Граф коммитов

12618 Коммитов

Автор SHA1 Сообщение Дата
Jakub Kicinski aec53e60e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
  commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
  commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
  https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/

net/smc/smc_wr.c
  commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
  commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
  bitmap_zero()/memset() is removed by the fix

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-30 12:12:12 -08:00
Linus Torvalds a4cc5ea443 - only enable pci_remap_iospace() for Ralink devices
-----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmG/DtkaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAmSA/9E+u2lGZKybIKiKSU9AT/
 nDpgEQqbT/Z29OS9VsV4CjLBpQLv44EbER9IxhemfsytOEfZPveY/X/RzLSNDYKx
 DqB2a+vPynpTtKyMvkIhh1lcze1ZmR9s87S4CB38mQ+5/0asSpofIr0y2nAwTmFz
 CLa2cyhy3se35SjmoTxdFAKonOG0MZ7OJoI0qiPUhAg+XlYI9Z8D2yllhrwl5GiN
 AUDbR88RZBmfrEJS6p4TlHZgE4eV893uzQLxQtrChu9HJPAeouMvCXsQBQLZJRu7
 r9n3koM6XY77Xxm1qZB3xHKdfxBojSBj3kJvgwbgZDYILROLdOVempMdCnOONJyZ
 WThmjx8/MUMC0X/U4ECjGT7D6XALksWA2qHTKScl3tqOZu/wQGrMVYqjIz2B1gtJ
 DEyhmm+fKHkhpnMY19Bby6tpd1OkjO0Wg5dsTpWAub94XZi2Xq0T2n9qKQytwy5t
 y6Sdsb6f9e4MH0/kAzHbKakNT5v5eDx8k2h3zNFtBzvQZLmlbYeDO5aLKsfuyvNQ
 YvDFVf1fRrTaHv5AffVhgNYP6LjNKFMpte1aPiU5iBEdEnKs17uMKaSM9g5hEm23
 yHf2TcsEotteg1iXxgZr5akY3tPE9wFYmDU5EKp3xv19s6ODj9pbBIZE/ujgHcOt
 SgaBNwy/qK0N5rHXSOrSZSA=
 =IyrT
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fix from Thomas Bogendoerfer:

 - only enable pci_remap_iospace() for Ralink devices

* tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Only define pci_remap_iospace() for Ralink
2021-12-19 11:40:11 -08:00
Jakub Kicinski be3158290d Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:

====================
bpf-next 2021-12-10 v2

We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).

The main changes are:

1) Various samples fixes, from Alexander Lobakin.

2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.

3) A batch of new unified APIs for libbpf, logging improvements, version
   querying, etc. Also a batch of old deprecations for old APIs and various
   bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.

4) BPF documentation reorganization and improvements, from Christoph Hellwig
   and Dave Tucker.

5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
   libbpf, from Hengqi Chen.

6) Verifier log fixes, from Hou Tao.

7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.

8) Extend branch record capturing to all platforms that support it,
   from Kajol Jain.

9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.

10) bpftool doc-generating script improvements, from Quentin Monnet.

11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.

12) Deprecation warning fix for perf/bpf_counter, from Song Liu.

13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
    from Tiezhu Yang.

14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.

15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
    Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
    and others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
  libbpf: Add "bool skipped" to struct bpf_map
  libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
  bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
  selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
  selftests/bpf: Add test for libbpf's custom log_buf behavior
  selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
  libbpf: Deprecate bpf_object__load_xattr()
  libbpf: Add per-program log buffer setter and getter
  libbpf: Preserve kernel error code and remove kprobe prog type guessing
  libbpf: Improve logging around BPF program loading
  libbpf: Allow passing user log setting through bpf_object_open_opts
  libbpf: Allow passing preallocated log_buf when loading BTF into kernel
  libbpf: Add OPTS-based bpf_btf_load() API
  libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
  samples/bpf: Remove unneeded variable
  bpf: Remove redundant assignment to pointer t
  selftests/bpf: Fix a compilation warning
  perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
  samples: bpf: Fix 'unknown warning group' build warning on Clang
  samples: bpf: Fix xdp_sample_user.o linking with Clang
  ...
====================

Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10 15:56:13 -08:00
Tiezhu Yang 09d97da660 MIPS: Only define pci_remap_iospace() for Ralink
After commit 9f76779f24 ("MIPS: implement architecture-specific
'pci_remap_iospace()'"), there exists the following warning on the
Loongson64 platform:

    loongson-pci 1a000000.pci:       IO 0x0018020000..0x001803ffff -> 0x0000020000
    loongson-pci 1a000000.pci:      MEM 0x0040000000..0x007fffffff -> 0x0040000000
    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
    resource start address is not zero
    ...
    Call Trace:
    [<ffffffff8020dc78>] show_stack+0x40/0x120
    [<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
    [<ffffffff8023a0b0>] __warn+0xe0/0x110
    [<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
    [<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
    [<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
    [<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
    [<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
    [<ffffffff80819454>] loongson_pci_probe+0x34/0x160
    [<ffffffff809203cc>] platform_probe+0x6c/0xe0
    [<ffffffff8091d5d4>] really_probe+0xbc/0x340
    [<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
    [<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
    [<ffffffff8091dea0>] __driver_attach+0x80/0x118
    [<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
    [<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
    [<ffffffff8091ead4>] driver_register+0x8c/0x150
    [<ffffffff80200a8c>] do_one_initcall+0x54/0x288
    [<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
    [<ffffffff80cfc380>] kernel_init+0x2c/0x134
    [<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
    ---[ end trace e4a0efe10aa5cce6 ]---
    loongson-pci 1a000000.pci: error -19: failed to map resource [io  0x20000-0x3ffff]

We can see that the resource start address is 0x0000020000, because
the ISA Bridge used the zero address which is defined in the dts file
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:

    ISA Bridge: /bus@10000000/isa@18000000
    IO 0x0000000018000000..0x000000001801ffff  ->  0x0000000000000000

Based on the above analysis, the architecture-specific pci_remap_iospace()
is not suitable for Loongson64, we should only define pci_remap_iospace()
for Ralink on MIPS based on the commit background.

Fixes: 9f76779f24 ("MIPS: implement architecture-specific 'pci_remap_iospace()'")
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-12-09 10:22:24 +01:00
Jakub Kicinski 6efcdadc15 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
bpf 2021-12-08

We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).

The main changes are:

1) Fix an off-by-two error in packet range markings and also add a batch of
   new tests for coverage of these corner cases, from Maxim Mikityanskiy.

2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.

3) Fix two functional regressions and a build warning related to BTF kfunc
   for modules, from Kumar Kartikeya Dwivedi.

4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
   PREEMPT_RT kernels, from Sebastian Andrzej Siewior.

5) Add missing includes in order to be able to detangle cgroup vs bpf header
   dependencies, from Jakub Kicinski.

6) Fix regression in BPF sockmap tests caused by missing detachment of progs
   from sockets when they are removed from the map, from John Fastabend.

7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
   dispatcher, from Björn Töpel.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add selftests to cover packet access corner cases
  bpf: Fix the off-by-two error in range markings
  treewide: Add missing includes masked by cgroup -> bpf dependency
  tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
  bpf: Fix bpf_check_mod_kfunc_call for built-in modules
  bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
  mips, bpf: Fix reference to non-existing Kconfig symbol
  bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
  Documentation/locking/locktypes: Update migrate_disable() bits.
  bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
  bpf, sockmap: Attach map progs to psock early for feature probes
  bpf, x86: Fix "no previous prototype" warning
====================

Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08 16:06:44 -08:00
Johan Almbladh 099f83aa2d mips, bpf: Fix reference to non-existing Kconfig symbol
The Kconfig symbol for R10000 ll/sc errata workaround in the MIPS JIT was
misspelled, causing the workaround to not take effect when enabled.

Fixes: 72570224bb ("mips, bpf: Add JIT workarounds for CPU errata")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130160824.3781635-1-johan.almbladh@anyfinetworks.com
2021-11-30 17:19:36 +01:00
Linus Torvalds 6be088036c - build fix for ZSTD enabled configs
- fix for preempt warning
 - fix for loongson FTLB detection
 - fix for page table level selection
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmGh/OQaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHC8NQ/8DV03cPvb1HTLsm6TJlm2
 g8gZCF2ofoFQ6KGaTHOgQTQvtA30hy2ubpay/VgNFPfbiHNRXUF5Lf/5giIFawcu
 lxk89c0eUOZE57Y1ceBxsMROhxtTOS2yTEII6HpN1P177E2Pv0gD/tHqXSVoUAYQ
 1quGmq7xhE9X0S09PL1EI+z9Bcm3CSA1YLTipHBJBBAp+VD3c0yYI+jmYkDqd0qn
 toOWhhPZUyypr6rU1A7vb/88CaqVHMUXJqAsL40KP1Fs+vl2ASMwmbjU6VQMpt0V
 95NExNaqxHsL5SvV47nhzdnv+Limo51xVGzdn8dAee4O/+eVkGvGKnfw3BTcqzK1
 7YzzAsXmUs3iyE5GLMNUNH6MPwQGnSAQDL/bm86o2ZjPq3zDuDEbjLPIeoTX/Nxf
 x8M5XHKtrumaoY2aeIi73U2tirwpxuhg/HG+FgaOXy72ktVZFw83ARQxiLt8Jj0b
 hV5i8HqzypY5egjeUVMhPCyjCxlkhI66P6wWZVV+kHxd8X65qt9Y0kgo+OAf41sU
 2qsJBW2wk87Y+EPtLodsLot7FHA5FWL1OWm32ftZXGWysIQf+TM8oU0DvXs+3pd2
 GqMWxwvBrhkc534flH/72TUMnvStLMC8vTmL0SxEwDrhukk+8DI7xgNni/MGgLy7
 B4rV8e6KY/B3lvAo5fZ+tjc=
 =I9cB
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_5.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - build fix for ZSTD enabled configs

 - fix for preempt warning

 - fix for loongson FTLB detection

 - fix for page table level selection

* tag 'mips-fixes_5.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
  MIPS: loongson64: fix FTLB configuration
  MIPS: Fix using smp_processor_id() in preemptible in show_cpuinfo()
  MIPS: boot/compressed/: add __ashldi3 to target for ZSTD compression
2021-11-27 09:50:31 -08:00
Linus Torvalds 79941493ff Fixes for 5.16 folios:
- Fix compilation warnings on csky and sparc
  - Rename multipage folios to large folios
  - Rename AS_THP_SUPPORT and FS_THP_SUPPORT
  - Add functions to zero portions of a folio
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmGem6wACgkQDpNsjXcp
 gj7uvwgAjNqDWOVgwYU98daN6nKQQf5Vv35f0bzeKcKcHIOEWZ2+MUeXkI55h8TD
 ss5L3O86sPtQmpKUQJJChZC4AhpIPRyjPA0JW6vYqXQd912M331WpGgFFyX5eI+3
 OxfKLRULmopeWP1RjWmkWqlhYQHL5OLgAMC4VaBSfDHd1UMRf+F9JNm9qR7GCp9Q
 Vb0qcmBMaQYt/K5sWRQyPUACVTF+27RLKAs+Om37NGekv1UqgOPMzi9nAyi9RjCi
 rRY6oGupNgC+Y41jzlpaNoL71RPS92H769FBh/Fe4qu55VSPjfcN77qAnVhX5Ykn
 4RhzZcEUoqlx9xG9xynk0mmbx2Bf4g==
 =kvqM
 -----END PGP SIGNATURE-----

Merge tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache

Pull folio fixes from Matthew Wilcox:
 "In the course of preparing the folio changes for iomap for next merge
  window, we discovered some problems that would be nice to address now:

   - Renaming multi-page folios to large folios.

     mapping_multi_page_folio_support() is just a little too long, so we
     settled on mapping_large_folio_support(). That meant renaming, eg
     folio_test_multi() to folio_test_large().

     Rename AS_THP_SUPPORT to match

   - I hadn't included folio wrappers for zero_user_segments(), etc.
     Also, multi-page^W^W large folio support is now independent of
     CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
     to fall back to the out-of-line zero_user_segments().

     Remove FS_THP_SUPPORT to match

   - The build bots finally got round to telling me that I missed a
     couple of architectures when adding flush_dcache_folio(). Christoph
     suggested that we just add linux/cacheflush.h and not rely on
     asm-generic/cacheflush.h"

* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
  mm: Add functions to zero portions of a folio
  fs: Rename AS_THP_SUPPORT and mapping_thp_support
  fs: Remove FS_THP_SUPPORT
  mm: Remove folio_test_single
  mm: Rename folio_test_multi to folio_test_large
  Add linux/cacheflush.h
2021-11-25 10:13:56 -08:00
Huang Pei 41ce097f71 MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48
It hangup when booting Loongson 3A1000 with BOTH
CONFIG_PAGE_SIZE_64KB and CONFIG_MIPS_VA_BITS_48, that it turn
out to use 2-level pgtable instead of 3-level. 64KB page size
with 2-level pgtable only cover 42 bits VA, use 3-level pgtable
to cover all 48 bits VA(55 bits)

Fixes: 1e321fa917 ("MIPS64: Support of at least 48 bits of SEGBITS)
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25 16:52:11 +01:00
Huang Pei 7db5e9e9e5 MIPS: loongson64: fix FTLB configuration
It turns out that 'decode_configs' -> 'set_ftlb_enable' is called under
c->cputype unset, which leaves FTLB disabled on BOTH 3A2000 and 3A3000

Fix it by calling "decode_configs" after c->cputype is initialized

Fixes: da1bd29742 ("MIPS: Loongson64: Probe CPU features via CPUCFG")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25 16:46:31 +01:00
Tiezhu Yang 1cab5bd69e MIPS: Fix using smp_processor_id() in preemptible in show_cpuinfo()
There exists the following issue under DEBUG_PREEMPT:

 BUG: using smp_processor_id() in preemptible [00000000] code: systemd/1
 caller is show_cpuinfo+0x460/0xea0
 ...
 Call Trace:
 [<ffffffff8020f0dc>] show_stack+0x94/0x128
 [<ffffffff80e6cab4>] dump_stack_lvl+0x94/0xd8
 [<ffffffff80e74c5c>] check_preemption_disabled+0x104/0x110
 [<ffffffff802209c8>] show_cpuinfo+0x460/0xea0
 [<ffffffff80539d54>] seq_read_iter+0xfc/0x4f8
 [<ffffffff804fcc10>] new_sync_read+0x110/0x1b8
 [<ffffffff804ff57c>] vfs_read+0x1b4/0x1d0
 [<ffffffff804ffb18>] ksys_read+0xd0/0x110
 [<ffffffff8021c090>] syscall_common+0x34/0x58

We can see the following call trace:
 show_cpuinfo()
   cpu_has_fpu
     current_cpu_data
       smp_processor_id()

 $ addr2line -f -e vmlinux 0xffffffff802209c8
 show_cpuinfo
 arch/mips/kernel/proc.c:188

 $ head -188 arch/mips/kernel/proc.c | tail -1
	 if (cpu_has_fpu)

 arch/mips/include/asm/cpu-features.h
 #  define cpu_has_fpu		(current_cpu_data.options & MIPS_CPU_FPU)

 arch/mips/include/asm/cpu-info.h
 #define current_cpu_data cpu_data[smp_processor_id()]

Based on the above analysis, fix the issue by using raw_cpu_has_fpu
which calls raw_smp_processor_id() in show_cpuinfo().

Fixes: 626bfa0372 ("MIPS: kernel: proc: add CPU option reporting")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25 16:45:58 +01:00
Paul Cercueil fbf3bce458 MIPS: boot/compressed/: add __ashldi3 to target for ZSTD compression
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.

Fixes these build errors:

mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-25 10:13:41 +01:00
Linus Torvalds c46e8ece96 Selftest changes:
* Cleanups for the perf test infrastructure and mapping hugepages
 
 * Avoid contention on mmap_sem when the guests start to run
 
 * Add event channel upcall support to xen_shinfo_test
 
 x86 changes:
 
 * Fixes for Xen emulation
 
 * Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
 
 * Fixes for migration of 32-bit nested guests on 64-bit hypervisor
 
 * Compilation fixes
 
 * More SEV cleanups
 
 Generic:
 
 * Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
 and num_online_cpus().  Most architectures were only using one of the two.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGV/PAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMrogf/eAyilGRQL7lLETn3DTVlgLVv82+z
 giX11HlUhUmATHIDluj/wVQUjVcY6AO4SnvFaudX7B+mibndkw4L19IubP/koQZu
 xnKSJTn+mVANdzz3UdsHl0ujbPdQJaFCIPW6iewbn2GRRZMwA5F3vMK/H09XRApL
 I7kq8CPA6sC0I3TPzPN3ROxigexzYunZmGQ4qQe0GUdtxHrJOYQN++ddmWbQoEIC
 gdFTyF7CUQ+lmJe0b/Y88yhISFAJCEBuKFlg9tOTuxSfwvPX6lUu+pi+utEx9M+O
 ckTSQli/apZ4RVcSzxMIwX/BciYqhqOz5uMG+w4DRlJixtGSHtjiEVxGxw==
 =Iij4
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "Selftest changes:

   - Cleanups for the perf test infrastructure and mapping hugepages

   - Avoid contention on mmap_sem when the guests start to run

   - Add event channel upcall support to xen_shinfo_test

  x86 changes:

   - Fixes for Xen emulation

   - Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache

   - Fixes for migration of 32-bit nested guests on 64-bit hypervisor

   - Compilation fixes

   - More SEV cleanups

  Generic:

   - Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
     and num_online_cpus(). Most architectures were only using one of
     the two"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
  KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
  KVM: x86: Assume a 64-bit hypercall for guests with protected state
  selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
  riscv: kvm: fix non-kernel-doc comment block
  KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
  KVM: SEV: Drop a redundant setting of sev->asid during initialization
  KVM: SEV: WARN if SEV-ES is marked active but SEV is not
  KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
  KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
  KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
  KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
  KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
  KVM: x86/xen: Use sizeof_field() instead of open-coding it
  KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
  KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
  ...
2021-11-18 12:05:22 -08:00
Vitaly Kuznetsov 57a2e13ebd KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-18 02:12:14 -05:00
Matthew Wilcox (Oracle) 522a0032af Add linux/cacheflush.h
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.

Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().

More functions should have their default implementations moved in the
future, but those are for follow-on patches.  This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().

Fixes: 08b0b0059b ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-11-17 10:36:15 -05:00
Tiezhu Yang ebf7f6f0a6 bpf: Change value of MAX_TAIL_CALL_CNT from 32 to 33
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36 ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.

After commit 874be05f52 ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.

On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
 # echo 0 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf
 # dmesg | grep -w FAIL
 Tail call error path, max count reached jited:0 ret 34 != 33 FAIL

On some archs:
 # echo 1 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf
 # dmesg | grep -w FAIL
 Tail call error path, max count reached jited:1 ret 34 != 33 FAIL

Although the above failed testcase has been fixed in commit 18935a72eb
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.

The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.

Here are the test results on x86_64:

 # uname -m
 x86_64
 # echo 0 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf test_suite=test_tail_calls
 # dmesg | tail -1
 test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
 # rmmod test_bpf
 # echo 1 > /proc/sys/net/core/bpf_jit_enable
 # modprobe test_bpf test_suite=test_tail_calls
 # dmesg | tail -1
 test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
 # rmmod test_bpf
 # ./test_progs -t tailcalls
 #142 tailcalls:OK
 Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
2021-11-16 14:03:15 +01:00
Randy Dunlap fc1aabb088 mips: lantiq: add support for clk_get_parent()
Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.

Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!

Fixes: 171bb2f19e ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-16 09:27:40 +01:00
Randy Dunlap e8f67482e5 mips: bcm63xx: add support for clk_get_parent()
BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.

Fixes these build errors:

mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'

Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-16 09:27:28 +01:00
Colin Ian King 255e51da15 MIPS: generic/yamon-dt: fix uninitialized variable error
In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.

Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c💯7: error: Uninitialized variable: phys_memsize [uninitvar]

Fixes: f41d2430bb ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-16 09:27:01 +01:00
Wang Haojun b3ff2881ba MIPS: syscalls: Wire up futex_waitv syscall
Wire up the futex_waitv syscall.

Fix Build warning: #warning syscall futex_waitv not implemented [-Wcpp]

Signed-off-by: Wang Haojun <wanghaojun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-16 09:25:48 +01:00
Linus Torvalds 0d1503d8d8 Devicetree fixes for v5.16, take 1:
- 2 fixes due to DT node name changes on Arm, Ltd. boards
 
 - Treewide rename of Ingenic CGU headers
 
 - Update ST email addresses
 
 - Remove Netlogic DT bindings
 
 - Dropping few more cases of redundant 'maxItems' in schemas
 
 - Convert toshiba,tc358767 bridge binding to schema
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmGRN/wQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw0EXD/0byDq/gx0BOgSY18wOWp0W3tnJiudRrKNk
 8+TqfphpridGSzZryboBPQ3U06eOT1pMV9EBzHfqeb87nIneMxZ26KhgMPRFf7qt
 87G2tyfq4Itd59HATC/8xsq/5uiCONksbPojhjn6SrI4wLBzTegIYG5ZiocQw2tP
 vcW9wDAOfcRVfXBtQwmYD7nkeShaoTrv+EBcAFhg4XB43TWyezCCBqvAz0qDSl7q
 N/9xomgsB/fG1ImL/UWjPuPix64I9mrop7d8+C17980RJM10e5wL/eDWpbvWxqy6
 R7nTHT9HWnbcV5ywgBTh3W6iQw9EGyytD0Uzw3v+Meoga1/zCBkF48mEin61nY1c
 i44os73B9mwSZo34qysrFkir+NBNRBAwdP7z+GrarB9twlcIdfjfInQYWlNP73Yb
 zJ/XIVrfn6GsEZRdgXXK5VHL0ffDYzwoGEHSU6m0cTJI+iNQT4WQ89HkhMHG1q0d
 pRwKCE75mhMrwvniBYinL8I8LuMAJPZZKDpc6ZtBJdUdF6MFgXccJFdIBoho1TVL
 oHkaXWwUjkGXliTdWX7UJk4zS4zNAyB1jLT9uHMrLvX7uVM1Dsy9bYWaU4ABB0xr
 viT/gj/nawCbGbniytZEfAAe1bsnZOLqxmqe3XGUgYuOPQLB2xSSjkrr7HYmuLmx
 1AskvHxO0w==
 =ukBC
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

 - Two fixes due to DT node name changes on Arm, Ltd. boards

 - Treewide rename of Ingenic CGU headers

 - Update ST email addresses

 - Remove Netlogic DT bindings

 - Dropping few more cases of redundant 'maxItems' in schemas

 - Convert toshiba,tc358767 bridge binding to schema

* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: watchdog: sunxi: fix error in schema
  bindings: media: venus: Drop redundant maxItems for power-domain-names
  dt-bindings: Remove Netlogic bindings
  clk: versatile: clk-icst: Ensure clock names are unique
  of: Support using 'mask' in making device bus id
  dt-bindings: treewide: Update @st.com email address to @foss.st.com
  dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
  dt-bindings: media: Update maintainers for st,stm32-cec.yaml
  dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  dt-bindings: timer: Update maintainers for st,stm32-timer
  dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
  dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
  dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14 11:11:51 -08:00
Linus Torvalds 4218a96faf - Config updates for BMIPS platform
- Build fixes
 - Makefile cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmGORGgaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAUhA/7Bcld/5bmuu5foBglRaaT
 PDO+99v274ZD7Yprk8LRBT8Ix1zrF3fXaUBaV0CCN0vBAzTyNQ2cY0gbJBxUQlQ8
 wgWPijO5fg6sBuSaCGLqBg0N8yyGBEbQQJ9LR3kYYVzp5Q7YJ1E+R7J2eiCcc9mC
 geKAU9gzDN9g/vAEk0BVkKbhNAlEXxCk3rEUflvJdPW9f4lChkB8IW3lhnM5iMVy
 fx4qkl2MV9X3GIQyzcfJ+jrDeDloxStaHyP+fiNSFFW9g7R+UuncSXU4qvYVNH0C
 mRUkMj6kL7xeGDLo7dwVcEUrvAT2+e7QR6GezD7nGRvBZnuUO5R6SDzU6QljUHXf
 uH6raEhAz+ncmCRs8s32y9wYRAp1LDYFKsN1jLo8pHvhNJ8zSD3kAvC+BDfCILY2
 BD+gIRlwR/jWKSF1iJW/Cb2wCHOMz0WwZnESH4wFeGPcDjoZo0ZHtKj5OXE8u5pT
 UFROzxbYRCluhN8wHwQWUtGG+TVo5ZZc3mr5V3g84Mo6C/wp2uAy1+R9zV3BZiT8
 dmqwktmNr8iS+FAErppVmiWnDCRU6lxPdHiFF884xu6UO7cLPLMI1lJLyXXO9AkS
 PNpw96cOMX8cDHn3jabpRhKKtaDjjeMihC3OVxQz6fTqFwzNlLzdSz1uuu3Ho4BP
 4USpyQs6nL0OTxxT46CXUz0=
 =6xdH
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull more MIPS updates from Thomas Bogendoerfer:

 - Config updates for BMIPS platform

 - Build fixes

 - Makefile cleanups

* tag 'mips_5.16_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: decompressor: do not copy source files while building
  MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
  MIPS: fix duplicated slashes for Platform file path
  MIPS: fix *-pkg builds for loongson2ef platform
  PCI: brcmstb: Allow building for BMIPS_GENERIC
  MIPS: BMIPS: Enable PCI Kconfig
  MIPS: VDSO: remove -nostdlib compiler flag
  mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
  MIPS: Update bmips_stb_defconfig
  MIPS: Allow modules to set board_be_handler
2021-11-13 09:11:33 -08:00
Paul Cercueil c4a11bf423 dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Tidy up a bit the tree, by prefixing all include/dt-bindings/clock/ files
related to Ingenic SoCs with 'ingenic,'.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211016133322.40771-1-paul@crapouillou.net
2021-11-11 22:27:14 -06:00
Linus Torvalds 5147da902e Merge branch 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit cleanups from Eric Biederman:
 "While looking at some issues related to the exit path in the kernel I
  found several instances where the code is not using the existing
  abstractions properly.

  This set of changes introduces force_fatal_sig a way of sending a
  signal and not allowing it to be caught, and corrects the misuse of
  the existing abstractions that I found.

  A lot of the misuse of the existing abstractions are silly things such
  as doing something after calling a no return function, rolling BUG by
  hand, doing more work than necessary to terminate a kernel thread, or
  calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).

  In the review a deficiency in force_fatal_sig and force_sig_seccomp
  where ptrace or sigaction could prevent the delivery of the signal was
  found. I have added a change that adds SA_IMMUTABLE to change that
  makes it impossible to interrupt the delivery of those signals, and
  allows backporting to fix force_sig_seccomp

  And Arnd found an issue where a function passed to kthread_run had the
  wrong prototype, and after my cleanup was failing to build."

* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
  soc: ti: fix wkup_m3_rproc_boot_thread return type
  signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
  signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
  exit/r8188eu: Replace the macro thread_exit with a simple return 0
  exit/rtl8712: Replace the macro thread_exit with a simple return 0
  exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
  signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
  signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
  signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
  exit/syscall_user_dispatch: Send ordinary signals on failure
  signal: Implement force_fatal_sig
  exit/kthread: Have kernel threads return instead of calling do_exit
  signal/s390: Use force_sigsegv in default_trap_handler
  signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
  signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
  signal/sparc: In setup_tsb_params convert open coded BUG into BUG
  signal/powerpc: On swapcontext failure force SIGSEGV
  signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
  signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
  signal/sparc32: Remove unreachable do_exit in do_sparc_fault
  ...
2021-11-10 16:15:54 -08:00
Masahiro Yamada f78b25ee92 mips: decompressor: do not copy source files while building
As commit 7ae4a78daa ("ARM: 8969/1: decompressor: simplify libfdt
builds") stated, copying source files during the build time may not
end up with as clean code as expected.

Do similar for mips to clean up the Makefile and .gitignore.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-10 19:45:06 +01:00
Randy Dunlap e2f4b3be1d MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
For MIPS pre-boot, when CONFIG_KERNEL_ZSTD=y, the decompressor
function uses __bswapdi2(), so this object file should be added to
the target object file.

Fixes these build errors:

mips-linux-ld: arch/mips/boot/compressed/decompress.o: in function `xxh64':
decompress.c:(.text+0x8be0): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8c78): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8d04): undefined reference to `__bswapdi2'
mips-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0xa010): more undefined references to `__bswapdi2' follow

Fixes: 0652035a57 ("asm-generic: unaligned: remove byteshift helpers")
Fixes: cddc40f561 ("mips: always link byteswap helpers into decompressor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-10 19:38:55 +01:00
Masahiro Yamada cca2aac8ac MIPS: fix duplicated slashes for Platform file path
platform-y accumulates platform names with a slash appended.
The current $(patsubst ...) ends up with doubling slashes.

GNU Make still include Platform files, but in case of an error,
a clumsy file path is displayed:

  arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop.  Stop.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:11:52 +01:00
Masahiro Yamada 0706f74f71 MIPS: fix *-pkg builds for loongson2ef platform
Since commit 805b2e1d42 ("kbuild: include Makefile.compiler only when
compiler is needed"), package builds for the loongson2f platform fail.

  $ make ARCH=mips CROSS_COMPILE=mips64-linux- lemote2f_defconfig bindeb-pkg
    [ snip ]
  sh ./scripts/package/builddeb
  arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop.  Stop.
  cp: cannot stat '': No such file or directory
  make[5]: *** [scripts/Makefile.package:87: intdeb-pkg] Error 1
  make[4]: *** [Makefile:1558: intdeb-pkg] Error 2
  make[3]: *** [debian/rules:13: binary-arch] Error 2
  dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
  make[2]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
  make[1]: *** [Makefile:1558: bindeb-pkg] Error 2
  make: *** [Makefile:350: __build_one_by_one] Error 2

The reason is because "make image_name" fails.

  $ make ARCH=mips CROSS_COMPILE=mips64-linux- image_name
  arch/mips/loongson2ef//Platform:36: *** only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop.  Stop.

In general, adding $(error ...) in the parse stage is troublesome,
and it is pointless to check toolchains even if we are not building
anything. Do not include Kbuild.platform in such cases.

Fixes: 805b2e1d42 ("kbuild: include Makefile.compiler only when compiler is needed")
Reported-by: Jason Self <jason@bluehome.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:11:48 +01:00
Florian Fainelli 1d987052e3 MIPS: BMIPS: Enable PCI Kconfig
Enable HAVE_PCI and PCI_DRIVERS_GENERIC so we can build PCIE_BRCMSTB
which is the PCIe host bridge driver for this platform.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:10:29 +01:00
Masahiro Yamada bdbf2038fb MIPS: VDSO: remove -nostdlib compiler flag
The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used as a linker driver.

Since commit 2ff906994b ("MIPS: VDSO: Use $(LD) instead of $(CC) to
link VDSO"), $(LD) is directly used, hence -nostdlib is unneeded.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:09:37 +01:00
Randy Dunlap 5eeaafc8d6 mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:

   arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
           return x - PAGE_OFFSET + PHYS_OFFSET;
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)
   arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
           return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)

arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
           return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;

Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)

Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paulburton@kernel.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:09:04 +01:00
Florian Fainelli f1245bc8cb MIPS: Update bmips_stb_defconfig
Align the bmips_stb_defconfig with its downstream version at:
https://github.com/Broadcom/stblinux-4.1/blob/master/linux/arch/mips/configs/bmips_stb_defconfig
to be slightly more useful and include support for all of these options:

- latest Broadcom STB drivers
- support for high resolution timers
- cpufreq
- function tracers
- extending command line from DTB
- task lockup detector
- strong stack protector support
- IP auto-configuration

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:08:24 +01:00
Florian Fainelli 1f761b3e67 MIPS: Allow modules to set board_be_handler
After making the brcmstb_gisb driver modular with 707a4cdf86 ("bus:
brcmstb_gisb: Allow building as module") Guenter reported that mips
allmodconfig failed to link because board_be_handler was referenced.

Thomas indicated that if we were to continue making the brcmstb_gisb
driver modular for MIPS we would need to introduce a function that
allows setting the board_be_handler and export that function towards
modules.

This is what is being done here: board_be_handler is made static and is
now settable with a mips_set_be_handler() function which is exported.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fixes: 707a4cdf86 ("bus: brcmstb_gisb: Allow building as module")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-09 16:07:26 +01:00
Linus Torvalds 1e9ed9360f Kbuild updates for v5.16
- Remove the global -isystem compiler flag, which was made possible by
    the introduction of <linux/stdarg.h>
 
  - Improve the Kconfig help to print the location in the top menu level
 
  - Fix "FORCE prerequisite is missing" build warning for sparc
 
  - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
    a zstd-compressed tarball
 
  - Prevent gen_init_cpio tool from generating a corrupted cpio when
    KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
 
  - Misc cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmGGkysVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGgZkQAIX4i9Tt6pyl/2xGDGkzUqjprfoH
 QUIo1DoUclLUygoakrrrX3EnZLWrslgPTKjQxdiV6RA6xHfe4cYgNTSq8zM9lsPT
 lu+B4nEDqoXQ5gyLxMlnjS3FRQTNYIeBZEhSAIiW8TENdLKlKc+NYdoj7th50dO0
 SkXRa2dpWHa6t7ZRqHIHMpUWA7gm0w22ZbgQmyUv1CDGO4IHPLqe2b2PMsrzhSZ1
 yypP1l6aQVKuP0hN9aytbTRqDxUd0uOzBf00PK5zx23hjdwZ9wmZrFTKDf9fAu/+
 nR7gBsa5YoYNQh3UkayZXjR5dClmgsCXZ25OXI7YucQp/8OJ5fadfn1NFpJHsw56
 n5cckbHIXgnFUcel5YlkR6qTHjpzdr9vHm90MmiuX99b3oy9czl6pY3qkNfRkllQ
 v7ME5L1qlw3P3ia1KA+H4zW/LIJ8p5cbKBwaY22m3kY3bTx7PiOfMlep4UVqxXSb
 0/OqxSsmYg5LlmwEQ0SSsx45hE0o9nG/cdjkHu1jUOUHxYfpt1T4MTILeGUwmjzd
 TydJym5MZyXBawu4NVB3QLoKm5Jt2BXtyaWOtq74VSrs77roNCdYuQWJ+1aBf2Pg
 0s4CVC2cC7KlxJDImoqswZATGXPMfbiVDcuVSSukYRgBMeCBPUzRhB8YP36BZyD3
 9vFYmqSujtUU7nWb
 =ATFN
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Remove the global -isystem compiler flag, which was made possible by
   the introduction of <linux/stdarg.h>

 - Improve the Kconfig help to print the location in the top menu level

 - Fix "FORCE prerequisite is missing" build warning for sparc

 - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
   generate a zstd-compressed tarball

 - Prevent gen_init_cpio tool from generating a corrupted cpio when
   KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later

 - Misc cleanups

* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
  kbuild: use more subdir- for visiting subdirectories while cleaning
  sh: remove meaningless archclean line
  initramfs: Check timestamp to prevent broken cpio archive
  kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
  gen_init_cpio: add static const qualifiers
  kbuild: Add make tarzst-pkg build option
  scripts: update the comments of kallsyms support
  sparc: Add missing "FORCE" target when using if_changed
  kconfig: refactor conf_touch_dep()
  kconfig: refactor conf_write_dep()
  kconfig: refactor conf_write_autoconf()
  kconfig: add conf_get_autoheader_name()
  kconfig: move sym_escape_string_value() to confdata.c
  kconfig: refactor listnewconfig code
  kconfig: refactor conf_write_symbol()
  kconfig: refactor conf_write_heading()
  kconfig: remove 'const' from the return type of sym_escape_string_value()
  kconfig: rename a variable in the lexer to a clearer name
  kconfig: narrow the scope of variables in the lexer
  kconfig: Create links to main menu items in search
  ...
2021-11-08 09:15:45 -08:00
Linus Torvalds 0c5c62ddf8 pci-v5.16-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmGFXBkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vx6Tg/7BsGWm8f+uw/mr9lLm47q2mc4XyoO
 7bR9KDp5NM84W/8ZOU7dqqqsnY0ddrSOLBRyhJJYMW3SwJd1y1ajTBsL1Ujqv+eN
 z+JUFmhq4Laqm4k6Spc9CEJE+Ol5P6gGUtxLYo6PM2R0VxnSs/rDxctT5i7YOpCi
 COJ+NVT/mc/by2loz1kLTSR9GgtBBgd+Y8UA33GFbHKssROw02L0OI3wffp81Oba
 EhMGPoD+0FndAniDw+vaOSoO+YaBuTfbM92T/O00mND69Fj1PWgmNWZz7gAVgsXb
 3RrNENUFxgw6CDt7LZWB8OyT04iXe0R2kJs+PA9gigFCGbypwbd/Nbz5M7e9HUTR
 ray+1EpZib6+nIksQBL2mX8nmtyHMcLiM57TOEhq0+ECDO640MiRm8t0FIG/1E8v
 3ZYd9w20o/NxlFNXHxxpZ3D/osGH5ocyF5c5m1rfB4RGRwztZGL172LWCB0Ezz9r
 eHB8sWxylxuhrH+hp2BzQjyddg7rbF+RA4AVfcQSxUpyV01hoRocKqknoDATVeLH
 664nJIINFxKJFwfuL3E6OhrInNe1LnAhCZsHHqbS+NNQFgvPRznbixBeLkI9dMf5
 Yf6vpsWO7ur8lHHbRndZubVu8nxklXTU7B/w+C11sq6k9LLRJSHzanr3Fn9WA80x
 sznCxwUvbTCu1r0=
 =nsMh
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Conserve IRQs by setting up portdrv IRQs only when there are users
     (Jan Kiszka)
   - Rework and simplify _OSC negotiation for control of PCIe features
     (Joerg Roedel)
   - Remove struct pci_dev.driver pointer since it's redundant with the
     struct device.driver pointer (Uwe Kleine-König)

  Resource management:
   - Coalesce contiguous host bridge apertures from _CRS to accommodate
     BARs that cover more than one aperture (Kai-Heng Feng)

  Sysfs:
   - Check CAP_SYS_ADMIN before parsing user input (Krzysztof
     Wilczyński)
   - Return -EINVAL consistently from "store" functions (Krzysztof
     Wilczyński)
   - Use sysfs_emit() in endpoint "show" functions to avoid buffer
     overruns (Kunihiko Hayashi)

  PCIe native device hotplug:
   - Ignore Link Down/Up caused by resets during error recovery so
     endpoint drivers can remain bound to the device (Lukas Wunner)

  Virtualization:
   - Avoid bus resets on Atheros QCA6174, where they hang the device
     (Ingmar Klein)
   - Work around Pericom PI7C9X2G switch packet drop erratum by using
     store and forward mode instead of cut-through (Nathan Rossi)
   - Avoid trying to enable AtomicOps on VFs; the PF setting applies to
     all VFs (Selvin Xavier)

  MSI:
   - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
     interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
     Song)

  VPD:
   - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
     in the possible VPD space; use these to simplify the cxgb3 driver
     (Heiner Kallweit)

  Peer-to-peer DMA:
   - Add (not subtract) the bus offset when calculating DMA address
     (Wang Lu)

  ASPM:
   - Re-enable LTR at Downstream Ports so they don't report Unsupported
     Requests when reset or hot-added devices send LTR messages
     (Mingchuang Qiao)

  Apple PCIe controller driver:
   - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
     Zyngier)

  Cadence PCIe controller driver:
   - Return success when probe succeeds instead of falling into error
     path (Li Chen)

  HiSilicon Kirin PCIe controller driver:
   - Reorganize PHY logic and add support for external PHY drivers
     (Mauro Carvalho Chehab)
   - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
     Carvalho Chehab)
   - Add Kirin 970 support (Mauro Carvalho Chehab)
   - Make driver removable (Mauro Carvalho Chehab)

  Intel VMD host bridge driver:
   - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
     enabled (Adrian Huang)
   - Number each controller so we can tell them apart in
     /proc/interrupts (Chunguang Xu)
   - Avoid building on UML because VMD depends on x86 bare metal APIs
     (Johannes Berg)

  Marvell Aardvark PCIe controller driver:
   - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
   - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
   - Downgrade PIO Response Status messages to debug level (Marek Behún)
   - Preserve CRS SV (Config Request Retry Software Visibility) bit in
     emulated Root Control register (Pali Rohár)
   - Fix issue in configuring reference clock (Pali Rohár)
   - Don't clear status bits for masked interrupts (Pali Rohár)
   - Don't mask unused interrupts (Pali Rohár)
   - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
   - Retry config accesses on CRS response (Pali Rohár)
   - Simplify emulated Root Capabilities initialization (Pali Rohár)
   - Fix several link training issues (Pali Rohár)
   - Fix link-up checking via LTSSM (Pali Rohár)
   - Fix reporting of Data Link Layer Link Active (Pali Rohár)
   - Fix emulation of W1C bits (Marek Behún)
   - Fix MSI domain .alloc() method to return zero on success (Marek
     Behún)
   - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
     (Marek Behún)
   - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
     at startup; PCI core will set those as necessary (Pali Rohár)
   - When operating as a Root Port, set class code to "PCI Bridge"
     instead of the default "Mass Storage Controller" (Pali Rohár)
   - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
     implement this per spec (Pali Rohár)
   - Add emulation of option ROM BAR since aardvark doesn't implement
     this per spec (Pali Rohár)

  MediaTek MT7621 PCIe controller driver:
   - Add MediaTek MT7621 PCIe host controller driver and DT binding
     (Sergio Paracuellos)

  Qualcomm PCIe controller driver:
   - Add SC8180x compatible string (Bjorn Andersson)
   - Add endpoint controller driver and DT binding (Manivannan
     Sadhasivam)
   - Restructure to use of_device_get_match_data() (Prasad Malisetty)
   - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)

  Renesas R-Car PCIe controller driver:
   - Remove unnecessary includes (Geert Uytterhoeven)

  Rockchip DesignWare PCIe controller driver:
   - Add DT binding (Simon Xue)

  Socionext UniPhier Pro5 controller driver:
   - Serialize INTx masking/unmasking (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Run dwc .host_init() method before registering MSI interrupt
     handler so we can deal with pending interrupts left by bootloader
     (Bjorn Andersson)
   - Clean up Kconfig dependencies (Andy Shevchenko)
   - Export symbols to allow more modular drivers (Luca Ceresoli)

  TI DRA7xx PCIe controller driver:
   - Allow host and endpoint drivers to be modules (Luca Ceresoli)
   - Enable external clock if present (Luca Ceresoli)

  TI J721E PCIe driver:
   - Disable PHY when probe fails after initializing it (Christophe
     JAILLET)

  MicroSemi Switchtec management driver:
   - Return error to application when command execution fails because an
     out-of-band reset has cleared the device BARs, Memory Space Enable,
     etc (Kelvin Cao)
   - Fix MRPC error status handling issue (Kelvin Cao)
   - Mask out other bits when reading of management VEP instance ID
     (Kelvin Cao)
   - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
     (Kelvin Cao)
   - Add check of event support (Logan Gunthorpe)

  Miscellaneous:
   - Remove unused pci_pool wrappers, which have been replaced by
     dma_pool (Cai Huoqing)
   - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
     Wilczyński)
   - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
     Wilczyński)
   - Fix some sscanf(), sprintf() format mismatches (Krzysztof
     Wilczyński)
   - Update PCI subsystem information in MAINTAINERS (Krzysztof
     Wilczyński)
   - Correct some misspellings (Krzysztof Wilczyński)"

* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
  PCI: Add ACS quirk for Pericom PI7C9X2G switches
  PCI: apple: Configure RID to SID mapper on device addition
  iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
  PCI: apple: Implement MSI support
  PCI: apple: Add INTx and per-port interrupt support
  PCI: kirin: Allow removing the driver
  PCI: kirin: De-init the dwc driver
  PCI: kirin: Disable clkreq during poweroff sequence
  PCI: kirin: Move the power-off code to a common routine
  PCI: kirin: Add power_off support for Kirin 960 PHY
  PCI: kirin: Allow building it as a module
  PCI: kirin: Add MODULE_* macros
  PCI: kirin: Add Kirin 970 compatible
  PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
  PCI: apple: Set up reference clocks when probing
  PCI: apple: Add initial hardware bring-up
  PCI: of: Allow matching of an interrupt-map local to a PCI device
  of/irq: Allow matching of an interrupt-map local to an interrupt controller
  irqdomain: Make of_phandle_args_to_fwspec() generally available
  PCI: Do not enable AtomicOps on VFs
  ...
2021-11-06 14:36:12 -07:00
Linus Torvalds 512b7931ad Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
 "257 patches.

  Subsystems affected by this patch series: scripts, ocfs2, vfs, and
  mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
  gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
  pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
  memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
  vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
  cleanups, kfence, and damon)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
  mm/damon: remove return value from before_terminate callback
  mm/damon: fix a few spelling mistakes in comments and a pr_debug message
  mm/damon: simplify stop mechanism
  Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
  Docs/admin-guide/mm/damon/start: simplify the content
  Docs/admin-guide/mm/damon/start: fix a wrong link
  Docs/admin-guide/mm/damon/start: fix wrong example commands
  mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
  mm/damon: remove unnecessary variable initialization
  Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
  mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
  selftests/damon: support watermarks
  mm/damon/dbgfs: support watermarks
  mm/damon/schemes: activate schemes based on a watermarks mechanism
  tools/selftests/damon: update for regions prioritization of schemes
  mm/damon/dbgfs: support prioritization weights
  mm/damon/vaddr,paddr: support pageout prioritization
  mm/damon/schemes: prioritize regions within the quotas
  mm/damon/selftests: support schemes quotas
  mm/damon/dbgfs: support quotas of schemes
  ...
2021-11-06 14:08:17 -07:00
David Hildenbrand 952eea9b01 memblock: allow to specify flags with memblock_add_node()
We want to specify flags when hotplugging memory.  Let's prepare to pass
flags to memblock_add_node() by adjusting all existing users.

Note that when hotplugging memory the system is already up and running
and we might have concurrent memblock users: for example, while we're
hotplugging memory, kexec_file code might search for suitable memory
regions to place kexec images.  It's important to add the memory
directly to memblock via a single call with the right flags, instead of
adding the memory first and apply flags later: otherwise, concurrent
memblock users might temporarily stumble over memblocks with wrong
flags, which will be important in a follow-up patch that introduces a
new flag to properly handle add_memory_driver_managed().

Link: https://lkml.kernel.org/r/20211004093605.5830-4-david@redhat.com
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shahab Vahedi <shahab@synopsys.com>	[arch/arc]
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jianyong Wu <Jianyong.Wu@arm.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:42 -07:00
Mike Rapoport 4421cca0a3 memblock: use memblock_free for freeing virtual pointers
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()

The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.

    @@
    identifier vaddr;
    expression size;
    @@
    (
    - memblock_phys_free(__pa(vaddr), size);
    + memblock_free(vaddr, size);
    |
    - memblock_free_ptr(vaddr, size);
    + memblock_free(vaddr, size);
    )

[sfr@canb.auug.org.au: fixup]
  Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au

Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Mike Rapoport 3ecc68349b memblock: rename memblock_free to memblock_phys_free
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Mike Rapoport fa27717110 memblock: drop memblock_free_early_nid() and memblock_free_early()
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().

Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().

Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-06 13:30:41 -07:00
Linus Torvalds a3f3677380 - added printing of CPU options for /proc/cpuinfo
- removed support for Netlogic SOCs
 - fixes and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmGE6OEaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHA3zQ//Ze+qwFP53nl21DTx+viH
 1wvoy+rMa95Udrzf8/Mp8qskZG9Jq2UKskYeWPq2cgMD2X7JSh8b0Xz3O9K8XxKD
 a21jGoY61np7HHl9XOhYD7A87DvrHS2VrYh6IiN9tqV5tK0x7uzYnH0pJDqhU4im
 0zDtnnvVDvUPU9EDEusD8xPaKHquQXEd0JyNXLo+hvuwc1RZ2VckjE8dsS3I0kn2
 2Sz4j7K/e1hB85vE1LXuuU8cL8IuMpDxkDnK6STA7mzNBPAdqnClnKuB70zjnwp0
 lCjZBWmSeVIqCEdoerB7wgn1g+8k/1TBbCoqtN2poQMiLBUKFbfv5gXg3Uei0SDa
 Q/c3od8Mr2jn39EbG5/cf0FOyuKtLDFvGXASaSuW7Xhvn3ue4I6MrKh2bb5nimXP
 3ShvsvYfoc2cGSz7Pt7tOCP6WHFlIi+9wjZEr8XZlGhJE6BgE4CbJHA3/Q4VAl+Q
 4whAcNldSX+sVS/dSHPo0s/9eLCPm1EWulD8mBpvj27cmeUVhqXCIY34Df7aIDBi
 F1+rFxt6/uDTDEJp3PkwkmVJuyzivN5CcXl4xks/MaJ/8BgYZVRbafyGlJxm+MMf
 ufAXvfiwZhyVg4cHajtMiFO2m1itmoyg3CvIffiVZMbegqy4Dsu+ZIf0csPmGheK
 88AfVKBfrRwrJG1yK2iX/Dw=
 =mvn0
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added printing of CPU options for /proc/cpuinfo

 - removed support for Netlogic SOCs

 - fixes and cleanup

* tag 'mips_5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Cobalt: Explain GT64111 early PCI fixup
  mips: fix HUGETLB function without THP enabled
  mips: cm: Convert to bitfield API to fix out-of-bounds access
  MIPS: Remove NETLOGIC support
  MIPS: kernel: proc: add CPU option reporting
  MIPS: kernel: proc: use seq_puts instead of seq_printf
  MIPS: kernel: proc: fix trivial style errors
  MIPS: Fix assembly error from MIPSr2 code used within MIPS_ISA_ARCH_LEVEL
  MIPS: octeon: Remove unused functions
  MIPS: Loongson64: Add of_node_put() before break
  bcm47xx: Replace printk(KERN_ALERT ... pci_devname(dev)) with pci_alert()
  bcm47xx: Get rid of redundant 'else'
  MIPS: sni: Fix the build
  MIPS: Avoid macro redefinitions
  MIPS: loongson64: Fix no screen display during boot-up
  MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
2021-11-05 08:13:19 -07:00
Linus Torvalds 5cd4dc44b8 Staging driver update for 5.16-rc1
Here is the big set of staging driver updates and cleanups for 5.16-rc1.
 
 Overall we ended up removing a lot of code this time, a bit over 20,000
 lines are now gone thanks to a lot of cleanup work by many developers.
 
 Nothing huge in here functionality wise, just loads of cleanups:
 	- r8188eu driver major cleanups and removal of unused and dead
 	  code
 	- wlan-ng minor cleanups
 	- fbtft driver cleanups
 	- most driver cleanups
 	- rtl8* drivers cleanups
 	- rts5208 driver cleanups
 	- vt6655 driver cleanups
 	- vc04_services drivers cleanups
 	- wfx cleanups on the way to almost getting this merged out of
 	  staging (it's close!)
 	- tiny mips changes needed for the mt7621 drivers, they have
 	  been acked by the respective subsystem maintainers to go
 	  through this tree.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPZQQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yml9wCeJl83anYno0xh+UP6CsEkbe64VJEAoIEKyry/
 tlUowcatxGfz3aYA1wTc
 =FyAK
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates and cleanups for
  5.16-rc1.

  Overall we ended up removing a lot of code this time, a bit over
  20,000 lines are now gone thanks to a lot of cleanup work by many
  developers.

  Nothing huge in here functionality wise, just loads of cleanups:

   - r8188eu driver major cleanups and removal of unused and dead code

   - wlan-ng minor cleanups

   - fbtft driver cleanups

   - most driver cleanups

   - rtl8* drivers cleanups

   - rts5208 driver cleanups

   - vt6655 driver cleanups

   - vc04_services drivers cleanups

   - wfx cleanups on the way to almost getting this merged out of
     staging (it's close!)

   - tiny mips changes needed for the mt7621 drivers, they have been
     acked by the respective subsystem maintainers to go through this
     tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits)
  staging: r8188eu: hal: remove goto statement and local variable
  staging: rtl8723bs: hal remove the assignment to itself
  staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4
  staging: vchiq_core: get rid of typedef
  staging: fieldbus: anybus: reframe comment to avoid warning
  staging: r8188eu: fix missing unlock in rtw_resume()
  staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame
  staging: r8188eu: core: remove goto statement
  staging: vt6655: Rename `dwAL7230InitTable` array
  staging: vt6655: Rename `dwAL2230PowerTable` array
  staging: vt6655: Rename `dwAL7230InitTableAMode` array
  staging: vt6655: Rename `dwAL7230ChannelTable2` array
  staging: vt6655: Rename `dwAL7230ChannelTable1` array
  staging: vt6655: Rename `dwAL7230ChannelTable0` array
  staging: vt6655: Rename `dwAL2230ChannelTable1` array
  staging: vt6655: Rename `dwAL2230ChannelTable0` array
  staging: r8712u: fix control-message timeout
  staging: rtl8192u: fix control-message timeouts
  staging: mt7621-dts: add missing SPDX license to files
  staging: vchiq_core: fix quoted strings split across lines
  ...
2021-11-04 07:56:22 -07:00
Pali Rohár 36de23a4c5 MIPS: Cobalt: Explain GT64111 early PCI fixup
Properly document why changing PCI Class Code for GT64111 device to Host
Bridge is required as important details were after 20 years forgotten.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-03 17:34:11 +01:00
Linus Torvalds d7e0a795bf ARM:
* More progress on the protected VM front, now with the full
   fixed feature set as well as the limitation of some hypercalls
   after initialisation.
 
 * Cleanup of the RAZ/WI sysreg handling, which was pointlessly
   complicated
 
 * Fixes for the vgic placement in the IPA space, together with a
   bunch of selftests
 
 * More memcg accounting of the memory allocated on behalf of a guest
 
 * Timer and vgic selftests
 
 * Workarounds for the Apple M1 broken vgic implementation
 
 * KConfig cleanups
 
 * New kvmarm.mode=none option, for those who really dislike us
 
 RISC-V:
 * New KVM port.
 
 x86:
 * New API to control TSC offset from userspace
 
 * TSC scaling for nested hypervisors on SVM
 
 * Switch masterclock protection from raw_spin_lock to seqcount
 
 * Clean up function prototypes in the page fault code and avoid
 repeated memslot lookups
 
 * Convey the exit reason to userspace on emulation failure
 
 * Configure time between NX page recovery iterations
 
 * Expose Predictive Store Forwarding Disable CPUID leaf
 
 * Allocate page tracking data structures lazily (if the i915
 KVM-GT functionality is not compiled in)
 
 * Cleanups, fixes and optimizations for the shadow MMU code
 
 s390:
 * SIGP Fixes
 
 * initial preparations for lazy destroy of secure VMs
 
 * storage key improvements/fixes
 
 * Log the guest CPNC
 
 Starting from this release, KVM-PPC patches will come from
 Michael Ellerman's PPC tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBOiEUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNowwf/axlx3g9sgCwQHr12/6UF/7hL/RwP
 9z+pGiUzjl2YQE+RjSvLqyd6zXh+h4dOdOKbZDLSkSTbcral/8U70ojKnQsXM0XM
 1LoymxBTJqkgQBLm9LjYreEbzrPV4irk4ygEmuk3CPOHZu8xX1ei6c5LdandtM/n
 XVUkXsQY+STkmnGv4P3GcPoDththCr0tBTWrFWtxa0w9hYOxx0ay1AZFlgM4FFX0
 QFuRc8VBLoDJpIUjbkhsIRIbrlHc/YDGjuYnAU7lV/CIME8vf2BW6uBwIZJdYcDj
 0ejozLjodEnuKXQGnc8sXFioLX2gbMyQJEvwCgRvUu/EU7ncFm1lfs7THQ==
 =UxKM
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:

   - More progress on the protected VM front, now with the full fixed
     feature set as well as the limitation of some hypercalls after
     initialisation.

   - Cleanup of the RAZ/WI sysreg handling, which was pointlessly
     complicated

   - Fixes for the vgic placement in the IPA space, together with a
     bunch of selftests

   - More memcg accounting of the memory allocated on behalf of a guest

   - Timer and vgic selftests

   - Workarounds for the Apple M1 broken vgic implementation

   - KConfig cleanups

   - New kvmarm.mode=none option, for those who really dislike us

  RISC-V:

   - New KVM port.

  x86:

   - New API to control TSC offset from userspace

   - TSC scaling for nested hypervisors on SVM

   - Switch masterclock protection from raw_spin_lock to seqcount

   - Clean up function prototypes in the page fault code and avoid
     repeated memslot lookups

   - Convey the exit reason to userspace on emulation failure

   - Configure time between NX page recovery iterations

   - Expose Predictive Store Forwarding Disable CPUID leaf

   - Allocate page tracking data structures lazily (if the i915 KVM-GT
     functionality is not compiled in)

   - Cleanups, fixes and optimizations for the shadow MMU code

  s390:

   - SIGP Fixes

   - initial preparations for lazy destroy of secure VMs

   - storage key improvements/fixes

   - Log the guest CPNC

  Starting from this release, KVM-PPC patches will come from Michael
  Ellerman's PPC tree"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
  RISC-V: KVM: fix boolreturn.cocci warnings
  RISC-V: KVM: remove unneeded semicolon
  RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functions
  RISC-V: KVM: Factor-out FP virtualization into separate sources
  KVM: s390: add debug statement for diag 318 CPNC data
  KVM: s390: pv: properly handle page flags for protected guests
  KVM: s390: Fix handle_sske page fault handling
  KVM: x86: SGX must obey the KVM_INTERNAL_ERROR_EMULATION protocol
  KVM: x86: On emulation failure, convey the exit reason, etc. to userspace
  KVM: x86: Get exit_reason as part of kvm_x86_ops.get_exit_info
  KVM: x86: Clarify the kvm_run.emulation_failure structure layout
  KVM: s390: Add a routine for setting userspace CPU state
  KVM: s390: Simplify SIGP Set Arch handling
  KVM: s390: pv: avoid stalls when making pages secure
  KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
  KVM: s390: pv: avoid double free of sida page
  KVM: s390: pv: add macros for UVC CC values
  s390/mm: optimize reset_guest_reference_bit()
  s390/mm: optimize set_guest_storage_key()
  s390/mm: no need for pte_alloc_map_lock() if we know the pmd is present
  ...
2021-11-02 11:24:14 -07:00
Linus Torvalds fc02cb2b37 Core:
- Remove socket skb caches
 
  - Add a SO_RESERVE_MEM socket op to forward allocate buffer space
    and avoid memory accounting overhead on each message sent
 
  - Introduce managed neighbor entries - added by control plane and
    resolved by the kernel for use in acceleration paths (BPF / XDP
    right now, HW offload users will benefit as well)
 
  - Make neighbor eviction on link down controllable by userspace
    to work around WiFi networks with bad roaming implementations
 
  - vrf: Rework interaction with netfilter/conntrack
 
  - fq_codel: implement L4S style ce_threshold_ect1 marking
 
  - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
 
 BPF:
 
  - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
    as implemented in LLVM14
 
  - Introduce bpf_get_branch_snapshot() to capture Last Branch Records
 
  - Implement variadic trace_printk helper
 
  - Add a new Bloomfilter map type
 
  - Track <8-byte scalar spill and refill
 
  - Access hw timestamp through BPF's __sk_buff
 
  - Disallow unprivileged BPF by default
 
  - Document BPF licensing
 
 Netfilter:
 
  - Introduce egress hook for looking at raw outgoing packets
 
  - Allow matching on and modifying inner headers / payload data
 
  - Add NFT_META_IFTYPE to match on the interface type either from
    ingress or egress
 
 Protocols:
 
  - Multi-Path TCP:
    - increase default max additional subflows to 2
    - rework forward memory allocation
    - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
 
  - MCTP flow support allowing lower layer drivers to configure msg
    muxing as needed
 
  - Automatic Multicast Tunneling (AMT) driver based on RFC7450
 
  - HSR support the redbox supervision frames (IEC-62439-3:2018)
 
  - Support for the ip6ip6 encapsulation of IOAM
 
  - Netlink interface for CAN-FD's Transmitter Delay Compensation
 
  - Support SMC-Rv2 eliminating the current same-subnet restriction,
    by exploiting the UDP encapsulation feature of RoCE adapters
 
  - TLS: add SM4 GCM/CCM crypto support
 
  - Bluetooth: initial support for link quality and audio/codec
    offload
 
 Driver APIs:
 
  - Add a batched interface for RX buffer allocation in AF_XDP
    buffer pool
 
  - ethtool: Add ability to control transceiver modules' power mode
 
  - phy: Introduce supported interfaces bitmap to express MAC
    capabilities and simplify PHY code
 
  - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
 
 New drivers:
 
  - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
 
  - Ethernet driver for ASIX AX88796C SPI device (x88796c)
 
 Drivers:
 
  - Broadcom PHYs
    - support 72165, 7712 16nm PHYs
    - support IDDQ-SR for additional power savings
 
  - PHY support for QCA8081, QCA9561 PHYs
 
  - NXP DPAA2: support for IRQ coalescing
 
  - NXP Ethernet (enetc): support for software TCP segmentation
 
  - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
    Gigabit-capable IP found on RZ/G2L SoC
 
  - Intel 100G Ethernet
    - support for eswitch offload of TC/OvS flow API, including
      offload of GRE, VxLAN, Geneve tunneling
    - support application device queues - ability to assign Rx and Tx
      queues to application threads
    - PTP and PPS (pulse-per-second) extensions
 
  - Broadcom Ethernet (bnxt)
    - devlink health reporting and device reload extensions
 
  - Mellanox Ethernet (mlx5)
    - offload macvlan interfaces
    - support HW offload of TC rules involving OVS internal ports
    - support HW-GRO and header/data split
    - support application device queues
 
  - Marvell OcteonTx2:
    - add XDP support for PF
    - add PTP support for VF
 
  - Qualcomm Ethernet switch (qca8k): support for QCA8328
 
  - Realtek Ethernet DSA switch (rtl8366rb)
    - support bridge offload
    - support STP, fast aging, disabling address learning
    - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
 
  - Mellanox Ethernet/IB switch (mlxsw)
    - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
    - offload root TBF qdisc as port shaper
    - support multiple routing interface MAC address prefixes
    - support for IP-in-IP with IPv6 underlay
 
  - MediaTek WiFi (mt76)
    - mt7921 - ASPM, 6GHz, SDIO and testmode support
    - mt7915 - LED and TWT support
 
  - Qualcomm WiFi (ath11k)
    - include channel rx and tx time in survey dump statistics
    - support for 80P80 and 160 MHz bandwidths
    - support channel 2 in 6 GHz band
    - spectral scan support for QCN9074
    - support for rx decapsulation offload (data frames in 802.3
      format)
 
  - Qualcomm phone SoC WiFi (wcn36xx)
    - enable Idle Mode Power Save (IMPS) to reduce power consumption
      during idle
 
  - Bluetooth driver support for MediaTek MT7922 and MT7921
 
  - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
    and Realtek 8822C/8852A
 
  - Microsoft vNIC driver (mana)
    - support hibernation and kexec
 
  - Google vNIC driver (gve)
    - support for jumbo frames
    - implement Rx page reuse
 
 Refactor:
 
  - Make all writes to netdev->dev_addr go thru helpers, so that we
    can add this address to the address rbtree and handle the updates
 
  - Various TCP cleanups and optimizations including improvements
    to CPU cache use
 
  - Simplify the gnet_stats, Qdisc stats' handling and remove
    qdisc->running sequence counter
 
  - Driver changes and API updates to address devlink locking
    deficiencies
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmGAzX4ACgkQMUZtbf5S
 IrvW3g//Q0ZLrOuHK9pZ8sCXMMhDj8qL6ajm0otMddHWA/+1UglwVBKFhsajfxOf
 wJ/5LZis+XKLpLqKTU5chKVfn39HuDGe/D3l+egi01Gv5BW0+XzEhagfyR5tJX5z
 wsGG5CXO/we/laVSzRiFtwwVEKHKN20YC+tIQwYOYP5Wy3q4G7qDsFhT7GqgsGCS
 n74QUEAIB5Tz0ODWFqLtbsySzIurXrskibwt5T9bvAAlPw/lCU68mmG+NVJ7VddO
 lBbNkLMOo8yW9Ci20H09SrYd4jZTmMARo9tsFO1tAvAMk7qpn0Wd8pnOYTjFFoMD
 +qjiFSVMh7E0JGb8Y7NCvwaB99suAK5rfGP68Xwe62DfP7vYWEx4pZGxBP19F4ld
 6Kn1ME33BX9rUF9tBecf0bdKfJUwB2Q2Xou/b9laG04bwiqsc9iG5FQq1C46lnLZ
 QdzNiS1My4dJMczkWt66HF3Kx30ibwHfvKMIHjf4PqkzEatkv6Y6SBZ57KXL+Lde
 0BQSFhbf0tm2Gf55etzrczLElI3uqHSFWUNZZ2Bt6WmzO1e6tpV9nAtRWF4C/dFg
 QDpLJtOOOY65uq+qz09zoPfv2lem868SrCAuFrVn99bEpYjx/CGNFDeEI02l6jyr
 84eUxd364UcbIk3fc+eTGdXHLQNVk30G0AHVBBxaWNIidwfqXeE=
 =srde
 -----END PGP SIGNATURE-----

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...
2021-11-02 06:20:58 -07:00
Zhaolong Zhang f69fa4c81b mips: fix HUGETLB function without THP enabled
ltp test futex_wake04 without THP enabled leads to below bt:
  [<ffffffff80a03728>] BUG+0x0/0x8
  [<ffffffff80a0624c>] internal_get_user_pages_fast+0x81c/0x820
  [<ffffffff8093ac18>] get_futex_key+0xa0/0x480
  [<ffffffff8093b074>] futex_wait_setup+0x7c/0x1a8
  [<ffffffff8093b2c0>] futex_wait+0x120/0x228
  [<ffffffff8093dbe8>] do_futex+0x140/0xbd8
  [<ffffffff8093e78c>] sys_futex+0x10c/0x1c0
  [<ffffffff808703d0>] syscall_common+0x34/0x58

Move pmd_write() and pmd_page() from TRANSPARENT_HUGEPAGE scope to
MIPS_HUGE_TLB_SUPPORT scope, because both THP and HUGETLB will need
them.

Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-02 11:15:09 +01:00
Geert Uytterhoeven 18b8f5b6fc mips: cm: Convert to bitfield API to fix out-of-bounds access
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts.  This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits.  Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.

Fix this by using FIELD_GET() instead.  Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.

Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-11-02 10:53:52 +01:00
Linus Torvalds 79ef0c0014 Tracing updates for 5.16:
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
   dump happens from a kretprobe callback.
 
 - Fix to bootconfig parsing
 
 - Have tracefs allow owner and group permissions by default (only denying
   others). There's been pressure to allow non root to tracefs in a
   controlled fashion, and using groups is probably the safest.
 
 - Bootconfig memory managament updates.
 
 - Bootconfig clean up to have the tools directory be less dependent on
   changes in the kernel tree.
 
 - Allow perf to be traced by function tracer.
 
 - Rewrite of function graph tracer to be a callback from the function tracer
   instead of having its own trampoline (this change will happen on an arch
   by arch basis, and currently only x86_64 implements it).
 
 - Allow multiple direct trampolines (bpf hooks to functions) be batched
   together in one synchronization.
 
 - Allow histogram triggers to add variables that can perform calculations
   against the event's fields.
 
 - Use the linker to determine architecture callbacks from the ftrace
   trampoline to allow for proper parameter prototypes and prevent warnings
   from the compiler.
 
 - Extend histogram triggers to key off of variables.
 
 - Have trace recursion use bit magic to determine preempt context over if
   branches.
 
 - Have trace recursion disable preemption as all use cases do anyway.
 
 - Added testing for verification of tracing utilities.
 
 - Various small clean ups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
 Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
 =Loz8
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - kprobes: Restructured stack unwinder to show properly on x86 when a
   stack dump happens from a kretprobe callback.

 - Fix to bootconfig parsing

 - Have tracefs allow owner and group permissions by default (only
   denying others). There's been pressure to allow non root to tracefs
   in a controlled fashion, and using groups is probably the safest.

 - Bootconfig memory managament updates.

 - Bootconfig clean up to have the tools directory be less dependent on
   changes in the kernel tree.

 - Allow perf to be traced by function tracer.

 - Rewrite of function graph tracer to be a callback from the function
   tracer instead of having its own trampoline (this change will happen
   on an arch by arch basis, and currently only x86_64 implements it).

 - Allow multiple direct trampolines (bpf hooks to functions) be batched
   together in one synchronization.

 - Allow histogram triggers to add variables that can perform
   calculations against the event's fields.

 - Use the linker to determine architecture callbacks from the ftrace
   trampoline to allow for proper parameter prototypes and prevent
   warnings from the compiler.

 - Extend histogram triggers to key off of variables.

 - Have trace recursion use bit magic to determine preempt context over
   if branches.

 - Have trace recursion disable preemption as all use cases do anyway.

 - Added testing for verification of tracing utilities.

 - Various small clean ups and fixes.

* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
  tracing/histogram: Fix semicolon.cocci warnings
  tracing/histogram: Fix documentation inline emphasis warning
  tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
  tracing: Show size of requested perf buffer
  bootconfig: Initialize ret in xbc_parse_tree()
  ftrace: do CPU checking after preemption disabled
  ftrace: disable preemption when recursion locked
  tracing/histogram: Document expression arithmetic and constants
  tracing/histogram: Optimize division by a power of 2
  tracing/histogram: Covert expr to const if both operands are constants
  tracing/histogram: Simplify handling of .sym-offset in expressions
  tracing: Fix operator precedence for hist triggers expression
  tracing: Add division and multiplication support for hist triggers
  tracing: Add support for creating hist trigger variables from literal
  selftests/ftrace: Stop tracing while reading the trace file by default
  MAINTAINERS: Update KPROBES and TRACING entries
  test_kprobes: Move it from kernel/ to lib/
  docs, kprobes: Remove invalid URL and add new reference
  samples/kretprobes: Fix return value if register_kretprobe() failed
  lib/bootconfig: Fix the xbc_get_info kerneldoc
  ...
2021-11-01 20:05:19 -07:00
Jakub Kicinski b7b98f8689 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-11-01

We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).

The main changes are:

1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.

2) Parallelize bpf test_progs, from Yucong and Andrii.

3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.

4) Improve bpf selftests on s390, from Ilya.

5) bloomfilter bpf map type, from Joanne.

6) Big improvements to JIT tests especially on Mips, from Johan.

7) Support kernel module function calls from bpf, from Kumar.

8) Support typeless and weak ksym in light skeleton, from Kumar.

9) Disallow unprivileged bpf by default, from Pawan.

10) BTF_KIND_DECL_TAG support, from Yonghong.

11) Various bpftool cleanups, from Quentin.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  bpf: Factor out helpers for ctx access checking
  bpf: Factor out a helper to prepare trampoline for struct_ops prog
  selftests, bpf: Fix broken riscv build
  riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
  tools, build: Add RISC-V to HOSTARCH parsing
  riscv, bpf: Increase the maximum number of iterations
  selftests, bpf: Add one test for sockmap with strparser
  selftests, bpf: Fix test_txmsg_ingress_parser error
  ...
====================

Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01 19:59:46 -07:00
Linus Torvalds 2019295c9e spi: Updates for v5.16
This is quite a quiet release for SPI, there's been a bit of cleanup to
 the core from Uwe but nothing functionality wise.  We have added several
 new drivers, Cadence XSPI, Ingenic JZ47xx, Qualcomm SC7280 and SC7180
 and Xilinx Versal OSPI.
 
 There's a trivial conflict in the Tegra driver that's been causing
 issues.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmGABLQACgkQJNaLcl1U
 h9Bz2gf9FdjnFXXUQSDgz5tXbrcROCHAYyY9aI9xLFPXaup2ZacKFB5iQcCFaLAR
 saOoiezNru+Y5MyyEhMcbRhyNeVNwTVven7r2SG6S3ldt3q6RaiDiBr5rUCaTNTj
 AaatHLrpCfj4d/0Rgzh366BjbAthZQ9+f/c51pEfkoHyY8Kd0XJmi0pCuHnV8reT
 vzJsGFctcc6Zkzp3M2bg0wG9T+OEJjeMMd/OeYHUFrfhvEsUm0ljRCy1/WRTQ0Fq
 qlJO/m6YLo4a3D4bl/CH7WwsWrZ/rWEaL2/esyKH799E7MXOOY9D9YdRVU6m+hZS
 pR1RjqqsXszIMkkviqbPtCA0tF7+4g==
 =N0Jw
 -----END PGP SIGNATURE-----

Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "This is quite a quiet release for SPI, there's been a bit of cleanup
  to the core from Uwe but nothing functionality wise.

  We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
  Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"

* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
  spi: Convert NXP flexspi to json schema
  spi: spi-geni-qcom: Add support for GPI dma
  spi: fsi: Fix contention in the FSI2SPI engine
  spi: spi-rpc-if: Check return value of rpcif_sw_init()
  spi: tegra210-quad: Put device into suspend on driver removal
  spi: tegra20-slink: Put device into suspend on driver removal
  spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
  spi: at91-usart: replacing legacy gpio interface for gpiod
  spi: replace snprintf in show functions with sysfs_emit
  spi: cadence: Add of_node_put() before return
  spi: orion: Add of_node_put() before goto
  spi: cadence-quadspi: fix dma_unmap_single() call
  spi: tegra20: fix build with CONFIG_PM_SLEEP=n
  spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
  spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
  spi: Make several public functions private to spi.c
  spi: Reorder functions to simplify the next commit
  spi: Remove unused function spi_busnum_to_master()
  spi: Move comment about chipselect check to the right place
  spi: fsi: Print status on error
  ...
2021-11-01 19:09:04 -07:00