Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.
Fixes: 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9de52a755c ("arm64: fpsimd: Fix failure to restore FPSIMD
state after signals") fixed an issue reported in our FPSIMD signal
restore code but inadvertently introduced another issue which tends to
manifest as random SEGVs in userspace.
The problem is that when we copy the struct fpsimd_state from the kernel
stack (populated from the signal frame) into the struct held in the
current thread_struct, we blindly copy uninitialised stack into the
"cpu" field, which means that context-switching of the FP registers is
no longer reliable.
This patch fixes the problem by copying only the user_fpsimd member of
struct fpsimd_state. We should really rework the function prototypes
to take struct user_fpsimd_state * instead, but let's just get this
fixed for now.
Cc: Dave Martin <Dave.Martin@arm.com>
Fixes: 9de52a755c ("arm64: fpsimd: Fix failure to restore FPSIMD state after signals")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
- Initialize the fragment headers, by Sven Eckelmann
- Fix a NULL check in BATMAN V, by Sven Eckelmann
- Fix kernel doc for the time_setup() change, by Sven Eckelmann
- Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=US7g
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20171215' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Initialize the fragment headers, by Sven Eckelmann
- Fix a NULL check in BATMAN V, by Sven Eckelmann
- Fix kernel doc for the time_setup() change, by Sven Eckelmann
- Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Learning is currently enabled for ports which are OVS slaves -
even though OVS doesn't need this indication.
Since we're not associating a fid with the port, HW would continuously
notify driver of learned [& aged] MACs which would be logged as errors.
Fixes: 2b94e58df5 ("mlxsw: spectrum: Allow ports to work under OVS master")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Two kernel headers got modified recently, which are used by tooling as well:
tools/include/uapi/linux/kvm.h
arch/x86/include/asm/cpufeatures.h
None of those changes have an effect on tooling, so do a plain copy.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Note that there are cleanups queued up for v4.16 that will make this
warning more informative and will make the syncing easier as well.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Update x86-opcode-map.txt based on the October 2017 Intel SDM publication.
Fix INVPID to INVVPID.
Add UD0 and UD1 instruction opcodes.
Also sync the objtool and perf tooling copies of this file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My previous attempt to fix a couple of bugs in __restore_processor_context():
5b06bbcfc2 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
... introduced yet another bug, breaking suspend-resume.
Rather than trying to come up with a minimal fix, let's try to clean it up
for real. This patch fixes quite a few things:
- The old code saved a nonsensical subset of segment registers.
The only registers that need to be saved are those that contain
userspace state or those that can't be trivially restored without
percpu access working. (On x86_32, we can restore percpu access
by writing __KERNEL_PERCPU to %fs. On x86_64, it's easier to
save and restore the kernel's GSBASE.) With this patch, we
restore hardcoded values to the kernel state where applicable and
explicitly restore the user state after fixing all the descriptor
tables.
- We used to use an unholy mix of inline asm and C helpers for
segment register access. Let's get rid of the inline asm.
This fixes the reported s2ram hangs and make the code all around
more logical.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Fixes: 5b06bbcfc2 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
Link: http://lkml.kernel.org/r/398ee68e5c0f766425a7b746becfc810840770ff.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86_64 restores system call MSRs in fix_processor_context(), and
x86_32 restored them along with segment registers. The 64-bit
variant makes more sense, so move the 32-bit code to match the
64-bit code.
No side effects are expected to runtime behavior.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/65158f8d7ee64dd6bbc6c1c83b3b34aaa854e3ae.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
x86_64's saved_context nonsensically used separate idt_limit and
idt_base fields and then cast &idt_limit to struct desc_ptr *.
This was correct (with -fno-strict-aliasing), but it's confusing,
served no purpose, and required #ifdeffery. Simplify this by
using struct desc_ptr directly.
No change in functionality.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/967909ce38d341b01d45eff53e278e2728a3a93a.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.
To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.
In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This fixes an issue in two recent commits that may cause
pm_runtime_enable() to be called for too many times for some
devices during the "thaw" transition belonging to hibernation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0D8g
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes an issue in two recent commits that may cause
pm_runtime_enable() to be called for too many times for some devices
during the "thaw" transition belonging to hibernation"
* tag 'pm-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()
- Comment fixes
- Build fix
- Better memory alloction (don't use NR_CPUS)
- Configuration fix
- Build warning fix
- Enhanced callback parameter (to simplify users of trace hooks)
- Give up on stack tracing when RCU isn't watching (it's a lost cause)
-----BEGIN PGP SIGNATURE-----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=WdMQ
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fix-ups:
- comment fixes
- build fix
- better memory alloction (don't use NR_CPUS)
- configuration fix
- build warning fix
- enhanced callback parameter (to simplify users of trace hooks)
- give up on stack tracing when RCU isn't watching (it's a lost
cause)"
* tag 'trace-v4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have stack trace not record if RCU is not watching
tracing: Pass export pointer as argument to ->write()
ring-buffer: Remove unused function __rb_data_page_index()
tracing: make PREEMPTIRQ_EVENTS depend on TRACING
tracing: Allocate mask_str buffer dynamically
tracing: always define trace_{irq,preempt}_{enable_disable}
tracing: Fix code comments in trace.c
The stack tracer records a stack dump whenever it sees a stack usage that is
more than what it ever saw before. This can happen at any function that is
being traced. If it happens when the CPU is going idle (or other strange
locations), RCU may not be watching, and in this case, the recording of the
stack trace will trigger a warning. There's been lots of efforts to make
hacks to allow stack tracing to proceed even if RCU is not watching, but
this only causes more issues to appear. Simply do not trace a stack if RCU
is not watching. It probably isn't a bad stack anyway.
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o3Rn
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- add a pci_get_domain_bus_and_slot() stub for the CONFIG_PCI=n case to
avoid build breakage in the v4.16 merge window if a
pci_get_bus_and_slot() -> pci_get_domain_bus_and_slot() patch gets
merged before the PCI tree (Randy Dunlap)
- fix an AMD boot regression in the 64bit BAR support added in v4.15
(Christian König)
- fix an R-Car use-after-free that causes a crash if no PCIe card is
present (Geert Uytterhoeven)
* tag 'pci-v4.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: rcar: Fix use-after-free in probe error path
x86/PCI: Only enable a 64bit BAR on single-socket AMD Family 15h
x86/PCI: Fix infinite loop in search for 64bit BAR placement
PCI: Add pci_get_domain_bus_and_slot() stub
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
arch: define weak abort()
mm, oom_reaper: fix memory corruption
kernel: make groups_sort calling a responsibility group_info allocators
mm/frame_vector.c: release a semaphore in 'get_vaddr_frames()'
tools/slabinfo-gnuplot: force to use bash shell
kcov: fix comparison callback signature
mm/slab.c: do not hash pointers when debugging slab
mm/page_alloc.c: avoid excessive IRQ disabled times in free_unref_page_list()
mm/memory.c: mark wp_huge_pmd() inline to prevent build failure
scripts/faddr2line: fix CROSS_COMPILE unset error
Documentation/vm/zswap.txt: update with same-value filled page feature
exec: avoid gcc-8 warning for get_task_comm
autofs: fix careless error in recent commit
string.h: workaround for increased stack usage
mm/kmemleak.c: make cond_resched() rate-limiting more efficient
lib/rbtree,drm/mm: add rbtree_replace_node_cached()
include/linux/idr.h: add #include <linux/bug.h>
gcc toggle -fisolate-erroneous-paths-dereference (default at -O2
onwards) isolates faulty code paths such as null pointer access, divide
by zero etc. If gcc port doesnt implement __builtin_trap, an abort() is
generated which causes kernel link error.
In this case, gcc is generating abort due to 'divide by zero' in
lib/mpi/mpih-div.c.
Currently 'frv' and 'arc' are failing. Previously other arch was also
broken like m32r was fixed by commit d22e3d69ee ("m32r: fix build
failure").
Let's define this weak function which is common for all arch and fix the
problem permanently. We can even remove the arch specific 'abort' after
this is done.
Link: http://lkml.kernel.org/r/1513118956-8718-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes has reported the following memory corruption while the
oom reaper tries to unmap the victims address space
BUG: Bad page map in process oom_reaper pte:6353826300000000 pmd:00000000
addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping: (null) index:7f50cab1d
file: (null) fault: (null) mmap: (null) readpage: (null)
CPU: 2 PID: 1001 Comm: oom_reaper
Call Trace:
unmap_page_range+0x1068/0x1130
__oom_reap_task_mm+0xd5/0x16b
oom_reaper+0xff/0x14c
kthread+0xc1/0xe0
Tetsuo Handa has noticed that the synchronization inside exit_mmap is
insufficient. We only synchronize with the oom reaper if
tsk_is_oom_victim which is not true if the final __mmput is called from
a different context than the oom victim exit path. This can trivially
happen from context of any task which has grabbed mm reference (e.g. to
read /proc/<pid>/ file which requires mm etc.).
The race would look like this
oom_reaper oom_victim task
mmget_not_zero
do_exit
mmput
__oom_reap_task_mm mmput
__mmput
exit_mmap
remove_vma
unmap_page_range
Fix this issue by providing a new mm_is_oom_victim() helper which
operates on the mm struct rather than a task. Any context which
operates on a remote mm struct should use this helper in place of
tsk_is_oom_victim. The flag is set in mark_oom_victim and never cleared
so it is stable in the exit_mmap path.
Debugged by Tetsuo Handa.
Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org
Fixes: 2129258024 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: <stable@vger.kernel.org> [4.14]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.
This patch:
- Make groups_sort globally visible.
- Move the call to groups_sort to the modifiers of group_info
- Remove the call to groups_sort from set_groups
Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker <thiago.becker@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A semaphore is acquired before this check, so we must release it before
leaving.
Link: http://lkml.kernel.org/r/20171211211009.4971-1-christophe.jaillet@wanadoo.fr
Fixes: b7f0554a56 ("mm: fail get_vaddr_frames() for filesystem-dax mappings")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On some linux distributions, the default link of sh is dash which
deoesn't support split array like "${var//,/ }"
It's better to force to use bash shell directly.
Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofia
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If CONFIG_DEBUG_SLAB/CONFIG_DEBUG_SLAB_LEAK are enabled, the slab code
prints extra debug information when e.g. corruption is detected. This
includes pointers, which are not very useful when hashed.
Fix this by using %px to print unhashed pointers instead where it makes
sense, and by removing the printing of a last user pointer referring to
code.
[geert+renesas@glider.be: v2]
Link: http://lkml.kernel.org/r/1513179267-2509-1-git-send-email-geert+renesas@glider.be
Link: http://lkml.kernel.org/r/1512641861-5113-1-git-send-email-geert+renesas@glider.be
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 9cca35d42e ("mm, page_alloc: enable/disable IRQs once
when freeing a list of pages") we see excessive IRQ disabled times of up
to 25ms on an embedded ARM system (tracing overhead included).
This is due to graphics buffers being freed back to the system via
release_pages(). Graphics buffers can be huge, so it's not hard to hit
cases where the list of pages to free has 2048 entries. Disabling IRQs
while freeing all those pages is clearly not a good idea.
Introduce a batch limit, which allows IRQ servicing once every few
pages. The batch count is the same as used in other parts of the MM
subsystem when dealing with IRQ disabled regions.
Link: http://lkml.kernel.org/r/20171207170314.4419-1-l.stach@pengutronix.de
Fixes: 9cca35d42e ("mm, page_alloc: enable/disable IRQs once when freeing a list of pages")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With gcc 4.1.2:
mm/memory.o: In function `wp_huge_pmd':
memory.c:(.text+0x9b4): undefined reference to `do_huge_pmd_wp_page'
Interestingly, wp_huge_pmd() is emitted in the assembler output, but
never called.
Apparently replacing the call to pmd_write() in __handle_mm_fault() by a
call to the more complex pmd_access_permitted() reduced the ability of
the compiler to remove unused code.
Fix this by marking wp_huge_pmd() inline, like was done in commit
91a90140f9 ("mm/memory.c: mark create_huge_pmd() inline to prevent
build failure") for a similar problem.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/1512335500-10889-1-git-send-email-geert@linux-m68k.org
Fixes: c7da82b894 ("mm: replace pmd_write with pmd_access_permitted in fault + gup paths")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
faddr2line hit var unbound error when CROSS_COMPILE isn't set since
nounset option is set in bash script.
Link: http://lkml.kernel.org/r/20171206013022.GA83929@sofia
Fixes: 95a8798254 ("scripts/faddr2line: extend usage on generic arch")
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ecc0c469f2 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes: ecc0c469f2 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hardened strlen() function causes rather large stack usage in at
least one file in the kernel, in particular when CONFIG_KASAN is
enabled:
drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=]
Analyzing this problem led to the discovery that gcc fails to merge the
stack slots for the i2c_board_info[] structures after we strlcpy() into
them, due to the 'noreturn' attribute on the source string length check.
I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8,
since it is relatively easy to work around, and it gets triggered
rarely. An earlier workaround I did added an empty inline assembly
statement before the call to fortify_panic(), which works surprisingly
well, but is really ugly and unintuitive.
This is a new approach to the same problem, this time addressing it by
not calling the 'extern __real_strnlen()' function for string constants
where __builtin_strlen() is a compile-time constant and therefore known
to be safe.
We do this by checking if the last character in the string is a
compile-time constant '\0'. If it is, we can assume that strlen() of
the string is also constant.
As a side-effect, this should also improve the object code output for
any other call of strlen() on a string constant.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: https://patchwork.kernel.org/patch/9980413/
Link: https://patchwork.kernel.org/patch/9974047/
Fixes: 6974f0c455 ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bde5f6bc68 ("kmemleak: add scheduling point to
kmemleak_scan()") tries to rate-limit the frequency of cond_resched()
calls, but does it in a way which might incur an expensive division
operation in the inner loop. Simplify this.
Fixes: bde5f6bc68 ("kmemleak: add scheduling point to kmemleak_scan()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a variant of rbtree_replace_node() that maintains the leftmost cache
of struct rbtree_root_cached when replacing nodes within the rbtree.
As drm_mm is the only rb_replace_node() being used on an interval tree,
the mistake looks fairly self-contained. Furthermore the only user of
drm_mm_replace_node() is its testsuite...
Testcase: igt/drm_mm/replace
Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk
Fixes: f808c13fd3 ("lib/interval_tree: fast overlap detection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The <linux/bug.h> was removed from radix-tree.h by commit f5bba9d11a
("include/linux/radix-tree.h: remove unneeded #include <linux/bug.h>").
Since that commit, tools/testing/radix-tree/ couldn't pass compilation
due to tools/testing/radix-tree/idr.c:17: undefined reference to
WARN_ON_ONCE. This patch adds the bug.h header to idr.h to solve the
issue.
Link: http://lkml.kernel.org/r/1511963726-34070-2-git-send-email-wei.w.wang@intel.com
Fixes: f5bba9d11a ("include/linux/radix-tree.h: remove unneeded #include <linux/bug.h>")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Daniel Vetter:
- two fixes for new core features
- a corner case fix for the connnector_iter fix from last week (this
one is cc: stable)
- one vc4 fix
* tag 'drm-misc-fixes-2017-12-14' of git://anongit.freedesktop.org/drm/drm-misc:
drm/drm_lease: Prevent deadlock in case drm_lease_create() fails
drm: rework delayed connector cleanup in connector_iter
drm: Update edid-derived drm_display_info fields at edid property set [v2]
drm/vc4: Release fence after signalling
Recent rework of the virtio_mmio probe/remove paths balanced a
devm_ioremap() with an iounmap() rather than its devm variant. This ends
up corrupting the devm datastructures, and results in the following
boot-time splat on arm64 under QEMU 2.9.0:
[ 3.450397] ------------[ cut here ]------------
[ 3.453822] Trying to vfree() nonexistent vm area (00000000c05b4844)
[ 3.460534] WARNING: CPU: 1 PID: 1 at mm/vmalloc.c:1525 __vunmap+0x1b8/0x220
[ 3.475898] Kernel panic - not syncing: panic_on_warn set ...
[ 3.475898]
[ 3.493933] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3 #1
[ 3.513109] Hardware name: linux,dummy-virt (DT)
[ 3.525382] Call trace:
[ 3.531683] dump_backtrace+0x0/0x368
[ 3.543921] show_stack+0x20/0x30
[ 3.547767] dump_stack+0x108/0x164
[ 3.559584] panic+0x25c/0x51c
[ 3.569184] __warn+0x29c/0x31c
[ 3.576023] report_bug+0x1d4/0x290
[ 3.586069] bug_handler.part.2+0x40/0x100
[ 3.597820] bug_handler+0x4c/0x88
[ 3.608400] brk_handler+0x11c/0x218
[ 3.613430] do_debug_exception+0xe8/0x318
[ 3.627370] el1_dbg+0x18/0x78
[ 3.634037] __vunmap+0x1b8/0x220
[ 3.648747] vunmap+0x6c/0xc0
[ 3.653864] __iounmap+0x44/0x58
[ 3.659771] devm_ioremap_release+0x34/0x68
[ 3.672983] release_nodes+0x404/0x880
[ 3.683543] devres_release_all+0x6c/0xe8
[ 3.695692] driver_probe_device+0x250/0x828
[ 3.706187] __driver_attach+0x190/0x210
[ 3.717645] bus_for_each_dev+0x14c/0x1f0
[ 3.728633] driver_attach+0x48/0x78
[ 3.740249] bus_add_driver+0x26c/0x5b8
[ 3.752248] driver_register+0x16c/0x398
[ 3.757211] __platform_driver_register+0xd8/0x128
[ 3.770860] virtio_mmio_init+0x1c/0x24
[ 3.782671] do_one_initcall+0xe0/0x398
[ 3.791890] kernel_init_freeable+0x594/0x660
[ 3.798514] kernel_init+0x18/0x190
[ 3.810220] ret_from_fork+0x10/0x18
To fix this, we can simply rip out the explicit cleanup that the devm
infrastructure will do for us when our probe function returns an error
code, or when our remove function returns.
We only need to ensure that we call put_device() if a call to
register_virtio_device() fails in the probe path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7eb781b1bb ("virtio_mmio: add cleanup for virtio_mmio_probe")
Fixes: 25f32223bc ("virtio_mmio: add cleanup for virtio_mmio_remove")
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: weiping zhang <zhangweiping@didichuxing.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Currently, the SVE field in ID_AA64PFR0_EL1 is visible
unconditionally to userspace via the CPU ID register emulation,
irrespective of the kernel config. This means that if a kernel
configured with CONFIG_ARM64_SVE=n is run on SVE-capable hardware,
userspace will see SVE reported as present in the ID regs even
though the kernel forbids execution of SVE instructions.
This patch makes the exposure of the SVE field in ID_AA64PFR0_EL1
conditional on CONFIG_ARM64_SVE=y.
Since future architecture features are likely to encounter a
similar requirement, this patch adds a suitable helper macros for
use when declaring config-conditional ID register fields.
Fixes: 43994d824e ("arm64/sve: Detect SVE and activate runtime support")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In ptdump_check_wx(), we pass walk_pgd() a start address of 0 (rather
than VA_START) for the init_mm. This means that any reported W&X
addresses are offset by VA_START, which is clearly wrong and can make
them appear like userspace addresses.
Fix this by telling the ptdump code that we're walking init_mm starting
at VA_START. We don't need to update the addr_markers, since these are
still valid bounds regardless.
Cc: <stable@vger.kernel.org>
Fixes: 1404d6f13e ("arm64: dump: Add checking for writable and exectuable pages")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Reported-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Conform two stray warning messages to the standard overlayfs: prefix.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This case can been seen when creating the lease with the same objects passed.
[ 605.515097] 2 locks held by testapp/3337:
[ 605.519027] #0: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f1664>] drm_mode_create_lease_ioctl+0x384/0x858
[ 605.530045] #1: (&dev->mode_config.idr_mutex){......}, at: [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
Which was causing the process to hang:
[ 605.398827] [<ffff0000080856cc>] __switch_to+0x94/0xa8
[ 605.404030] [<ffff000008c05d00>] __schedule+0x1b0/0x698
[ 605.409322] [<ffff000008c06224>] schedule+0x3c/0xa8
[ 605.414260] [<ffff000008c06628>] schedule_preempt_disabled+0x20/0x38
[ 605.420677] [<ffff000008c07370>] mutex_lock_nested+0x158/0x340
[ 605.426572] [<ffff0000085f11bc>] drm_lease_destroy+0x2c/0x110
[ 605.432389] [<ffff0000085cecf0>] drm_master_put+0xc0/0xc8
[ 605.437845] [<ffff0000085f175c>] drm_mode_create_lease_ioctl+0x47c/0x858
[ 605.444612] [<ffff0000085d4460>] drm_ioctl+0x198/0x448
[ 605.449811] [<ffff000008201134>] do_vfs_ioctl+0xa4/0x748
[ 605.455192] [<ffff000008201864>] SyS_ioctl+0x8c/0xa0
[ 605.460216] [<ffff000008082f4c>] __sys_trace_return+0x0/0x4
drm_mode_create_lease_ioctl() calls drm_lease_create() which acquires a lock
on dev->mode_config.idr_mutex. In case of failure, drm_lease_create() calls
drm_master_put() which in turn tries to acquire the same lock when calling
drm_lease_destroy().
v2: - Reverse the order at exit in case of fail, so that unlocking takes place
before dropping the reference.
- Include detail information about deadlock (Daniel Vetter)
Signed-off-by: Marius Vlad <marius-cristian.vlad@nxp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213181048.32719-1-marius-cristian.vlad@nxp.com
- Clean up duplicate includes
- Remove ancient 'no-alloc' crap code that occasionally caused hard fs
shutdowns due to lack of proper space reservations
- Fix regression in FIEMAP behavior when reporting xattr extents
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cmic
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.15-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a few more bug fixes & cleanups for 4.15-rc4:
- clean up duplicate includes
- remove ancient 'no-alloc' crap code that occasionally caused hard
fs shutdowns due to lack of proper space reservations
- fix regression in FIEMAP behavior when reporting xattr extents"
* tag 'xfs-4.15-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: make iomap_begin functions trim iomaps consistently
xfs: remove "no-allocation" reservations for file creations
fs: xfs: remove duplicate includes
This pull request contains three small fixes that I'm hoping to get into
4.15-rc4:
* A fix to a typo in sys_riscv_flush_icache. This only effects error
handling, but I think it's a small and obvious enough change that it's
sane outside the merge window.
* The addition of smp_mb__after_spinlock(), which was recently removed
due to an incorrect comment. This is largly a comment change (as
there's a big one now), and while it's necessary for complience with
the RISC-V memory model the lack of this fence shouldn't manifest as a
bug on current implementations. Nonetheless, it still seems saner to
have the fence in 4.15.
* The removal of some of the HVC_RISCV_SBI driver that snuck into the
arch port. This is compile-time dead code in 4.15 (as the driver
isn't in yet), and during the review process we found a better way to
implement early printk on RISC-V. While this change doesn't do
anything, it will make staging our HVC driver easier: without this
change the HVC driver we hope to upstream won't build on 4.15 (because
the 4.15 arch code would reference a function that no longer exists).
Additionally, I'm instituting a bit of a process change so I don't
submit things too quickly again:
* All the patches I submit during an RC will be from the week before, so
everyone has gotten a chance to see them and they've made it through
our autobuilders and integration trees.
* I'll cherry-pick (single patches) or merge (if it's a patch set) on
top of the new RC on Monday morning.
* I'll sign the tag on Monday morning, to let the autobuilders pick up
exactly what I'm submitting.
* Assuming nothing goes wrong, I'll mail the pull request out on
Wednesday. If something goes wrong, I'll wait at least a day after
re-spinning the tag to let the autobuilders pick things up.
Hopefully this will avoid any headaches in the future, barring any
emergency fixes.
I don't think this is the last patch set we'll want for 4.15: I think
I'll want to remove some of the first-level irqchip driver that snuck in
as well, which will look a lot like the HVC patch here. This is pending
some asm-generic cleanup I'm doing that I haven't quite gotten clean
enough to send out yet, though, but hopefully it'll be ready by next
week (and still OK for that late).
-----BEGIN PGP SIGNATURE-----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=FRZX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-rc4-riscv_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains three small fixes:
- A fix to a typo in sys_riscv_flush_icache. This only effects error
handling, but I think it's a small and obvious enough change that
it's sane outside the merge window.
- The addition of smp_mb__after_spinlock(), which was recently
removed due to an incorrect comment. This is largly a comment
change (as there's a big one now), and while it's necessary for
complience with the RISC-V memory model the lack of this fence
shouldn't manifest as a bug on current implementations.
Nonetheless, it still seems saner to have the fence in 4.15.
- The removal of some of the HVC_RISCV_SBI driver that snuck into the
arch port. This is compile-time dead code in 4.15 (as the driver
isn't in yet), and during the review process we found a better way
to implement early printk on RISC-V. While this change doesn't do
anything, it will make staging our HVC driver easier: without this
change the HVC driver we hope to upstream won't build on 4.15
(because the 4.15 arch code would reference a function that no
longer exists).
I don't think this is the last patch set we'll want for 4.15: I think
I'll want to remove some of the first-level irqchip driver that snuck
in as well, which will look a lot like the HVC patch here. This is
pending some asm-generic cleanup I'm doing that I haven't quite gotten
clean enough to send out yet, though, but hopefully it'll be ready by
next week (and still OK for that late)"
* tag 'riscv-for-linus-4.15-rc4-riscv_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
RISC-V: Remove unused CONFIG_HVC_RISCV_SBI code
RISC-V: Resurrect smp_mb__after_spinlock()
RISC-V: Logical vs Bitwise typo
Daniel Borkmann says:
====================
pull-request: bpf 2017-12-13
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Addition of explicit scheduling points to map alloc/free
in order to avoid having to hold the CPU for too long,
from Eric.
2) Fixing of a corruption in overlapping perf_event_output
calls from different BPF prog types on the same CPU out
of different contexts, from Daniel.
3) Fallout fixes for recent correction of broken uapi for
BPF_PROG_TYPE_PERF_EVENT. um had a missing asm header
that needed to be pulled in from asm-generic and for
BPF selftests the asm-generic include did not work,
so similar asm include scheme was adapted for that
problematic header that perf is having with other
header files under tools, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.
Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.
v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).
v3
- Add init_llist_head (Chris).
Fixes: a703c55004 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac4 ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
Tariq Toukan says:
====================
mlx4 misc fixes
This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.
Patch 1 by Eugenia fixes an MTU issue in selftest.
Patch 2 by Eran fixes an accounting issue in the resource tracker.
Patch 3 by Eran fixes a race condition that causes counter inconsistency.
Series generated against net commit:
200809716a fou: fix some member types in guehdr
v2:
Patch 2: Add reviewer credit, rephrase commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch, the stats_lock was acquired twice. In between the
locks Driver sent command to gather some more statistics (per priority
and counter statistics). If the stats lock was acquired by get
statistics NDO in between we would have report out of sync counters.
Fix this by collecting all stats from Firmware in advance and then
fill the Software structs under one lock.
Fixes: 0b131561a7 ("net/mlx4_en: Add Flow control statistics display via ethtool")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>