The misc clock gating (MISCBDCGE) is disabled for controller reset and
reenabled once reset is complete.
Fix the case when error happens during reset, and clock gating is
left disabled. The clock gating should be reenabled also in this case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the VirtIO case the sof_pcm_open() function isn't called on the
host during guest streaming, which then leaves "work" structures
uninitialised. However it is then used to handle position update
messages from the DSP. Move their initialisation to immediately after
allocation of the containing structure.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use for_each_pcm_streams() to enumerate streams in sof_dai_load()
instead of doing that manually.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DSP power state logs with the state names
instead of values.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update tgl mach table with: Maxim98373 Amp and ALC5682 hp codec.
Both of the codecs are on I2S bus.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch does the below:
1. Adds the driver data and updates quirk info for TGL
with Max98373 speaker amp and ALC5682 headset codec.
2. Added max98373 speaker related code to common file for re-use.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "Spk Switch" and associated widget, route to max98360a
speaker amp for power saving, also remove the speaker_amp_init()
callback with complete separated tables for max98373 and max98360a.
Signed-off-by: Bhat, Uday M <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without the dynamic flag to allow runtime routing, the card cannot
probe on chromebooks because SOF is constantly waiting for the link.
Adding flag back to allow upstream kernels to work on rt5682 based
chromebooks since SOF can now ignore the hard coded front end.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The USB-audio driver may call snd_card_register() multiple times as
its probe function is per USB interface while some USB-audio devices
may provide multiple interfaces to assign different streams although
they belong to the same device. This works in most cases but the
registration is racy, hence it may miss the device recognition,
e.g. PA doesn't see certain devices when hotplugged.
The recent addition of the delayed registration quirk allows to sync
the registration at the last known interface, and the previous commit
added a new module option to allow the dynamic setup for that
purpose.
Now, this patch tries to find out and notifies for such devices that
require the delayed registration. It shows a message like:
Found post-registration device assignment: 1234abcd:02
If you hit this message, you can pass delayed_register module option
like:
snd_usb_audio.delayed_register=1234abcd:02
by just copying the last shown entry. If this works, it can be added
statically in the quirk list, registration_quirks[] found at the end
of sound/usb/quirks.c.
Link: https://lore.kernel.org/r/20200325103322.2508-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new option for specifying the quirk for delayed registration of
the certain device. A list of devices can be passed in a form
ID:IFACE,ID:IFACE,ID:IFACE,....
where ID is the 32bit hex number combo of vendor and device IDs and
IFACE is the interface number to trigger the register.
When a matching device is probed, the card registration is delayed
until the given interface is probed. It's needed for syncing the
registration until the last interface when multiple interfaces are
provided for the same card.
Link: https://lore.kernel.org/r/20200325103322.2508-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slight refactoring of the registration quirk code. Now it uses the
table lookup for easy additions in future. Also the return type was
changed to bool, and got a few more comments.
Link: https://lore.kernel.org/r/20200325103322.2508-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The signed 1 bit bitfields should be unsigned, so make them unsigned.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200325132913.110115-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: a40acc6bfc ("ASoC: Intel: bdw-rt5650: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: 4865bde187 ("ASoC: Intel: bdw-rt5677: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't correct and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Link to first message in conversation:
https://lkml.org/lkml/2020/3/18/54
Fixes: 64df6afa0d ("ASoC: Intel: broadwell: change cpu_dai and platform components for SOF")
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:
sound/soc/codecs/mt6660.c: 1:36 Invalid token: //
Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some .gitignore files have comments like "Generated files",
"Ignore generated files" at the header part, but they are
too obvious.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of the local macro wrappers for consistency.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131510.594671507@linutronix.de
Before the JZ4770, the playback and capture sampling rates had to match.
The JZ4770 supports independent sampling rates for both.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-6-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The change of offset for the {rx,tx}_threshold fields in the conf
register predates the JZ4780, and was first introduced in the JZ4760.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8974.c:200:38: warning:
wm8974_aux_boost_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/wm8974.c:204:38: warning:
wm8974_mic_boost_controls defined but not used [-Wunused-const-variable=]
commit 8a123ee2a4 ("ASoC: WM8974 DAPM cleanups")
left behind this, remove them.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200324070615.16248-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the tas2562 datasheet,the bits[5:1] represents the amp_level value.
So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi <charlie.jh@kakaocorp.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200319140043.GA6688@jhbirdchoi-MS-7B79
Signed-off-by: Mark Brown <broonie@kernel.org>
Hello,
This small series adds audio route for built-in microphone on NVIDIA Tegra
boards that use WM8903 CODEC. In particular this is needed in order to unmute
internal microphone on Acer A500 tablet device. I'm planning to send out the
device tree for the A500 for 5.8, so will be nice to get the microphone
sorted out. Please review and apply, thanks in advance.
Dmitry Osipenko (2):
dt-bindings: sound: tegra-wm8903: Document built-in microphone audio
source
ASoC: tegra: tegra_wm8903: Support DAPM events for built-in microphone
.../sound/nvidia,tegra-audio-wm8903.txt | 1 +
sound/soc/tegra/tegra_wm8903.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
--
2.25.1
The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:
sound/soc/codecs/mt6660.c: 1:36 Invalid token: //
Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200321114022.8545-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enable-GPIO needs to be toggled on a DAPM event in order to turn
microphone ON/OFF, otherwise microphone won't work.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A new small helper to get the current state of the device registration
for the given object. It'll be used for USB-audio driver to check the
delayed device registrations.
Link: https://lore.kernel.org/r/20200323170643.19181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now CPU/Codec DAIs are alias for dais.
Thus, we can directly use for_each_rtd_dais() macro
for soc_dai_pcm_new().
This patch merge CPU/Codec for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1xsolen.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgi8olet.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv2ooley.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9n4olf4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is currently categorizing CPU/Codec DAIs,
and it works well.
But modern devices require more complex connections,
for example Codec to Codec, etc, and future devices will
enable to more complex connections.
Because of these background, CPU/Codec DAIs categorizing is
no longer good much to modern device.
Currently, rtd has both CPU/Codec DAIs pointer.
rtd->cpu_dais = [][][][][][][][][]
rtd->codec_dais = [][][][][][][][][]
This patch merges these into DAIs pointer.
rtd->dais = [][][][][][][][][][][][][][][][][][]
^cpu_dais ^codec_dais
|--- num_cpus ---|--- num_codecs --|
Then, we can merge for_each_rtd_cpu/codec_dais() from this patch.
- for_each_rtd_cpu_dais() {
- ...
- }
- for_each_rtd_codec_dais() {
- ...
- }
+ for_each_rtd_dais() {
+ ...
+ }
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo7kolfa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I have a system which has an EVGA X99 Classified motherboard. The pin
assignments for the HD Audio controller are not correct under Linux.
Windows 10 works fine and informs me that it's using the Recon3Di
driver, and on Linux, `cat
/sys/class/sound/card0/device/subsystem_{vendor,device}` yields
0x3842
0x1038
This patch adds a corresponding entry to the quirk list.
Signed-off-by: Geoffrey Allott <geoffrey@allott.email>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a6cd56b678c00ce2db3685e4278919f2584f8244.camel@allott.email
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset corrects a rebind issue on STM32 SPDIFRX and I2S drivers.
The same correction has already been applied for SAI driver:
0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
The following problems have been seen on STM32 drivers.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify the driver, to change the call sequence as follows:
probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from the driver, to have the right sequence.
Olivier Moysan (3):
ASoC: stm32: spdifrx: fix regmap status check
ASoC: stm32: spdifrx: manage rebind issue
ASoC: stm32: i2s: manage rebind issue
sound/soc/stm/stm32_i2s.c | 40 ++++++++++++++++------
sound/soc/stm/stm32_spdifrx.c | 64 +++++++++++++++++++----------------
2 files changed, 63 insertions(+), 41 deletions(-)
--
2.17.1
Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.
In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.
Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.
Changes since v1:
- removed false error check while setting sruntime.
Srinivas Kandagatla (2):
ASoC: qcom: sdm845: handle soundwire stream
ASoC: codecs: wsa881x: remove soundwire stream handling
sound/soc/codecs/wsa881x.c | 44 +------------------------
sound/soc/qcom/Kconfig | 2 +-
sound/soc/qcom/sdm845.c | 67 ++++++++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 44 deletions(-)
--
2.21.0
In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There could be multiple instances of this codec on any platform,
so handling stream directly in this codec driver can lead to
multiple calls to prepare/enable/disable on the same SoundWire stream.
Move this stream handling to machine driver to fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200317151233.8763-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from I2S driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-4-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SPDFIRX driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cycle time of FIFO clock should increase 2 times to avoid
the random recording noise issue.
This setting could apply to all known situations in i2s mode.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073308.11572-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Qualcomm DSPs also supports the ALAC and APE decoders, so add support
for these and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-9-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect ALAC and APE configs to be send for decoders,
so add the API to program the respective config to the DSP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-8-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs also supports the wma decoder, so add support for wma
decoder and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-6-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma
decoders, so add the API to program the respective wma config to the DSP
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-5-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec profile is required to be passed for WMA codecs so that we know
the codec profile present and tell DSP accordingly, so update this API
to pass the codec profile as argument
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status. As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.
Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.
Reported-by: Andreas Steinmetz <ast@domdv.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a quirk that allows special processing and/or
skipping the call to snd_card_register.
For HyperX AMP, which uses two interfaces, but only has
a capture stream in the second, this allows the capture
stream to merge with the first PCM.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20200314165449.4086-3-crwulff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the USB interface of the mixer that the control
was created on instead of the default control interface.
This fixes the Kingston HyperX AMP (0951:16d8) which has
controls on two interfaces.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20200314165449.4086-2-crwulff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds Broadcom DSL/PON SoC audio driver
with Whistler I2S block. The SoC supported by this
patch are BCM63158B0,BCM63178 and BCM47622/6755
Signed-off-by: Kevin Li <kevin-ke.li@broadcom.com>
Link: https://lore.kernel.org/r/20200312223242.2843-2-kevin-ke.li@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've removed GFP_ATOMIC in all machine drivers and somehow this keeps
coming back due to copy-paste. Move to GFP_KERNEL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Maxim MAX98360A plug-and-play Class-D amplifier support on SSP1,
new card ID is sofda7219max98360a, name sof-da7219max98360a.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a clumsy structure member dereference in all machine drivers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variables, used as loop iterators, don't need to be initialised.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To help user-space with HDMI codec driver transition, both
a kernel module parameter and a kernel option were initially
provided to configure default behaviour of SOF on Intel hardware
with commit 139c7febad ("ASoC: SOF: Intel: add support for
snd-hda-codec-hdmi").
As hdac-hdmi is already now lagging in features compared to
snd-hda-codec-hdmi, move ahead with the transition and remove
the build option to select between the two, and instead default
to snd-hda-codec-hdmi if it is enabled in kernel build.
The old behaviour of using hdac-hdmi driver can still be forced
via the kernel module parameter.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make HDMI optional for APL and later platforms. If no HDMI codec
is found on the HDA bus, the graphics side driver is missing or
correct codec driver is not part of kernel build, codec_mask
reflects this and HDMI is disabled. The DSP topology will still
have the links for HDMI, so connect these to dummy codec to avoid
failures in topology loading.
This change also fixes a kernel oops that was triggered if
sof_pcm512x was used with SOF configured to use hdac-hdmi (can be
done via "use_common_hdmi=0" or by selecting
CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=n). This is not a supported
configuration.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having a reverse dependency to a config that has its own additional
dependencies, is generally not recommended. And this applies to
select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA
and SND_SOC_SOF_HDA are built as modules, but the machine driver is
built-in, leading to compile errors (reported as
i386-randconfig-e003-20200206).
Give up on trying to define different dependencies based on SOF/SST
selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This
fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI
may be built unnecessarily in some cases, but this seems like the lesser
evil.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having a reverse dependency to a config that has its own additional
dependencies, is generally not recommended. And this applies to
select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA
and SND_SOC_SOF_HDA are built as modules, but the machine driver is
built-in, leading to compile errors (reported as
i386-randconfig-e003-20200206).
Give up on trying to define different dependencies based on SOF/SST
selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This
fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI
may be built unnecessarily in some cases, but this seems like the lesser
evil.
Fixes: aa2b4a5 ('ASoC: Intel: boards: fix incorrect HDMI Kconfig dependency')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend code from single cpu-dai to multi-dai
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in
cl_dsp_init(), and it will never be received in the IRQ thread,
so the wait condition on this IPC will never be satisfied. The
wait before loading firmware is redundant and can be removed safely.
Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in
cl_dsp_init(), and as IPC IRQ is disabled at this stage, this
IPC will be never received in the IRQ thread. The function
hda_dsp_ipc_is_sof for filtering the ROM IPC can be removed
safely.
Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon <yang.jie@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This enum code, and what's more important, related structures is
unused in whole source code, so it shouldn't be kept.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_stream_valid() will check if the stream is valid by testing
stream->channels_min. So we do need the information in dai driver.
The stream name is not added since we want to sure
playback_widget/capture_widget will be created by topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_hdac_codec_modalias() truncates the string to the given size and
returns its size, but it returned a wrong size from snprintf().
snprintf() returns the would-be-output size, not the actual size.
Use scnprintf() instead to return the correct size.
Link: https://lore.kernel.org/r/20200313130241.8970-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show_pcm_class() returns obviously a short string that can't overflow
PAGE_SIZE. And even if it were to overflow, using snprintf() there is
just wrong, as it doesn't return the correct size.
So simplify with sprintf() instead.
Link: https://lore.kernel.org/r/20200313130223.8908-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position.
Use scnprintf() instead for fixing such potential errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_dbytes_create(), calls soc_tplg_init_kcontrol() to
perform additional driver specific initialization. While
soc_tplg_init_kcontrol() ensures that component is valid before invoking
ops->control_load, there is no such check at the end of
soc_tplg_dbytes_create() where list_add() is used.
Also in quite a few places, there is reference of tplg->comp->dapm or
tplg->comp->card, without any checks for tplg->comp.
In consequence of the above this may lead to referencing NULL pointer.
This allows for removal of now unnecessary checks.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200312122239.14489-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig. But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that. As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.
Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This makes DPCM runtime update functions available for external
calling. As an example, virtualised ASoC component drivers may need
to call these when managing shared DAPM routes that are used by more
than one driver (i.e. when host driver and guest drivers have a DAPM
path from guest PCM to host DAI where some parts are owned by host
driver and others by guest driver).
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312095214.15126-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently dpcm_prune_paths() has up to 4 nested condition and loop
levels, which forces the code to use flags for flow control.
Extracting widget status verification code from dpcm_prune_paths()
into a separate function simplifies the code.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312095214.15126-2-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
QDSP6 Frontend dais can be configured to work in rx or tx or both rx/tx mode,
however the default routing do not honour this DT configuration making sound
card fail to probe. FE dais are also not fully honouring device tree configuration.
Fix both of them.
Originally issue was reported by Vinod Koul
Srinivas Kandagatla (2):
ASoC: qdsp6: q6asm-dai: only enable dais from device tree
ASoC: qdsp6: q6routing: remove default routing
sound/soc/qcom/qdsp6/q6asm-dai.c | 30 +++++++++++++++++++++++-------
sound/soc/qcom/qdsp6/q6routing.c | 19 -------------------
2 files changed, 23 insertions(+), 26 deletions(-)
--
2.21.0
Field "substream" gets assigned during stream setup in
hda_dsp_pcm_hw_params() but it is never cleared afterwards during
cleanup procedure. Now, any non-pcm operation e.g.: compress can
mistakenly make use of that pointer as it's bypassing all
"if (s->substream)" checks.
Nulling the pointer during hw_free operation ensures no wild pointers
are left behind.
Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312120058.15057-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Frontend dais can be configured to rx or tx or both, however having default
routes without considering this configuration can lead to failures during
card probe as below for compress rx only case. These routing have to come
from sound card routing table in device tree.
"routing: ASoC: Failed to add route MM_UL1 -> direct -> MultiMedia1 Capture
msm-snd-sdm845 sound: ASoC: failed to instantiate card -19
"
Reported-by: Vinod Koul <vinod.koul@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code enables all the playback and capture dais even
if there is no device tree entry. This can lead to
un-necessary dais in the system which will never be used.
So honour whats specfied in device tree.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In this function, the variable 'dev' is assigned to '&pdev->dev',
but in the following code, all the assignments to 'struce device'
are used '&pdev->dev' instead of 'dev',except 'zx_tdm->dev'.
So,the variable 'dev' in this function is redundant and can be
replaced by '&pdev->dev' as elsewhere.
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200311144646.11292-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse reports a warning at tscm_hwdep_read_locked()
warning: context imbalance in tscm_hwdep_read_locked() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_locked()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-9-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse reports a warning at tscm_hwdep_read_queue()
warning: context imbalance in tscm_hwdep_read_queue() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_queue()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-8-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RT5682 can work in I2C or SoundWire mode, but the code will not
compile if I2C is not selected.
Reported-by: kbuild test robot <lkp@intel.com>
Pierre-Louis Bossart (3):
ASoC: rt5682: fix unmet dependencies
ASoC: rt5682: fix compilation issues without I2C
ASoC: rt5682-sdw: fix 'defined but not used' pm functions
sound/soc/codecs/Kconfig | 2 +-
sound/soc/codecs/rt5682-sdw.c | 4 ++--
sound/soc/codecs/rt5682.c | 10 ++++++++++
3 files changed, 13 insertions(+), 3 deletions(-)
--
2.20.1
This is re-applying the fix that went into 5.6 (commit 6c89ffea60)
as the changes were wiped out after merging the other code
refactoring. Basically the same changes, just replacing the
suspicious calls of snprintf() with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200310163625.10838-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Gcc reports the following warnings:
sound/soc/codecs/rt5682-sdw.c:286:12: warning: 'rt5682_dev_resume'
defined but not used [-Wunused-function]
static int rt5682_dev_resume(struct device *dev)
^~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5682-sdw.c:273:12: warning: 'rt5682_dev_suspend'
defined but not used [-Wunused-function]
static int rt5682_dev_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~
Fix by adding maybe_unused as done for other SoundWire codecs
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 code can be used in I2C or SoundWire mode. When I2C is not
selected, we have the following issue:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] &&
I2C [=n]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=m] && !UML && SND [=m] &&
SND_SOC [=m] && SOUNDWIRE [=m]
Fix by adding SOUNDWIRE as a dependency.
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each purge request is sent by driver after master core is powered up and
unresetted but before it is unstalled. On unstall, ROM begins processing
the request and initializing environment for FW load. Host should await
ROM's ack before moving forward. Without doing so, ROM init poll may
start too early and false timeouts can occur.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to unconditional initial timeouts, firmware may fail to load during
its initialization. This issue cannot be resolved on driver side as it
is caused by external sources such as CSME but has to be accounted for
nonetheless.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some configurations expose no NHLT table at all within their
/sys/firmware/acpi/tables. To prevent NULL-dereference errors from
occurring, adjust probe flow and append additional safety checks in
functions involved in NHLT lifecycle.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the recommendation set by hda_intel.c and enable HDMI/DP codec
wakeup during bus initialization procedure. Disable wakeup once init
completes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With _reset_link removed from the probe sequence, codec_mask at the time
skl_find_hda_machine() is invoked will always be 0, so hda machine will
never be chosen. Rather than reorganizing boot flow, be permissive about
invalid mask. codec_mask will be set to proper value during probe_work -
before skl_codec_create() ever gets called.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed
To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware API changes which introduced 'num_elems' param in several probe
structs such as sof_ipc_probe_dma_add_params also impacted getter for
both, DMA and probe points. All struct handlers except for
sof_ipc_probe_info_params have been updated. Align said handler too to
calculate payload size correctly.
Fixes: f3b433e469 ("ASoC: SOF: Implement Probe IPC API")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200309142124.29262-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_widgets() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1y2goga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_dapms() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgiigogf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.
Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.
Example with an HDaudio card with a bad topology:
[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19
with the disable_route_checks set:
[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes
Fixes: daa480bde6 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both snd_pcm_plug_client_size() and snd_pcm_plug_slave_size() do the
almost same calculations of calling src_frames() and dst_frames() in
the chain, but just to the different directions with each other.
This patch simplifies those functions. Now they return -EINVAL for
the invalid direction, but practically seen, there is no functional
changes at all.
Link: https://lore.kernel.org/r/20200309185855.15693-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of passing an enum as match data, and checking its value in the
probe to register one or the other dai, pass a pointer to a struct
i2s_soc_info, which contains all the information relative to one SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-4-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the code cleaner by using a "struct device *dev" variable instead
of dereferencing it everytime from within the struct platform_device.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM related settings for ACP registers in hw_params.
When TDM mode is enabled, Hw_params needs to read and write
from/to respective TX/RX (ACP_(I2S/BT)TDM_(TX/RX)FRMT) registers.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1583751029-2850-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination. Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly. This would lead to the
unexpected behavior as well.
This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.
The bug was reported by syzkaller.
Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com
Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each OSS PCM plugins allocate its internal buffer per pre-calculation
of the max buffer size through the chain of plugins (calling
src_frames and dst_frames callbacks). This works for most plugins,
but the rate plugin might behave incorrectly. The calculation in the
rate plugin involves with the fractional position, i.e. it may vary
depending on the input position. Since the buffer size
pre-calculation is always done with the offset zero, it may return a
shorter size than it might be; this may result in the out-of-bound
access as spotted by fuzzer.
This patch addresses those possible buffer overflow accesses by simply
setting the upper limit per the given buffer size for each plugin
before src_frames() and after dst_frames() calls.
Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com
Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5iebkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MR4B/wJq8zrpsPAA2jCoBfN0qMzrVBEt9QD
5oF/r36ZH5G6x0QZzyiwVOUbapNT1TVs51tw0S5esxJ+npkT2kgABPlIMYF2tgp6
rmLOaFEPC+Bgf/dNGIWLV21B+EZCHDxTz1zD7VjfaXLDPRop+sZg1VfXLR7IvXos
1VQLVx1y6vFJRr56EU5xQo1CAeFGB1x5K52aF4D90ALL7lYT6dt7m/soBmxImEpq
aZUCE6xwX8WMH4OX6sTfqOvB+g6q+DzshCP2+Fas/0OIQZQA9mmIKId+/xpb6QcY
A0AzMlSv49uAsBsa3CZmSingGVqL/PEMkCI4wvJPl/paQXUsMi9HYV0E
=YlPP
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.6-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.6
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
slimbus addresses are 16 bit wide, masking page numbers
to wcd register at offset of 12 will limit the number for pages.
So it becomes impossible to write to page 0x10 registers.
Remove masking 0x800 (slimbus address range) from register address
and making use of window parameters in regmap config should fix it
and also will represent the registers exactly inline with Datasheet.
Remove this unnessary masking and make the registers be inline
with datasheet.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These are v2 resend of soc-pcm cleanup step5.
1) - 4) are rebased to latest for-5.7 branch.
5) - 6) are remaked of previous [6/8], [7/8] which were mistaken patch.
Kuninori Morimoto (6):
1) ASoC: soc-pcm: move dpcm_fe_dai_close()
2) ASoC: soc-pcm: add dpcm_fe_dai_cleanup()
3) ASoC: soc-pcm: use snd_soc_dai_get_pcm_stream() at dpcm_set_fe_runtime()
4) ASoC: soc-pcm: tidyup dulicate handing at dpcm_fe_dai_startup()
5) ASoC: soc-pcm: check DAI's activity more simply
6) ASoC: soc-pcm: Do Digital Mute for both CPU/Codec in same timing.
sound/soc/soc-pcm.c | 97 ++++++++++++++++++++++-----------------------
1 file changed, 47 insertions(+), 50 deletions(-)
--
2.17.1
We are currently using simple-audio-card on the Allwinner A64 SoC.
The digital audio codec there (sun8i-codec) has 3 AIFs, one each for the
CPU, the modem, and Bluetooth. Adding support for the secondary AIFs
requires adding codec2codec DAI links.
Since the modem and bt-sco codec DAI drivers only have one set of
possible PCM parameters (namely, 8kHz mono S16LE), there's no real
need for a machine driver to specify the DAI link configuration. The
parameters for these "simple" DAI links can be chosen automatically.
This series adds codec2codec DAI link support to simple-audio-card.
Codec to codec links are automatically detected when all DAIs in the
link belong to codec components.
I tried to reuse as much code as possible, so the first two patches
refactor a couple of helper functions to be more generic.
The last patch adds the new feature and its documentation.
Changes in v4:
- Rebased on top of asoc/for-next, several changes to patch 2
- Removed unused variable from patch 3
Changes in v3:
- Update use of for_each_rtd_components for v5.6
Changes in v2:
- Drop patch 1 as it was merged
- Automatically detect codec2codec links instead of using a DT property
Samuel Holland (3):
ALSA: pcm: Add a standalone version of snd_pcm_limit_hw_rates
ASoC: pcm: Export parameter intersection logic
ASoC: simple-card: Add support for codec2codec DAI links
Documentation/sound/soc/codec-to-codec.rst | 9 +++-
include/sound/pcm.h | 9 +++-
include/sound/soc.h | 3 ++
sound/core/pcm_misc.c | 18 +++----
sound/soc/generic/simple-card-utils.c | 48 ++++++++++++++++++
sound/soc/soc-pcm.c | 59 ++++++++++++++--------
6 files changed, 114 insertions(+), 32 deletions(-)
--
2.24.1
The runtime pointer has been taken in functional level so there is no need
to take it again under the if () case.
Fixes: 9d789dc047 ("ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200227093544.27723-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KBUILD_MODNAME is available to name kernel modules according to its object
name. This commit uses the macro instead of string for name field of
struct driver since drivers in ALSA firewire stack have the same name of
each object name.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200306135229.11659-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Digital Mute for CPU is done at soc_pcm_close(), and
Digital Mute for Codec is done at soc_pcm_hw_free().
It is just confusable.
This patch do Digital Mute for both CPU/Codec in same timing.
Then, it cares DAI activity
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imjip9ty.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_free() want to call snd_soc_dai_digital_mute()
if it was last user of Playback or Capture.
bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
int playback_active = dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK];
int capture_active = dai->stream_active[SNDRV_PCM_STREAM_CAPTURE];
if ((playback && playback_active == 1) ||
(!playback && capture_active == 1))
snd_soc_dai_digital_mute(...)
But it is same as
int active = dai->stream_active[substream->stream];
if (active == 1)
snd_soc_dai_digital_mute(...)
This patch simplify the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k13yp9ub.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
error handling at dpcm_fe_dai_startup() has duplicate code.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfoep9ug.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We already have snd_soc_dai_get_pcm_stream(),
let's use it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu8up9ul.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_fe_dai_close() and error case of dpcm_fe_dai_open()
need to do same cleanup operation.
To avoid duplicate code, this patch adds dpcm_fe_dai_cleanup()
and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8tap9uq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
move dpcm_fe_dai_close() next to dpcm_fe_dai_open().
This is prepare for dpcm_fe_dai_open() cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pndqp9uv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following the example in cb2cf0de11 ("ASoC: soc-core: care Codec <->
Codec case by non_legacy_dai_naming"), determine if a DAI link contains
only codec DAIs by examining the non_legacy_dai_naming flag in each
DAI's component.
For now, we assume there is only one or a small set of valid PCM stream
parameters, so num_params == 1 is good enough. We also assume that the
same params are valid for all supported streams. params is set to the
subset of parameters common among all DAIs, and then the existing code
automatically chooses the highest quality of the remaining values when
the link is brought up.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200305051143.60691-4-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The logic to calculate the subset of stream parameters supported by all
DAIs associated with a PCM stream is nontrivial. Export a helper
function so it can be used to set up simple codec2codec DAI links.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20200305051143.60691-3-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It can be useful to derive min/max rates of a snd_pcm_hardware without
having a snd_pcm_runtime, such as before constructing an ASoC DAI link.
Create a new helper that takes a pointer to a snd_pcm_hardware directly,
and refactor the original function as a wrapper around it, to avoid
needing to update any call sites.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200305051143.60691-2-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Looks like there are some unused headers, remove them.
Seems to be missed while moving to mfd.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306132806.19684-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ee88f4ebe5 ("ALSA: mips: Use managed buffer allocation") removed
superfluous hw_params/hw_free callbacks, but forgot to remove them where
they were used.
Fixes: ee88f4ebe5 ("ALSA: mips: Use managed buffer allocation")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20200306105837.31523-1-tsbogend@alpha.franken.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct s1810c_state_packet contains the array in the first field
hence zero-initialization requires a more couple of braces. Fix the
compile warning pointing it out:
sound/usb/mixer_s1810c.c: In function 'snd_sc1810c_get_status_field':
sound/usb/mixer_s1810c.c:178:9: warning: missing braces around initializer [-Wmissing-braces]
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: 8dc5efe3d1 ("ALSA: usb-audio: Add support for Presonus Studio 1810c")
Link: https://lore.kernel.org/r/202002210251.WgMfvKJP%lkp@intel.com
Link: https://lore.kernel.org/r/20200306081231.7940-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MicroBook IIc operates in UAC2 mode by default. This patch addresses
several issues with it:
- MicroBook II and IIc shares the same USB ID. We can distinguish them
by interface class.
- MaxPacketsOnly attribute is erroneously set in endpoint descriptors.
As a result this card produces noise with all sample rates other than
96 KHz. This also causes issues like IOMMU page faults and other
problems with host controller.
- Sample rate changes takes more than 2 seconds for this device. Clock
validity request returns false during that period, so the clock validity
quirk is required.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix gcc warnings when -Wextra is used by using an empty do-while
block instead of <nothing>. Fixes these build warnings:
../sound/pci/korg1212/korg1212.c:674:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:708:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:730:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:853:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1013:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1035:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1052:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1066:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1087:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1094:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:1208:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../sound/pci/korg1212/korg1212.c:2360:102: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/91fb1e97-a773-5790-3f65-8198403341e1@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A headset on the laptop like ASUS B9450FA does not work, until quirk
ALC294_FIXUP_ASUS_HPE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200225072920.109199-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell desktop platform supported headset Mic.
Add pin verb to enable headset Mic.
This platform only support fixed type headset for Iphone type.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b9da28d772ef43088791b0f3675929e7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dpcm_add_paths() checks returned be from dpcm_get_be()
static int dpcm_add_paths(...)
{
...
for_each_dapm_widgets(list, i, widget) {
...
be = dpcm_get_be(...);
...
/* make sure BE is a real BE */
=> if (!be->dai_link->no_pcm)
continue;
...
}
...
}
But, dpcm_get_be() itself is checking it already.
dpcm_get_be(...)
{
...
for_each_card_rtds(card, be) {
=> if (!be->dai_link->no_pcm)
continue;
...
if (...)
=> return be;
}
return NULL
}
This patch removes duplicate check
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfoo7q1j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Many functions defines "stream = substream->stream", but
some of them is using "substream->stream" instead of "stream".
It is pointless. This patch uses defined stream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu947q1t.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the config to 'tristate' for MCDT driver to allow it to build into
modules, as well as changing to use IS_ENABLED() to validate if need supply
dummy functions when building the MCDT driver as a module.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/9306f2b99641136653ae4fe6cf9e859b7f698f77.1583387748.git.baolin.wang7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the range verification check for the mic_bias and vref device tree
entries.
Fixes 37bde5acf040 ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200304193427.16886-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use new helper pci_status_get_and_clear_errors() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc 7.4.0 build fails:
In file included from sound/soc/amd/acp3x-rt5682-max9836.c:20:0:
sound/soc/amd/raven/acp3x.h: In function rv_readl:
sound/soc/amd/raven/acp3x.h:113:9: error: implicit declaration of function readl; did you mean rv_readl? [-Werror=implicit-function-declaration]
return readl(base_addr - ACP3x_PHY_BASE_ADDRESS);
^~~~~
rv_readl
sound/soc/amd/raven/acp3x.h: In function rv_writel:
sound/soc/amd/raven/acp3x.h:118:2: error: implicit declaration of function writel; did you mean rv_writel? [-Werror=implicit-function-declaration]
writel(val, base_addr - ACP3x_PHY_BASE_ADDRESS);
^~~~~~
rv_writel
Add <linux/io.h> to fix this.
Fixes: 6b8e4e7db3 ("ASoC: amd: Add machine driver for Raven based platform")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Message-Id: <20200304084057.44764-1-yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes:
>> sound/soc//amd/acp3x-rt5682-max9836.c:341:23: warning: format '%d'
>> expects argument of type 'int', but argument 3 has type 'long int'
>> [-Wformat=]
dev_err(&pdev->dev, "DMIC gpio failed err=%d\n",
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200303090444.95805-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If SND_SOC_AMD_RV_RT5682_MACH=y, below kconfig and build errors can be seen:
WARNING: unmet direct dependencies detected for SND_SOC_CROS_EC_CODEC
WARNING: unmet direct dependencies detected for I2C_CROS_EC_TUNNEL
ld: drivers/i2c/busses/i2c-cros-ec-tunnel.o: in function `ec_i2c_xfer':
i2c-cros-ec-tunnel.c:(.text+0x2fc): undefined reference to `cros_ec_cmd_xfer_status'
ld: sound/soc/codecs/cros_ec_codec.o: in function `wov_host_event':
cros_ec_codec.c:(.text+0x4fb): undefined reference to `cros_ec_get_host_event'
ld: sound/soc/codecs/cros_ec_codec.o: in function `send_ec_host_command':
cros_ec_codec.c:(.text+0x831): undefined reference to `cros_ec_cmd_xfer_status'
This is because it will select SND_SOC_CROS_EC_CODEC and I2c_CROS_EC_TUNNEL but
both depends on CROS_EC.
Fixes: 6b8e4e7db3 ("ASoC: amd: Add machine driver for Raven based platform")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200303110514.3267126-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We're passing "&posn" instead of "posn" so it ends up corrupting
memory instead of doing something useful.
Fixes: 53e0c72d98 ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200303101858.ytehbrivocyp3cnf@kili.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver should set ops in rt1015_dai driver.
Also make the two variable static to fix sparse warnings.
Fixes: df31007400 ("ASoC: rt1015: add rt1015 amplifier driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200302070522.48104-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch between DMIC0 and DMIC1 based on recording device selected.
This is done by toggling the dmic select gpio.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200302082443.51587-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the calls to hda_dsp_set_power_state() with the
top-level SOF op snd_sof_set_power_state().
Along with this, modify the hda_dsp_resume() function to return
the value of snd_sof_set_power_state() directly.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200228234225.6963-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set DONE bit after the FW_PURGE IPC is polled successfully, to clear the
interrupt and avoid the arrival of the confusing unexpected ipc.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In tx_wait_done the ipc payload is copied before the DSP transaction
error code is checked. This might lead to corrupted data in kernel side
even though the error would be handled later. It is also pointless to
copy the data in case of error. So change the order of error check and
copy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As discussion in ALSA https://patchwork.kernel.org/patch/11336023/, it
is suggested to skip DMA buffer pre-allocation with passing size=0 when
calling snd_pcm_set_managed_buffer(), to make the full buffer_bytes
range configured in topology file selectable from user space, here do
the corresponding change in SOF PCM driver to implement it.
This change doesn't have dependency to the change that Takashi will do
in the ALSA core by adding total_pcm_alloc_bytes limitation to the
struct snd_card, it passes tests both with or without Takashi's coming
change on SOF CML platform.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Link: https://lore.kernel.org/r/20200228231850.9226-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_dapm_stream_event() is using for_each_rtd_cpu_dais().
It should use "cpu_dai", instead of "rtd->cpu_dai".
This patch fixup it.
Fixes: commit de6214a336 ("ASoC: Add multiple CPU DAI support in DAPM")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pne07qeh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't confuse user with meaningless warning about the failure in getting
resources and registering card in case of deferred probe.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200228101120.28819-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warning:
sound/soc/codecs/rt5682-sdw.c:163:5: warning:
symbol 'rt5682_clock_config' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200228075609.38236-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 1e5ddb6ba7 ("ASoC: component: Add sync_stop PCM ops")
added snd_soc_pcm_component_sync_stop(), but it is checking
ioctrl instead of sync_stop. This is bug.
This patch fixup it.
Fixes: commit 1e5ddb6ba7 ("ASoC: component: Add sync_stop PCM ops")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8736av7a8c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit c2caa4da46 ("ASoC: Fix widget powerdown on shutdown") added a
set of the power state during snd_soc_dapm_shutdown to ensure the
widgets powered off. However, when commit 39eb5fd13d
("ASoC: dapm: Delay w->power update until the changes are written")
added the new_power member of the widget structure, to differentiate
between the current power state and the target power state, it did not
update the shutdown to use the new_power member.
As new_power has not updated it will be left in the state set by the
last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence
for the shutdown proceeds it will turn the widgets on (despite them
already being on) rather than turning them off.
Fixes: 39eb5fd13d ("ASoC: dapm: Delay w->power update until the changes are written")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
As discussed in [1], ASoC core supports multi codec DAIs
on a DAI link. However it does not do so for CPU DAIs.
So, add support for multi CPU DAIs on a DAI Link by adding
multi CPU DAI in Card instantiation, suspend and resume
functions, PCM ops, stream handling functions and DAPM.
[1]: https://www.spinics.net/lists/alsa-devel/msg71369.html
changes in v5:
- rebase to latest kernel base
Bard Liao (2):
ASoC: Return error if the function does not support multi-cpu
ASoC: pcm: check if cpu-dai supports a given stream
Shreyas NC (4):
ASoC: Add initial support for multiple CPU DAIs
ASoC: Add multiple CPU DAI support for PCM ops
ASoC: Add dapm_add_valid_dai_widget helper
ASoC: Add multiple CPU DAI support in DAPM
include/sound/soc.h | 15 +
sound/soc/soc-compress.c | 5 +-
sound/soc/soc-core.c | 168 +++++-----
sound/soc/soc-dapm.c | 133 ++++----
sound/soc/soc-generic-dmaengine-pcm.c | 18 +
sound/soc/soc-pcm.c | 463 ++++++++++++++++++--------
6 files changed, 531 insertions(+), 271 deletions(-)
--
2.17.1
The TAS2563 is register compatible with the TAS2562. The main
difference is the TAS2563 has a programmable DSP to manage different
audio profiles.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200226130305.12043-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP_PME_EN allows wake interrupt to be generated when I2S wake
feature is enabled. On turning ACP On, ACP_PME_EN gets cleared.
Setting the bit back ensures that wake event can be received
when ACP is On.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200226104746.208656-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now multi-cpu-dais are supported, we can skip cpi-dais which don't
support the current stream, following the example of multi-codec-dais.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Multi cpu is not supported by all functions yet. Add an error message
and return.
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM handles DAIs during soc_dapm_stream_event() and during addition
and creation of DAI widgets i.e., dapm_add_valid_dai_widget() and
dapm_connect_dai_link_widgets().
Extend these functions to handle multiple cpu dai.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200225133917.21314-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding a helper to connect widget for a specific cpu and codec dai
The helper will help dapm_connect_dai_link_widgets() to reduce indents.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200225133917.21314-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support in PCM operations to invoke multiple cpu dais as we do
for multiple codec dais. Also the symmetry calculations are updated to
reflect multiple cpu dais.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200225133917.21314-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC core supports multiple codec DAIs but supports only a CPU DAI.
To support multiple cpu DAIs, add cpu_dai and num_cpu_dai in
snd_soc_dai_link and snd_soc_pcm_runtime structures similar to
support for codec_dai. This is intended as a preparatory patch to
eventually support the unification of the Codec and CPU DAI.
Inline with multiple codec DAI approach, add support to allocate,
init, bind and probe multiple cpu_dai on init if driver specifies
that. Also add support to loop over multiple cpu_dai during
suspend and resume.
This is intended as a preparatory patch to eventually unify the CPU
and Codec DAI into DAI components.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Link: https://lore.kernel.org/r/20200225133917.21314-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The check on p->sink looks bogus, I believe it should be p->source
since the following code blocks are related to p->source. Fix
this by replacing p->sink with p->source.
Fixes: 24c8d14192 ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Copy-paste error")
Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC component open/close and snd_soc_component_module_get/put are called
independently for each component-substream pair, so the logic added in
commit dd03907bf1 ("ASoC: soc-pcm: call snd_soc_component_open/close()
once") was not sufficient and led to PCM playback and module unload errors.
Implement handling of failures directly in soc_pcm_components_open(),
so that any successfully opened components are closed upon error with
other components. This allows to clean up error handling in
soc_pcm_open() without adding more state tracking.
Fixes: dd03907bf1 ("ASoC: soc-pcm: call snd_soc_component_open/close() once")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200220094955.16968-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has implementation which depends on CONFIG_DEBUG_FS.
But, we don't want to have random #ifdef.
This patch adds dpcm_create/remove_debugfs_state() and care it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e0jjc9b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_path_put() (A) is calling kfree(*list).
The freed list is created by dapm_widget_list_create() (B) which is called
from snd_soc_dapm_dai_get_connected_widgets() (C) which is called from
dpcm_path_get() (D).
(B) dapm_widget_list_create(**list, ...)
{
...
=> *list = kzalloc();
...
}
(C) snd_soc_dapm_dai_get_connected_widgets(..., **list, ...)
{
...
dapm_widget_list_create(list, ...);
...
}
(D) dpcm_path_get(..., **list)
{
...
snd_soc_dapm_dai_get_connected_widgets(..., list, ...);
...
}
(A) dpcm_path_put(**list)
{
=> kfree(*list);
}
This kind of unbalance code is very difficult to read/understand.
To avoid this issue, this patch adds each missing paired function
dapm_widget_list_free() for dapm_widget_list_create() (B), and
snd_soc_dapm_dai_free_widgets() for snd_soc_dapm_dai_get_connected_widgets() (C).
This patch uses these, and moves dpcm_path_put() next to dpcm_path_get().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a75fjc9q.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm has dpcm_run_new/old_update(), but these are used from
dpcm_fe_runtime_update() only, and are very verbose functions.
This patch disassembles these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blpvjc9v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-pcm.c has dai_get_widget(), but it can be more generic.
This patch renames it to snd_soc_dai_get_widget(), and use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87d0abjca1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_apply_msb() apply msb for CPU/Codec,
but, it has duplicate code. The difference is only
SNDRV_PCM_STREAM_PLAYBACK and SNDRV_PCM_STEAM_CAPTURE.
It is very verbose and duplicate code.
This patch simplify code by using snd_soc_dai_get_pcm_stream().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeurjca6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAI driver has playback/capture stream.
OTOH, we have SNDRV_PCM_STREAM_PLAYBACK/CAPTURE.
Because of this kind of implementation,
ALSA SoC needs to have many verbose code.
To solve this issue, this patch adds snd_soc_dai_get_pcm_stream() macro
to get playback/capture stream pointer from stream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftf7jcab.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Incrementation of avail_clk_cnt was incorrectly moved to error path. Put
it back to success path.
Fixes: 6ee927f2f0 ('ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk dev')
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200224125202.13784-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit b0edff4236 ("ASoC: soc-pcm/soc-compress: use
snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP")
uses snd_soc_dapm_stream_stop() for soc_compr_free_fe()
and dpcm_fe_dai_shutdown() because it didn't care about pmdown_time.
But, it didn't need to care.
This patch rollback to original code.
Some system will wait unneeded timed-out without this patch.
Special Thanks for reporting to Chris Gorman.
...
intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3
intel_sst_acpi 808622A8:00: fw returned err -16
sst-mfld-platform sst-mfld-platform: ASoC: PRE_PMD: pcm0_in event failed: -16
...
Fixes: commit b0edff4236 ("ASoC: soc-pcm/soc-compress: use snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP")
Reported-by: Chris Gorman <chrisjohgorman@gmail.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfowspeb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/meson/aiu-encoder-i2s.c:129:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 3e25c44598 ("ASoC: meson: aiu: add support for the Meson8 and Meson8b SoC families")
Signed-off-by: kbuild test robot <lkp@intel.com>
CC: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200222170154.GA119396@e50d7db646c3
Signed-off-by: Mark Brown <broonie@kernel.org>
On i386 randconfig:
sound/soc/codecs/wm9705.o: In function `wm9705_soc_resume':
wm9705.c:(.text+0x128): undefined reference to `snd_ac97_reset'
sound/soc/codecs/wm9712.o: In function `wm9712_soc_resume':
wm9712.c:(.text+0x2d1): undefined reference to `snd_ac97_reset'
sound/soc/codecs/wm9713.o: In function `wm9713_soc_resume':
wm9713.c:(.text+0x820): undefined reference to `snd_ac97_reset'
Fix this by adding the missing dependencies on SND_SOC_AC97_BUS.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200224112537.14483-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add decimation filter selection support.
Per Section 8.3.6.7 the Digital Decimation Filter is selectable between
a Linear Phase, Low Latency, and Ultra Low Latency filer.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221181358.22526-2-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320ADCx140 parts support Dynamic Range Enhancer (DRE) as defined
in Section 8.3.2 of the data sheets.
The DRE achieves a complete-channel dynamic range as high as 120 dB.
At a system level, the DRE scheme enables far-field, high-fidelity recording
of audio signals in very quiet environments and low-distortion recording in
loud environments.
There are 2 enables for DRE. The first is a global setting that enables
the DRE engine in the device and the other enable is per channel. If
the DRE is enabled globally then either DRE or AGC can be used per each
configured channel. If global DRE is disabled then even setting the DRE
enable bit in the channel config register will have no effect.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221181358.22526-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure the axg audio card driver recognise the dai_link as a
codec-to-codec link if the cpu dai is the internal dac glue.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200221153607.1585499-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the internal audio DAC glue found on the Amlogic g12a
and sm1 SoC families. This allows to connect the TDM outputs of the SoC
to the internal t9015 audio DAC.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200221153607.1585499-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for digital volume control. There is no dedicated register
for volume control but instead there are 4. The values of the registers
are determined with exponential floating point math.
So a table was created with register values for 2dB step increments
from -110dB to 0dB.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200221124151.8774-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is not used anywhere in the driver, so remove it.
Fixes: 36c684936f ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200217064250.15516-5-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The AIU audio controller on the Meson8 and Meson8b SoC families is
compatible with the one found in the later GXBB family. Add compatible
strings for these two older SoC families so the driver can be loaded for
them.
Instead of using the I2S divider from the AIU_CLK_CTRL_MORE register we
need to use the I2S divider from the AIU_CLK_CTRL register. This older
register is less flexible because it only supports four divider settings
(1, 2, 4, 8) compared to the AIU_CLK_CTRL_MORE register (which supports
dividers in the range 0..64).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200220205711.77953-4-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a struct aiu_platform_data to make the driver aware of
platform specific information. Convert the existing check for the
internal stereo audio codec (only available on GXL) to this new struct.
Support for the 32-bit SoCs will need this as well because the
AIU_CLK_CTRL_MORE register doesn't have the I2S divider bits (and we
need to use the I2S divider from AIU_CLK_CTRL instead).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200220205711.77953-3-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the tlv320adcx140 codec driver family.
The TLV320ADCx140 is a Burr-Brown™ highperformance, audio analog-to-digital
converter (ADC) that supports simultaneous sampling of up to four analog
channels or eight digital channels for the pulse density modulation (PDM)
microphone input. The device supports line and microphone inputs, and
allows for both single-ended and differential input configurations.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200220210759.31466-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we get a clock error during probe we have to call
regulator_bulk_disable before bailing out, otherwise we trigger
a warning in regulator_put.
Fix this by using "goto err" like in the error cases above.
Fixes: 5a3af12931 ("ASoC: pcm512x: Add PCM512x driver")
Signed-off-by: Matthias Reichl <hias@horus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to configure the HDA controller with an external HDA
codec even if iDisp codec in i915 is not available.
This can happen for multiple reasons:
- internal graphics is disabled on the system
- i915 driver is not enabled in kernel or it fails to init
- i915 codec reports error in HDA codec probe
- HDA codec driver probe fails
Address all these scenarios, but keep using the existing topology.
In case failures occur, HDMI PCM nodes are created, but they will
report error if application tries to use them. No ALSA mixer controls
are created. If the external HDA codec init fails as well, SOF probe
will return error as before.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206085
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1163677
BugLink: https://github.com/thesofproject/linux/issues/1658
Link: https://lore.kernel.org/r/20200220171028.22023-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently it is possible to get the following bad config:
WARNING: unmet direct dependencies detected for SND_SOC_WM5110
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && MFD_WM5110 [=n]
commit ea00d95200 ("ASoC: Use imply for SND_SOC_ALL_CODECS")
commit d8dd3f92a6 ("ASoC: Fix SND_SOC_ALL_CODECS imply misc fallout")
After these two patches the machine drivers still selects the
SND_SOC_WM5110 symbol which doesn't take account of the dependency
added on the MFD_WM5110 symbol, fix this by also adding a dependency on
MFD_WM5110 itself.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200220125654.7064-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that dpcm_get_be() is used in dpcm_end_walk_at_be(), it is not a error
if this function does not find a BE for the provided widget. Remove the
related dev_err() trace which is confusing since things might be working
as expected.
When called from dpcm_add_paths(), it is an error if dpcm_get_be() fails to
find a BE for the provided widget. The necessary error trace is already
done in this case.
Fixes: 027a483871 ("ASoC: soc-pcm: use dpcm_get_be() at dpcm_end_walk_at_be()")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200219115048.934678-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of ABI version mismatch, _manifest needs to be freed as
it is just a copy of the original topology manifest. However, if
a driver manifest handler is defined, that would get executed and
the cleanup is never reached. Fix that by getting the return status
of manifest() instead of returning directly.
Fixes: 583958fa2e ("ASoC: topology: Make manifest backward compatible from ABI v4")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If soc_tplg_link_config() fails, _link needs to be freed in case of
topology ABI version mismatch. However the current code is returning
directly and ends up leaking memory in this case.
This patch fixes that.
Fixes: 593d9e52f9 ("ASoC: topology: Add support to configure existing physical DAI links")
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Link: https://lore.kernel.org/r/20200207185325.22320-2-dragos_tarcatu@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RK3328 reference design uses an external line driver IC as a buffer
on the analog codec output, enabled by the GPIO_MUTE pin, and such a
configuration is currently assumed in the codec driver's direct poking
of GRF_SOC_CON10 to control the GPIO_MUTE output value. However, some
boards wire up analog audio yet use that pin for some other purpose, so
that assumption doesn't always hold. Update this functionality to rely
on an explicit GPIO descriptor, such that it can be managed at the
board level.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5bc383ed1832f0f5d1dcb3c97ad92fd68e5217e3.1581376744.git.robin.murphy@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add additional support for ISENSE and VSENSE feature for the TAS2562.
This feature monitors the output to the loud speaker attempts to
eliminate IR drop errors due to packaging.
This feature is defined in Section 8.4.5 IV Sense of the data sheet.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200219134622.22066-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit b2354e4009.
This change might have been desirable to ensure the uniqueness of
the component name. It would have helped to better support linux
devices which register multiple components, something is which more
common than initially thought.
However, some card driver are directly using dev_name() to fill the
component names of the dai_link which is a problem if want to change
the way ASoC generates the component names.
Until we figure out the appropriate way to deal with this, revert the
change and keep the names as they were. There might be a couple of warning
related to debugfs (which were already present before the change) but it
is still better than breaking working audio cards.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200219102526.692126-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_show_state() invokes multiple snprintf() calls to concatenate
formatted strings on the fixed size buffer. The usage of snprintf()
is supposed for avoiding the buffer overflow, but it doesn't work as
expected because snprintf() doesn't return the actual output size but
the size to be written.
Fix this bug by replacing all snprintf() calls with scnprintf()
calls.
Fixes: f86dcef87b ("ASoC: dpcm: Add debugFS support for DPCM")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The debugfs output of intel skl driver writes strings with multiple
snprintf() calls with the fixed size. This was supposed to avoid the
buffer overflow but actually it still would, because snprintf()
returns the expected size to be output, not the actual output size.
Fix it by replacing snprintf() calls with scnprintf().
Fixes: d14700a01f ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
skl_print_pins() loops over all given pins but it overwrites the text
at the very same position while increasing the returned length.
Fix this to show the all pin contents properly.
Fixes: d14700a01f ("ASoC: Intel: Skylake: Debugfs facility to dump module config")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Need to chain the THINKPAD_ACPI, otherwise the mute led will not
work.
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200219052306.24935-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>