Граф коммитов

2913 Коммитов

Автор SHA1 Сообщение Дата
Pablo Neira Ayuso 80d326fab5 netlink: add netlink_dump_control structure for netlink_dump_start()
Davem considers that the argument list of this interface is getting
out of control. This patch tries to address this issue following
his proposal:

struct netlink_dump_control c = { .dump = dump, .done = done, ... };

netlink_dump_start(..., &c);

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26 14:10:06 -05:00
David S. Miller d5ef8a4d87 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/infiniband/hw/nes/nes_cm.c

Simple whitespace conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-10 23:32:28 -05:00
Linus Torvalds 8df54d622a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Quoth David:

1) GRO MAC header comparisons were ethernet specific, breaking other
   link types.  This required a multi-faceted fix to cure the originally
   noted case (Infiniband), because IPoIB was lying about it's actual
   hard header length.  Thanks to Eric Dumazet, Roland Dreier, and
   others.

2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular.
   From Anisse Astier.

3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman.

4) ipv4 TCP reset generation needs to respect any network interface
   binding from the socket, otherwise route lookups might give a
   different result than all the other segments received.  From Shawn
   Lu.

5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas
   Graf.

6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda.

7) Revert skge PCI mapping changes that are causing crashes for some
   folks, from Stephen Hemminger.

8) IPV4 route lookups fill in the wildcarded fields of the given flow
   lookup key passed in, which is fine most of the time as this is
   exactly what the caller's want.  However there are a few cases that
   want to retain the original flow key values afterwards, so handle
   those cases properly.  Fix from Julian Anastasov.

9) IGB/IXGBE VF lookup bug fixes from Greg Rose.

10) Properly null terminate filename passed to ethtool flash device
    method, from Ben Hutchings.

11) S3 resume fix in via-velocity from David Lv.

12) Fix double SKB free during xmit failure in CAIF, from Dmitry
    Tarnyagin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
  net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled
  ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.
  netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m
  netprio_cgroup: don't allocate prio table when a device is registered
  netprio_cgroup: fix an off-by-one bug
  bna: fix error handling of bnad_get_flash_partition_by_offset()
  isdn: type bug in isdn_net_header()
  net: Make qdisc_skb_cb upper size bound explicit.
  ixgbe: ethtool: stats user buffer overrun
  ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
  ixgbe: do not update real num queues when netdev is going away
  ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
  ixgbe: Fix case of Tx Hang in PF with 32 VFs
  ixgbe: fix vf lookup
  igb: fix vf lookup
  e1000: add dropped DMA receive enable back in for WoL
  gro: more generic L2 header check
  IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
  zd1211rw: firmware needs duration_id set to zero for non-pspoll frames
  net: enable TC35815 for MIPS again
  ...
2012-02-10 14:18:46 -08:00
Roland Dreier 936d7de3d7 IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
Commit a0417fa3a1 ("net: Make qdisc_skb_cb upper size bound
explicit.") made it possible for a netdev driver to use skb->cb
between its header_ops.create method and its .ndo_start_xmit
method.  Use this in ipoib_hard_header() to stash away the LL address
(GID + QPN), instead of the "ipoib_pseudoheader" hack.  This allows
IPoIB to stop lying about its hard_header_len, which will let us fix
the L2 check for GRO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08 18:26:54 -05:00
Roland Dreier 377cb4f9e7 IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
Commit a0417fa3a1 ("net: Make qdisc_skb_cb upper size bound
explicit.") made it possible for a netdev driver to use skb->cb
between its header_ops.create method and its .ndo_start_xmit
method.  Use this in ipoib_hard_header() to stash away the LL address
(GID + QPN), instead of the "ipoib_pseudoheader" hack.  This allows
IPoIB to stop lying about its hard_header_len, which will let us fix
the L2 check for GRO.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-08 15:50:01 -05:00
Jesper Juhl 715252d419 IB/srpt: Don't return freed pointer from srpt_alloc_ioctx_ring()
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-06 08:57:11 -08:00
Dan Carpenter 3af336376f IB/srpt: Fix ERR_PTR() vs. NULL checking confusion
transport_init_session() and target_fabric_configfs_init() don't
return NULL pointers, they only return ERR_PTRs or valid pointers.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-03 09:07:00 -08:00
Jesper Juhl ebfded8c4b IB/srpt: Remove unneeded <linux/version.h> include
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02 12:55:59 -08:00
Roland Dreier f225066b64 IB/srpt: Use ARRAY_SIZE() instead of open-coding
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02 12:55:58 -08:00
Roland Dreier 486d8b9f88 IB/srpt: Use DEFINE_SPINLOCK()/LIST_HEAD()
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-02 12:55:58 -08:00
Roland Dreier f36ae34238 Merge branches 'cma', 'ipath', 'misc', 'mlx4', 'nes' and 'qib' into for-next 2012-01-30 16:18:21 -08:00
Tatyana Nikolova c5488c571f RDMA/nes: Copyright update
Update copyright information in the source files.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-30 16:18:07 -08:00
Jack Morgenstein a6f7feae6d IB/mlx4: pass SMP vendor-specific attribute MADs to firmware
In the current code, vendor-specific MADs (e.g with the FDR-10
attribute) are silently dropped by the driver, resulting in timeouts
at the sending side and inability to query/configure the relevant
feature.  However, the ConnectX firmware is able to handle such MADs.
For unsupported attributes, the firmware returns a GET_RESPONSE MAD
containing an error status.

For example, for a FDR-10 node with LID 11:

    # ibstat mlx4_0 1

    CA: 'mlx4_0'
    Port 1:
    State: Active
    Physical state: LinkUp
    Rate: 40 (FDR10)
    Base lid: 11
    LMC: 0
    SM lid: 24
    Capability mask: 0x02514868
    Port GUID: 0x0002c903002e65d1
    Link layer: InfiniBand

Extended Port Query (EPI) vendor mad timeouts before the patch:

    # smpquery MEPI 11 -d

    ibwarn: [4196] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [4196] _do_madrpc: retry 1 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: retry 2 (timeout 1000 ms)
    ibwarn: [4196] _do_madrpc: timeout after 3 retries, 3000 ms
    ibwarn: [4196] mad_rpc: _do_madrpc failed; dport (Lid 11)
    smpquery: iberror: [pid 4196] main: failed: operation EPI: ext port info query failed

EPI query works OK with the patch:

    # smpquery MEPI 11 -d

    ibwarn: [6548] smp_query_via: attr 0xff90 mod 0x0 route Lid 11
    ibwarn: [6548] mad_rpc: data offs 64 sz 64
    mad data
    0000 0000 0000 0001 0000 0001 0000 0001
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    0000 0000 0000 0000 0000 0000 0000 0000
    # Ext Port info: Lid 11 port 0
    StateChangeEnable:...............0x00
    LinkSpeedSupported:..............0x01
    LinkSpeedEnabled:................0x01
    LinkSpeedActive:.................0x01

Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Ira Weiny <weiny2@llnl.gov>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-30 16:15:17 -08:00
Tatyana Nikolova 4a4b03f4ef RDMA/nes: Fix fast memory registration opcode
Fix fast memory registration opcode in local invalidate completion.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Donald Wood <Donald.E.Wood@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 10:15:13 -08:00
Tatyana Nikolova 94f622bdac RDMA/nes: Fix fast memory registration length
Zero high order word of fast memory registration (FMR) length field.
FMR length field is 32 bits, so high word should always be zero.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Donald Wood <Donald.E.Wood@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 10:14:51 -08:00
Sean Hefty 9ced69ca52 RDMA/ucma: Discard all events for new connections until accepted
After reporting a new connection request to user space, the rdma_ucm
will discard subsequent events until the user has associated a user
space idenfier with the kernel cm_id.  This is needed to avoid
reporting a reject/disconnect event to the user for a request that
they may not have processed.

The user space identifier is set once the user tries to accept the
connection request.  However, the following race exists in ucma_accept():

	ctx->uid = cmd.uid;
	<events may be reported now>
	ret = rdma_accept(ctx->cm_id, ...);

Once ctx->uid has been set, new events may be reported to the user.
While the above mentioned race is avoided, there is an issue that the
user _may_ receive a reject/disconnect event if rdma_accept() fails,
depending on when the event is processed.  To simplify the use of
rdma_accept(), discard all events unless rdma_accept() succeeds.

This problem was discovered based on questions from Roland Dreier
<roland@purestorage.com>.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 10:07:48 -08:00
Mike Marciniszyn b6bfefb041 IB/qib: Roll back PCIe tuning change
Commit 8d4548f2b ("IB/qib: Default some module parameters optimally")
introduced an issue with older root complexes.  They cannot handle the
pcie_caps of 0x51 (MaxReadReq 4096, MaxPayload=256).

A typical diagnostic in this situation reported by syslog contains
the text:

  [PCIe Poisoned TLP][Send DMA memory read]

Restore the module paramter default to zero with will avoid any
changes in the root complex.

Reviewed-by: Mark Debbage <mark.debbage@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 10:03:38 -08:00
Julia Lawall 0f3696eb21 IB/qib: Use GFP_ATOMIC when locks are held
alloc_dummy_hdrq() is called with locks held and thus should not use
GFP_KERNEL.

The semantic patch that makes this report is available in
scripts/coccinelle/locks/call_kern.cocci.

Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 09:59:22 -08:00
Roland Dreier 7525c85be0 RDMA/nes: Add missing rcu_read_unlock() in nes_addr_resolve_neigh()
Make sure all exit paths from this function unlock everything.

Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 09:54:30 -08:00
Tatyana Nikolova 81f99dcc93 RDMA/nes: Fix for sending MPA reject frame
Set a reject flag, when sending MPA reject message to inform the peer
that the application has rejected the connection.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 09:50:48 -08:00
Dan Carpenter ef5352875a IB/ipath: Calling PTR_ERR() on right variable in create_file()
"dentry" is a valid pointer.  "*dentry" was intended.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 09:48:27 -08:00
Bernd Schubert e47e321a35 RDMA/core: Fix kernel panic by always initializing qp->usecnt
We have just been investigating kernel panics related to
cq->ibcq.event_handler() completion calls.  The problem is that
ib_destroy_qp() fails with -EBUSY.

Further investigation revealed qp->usecnt is not initialized.  This
counter was introduced in linux-3.2 by commit 0e0ec7e063
("RDMA/core: Export ib_open_qp() to share XRC TGT QPs") but it only
gets initialized for IB_QPT_XRC_TGT, but it is checked in
ib_destroy_qp() for any QP type.

Fix this by initializing qp->usecnt for every QP we create.

Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de>
Signed-off-by: Sven Breuner <sven.breuner@itwm.fraunhofer.de>

[ Initialize qp->usecnt in uverbs too.  - Sean ]

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-27 09:20:10 -08:00
David Miller e55684fadb infiniband: nes: Convert nes_addr_resolve_neigh() over to dst_neigh_lookup().
Now we must provide the IP destination address, and a reference has
to be dropped when we're done with the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25 21:30:37 -05:00
David Miller 64b7007eb9 infiniband: cxgb4: Convert import_ep() over to dst_neigh_lookup().
Now we must provide the IP destination address, and a reference has
to be dropped when we're done with the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25 21:30:37 -05:00
David Miller 02b619555a infiniband: Convert dst_fetch_ha() over to dst_neigh_lookup().
Now we must provide the IP destination address, and a reference has
to be dropped when we're done with the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25 21:30:36 -05:00
Linus Torvalds f59e842fc0 Merge branch 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ib_srpt: Initial SRP Target merge for v3.3-rc1
2012-01-18 16:29:42 -08:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Rusty Russell 69116f279a module_param: avoid bool abuse, add bint for special cases.
For historical reasons, we allow module_param(bool) to take an int (or
an unsigned int).  That's going away.

A few drivers really want an int: they set it to -1 and a parameter
will set it to 0 or 1.  This sucks: reading them from sysfs will give
'Y' for both -1 and 1, but if we change it to an int, then the users
might be broken (if they did "param" instead of "param=1").

Use a new 'bint' parser for them.

(ntfs has a different problem: it needs an int for debug_msgs because
it's also exposed via sysctl.)

Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Cc: Christoph Raisch <raisch@de.ibm.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: linux390@de.ibm.com
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: lm-sensors@lm-sensors.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: alsa-devel@alsa-project.org
Acked-by: Takashi Iwai <tiwai@suse.de> (For the sound part)
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> (For the hwmon driver)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:17 +10:30
Linus Torvalds 48fa57ac2c infiniband changes for 3.3 merge window
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJPBQQDAAoJEENa44ZhAt0hy1EP/A/dz741mEd2QZxYHgloK8XU
 sSoHvq+vDxHnOvBrDuaHXT47FoY+OSVE+ESeJJQJ9L+B6g3yacP3hNSIcguXFs8Z
 v011AZAeRvQx3bLu5R9+eDL+YTyotkR0sl/huoLkSwlqrEqGA85eLqf5RSQdxYZf
 iC1ZXfg0KTrtb6rBvohNcijpmIVEe83SWfnD/ZuCGuWq++DyVJxzECnR7p5D8a9q
 eMJEnIKVEIpqkqXrPQr/blVSfGQL54QuUdYtoKAS8ZW6BzjIwCGUmKdoT1vaNqX5
 sIntxXMcgIgE2r0y/nDK+QIFS4U784eUevIC/LeunbhWUEQX05f3l6+V566/T9hX
 lvp5M6aonsSSvtqrVi6SF5rvSHFlwPpvAY3+jhjXKLpZ5OxMqf/ZlTN1xN4bin1A
 whGnznU+51Tjzph6Or8iXo5yExDUQhowX1Z3CYDmh/UqzKHRqaFAuiC071r8GZW3
 BEOV9yf/+qPsgtXAiO4jSKlLrOJbMgEI4BoITXTO9HvZH9dHGXDYLvULdHDmFaBi
 XLg5zcAjou24855miv/gnBQzDc0NWW184BGS9hPE9zmbQlJr7gA4zI0Eggtj+3MO
 7z/SLTrxKSfjZJR8Z3cGsnBjCs1VFqV+YQnTkyZYLORLf4F3RbDLe6aJQ+9WBA1g
 86J11MjrG30erg3gbXun
 =8ZmW
 -----END PGP SIGNATURE-----

Merge tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

infiniband changes for 3.3 merge window

* tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  rdma/core: Fix sparse warnings
  RDMA/cma: Fix endianness bugs
  RDMA/nes: Fix terminate during AE
  RDMA/nes: Make unnecessarily global nes_set_pau() static
  RDMA/nes: Change MDIO bus clock to 2.5MHz
  IB/cm: Fix layout of APR message
  IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE
  IB/qib: Default some module parameters optimally
  IB/qib: Optimize locking for get_txreq()
  IB/qib: Fix a possible data corruption when receiving packets
  IB/qib: Eliminate 64-bit jiffies use
  IB/qib: Fix style issues
  IB/uverbs: Protect QP multicast list
2012-01-08 14:05:48 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Roland Dreier 1583676d9e Merge branches 'cma', 'misc', 'mlx4', 'nes', 'qib' and 'uverbs' into for-next 2012-01-04 09:18:20 -08:00
Sean Hefty c89d1bedf8 rdma/core: Fix sparse warnings
Clean up sparse warnings in the rdma core layer.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04 09:17:45 -08:00
Sean Hefty 46ea5061c7 RDMA/cma: Fix endianness bugs
Fix endianness bugs reported by sparse in the RDMA core stack.  Note
that these are real bugs, but don't affect any existing code to the
best of my knowledge.  The mlid issue would only affect kernel users
of rdma_join_multicast which have the rdma_cm attach/detach its QP.
There are no current in tree users that do this. (rdma_join_multicast
may be used called by user space applications, which does not have
this issue.)  And the pkey setting is simply returned as
informational.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04 09:13:52 -08:00
Tatyana Nikolova 196f40c846 RDMA/nes: Fix terminate during AE
Fix for reset which happens right after sending a terminate message.
Terminate timer is not deleted when the connection is closed.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04 09:12:39 -08:00
Tatyana Nikolova b0fda90f2a RDMA/nes: Make unnecessarily global nes_set_pau() static
Warned about by sparse.

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04 09:07:24 -08:00
Tatyana Nikolova 30b7e117af RDMA/nes: Change MDIO bus clock to 2.5MHz
Change the PHY clock divisor to make the MDIO clock 2.5MHz, instead of
3.5MHz (which is out of spec).

Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Faisal Latif <Faisal.Latif@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-04 09:02:15 -08:00
Eli Cohen 6f233d300d IB/cm: Fix layout of APR message
Add a missing 16-bit reserved field between ap_status and info fields.

Signed-off-by: Eli Cohen <eli@mellanox.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 21:04:18 -08:00
Or Gerlitz 9106c41069 IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE
For IBoE, SLs 0-7 are mapped to Ethernet 802.1Q user priority bits
(pbits) which are part of the VLAN tag, SLs 8-15 are reserved.

Under Ethernet, the ConnectX firmware treats (decode/encode) the four
bit SL field in various constructs such as QPC / UD WQE / CQE as PPP0
and not as 0PPP. This correlates well to the fact that within the
vlan tag the pbits are located in bits 15-13 and not 12-14.

The current code wasn't consistent around that area - the
encoding was correct for the IBoE QPC.path.schedule_queue field,
but was wrong for IBoE CQEs and when MLX header was built.

These inconsistencies resulted in wrong SL <--> wire 802.1Q pbits
mapping, which is fixed by using SL <--> PPP0 all around the place.

Signed-off-by: Oren Duer <oren@mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 21:00:02 -08:00
Mike Marciniszyn 8d4548f2b7 IB/qib: Default some module parameters optimally
Minimize the need for users to have to set module parameters to get
good performance.

The following two parameters are changed:
 - rcvhdrcnt to twice the rcvegrcnt
 - pcie_caps=0x51

The rcvhdrcnt at twice the egrcount allows the preemptive NAK code
during reception to function in 100% of the cases rather than a sender
jiffies-based timeout.

The pcie_caps default of 0x51 will set the proposed MaxPayload and
MaxReceiveReqest to 256 and 4096 respectively.  The capabilities on
the root complex will be used to limit those values.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:54:01 -08:00
Mike Marciniszyn 4894710951 IB/qib: Optimize locking for get_txreq()
The current code locks the QP s_lock, followed by the pending_lock, I
guess to to protect against the allocate failing.

This patch only locks the pending_lock, assuming that the empty case
is an exeception, in which case the pending_lock is dropped, and the
original code is executed.  This will save a lock of s_lock in the
normal case.

The observation is that the sdma descriptors will deplete at twice the
rate of txreq's, so this should be rare.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:53:31 -08:00
Ram Vepa eddfb67525 IB/qib: Fix a possible data corruption when receiving packets
Prevent a receive data corruption by ensuring that the write to update
the rcvhdrheadn register to generate an interrupt is at the very end
of the receive processing.

Signed-off-by: Ramkrishna Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:53:02 -08:00
Mike Marciniszyn 8482d5d1bc IB/qib: Eliminate 64-bit jiffies use
The qib driver makes use of the the 64-bit jiffies API.

Code inspection reveals that that version of the API is not really
required.  This patch converts to use the "normal" jiffies.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:52:12 -08:00
Mike Marciniszyn 865b64be86 IB/qib: Fix style issues
More style issues revealed with checkpatch.pl -f.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:51:42 -08:00
Eli Cohen e214a0fe2b IB/uverbs: Protect QP multicast list
Userspace verbs multicast attach/detach operations on a QP are done
while holding the rwsem of the QP for reading.  That's not sufficient
since a reader lock allows more than one reader to acquire the
lock.  However, multicast attach/detach does list manipulation that
can corrupt the list if multiple threads run in parallel.

Fix this by acquiring the rwsem as a writer to serialize attach/detach
operations.  Add idr_write_qp() and put_qp_write() to encapsulate
this.

This fixes oops seen when running applications that perform multicast
joins/leaves.

Reported by: Mike Dubman <miked@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-01-03 20:36:48 -08:00
Al Viro f9ec80061a infiniband: umode_t noise, including open-coded S_ISDIR()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:03 -05:00
Al Viro 587a1f1659 switch ->is_visible() to returning umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Al Viro 2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
David S. Miller abb434cb05 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	net/bluetooth/l2cap_core.c

Just two overlapping changes, one added an initialization of
a local variable, and another change added a new local variable.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23 17:13:56 -05:00
Roland Dreier 480390c8f3 Merge branches 'cma', 'mlx4' and 'qib' into for-next 2011-12-19 09:19:49 -08:00
Mike Marciniszyn 29d1b16145 IB/qib: Correct sense on freectxts increment and decrement
Commit 53ab1c6498 ("IB/qib: Correct nfreectxts for multiple HCAs")
reversed the increments and decrements of dd->nfreectxts.  Fix it.

Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-12-19 09:19:34 -08:00