Граф коммитов

107 Коммитов

Автор SHA1 Сообщение Дата
Masahiro Yamada a92359aa6d ia64: syscalls: switch to generic syscalltbl.sh
Many architectures duplicate similar shell scripts.

This commit converts ia64 to use scripts/syscalltbl.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25 05:25:40 +09:00
Christian Brauner ddb815bd54
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
This is part of a larger series that aims at getting rid of the
copy_thread()/copy_thread_tls() split that makes the process creation
codepaths in the kernel more convoluted and error-prone than they need
to be.
I'm converting all the remaining arches that haven't yet switched and
am collecting individual acks. Once I have them, I'll send the whole series
removing the copy_thread()/copy_thread_tls() split, the
HAVE_COPY_THREAD_TLS define and the legacy do_fork() helper. The only
kernel-wide process creation entry point for anything not going directly
through the syscall path will then be based on struct kernel_clone_args.
No more danger of weird process creation abi quirks between architectures
hopefully, and easier to maintain overall.
It also unblocks implementing clone3() on architectures not support
copy_thread_tls(). Any architecture that wants to implement clone3()
will need to select HAVE_COPY_THREAD_TLS and thus need to implement
copy_thread_tls(). So both goals are connected but independently
beneficial.

HAVE_COPY_THREAD_TLS means that a given architecture supports
CLONE_SETTLS and not setting it should usually mean that the
architectures doesn't implement it but that's not how things are. In
fact all architectures support CLONE_TLS it's just that they don't
follow the calling convention that HAVE_COPY_THREAD_TLS implies. That
means all architectures can be switched over to select
HAVE_COPY_THREAD_TLS. Once that is done we can remove that macro (yay,
less code), the unnecessary do_fork() export in kernel/fork.c, and also
rename copy_thread_tls() back to copy_thread(). At this point
copy_thread() becomes the main architecture specific part of process
creation but it will be the same layout and calling convention for all
architectures. (Once that is done we can probably cleanup each
copy_thread() function even more but that's for the future.)

Since ia64 does support CLONE_SETTLS there's no reason to not select
HAVE_COPY_THREAD_TLS. This brings us one step closer to getting rid of
the copy_thread()/copy_thread_tls() split we still have and ultimately
the HAVE_COPY_THREAD_TLS define in general. A lot of architectures have
already converted and ia64 is one of the few hat haven't yet. This also
unblocks implementing the clone3() syscall on ia64. Once that is done we
can get of another ARCH_WANTS_* macro.

Once Any architecture that supports HAVE_COPY_THREAD_TLS cannot call the
do_fork() helper anymore. This is fine and intended since it should be
removed in favor of the new, cleaner _do_fork() calling convention based
on struct kernel_clone_args. In fact, most architectures have already
switched.  With this patch, ia64 joins the other arches which can't use
the fork(), vfork(), clone(), clone3() syscalls directly and who follow
the new process creation calling convention that is based on struct
kernel_clone_args which we introduced a while back. This means less
custom assembly in the architectures entry path to set up the registers
before calling into the process creation helper and it is easier to to
support new features without having to adapt calling conventions. It
also unifies all process creation paths between fork(), vfork(),
clone(), and clone3(). (We can't fix the ABI nightmare that legacy
clone() is but we can prevent stuff like this happening in the future.)

Well, the first version I nothing to test this with. I don't know how to
reasonably explain what happened but thanks to Adrian I'm now sitting at
home next to a HP Integrity RX2600. I've done some testing and my initial
version had a bug that became obvious when I took a closer look. The switch
stack logic assumes that ar.pfs is stored in r16 and I changed that to r2.
So with that fixed the following test program runs without any problems:

 #ifndef _GNU_SOURCE
 #define _GNU_SOURCE 1
 #endif
 #include <errno.h>
 #include <fcntl.h>
 #include <linux/sched.h>
 #include <sched.h>
 #include <signal.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <sys/stat.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 #include <syscall.h>
 #include <unistd.h>

 #define IA64_SYSCALL_OFFSET 1024
 #ifndef __NR_clone
 #define __NR_clone (104 + IA64_SYSCALL_OFFSET)
 #endif

 #ifndef __NR_clone2
 #define __NR_clone2 (189 + IA64_SYSCALL_OFFSET)
 #endif

 /*
  * sys_clone(unsigned long flags,
  *	     unsigned long stack,
  *	     int *parent_tidptr,
  *	     int *child_tidptr,
  *	     unsigned long tls)
  */
 static pid_t ia64_raw_clone(void)
 {
 	return syscall(__NR_clone, SIGCHLD, 0, NULL, NULL, 0);
 }

 /*
  * sys_clone2(unsigned long flags,
  *	      unsigned long stack,
  *	      unsigned long stack_size,
  *	      int *parent_tidptr,
  *	      int *child_tidptr,
  *	      unsigned long tls)
  */
 static pid_t ia64_raw_clone2(void)
 {
 	return syscall(__NR_clone2, SIGCHLD, 0, 0, NULL, NULL, 0);
 }

 /*
  * Let's use the "standard stack limit" (i.e. glibc thread size default) for
  * stack sizes: 8MB.
  */
 #define __STACK_SIZE (8 * 1024 * 1024)

 /* This is not always defined in sched.h. */
 extern int __clone2 (int (*__fn) (void *__arg), void *__child_stack_base,
                      size_t __child_stack_size, int __flags, void *__arg, ...);

 pid_t libc_clone2(int (*fn)(void *), void *arg)
 {
 	pid_t ret;
 	void *stack;

 	stack = malloc(__STACK_SIZE);
 	if (!stack)
 		return -ENOMEM;

 	 return __clone2(fn, stack, __STACK_SIZE, SIGCHLD, arg, NULL, NULL, NULL);
 }

 static int libc_clone2_child(void *data)
 {
 	fprintf(stderr, "I'll just see myself out\n");
 	_exit(EXIT_SUCCESS);
 }

 int main(void)
 {
 	for (int i = 0; i < 1000; i++) {
 		pid_t pid = ia64_raw_clone();
 		if (pid < 0)
 			_exit(EXIT_FAILURE);

 		if (pid == 0)
 			_exit(EXIT_SUCCESS);

 		if (wait(NULL) != pid)
 			_exit(EXIT_FAILURE);
 		fprintf(stderr, "ia64_raw_clone() passed\n");

 		pid = ia64_raw_clone2();
 		if (pid < 0)
 			_exit(EXIT_FAILURE);

 		if (pid == 0)
 			_exit(EXIT_SUCCESS);

 		if (wait(NULL) != pid)
 			_exit(EXIT_FAILURE);
 		fprintf(stderr, "ia64_raw_clone2() passed\n");

 		pid = libc_clone2(libc_clone2_child, NULL);
 		if (pid < 0)
 			_exit(EXIT_FAILURE);

 		if (wait(NULL) != pid)
 			_exit(EXIT_FAILURE);
 		fprintf(stderr, "libc_clone2() passed\n");
 	}

 	_exit(EXIT_SUCCESS);
 }

For some more context, please see:
commit 606e9ad200
Merge: ac61145a72 457677c70c
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Sat Jan 11 15:33:48 2020 -0800

    Merge tag 'clone3-tls-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

    Pull thread fixes from Christian Brauner:
     "This contains a series of patches to fix CLONE_SETTLS when used with
      clone3().

      The clone3() syscall passes the tls argument through struct clone_args
      instead of a register. This means, all architectures that do not
      implement copy_thread_tls() but still support CLONE_SETTLS via
      copy_thread() expecting the tls to be located in a register argument
      based on clone() are currently unfortunately broken. Their tls value
      will be garbage.

      The patch series fixes this on all architectures that currently define
      __ARCH_WANT_SYS_CLONE3. It also adds a compile-time check to ensure
      that any architecture that enables clone3() in the future is forced to
      also implement copy_thread_tls().

      My ultimate goal is to get rid of the copy_thread()/copy_thread_tls()
      split and just have copy_thread_tls() at some point in the not too
      distant future (Maybe even renaming copy_thread_tls() back to simply
      copy_thread() once the old function is ripped from all arches). This
      is dependent now on all arches supporting clone3().

      While all relevant arches do that now there are still four missing:
      ia64, m68k, sh and sparc. They have the system call reserved, but not
      implemented. Once they all implement clone3() we can get rid of
      ARCH_WANT_SYS_CLONE3 and HAVE_COPY_THREAD_TLS.

Note that in the meantime, m68k has already switched to the new calling
convention. And I've got sparc patches acked by Dave, too.

Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Qais Yousef <qais.yousef@arm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200517151635.3085756-1-christian.brauner@ubuntu.com
2020-06-23 10:49:56 +02:00
Mike Rapoport 65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Thomas Gleixner b9b75e53b2 sched/rt, ia64: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.

Switch the entry code and kprobes over to use CONFIG_PREEMPTION.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-10-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-08 14:37:33 +01:00
Firoz Khan c51836246f ia64: generate uapi header and system call table files
System call table generation script must be run to gener-
ate unistd_64.h and syscall_table.h files. This patch will
have changes which will invokes the script.

This patch will generate unistd_64.h and syscall_table.h
files by the syscall table generation script invoked by
ia64/Makefile and the generated files against the removed
files must be identical.

The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/entry.S file.

Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-11-13 08:56:25 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ingo Molnar 2c873d55cd sched/core: Remove unused prefetch_stack()
prefetch_stack() is defined by IA64, but not actually used anywhere anymore.

Remove it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-03 01:45:38 +01:00
Al Viro e007c53397 ia64: move exports to definitions
Here we have another kind of deviation from the default case -
a difference between exporting functions and non-functions.
EXPORT_DATA_SYMBOL... is really different from EXPORT_SYMBOL...
on ia64, and we need to use the right one when moving exports
from *.c where C compiler has the required information to
*.S, where we need to supply it manually.

parisc64 will be another one like that.

Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-08-07 23:55:50 -04:00
Tony Luck 2d5ae5c2c7 [IA64] Enable preadv2 and pwritev2 syscalls for ia64
New system calls added in:
      f17d8b3545
      vfs: vfs: Define new syscalls preadv2,pwritev2

Signed-off-by: Tony Luck <tony.luck@intel.com>
2016-03-25 14:37:32 -07:00
Tony Luck 884a12a597 [IA64] Enable copy_file_range syscall for ia64
New system call added in:
  29732938a6
  vfs: add copy_file_range syscall and vfs helper

Signed-off-by: Tony Luck <tony.luck@intel.com>
2016-01-22 14:20:01 -08:00
Tony Luck 2780188515 [IA64] Enable mlock2 syscall for ia64
New system call added in
  commit a8ca5d0ecb
  mm: mlock: add new mlock system call

Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-12-14 10:30:02 -08:00
Émeric MASCHINO d305c47734 [IA64] Wire up kcmp syscall
systemd > 218 fails to compile on ia64 with:

     error: ‘__NR_kcmp’ undeclared [1].

I've been told that this is because the kcmp syscall hasn't been wired up
for the ia64 arch [2].

The proposed patch thus wire up the kcmp syscall for the ia64 arch.

[1] https://bugs.gentoo.org/show_bug.cgi?id=560492
[2] https://bugs.gentoo.org/show_bug.cgi?id=560492#c17

Signed-off-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-10-28 14:22:59 -07:00
Luck, Tony 865ca084fd ia64: Enable userfaultfd and membarrier system calls
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-15 16:22:45 -07:00
Luis R. Rodriguez e55645ec57 ia64: remove paravirt code
All the ia64 pvops code is now dead code since both
xen and kvm support have been ripped out [0] [1]. Just
that no one had troubled to rip this stuff out. The only
useful remaining pieces were the old pvops docs but that
was recently also generalized and moved out from ia64 [2].

This has been run time tested on an ia64 Madison system.

[0] 003f7de625 "KVM: ia64: remove" since v3.19-rc1
[1] d52eefb47d "ia64/xen: Remove Xen support for ia64" since v3.14-rc1
[2] "virtual: Documentation: simplify and generalize paravirt_ops.txt"

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-06-10 14:26:32 -07:00
Tony Luck b739896dd2 [IA64] Enable execveat syscall for ia64
See commit 51f39a1f0c
    syscalls: implement execveat() system call

Signed-off-by: Tony Luck <tony.luck@intel.com>
2015-01-05 11:25:19 -08:00
Tony Luck 5dab4b73c7 [IA64] Enable bpf syscall for ia64
See commit 99c55f7d47
   bpf: introduce BPF syscall and maps

Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-10-09 13:36:10 -07:00
Tony Luck 703e6a6ed6 [IA64] Wire up memfd_create() system call
Yet another system call. This one added by:

   commit 9183df25fe
   shm: add memfd_create() syscall

Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-08-18 10:29:52 -07:00
Tony Luck 5e467e27b7 [IA64] Wire up getrandom() system call
See commit c6e9d6f388
    random: introduce getrandom(2) system call

for all the details (and even a manual page!)

Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-08-06 14:37:12 -07:00
Miklos Szeredi 3ca976a2cf ia64: add renameat2 syscall
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Tony Luck <tony.luck@intel.com>
2014-05-20 10:59:38 +02:00
Tony Luck 7de8246eba [IA64] Wire up new sched_setattr and sched_getattr syscalls
New syscalls for v3.14

Signed-off-by: Tony Luck <tony.luck#intel.com>
2014-01-28 09:52:53 -08:00
Thomas Gleixner aa0d532605 ia64: Use preempt_schedule_irq
Use the proper core function instead of fiddling with PREEMPT_ACTIVE
and enable/disable interrupts in the low level code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Link: http://lkml.kernel.org/r/20130917183628.857145384@linutronix.de
2013-11-13 20:21:47 +01:00
Frederic Weisbecker abf917cd91 cputime: Generic on-demand virtual cputime accounting
If we want to stop the tick further idle, we need to be
able to account the cputime without using the tick.

Virtual based cputime accounting solves that problem by
hooking into kernel/user boundaries.

However implementing CONFIG_VIRT_CPU_ACCOUNTING require
low level hooks and involves more overhead. But we already
have a generic context tracking subsystem that is required
for RCU needs by archs which plan to shut down the tick
outside idle.

This patch implements a generic virtual based cputime
accounting that relies on these generic kernel/user hooks.

There are some upsides of doing this:

- This requires no arch code to implement CONFIG_VIRT_CPU_ACCOUNTING
if context tracking is already built (already necessary for RCU in full
tickless mode).

- We can rely on the generic context tracking subsystem to dynamically
(de)activate the hooks, so that we can switch anytime between virtual
and tick based accounting. This way we don't have the overhead
of the virtual accounting when the tick is running periodically.

And one downside:

- There is probably more overhead than a native virtual based cputime
accounting. But this relies on hooks that are already set anyway.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-27 19:23:27 +01:00
Luck, Tony 062fe95afe Wire up finit_module syscall
Linux was granted a new system call to load modules by file descriptor
in commit 34e1169d99 ("module: add syscall to load module from fd").

Wire it up for ia64 (ready for the Chrome port :-)

Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-03 10:57:23 -08:00
Al Viro e80d6661c3 flagday: kill pt_regs argument of do_fork()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-29 00:01:08 -05:00
Al Viro 71b4ecc3d8 ia64: switch to generic sys_execve()
Acked-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-19 14:28:40 -04:00
Al Viro 54d496c391 ia64: switch to generic kernel_thread()/kernel_execve()
Acked-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-19 14:28:09 -04:00
Al Viro a8b8f66250 ia64: clone() had been unused since 2004
Used to be used by kernel_thread(); dead code for 8 years...
Note that it's not sys_clone/sys_clone2 - those are used just
fine.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-14 19:33:53 -04:00
Émeric Maschino 65cc21b452 ia64: Add accept4() syscall
While debugging udev > 170 failure on Debian Wheezy
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648325), it appears
that the issue was in fact due to missing accept4() in ia64.

This patch simply adds accept4() to ia64.

Signed-off-by: Émeric Maschino <emeric.maschino@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-09 12:55:10 -08:00
Tony Luck 5569459cd3 [IA64] Wire up cross memory attach syscalls
Add sys_process_vm_readv and sys_process_vm_writev to ia64
syscall table. Passes tests at http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgz

Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-11-02 14:00:26 -07:00
NeilBrown f5b9409973 All Arch: remove linkage for sys_nfsservctl system call
The nfsservctl system call is now gone, so we should remove all
linkage for it.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-26 15:09:58 -07:00
Tony Luck 83caba8436 [IA64] wire up sendmmsg() syscall for Itanium
Add entries in unistd.h and entry.S to make this new syscall visible.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-05-31 10:09:24 -07:00
Eric W. Biederman 7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Tony Luck 9298168d16 [IA64] New syscalls for 2.6.39
Four new syscalls:
	sys_name_to_handle_at
	sys_open_by_handle_at
	sys_clock_adjtime
	sys_syncfs

Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-03-22 10:54:24 -07:00
Tony Luck a78b2de1e4 [IA64] Add latest crop of syscalls
Three new syscalls for 2.6.36: prlimit64, fanotify_init and
fanotify_mark.  Wire up the ia64 syscall table for them.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-13 20:55:51 -07:00
Tony Luck 32974ad490 [IA64] Remove COMPAT_IA32 support
This has been broken since May 2008 when Al Viro killed altroot support.
Since nobody has complained, it would appear that there are no users of
this code (A plausible theory since the main OSVs that support ia64 prefer
to use the IA32-EL software emulation).

Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-02-08 10:42:17 -08:00
Arnaldo Carvalho de Melo a2e2725541 net: Introduce recvmmsg socket syscall
Meaning receive multiple messages, reducing the number of syscalls and
net stack entry/exit operations.

Next patches will introduce mechanisms where protocols that want to
optimize this operation will provide an unlocked_recvmsg operation.

This takes into account comments made by:

. Paul Moore: sock_recvmsg is called only for the first datagram,
  sock_recvmsg_nosec is used for the rest.

. Caitlin Bestler: recvmmsg now has a struct timespec timeout, that
  works in the same fashion as the ppoll one.

  If the underlying protocol returns a datagram with MSG_OOB set, this
  will make recvmmsg return right away with as many datagrams (+ the OOB
  one) it has received so far.

. Rémi Denis-Courmont & Steven Whitehouse: If we receive N < vlen
  datagrams and then recvmsg returns an error, recvmmsg will return
  the successfully received datagrams, store the error and return it
  in the next call.

This paves the way for a subsequent optimization, sk_prot->unlocked_recvmsg,
where we will be able to acquire the lock only at batch start and end, not at
every underlying recvmsg call.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 23:40:10 -07:00
Tony Luck 97de6ad196 [IA64] hook up new rt_tgsigqueueinfo syscall
Assign syscall #1321 for rt_tgsigqueueinfo.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-16 13:13:41 -07:00
Tony Luck 8851d3712a [IA64] wire up preadv/pwritev system calls
Gerd Hoffmann added these to Linux.  Let ia64 use them.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-04-08 13:46:14 -07:00
Linus Torvalds 714f83d5d9 Merge branch 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits)
  tracing, net: fix net tree and tracing tree merge interaction
  tracing, powerpc: fix powerpc tree and tracing tree interaction
  ring-buffer: do not remove reader page from list on ring buffer free
  function-graph: allow unregistering twice
  trace: make argument 'mem' of trace_seq_putmem() const
  tracing: add missing 'extern' keywords to trace_output.h
  tracing: provide trace_seq_reserve()
  blktrace: print out BLK_TN_MESSAGE properly
  blktrace: extract duplidate code
  blktrace: fix memory leak when freeing struct blk_io_trace
  blktrace: fix blk_probes_ref chaos
  blktrace: make classic output more classic
  blktrace: fix off-by-one bug
  blktrace: fix the original blktrace
  blktrace: fix a race when creating blk_tree_root in debugfs
  blktrace: fix timestamp in binary output
  tracing, Text Edit Lock: cleanup
  tracing: filter fix for TRACE_EVENT_FORMAT events
  ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release()
  x86: kretprobe-booster interrupt emulation code fix
  ...

Fix up trivial conflicts in
 arch/parisc/include/asm/ftrace.h
 include/linux/memory.h
 kernel/extable.c
 kernel/module.c
2009-04-05 11:04:19 -07:00
Isaku Yamahata 94752a794d ia64/pv_ops: paravirtualize mov = ar.itc.
paravirtualize mov reg = ar.itc.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-26 10:50:22 -07:00
Ingo Molnar 4092762aeb Merge branch 'tracing/ftrace'; commit 'v2.6.29-rc2' into tracing/core 2009-01-18 20:15:05 +01:00
Heiko Carstens 1134723e96 [CVE-2009-0029] Remove __attribute__((weak)) from sys_pipe/sys_pipe2
Remove __attribute__((weak)) from common code sys_pipe implemantation.
IA64, ALPHA, SUPERH (32bit) and SPARC (32bit) have own implemantations
with the same name. Just rename them.
For sys_pipe2 there is no architecture specific implementation.

Cc: Richard Henderson <rth@twiddle.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:15 +01:00
Shaohua Li a14a07b801 ftrace, ia64: IA64 dynamic ftrace support
IA64 dynamic ftrace support.
The original _mcount stub for each function is like:
	alloc r40=ar.pfs,12,8,0
	mov r43=r0;;
	mov r42=b0
	mov r41=r1
	nop.i 0x0
	br.call.sptk.many b0 = _mcount;;

The patch convert it to below for nop:
	[MII] nop.m 0x0
	mov r3=ip
	nop.i 0x0
	[MLX] nop.m 0x0
	nop.x 0x0;;
This isn't completely nop, as there is one instuction 'mov r3=ip', but
it should be light and harmless for code follow it.

And below is for call
	[MII] nop.m 0x0
	mov r3=ip
	nop.i 0x0
	[MLX] nop.m 0x0
	brl.many .;;
In this way, only one instruction is changed to convert code between nop
and call. This should meet dyn-ftrace's requirement.
But this requires CPU support brl instruction, so dyn-ftrace isn't
supported for old Itanium system. Assume there are quite few such old
system running.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:31 +01:00
Shaohua Li d3e75ff14b ftrace, ia64: IA64 static ftrace support
IA64 ftrace suppport. In IA64, below code will be added in each function
if -pg is enabled.

alloc r40=ar.pfs,12,8,0
mov r43=r0;;
mov r42=b0
mov r41=r1
nop.i 0x0
br.call.sptk.many b0 = _mcount;;

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-14 12:11:26 +01:00
Tony Luck b704882e70 [IA64] Rationalize kernel mode alignment checking
Itanium processors can handle some misaligned data accesses. They
also provide a mode where all such accesses are forced to trap. The
kernel was schizophrenic about use of this mode:

* Base kernel code ran in permissive mode where the only traps
  generated were from those cases that the h/w could not handle.
* Interrupt, syscall and trap code ran in strict mode where all
  unaligned accesses caused traps to the 0x5a00 unaligned reference
  vector.

Use strict alignment checking throughout the kernel, but make
sure that we continue to let user mode use more relaxed mode
as the default.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-20 13:27:12 -08:00
Shaohua Li f14488ccfe [IA64] utrace use generic trace hook
Make IA64 use generic trace hook in some paths.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-06 10:43:06 -07:00
Tony Luck 3e4d0cab61 [IA64] Wire up new system calls
Six new system calls: signalfd4, eventfd2, epoll_create1,
dup3, pipe2 and inotify_init1.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-25 10:10:28 -07:00
Isaku Yamahata 4df8d22bbb [IA64] pvops: paravirtualize entry.S
paravirtualize ia64_swtich_to, ia64_leave_syscall and ia64_leave_kernel.
They include sensitive or performance critical privileged instructions
so that they need paravirtualization.
To paravirtualize them by single source and multi compile
they are converted into indirect jump. And define each pv instances.

Cc: Keith Owens <kaos@ocs.com.au>
Cc: "Dong, Eddie" <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-27 15:08:01 -07:00
Hidetoshi Seto 2e513fe490 [IA64] trivial cleanup for entry.S
This patch does:
 - make comment at next to resched check more robust
 - move "re-check" comments to next to where change predicate regs

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-14 15:56:09 -07:00