[ Upstream commit c39ba4de6b ]
BUG_ON can be triggered from userspace with an element with a large
userdata area. Replace it by length check and return EINVAL instead.
Over time extensions have been growing in size.
Pick a sufficiently old Fixes: tag to propagate this fix.
Fixes: 7d7402642e ("netfilter: nf_tables: variable sized set element keys / data")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a847c00ee ]
NFPROTO_ARP is expecting to find the ARP header at the network offset.
In the particular case of ARP, HTYPE= field shows the initial bytes of
the ethernet header destination MAC address.
netdev out: IN= OUT=bridge0 MACSRC=c2:76:e5:71:e1:de MACDST=36:b0:4a:e2:72:ea MACPROTO=0806 ARP HTYPE=14000 PTYPE=0x4ae2 OPCODE=49782
NFPROTO_NETDEV egress hook is also expecting to find the IP headers at
the network offset.
Fixes: 35b9395104 ("netfilter: add generic ARP packet logger")
Reported-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bd582ae9a ]
Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.
Fixes: 2961f69f15 ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a544e415 ]
The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.
Fixes: c8b404fb05 ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 884b66976a ]
The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.
Fixes: 45857ae954 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73318c4b7d ]
While reading sysctl_fib_sync_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race.
Fixes: 9ab948a91b ("ipv4: Allow amount of dirty memory from fib resizing to be controllable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48d7ee321e ]
While reading icmp sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd44f04b92 ]
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 310731e2f1 ]
While reading .sysctl_mem, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d32edf1f3 ]
While reading inetpeer sysctl variables, they can be changed
concurrently. So, we need to add READ_ONCE() to avoid data-races.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47e6ab24e8 ]
While reading sysctl_tcp_max_orphans, it can be changed concurrently.
So, we need to add READ_ONCE() to avoid a data-race.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e877820877 ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_jiffies() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_jiffies() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31bcc8fb8 ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_doulongvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_doulongvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3b559df3 ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_douintvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 61d9b56a89 ("sysctl: add unsigned int range support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f613d86d01 ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec_minmax() to use READ_ONCE() and
WRITE_ONCE() internally to fix data-races on the sysctl side. For now,
proc_dointvec_minmax() itself is tolerant to a data-race, but we still
need to add annotations on the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4762b532ec ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_douintvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side. For now, proc_douintvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.
Fixes: e7d316a02f ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f1be04b4d ]
A sysctl variable is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
This patch changes proc_dointvec() to use READ_ONCE() and WRITE_ONCE()
internally to fix data-races on the sysctl side. For now, proc_dointvec()
itself is tolerant to a data-race, but we still need to add annotations on
the other subsystem's side.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0680e20af5 ]
Renaming interfaces using udevd depends on the interface being registered
before its netdev is registered. Otherwise, udevd reads an empty
phys_port_name value, resulting in the interface not being renamed.
Fix this by registering the interface before registering its netdev
by invoking am65_cpsw_nuss_register_devlink() before invoking
register_netdev() for the interface.
Move the function call to devlink_port_type_eth_set(), invoking it after
register_netdev() is invoked, to ensure that netlink notification for the
port state change is generated after the netdev is completely initialized.
Fixes: 58356eb31d ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20220706070208.12207-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 029c1c2059 ]
There is a long-standing issue with the Synopsys DWC Ethernet driver
for Tegra194 where random system crashes have been observed [0]. The
problem occurs when the split header feature is enabled in the stmmac
driver. In the bad case, a larger than expected buffer length is
received and causes the calculation of the total buffer length to
overflow. This results in a very large buffer length that causes the
kernel to crash. Why this larger buffer length is received is not clear,
however, the feedback from the NVIDIA design team is that the split
header feature is not supported for Tegra194. Therefore, disable split
header support for Tegra194 to prevent these random crashes from
occurring.
[0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/
Fixes: 67afd6d1cf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc976f5629 ]
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 219af251bd ]
The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c4f29ec87 ]
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e99e5697e ]
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1a10f1b48 ]
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!
Also add support for explicit polarity inversion.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd10bb89b0 ]
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f314520 ("ASoC: tas2770: Insert post reset delay").
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 040e3360af ]
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2ee2cfc4a ]
When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be
negative, which may cause the integer overflow problem.
Fixes: 39b0709636 ("ima: Implement support for module-style appended signatures")
Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85144df9ff ]
If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.
Fixes: 091a4f9194 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.com
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed611e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b759bf2f9 ]
TX doorbells may be postponed, because sometimes the driver knows that
another packet follows (for example, when xmit_more is true, or when a
MPWQE session is closed before transmitting a packet).
However, the DMA mapping may fail for the next packet, in which case a
new WQE is not posted, the doorbell isn't updated either, and the
transmission of the previous packet will be delayed indefinitely.
This commit fixes the described rare error flow by posting a NOP and
ringing the doorbell on errors to flush all the previous packets. The
MPWQE session is closed before that. DMA mapping in the MPWQE flow is
moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions
are not allowed. Stop room always has enough space for a NOP, because
the actual TX WQE is not posted.
Fixes: e586b3b0ba ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 452133dd58 ]
The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.
Fixes: 0cfafd4b4d ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c9d876545 ]
There is a total of four 4M entries flow tables. In sriov disabled
mode, ct, ct_nat and post_act take three of them. When adding the
first tc nic rule in this mode, it will take another 4M table
for the tc <chain,prio> table. If user then enables sriov, the legacy
flow table tries to take another 4M and fails, and so enablement fails.
To fix that, have legacy fdb take the next available maximum
size from the fs ft pool.
Fixes: 4a98544d18 ("net/mlx5: Move chains ft pool to be used by all firmware steering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cc2714e85 ]
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.
Fixes: df8d866770 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 598f0a99fa ]
commit 7a1be318f5 ("ARM: 9012/1: move device tree mapping out of linear
region") use FDT_FIXED_BASE to map the whole FDT_FIXED_SIZE memory area
which contains fdt. But it only reserves the exact physical memory that
fdt occupied. Unfortunately, this mapping is non-shareable. An illegal or
speculative read access can bring the RAM content from non-fdt zone into
cache, PIPT makes it to be hit by subsequently read access through
shareable mapping(such as linear mapping), and the cache consistency
between cores is lost due to non-shareable property.
|<---------FDT_FIXED_SIZE------>|
| |
-------------------------------
| <non-fdt> | <fdt> | <non-fdt> |
-------------------------------
1. CoreA read <non-fdt> through MT_ROM mapping, the old data is loaded
into the cache.
2. CoreB write <non-fdt> to update data through linear mapping. CoreA
received the notification to invalid the corresponding cachelines, but
the property non-shareable makes it to be ignored.
3. CoreA read <non-fdt> through linear mapping, cache hit, the old data
is read.
To eliminate this risk, add a new memory type MT_MEMORY_RO. Compared to
MT_ROM, it is shareable and non-executable.
Here's an example:
list_del corruption. prev->next should be c0ecbf74, but was c08410dc
kernel BUG at lib/list_debug.c:53!
... ...
PC is at __list_del_entry_valid+0x58/0x98
LR is at __list_del_entry_valid+0x58/0x98
psr: 60000093
sp : c0ecbf30 ip : 00000000 fp : 00000001
r10: c08410d0 r9 : 00000001 r8 : c0825e0c
r7 : 20000013 r6 : c08410d0 r5 : c0ecbf74 r4 : c0ecbf74
r3 : c0825d08 r2 : 00000000 r1 : df7ce6f4 r0 : 00000044
... ...
Stack: (0xc0ecbf30 to 0xc0ecc000)
bf20: c0ecbf74 c0164fd0 c0ecbf70 c0165170
bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
... ... < next prev >
(__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
(__list_del_entry) from (finish_swait+0x60/0x7c)
(finish_swait) from (rcu_gp_kthread+0x560/0xa20)
(rcu_gp_kthread) from (kthread+0x14c/0x15c)
(kthread) from (ret_from_fork+0x14/0x24)
The faulty list node to be deleted is a local variable, its address is
c0ecbf74. The dumped stack shows that 'prev' = c0ecbf74, but its value
before lib/list_debug.c:53 is c08410dc. A large amount of printing results
in swapping out the cacheline containing the old data(MT_ROM mapping is
read only, so the cacheline cannot be dirty), and the subsequent dump
operation obtains new data from the DDR.
Fixes: 7a1be318f5 ("ARM: 9012/1: move device tree mapping out of linear region")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0609e20024 ]
Jon reports that the Spectre-BHB init code is filling up the kernel log
with spurious notifications about which mitigation has been enabled,
every time any CPU comes out of a low power state.
Given that Spectre-BHB mitigations are system wide, only a single
mitigation can be enabled, and we already print an error if two types of
CPUs coexist in a single system that require different Spectre-BHB
mitigations.
This means that the pr_info() that describes the selected mitigation
does not need to be emitted for each CPU anyway, and so we can simply
emit it only once.
In order to clarify the above in the log message, update it to describe
that the selected mitigation will be enabled on all CPUs, including ones
that are unaffected. If another CPU comes up later that is affected and
requires a different mitigation, we report an error as before.
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ece49c569 ]
Enabling the SPI CS35L41 audio codec driver for Steam Deck [1]
revealed a problem with the current AMD SPI controller driver
implementation, consisting of an unrecoverable system hang.
The issue can be prevented if we ensure the max transfer size
and the max message size do not exceed the FIFO buffer size.
According to the implementation of the downstream driver, the
AMD SPI controller is not able to handle more than 70 bytes per
transfer, which corresponds to the size of the FIFO buffer.
Hence, let's fix this by setting the SPI limits mentioned above.
[1] https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com
Reported-by: Anastasios Vacharakis <vacharakis@o2mail.de>
Fixes: bbb336f39e ("spi: spi-amd: Add AMD SPI controller driver support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220706100626.1234731-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a57f68ddc8 ]
Most likely due to copy-paste mistake the device managed version of the
denoted reset control getter has been implemented with invalid semantic,
which can be immediately spotted by having "WARN_ON(shared && acquired)"
warning in the system log as soon as the method is called. Anyway let's
fix it by altering the boolean arguments passed to the
__devm_reset_control_bulk_get() method from
- shared = true, optional = false, acquired = true
to
+ shared = false, optional = true, acquired = true
That's what they were supposed to be in the first place (see the non-devm
version of the same method: reset_control_bulk_get_optional_exclusive()).
Fixes: 48d7139589 ("reset: Add reset_control_bulk API")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220624141853.7417-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 919edbadeb ]
Jan Kara reported a performance regression in dbench that he
bisected down to commit bad77c375e ("xfs: CIL checkpoint
flushes caches unconditionally").
Whilst developing the journal flush/fua optimisations this cache was
part of, it appeared to made a significant difference to
performance. However, now that this patchset has settled and all the
correctness issues fixed, there does not appear to be any
significant performance benefit to asynchronous cache flushes.
In fact, the opposite is true on some storage types and workloads,
where additional cache flushes that can occur from fsync heavy
workloads have measurable and significant impact on overall
throughput.
Local dbench testing shows little difference on dbench runs with
sync vs async cache flushes on either fast or slow SSD storage, and
no difference in streaming concurrent async transaction workloads
like fs-mark.
Fast NVME storage.
>From `dbench -t 30`, CIL scale:
clients async sync
BW Latency BW Latency
1 935.18 0.855 915.64 0.903
8 2404.51 6.873 2341.77 6.511
16 3003.42 6.460 2931.57 6.529
32 3697.23 7.939 3596.28 7.894
128 7237.43 15.495 7217.74 11.588
512 5079.24 90.587 5167.08 95.822
fsmark, 32 threads, create w/ 64 byte xattr w/32k logbsize
create chown unlink
async 1m41s 1m16s 2m03s
sync 1m40s 1m19s 1m54s
Slower SATA SSD storage:
>From `dbench -t 30`, CIL scale:
clients async sync
BW Latency BW Latency
1 78.59 15.792 83.78 10.729
8 367.88 92.067 404.63 59.943
16 564.51 72.524 602.71 76.089
32 831.66 105.984 870.26 110.482
128 1659.76 102.969 1624.73 91.356
512 2135.91 223.054 2603.07 161.160
fsmark, 16 threads, create w/32k logbsize
create unlink
async 5m06s 4m15s
sync 5m00s 4m22s
And on Jan's test machine:
5.18-rc8-vanilla 5.18-rc8-patched
Amean 1 71.22 ( 0.00%) 64.94 * 8.81%*
Amean 2 93.03 ( 0.00%) 84.80 * 8.85%*
Amean 4 150.54 ( 0.00%) 137.51 * 8.66%*
Amean 8 252.53 ( 0.00%) 242.24 * 4.08%*
Amean 16 454.13 ( 0.00%) 439.08 * 3.31%*
Amean 32 835.24 ( 0.00%) 829.74 * 0.66%*
Amean 64 1740.59 ( 0.00%) 1686.73 * 3.09%*
Performance and cache flush behaviour is restored to pre-regression
levels.
As such, we can now consider the async cache flush mechanism an
unnecessary exercise in premature optimisation and hence we can
now remove it and the infrastructure it requires completely.
Fixes: bad77c375e ("xfs: CIL checkpoint flushes caches unconditionally")
Reported-and-tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd6f79d1fb ]
Brian reported a null pointer dereference failure during unmount in
xfs/006. He tracked the problem down to the AIL being torn down
before a log shutdown had completed and removed all the items from
the AIL. The failure occurred in this path while unmount was
proceeding in another task:
xfs_trans_ail_delete+0x102/0x130 [xfs]
xfs_buf_item_done+0x22/0x30 [xfs]
xfs_buf_ioend+0x73/0x4d0 [xfs]
xfs_trans_committed_bulk+0x17e/0x2f0 [xfs]
xlog_cil_committed+0x2a9/0x300 [xfs]
xlog_cil_process_committed+0x69/0x80 [xfs]
xlog_state_shutdown_callbacks+0xce/0xf0 [xfs]
xlog_force_shutdown+0xdf/0x150 [xfs]
xfs_do_force_shutdown+0x5f/0x150 [xfs]
xlog_ioend_work+0x71/0x80 [xfs]
process_one_work+0x1c5/0x390
worker_thread+0x30/0x350
kthread+0xd7/0x100
ret_from_fork+0x1f/0x30
This is processing an EIO error to a log write, and it's
triggering a force shutdown. This causes the log to be shut down,
and then it is running attached iclog callbacks from the shutdown
context. That means the fs and log has already been marked as
xfs_is_shutdown/xlog_is_shutdown and so high level code will abort
(e.g. xfs_trans_commit(), xfs_log_force(), etc) with an error
because of shutdown.
The umount would have been blocked waiting for a log force
completion inside xfs_log_cover() -> xfs_sync_sb(). The first thing
for this situation to occur is for xfs_sync_sb() to exit without
waiting for the iclog buffer to be comitted to disk. The
above trace is the completion routine for the iclog buffer, and
it is shutting down the filesystem.
xlog_state_shutdown_callbacks() does this:
{
struct xlog_in_core *iclog;
LIST_HEAD(cb_list);
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
do {
if (atomic_read(&iclog->ic_refcnt)) {
/* Reference holder will re-run iclog callbacks. */
continue;
}
list_splice_init(&iclog->ic_callbacks, &cb_list);
>>>>>> wake_up_all(&iclog->ic_write_wait);
>>>>>> wake_up_all(&iclog->ic_force_wait);
} while ((iclog = iclog->ic_next) != log->l_iclog);
wake_up_all(&log->l_flush_wait);
spin_unlock(&log->l_icloglock);
>>>>>> xlog_cil_process_committed(&cb_list);
}
This wakes any thread waiting on IO completion of the iclog (in this
case the umount log force) before shutdown processes all the pending
callbacks. That means the xfs_sync_sb() waiting on a sync
transaction in xfs_log_force() on iclog->ic_force_wait will get
woken before the callbacks attached to that iclog are run. This
results in xfs_sync_sb() returning an error, and so unmount unblocks
and continues to run whilst the log shutdown is still in progress.
Normally this is just fine because the force waiter has nothing to
do with AIL operations. But in the case of this unmount path, the
log force waiter goes on to tear down the AIL because the log is now
shut down and so nothing ever blocks it again from the wait point in
xfs_log_cover().
Hence it's a race to see who gets to the AIL first - the unmount
code or xlog_cil_process_committed() killing the superblock buffer.
To fix this, we just have to change the order of processing in
xlog_state_shutdown_callbacks() to run the callbacks before it wakes
any task waiting on completion of the iclog.
Reported-by: Brian Foster <bfoster@redhat.com>
Fixes: aad7272a92 ("xfs: separate out log shutdown callback processing")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8c5682597 ]
xfs_reserve_blocks controls the size of the user-visible free space
reserve pool. Given the difference between the current and requested
pool sizes, it will try to reserve free space from fdblocks. However,
the amount requested from fdblocks is also constrained by the amount of
space that we think xfs_mod_fdblocks will give us. If we forget to
subtract m_allocbt_blks before calling xfs_mod_fdblocks, it will will
return ENOSPC and we'll hang the kernel at mount due to the infinite
loop.
In commit fd43cf600c, we decided that xfs_mod_fdblocks should not hand
out the "free space" used by the free space btrees, because some portion
of the free space btrees hold in reserve space for future btree
expansion. Unfortunately, xfs_reserve_blocks' estimation of the number
of blocks that it could request from xfs_mod_fdblocks was not updated to
include m_allocbt_blks, so if space is extremely low, the caller hangs.
Fix this by creating a function to estimate the number of blocks that
can be reserved from fdblocks, which needs to exclude the set-aside and
m_allocbt_blks.
Found by running xfs/306 (which formats a single-AG 20MB filesystem)
with an fstests configuration that specifies a 1k blocksize and a
specially crafted log size that will consume 7/8 of the space (17920
blocks, specifically) in that AG.
Cc: Brian Foster <bfoster@redhat.com>
Fixes: fd43cf600c ("xfs: set aside allocation btree blocks from block reservation")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7993f1a431 ]
As part of multiple customer escalations due to file data corruption
after copy on write operations, I wrote some fstests that use fsstress
to hammer on COW to shake things loose. Regrettably, I caught some
filesystem shutdowns due to incorrect rmap operations with the following
loop:
mount <filesystem> # (0)
fsstress <run only readonly ops> & # (1)
while true; do
fsstress <run all ops>
mount -o remount,ro # (2)
fsstress <run only readonly ops>
mount -o remount,rw # (3)
done
When (2) happens, notice that (1) is still running. xfs_remount_ro will
call xfs_blockgc_stop to walk the inode cache to free all the COW
extents, but the blockgc mechanism races with (1)'s reader threads to
take IOLOCKs and loses, which means that it doesn't clean them all out.
Call such a file (A).
When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which
walks the ondisk refcount btree and frees any COW extent that it finds.
This function does not check the inode cache, which means that incore
COW forks of inode (A) is now inconsistent with the ondisk metadata. If
one of those former COW extents are allocated and mapped into another
file (B) and someone triggers a COW to the stale reservation in (A), A's
dirty data will be written into (B) and once that's done, those blocks
will be transferred to (A)'s data fork without bumping the refcount.
The results are catastrophic -- file (B) and the refcount btree are now
corrupt. In the first patch, we fixed the race condition in (2) so that
(A) will always flush the COW fork. In this second patch, we move the
_recover_cow call to the initial mount call in (0) for safety.
As mentioned previously, xfs_reflink_recover_cow walks the refcount
btree looking for COW staging extents, and frees them. This was
intended to be run at mount time (when we know there are no live inodes)
to clean up any leftover staging events that may have been left behind
during an unclean shutdown. As a time "optimization" for readonly
mounts, we deferred this to the ro->rw transition, not realizing that
any failure to clean all COW forks during a rw->ro transition would
result in catastrophic corruption.
Therefore, remove this optimization and only run the recovery routine
when we're guaranteed not to have any COW staging extents anywhere,
which means we always run this at mount time. While we're at it, move
the callsite to xfs_log_mount_finish because any refcount btree
expansion (however unlikely given that we're removing records from the
right side of the index) must be fed by a per-AG reservation, which
doesn't exist in its current location.
Fixes: 174edb0e46 ("xfs: store in-progress CoW allocations in the refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51dd64bb99 upstream.
This reverts commit ccf11dbaa0.
Commit ccf11dbaa0 ("evm: Fix memleak in init_desc") said there is
memleak in init_desc. That may be incorrect, as we can see, tmp_tfm is
saved in one of the two global variables hmac_tfm or evm_tfm[hash_algo],
then if init_desc is called next time, there is no need to alloc tfm
again, so in the error path of kmalloc desc or crypto_shash_init(desc),
It is not a problem without freeing tmp_tfm.
And also that commit did not reset the global variable to NULL after
freeing tmp_tfm and this makes *tfm a dangling pointer which may cause a
UAF issue.
Reported-by: Guozihua (Scott) <guozihua@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d684e0a52d upstream.
Recently, nommu iounmap() was converted from a static inline function to a
macro again, basically reverting commit 4580ba4ad2 ("sh: Convert
iounmap() macros to inline functions"). With -Werror, this leads to build
failures like:
drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps':
drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable]
1195 | struct ams *ams = data;
| ^~~
Fix this by replacing the macros for ioremap() and iounmap() by static
inline functions, based on <asm-generic/io.h>.
Link: https://lkml.kernel.org/r/8d1b1766260961799b04035e7bc39a7f59729f72.1655708312.git.geert+renesas@glider.be
Fixes: 13f1fc870d ("sh: move the ioremap implementation out of line")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5924e6ec15 upstream.
The permission flags of newly created symlinks are wrongly dropped on
nilfs2 with the current umask value even though symlinks should have 777
(rwxrwxrwx) permissions:
$ umask
0022
$ touch file && ln -s file symlink; ls -l file symlink
-rw-r--r--. 1 root root 0 Jun 23 16:29 file
lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file
This fixes the bug by inserting a missing check that excludes
symlinks.
Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Tommy Pettersson <ptp@lysator.liu.se>
Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5750676b64 upstream.
If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.
Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.
Reported-by: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de>
Fixes: 1383a7ed67 ("vfs: check file ranges before cloning files")
Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9fc33eaaa9 upstream.
Calling madvise IOCTL twice on BO causes memory shrinker list corruption
and crashes kernel because BO is already on the list and it's added to
the list again, while BO should be removed from the list before it's
re-added. Fix it.
Cc: stable@vger.kernel.org
Fixes: 013b651013 ("drm/panfrost: Add madvise and shrinker support")
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-3-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb6e0637ab upstream.
When panfrost_mmu_map_fault_addr() fails, the BO's mapping should be
unreferenced and not the shmem object which backs the mapping.
Cc: stable@vger.kernel.org
Fixes: bdefca2d8d ("drm/panfrost: Add the panfrost_gem_mapping concept")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630200601.1884120-2-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter
Pablo Neira Ayuso
William Zhang
Michal Suchanek
Ryan Wanner
Kuniyuki Iwashima
Siddharth Vadapalli
Jon Hunter
Peter Ujfalusi
Hector Martin
Martin Povišer
Francesco Dolcini
Huaxin Lu
Hangyu Hua
Maxim Mikityanskiy
Gal Pressman
Paul Blakey
Tariq Toukan
Zhen Lei
Ard Biesheuvel
Cristian Ciocaltea
Kris Bahnsen
Serge Semin
Dave Chinner
Darrick J. Wong
Xiu Jianfeng
Geert Uytterhoeven
Ryusuke Konishi
Dmitry Osipenko