Modify the sysfs description of a video mode such that modes are tagged with
their scan type, (p)rogessive, (i)nterlaced, (d)ouble scan. For example,
U:1920x1080i-50. This is useful to disambiguate some of the 'consumer' video
timings found in CEA-861 (especially those for EDTV).
Signed-off-by: Daniel R Thompson <daniel.thompson@st.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a new framebuffer driver for the Intel Based macs. This
framebuffer is needed when booting from EFI to get something out the box.
[akpm: note: doesn't support modular building]
[akpm@osdl.org: cleanups]
Signed-off-by: Edgar Hucek <hostmaster@ed-soft.at>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the following warning:
WARNING: drivers/video/aty/atyfb.o - Section mismatch: reference to
.init.text:aty_init_cursor from .text between 'aty_init' (at offset 0x241d)
and 'atyfb_blank'
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Logo drawing crashes or produces a corrupt display if the logo width and
height are not equal. The dimensions are transposed prior to the actual
rotation and the width is used instead of the height in the actual rotation
code. These produce a corrupt image.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a fix for the most annoying problem that remained with neofb:
After "setterm -powersave powerdown" the console blanker will disable the
backlight after the given timeout expires. If this happens after the lid
has been shut, we read "LCD off" from the register and store that in the
driver. Once the lid is opened, the backlight turns on, but any key press
that would awaken the blanked console will switch the backlight off again.
The workaround so far was to use the "display config toggle" Fn key combo -
once if no external display is attached, otherwise as often as required to
restore the desired display setup.
The following patch fixes the issue at least for the LCD-only case, with no
external monitor attached. Other display setup permutations are pending
further testing, but so far I can guarantee at least no negative change in
behaviour, if any at all.
Signed-off-by: Christian Trefzer <ctrefzer@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
CONFIG_FB = m and CONFIG_{BACKLIGHT:LCD}_CLASS_DEVICE = y is possible
resulting in link errors. Fix by making backlight and lcd class also depend
on FB
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
regs.lcdcon1 was not updated on suspend. The result was a garbaged display on
resume. This bug was first noticed by Christer Weinigel. This patch is a
modified version of the one he sent to me.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Delay the update of the visible framebuffer console until all other consoles
have been initialized in order to avoid losing information. This only seems
to be a problem with modules, not with built-in drivers.
Signed-off-by: David Hollister <david.hollister@amd.com>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- As per VESA specs, use the VGA registers to set the palette if the mode is
VGA compatible. Otherwise, use the protected mode interface.
- Make pmi_setpal default to 1
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the hardware palette cannot be accessed, make vesafb_setcolreg return a
nonzero value.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for Geforce 6100 and related chipsets (PCI device id 0x024x)
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- make firmware edid independent from framebuffer (No need to choose
framebuffer just to disable this option
- enable this option in X86_64
- check if VBE/DDC function is implemented before calling actual function
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A static pseudocolor visual with depth less than 4 does exist, so let's not
accidentally upscale the depth with this configuration
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Set the appropriate acceleration flags so fbcon can choose the optimal
scrolling mode.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The drawing functions of atyfb is unecessary syncing the GPU which is
affecting performance. Remove the calls, any direct access by fbcon to the
framebuffer will always be preceeded by a call to atyfb_sync().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix image and color handling in atyfb_cursor()
- In the 2-bit scheme of the cursor image, just set the first bit to be
always zero (turn off transparency and/or XOR), and just do the masking
manually
- The cursor color is converted into 32-bit RGBA8888 using struct fb_cmap.
Each component in the cmap is u16 in size, so mask the upper 8 bits.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nVidia is churning out chipsets like there's no tomorrow. And even though the
pci_device_id table now has numerous entries, it is still not guaranteed that
all supported devices are included or will be included.
Fortunately, nvidiafb has chipset detection logic built in. So, change the
contents of the pci_device_id table so it will capture all nVidia devices of
the display class. Unsupported chipsets will then be filtered out by
nvidiafb's detection logic.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The EDID block should specify the display's operating limits (vertical and
horizontal sync ranges, and maximum dot clock). If not given by the EDID
block, the ranges are extrapolated from the modelist. However, the
computation used is only a rough approximation, and the resulting values may
not reflect the actual capability of the display. This problem is frequently
encountered when the EDID block has a single entry, the single mode entry will
fail validation.
To prevent this, calculate the values based on the same method used in
fb_validate_mode().
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove unneeded duplicate #include's of the same header file.
In the case of fbmon.c linux/pci.h is now #include'd unconditional, but
this should be safe.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We had three (sic) VIDEO_SELECT options:
- two in drivers/video/Kconfig
- one in drivers/video/console/Kconfig
This patch removes the two options in drivers/video/Kconfig and also removes
the unneeded usage in drivers/video/sis/sis_main.c .
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add backlight intensity control to the LOCOMO lcd/backlight driver using the
backlight class and add basic power management support.
This is a reimplementation and improvement of patches by John Lenz and Pavel
Machek
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reported by: Rich (Bugzilla Bug 6417)
"if savage driver is used in x.org together with savagefb, it results in
seriously garbled and distorted screen - coupled with severe slowdowns."
This bug is the result of Xorg unable to handle savagefb altering the
hardware which results in X failing to start properly and/or failed console
switching.
Add savagefb_state_save and savagefb_state_restore. These hooks will only
save and restore the extended VGA registers. Standard VGA registers will be
left alone. This is enough to make savagefb play nicely with the latest
Xorg savage driver, and perhaps with savage DRI. (Transient screen artifacts
may appear before X loads and during console switches).
(Unfortunately, blanking the screen also leaves Xorg in a blanked state, so I
have to unblank the screen before Xorg loads. So I doubt if the transient
screen artifacts will be completely invisible but hopefully it will only be
for a shorter duration (not much).)
[akpm@osdl.org: cleanups]
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Cc: <rich@hq.vsaa.lv>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allocate space for 2 register states: 'current' for the current state of
the hardware, and 'saved', to be used for restoring the hardware to a sane
state. This is in preparation for the addition of state save and restore
hooks to make savagefb work together with the latest Xorg savage driver.
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The driver pdc202xx_old requires CONFIG_BLK_DEV_IDEDMA, so it's always
defined
Signed-off-by: Tobias Oed <tobiasoed@hotmail.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Michal Piotrowski reported the following validator assert:
hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdd: set_drive_speed_status: error=0xb4 { AbortedCommand LastFailedSense=0x0b }
============================
[ BUG: illegal lock usage! ]
----------------------------
illegal {in-hardirq-W} -> {hardirq-on-W} usage.
hdparm/1821 [HC0[0]:SC0[0]:HE1:SE1] takes:
(ide_lock){++..}, at: [<c0268388>] ide_dump_opcode+0x13/0x9b
[...]
stack backtrace:
[<c0104513>] show_trace+0x1b/0x20
[<c01045f1>] dump_stack+0x1f/0x24
[<c013976c>] print_usage_bug+0x1a5/0x1b1
[<c0139e90>] mark_lock+0x2ca/0x4f7
[<c013aa96>] __lockdep_acquire+0x47e/0xaa4
[<c013b536>] lockdep_acquire+0x67/0x7f
[<c030552d>] _spin_lock+0x24/0x32
[<c0268388>] ide_dump_opcode+0x13/0x9b
[<c02688b6>] ide_dump_status+0x4a6/0x4cc
[<c0267ae6>] ide_config_drive_speed+0x32a/0x33a
[<c0262dc5>] piix_tune_chipset+0x2ed/0x2f8
[<c0262e31>] piix_config_drive_xfer_rate+0x61/0xb5
[<c0263a82>] set_using_dma+0x2f/0x60
[<c0263bee>] ide_write_setting+0x4a/0xc3
[<c02647ca>] generic_ide_ioctl+0x8a/0x47f
[<f886003a>] idecd_ioctl+0xfd/0x133 [ide_cd]
[<c01f1fff>] blkdev_driver_ioctl+0x4b/0x5f
[<c01f2783>] blkdev_ioctl+0x770/0x7bd
[<c017dc0d>] block_ioctl+0x1f/0x21
[<c0189353>] do_ioctl+0x27/0x6e
[<c0189604>] vfs_ioctl+0x26a/0x280
[<c0189667>] sys_ioctl+0x4d/0x7e
[<c0305ed2>] sysenter_past_esp+0x63/0xa1
in ide_dump_opcode() takes the ide_lock in an irq-unsafe manner, i.e. this
function expects to be called with irqs disabled. But
ide_dump_ata[pi]_status() doesnt do that - it enables interrupts specifically.
That is a no-no - what guarantees that another IDE port couldnt generate an
IDE interrupt while we are dumping this error? The fix is to turn the
irq-enabling in these functions into irq-disabling.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the busproc from pdc202xx_old.c because:
- it handles the obsolete HDIO_TRISTATE_HWIF ioctl instead of the modern
HDIO_SET_BUSSTATE, so treats its argument wrong;
- I don't think that tristating both channels is good idea (probably can't
be done otherwise since there seems to be only single bit controlling this).
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function ide_timing_compute() fails to *actually* take drive's
specified minimum PIO/DMA cycle times into account -- when doing this, it
calls ide_timing_merge() on the 'struct ide_timing' argument which contains
garbage at the moment, and then ultimately destroys the read cycle time by
quantizing the ide_timing[] entry, instead of copying from that entry to
the argument structure, and only then doing a merge/quantize.
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
During an STR resume cycle, the ide master disk times-out when there is
also a slave present (especially CD). Increasing the timeout in ide-io
from 10,000 to 100,000 fixes this problem.
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This bit us a few kernels ago, and for some reason never made it's way
upstream.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=144743
Kernel panic - not syncing: drivers/ide/pci/piix.c:231:
spin_lock(drivers/ide/ide.c:c03cef28) already locked by driver/ide/ide-iops.c/1153.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Dave Jones <davej@redhat.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove a call to hwif->tuneproc() on the error path of
config_chipset_for_dma(), as its single caller
(pdc202xx_config_drive_xfer_rate()) will do the call in that case.
Signed-off-by: Tobias Oed <tobiasoed@hotmail.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After the previous patch SIGNAL_GROUP_EXIT implies a pending SIGKILL, we
can remove this check from copy_process() because we already checked
!signal_pending().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch optimizes zap_threads() for the case when there are no ->mm
users except the current's thread group. In that case we can avoid
'for_each_process()' loop.
It also adds a useful invariant: SIGNAL_GROUP_EXIT (if checked under
->siglock) always implies that all threads (except may be current) have
pending SIGKILL.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a preparation for the next patch. No functional changes.
Basically, this patch moves '->flags & SIGNAL_GROUP_EXIT' check into
zap_threads(), and 'complete(vfork_done)' into coredump_wait outside of
->mmap_sem protected area.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes tasklist_lock from zap_threads().
This is safe wrt:
do_exit:
The caller holds mm->mmap_sem. This means that task which
shares the same ->mm can't pass exit_mm(), so it can't be
unhashed from init_task.tasks or ->thread_group lists.
fork:
None of sub-threads can fork after zap_process(leader). All
processes which were created before this point should be
visible to zap_threads() because copy_process() adds the new
process to the tail of init_task.tasks list, and ->siglock
lock/unlock provides a memory barrier.
de_thread:
It does list_replace_rcu(&leader->tasks, ¤t->tasks).
So zap_threads() will see either old or new leader, it does
not matter. However, it can change p->sighand, so we should
use lock_task_sighand() in zap_process().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With this patch zap_process() sets SIGNAL_GROUP_EXIT while sending SIGKILL to
the thread group. This means that a TASK_TRACED task
1. Will be awakened by signal_wake_up(1)
2. Can't sleep again via ptrace_notify()
3. Can't go to do_signal_stop() after return
from ptrace_stop() in get_signal_to_deliver()
So we can remove all ptrace related stuff from coredump path.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With this patch a thread group is killed atomically under ->siglock. This is
faster because we can use sigaddset() instead of force_sig_info() and this is
used in further patches.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Daniel R Thompson
Edgar Hucek
Antonino A. Daplas
Christian Trefzer
Arnaldo Carvalho de Melo
Rodolfo Giometti
Arnaud Patard
Adrian Bunk
David Hollister
Dennis Munsie
Richard Purdie
Tobias Oed
Ingo Molnar
Sergei Shtylyov
Al Boldi
Alan Cox
Oleg Nesterov