Граф коммитов

1052 Коммитов

Автор SHA1 Сообщение Дата
Chanho Min 0ea8530dcf crypto: add lz4 Cryptographic API
Add support for lz4 and lz4hc compression algorithm using the lib/lz4/*
codebase.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Linus Torvalds b2c311075d Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Do not idle omap device between crypto operations in one session.
 - Added sha224/sha384 shims for SSSE3.
 - More optimisations for camellia-aesni-avx2.
 - Removed defunct blowfish/twofish AVX2 implementations.
 - Added unaligned buffer self-tests.
 - Added PCLMULQDQ optimisation for CRCT10DIF.
 - Added support for Freescale's DCP co-processor
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
  crypto: testmgr - test hash implementations with unaligned buffers
  crypto: testmgr - test AEADs with unaligned buffers
  crypto: testmgr - test skciphers with unaligned buffers
  crypto: testmgr - check that entries in alg_test_descs are in correct order
  Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
  Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
  crypto: camellia-aesni-avx2 - tune assembly code for more performance
  hwrng: bcm2835 - fix MODULE_LICENSE tag
  hwrng: nomadik - use clk_prepare_enable()
  crypto: picoxcell - replace strict_strtoul() with kstrtoul()
  crypto: dcp - Staticize local symbols
  crypto: dcp - Use NULL instead of 0
  crypto: dcp - Use devm_* APIs
  crypto: dcp - Remove redundant platform_set_drvdata()
  hwrng: use platform_{get,set}_drvdata()
  crypto: omap-aes - Don't idle/start AES device between Encrypt operations
  crypto: crct10dif - Use PTR_RET
  crypto: ux500 - Cocci spatch "resource_size.spatch"
  crypto: sha256_ssse3 - add sha224 support
  crypto: sha512_ssse3 - add sha384 support
  ...
2013-07-05 12:12:33 -07:00
Bartlomiej Zolnierkiewicz 48a9db462d drivers/dma: remove unused support for MEMSET operations
There have never been any real users of MEMSET operations since they
have been introduced in January 2007 by commit 7405f74bad ("dmaengine:
refactor dmaengine around dma_async_tx_descriptor").  Therefore remove
support for them for now, it can be always brought back when needed.

[sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Acked-by: Dan Williams <djbw@fb.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:42 -07:00
Kees Cook d8537548c9 drivers: avoid format strings in names passed to alloc_workqueue()
For the workqueue creation interfaces that do not expect format strings,
make sure they cannot accidently be parsed that way.  Additionally, clean
up calls made with a single parameter that would be handled as a format
string.  Many callers are passing potentially dynamic string content, so
use "%s" in those cases to avoid any potential accidents.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:41 -07:00
Kees Cook 1c8fca1d92 crypto: sanitize argument for format string
The template lookup interface does not provide a way to use format
strings, so make sure that the interface cannot be abused accidentally.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:25 -07:00
Herbert Xu 939e177996 crypto: algboss - Hold ref count on larval
On Thu, Jun 20, 2013 at 10:00:21AM +0200, Daniel Borkmann wrote:
> After having fixed a NULL pointer dereference in SCTP 1abd165e ("net:
> sctp: fix NULL pointer dereference in socket destruction"), I ran into
> the following NULL pointer dereference in the crypto subsystem with
> the same reproducer, easily hit each time:
> 
> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<ffffffff81070321>] __wake_up_common+0x31/0x90
> PGD 0
> Oops: 0000 [#1] SMP
> Modules linked in: padlock_sha(F-) sha256_generic(F) sctp(F) libcrc32c(F) [..]
> CPU: 6 PID: 3326 Comm: cryptomgr_probe Tainted: GF            3.10.0-rc5+ #1
> Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011
> task: ffff88007b6cf4e0 ti: ffff88007b7cc000 task.ti: ffff88007b7cc000
> RIP: 0010:[<ffffffff81070321>]  [<ffffffff81070321>] __wake_up_common+0x31/0x90
> RSP: 0018:ffff88007b7cde08  EFLAGS: 00010082
> RAX: ffffffffffffffe8 RBX: ffff88003756c130 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff88003756c130
> RBP: ffff88007b7cde48 R08: 0000000000000000 R09: ffff88012b173200
> R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000282
> R13: ffff88003756c138 R14: 0000000000000000 R15: 0000000000000000
> FS:  0000000000000000(0000) GS:ffff88012fc60000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000007e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Stack:
>  ffff88007b7cde28 0000000300000000 ffff88007b7cde28 ffff88003756c130
>  0000000000000282 ffff88003756c128 ffffffff81227670 0000000000000000
>  ffff88007b7cde78 ffffffff810722b7 ffff88007cdcf000 ffffffff81a90540
> Call Trace:
>  [<ffffffff81227670>] ? crypto_alloc_pcomp+0x20/0x20
>  [<ffffffff810722b7>] complete_all+0x47/0x60
>  [<ffffffff81227708>] cryptomgr_probe+0x98/0xc0
>  [<ffffffff81227670>] ? crypto_alloc_pcomp+0x20/0x20
>  [<ffffffff8106760e>] kthread+0xce/0xe0
>  [<ffffffff81067540>] ? kthread_freezable_should_stop+0x70/0x70
>  [<ffffffff815450dc>] ret_from_fork+0x7c/0xb0
>  [<ffffffff81067540>] ? kthread_freezable_should_stop+0x70/0x70
> Code: 41 56 41 55 41 54 53 48 83 ec 18 66 66 66 66 90 89 75 cc 89 55 c8
>       4c 8d 6f 08 48 8b 57 08 41 89 cf 4d 89 c6 48 8d 42 e
> RIP  [<ffffffff81070321>] __wake_up_common+0x31/0x90
>  RSP <ffff88007b7cde08>
> CR2: 0000000000000000
> ---[ end trace b495b19270a4d37e ]---
> 
> My assumption is that the following is happening: the minimal SCTP
> tool runs under ``echo 1 > /proc/sys/net/sctp/auth_enable'', hence
> it's making use of crypto_alloc_hash() via sctp_auth_init_hmacs().
> It forks itself, heavily allocates, binds, listens and waits in
> accept on sctp sockets, and then randomly kills some of them (no
> need for an actual client in this case to hit this). Then, again,
> allocating, binding, etc, and then killing child processes.
> 
> The problem that might be happening here is that cryptomgr requests
> the module to probe/load through cryptomgr_schedule_probe(), but
> before the thread handler cryptomgr_probe() returns, we return from
> the wait_for_completion_interruptible() function and probably already
> have cleared up larval, thus we run into a NULL pointer dereference
> when in cryptomgr_probe() complete_all() is being called.
> 
> If we wait with wait_for_completion() instead, this panic will not
> occur anymore. This is valid, because in case a signal is pending,
> cryptomgr_probe() returns from probing anyway with properly calling
> complete_all().

The use of wait_for_completion_interruptible is intentional so that
we don't lock up the thread if a bug causes us to never wake up.

This bug is caused by the helper thread using the larval without
holding a reference count on it.  If the helper thread completes
after the original thread requesting for help has gone away and
destroyed the larval, then we get the crash above.

So the fix is to hold a reference count on the larval.

Cc: <stable@vger.kernel.org> # 3.6+
Reported-by: Daniel Borkmann <dborkman@redhat.com>
Tested-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-25 19:15:17 +08:00
Jussi Kivilinna da5ffe1134 crypto: testmgr - test hash implementations with unaligned buffers
This patch adds unaligned buffer tests for hashes.

The first new test is with one byte offset and the second test checks if
cra_alignmask for driver is big enough; for example, for testing a case
where cra_alignmask is set to 7, but driver really needs buffers to be
aligned to 16 bytes.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:31 +08:00
Jussi Kivilinna 58dcf5484c crypto: testmgr - test AEADs with unaligned buffers
This patch adds unaligned buffer tests for AEADs.

The first new test is with one byte offset and the second test checks if
cra_alignmask for driver is big enough; for example, for testing a case
where cra_alignmask is set to 7, but driver really needs buffers to be
aligned to 16 bytes.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:30 +08:00
Jussi Kivilinna 3a338f20c3 crypto: testmgr - test skciphers with unaligned buffers
This patch adds unaligned buffer tests for blkciphers.

The first new test is with one byte offset and the second test checks if
cra_alignmask for driver is big enough; for example, for testing a case
where cra_alignmask is set to 7, but driver really needs buffers to be
aligned to 16 bytes.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:30 +08:00
Jussi Kivilinna 5714758b5c crypto: testmgr - check that entries in alg_test_descs are in correct order
Patch adds check for alg_test_descs list order, so that accidentically
misplaced entries are found quicker. Duplicate entries are also checked for.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:29 +08:00
Jussi Kivilinna 99f42f937a Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
This reverts commit cf1521a1a5.

Instruction (vpgatherdd) that this implementation relied on turned out to be
slow performer on real hardware (i5-4570). The previous 8-way twofish/AVX
implementation is therefore faster and this implementation should be removed.

Converting this implementation to use the same method as in twofish/AVX for
table look-ups would give additional ~3% speed up vs twofish/AVX, but would
hardly be worth of the added code and binary size.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:29 +08:00
Jussi Kivilinna 3d387ef08c Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
This reverts commit 6048801070.

Instruction (vpgatherdd) that this implementation relied on turned out to be
slow performer on real hardware (i5-4570). The previous 4-way blowfish
implementation is therefore faster and this implementation should be removed.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-21 14:44:28 +08:00
Jussi Kivilinna edb7c7cdba crypto: blowfish - disable AVX2 implementation
It appears that the performance of 'vpgatherdd' is suboptimal for this kind of
workload (tested on Core i5-4570) and causes blowfish-avx2 to be significantly
slower than blowfish-amd64. So disable the AVX2 implementation to avoid
performance regressions.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-05 16:33:23 +08:00
Jussi Kivilinna 3ef91f21a6 crypto: twofish - disable AVX2 implementation
It appears that the performance of 'vpgatherdd' is suboptimal for this kind of
workload (tested on Core i5-4570) and causes twofish_avx2 to be significantly
slower than twofish_avx. So disable the AVX2 implementation to avoid
performance regressions.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-06-05 16:33:22 +08:00
Jussi Kivilinna d329581493 crypto: sha512_generic - set cra_driver_name
'sha512_generic' should set driver name now that there is alternative sha512
provider (sha512_ssse3).

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-28 15:43:04 +08:00
Tim Chen 39761214ee crypto: crct10dif - Simple correctness and speed test for CRCT10DIF hash
These are simple tests to do sanity check of CRC T10 DIF hash.  The
correctness of the transform can be checked with the command
	modprobe tcrypt mode=47
The speed of the transform can be evaluated with the command
	modprobe tcrypt mode=320

Set the cpu frequency to constant and turn turbo off when running the
speed test so the frequency governor will not tweak the frequency and
affects the measurements.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-24 17:55:27 +08:00
Tim Chen 0b95a7f857 crypto: crct10dif - Glue code to cast accelerated CRCT10DIF assembly as a crypto transform
Glue code that plugs the PCLMULQDQ accelerated CRC T10 DIF hash into the
crypto framework.  The config CRYPTO_CRCT10DIF_PCLMUL should be turned
on to enable the feature.  The crc_t10dif crypto library function will
use this faster algorithm when crct10dif_pclmul module is loaded.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-24 17:55:27 +08:00
Tim Chen 2d31e518a4 crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework
When CRC T10 DIF is calculated using the crypto transform framework, we
wrap the crc_t10dif function call to utilize it.  This allows us to
take advantage of any accelerated CRC T10 DIF transform that is
plugged into the crypto framework.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-20 20:11:01 +08:00
Linus Torvalds f8ce1faf55 We get rid of the general module prefix confusion with a binary config option,
fix a remove/insert race which Never Happens, and (my favorite) handle the
 case when we have too many modules for a single commandline.  Seriously,
 the kernel is full, please go away!
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgbGEAAoJENkgDmzRrbjx2+QP/jXs93K/sXw3rL0vBklwCFv6
 IPZmqYZiGjrzqlB4coWkgYRwW1oOsREfAjF5MmfPdykS3fO5kXfdxN4FBdfKp+IZ
 RdsycdGDuSxWomgYsivrrxLBDxDAX1VuBOjr6mu5Uuk/pCjFa61cfJDiErsu0jKz
 2EMTc98A+E71XamJdvbtal5MUIu9yeluJWG2ux2+VbCul4MSpMc//0n2nrws/RCB
 AoC96AT/Xf4U10a8zT8RfCJ29M5Vvx/KfTIcFiZvtCQxEaHNNmj831gDNiw/3jFI
 ndRph+VLHBsMoBMxfzNRrM+evqkq8+AGEGRj3ycQy5Pa6DunPyzMafWOVGBGnmaS
 tl9hATGx1438048i5tUn8ieAYG1YL1HM83hQovpCThfUKQMiq186iDt1SYYmlq3g
 0thj3znQqZDYhboPtgWzOMUdqOG/iBIKjhGQjjHZs+MInFgxL2hmax0gBNkvEtQb
 oLyfGbF6UjS7I/Md/HohnUQ4xr9kYa3MQeqPjKbRwgHRkdXhzTEZtI+MYDJBxOnW
 QGVQ97aJ2WA7vC7sz/1VhTcZqmU5zfrSc8lF+Ea+H8dQGHHbz8HxKQacEvKcMrXl
 OJyEkRUWDA0MTjeIHzn2fff9Q6/qqA1QejRiFofGJrpxopcJS84/7yA0repxvuMG
 yaMPsLq53UW37/AXYsho
 =MPiD
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.
2013-05-05 10:58:06 -07:00
Linus Torvalds 797994f81a Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:

 - XTS mode optimisation for twofish/cast6/camellia/aes on x86

 - AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia

 - SSSE3/AVX/AVX2 optimisations for sha256/sha512

 - Added driver for SAHARA2 crypto accelerator

 - Fix for GMAC when used in non-IPsec secnarios

 - Added generic CMAC implementation (including IPsec glue)

 - IP update for crypto/atmel

 - Support for more than one device in hwrng/timeriomem

 - Added Broadcom BCM2835 RNG driver

 - Misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits)
  crypto: caam - fix job ring cleanup code
  crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
  crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
  crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
  crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
  crypto: tcrypt - add async cipher speed tests for blowfish
  crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
  crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
  crypto: aesni_intel - add more optimized XTS mode for x86-64
  crypto: x86/camellia-aesni-avx - add more optimized XTS code
  crypto: cast6-avx: use new optimized XTS code
  crypto: x86/twofish-avx - use optimized XTS code
  crypto: x86 - add more optimized XTS-mode for serpent-avx
  xfrm: add rfc4494 AES-CMAC-96 support
  crypto: add CMAC support to CryptoAPI
  crypto: testmgr - add empty test vectors for null ciphers
  crypto: testmgr - add AES GMAC test vectors
  crypto: gcm - fix rfc4543 to handle async crypto correctly
  crypto: gcm - make GMAC work when dst and src are different
  hwrng: timeriomem - added devicetree hooks
  ...
2013-05-02 14:53:12 -07:00
Akinobu Mita 3ec39abdcc raid6test: use prandom_bytes()
Use prandom_bytes() to generate random bytes for test data.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Dan Williams <djbw@fb.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:42 -07:00
Jussi Kivilinna f3f935a76a crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
Patch adds AVX2/AES-NI/x86-64 implementation of Camellia cipher, requiring
32 parallel blocks for input (512 bytes). Compared to AVX implementation, this
version is extended to use the 256-bit wide YMM registers. For AES-NI
instructions data is split to two 128-bit registers and merged afterwards.
Even with this additional handling, performance should be higher compared
to the AES-NI/AVX implementation.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:07 +08:00
Jussi Kivilinna 56d76c96a9 crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
Patch adds AVX2/x86-64 implementation of Serpent cipher, requiring 16 parallel
blocks for input (256 bytes). Implementation is based on the AVX implementation
and extends to use the 256-bit wide YMM registers. Since serpent does not use
table look-ups, this implementation should be close to two times faster than
the AVX implementation.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:07 +08:00
Jussi Kivilinna cf1521a1a5 crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
Patch adds AVX2/x86-64 implementation of Twofish cipher, requiring 16 parallel
blocks for input (256 bytes). Table look-ups are performed using vpgatherdd
instruction directly from vector registers and thus should be faster than
earlier implementations. Implementation also uses 256-bit wide YMM registers,
which should give additional speed up compared to the AVX implementation.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:05 +08:00
Jussi Kivilinna 6048801070 crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
Patch adds AVX2/x86-64 implementation of Blowfish cipher, requiring 32 parallel
blocks for input (256 bytes). Table look-ups are performed using vpgatherdd
instruction directly from vector registers and thus should be faster than
earlier implementations.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:04 +08:00
Jussi Kivilinna ad8b7c3e92 crypto: tcrypt - add async cipher speed tests for blowfish
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:03 +08:00
Jussi Kivilinna 23a836e87d crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:09:03 +08:00
Jussi Kivilinna 7643a11a35 crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
The Kconfig setting for glue helper module is CRYPTO_GLUE_HELPER_X86, but
recent change for aesni_intel used CRYPTO_GLUE_HELPER instead. Patch corrects
this issue.

Cc: kbuild-all@01.org
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:53 +08:00
Jussi Kivilinna c456a9cd1a crypto: aesni_intel - add more optimized XTS mode for x86-64
Add more optimized XTS code for aesni_intel in 64-bit mode, for smaller stack
usage and boost for speed.

tcrypt results, with Intel i5-2450M:
256-bit key
        enc     dec
16B     0.98x   0.99x
64B     0.64x   0.63x
256B    1.29x   1.32x
1024B   1.54x   1.58x
8192B   1.57x   1.60x

512-bit key
        enc     dec
16B     0.98x   0.99x
64B     0.60x   0.59x
256B    1.24x   1.25x
1024B   1.39x   1.42x
8192B   1.38x   1.42x

I chose not to optimize smaller than block size of 256 bytes, since XTS is
practically always used with data blocks of size 512 bytes. This is why
performance is reduced in tcrypt for 64 byte long blocks.

Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:53 +08:00
Jussi Kivilinna 93b5e86a6d crypto: add CMAC support to CryptoAPI
Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI.

This work is based on Tom St Denis' earlier patch,
 http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2

Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:47 +08:00
Jussi Kivilinna e448370d73 crypto: testmgr - add empty test vectors for null ciphers
Without these, kernel log shows:
[    5.984881] alg: No test for cipher_null (cipher_null-generic)
[    5.985096] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[    5.985170] alg: No test for compress_null (compress_null-generic)
[    5.985297] alg: No test for digest_null (digest_null-generic)

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:47 +08:00
Jussi Kivilinna e9b7441a99 crypto: testmgr - add AES GMAC test vectors
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:47 +08:00
Jussi Kivilinna d733ac90f9 crypto: gcm - fix rfc4543 to handle async crypto correctly
If the gcm cipher used by rfc4543 does not complete request immediately,
the authentication tag is not copied to destination buffer. Patch adds
correct async logic for this case.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:47 +08:00
Jussi Kivilinna 9489667d3e crypto: gcm - make GMAC work when dst and src are different
The GMAC code assumes that dst==src, which causes problems when trying to add
rfc4543(gcm(aes)) test vectors.

So fix this code to work when source and destination buffer are different.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:46 +08:00
Tim Chen 87de4579f9 crypto: sha512 - Create module providing optimized SHA512 routines using SSSE3, AVX or AVX2 instructions.
We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA512 x86_64 assembly routines.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:42 +08:00
Tim Chen bf70fa9d9e crypto: sha512 - Expose generic sha512 routine to be callable from other modules
Other SHA512 routines may need to use the generic routine when
FPU is not available.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:00:57 +08:00
Tim Chen 8275d1aa64 crypto: sha256 - Create module providing optimized SHA256 routines using SSSE3, AVX or AVX2 instructions.
We added glue code and config options to create crypto
module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:00:57 +08:00
Linus Torvalds 7790ff45be Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This fixes a kernel memory leak in the algif interface"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif - suppress sending source address information in recvmsg
2013-04-22 07:07:46 -07:00
Chun-Yi Lee 04b00bdb41 X.509: Support parse long form of length octets in Authority Key Identifier
Per X.509 spec in 4.2.1.1 section, the structure of Authority Key
Identifier Extension is:

   AuthorityKeyIdentifier ::= SEQUENCE {
      keyIdentifier             [0] KeyIdentifier           OPTIONAL,
      authorityCertIssuer       [1] GeneralNames            OPTIONAL,
      authorityCertSerialNumber [2] CertificateSerialNumber OPTIONAL  }

   KeyIdentifier ::= OCTET STRING

When a certificate also provides
authorityCertIssuer and authorityCertSerialNumber then the length of
AuthorityKeyIdentifier SEQUENCE is likely to long form format.
e.g.
   The example certificate demos/tunala/A-server.pem in openssl source:

X509v3 Authority Key Identifier:
    keyid:49:FB:45:72:12:C4:CC:E1:45:A1:D3:08:9E:95:C4:2C:6D:55:3F:17
    DirName:/C=NZ/L=Wellington/O=Really Irresponsible Authorisation Authority (RIAA)/OU=Cert-stamping/CN=Jackov al-Trades/emailAddress=none@fake.domain
    serial:00

Current parsing rule of OID_authorityKeyIdentifier only take care the
short form format, it causes load certificate to modsign_keyring fail:

[   12.061147] X.509: Extension: 47
[   12.075121] MODSIGN: Problem loading in-kernel X.509 certificate (-74)

So, this patch add the parsing rule for support long form format against
Authority Key Identifier.

v3:
Changed the size check in "Short Form length" case, we allow v[3] smaller
then (vlen - 4) because authorityCertIssuer and authorityCertSerialNumber
are also possible attach in AuthorityKeyIdentifier sequence.

v2:
 - Removed comma from author's name.
 - Moved 'Short Form length' comment inside the if-body.
 - Changed the type of sub to size_t.
 - Use ASN1_INDEFINITE_LENGTH rather than writing 0x80 and 127.
 - Moved the key_len's value assignment before alter v.
 - Fixed the typo of octets.
 - Add 2 to v before entering the loop for calculate the length.
 - Removed the comment of check vlen.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-22 11:32:19 +09:30
Mathias Krause 72a763d805 crypto: algif - suppress sending source address information in recvmsg
The current code does not set the msg_namelen member to 0 and therefore
makes net/socket.c leak the local sockaddr_storage variable to userland
-- 128 bytes of kernel stack memory. Fix that.

Cc: <stable@vger.kernel.org> # 2.6.38
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-10 14:26:06 +08:00
Linus Torvalds d02a9a89db Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This fixes a GCM bug that breaks IPsec and a compile problem in
  ux500."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ux500 - add missing comma
  crypto: gcm - fix assumption that assoc has one segment
2013-04-09 20:19:50 -07:00
Tim Chen 35d2c9d0c3 crypto: sha256 - Expose SHA256 generic routine to be callable externally.
Other SHA256 routine may need to use the generic routine when
FPU is not available.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-03 09:06:31 +08:00
Jussi Kivilinna d3dde52209 crypto: gcm - fix assumption that assoc has one segment
rfc4543(gcm(*)) code for GMAC assumes that assoc scatterlist always contains
only one segment and only makes use of this first segment. However ipsec passes
assoc with three segments when using 'extended sequence number' thus in this
case rfc4543(gcm(*)) fails to function correctly. Patch fixes this issue.

Reported-by: Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com>
Tested-by: Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-02 17:56:15 +08:00
Mathias Krause a84fb791cb crypto: user - constify netlink dispatch table
There is no need to modify the netlink dispatch table at runtime and
making it const even makes the resulting object file slightly smaller.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-03-10 16:46:43 +08:00
Linus Torvalds b0af9cd9aa lzo-update-signature-20130226
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iD8DBQBRLQ9iTWFXqwsgQ8kRAvK/AJ9HUkhHJsukjw35XEQPkhfwNs/XPgCglXB1
 dF0wRbbL4d6pE9IloUsgYLg=
 =JSSN
 -----END PGP SIGNATURE-----

Merge tag 'lzo-update-signature-20130226' of git://github.com/markus-oberhumer/linux

Pull LZO compression update from Markus Oberhumer:
 "Summary:
  ========

  Update the Linux kernel LZO compression and decompression code to the
  current upstream version which features significant performance
  improvements on modern machines.

  Some *synthetic* benchmarks:
  ============================

    x86_64 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :         150 MB/sec          468 MB/sec
    LZO-2012    :         434 MB/sec         1210 MB/sec

    i386 (Sandy Bridge), gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :         143 MB/sec          409 MB/sec
    LZO-2012    :         372 MB/sec         1121 MB/sec

    armv7 (Cortex-A9), Linaro gcc-4.6 -O3, Silesia test corpus, 256 kB block-size:

                     compression speed   decompression speed

    LZO-2005    :          27 MB/sec           84 MB/sec
    LZO-2012    :          44 MB/sec          117 MB/sec
  **LZO-2013-UA :          47 MB/sec          167 MB/sec

  Legend:

    LZO-2005    : LZO version in current 3.8 kernel (which is based on
                     the LZO 2.02 release from 2005)
    LZO-2012    : updated LZO version available in linux-next
  **LZO-2013-UA : updated LZO version available in linux-next plus experimental
                     ARM Unaligned Access patch. This needs approval
                     from some ARM maintainer ist NOT YET INCLUDED."

Andrew Morton <akpm@linux-foundation.org> acks it and says:
 "There's a new LZ4 on the block which is even faster than the sped-up
  LZO, but various filesystems and things use LZO"

* tag 'lzo-update-signature-20130226' of git://github.com/markus-oberhumer/linux:
  crypto: testmgr - update LZO compression test vectors
  lib/lzo: Update LZO compression to current upstream version
  lib/lzo: Rename lzo1x_decompress.c to lzo1x_decompress_safe.c
2013-02-28 20:45:52 -08:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Linus Torvalds 5115f3c19d Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
 "This is fairly big pull by my standards as I had missed last merge
  window.  So we have the support for device tree for slave-dmaengine,
  large updates to dw_dmac driver from Andy for reusing on different
  architectures.  Along with this we have fixes on bunch of the drivers"

Fix up trivial conflicts, usually due to #include line movement next to
each other.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits)
  Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"
  ARM: dts: pl330: Add #dma-cells for generic dma binding support
  DMA: PL330: Register the DMA controller with the generic DMA helpers
  DMA: PL330: Add xlate function
  DMA: PL330: Add new pl330 filter for DT case.
  dma: tegra20-apb-dma: remove unnecessary assignment
  edma: do not waste memory for dma_mask
  dma: coh901318: set residue only if dma is in progress
  dma: coh901318: avoid unbalanced locking
  dmaengine.h: remove redundant else keyword
  dma: of-dma: protect list write operation by spin_lock
  dmaengine: ste_dma40: do not remove descriptors for cyclic transfers
  dma: of-dma.c: fix memory leakage
  dw_dmac: apply default dma_mask if needed
  dmaengine: ioat - fix spare sparse complain
  dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c
  ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING
  dw_dmac: add support for Lynxpoint DMA controllers
  dw_dmac: return proper residue value
  dw_dmac: fill individual length of descriptor
  ...
2013-02-26 09:24:48 -08:00
Herbert Xu ca81a1a1b8 crypto: crc32c - Kill pointless CRYPTO_CRC32C_X86_64 option
This bool option can never be set to anything other than y.  So
let's just kill it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-02-26 17:52:15 +08:00
Linus Torvalds 32dc43e40a Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.9:

   - Added accelerated implementation of crc32 using pclmulqdq.

   - Added test vector for fcrypt.

   - Added support for OMAP4/AM33XX cipher and hash.

   - Fixed loose crypto_user input checks.

   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (43 commits)
  crypto: user - ensure user supplied strings are nul-terminated
  crypto: user - fix empty string test in report API
  crypto: user - fix info leaks in report API
  crypto: caam - Added property fsl,sec-era in SEC4.0 device tree binding.
  crypto: use ERR_CAST
  crypto: atmel-aes - adjust duplicate test
  crypto: crc32-pclmul - Kill warning on x86-32
  crypto: x86/twofish - assembler clean-ups: use ENTRY/ENDPROC, localize jump labels
  crypto: x86/sha1 - assembler clean-ups: use ENTRY/ENDPROC
  crypto: x86/serpent - use ENTRY/ENDPROC for assember functions and localize jump targets
  crypto: x86/salsa20 - assembler cleanup, use ENTRY/ENDPROC for assember functions and rename ECRYPT_* to salsa20_*
  crypto: x86/ghash - assembler clean-up: use ENDPROC at end of assember functions
  crypto: x86/crc32c - assembler clean-up: use ENTRY/ENDPROC
  crypto: cast6-avx: use ENTRY()/ENDPROC() for assembler functions
  crypto: cast5-avx: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: camellia-x86_64/aes-ni: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: blowfish-x86_64: use ENTRY()/ENDPROC() for assembler functions and localize jump targets
  crypto: aesni-intel - add ENDPROC statements for assembler functions
  crypto: x86/aes - assembler clean-ups: use ENTRY/ENDPROC, localize jump targets
  crypto: testmgr - add test vector for fcrypt
  ...
2013-02-25 15:56:15 -08:00
Linus Torvalds 9d3cae26ac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
 "So from the depth of frozen Minnesota, here's the powerpc pull request
  for 3.9.  It has a few interesting highlights, in addition to the
  usual bunch of bug fixes, minor updates, embedded device tree updates
  and new boards:

   - Hand tuned asm implementation of SHA1 (by Paulus & Michael
     Ellerman)

   - Support for Doorbell interrupts on Power8 (kind of fast
     thread-thread IPIs) by Ian Munsie

   - Long overdue cleanup of the way we handle relocation of our open
     firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard

   - Support for saving/restoring & context switching the PPR (Processor
     Priority Register) on server processors that support it.  This
     allows the kernel to preserve thread priorities established by
     userspace.  By Haren Myneni.

   - DAWR (new watchpoint facility) support on Power8 by Michael Neuling

   - Ability to change the DSCR (Data Stream Control Register) which
     controls cache prefetching on a running process via ptrace by
     Alexey Kardashevskiy

   - Support for context switching the TAR register on Power8 (new
     branch target register meant to be used by some new specific
     userspace perf event interrupt facility which is yet to be enabled)
     by Ian Munsie.

   - Improve preservation of the CFAR register (which captures the
     origin of a branch) on various exception conditions by Paulus.

   - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where
     it belongs by Philippe De Muyter

   - Support for Transactional Memory on Power8 by Michael Neuling
     (based on original work by Matt Evans).  For those curious about
     the feature, the patch contains a pretty good description."

(See commit db8ff907027b: "powerpc: Documentation for transactional
memory on powerpc" for the mentioned description added to the file
Documentation/powerpc/transactional_memory.txt)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits)
  powerpc/kexec: Disable hard IRQ before kexec
  powerpc/85xx: l2sram - Add compatible string for BSC9131 platform
  powerpc/85xx: bsc9131 - Correct typo in SDHC device node
  powerpc/e500/qemu-e500: enable coreint
  powerpc/mpic: allow coreint to be determined by MPIC version
  powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct
  powerpc/85xx: Board support for ppa8548
  powerpc/fsl: remove extraneous DIU platform functions
  arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test
  powerpc: Documentation for transactional memory on powerpc
  powerpc: Add transactional memory to pseries and ppc64 defconfigs
  powerpc: Add config option for transactional memory
  powerpc: Add transactional memory to POWER8 cpu features
  powerpc: Add new transactional memory state to the signal context
  powerpc: Hook in new transactional memory code
  powerpc: Routines for FP/VSX/VMX unavailable during a transaction
  powerpc: Add transactional memory unavaliable execption handler
  powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes
  powerpc: Add FP/VSX and VMX register load functions for transactional memory
  powerpc: Add helper functions for transactional memory context switching
  ...
2013-02-23 17:09:55 -08:00