only for mapping; the unmapping and bouncing parts
were left unmodified.

This adds missing direct unmapping calls to .unmap_page() and
.unmap_sg().

This adds missing sync callbacks and directs them to the direct DMA
hooks.

Fixes: 8617a5c5bc ("powerpc/dma: handle iommu bypass in dma_iommu_ops")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Christoph Hellwig 24911acd64 powerpc: remove device_to_mask()
Use the dma_get_mask() helper from dma-mapping.h instead, as they are
functionally identical.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Michael Neuling a278e7ea60 powerpc: Fix compile issue with force DAWR
If you compile with KVM but without CONFIG_HAVE_HW_BREAKPOINT you fail
at linking with:
  arch/powerpc/kvm/book3s_hv_rmhandlers.o:(.text+0x708): undefined reference to `dawr_force_enable'

This was caused by commit c1fe190c06 ("powerpc: Add force enable of
DAWR on P9 option").

This moves a bunch of code around to fix this. It moves a lot of the
DAWR code in a new file and creates a new CONFIG_PPC_DAWR to enable
compiling it.

Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Minor formatting in set_dawr()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Mathieu Malaterre 548c54acba powerpc: silence a -Wcast-function-type warning in dawr_write_file_bool
In commit c1fe190c06 ("powerpc: Add force enable of DAWR on P9
option") the following piece of code was added:

   smp_call_function((smp_call_func_t)set_dawr, &null_brk, 0);

Since GCC 8 this triggers the following warning about incompatible
function types:

  arch/powerpc/kernel/hw_breakpoint.c:408:21: error: cast between incompatible function types from 'int (*)(struct arch_hw_breakpoint *)' to 'void (*)(void *)' [-Werror=cast-function-type]

Since the warning is there for a reason, and should not be hidden behind
a cast, provide an intermediate callback function to avoid the warning.

Fixes: c1fe190c06 ("powerpc: Add force enable of DAWR on P9 option")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Nicholas Piggin fe7946ce08 powerpc/64s: Rename PPC_INVALIDATE_ERAT to PPC_ISA_3_0_INVALIDATE_ERAT
This makes it clear to the caller that it can only be used on POWER9
and later CPUs.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use "ISA_3_0" rather than "ARCH_300"]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Nicholas Piggin 293c2e27b9 powerpc/64s/exception: simplify hmi control flow
Branch to the relocated 0xc000 address early (still in real mode), to
simplify subsequent branches. Have the virt mode handler avoid just
'windup' and redo the exception from scratch, rather than branching
back to the trampoline.

Rearrange the stack setup instruction location to match the system
reset handler (e.g., right before EXCEPTION_PROLOG_COMMON).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Nicholas Piggin f34c9675ca powerpc/64s/exception: hmi remove special case macro
No code change.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Nicholas Piggin acc8da4492 powerpc/64s/exception: sreset move trampoline ahead of common code
Follow convention and move tramp ahead of common.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:19:35 +10:00
Nicholas Piggin 0e10be2bb9 powerpc/64s/exception: optimise system_reset for idle, clean up non-idle case
The idle wake up code in the system reset interrupt is not very
optimal. There are two requirements: perform idle wake up quickly;
and save everything including CFAR for non-idle interrupts, with
no performance requirement.

The problem with placing the idle test in the middle of the handler
and using the normal handler code to save CFAR, is that it's quite
costly (e.g., mfcfar is serialising, speculative workarounds get
applied, SRR1 has to be reloaded, etc). It also prevents the standard
interrupt handler boilerplate being used.

This pain can be avoided by using a dedicated idle interrupt handler
at the start of the interrupt handler, which restores all registers
back to the way they were in case it was not an idle wake up. CFAR
is preserved without saving it before the non-idle case by making that
the fall-through, and idle is a taken branch.

Performance seems to be in the noise, but possibly around 0.5% faster,
the executed instructions certainly look better. The bigger benefit is
being able to drop in standard interrupt handlers after the idle code,
which helps with subsequent cleanup and consolidation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup BE by using DOTSYM for idle_return_gpr_loss call]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-03 15:18:46 +10:00
Nicholas Piggin 0a882e2846 powerpc/64s/exception: remove bad stack branch
The bad stack test in interrupt handlers has a few problems. For
performance it is taken in the common case, which is a fetch bubble
and a waste of i-cache.

For code development and maintainence, it requires yet another stack
frame setup routine, and that constrains all exception handlers to
follow the same register save pattern which inhibits future
optimisation.

Remove the test/branch and replace it with a trap. Teach the program
check handler to use the emergency stack for this case.

This does not result in quite so nice a message, however the SRR0 and
SRR1 of the crashed interrupt can be seen in r11 and r12, as is the
original r1 (adjusted by INT_FRAME_SIZE). These are the most important
parts to debugging the issue.

The original r9-12 and cr0 is lost, which is the main downside.

  kernel BUG at linux/arch/powerpc/kernel/exceptions-64s.S:847!
  Oops: Exception in kernel mode, sig: 5 [#1]
  BE SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted
  NIP:  c000000000009108 LR: c000000000cadbcc CTR: c0000000000090f0
  REGS: c0000000fffcbd70 TRAP: 0700   Not tainted
  MSR:  9000000000021032 <SF,HV,ME,IR,DR,RI>  CR: 28222448  XER: 20040000
  CFAR: c000000000009100 IRQMASK: 0
  GPR00: 000000000000003d fffffffffffffd00 c0000000018cfb00 c0000000f02b3166
  GPR04: fffffffffffffffd 0000000000000007 fffffffffffffffb 0000000000000030
  GPR08: 0000000000000037 0000000028222448 0000000000000000 c000000000ca8de0
  GPR12: 9000000002009032 c000000001ae0000 c000000000010a00 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: c0000000f00322c0 c000000000f85200 0000000000000004 ffffffffffffffff
  GPR24: fffffffffffffffe 0000000000000000 0000000000000000 000000000000000a
  GPR28: 0000000000000000 0000000000000000 c0000000f02b391c c0000000f02b3167
  NIP [c000000000009108] decrementer_common+0x18/0x160
  LR [c000000000cadbcc] .vsnprintf+0x3ec/0x4f0
  Call Trace:
  Instruction dump:
  996d098a 994d098b 38610070 480246ed 48005518 60000000 38200000 718a4000
  7c2a0b78 3821fd00 41c20008 e82d0970 <0981fd00> f92101a0 f9610170 f9810178

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin f30a5e68f0 powerpc/tm: update comment about interrupt re-entrancy
Since the system reset interrupt began to use its own stack, and
machine check interrupts have done so for some time, r1 can be
changed without clearing MSR[RI], provided no other interrupts
(including SLB misses) are taken.

MSR[RI] does have to be cleared when using SCRATCH0, however.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin d7fb34c704 powerpc/64s/exception: move SET_SCRATCH0 into EXCEPTION_PROLOG_0
No generated code change.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin 904f81f3f3 powerpc/64s/exception: denorm handler use standard scratch save macro
Although the 0x1500 interrupt only applies to bare metal, it is better
to just use the standard macro for scratch save.

Runtime code path remains unchanged (due to instruction patching).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin 02a1258154 powerpc/64s/exception: machine check use standard macros to save dar/dsisr
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin 5312c4941e powerpc/64s/exception: add dar and dsisr options to exception macro
Some exception entry requires DAR and/or DSISR to be saved into the
paca exception save area. Add options to the standard exception
macros for these.

Generated code changes slightly due to code structure.

-     554:      a6 02 72 7d     mfdsisr r11
-     558:      a8 00 4d f9     std     r10,168(r13)
-     55c:      b0 00 6d 91     stw     r11,176(r13)
+     554:      a8 00 4d f9     std     r10,168(r13)
+     558:      a6 02 52 7d     mfdsisr r10
+     55c:      b0 00 4d 91     stw     r10,176(r13)

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:49 +10:00
Nicholas Piggin 391e941b89 powerpc/64s/exception: use common macro for windup
No generated code change.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin b113c08341 powerpc/64s/exception: shuffle windup code around
Restore all SPRs and CR up-front, these are longer latency
instructions. Move register restore around to maximise pairs of
adjacent loads (e.g., restore r0 next to r1).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin 67d4160a61 powerpc/64s/exception: simplify hmi windup code
Duplicate the hmi windup code for both cases, rather than to put a
special case branch in the middle of it. Remove unused label. This
helps with later code consolidation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin ad73d8d4f4 powerpc/64s/exception: move machine check windup in_mce handling
Move in_mce decrement earlier before registers are restored (but
still after RI=0). This helps with later consolidation.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin 9592b29a9c powerpc/64s/exception: windup use r9 consistently to restore SPRs
Trivial code change, r3->r9.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin fbc50063a2 powerpc/64s/exception: mtmsrd L=1 cleanup
All supported 64s CPUs support mtmsrd L=1 instruction, so a cleanup
can be made in sreset and mce handlers.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin 63d60d0c69 powerpc/64s/exception: avoid SPR RAW scoreboard stall in real mode entry
Move SPR reads ahead of writes. Real mode entry that is not a KVM
guest is rare these days, but bad practice propagates.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin b0b2a93da4 powerpc/64s/exception: clean up system call entry
syscall / hcall entry unnecessarily differs between KVM and non-KVM
builds. Move the SMT priority instruction to the same location
(after INTERRUPT_TO_KERNEL).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:48 +10:00
Nicholas Piggin 1582009113 powerpc/64s/exception: move paca save area offsets into exception-64s.S
No generated code change.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-02 21:39:20 +10:00