In preparation of introducing KPP implementations of Curve25519, import
the set of test cases proposed by the Zinc patch set, but converted to
the KPP format.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors for blake2b with various digest sizes. As the algorithm is
the same up to the digest calculation, the key and input data length is
distributed in a way that tests all combinanions of the two over the
digest sizes.
Based on the suggestion from Eric, the following input sizes are tested
[0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the
padded and the non-padded input buffers are tested.
blake2b-160 blake2b-256 blake2b-384 blake2b-512
---------------------------------------------------
len=0 | klen=0 klen=1 klen=32 klen=64
len=1 | klen=32 klen=64 klen=0 klen=1
len=7 | klen=64 klen=0 klen=1 klen=32
len=15 | klen=1 klen=32 klen=64 klen=0
len=64 | klen=0 klen=1 klen=32 klen=64
len=247 | klen=32 klen=64 klen=0 klen=1
len=256 | klen=64 klen=0 klen=1 klen=32
Where key:
- klen=0: empty key
- klen=1: 1 byte value 0x42, 'B'
- klen=32: first 32 bytes of the default key, sequence 00..1f
- klen=64: default key, sequence 00..3f
The unkeyed vectors are ordered before keyed, as this is required by
testmgr.
CC: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the rfc3686(ctr(sm4)) skcipher algorithm
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the ofb(sm4) and cfb(sm4) skcipher algorithms
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the hmac(sm3) ahash authentication algorithm
changes since v1 & v2:
-nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a test vector for the ESSIV mode that is the most widely used,
i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes
(the latter is used by tcrypt to encapsulate the authenc template
or h/w instantiations of the same)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Three variants of AEGIS were proposed for the CAESAR competition, and
only one was selected for the final portfolio: AEGIS128.
The other variants, AEGIS128L and AEGIS256, are not likely to ever turn
up in networking protocols or other places where interoperability
between Linux and other systems is a concern, nor are they likely to
be subjected to further cryptanalysis. However, uninformed users may
think that AEGIS128L (which is faster) is equally fit for use.
So let's remove them now, before anyone starts using them and we are
forced to support them forever.
Note that there are no known flaws in the algorithms or in any of these
implementations, but they have simply outlived their usefulness.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MORUS was not selected as a winner in the CAESAR competition, which
is not surprising since it is considered to be cryptographically
broken [0]. (Note that this is not an implementation defect, but a
flaw in the underlying algorithm). Since it is unlikely to be in use
currently, let's remove it before we're stuck with it.
[0] https://eprint.iacr.org/2019/172.pdf
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto test failures in FIPS mode cause an immediate panic, but
on some system the cryptographic boundary extends beyond just
the Linux controlled domain.
Add a simple atomic notification chain to allow interested parties
to register to receive notification prior to us kicking the bucket.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
The largest stack object in this file is now the shash descriptor.
Since there are many other stack variables, this can push it
over the 1024 byte warning limit, in particular with clang and
KASAN:
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
Make test_hash_vs_generic_impl() do the same thing as the
corresponding eaed and skcipher functions by allocating the
descriptor dynamically. We can still do better than this,
but it brings us well below the 1024 byte limit.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On arm32, we get warnings about high stack usage in some of the functions:
crypto/testmgr.c:2269:12: error: stack frame size of 1032 bytes in function 'alg_test_aead' [-Werror,-Wframe-larger-than=]
static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
^
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
static int __alg_test_hash(const struct hash_testvec *vecs,
^
On of the larger objects on the stack here is struct testvec_config, so
change that to dynamic allocation.
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Fixes: d435e10e67 ("crypto: testmgr - fuzz skciphers against their generic implementation")
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are no remaining users of the cipher implementation, and there
are no meaningful ways in which the arc4 cipher can be combined with
templates other than ECB (and the way we do provide that combination
is highly dubious to begin with).
So let's drop the arc4 cipher altogether, and only keep the ecb(arc4)
skcipher, which is used in various places in the kernel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call cond_resched() after each fuzz test iteration. This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.
While we're at it, also call cond_resched() after finishing testing each
test vector.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xxhash is currently implemented as a self-contained module in /lib.
This patch enables that module to be used as part of the generic kernel
crypto framework. It adds a simple wrapper to the 64bit version.
I've also added test vectors (with help from Nick Terrell). The upstream
xxhash code is tested by running hashing operation on random 222 byte
data with seed values of 0 and a prime number. The upstream test
suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664
Essentially hashing is run on data of length 0,1,14,222 with the
aforementioned seed values 0 and prime 2654435761. The particular random
222 byte string was provided to me by Nick Terrell by reading
/dev/random and the checksums were calculated by the upstream xxsum
utility with the following bash script:
dd if=/dev/random of=TEST_VECTOR bs=1 count=222
for a in 0 1; do
for l in 0 1 14 222; do
for s in 0 2654435761; do
echo algo $a length $l seed $s;
head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s
done
done
done
This produces output as follows:
algo 0 length 0 seed 0
02cc5d05 stdin
algo 0 length 0 seed 2654435761
02cc5d05 stdin
algo 0 length 1 seed 0
25201171 stdin
algo 0 length 1 seed 2654435761
25201171 stdin
algo 0 length 14 seed 0
c1d95975 stdin
algo 0 length 14 seed 2654435761
c1d95975 stdin
algo 0 length 222 seed 0
b38662a6 stdin
algo 0 length 222 seed 2654435761
b38662a6 stdin
algo 1 length 0 seed 0
ef46db3751d8e999 stdin
algo 1 length 0 seed 2654435761
ac75fda2929b17ef stdin
algo 1 length 1 seed 0
27c3f04c2881203a stdin
algo 1 length 1 seed 2654435761
4a15ed26415dfe4d stdin
algo 1 length 14 seed 0
3d33dc700231dfad stdin
algo 1 length 14 seed 2654435761
ea5f7ddef9a64f80 stdin
algo 1 length 222 seed 0
5f3d3c08ec2bef34 stdin
algo 1 length 222 seed 2654435761
6a9df59664c7ed62 stdin
algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently
not hooked up.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For hash algorithms implemented using the "shash" algorithm type, test
both the ahash and shash APIs, not just the ahash API.
Testing the ahash API already tests the shash API indirectly, which is
normally good enough. However, there have been corner cases where there
have been shash bugs that don't get exposed through the ahash API. So,
update testmgr to test the shash API too.
This would have detected the arm64 SHA-1 and SHA-2 bugs for which fixes
were just sent out (https://patchwork.kernel.org/patch/10964843/ and
https://patchwork.kernel.org/patch/10965089/):
alg: shash: sha1-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha224-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha256-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
This also would have detected the bugs fixed by commit 307508d107
("crypto: crct10dif-generic - fix use via crypto_shash_digest()") and
commit dec3d0b107
("crypto: x86/crct10dif-pcl - fix use via crypto_shash_digest()").
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark sm4 and missing aes using protected keys which are indetical to
same algs with no HW protected keys as tested.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the extra crypto self-tests are enabled, test each AEAD algorithm
against its generic implementation when one is available. This
involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test. Both good and bad
inputs are tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the extra crypto self-tests are enabled, test each skcipher
algorithm against its generic implementation when one is available.
This involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test. Both good and bad
inputs are tested.
This has already detected a bug in the skcipher_walk API, a bug in the
LRW template, and an inconsistency in the cts implementations.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the extra crypto self-tests are enabled, test each hash algorithm
against its generic implementation when one is available. This
involves: checking the algorithm properties for consistency, then
randomly generating test vectors using the generic implementation and
running them against the implementation under test. Both good and bad
inputs are tested.
This has already detected a bug in the x86 implementation of poly1305,
bugs in crct10dif, and an inconsistency in cbcmac.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some helper functions in preparation for fuzz testing algorithms
against their generic implementation.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for fuzz testing algorithms against their generic
implementation, make error messages in testmgr identify test vectors by
name rather than index. Built-in test vectors are simply "named" by
their index in testmgr.h, as before. But (in later patches) generated
test vectors will be given more descriptive names to help developers
debug problems detected with them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update testmgr to support testing for specific errors from setkey() and
digest() for hashes; setkey() and encrypt()/decrypt() for skciphers and
ciphers; and setkey(), setauthsize(), and encrypt()/decrypt() for AEADs.
This is useful because algorithms usually restrict the lengths or format
of the message, key, and/or authentication tag in some way. And bad
inputs should be tested too, not just good inputs.
As part of this change, remove the ambiguously-named 'fail' flag and
replace it with 'setkey_error = -EINVAL' for the only test vector that
used it -- the DES weak key test vector. Note that this tightens the
test to require -EINVAL rather than any error code, but AFAICS this
won't cause any test failure.
Other than that, these new fields aren't set on any test vectors yet.
Later patches will do so.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr test vectors for EC-RDSA algorithm for every of five
supported parameters (curves). Because there are no officially published
test vectors for the curves, the vectors are generated by gost-engine.
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some public key algorithms (like EC-DSA) keep in parameters field
important data such as digest and curve OIDs (possibly more for
different EC-DSA variants). Thus, just setting a public key (as
for RSA) is not enough.
Append parameters into the key stream for akcipher_set_{pub,priv}_key.
Appended data is: (u32) algo OID, (u32) parameters length, parameters
data.
This does not affect current akcipher API nor RSA ciphers (they could
ignore it). Idea of appending parameters to the key stream is by Herbert
Xu.
Cc: David Howells <dhowells@redhat.com>
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previous akcipher .verify() just `decrypts' (using RSA encrypt which is
using public key) signature to uncover message hash, which was then
compared in upper level public_key_verify_signature() with the expected
hash value, which itself was never passed into verify().
This approach was incompatible with EC-DSA family of algorithms,
because, to verify a signature EC-DSA algorithm also needs a hash value
as input; then it's used (together with a signature divided into halves
`r||s') to produce a witness value, which is then compared with `r' to
determine if the signature is correct. Thus, for EC-DSA, nor
requirements of .verify() itself, nor its output expectations in
public_key_verify_signature() wasn't sufficient.
Make improved .verify() call which gets hash value as input and produce
complete signature check without any output besides status.
Now for the top level verification only crypto_akcipher_verify() needs
to be called and its return value inspected.
Make sure that `digest' is in kmalloc'd memory (in place of `output`) in
{public,tpm}_key_verify_signature() as insisted by Herbert Xu, and will
be changed in the following commit.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a module parameter cryptomgr.panic_on_fail which causes the kernel
to panic if any crypto self-tests fail.
Use cases:
- More easily detect crypto self-test failures by boot testing,
e.g. on KernelCI.
- Get a bug report if syzkaller manages to use the template system to
instantiate an algorithm that fails its self-tests.
The command-line option "fips=1" already does this, but it also makes
other changes not wanted for general testing, such as disabling
"unapproved" algorithms. panic_on_fail just does what it says.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All crypto API algorithms are supposed to support the case where they
are called in a context where SIMD instructions are unusable, e.g. IRQ
context on some architectures. However, this isn't tested for by the
self-tests, causing bugs to go undetected.
Now that all algorithms have been converted to use crypto_simd_usable(),
update the self-tests to test the no-SIMD case. First, a bool
testvec_config::nosimd is added. When set, the crypto operation is
executed with preemption disabled and with crypto_simd_usable() mocked
out to return false on the current CPU.
A bool test_sg_division::nosimd is also added. For hash algorithms it's
honored by the corresponding ->update(). By setting just a subset of
these bools, the case where some ->update()s are done in SIMD context
and some are done in no-SIMD context is also tested.
These bools are then randomly set by generate_random_testvec_config().
For now, all no-SIMD testing is limited to the extra crypto self-tests,
because it might be a bit too invasive for the regular self-tests.
But this could be changed later.
This has already found bugs in the arm64 AES-GCM and ChaCha algorithms.
This would have found some past bugs as well.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
So that the no-SIMD fallback code can be tested by the crypto
self-tests, add a macro crypto_simd_usable() which wraps may_use_simd(),
but also returns false if the crypto self-tests have set a per-CPU bool
to disable SIMD in crypto code on the current CPU.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all AEAD algorithms (that I have the hardware to test, at
least) have been fixed to not modify the user-provided aead_request,
remove the workaround from testmgr that reset aead_request::tfm after
each AEAD encryption/decryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow skcipher test vectors to declare the value the IV buffer should be
updated to at the end of the encryption or decryption operation.
(This check actually used to be supported in testmgr, but it was never
used and therefore got removed except for the AES-Keywrap special case.
But it will be used by CBC and CTR now, so re-add it.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check that algorithms do not change the aead_request structure, as users
may rely on submitting the request again (e.g. after copying new data
into the same source buffer) without reinitializing everything.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Check that algorithms do not change the skcipher_request structure, as
users may rely on submitting the request again (e.g. after copying new
data into the same source buffer) without reinitializing everything.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_hash() to use the new test framework, adding a list of
testvec_configs to test by default. When the extra self-tests are
enabled, randomly generated testvec_configs are tested as well.
This improves hash test coverage mainly because now all algorithms have
a variety of data layouts tested, whereas before each algorithm was
responsible for declaring its own chunked test cases which were often
missing or provided poor test coverage. The new code also tests both
the MAY_SLEEP and !MAY_SLEEP cases and buffers that cross pages.
This already found bugs in the hash walk code and in the arm32 and arm64
implementations of crct10dif.
I removed the hash chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_aead() to use the new test framework, using the same
list of testvec_configs that skcipher testing uses.
This significantly improves AEAD test coverage mainly because previously
there was only very limited test coverage of the possible data layouts.
Now the data layouts to test are listed in one place for all algorithms
and optionally are also randomly generated. In fact, only one AEAD
algorithm (AES-GCM) even had a chunked test case before.
This already found bugs in all the AEGIS and MORUS implementations, the
x86 AES-GCM implementation, and the arm64 AES-CCM implementation.
I removed the AEAD chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Note: the rewritten test code allocates an aead_request just once per
algorithm rather than once per encryption/decryption, but some AEAD
algorithms incorrectly change the tfm pointer in the request. It's
nontrivial to fix these, so to move forward I'm temporarily working
around it by resetting the tfm pointer. But they'll need to be fixed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert alg_test_skcipher() to use the new test framework, adding a list
of testvec_configs to test by default. When the extra self-tests are
enabled, randomly generated testvec_configs are tested as well.
This improves skcipher test coverage mainly because now all algorithms
have a variety of data layouts tested, whereas before each algorithm was
responsible for declaring its own chunked test cases which were often
missing or provided poor test coverage. The new code also tests both
the MAY_SLEEP and !MAY_SLEEP cases, different IV alignments, and buffers
that cross pages.
This has already found a bug in the arm64 ctr-aes-neonbs algorithm.
It would have easily found many past bugs.
I removed the skcipher chunked test vectors that were the same as
non-chunked ones, but left the ones that were unique.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add functions that generate a random testvec_config, in preparation for
using it for randomized fuzz tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To achieve more comprehensive crypto test coverage, I'd like to add fuzz
tests that use random data layouts and request flags.
To be most effective these tests should be part of testmgr, so they
automatically run on every algorithm registered with the crypto API.
However, they will take much longer to run than the current tests and
therefore will only really be intended to be run by developers, whereas
the current tests have a wider audience.
Therefore, add a new kconfig option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS
that can be set by developers to enable these extra, expensive tests.
Similar to the regular tests, also add a module parameter
cryptomgr.noextratests to support disabling the tests.
Finally, another module parameter cryptomgr.fuzz_iterations is added to
control how many iterations the fuzz tests do. Note: for now setting
this to 0 will be equivalent to cryptomgr.noextratests=1. But I opted
for separate parameters to provide more flexibility to add other types
of tests under the "extra tests" category in the future.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto algorithms must produce the same output for the same input
regardless of data layout, i.e. how the src and dst scatterlists are
divided into chunks and how each chunk is aligned. Request flags such
as CRYPTO_TFM_REQ_MAY_SLEEP must not affect the result either.
However, testing of this currently has many gaps. For example,
individual algorithms are responsible for providing their own chunked
test vectors. But many don't bother to do this or test only one or two
cases, providing poor test coverage. Also, other things such as
misaligned IVs and CRYPTO_TFM_REQ_MAY_SLEEP are never tested at all.
Test code is also duplicated between the chunked and non-chunked cases,
making it difficult to make other improvements.
To improve the situation, this patch series basically moves the chunk
descriptions into the testmgr itself so that they are shared by all
algorithms. However, it's done in an extensible way via a new struct
'testvec_config', which describes not just the scaled chunk lengths but
also all other aspects of the crypto operation besides the data itself
such as the buffer alignments, the request flags, whether the operation
is in-place or not, the IV alignment, and for hash algorithms when to
do each update() and when to use finup() vs. final() vs. digest().
Then, this patch series makes skcipher, aead, and hash algorithms be
tested against a list of default testvec_configs, replacing the current
test code. This improves overall test coverage, without reducing test
performance too much. Note that the test vectors themselves are not
changed, except for removing the chunk lists.
This series also adds randomized fuzz tests, enabled by a new kconfig
option intended for developer use only, where skcipher, aead, and hash
algorithms are tested against many randomly generated testvec_configs.
This provides much more comprehensive test coverage.
These improved tests have already exposed many bugs.
To start it off, this initial patch adds the testvec_config and various
helper functions that will be used by the skcipher, aead, and hash test
code that will be converted to use the new testvec_config framework.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRC32 is not a cryptographic hash algorithm,
so the FIPS restrictions should not apply to it.
(The CRC32C variant is already allowed.)
This CRC32 variant is used for in dm-crypt legacy TrueCrypt
IV implementation (tcw); detected by cryptsetup test suite
failure in FIPS mode.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instantiating "cryptd(crc32c)" causes a crypto self-test failure because
the crypto_alloc_shash() in alg_test_crc32c() fails. This is because
cryptd(crc32c) is an ahash algorithm, not a shash algorithm; so it can
only be accessed through the ahash API, unlike shash algorithms which
can be accessed through both the ahash and shash APIs.
As the test is testing the shash descriptor format which is only
applicable to shash algorithms, skip it for ahash algorithms.
(Note that it's still important to fix crypto self-test failures even
for weird algorithm instantiations like cryptd(crc32c) that no one
would really use; in fips_enabled mode unprivileged users can use them
to panic the kernel, and also they prevent treating a crypto self-test
failure as a bug when fuzzing the kernel.)
Fixes: 8e3ee85e68 ("crypto: crc32c - Test descriptor context format")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it
sounds like it is requesting a weak key. Actually, it is requesting
that weak keys be forbidden (for algorithms that have the notion of
"weak keys"; currently only DES and XTS do).
Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which
it can be easily confused. (This in fact happened in the UX500 driver,
though just in some debugging messages.)
Therefore, make the intent clear by renaming it to
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently testmgr has separate encryption and decryption test vectors
for AEADs. That's massively redundant, since usually the decryption
tests are identical to the encryption tests, just with the input/result
swapped. And for some algorithms it was forgotten to add decryption
test vectors, so for them currently only encryption is being tested.
Therefore, eliminate the redundancy by removing the AEAD decryption test
vectors and updating testmgr to test both AEAD encryption and decryption
using what used to be the encryption test vectors. Naming is adjusted
accordingly: each aead_testvec now has a 'ptext' (plaintext), 'plen'
(plaintext length), 'ctext' (ciphertext), and 'clen' (ciphertext length)
instead of an 'input', 'ilen', 'result', and 'rlen'. "Ciphertext" here
refers to the full ciphertext, including the authentication tag.
For now the scatterlist divisions are just given for the plaintext
length, not also the ciphertext length. For decryption, the last
scatterlist element is just extended by the authentication tag length.
In total, this removes over 5000 lines from testmgr.h, with no reduction
in test coverage since prior patches already copied the few unique
decryption test vectors into the encryption test vectors.
The testmgr.h portion of this patch was automatically generated using
the following awk script, except that I also manually updated the
definition of 'struct aead_testvec' and fixed the location of the
comment describing the AEGIS-128 test vectors.
BEGIN { OTHER = 0; ENCVEC = 1; DECVEC = 2; DECVEC_TAIL = 3; mode = OTHER }
/^static const struct aead_testvec.*_enc_/ { sub("_enc", ""); mode = ENCVEC }
/^static const struct aead_testvec.*_dec_/ { mode = DECVEC }
mode == ENCVEC {
sub(/\.input[[:space:]]*=/, ".ptext\t=")
sub(/\.result[[:space:]]*=/, ".ctext\t=")
sub(/\.ilen[[:space:]]*=/, ".plen\t=")
sub(/\.rlen[[:space:]]*=/, ".clen\t=")
print
}
mode == DECVEC_TAIL && /[^[:space:]]/ { mode = OTHER }
mode == OTHER { print }
mode == ENCVEC && /^};/ { mode = OTHER }
mode == DECVEC && /^};/ { mode = DECVEC_TAIL }
Note that git's default diff algorithm gets confused by the testmgr.h
portion of this patch, and reports too many lines added and removed.
It's better viewed with 'git diff --minimal' (or 'git show --minimal'),
which reports "2 files changed, 1235 insertions(+), 6491 deletions(-)".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for unifying the AEAD encryption and decryption test
vectors, skip AEAD test vectors with the 'novrfy' (verification failure
expected) flag set when testing encryption rather than decryption.
These test vectors only make sense for decryption.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crc32c context is in CPU endianness, whereas the final digest is
little endian. alg_test_crc32c() got this mixed up. Fix it.
The test passes both before and after, but this patch fixes the
following sparse warning:
crypto/testmgr.c:1912:24: warning: cast to restricted __le32
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel
David Sterba
Pascal van Leeuwen
Ard Biesheuvel
Hannah Pan
Gilad Ben-Yossef
Linus Torvalds
Arnd Bergmann
Eric Biggers
Nikolay Borisov
Thomas Gleixner
Vitaly Chikunov
Christopher Diaz Riveros
Milan Broz