gcc-8 reports an uninitialized variable access in a code path
that we would see with incorrect DTB input:
drivers/clk/sunxi/clk-sun8i-bus-gates.c: In function 'sun8i_h3_bus_gates_init':
drivers/clk/sunxi/clk-sun8i-bus-gates.c:85:27: error: 'clk_parent' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This works around by skipping invalid input and printing a warning
instead if it ever happens. The problem was apparently part of the
initiali driver submission, but older compilers don't notice it.
Fixes: ab6e23a4e3 ("clk: sunxi: Add H3 clocks support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: James Liao <jamesjj.liao@mediatek.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The usual patches from us, but most notably the introduction of the A64
clocks unit.
-----BEGIN PGP SIGNATURE-----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=7+Az
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Pull Allwinner clock changes from Maxime Ripard:
The usual patches from us, but most notably the introduction of the A64
clocks unit.
* tag 'sunxi-clk-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
clk: sunxi-ng: sun8i-h3: Set CLK_SET_RATE_PARENT for audio module clocks
clk: sunxi-ng: sun8i-a23: Set CLK_SET_RATE_PARENT for audio module clocks
clk: sunxi-ng: Add A64 clocks
clk: sunxi-ng: Implement minimum for multipliers
clk: sunxi-ng: Add minimums for all the relevant structures and clocks
clk: sunxi-ng: Finish to convert to structures for arguments
clk: sunxi-ng: Remove the use of rational computations
clk: sunxi-ng: Rename the internal structures
clk: sunxi: mod0: improve function-level documentation
commit cfa6368860 ("clk: sunxi: factors: Consolidate get_factors
parameters into a struct") introduced a regression for m factor
computation in sun4i_get_apb1_factors function.
The old code reassigned the "parent_rate" parameter to the targeted
divisor value and was buggy for the returned frequency but not for the
computed factors. Now, returned frequency is good but m factor is
incorrectly computed (its max value 31 is always set resulting in a
significantly slower frequency than the requested one...)
This patch simply restores the original proper computation for m while
keeping the good changes for returned rate.
Fixes: cfa6368860 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct")
Signed-off-by: Stéphan Rafin <stephan@soliotek.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Use the actual function name in the function documentation.
Issue detected using Coccinelle (http://coccinelle.lip6.fr/)
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This driver initializes a clock provider via sun8i_a23_apb0_setup
and then continues the initialization on sun8i_a23_apb0_clk_probe.
Use the new macro to notify the clk subsystem about this behaviour.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This driver initializes a clock provider via sun4i_a10_mod0_setup
and then continues the initialization on sun4i_a10_mod0_clk_probe.
Use the new macro to notify the clk subsystem about this behaviour.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
In case of error, the function of_io_request_and_map() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
In case of error, the functions clk_register_composite() and
clk_register_divider() returns ERR_PTR() and never returns NULL.
The NULL test in the return value check should be replaced with
IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We have the following file --> Kconfig mapping:
sunxi/clk-factors.c obj-y
sunxi/clk-sun6i-apb0-gates.c CONFIG_MFD_SUN6I_PRCM (bool)
sunxi/clk-sun6i-apb0.c CONFIG_MFD_SUN6I_PRCM
sunxi/clk-sun6i-ar100.c CONFIG_MFD_SUN6I_PRCM
sunxi/clk-sun8i-apb0.c CONFIG_MFD_SUN6I_PRCM
sunxi/clk-sun9i-mmc.c obj-y
Hence none of these are being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the drivers there is no doubt they are builtin-only. All
drivers get mostly the same changes, so they are handled in batch.
Changes are (1) convert to builtin_platform_register, (2) use the
init.h header, (3) delete the MODULE_LICENCE/MODULE_AUTHOR and
associated tags, and (4) delete any ".remove" functions.
There was a stray module.h in a file not using any init.h or
module.h stuff, so we simply removed that one.
In two cases, we explicitly disallow a driver unbind, since that
doesn't have a sensible use case anyway, and it allows us to drop
the ".remove" code for non-modular drivers.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We delete the MODULE_LICENSE etc. tags since all that information
is already contained at the top of each file in the comments.
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20160704211220.5685-9-paul.gortmaker@windriver.com
The only use of the local num_parents variable was remove,
so we now get a warning:
drivers/clk/sunxi/clk-sun4i-tcon-ch1.c: In function 'tcon_ch1_get_parent':
drivers/clk/sunxi/clk-sun4i-tcon-ch1.c:82:6: error: unused variable 'num_parents' [-Werror=unused-variable]
This removes the variable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4de2d58bc9 ("clk: sunxi: tcon-ch1: Do not return a negative error in get_parent")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The TCON channel 0 clock that is the parent clock of our pixel clock is
expected to change its rate depending on the resolution we want to output
in our display engine.
However, since it's only a mux, the only way it can do that is by changing
its parents rate.
Allow to give flags in our display clocks description, and add the
CLK_SET_RATE_PARENT flag for the TCON channel 0 flag.
Fixes: a3b4956ee6d9 ("clk: sunxi: display: Add per-clock flags")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
get_parent is supposed to return an unsigned 8 bit integer, so returning
-EINVAL is a bad idea.
Remove it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10 SoCs and its relatives has a special clock controller to drive the
display engines (both frontend and backend), that have a lot in common with
the clock to drive the first TCON channel.
Add a driver to support both.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Silence variable sized array warning]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
As usual, a bunch of clocks patches for 4.7, mostly fixes and cleanups, and
display-related clocks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttF/
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clocks-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next
Pull Allwinner clock driver updates from Maxime Ripard:
As usual, a bunch of clocks patches for 4.7, mostly fixes and cleanups, and
display-related clocks.
* tag 'sunxi-clocks-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
clk: sunxi: Let divs clocks read the base factor clock name from devicetree
clk: sunxi: Add TCON channel1 clock
clk: sunxi: Add PLL3 clock
dt-bindings: clk: sun5i: add DRAM gates compatible
clk: sunxi: Use resource_size
clk: sunxi: Add sun6i/8i display support
clk: sunxi: mod1 clock should modify it's parent
Currently, the sunxi clock driver gets the name for the base factor clock
of divs clocks from the name field in factors_data. This prevents reusing
of the factor clock for clocks with same properties, but different name.
This commit makes the divs setup function try to get a name from
clock-output-names in the devicetree. It also removes the name field where
possible and merges the sun4i PLL5 and PLL6 clocks.
[Andre: Make temporary name allocation dynamic.]
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The TCON is a controller generating the timings to output videos signals,
acting like both a CRTC and an encoder.
It has two channels depending on the output, each channel being driven by
its own clock (and own clock controller).
Add a driver for the channel 1 clock.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
The A10 SoCs and relatives have a PLL controller to drive the PLL3 and
PLL7, clocked from a 3MHz oscillator, that drives the display related
clocks (GPU, display engine, TCON, etc.)
Add a driver for it.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Use the function resource_size instaed of explicit computation.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add the clock type which is used by the sun6i/8i families for video display.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
add CLK_SET_RATE_PARENT to modify the rate on clk upstream
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This flag is a no-op now. Remove usage of the flag.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The sunxi_ve_reset_ops, sun9i_mmc_reset_ops, and sunxi_usb_reset_ops
structures are never modified. Make them const.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Using an array allocated on the stack may lead to stack overflows
and other problems so let's move the allocation to the heap
instead. This silences the following checker warning as well.
drivers/clk/sunxi/clk-sun8i-mbus.c:36:29: warning: Variable length array is used
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds support for APB0 in H3. It seems to be compatible with
earlier SOCs. apb0 gates controls R_ block peripherals (R_PIO, R_IR,
etc).
Since this gates behave just like any Allwinner clock gate, add a generic
compatible that can be reused if we don't have any clock to protect.
Signed-off-by: Krzysztof Adamski <k@japko.eu>
[Maxime: Removed the H3 compatible from the simple-gates driver, reworked
the commit log a bit]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We catch errors in the base clock registration, failure to ioremap
and failures in the final of_clk_add_provider() call.
Also we unmap the registers when we need to rollback.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now report a failing ioremap, failing output names parsing,
failures in table registration and in the final step.
Also there was a bug where clk_register_divider_table() would return
an ERR_PTR value instead of NULL, which we were checking for.
We now implement proper rollback in case of an error.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
We now catch and report a failing ioremap, also a failure in the final
step of the clock registration is now handled and reported.
Also warnings are turned into errors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The APB0 clock on A23 is a zero-based divider, not a power-of-two based
divider.
Note that this patch does not apply cleanly to kernels before 4.5-rc1,
which added CLK_OF_DECLARE support to this driver.
Fixes: 57a1fbf284 ("clk: sunxi: Add A23 APB0 divider clock support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that our protection code doesn't use the global name lookup anymore, we
can remove the clkdev registrations.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The current clock registration and protection code has a few drawbacks, the
two main ones being that we create a lot of orphans clock in the
registration phase, which will be troublesome when we will start being less
relaxed about them.
The protection code also relies on clkdev, which we don't really use but
for this particular case.
Fix both at the same time by moving everyone to the CLK_OF_DECLARE that
will probe our clock tree in the right and thus avoid orphans, and by
protecting directly the clock returned by our registration function.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All the data structure that we pass to the clocks setup functions are
declared const, while our setup functions expects a regular pointer. This
was hidden by the fact that we cast a void * pointer back to these
structures, which made it go unnoticed.
Fix the functions prototype.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The clocks registration code in clk-sunxi was most of the time not
returning the struct clk (or struct clk array) that was registered,
preventing the users of such functions to manipulate it, for example to
protect it.
Make them return it so that we can start using it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
clk_register_mux returns a pointer wrapped error value in case of
failure, so a simple NULL check is not sufficient to catch errors.
Fix that and elaborate on the failure reason on the way. The whole
function does not return any error value, so silently failing may
leave users scratching their heads because the kernel does not
provide any clues on what's wrong.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The clk-sun6i-ar100 clk driver is a platform driver that may use
deferred probing, so its probe function must not access
__init symbols. Kbuild warns about this:
WARNING: drivers/clk/sunxi/built-in.o(.text+0x15f0): Section mismatch in reference from the function sun6i_a31_ar100_clk_probe() to the (unknown reference) .init.rodata:(unknown)
The function sun6i_a31_ar100_clk_probe() references
the (unknown reference) __initconst (unknown).
This is often because sun6i_a31_ar100_clk_probe lacks a __initconst
annotation or the annotation of (unknown) is wrong.
Removing the __initconst annotation avoids the warning and makes
deferred probing work.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 3ca2377b6f ("clk: sunxi: rewrite sun6i-ar100 using factors clk")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A83T has similar bus gates that of H3, including single gating register has
different clock parent.
As per H3 and A83T datasheet, usbhost is under AHB2.
However,below shows allwinner source code assignment:
bits: 26 (ehci0), 27 (ehci1), 29 (ohci0) => AHB1 for A83T.
bits: 26 (ehci0), 27 (ehci1) => AHB1 for H3
bits 29, 30, 31(ohci0,1,2) => AHB2 for H3.
until, this confusion is cleared keep it H3 way.
Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
APB0 is part of PRCM, and is compatible with earlier SOCs.
apb0 gates controls R_PIO, R_UART, R_RSB, etc clocks.
This patch adds support for APB0 gates for A83T.
Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun8i-a23-mbus-clk used sunxi's factors clk, which is nice for very
complicated clocks, but is not really needed here.
Convert sun8i-a23-mbus-clk to use clk_composite, as it is a gate + mux
+ divider. This makes the code easier to understand.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The factors clk implementation has been extended to support custom
recalc callbacks to support clocks that use one factor for certain
parents only, like a pre-divider.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The common clock framework requires either determine_rate or round_rate
to be implemented. We use determine_rate so we can pass the parent index
to the get_factors callback. This cannot be done easily with round_rate,
so just drop it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Some clocks cannot be modelled using the standard factors clk formula,
such as clocks with special pre-dividers on one parent, or clocks
with all power-of-two dividers.
Add support for a custom .recalc callback for factors clk. Also pass
the current parent index to the .get_factor and .recalc callbacks.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The .get_factors callback of factors_clk has 6 parameters. To extend
factors_clk in any way that requires adding parameters to .get_factors
would make that list even longer, not to mention changing all the
function declarations.
Do this once now and consolidate all the parameters into a struct.
Also drop the space before function pointer arguments, since checkpatch
complains.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sunxi's factors clk did not have an unregister function. This means
multiple structs were leaked whenever a factors clk was unregistered.
Add an unregister function for it. Also keep pointers to the mux and
gate structs so they can be freed.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sunxi_factors_register() does not check for failures or cleanup after
clk_register_composite() or other clk-related calls.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
struct clk_factors_config contains shifts/widths for the factors of
the factors clk. This is used to read out the factors from the register
value. In no case is it written to, so make it const.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The latest addition of H3 USB clocks placed them at the bottom. Move it
before A80 (sun9i), so they are sorted by SoC family then name.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Arnd Bergmann
Rob Herring
Stephen Boyd
Stéphan Rafin
Julia Lawall
Ricardo Ribalda Delgado
Wei Yongjun
Michael Turquette
Paul Gortmaker
Maxime Ripard
Jens Kuske
Vaishali Thakkar
Jean-Francois Moine
Andrea Venturi
Philipp Zabel
Krzysztof Adamski
Andre Przywara
Chen-Yu Tsai
Vishnu Patekar