Граф коммитов

77 Коммитов

Автор SHA1 Сообщение Дата
Mimi Zohar 867c202654 ima: fix add LSM rule bug
If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.

This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.

Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.

 default IMA TCB policy:
  # PROC_SUPER_MAGIC
  dont_measure fsmagic=0x9fa0
  # SYSFS_MAGIC
  dont_measure fsmagic=0x62656572
  # DEBUGFS_MAGIC
  dont_measure fsmagic=0x64626720
  # TMPFS_MAGIC
  dont_measure fsmagic=0x01021994
  # SECURITYFS_MAGIC
  dont_measure fsmagic=0x73636673

  < LSM specific rule >
  dont_measure obj_type=var_log_t

  measure func=BPRM_CHECK
  measure func=FILE_MMAP mask=MAY_EXEC
  measure func=FILE_CHECK mask=MAY_READ uid=0

Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured.  The patch
prevents the default TCB policy from being replaced.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-03 16:36:33 -08:00
Eric Paris bade72d607 IMA: fix the ToMToU logic
Current logic looks like this:

        rc = ima_must_measure(NULL, inode, MAY_READ, FILE_CHECK);
        if (rc < 0)
                goto out;

        if (mode & FMODE_WRITE) {
                if (inode->i_readcount)
                        send_tomtou = true;
                goto out;
        }

        if (atomic_read(&inode->i_writecount) > 0)
                send_writers = true;

Lets assume we have a policy which states that all files opened for read
by root must be measured.

Lets assume the file has permissions 777.

Lets assume that root has the given file open for read.

Lets assume that a non-root process opens the file write.

The non-root process will get to ima_counts_get() and will check the
ima_must_measure().  Since it is not supposed to measure it will goto
out.

We should check the i_readcount no matter what since we might be causing
a ToMToU voilation!

This is close to correct, but still not quite perfect.  The situation
could have been that root, which was interested in the mesurement opened
and closed the file and another process which is not interested in the
measurement is the one holding the i_readcount ATM.  This is just overly
strict on ToMToU violations, which is better than not strict enough...

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:19 -07:00
Eric Paris 196f518128 IMA: explicit IMA i_flag to remove global lock on inode_delete
Currently for every removed inode IMA must take a global lock and search
the IMA rbtree looking for an associated integrity structure.  Instead
we explicitly mark an inode when we add an integrity structure so we
only have to take the global lock and do the removal if it exists.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:19 -07:00
Eric Paris 64c62f06be IMA: drop refcnt from ima_iint_cache since it isn't needed
Since finding a struct ima_iint_cache requires a valid struct inode, and
the struct ima_iint_cache is supposed to have the same lifetime as a
struct inode (technically they die together but don't need to be created
at the same time) we don't have to worry about the ima_iint_cache
outliving or dieing before the inode.  So the refcnt isn't useful.  Just
get rid of it and free the structure when the inode is freed.

Signed-off-by: Eric Paris <eapris@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:19 -07:00
Eric Paris bc7d2a3e66 IMA: only allocate iint when needed
IMA always allocates an integrity structure to hold information about
every inode, but only needed this structure to track the number of
readers and writers currently accessing a given inode.  Since that
information was moved into struct inode instead of the integrity struct
this patch stops allocating the integrity stucture until it is needed.
Thus greatly reducing memory usage.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris a178d2027d IMA: move read counter into struct inode
IMA currently allocated an inode integrity structure for every inode in
core.  This stucture is about 120 bytes long.  Most files however
(especially on a system which doesn't make use of IMA) will never need
any of this space.  The problem is that if IMA is enabled we need to
know information about the number of readers and the number of writers
for every inode on the box.  At the moment we collect that information
in the per inode iint structure and waste the rest of the space.  This
patch moves those counters into the struct inode so we can eventually
stop allocating an IMA integrity structure except when absolutely
needed.

This patch does the minimum needed to move the location of the data.
Further cleanups, especially the location of counter updates, may still
be possible.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris b9593d309d IMA: use i_writecount rather than a private counter
IMA tracks the number of struct files which are holding a given inode
readonly and the number which are holding the inode write or r/w.  It
needs this information so when a new reader or writer comes in it can
tell if this new file will be able to invalidate results it already made
about existing files.

aka if a task is holding a struct file open RO, IMA measured the file
and recorded those measurements and then a task opens the file RW IMA
needs to note in the logs that the old measurement may not be correct.
It's called a "Time of Measure Time of Use" (ToMToU) issue.  The same is
true is a RO file is opened to an inode which has an open writer.  We
cannot, with any validity, measure the file in question since it could
be changing.

This patch attempts to use the i_writecount field to track writers.  The
i_writecount field actually embeds more information in it's value than
IMA needs but it should work for our purposes and allow us to shrink the
struct inode even more.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris ad16ad00c3 IMA: use inode->i_lock to protect read and write counters
Currently IMA used the iint->mutex to protect the i_readcount and
i_writecount.  This patch uses the inode->i_lock since we are going to
start using in inode objects and that is the most appropriate lock.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris 15aac67677 IMA: convert internal flags from long to char
The IMA flags is an unsigned long but there is only 1 flag defined.
Lets save a little space and make it a char.  This packs nicely next to
the array of u8's.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris 497f323370 IMA: use unsigned int instead of long for counters
Currently IMA uses 2 longs in struct inode.  To save space (and as it
seems impossible to overflow 32 bits) we switch these to unsigned int.
The switch to unsigned does require slightly different checks for
underflow, but it isn't complex.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:18 -07:00
Eric Paris b575156daf IMA: drop the inode opencount since it isn't needed for operation
The opencount was used to help debugging to make sure that everything
which created a struct file also correctly made the IMA calls.  Since we
moved all of that into the VFS this isn't as necessary.  We should be
able to get the same amount of debugging out of just the reader and
write count.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:17 -07:00
Eric Paris 8549164143 IMA: use rbtree instead of radix tree for inode information cache
The IMA code needs to store the number of tasks which have an open fd
granting permission to write a file even when IMA is not in use.  It
needs this information in order to be enabled at a later point in time
without losing it's integrity garantees.

At the moment that means we store a little bit of data about every inode
in a cache.  We use a radix tree key'd on the inode's memory address.
Dave Chinner pointed out that a radix tree is a terrible data structure
for such a sparse key space.  This patch switches to using an rbtree
which should be more efficient.

Bug report from Dave:

 "I just noticed that slabtop was reporting an awfully high usage of
  radix tree nodes:

   OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME
  4200331 2778082  66%    0.55K 144839       29   2317424K radix_tree_node
  2321500 2060290  88%    1.00K  72581       32   2322592K xfs_inode
  2235648 2069791  92%    0.12K  69864       32    279456K iint_cache

  That is, 2.7M radix tree nodes are allocated, and the cache itself is
  consuming 2.3GB of RAM.  I know that the XFS inodei caches are indexed
  by radix tree node, but for 2 million cached inodes that would mean a
  density of 1 inode per radix tree node, which for a system with 16M
  inodes in the filsystems is an impossibly low density.  The worst I've
  seen in a production system like kernel.org is about 20-25% density,
  which would mean about 150-200k radix tree nodes for that many inodes.
  So it's not the inode cache.

  So I looked up what the iint_cache was.  It appears to used for
  storing per-inode IMA information, and uses a radix tree for indexing.
  It uses the *address* of the struct inode as the indexing key.  That
  means the key space is extremely sparse - for XFS the struct inode
  addresses are approximately 1000 bytes apart, which means the closest
  the radix tree index keys get is ~1000.  Which means that there is a
  single entry per radix tree leaf node, so the radix tree is using
  roughly 550 bytes for every 120byte structure being cached.  For the
  above example, it's probably wasting close to 1GB of RAM...."

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 11:37:17 -07:00
Mimi Zohar e950598d43 ima: always maintain counters
commit 8262bb85da allocated the inode integrity struct (iint) before any
inodes were created. Only after IMA was initialized in late_initcall were
the counters updated. This patch updates the counters, whether or not IMA
has been initialized, to resolve 'imbalance' messages.

This patch fixes the bug as reported in bugzilla: 15673.  When the i915
is builtin, the ring_buffer is initialized before IMA, causing the
imbalance message on suspend.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: David Safford<safford@watson.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2010-09-08 09:51:41 +10:00
Arnd Bergmann cdcd90f9e4 ima: use generic_file_llseek for securityfs
The default for llseek will change to no_llseek,
so securityfs users need to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:34:58 +10:00
NeilBrown db1afffab0 kref: remove kref_set
Of the three uses of kref_set in the kernel:

 One really should be kref_put as the code is letting go of a
    reference,
 Two really should be kref_init because the kref is being
    initialised.

This suggests that making kref_set available encourages bad code.
So fix the three uses and remove kref_set completely.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Mimi Zohar ba0c1709f4 ima: remove ACPI dependency
The ACPI dependency moved to the TPM, where it belongs.  Although
IMA per-se does not require access to the bios measurement log,
verifying the IMA boot aggregate does, which requires ACPI.

This patch prereq's 'TPM: ACPI/PNP dependency removal'
http://lkml.org/lkml/2010/5/4/378.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reported-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-05-17 09:21:58 +10:00
James Morris 83c36ccfe4 Revert "ima: remove ACPI dependency"
This reverts commit a674fa46c7.

Previous revert was a prereq.

Signed-off-by: James Morris <jmorris@namei.org>
2010-05-07 09:20:03 +10:00
James Morris 0ffbe2699c Merge branch 'master' into next 2010-05-06 10:56:07 +10:00
Mimi Zohar a674fa46c7 ima: remove ACPI dependency
The ACPI dependency moved to the TPM, where it belongs.  Although
IMA per-se does not require access to the bios measurement log,
verifying the IMA boot aggregate does, which requires ACPI.

This patch prereq's 'TPM: ACPI/PNP dependency removal'
http://lkml.org/lkml/2010/5/4/378.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reported-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Tested-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-05-05 10:00:06 +10:00
Eric Paris eb8dae9607 IMA: include the word IMA in printk messages
As an example IMA emits a warning when it can't find a TPM chip:

"No TPM chip found, activating TPM-bypass!"

This patch prefaces that message with IMA so we know what subsystem is
bypassing the TPM.  Do this for all pr_info and pr_err messages.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-23 08:47:53 +10:00
Eric Paris 34c111f626 IMA: drop the word integrity in the audit message
integrity_audit_msg() uses "integrity:" in the audit message.  This
violates the (loosely defined) audit system requirements that everything be
a key=value pair and it doesn't provide additional information.  This can
be obviously gleaned from the message type.  Just drop it.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:18 +10:00
Eric Paris 2f1506cd82 IMA: use audit_log_untrusted_string rather than %s
Convert all of the places IMA calls audit_log_format with %s into
audit_log_untrusted_string().  This is going to cause them all to get
quoted, but it should make audit log injection harder.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:17 +10:00
Eric Paris 7233e3ee22 IMA: handle comments in policy
IMA policy load parser will reject any policies with a comment.  This patch
will allow the parser to just ignore lines which start with a #.  This is not
very robust.  # can ONLY be used at the very beginning of a line.  Inline
comments are not allowed.

Signed-off-by: Eric Paris
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:16 +10:00
Eric Paris 28ef4002ec IMA: handle whitespace better
IMA parser will fail if whitespace is used in any way other than a single
space.  Using a tab or even using 2 spaces in a row will result in a policy
being rejected.  This patch makes the kernel ignore whitespace a bit better.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:16 +10:00
Eric Paris e9d393bf86 IMA: reject policies with unknown entries
Currently the ima policy load code will print what it doesn't understand
but really I think it should reject any policy it doesn't understand.  This
patch makes it so!

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:15 +10:00
Eric Paris b9035b1fd7 IMA: set entry->action to UNKNOWN rather than hard coding
ima_parse_rule currently sets entry->action = -1 and then later tests
if (entry->action == UNKNOWN).  It is true that UNKNOWN == -1 but actually
setting it to UNKNOWN makes a lot more sense in case things change in the
future.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:14 +10:00
Eric Paris 7b62e16212 IMA: do not allow the same rule to specify the same thing twice
IMA will accept rules which specify things twice and will only pay
attention to the last one.  We should reject such rules.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:14 +10:00
Eric Paris 6ccd045630 ima: handle multiple rules per write
Currently IMA will only accept one rule per write().  This patch allows IMA to
accept writes which contain multiple rules but only processes one rule per
write.  \n is used as the delimiter between rules.  IMA will return a short
write indicating that it only accepted up to the first \n.

This allows simple userspace utilities like cat to be used to load an IMA
policy instead of needing a special userspace utility that understood 'one
write per rule'

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-04-21 09:58:13 +10:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
H Hartley Sweeten a19c5bbefb security/ima: replace gcc specific __FUNCTION__ with __func__
As noted by checkpatch.pl, __func__ should be used instead of gcc
specific __FUNCTION__.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-03-10 15:59:54 +11:00
Xiaotian Feng baac35c415 security: fix error return path in ima_inode_alloc
If radix_tree_preload is failed in ima_inode_alloc, we don't need
radix_tree_preload_end because kernel is alread preempt enabled

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2010-02-25 07:54:33 +11:00
Mimi Zohar 1e93d0052d ima: rename PATH_CHECK to FILE_CHECK
With the movement of the ima hooks functions were renamed from *path* to
*file* since they always deal with struct file.  This patch renames some of
the ima internal flags to make them consistent with the rest of the code.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:23 -05:00
Mimi Zohar 9bbb6cad01 ima: rename ima_path_check to ima_file_check
ima_path_check actually deals with files!  call it ima_file_check instead.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:22 -05:00
Eric Paris 54bb6552bd ima: initialize ima before inodes can be allocated
ima wants to create an inode information struct (iint) when inodes are
allocated.  This means that at least the part of ima which does this
allocation (the allocation is filled with information later) should
before any inodes are created.  To accomplish this we split the ima
initialization routine placing the kmem cache allocator inside a
security_initcall() function.  Since this makes use of radix trees we also
need to make sure that is initialized before security_initcall().

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:22 -05:00
Mimi Zohar 8eb988c70e fix ima breakage
The "Untangling ima mess, part 2 with counters" patch messed
up the counters.  Based on conversations with Al Viro, this patch
streamlines ima_path_check() by removing the counter maintaince.
The counters are now updated independently, from measuring the file,
in __dentry_open() and alloc_file() by calling ima_counts_get().
ima_path_check() is called from nfsd and do_filp_open().
It also did not measure all files that should have been measured.
Reason: ima_path_check() got bogus value passed as mask.
[AV: mea culpa]
[AV: add missing nfsd bits]

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-07 03:06:22 -05:00
Mimi Zohar d1625436b4 ima: limit imbalance msg
Limit the number of imbalance messages to once per filesystem type instead of
once per system boot.  (it's actually slightly racy and could give you a
couple per fs, but this isn't a real issue)

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:48 -05:00
Al Viro 1429b3eca2 Untangling ima mess, part 3: kill dead code in ima
Kill the 'update' argument of ima_path_check(), kill
dead code in ima.

Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one.  Which happens exactly in two places - alloc_file()
and __dentry_open().  Nothing else needs to do that at
all.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:47 -05:00
Eric Paris 85a17f552d ima: call ima_inode_free ima_inode_free
ima_inode_free() has some funky #define just to confuse the crap out of me.

void ima_iint_delete(struct inode *inode)

and then things actually call ima_inode_free() and nothing calls
ima_iint_delete().

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:46 -05:00
Eric Paris e0d5bd2aec IMA: clean up the IMA counts updating code
We currently have a lot of duplicated code around ima file counts.  Clean
that all up.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:46 -05:00
Eric Paris 9353384ec8 ima: only insert at inode creation time
iints are supposed to be allocated when an inode is allocated (during
security_inode_alloc())  But we have code which will attempt to allocate
an iint during measurement calls.  If we couldn't allocate the iint and we
cared, we should have died during security_inode_alloc().  Not make the
code more complex and less efficient.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:46 -05:00
Eric Paris ec29ea544b ima: valid return code from ima_inode_alloc
ima_inode_alloc returns 0 and 1, but the LSM hooks expects an errno.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:46 -05:00
James Morris c84d6efd36 Merge branch 'master' into next 2009-12-03 12:03:40 +05:30
Mimi Zohar c09c59e6a0 ima: replace GFP_KERNEL with GFP_NOFS
While running fsstress tests on the NFSv4 mounted ext3 and ext4
filesystem, the following call trace was generated on the nfs
server machine.

Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a
potential deadlock.

     =================================
    [ INFO: inconsistent lock state ]
    2.6.31-31.el6.x86_64 #1
    ---------------------------------
    inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage.
    kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes:
     (jbd2_handle){+.+.?.}, at: [<ffffffff811edd5e>] jbd2_journal_start+0xfe/0x13f
    {RECLAIM_FS-ON-W} state was registered at:
      [<ffffffff81091e40>] mark_held_locks+0x65/0x99
      [<ffffffff81091f31>] lockdep_trace_alloc+0xbd/0xf5
      [<ffffffff81126fdd>] kmem_cache_alloc+0x40/0x185
      [<ffffffff812344d7>] ima_iint_insert+0x3d/0xf1
      [<ffffffff812345b0>] ima_inode_alloc+0x25/0x44
      [<ffffffff811484ac>] inode_init_always+0xec/0x271
      [<ffffffff81148682>] alloc_inode+0x51/0xa1
      [<ffffffff81148700>] new_inode+0x2e/0x94
      [<ffffffff811b2f08>] ext4_new_inode+0xb8/0xdc9
      [<ffffffff811be611>] ext4_create+0xcf/0x175
      [<ffffffff8113e2cd>] vfs_create+0x82/0xb8
      [<ffffffff8113f337>] do_filp_open+0x32c/0x9ee
      [<ffffffff811309b9>] do_sys_open+0x6c/0x12c
      [<ffffffff81130adc>] sys_open+0x2e/0x44
      [<ffffffff81011e42>] system_call_fastpath+0x16/0x1b
      [<ffffffffffffffff>] 0xffffffffffffffff
    irq event stamp: 90371
    hardirqs last  enabled at (90371): [<ffffffff8112708d>]
    kmem_cache_alloc+0xf0/0x185
    hardirqs last disabled at (90370): [<ffffffff81127026>]
    kmem_cache_alloc+0x89/0x185
    softirqs last  enabled at (89492): [<ffffffff81068ecf>]
    __do_softirq+0x1bf/0x1eb
    softirqs last disabled at (89477): [<ffffffff8101312c>] call_softirq+0x1c/0x30

    other info that might help us debug this:
    2 locks held by kswapd2/75:
     #0:  (shrinker_rwsem){++++..}, at: [<ffffffff810f98ba>] shrink_slab+0x44/0x177
     #1:  (&type->s_umount_key#25){++++..}, at: [<ffffffff811450ba>]

Reported-by: Muni P. Beerakam <mbeeraka@in.ibm.com>
Reported-by: Amit K. Arora <amitarora@in.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-11-19 08:42:01 +11:00
Mimi Zohar 6c21a7fb49 LSM: imbed ima calls in the security hooks
Based on discussions on LKML and LSM, where there are consecutive
security_ and ima_ calls in the vfs layer, move the ima_ calls to
the existing security_ hooks.

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-25 12:22:48 +08:00
Alexey Dobriyan 828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
James Morris 88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Mimi Zohar acd0c93517 IMA: update ima_counts_put
- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.

- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.

Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-07 11:54:58 +10:00
Linus Torvalds 5311034ddd Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  IMA: iint put in ima_counts_get and put
2009-08-26 20:17:07 -07:00
Eric Paris 53a7197aff IMA: iint put in ima_counts_get and put
ima_counts_get() calls ima_iint_find_insert_get() which takes a reference
to the iint in question, but does not put that reference at the end of the
function.  This can lead to a nasty memory leak.  Easy enough to reproduce:

#include <sys/mman.h>
#include <stdio.h>

int main (void)
{
	int i;
	void *ptr;

	for (i=0; i < 100000; i++) {
		ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE,
			   MAP_SHARED|MAP_ANONYMOUS, -1, 0);
		if (ptr == MAP_FAILED)
			return 2;
		munmap(ptr, 4096);
	}

	return 0;
}

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-27 11:01:03 +10:00
Mimi Zohar 16bfa38b19 ima: hashing large files bug fix
Hashing files larger than INT_MAX causes process to loop.
Dependent on redefining kernel_read() offset type to loff_t.

(http://bugzilla.kernel.org/show_bug.cgi?id=13909)

Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-24 14:58:29 +10:00