The GSI QP emulation requires also emulating completions for transmitted
MADs. The CQ on which these completions are generated can also be used by
the hardware, and the MAD layer is free to use any CQ of the device for the
GSI QP.
Add a method for generating software completions to each mlx5 CQ. Software
completions are polled first, and generate calls to the completion handler
callback if necessary.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Whenever the P_Key table is changed, we create the required GSI
transmission QPs on-demand.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to send GSI MADs on different P_Keys, mlx5 needs different QPs to
be created, each with a different P_Key set when the QP is modified to the
INIT state.
Create QPs for each non-zero P_Key in the P_Key table.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
mlx5 creates special GSI QPs that has limited ability to control the P_Key
of transmitted packets. The sent P_Key is taken from the QP object,
similarly to what happens with regular UD QPs.
Create a software wrapper around GSI QPs that with the following patches
will be able to emulate the functionality of a GSI QP including control of
the P_Key per work request.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add debugging prints to the modify QP verb to help understand the cause a
returned error.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to create multiple GSI QPs, we need to set the source QP number to
one on all these QPs. Add the necessary definitions and infrastructure to
do that.
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver checks the csum from the HW when completion arrived and marks
it in the wc->wc_flags field for the ulp drivers.
These is for packets from type IB_WC_RECV only.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support LSO and CSUM in the TX flow the driver does the
following:
* LSO bit for the enum mlx5_ib_qp_flags was added, indicates QP that
supports LSO offloads.
* Enables the special offload when the QP is created, and enable the
special work request id (IB_WR_LSO) when comes.
* Calculates the size of the WQE according to the new WQE format that
support these offloads.
* Handles the new WQE format when arrived, sets the relevant
fields, and copies the needed data.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify mlx5_ib_process_mad to use PPCNT and query_vport commands
instead of MAD_IFC, as MAD_IFC is deprecated on new firmware
versions (and doesn't support RoCE anyway).
Traffic counters exist in both 32-bit and 64-bit forms.
Declaring support of extended coutners results in traffic counters
to be read in their 64-bit form only via the query_vport command.
Error counters exist only in 32-bit form and read via PPCNT command.
This commit also adds counters support in RoCE.
Signed-off-by: Meny Yossefi <menyy@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In case of failure returned from query function in
IB device registration, we need to clean IB cache which
was missed.
This change fixes it.
Fixes: 3e153a93a1 ('IB/core: Save the device attributes on the device
structure')
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since the wait list is not protected against concurrent access
it must be processed from the context of the completion handler.
Replace the wait list processing code in the IB CM RTU callback
handler by code that triggers a completion handler. This patch
fixes the following rare crash:
WARNING: CPU: 2 PID: 78656 at lib/list_debug.c:53 __list_del_entry+0x67/0xd0()
list_del corruption, ffff88041ae404b8->next is LIST_POISON1 (dead000000000100)
Call Trace:
[<ffffffff81251c6b>] dump_stack+0x4f/0x74
[<ffffffff810574ab>] warn_slowpath_common+0x8b/0xd0
[<ffffffff81057591>] warn_slowpath_fmt+0x41/0x70
[<ffffffff8126f007>] __list_del_entry+0x67/0xd0
[<ffffffff8126f081>] list_del+0x11/0x40
[<ffffffffa0265242>] srpt_cm_handler+0x172/0x1a4 [ib_srpt]
[<ffffffffa0370370>] cm_process_work+0x20/0xf0 [ib_cm]
[<ffffffffa0370dae>] cm_establish_handler+0xbe/0x110 [ib_cm]
[<ffffffffa03733e7>] cm_work_handler+0x67/0xd0 [ib_cm]
[<ffffffff8107184d>] process_one_work+0x1bd/0x460
[<ffffffff81073148>] worker_thread+0x118/0x420
[<ffffffff81078444>] kthread+0xe4/0x100
[<ffffffff8151caff>] ret_from_fork+0x3f/0x70
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If an initiator observes LUN deletion during shutdown of the
target stack then that will trigger an I/O error even when using
multipathd. Users need a way to avoid that shutting down the
target stack causes I/O errors, e.g. by providing a way to force
initiator logout. Hence close all sessions if a target port is
disabled.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The only allowed return values for the write_pending() callback
function are 0, -EAGAIN and -ENOMEM. Since attempting to perform
RDMA over a disconnecting channel will result in an IB error
completion anyway, remove the code that checks the channel state
from srpt_write_pending().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Last WQE Reached event is only generated after one or more work
requests have been queued on the QP associated with a session. Since
session shutdown can start before any work requests have been queued,
use a zero-length RDMA write to wait until a QP has been drained.
Additionally, rework the code for closing and disconnecting a session.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In a later patch a function that can block will be called while
iterating over the rch_list. Hence protect that list with a
mutex instead of a spinlock. And since it is not allowed to sleep
while the task state != TASK_RUNNING, convert the list test in
srpt_ch_list_empty() into a lockless test.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To make it possible to determine why an initiator sent a REJ,
log the private data associated with the received REJ packet.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the CM REQ message handler, store the channel pointer in
cm_id->context such that the function srpt_find_channel() is no
longer needed. Additionally, make the CM event messages more
informative.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Inline those CM callback functions that are only two lines long.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
srpt_abort_cmd() must not be called in state SRPT_STATE_DATA_IN. Issue
a warning if this occurs.
srpt_abort_cmd() must not invoke target_put_sess_cmd() for commands
in state SRPT_STATE_DONE because the srpt_abort_cmd() callers already
do this when necessary. Hence remove this call.
If an RDMA read fails the corresponding SCSI command must fail. Hence
add a transport_generic_request_failure() call.
Remove an incorrect srpt_abort_cmd() call from srpt_rdma_write_done().
Avoid that srpt_send_done() calls srpt_abort_cmd() for finished SCSI
commands.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The target core function that should be called if target_submit_cmd()
fails is target_put_sess_cmd(). Additionally, change the return type
of srpt_handle_cmd() from int into void.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that srpt_close_session() waits if it doesn't have to wait.
Additionally, increase the time during which srpt_close_session()
waits until closing a session has finished. This makes it easier
to detect session shutdown bugs.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The target core guarantees that shutdown_session() is only invoked
once per session. This means that the ib_srpt target driver doesn't
have to track whether or not shutdown_session() has been called.
Additionally, ensure that target_sess_cmd_list_set_waiting() is
called before target_wait_for_sess_cmds() by moving it into
srpt_release_channel_work().
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The only allowed channel state changes are those that change
the channel state into a state with a higher numerical value.
This allows to merge the functions srpt_set_ch_state() and
srpt_test_and_set_ch_state() into a single function.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Just like other target drivers, use scsilun_to_int() to unpack SCSI
LUN numbers. This patch only changes the behavior of ib_srpt for LUN
numbers >= 16384.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the function target_reverse_dma_direction() instead of
reimplementing it.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The callers of srpt_get_ch_state() can access ch->state safely without
using locking. Hence inline this function.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
srpt_sdev_name() is too trivial to keep it as a separate function.
Hence inline this function.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since struct srpt_node_acl is identical to struct se_node_acl,
remove the definition of the former structure. This patch does
not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Estrin <alex.estrin@intel.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Although sizeof is an operator and hence in many cases parentheses can
be left out, the recommended kernel coding style is to surround the
sizeof argument with parentheses. This patch does not change any
functionality. It has been generated by running the following shell
command:
sed -i 's/sizeof \([^ );,]*\)/sizeof(\1)/g' drivers/infiniband/ulp/srpt/*.[ch]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Let the target core check task existence instead of the SRP target
driver. Additionally, let the target core check the validity of the
task management request instead of the ib_srpt driver.
This patch fixes the following kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
IP: [<ffffffffa0565f37>] srpt_handle_new_iu+0x6d7/0x790 [ib_srpt]
Oops: 0002 [#1] SMP
Call Trace:
[<ffffffffa05660ce>] srpt_process_completion+0xde/0x570 [ib_srpt]
[<ffffffffa056669f>] srpt_compl_thread+0x13f/0x160 [ib_srpt]
[<ffffffff8109726f>] kthread+0xcf/0xe0
[<ffffffff81613cfc>] ret_from_fork+0x7c/0xb0
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Fixes: 3e4f574857 ("ib_srpt: Convert TMR path to target_submit_tmr")
Tested-by: Alex Estrin <alex.estrin@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support to create RoCE-v2 compatible AH. It uses ahid
field to tell network-header-type to user space library. The library
has to decode network-header-type from ahid field.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch implements following changes to support RoCE-v2
in the RC path:
* Get the GID-type for a given sgid.
* Based on the GID-type get IPv4/IPv6 L3-address
and give those to underlying device.
* Resolve and provide network header type to device.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds following changes to support RoCE-v2
in the UD path.
* During AH creation GID-type is resolved for a given gid-index.
* Based on GID-type protocol header is built.
* Work completion reports network header type and set
IB_WC_WITH_NETWORK_HDR_TYPE flag in wc->wc_flags to indicate
that the network header type is valid.
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to read device configuration and initialize port-immutables
to report UDP-Encap flag during port query.
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Somnath Kotur <somnath.kotur@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since create_singlethread_workqueue uses kzalloc internally,
it can fail when the system is under memory pressure, so need
to handle it.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Reviewed-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Doug Ledford <dledford@redhat.com>
GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support for receiving multicast/unicast traffic with
the don't trap rule.
Sniffing these packets requires a flow steering rule of type NORMAL
at priority 0 with flag IB_FLOW_ATTR_FLAGS_DONT_TRAP set.
Choosing between multicast or unicast is done via ethernet L2 dest_mac
mask and value:
- If mask is all zeros - unicast and multicast are set.
- If mask non zero - only mask with multicast bit 1 and rest 0 is
supported, the mac value will choose if it is
multicast or unicast rule.
If the mask multicast bit is on and some other bits are on too, it means
a request for specific multicast or unicast, this is not supported,
either receive all multicast or all unicast.
Only when limitations are met registered QP will receive requested type
but other QPs can receive same traffic if registered for it.
Otherwise, if limitations are not met, an error will be returned.
Limitations:
- Rule must be with priority 0.
- A0 mode is not supported.
- Sniffer QP cannot appear in any other flow steering rule.
Signed-off-by: Marina Varshaver <marinav@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don't trap flag (i.e. IB_FLOW_ATTR_FLAGS_DONT_TRAP) indicates that QP
will receive traffic, but will not steal it.
When a packet matches a flow steering rule that was created with
the don't trap flag, the QPs assigned to this rule will get this
packet, but matching will continue to other equal/lower priority
rules. This will let other QPs assigned to those rules to get the
packet too.
If both don't trap rule and other rules have the same priority
and match the same packet, the behavior is undefined.
The don't trap flag can't be set with default rule types
(i.e. IB_FLOW_ATTR_ALL_DEFAULT, IB_FLOW_ATTR_MC_DEFAULT) as default rules
don't have rules after them and don't trap has no meaning here.
Signed-off-by: Marina Varshaver <marinav@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wall time obtained from ktime_get_real_ns is susceptible to sudden jumps due to
user setting the time or due to NTP. Boot time is constantly increasing time
better suited for comparing two timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_verbs.[ch] are to handle iwarp interface.
Changes since v2:
Made infiniband interface changes for 4.5
removed i40iw_reg_phys_mr() for 4.5
made changes as made by Christoph Hellwig made for nes
in i40iw_get_dma_mr().
Changes since v1:
Following modification based on Christoph Hellwig's feedback
-remove kmap() calls and moved to i40iw_cm.c.
-cleanup some of casts
Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_hw.c, i40iw_utils.c and i40iw_osdep.h are files to handle
interrupts and processing.
Changes since v1:
Cleanup/removed some macros reported by Christoph Hellwig.
Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_hmc.[ch] are to manage hmc for the device.
Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_cm.c i40iw_cm.h are used for connection management.
changes since v2:
Implemented interface changes as reg_phys_mr() is
not part of inifiniband interface Done as
Christoph Hellwig <hch@infradead.org> did for nes.
Changes since v1:
improved casts
moved kmap() from i40iw_verbs.c to make them short
lived.
Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
i40iw_main.c contains routines for i40e <=> i40iw interface and setup.
i40iw.h is header file for main device data structures.
i40iw_status.h is for return status codes.
Changes from v2:
more cast improvement
fixed timing issue during unload
added paramater change call from i40e
Changes from v1:
improved casting issues
do not print error using pr_err
change from bits to bool in i40iw_cqp_request{}
Acked-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add completion objects, named sq_drained and rq_drained, to the c4iw_qp
struct. The queue-specific completion object is signaled when the last
CQE is drained from the CQ for that queue.
Add c4iw_drain_sq() to block until qp->rq_drained is completed.
Add c4iw_drain_rq() to block until qp->sq_drained is completed.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add provider-specific drain_sq/drain_rq functions for providers needing
special drain logic.
Add static functions __ib_drain_sq() and __ib_drain_rq() which post noop
WRs to the SQ or RQ and block until their completions are processed.
This ensures the applications completions for work requests posted prior
to the drain work request have all been processed.
Add API functions ib_drain_sq(), ib_drain_rq(), and ib_drain_qp().
For the drain logic to work, the caller must:
ensure there is room in the CQ(s) and QP for the drain work request
and completion.
allocate the CQ using ib_alloc_cq() and the CQ poll context cannot be
IB_POLL_DIRECT.
ensure that there are no other contexts that are posting WRs concurrently.
Otherwise the drain is not guaranteed.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The cxgb4 prints an MMIO resource using the "0x%x" and "%p" format
strings on the length and start, respective, but that
triggers a compiler warning when using a 64-bit resource_size_t
on a 32-bit architecture:
drivers/infiniband/hw/cxgb4/device.c: In function 'c4iw_rdev_open':
drivers/infiniband/hw/cxgb4/device.c:807:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
(void *)pci_resource_start(rdev->lldi.pdev, 2),
This changes the format string to use %pR instead, which pretty-prints
the resource, avoids the warning and is shorter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The max depth of a fastreg mr depends on whether the device supports
DSGL or not. So compute it dynamically based on the device support and
the module use_dsgl option.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This series provides support for iWARP applications to specify a TOS
value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections.
In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based
on the tos value in the cm_id. Also pass the correct tos value during
connection setup so the passive side gets the client's desired tos.
When sending the FLOWC work request to FW, if the egress device is
in a vlan, then use the vlan priority bits as the scheduling class.
This allows associating RDMA connections with scheduling classes to
provide traffic shaping per flow.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Don't log errors if a listening endpoint is going away when procesing a
PASS_ACCEPT_REQ message. This can happen. Change the error printk to
a PDBG() debug log entry
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename local mm* variables to more meaningful names
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All the device physical port access functions are implemented in the
port.c file.
We just extract the exposure of these functions from driver.h into a
dedicated header file called port.h.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
problem description:
The current code sets UAR page size equal to system page size.
The ConnectX-3 and ConnectX-3 Pro HWs require minimum 128 UAR pages.
The mlx4 kernel drivers are not loaded if there is less than 128 UAR pages.
solution:
Always set UAR page to 4KB. This allows more UAR pages if the OS
has PAGE_SIZE larger than 4KB. For example, PowerPC kernel use 64KB
system page size, with 4MB uar region, there are 4MB/2/64KB = 32
uars (half for uar, half for blueflame). This does not meet minimum 128
UAR pages requirement. With 4KB UAR page, there are 4MB/2/4KB = 512 uars
which meet the minimum requirement.
Note that only codes in mlx4_core that deal with firmware know that uar
page size is 4KB. Codes that deal with usr page in cq and qp context
(mlx4_ib, mlx4_en and part of mlx4_core) still have the same assumption
that uar page size equals to system page size.
Note that with this implementation, on 64KB system page size kernel, there
are 16 uars per system page but only one uars is used. The other 15
uars are ignored because of the above assumption.
Regarding SR-IOV, mlx4_core in hypervisor will set the uar page size
to 4KB and mlx4_core code in virtual OS will obtain the uar page size from
firmware.
Regarding backward compatibility in SR-IOV, if hypervisor has this new code,
the virtual OS must be updated. If hypervisor has old code, and the virtual
OS has this new code, the new code will be backward compatible with the
old code. If the uar size is big enough, this new code in VF continues to
work with 64 KB uar page size (on PowerPc kernel). If the uar size does not
meet 128 uars requirement, this new code not loaded in VF and print the same
error message as the old code in Hypervisor.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report that driver supports IB_PMA_CLASS_CAP_EXT_WIDTH in respond for
IB_MGMT_CLASS_PERF_MGMT mad with IB_PMA_CLASS_PORT_INFO attr id.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When attribute IB_PMA_PORT_COUNTERS_EXT is set, we now return 64 bit
values for the counters.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Today ocrdma driver defer arming the CQ till poll is called.
This was used to prevent calling poll-cq on an armed CQ.
Recently a set of new CQ API has been introduced into the linux
kernel. The implementation of this API guarantees that a given
CQ is never armed before calling poll on it. Most of the kernel
ULPs have already moved to use this new API or have a code where
poll is called before arming the CQ.
Thus, the above workaround in ocrdma is not needed anymore.
This patch removes the additional logic to deffer arm till poll
is called. This patch adds a simple scheme where ib_req_notify_cq()
will actually arm the cq.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We will soon modify the vanilla get_user_pages() so it can no
longer be used on mm/tasks other than 'current/current->mm',
which is by far the most common way it is called. For now,
we allow the old-style calls, but warn when they are used.
(implemented in previous patch)
This patch switches all callers of:
get_user_pages()
get_user_pages_unlocked()
get_user_pages_locked()
to stop passing tsk/mm so they will no longer see the warnings.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: jack@suse.cz
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For protection keys, we need to understand whether protections
should be enforced in software or not. In general, we enforce
protections when working on our own task, but not when on others.
We call these "current" and "remote" operations.
This patch introduces a new get_user_pages() variant:
get_user_pages_remote()
Which is a replacement for when get_user_pages() is called on
non-current tsk/mm.
We also introduce a new gup flag: FOLL_REMOTE which can be used
for the "__" gup variants to get this new behavior.
The uprobes is_trap_at_addr() location holds mmap_sem and
calls get_user_pages(current->mm) on an instruction address. This
makes it a pretty unique gup caller. Being an instruction access
and also really originating from the kernel (vs. the app), I opted
to consider this a 'remote' access where protection keys will not
be enforced.
Without protection keys, this patch should not change any behavior.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: jack@suse.cz
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210154.3F0E51EA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fix spelling typos found in printk and Kconfig.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the RC QPs send queue overhead computation to take into account
two additional segments in the WQE which are needed for registration
operations.
The ATOMIC and UMR segments can't coexist together, so chose maximum out
of them.
The commit 9e65dc371b ("IB/mlx5: Fix RC transport send queue overhead
computation") was intended to update RC transport as commit messages
states, but added the code to UC transport.
Fixes: 9e65dc371b ("IB/mlx5: Fix RC transport send queue overhead computation")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A narrow window for race condition still exist between
multicast join thread and *dev_flush workers.
A kernel crash caused by prolong erratic link state changes
was observed (most likely a faulty cabling):
[167275.656270] BUG: unable to handle kernel NULL pointer dereference at
0000000000000020
[167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib]
[167275.674443] PGD 0
[167275.677373] Oops: 0000 [#1] SMP
...
[167275.977530] Call Trace:
[167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib]
[167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490
[ib_ipoib]
[167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470
[167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400
[167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400
[167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0
Here was a hit spot:
ipoib_mcast_join() {
..............
rec.qkey = priv->broadcast->mcmember.qkey;
^^^^^^^
.....
}
Proposed patch should prevent multicast join task to continue
if link state change is detected.
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Changes from v4:
- as suggested by Doug Ledford, optimized spinlock usage,
i.e. ipoib_mcast_join() is called with lock held.
Changes from v3:
- sync with priv->lock before flag check.
Chages from v2:
- Move check for OPER_UP flag state to mcast_join() to
ensure no event worker is in progress.
- minor style fixes.
Changes from v1:
- No need to lock again if error detected.
Signed-off-by: Doug Ledford <dledford@redhat.com>
When checking specific attribute from a bit mask, need to use bitwise
AND and not logical AND, fixed that.
Fixes: 145d9c5410 ('IB/core: Display extended counter set if
available')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This series provides support for iWARP applications to specify a TOS
value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections.
In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based
on the tos value in the cm_id. Also pass the correct tos value during
connection setup so the passive side gets the client's desired tos.
When sending the FLOWC work request to FW, if the egress device is
in a vlan, then use the vlan priority bits as the scheduling class.
This allows associating RDMA connections with scheduling classes to
provide traffic shaping per flow.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't log errors if a listening endpoint is going away when procesing a
PASS_ACCEPT_REQ message. This can happen. Change the error printk to
a PDBG() debug log entry
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename local mm* variables to more meaningful names
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the ocrdma device remove sequence, the debugfs directory
tree of each ocrdma device needs to be removed. Use
debugfs_remove_recursive instead of debugfs_remove.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently returning the pkey value instead of pkey index.
pkey index is always zero since ocrdma supports only default
pkey.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
max_sge_rd is used by some of the ULPs to calculate the maximum
number of SGEs that can be used for RDMA READ. Populating this
value in the response of query_device verb. Also, avoid checking
the max_srq_sge while populating max_sge.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the latest kernel, process_mad hook of the driver can be invoked as
soon as device is registered. In this hook, ocrdma driver is issuing a
command to get the stats counters from the HW. This is triggering system
crash since the statistics command resources are not allocated by the driver.
Changing the sequence of initialization to avoid this crash.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
_show_port_gid_attr performs a va_end on some unused va_list args.
Clean this up by removing the args completely.
Fixes: 470be516a2 ("IB/core: Add gid attributes to sysfs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We are seeing this warning: at net/core/skbuff.c:4174
and before commit a44878d100 ("IB/ipoib: Use one linear skb in RX flow")
skb truesize was not being set when ipoib was using just one skb.
Removing this line avoids the warning when running tcp tests like iperf.
Fixes: a44878d100 ("IB/ipoib: Use one linear skb in RX flow")
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For GSI QP traffic, the count of the udp header bytes was missing from
the IPv6 header, fix that.
Fixes: 25f40220e5 ('IB/core: Initialize UD header structure with IP
and UDP headers')
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
MLX5_GET64 was used on end_padding_mode, which is a 2-bit field.
This is wrong as the calculated offset is incorrect. Using MLX5_GET
instead of MLX5_GET64 to fix that.
Fixes: 0fb2ed66a1 ('IB/mlx5: Add create and destroy functionality
for Raw Packet QP')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When a Raw Ethernet QP is created, a NULL pointer PD could be used.
Fixing that by only using the PD after validating it's valid.
smatch also reported this error:
drivers/infiniband/hw/mlx5/qp.c:1629 mlx5_ib_create_qp()
error: we previously assumed 'pd' could be null (see line 1616)
Fixes: 0fb2ed66a1 ('IB/mlx5: Add create and destroy functionality for Raw Packet QP')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Older libraries that don't have all the new req_v2 fields
should be able to work as well. Today, if the library uses v2, it
will fail to allocate context since the size of reqlen is smaller
than the req_v2 size.
Fix the validation to be with the original req_v2 size and not
the current.
Fixes: f72300c56c ('IB/mlx5: Expose CQE version to user-space')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx5_ib driver supports the extended create_cq and create_qp user
verbs. In the current mechanism, a vendor supporting an extended uverb
should set the appropriate bit in the uverbs_ex_cmd_mask field.
Adding the actual support by setting the required bits in order to
support features like completion time-stamping and cross-channel.
Fixes: 972ecb8213 ('IB/mlx5: Add create_cq extended command')
Fixes: ddf9529be1 ('IB/core: Allow setting create flags in QP init
attribute')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed through the
RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
acknowledged by Bruce)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5oO7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma updates from Doug Ledford:
"Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
ib_device struct
- Move iopoll out of block and into lib, rename to irqpoll, and use
in several places in the rdma stack as our new completion queue
polling library mechanism. Update the other block drivers that
already used iopoll to use the new mechanism too.
- Replace the per-entry GID table locks with a single GID table lock
- IPoIB multicast cleanup
- Cleanups to the IB MR facility
- Add support for 64bit extended IB counters
- Fix for netlink oops while parsing RDMA nl messages
- RoCEv2 support for the core IB code
- mlx4 RoCEv2 support
- mlx5 RoCEv2 support
- Cross Channel support for mlx5
- Timestamp support for mlx5
- Atomic support for mlx5
- Raw QP support for mlx5
- MAINTAINERS update for mlx4/mlx5
- Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
- Add support for remote invalidate to the iSER driver (pushed
through the RDMA tree due to dependencies, acknowledged by nab)
- Update to NFSoRDMA (pushed through the RDMA tree due to
dependencies, acknowledged by Bruce)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
IB/mlx5: Unify CQ create flags check
IB/mlx5: Expose Raw Packet QP to user space consumers
{IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
IB/mlx5: Add Raw Packet QP query functionality
IB/mlx5: Add create and destroy functionality for Raw Packet QP
IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
IB/mlx5: Allocate a Transport Domain for each ucontext
net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
net/mlx5_core: Add RQ and SQ event handling
net/mlx5_core: Export transport objects
IB/mlx5: Expose CQE version to user-space
IB/mlx5: Add CQE version 1 support to user QPs and SRQs
IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
IB/sa: Fix netlink local service GFP crash
IB/srpt: Remove redundant wc array
IB/qib: Improve ipoib UD performance
IB/mlx4: Advertise RoCE v2 support
IB/mlx4: Create and use another QP1 for RoCEv2
IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
...
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The create_cq() can receive creation flags which were used
differently by two commits which added create_cq extended
command and cross-channel. The merged code caused to not
accept any flags at all.
This patch unifies the check into one function and one return
error code.
Fixes: 972ecb8213 ("IB/mlx5: Add create_cq extended command")
Fixes: 051f263098 ("IB/mlx5: Add driver cross-channel support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Added Raw Packet QP modify functionality which will enable user
space consumers to use it.
Since Raw Packet QP is built of SQ and RQ sub-objects, therefore
Raw Packet QP state changes are implemented by changing the state
of the sub-objects.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When modifying a QP, the desired operation was determined in
the mlx5_core using a transition table that takes the current
state, the final state, and returns the desired operation.
Since this logic will be used for Raw Packet QP, move the
operation table to the mlx5_ib.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the user changes the Address Vector(AV) in the modify QP, he
provides an SL. This SL should be translated to Ethernet Priority
by taking the 3 LSB bits, and modify the QP's TIS according to this
Ethernet priority.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since Raw Packet QP is composed of RQ and SQ, the IB QP's
state is derived from the sub-objects. Therefore we need
to query each one of the sub-objects, and decide on the
IB QP's state.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support for Raw Packet QP for the mlx5 device.
Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.
Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Extract specific IB QP fields to mlx5_ib_qp_trans structure.
The mlx5_core QP object resides in mlx5_ib_qp_base, which all QP types
inherit from. When we need to find mlx5_ib_qp using mlx5_core QP
(event handling and co), we use a pointer that resides in
mlx5_ib_qp_base.
In addition, we delete all redundant fields that weren't used anywhere
in the code:
-doorbell_qpn
-sq_max_wqes_per_wr
-sq_spare_wqes
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Transport Domain groups several TIS and TIR object. By grouping
these object, it defines wheather local loopback packets that
are sent from the TIS objects in the group are received by the
TIR objects in the same group.
Allocate a Transport Domain(TD) for each user context to be used
in the future by Raw Packet QP for Self-Loopback Control.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Per user context, work with CQE version that both the user-space
and the kernel support. Report this CQE version via the response of
the alloc_ucontext command.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enforce working with CQE version 1 when the user supports CQE
version 1 and asked to work this way.
If the user still works with CQE version 0, then use the default
CQE version to tell the Firmware that the user still works in the
older mode.
After this patch, the kernel still reports CQE version 0.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The rdma netlink local service registers a handler to handle RESOLVE
response and another handler to handle SET_TIMEOUT request. The first
thing these handlers do is to call netlink_capable() to check the
access right of the received skb to make sure that the sender has root
access. Under normal conditions, such responses and requests will be
directly forwarded to the handlers without going through the netlink_dump
pathway (see ibnl_rcv_msg() in drivers/infiniband/core/netlink.c).
However, a user application could send a RESOLVE request (not response)
to the local service, which will fall into the netlink_dump pathway,
where a new skb will be created without initializing the control block.
This new skb will be eventually forwarded to the local service RESOLVE
response handler. Unfortunately, netlink_capable() will cause general
protection fault if the skb's control block is not initialized. This
patch will address the problem by checking the skb first.
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Introduce configfs support for unlocked configfs_depend_item()
(krzysztof + andrezej)
- Conversion of usb-gadget target driver to new function registration
interface (andrzej + sebastian)
- Enable qla2xxx FC target mode support for Extended Logins (himansu +
giridhar)
- Enable qla2xxx FC target mode support for Exchange Offload (himansu +
giridhar)
- Add qla2xxx FC target mode irq affinity notification + selective
command queuing. (quinn + himanshu)
- Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
nab)
- Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
proper se_session->sess_kref + target_get_session() usage. (hch +
sagi + nab)
- Fix long-standing race between se_node_acl->acl_kref get and
get_initiator_node_acl() lookup. (hch + nab)
- Fix target/user block-size handling, and make sure netlink reaches
all network namespaces (sheng + andy)
Note there is an outstanding bug-fix series for remote I_T nexus port
TMR LUN_RESET has been posted and still being tested, and will likely
become post -rc1 material at this point"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
scsi: qla2xxxx: avoid type mismatch in comparison
target/user: Make sure netlink would reach all network namespaces
target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
target: Convert ACL change queue_depth se_session reference usage
iscsi-target: Fix potential dead-lock during node acl delete
ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Wait for command completion before freeing a session
target: Fix a memory leak in target_dev_lba_map_store()
target: Support aborting tasks with a 64-bit tag
usb/gadget: Remove set-but-not-used variables
target: Remove an unused variable
target: Fix indentation in target_core_configfs.c
target/user: Allow user to set block size before enabling device
iser-target: Fix non negative ERR_PTR isert_device_get usage
target/fcoe: Add tag support to tcm_fc
qla2xxx: Check for online flag instead of active reset when transmitting responses
qla2xxx: Set all queues to 4k
qla2xxx: Disable ZIO at start time.
qla2xxx: Move atioq to a different lock to reduce lock contention
...
No usage after the conversion to the new CQ API.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Based on profiling, UD performance drops in case of processes
in a single client due to excess context switches when
the progress workqueue is scheduled.
This is solved by modifying the heuristic to select the
direct progress instead of the scheduling progress via
the workqueue when UD-like situations are detected in
the heuristic.
Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Advertise RoCE v2 support in port_immutable attributes according to
the hardware's capabilities. This enables the verbs stack to use
RoCE v2 mode.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The mlx4 driver uses a special QP to implement the GSI QP. This kind
of QP allows to build the InfiniBand headers in software.
When mlx4 hardware builds the packet, it calculates the ICRC and puts
it at the end of the payload. However, this ICRC calculation depends
on the QP configuration, which is determined when the QP is modified
(roce_mode during INIT->RTR).
When receiving a packet, the ICRC verification doesn't depend on this
configuration.
Therefore, using two GSI QPs for send (one for each RoCE version) and
one GSI QP for receive are required.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RoCEv2 packets are sent over IP/UDP protocols.
The mlx4 driver uses a type of RAW QP to send packets for QP1 and
therefore needs to build the network headers below BTH in software.
This patch adds option to build QP1 packets with IP and UDP headers if
RoCEv2 is requested.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the hardware supports RoCE v2, we configure the hardware UDP
port according to the RoCE v2 Annex when mlx4_ib device is added.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support modify_qp for RoCE v2, we need to set
the gid_type in the QP context.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB core driver adds a property of type to struct ib_gid_attr.
The mlx4 driver should take that in consideration when modifying or
querying the hardware gid table.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for
RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as
hop limit values.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and
downsteram patch will also add hop_limit as an output parameter,
thus we rename it to rdma_addr_find_l2_eth_by_grh.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse complains about dereference before check. Fixing this by
moving the check before the dereference.
Fixes: 200298326b ('IB/core: Validate route when we init ah')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When write_gid function needs to do a sleep-able operation, it unlocks
table->rwlock and then relocks it. Sparse complains about context
imbalance.
This is safe as write_gid is always called with table->rwlock.
write_gid protects from simultaneous writes to this GID entry
by setting the GID_TABLE_ENTRY_INVALID flag.
Fixes: 9c584f0495 ('IB/core: Change per-entry lock in RoCE GID table to
one lock')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Port number is not part of ClassPortInfo attribute but is
still needed as a parameter when invoking process_mad.
To properly handle this attribute, port_num is added as a
parameter to get_counter_table and get_perf_mad was changed
not to store port_num in the attribute itself when it's
querying the ClassPortInfo attribute.
This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il>
Fixes: 145d9c5410 ('IB/core: Display extended counter set if available')
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Detected this by building the IB core with W=1. See also patch
"IB core: Fix ib_sg_to_pages()" (commit 8f5ba10ed4).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Leon Romanovsky <leon.romanovsky@mellanox.com>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the local workqueue to process mad completions and use the CQ API
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Stop abusing wr_id and just pass the parameter explicitly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix the following sparse warning:
drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows
an earlier one
drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here
Fixes: d69e3bcf79 ('IB/mlx5: Mmap the HCA's core clock register to user-space')
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In commit dbf727de74 ("IB/core: Use GID table in AH creation and dmac
resolution") we copy source mac to mlx4_ah from the attributes of
gid at ib_ah_attr.grh.sgid_index. Now we can use it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hop limit value wasn't copied from attributes when ah was created.
This may influence packets for unconnected services to get dropped in
routers when endpoints are not in the same subnet.
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Maximum number of EQE capacity per CQ was mistakenly exposed
as CQE. Fix that.
Fixes: 938fe83c8d ("net/mlx5_core: New device capabilities handling")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The h/w is designed in such a way that, if you do anything IPv6
related, a valid clip entry must be there. So take clip reference
before creating IPv6 listening servers, and then if we fail to
create server, release the clip entry.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit c5dfb000b9 ("iw_cxgb4: Pass qid range to user space driver")
from Dec 11, 2015, leads to the following static checker warning:
drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open()
warn: variable dereferenced before check 'rdev->status_page'
Also we weren't deallocating ocqp pool in error path when failed to
allocate status page. Fixing it too.
Fixes: c5dfb000b9 ("iw_cxgb4: Pass qid range to user space driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The issue here is that there is a cut and paste bug. When we allocate
cma_dev_group->default_ports_group we use "sizeof(*cma_dev_group->ports)"
instead of "sizeof(*cma_dev_group->default_ports_group)".
We're bumping up against the 80 character limit so I introduced a new
local pointer "ports_group" to get around that.
Fixes: 045959db65 ('IB/cma: Add configfs for rdma_cm')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
nes_reg_phys_mr() returns ERR_PTRs on error. It doesn't return NULL.
This bug has been there for a while, but we recently changed from
calling a function pointer to calling nes_reg_phys_mr() directly so now
Smatch is able to detect the bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current code is problematic when the QP creation and ipoib is used to
support NFS and NFS desires to do IO for paging purposes. In that case, the
GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory
situations.
This fix adds support to create queue pair with GFP_NOIO flag for connected
mode only to cleanly fail the create queue pair in those situations.
Cc: <stable@vger.kernel.org> # 3.16+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Attributed ID was declared as an int while the value should really be big
endian 16.
Fixes: 35c4cbb178 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issuing "open" on be2net interface.
The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.
A. be2net is sending administrative open/close event to ocrdma holding
device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
So sequence of locks is rtnl_lock---> device_list lock
B. When new ocrdma roce device gets registered, infiniband stack now
takes rtnl_lock in ib_register_device() in GID initialization routines.
So sequence of locks in this path is device_list lock ---> rtnl_lock.
This improper locking sequence causes deadlock.
With this patch we stop using administrative open and close events
injected by be2net driver. These events were used to dispatch PORT_ACTIVE
and PORT_ERROR events to the IB-stack. This patch implements a logic
to receive async-link-events generated from CNA whenever link-state-change
is detected. Now on, these async-events will be used to dispatch
PORT_ACTIVE and PORT_ERROR events to IB-stack.
Depending on async-events from CNA removes the need to hold device-list-mutex
and thus breaks the busy-wait scenario.
Reported-by: Doug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Dispatch only port event to IB stack when port state changes.
Don't explicitly modify qps to error. Let application listen to
port events on async event queue or let QP fail with retry-exceeded
completion error.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
vlan-id is wrongly getting as 0 when PFC is enabled.
Set vlan-id configured by user in QP parameters.
In case vlan interface is not used, flash a warning to
user to configure vlan and assign vlan-id as 0 in qp params.
Fixes: dbf727de74 ('IB/core: Use GID table in AH creation and dmac resolution')
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
cma_validate_port wrongly assumed that Ethernet devices are RoCE
devices and thus their ndev should be matched in the GID table.
This broke the iWarp support. Fixing that matching the ndev only if
we work on a RoCE port.
Cc: <stable@vger.kernel.org> # 4.4.x-
Fixes: abae1b71dd ('IB/cma: cma_validate_port should verify the port
and netdevice')
Reported-by: Hariprasad Shenai <hariprasad@chelsio.com>
Tested-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ipoib_mcast_restart_task calls ipoib_mcast_remove_list with the
parameter mcast->dev. That mcast is a temporary (used as an iterator)
variable that may be uninitialized.
There is no need to send the variable dev to the function, as each mcast
has its dev as a member in the mcast struct.
This causes the next panic:
RIP: 0010: ipoib_mcast_leave+0x6d/0xf0 [ib_ipoib]
RSP: 0018: EFLAGS: 00010246
RAX: f0201 RBX: 24e00 RCX: 00000
....
....
Stack:
Call Trace:
ipoib_mcast_remove_list+0x3a/0x70 [ib_ipoib]
ipoib_mcast_restart_task+0x3bb/0x520 [ib_ipoib]
process_one_work+0x164/0x470
worker_thread+0x11d/0x420
...
Fixes: 5a0e81f6f4 ('IB/IPoIB: factor out common multicast list removal code')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reported-by: Doron Tsur <doront@mellanox.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With several ConnectX-4 cards installed on a server, one may receive
irqn > 255 from the kernel API, which we mistakenly trim to 8bit.
This causes EQ creation failure with the following stack trace:
[<ffffffff812a11f4>] dump_stack+0x48/0x64
[<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0
[<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180
[<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core]
[<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core]
[<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core]
[<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core]
[<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core]
[<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0
Fixing it by changing of the irqn type from u8 to unsigned int to
support values > 255
Fixes: 61d0e73e0a ('net/mlx5_core: Use the the real irqn in eq->irqn')
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Doron Tsur <doront@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull trivial tree updates from Jiri Kosina.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
floppy: make local variable non-static
exynos: fixes an incorrect header guard
dt-bindings: fixes some incorrect header guards
cpufreq-dt: correct dead link in documentation
cpufreq: ARM big LITTLE: correct dead link in documentation
treewide: Fix typos in printk
Documentation: filesystem: Fix typo in fs/eventfd.c
fs/super.c: use && instead of & for warn_on condition
Documentation: fix sysfs-ptp
lib: scatterlist: fix Kconfig description
This patch does a simple conversion of ib_srpt code to use
proper modern core_tpg_get_initiator_node_acl() lookup using
se_node_acl->acl_kref, and drops the legacy internal list
usage from srpt_lookup_acl().
This involves doing transport_init_session() earlier, and
making sure transport_free_session() is called during
a se_node_acl lookup failure to drop the last ->acl_kref.
Also, it adds a minor backwards-compat hack to avoid the
potential for user-space wrt node-acl WWPN formatting by
simply stripping off '0x' prefix from ch->sess_name, and
retrying once if core_tpg_get_initiator_node_acl() fails.
Finally, go ahead and drop port_acl_list port_acl_lock
since they are no longer used.
Cc: Vu Pham <vu@mellanox.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Adding flow steering support by creating a flow-table per
priority (if rules exist in the priority). mlx5_ib uses
autogrouping and thus only creates the required destinations.
Also includes adding of these flow steering utilities
1. Parsing verbs flow attributes hardware steering specs.
2. Check if flow is multicast - this is required in order to decide
to which flow table will we add the steering rule.
3. Set outer headers in flow match criteria to zeros.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Dan, isert_create_device_ib_res() failure within
isert_device_get() can potentially return a postive value,
resulting in ERR_PTR() triggering a NULL pointer dereference.
Caught by the static checker:
drivers/infiniband/ulp/isert/ib_isert.c:423 isert_device_get()
error: passing non negative 1 to ERR_PTR
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Recently Dough Ledford reported a deadlock happening
between ocrdma-load sequence and NetworkManager service
issuing "open" on be2net interface.
The deadlock happens when any be2net hook (e.g. open/close) is called
in parallel to insmod ocrdma.ko.
A. be2net is sending administrative open/close event to ocrdma holding
device_list_mutex. It does this from ndo_open/ndo_stop hooks of be2net.
So sequence of locks is rtnl_lock---> device_list lock
B. When new ocrdma roce device gets registered, infiniband stack now
takes rtnl_lock in ib_register_device() in GID initialization routines.
So sequence of locks in this path is device_list lock ---> rtnl_lock.
This improper locking sequence causes deadlock.
With this patch we stop using administrative open and close events
injected by be2net driver. These events were used to dispatch PORT_ACTIVE
and PORT_ERROR events to the IB-stack. This patch implements a logic
to receive async-link-events generated from CNA whenever link-state-change
is detected. Now on, these async-events will be used to dispatch
PORT_ACTIVE and PORT_ERROR events to IB-stack.
Depending on async-events from CNA removes the need to hold device-list-mutex
and thus breaks the busy-wait scenario.
Reported-by: Doug Ledford <dledford@redhat.com>
CC: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Selvin Xavier <selvin.xavier@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Dispatch only port event to IB stack when port state changes.
Don't explicitly modify qps to error. Let application listen to
port events on async event queue or let QP fail with retry-exceeded
completion error.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
vlan-id is wrongly getting as 0 when PFC is enabled.
Set vlan-id configured by user in QP parameters.
In case vlan interface is not used, flash a warning to
user to configure vlan and assign vlan-id as 0 in qp params.
Fixes: dbf727de74 ('IB/core: Use GID table in AH creation and dmac resolution')
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: Devesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Declare that we support remote invalidation in case we are:
1. using fastreg method
2. always registering memory
Detect the invalidated rkey from the work completion info so we
won't invalidate it locally. The spec mandates that we must not rely
on the target remote invalidate our rkey so we must check it upon
a receive (scsi response) completion.
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When we enable remote invalidate support we won't want to perform
local invalidates at the same time we do today, but we still need
to get new rkeys. So, decouple the rkey update from the local
invalidate and tie it to memory reg instead.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We'll use remote invalidate, according to negotiation result
during connection establishment. If the initiator declared that
it supports the remote invalidate exception and the local HCA
supports IB_DEVICE_MEM_MGT_EXTENSIONS then the target will
use IB_WR_SEND_WITH_INV with the correct rkey for the response.
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iser target does not support zero based virtual addresses and
send with invalidate, so it should declare that it doesn't.
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We don't need iser_proto.h anymore, remove it and
move (non-protocol) declarations to ib_isert.h
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The iser RDMA_CM negotiation protocol is shared by
the initiator and the target, so have a shared header
for the defines and structure. Move relevant items from
the initiator and target headers.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This parameter is described as "is mr valid indicator".
In other words, it indicates whether memory registration
is valid or not. So intuitive values would be:
mr_valid=True, when memory registration is valid and
mr_valid=False otherwise.
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When all the task data is sent as immediate data, we are
allowed to use the local_dma_lkey as it is not sent to
the wire.
Signed-off-by: Jenny Derzhavetz <jennyf@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We have in iser iser_sg_to_page_vec which has exactly
the same role as ib_sg_to_pages. Customize the page_vec
to hold a fake MR so we can reuse ib_sg_to_pages.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Destroy workqueue on transport register error, also
release kmem cache on workqueue allocation error.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This mmu_notifier_ops structure is never modified, so declare it as
const, like the other mmu_notifier_ops structures.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The iser_reg_ops structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The nes_cm_ops structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch will report the tx/rx checksum cap for raw qp via the
query device results.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Failure in kmalloc memory allocations will throw a warning about it.
Such warnings are not needed anymore, since in commit 0ef2f05c7e
("IB/mlx4: Use vmalloc for WR buffers when needed"), fallback mechanism
from kmalloc() to __vmalloc() was added.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to ensure IB spec atomic correctness in atomic operations, if
HW is configured to host endianness, advertise IB_ATOMIC_HCA. if not,
advertise IB_ATOMIC_NONE.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The cxgb3_*_send() functions return NET_XMIT_ values, which are
positive integers values. So don't treat positive return values
as an error.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enhances the t4_dev_status_page to pass the qid start and size
attributes from iw_cxgb4 to libcxgb4.
Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and
revert to the old way of computing the qid ranges.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It was found that when a process was rapidly sending MADs other processes could
be hung in their unregister calls.
This would happen when process A was injecting packets fast enough that the
single threaded workqueue was never exiting ib_mad_completion_handler.
Therefore when process B called flush_workqueue via the unregister call it
would hang until process A stopped sending MADs.
The fix is to periodically reschedule ib_mad_completion_handler after
processing a large number of completions. The number of completions chosen was
decided based on the defaults for the recv queue size. However, it was kept
fixed such that increasing those queue sizes would not adversely affect
fairness in the future.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support of cross-channel functionality to mlx5
driver. This includes ability to ignore overrun for CQ
which intended for cross-channel, export device capability and
configure the QP to be sync master/slave queues.
The cross-channel enabled QP supports combination of
three possible properties:
* WQE processing on the receive queue of this QP
* WQE processing on the send queue of this QP
* WQE are supported on the send queue
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The cross-channel feature allows to execute WQEs that involve
synchronization of I/O operations’ on different QPs.
This capability enables to program complex flows with a single
function call, hereby significantly reducing overhead associated
with I/O processing.
Cross-channel operations support is indicated by HCA capability
information.
The queue pairs can be configured to work as a “sync master queue”
or “sync slave queues”.
The added flags are:
1. Device capability flag IB_DEVICE_CROSS_CHANNEL for the
devices that can perform cross-channel operations.
2. CQ property flag IB_CQ_FLAGS_IGNORE_OVERRUN to disable CQ overrun
check. This check is useless in cross-channel scenario.
3. QP property flags to indicate if queues are slave or master:
* IB_QP_CREATE_MANAGED_SEND indicates that posted send work requests
will not be executed immediately and requires enabling.
* IB_QP_CREATE_MANAGED_RECV indicates that posted receive work
requests will not be executed immediately and requires enabling.
* IB_QP_CREATE_CROSS_CHANNEL declares the QP to work in cross-channel
mode. If IB_QP_CREATE_MANAGED_SEND and IB_QP_CREATE_MANAGED_RECV are
not provided, this QP will be sync master queue, else it will be sync
slave.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to read the HCA's current cycles register, we need
to map it to user-space. Add support to map this register
via mmap command.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass hca_core_clock_offset to user-space is mandatory in order to
let the user-space read the free-running clock register from the
right offset in the memory mapped page.
Passing this value is done by changing the vendor's command
and response of init_ucontext to be in extensible form.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reporting the hca_core_clock (in kHZ) and the timestamp_mask in
query_device extended verb. timestamp_mask is used by users in order
to know what is the valid range of the raw timestamps, while
hca_core_clock reports the clock frequency that is used for
timestamps.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to create a CQ that supports timestamp, mlx5 needs to
support the extended create CQ command with the timestamp flag.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check if the extended counters are available and if so
create the proper extended and additional counters.
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add the attr_id on port_table_attribute since we will have to add
a different port_table_attribute for the extended attribute soon.
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Create a new function to retrieve performance management
data from the existing code in get_pma_counter().
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Just pass and address/size pair instead of an ib_phys_buf array.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fold simplified versions of build_phys_page_list and
iwch_register_phys_mem into iwch_get_dma_wr now that no other callers
are left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the
unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw
into the uverbs module.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We have stopped using phys MRs in the kernel a while ago, so let's
remove all the cruft used to implement them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This functionality has no users and was only supported by the staged out
EHCA driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core]
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Code cleanup to move multicast specific code that checks for
a sendonly join to ipoib_multicast.c. This allows the removal
of the export of __ipoib_mcast_find().
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Code cleanup to remove multicast specific code from ipoib_main.c
The removal of a list of multicast groups occurs in three places.
Create a new function ipoib_mcast_remove_list(). Use this new
function in ipoib_main.c too.
That in turn allows the dropping of two functions that were
exported from ipoib_multicast.c for expiration of mc groups.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Advertise RoCE support for IB/core layer and set the hardware to
work in RoCE mode.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the address handle and QP address path fields according to the
link layer type (IB/Eth).
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
These callbacks write into the mlx5 RoCE address table.
Upon del_gid we write a zero'd GID.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When handling a responder completion, if the link layer is Ethernet,
set the work completion network_hdr_type field according to CQE's
info and the IB_WC_WITH_NETWORK_HDR_TYPE flag.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Using the vport access functions to retrieve the Ethernet
specific information and return this information in
ib_query_device and ib_query_port.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For Eth ports only:
Maintain a net device pointer in mlx5_ib_device and update it
upon NETDEV_REGISTER and NETDEV_UNREGISTER events if the
net-device and IB device have the same PCI parent device.
Implement the get_netdev callback to return this net device.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make the existing mlx5_ib_port_link_layer() signature match
the ib device callback signature (add port_num parameter).
Refactor it to use a sub function so that the link layer could
be queried also before the ibdev is created.
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
kzalloc doesn't return ERR_PTR, so there is no need to test for it.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,e;
@@
* x = kzalloc(...)
... when != x = e
* IS_ERR_OR_NULL(x)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
They were already implemented at a lower layer, but the upper level
routine placed arbitrary restrictions on which transitions were
permitted. Simplify the state machine logic to live wholly in
usnic_ib_qp_grp_modify.
Signed-off-by: Dave Goodell <dgoodell@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Xuyang Wang <xuywang@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
query_protocol() was added in commit 6b90a6d66b ("IB/Verbs:
Implement new callback query_protocol()") and then removed in
commit f9b22e355d ("IB/core: Convert core to use bitfield
for caps").
This left behind an unused prototype.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since RoCEv2 is a protocol over IP header it is required to send IGMP
join and leave requests to the network when joining and leaving
multicast groups.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ib_ud_header_init() is used to format InfiniBand headers
in a buffer up to (but not with) BTH. For RoCE UDP ENCAP it is
required that this function would be able to build also IP and UDP
headers.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Users would like to control the behaviour of rdma_cm.
For example, old applications which don't set the
required RoCE gid type could be executed on RoCE V2
network types. In order to support this configuration,
we implement a configfs for rdma_cm.
In order to use the configfs, one needs to mount it and
mkdir <IB device name> inside rdma_cm directory.
The patch adds support for a single configuration file,
default_roce_mode. The mode can either be "IB/RoCE v1" or
"RoCE v2".
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, cma users can't increase or decrease the cma reference
count. This is necassary when setting cma attributes (like the
default GID type) in order to avoid use-after-free errors.
Adding cma_ref_dev and cma_deref_dev APIs.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to make sure API users don't try to use SGIDs which don't
conform to the routing table, validate the route before searching
the RoCE GID table.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to validate the route, we need an easy way to check if a
net-device belongs to our RDMA device. Move this helper function
to a header file in order to make this check easier.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Providers should tell IB core the wc's network type.
This is used in order to search for the proper GID in the
GID table. When using HCAs that can't provide this info,
IB core tries to deep examine the packet and extract
the GID type by itself.
We choose sgid_index and type from all the matching entries in
RDMA-CM based on hint from the IP stack and we set hop_limit for
the IP packet based on above hint from IP stack.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding RoCE v2 GID type and port type. Vendors
which support this type will get their GID table
populated with RoCE v2 GIDs automatically.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch set adds attributes of net device and gid type to each GID
in the GID table. Users that use verbs directly need to specify
the GID index. Since the same GID could have different types or
associated net devices, users should have the ability to query the
associated GID attributes. Adding these attributes to sysfs.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previosuly, cm and cma modules supported only IB and RoCE v1 GID type.
In order to support multiple GID types, the gid_type is passed to
cm_init_av_by_path and stored in the path record.
The rdma cm client would use a default GID type that will be saved in
rdma_id_private.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support multiple GID types, we need to store the gid_type
with each GID. This is also aligned with the RoCE v2 annex "RoCEv2 PORT
GID table entries shall have a "GID type" attribute that denotes the L3
Address type". The currently supported GID is IB_GID_TYPE_IB which is
also RoCE v1 GID type.
This implies that gid_type should be added to roce_gid_table meta-data.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, we've searched the GID table twice: first when we searched
the table for a GID matching the proposed new one, and second when we
didn't find a match, we searched again for an empty GID slot in the
table. Instead, search the table once noting the first empty slot as
we search for our target GID.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, IB GID cached used a lock per entry. This could result
in spending a lot of CPU cycles for locking and unlocking just
in order to find a GID. Changing this in favor of one lock per
a GID table.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Refactor ib_dispatch_event into a new function in order to avoid
duplicating code in the next patch.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit 0ef2f05c7e uses vmalloc for WR buffers
when needed and uses kvfree to free the buffers. It missed changing kfree
to kvfree in mlx4_ib_destroy_srq().
Reported-by: Matthew Finaly <matt@Mellanox.com>
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, cma_match_net_dev called cma_protocol_roce which
tried to verify that the IB device uses RoCE protocol. However,
if rdma_id wasn't bound to a port, then the check would occur
against the first port of the device without regard to whether
that port was even of the same type as the type of port the
incoming packet was received on.
Fix this by passing the port of the request and only checking
against the same port of the device.
Reported-by: Or Gerlitz <gerlitz.or@gmail.com>
Fixes: b8cab5dab1 ('IB/cma: Accept connection without a valid netdev on RoCE')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The copy of the attributes present on the device is now used by all consumers
except for uverbs in case of serving user-space query, where dev->query_device
is called.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Instead, use the cached copy of the attributes present on the device.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use the cached copy of the attributes present on the device, except for
the case of a query originating from user-space, where we have to invoke
the driver query_device entry, so they can fill in their udata.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This way both the IB core and upper level drivers can access these cached
device attributes rather than querying or caching them on their own.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/net/geneve.c
Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new CQ abstraction to simplify completions in the iSER
initiator.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We'll need it later with the new CQ abstraction. also switch
login bufs to void pointers.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove struct rdma_iu and instead allocate the struct ib_rdma_wr array
early and fill out directly. This allows us to chain the WRs, and thus
archives both less lock contention on the HCA workqueue as well as much
simpler error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
This adds an abstraction that allows ULPs to simply pass a completion
object and completion callback with each submitted WR and let the RDMA
core handle the nitty gritty details of how to handle completion
interrupts and poll the CQ.
In detail there is a new ib_cqe structure which just contains the
completion callback, and which can be used to get at the containing
object using container_of. It is pointed to by the WR and WC as an
alternative to the wr_id field, similar to how many ULPs already use
the field to store a pointer using casts.
A driver using the new completion callbacks allocates it's CQs using
the new ib_create_cq API, which in addition to the number of CQEs and
the completion vectors also takes a mode on how we poll for CQEs.
Three modes are available: direct for drivers that never take CQ
interrupts and just poll for them, softirq to poll from softirq context
using the to be renamed blk-iopoll infrastructure which takes care of
rearming and budgeting, or a workqueue for consumer who want to be
called from user context.
Thanks a lot to Sagi Grimberg who helped reviewing the API, wrote
the current version of the workqueue code because my two previous
attempts sucked too much and converted the iSER initiator to the new
API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The remove_keys() logic is performed as garbage collection task. Such
task is intended to be run when no other active processes are running.
The need_resched() will return TRUE if there are user tasks to be
activated in near future.
In such case, we don't execute remove_keys() and postpone
the garbage collection work to try to run in next cycle,
in order to free CPU resources to other tasks.
The possible pseudo-code to trigger such scenario:
1. Allocate a lot of MR to fill the cache above the limit.
2. Wait a small amount of time "to calm" the system.
3. Start CPU extensive operations on multi-node cluster.
4. Expect performance degradation during MR cache shrink operation.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There are several hits that WR buffer allocation(kmalloc) failed.
It failed at order 3 and/or 4 contigous pages allocation. At the same time
there are actually 100MB+ free memory but well fragmented.
So try vmalloc when kmalloc failed.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver now exposes sufficient limits so we can
avoid having mlx4 specific work-around.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Receipt of CM MAD with other than the Send method for an attribute
other than the ClassPortInfo attribute is invalid.
CM attributes other than ClassPortInfo only use the send method.
The SRP initiator does not maintain a timeout policy for CM connect
requests relies on the CM layer to do that. The result was that
the SRP initiator hung as the connect request never completed.
A new SRP target has been observed to respond to Send CM REQ
with GetResp of CM REQ with bad status. This is non conformant
with IBA spec but exposes a vulnerability in the current MAD/CM
code which will respond to the incoming GetResp of CM REQ as if
it was a valid incoming Send of CM REQ rather than tossing
this on the floor. It also causes the MAD layer not to
retransmit the original REQ even though it has not received a REP.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fix multiple spelling typos found in
various part of kernel.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On 12/03/2015 01:18 AM, Christoph Hellwig wrote:
> The patch looks good to me, but while we touch this area, how about
> throwing in a few cosmetic fixes as well?
How about the patch below ? In that version of the ib_sg_to_pages() fix
these concerns have been addressed and additionally to more bugs have been fixed.
------------
[PATCH] IB core: Fix ib_sg_to_pages()
Fix the code for detecting gaps. A gap occurs not only if the
second or later scatterlist element is not aligned but also if
any scatterlist element other than the last does not end at a
page boundary.
In the code for coalescing contiguous elements, ensure that
mr->length is correct and that last_page_addr is up-to-date.
Ensure that this function returns a negative
error code instead of zero if the first set_page() call fails.
Fixes: commit 4c67e2bfc8 ("IB/core: Introduce new fast registration API")
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
After dma_map_sg() has been called the return value of that function
must be used as the number of elements in the scatterlist instead of
scsi_sg_count().
Fixes: commit f7f7aab1a5 ("IB/srp: Convert to new registration API")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Without this sg_dma_len will return 0 on architectures tha have
the dma_length field.
Fixes: commit f7f7aab1a5 ("IB/srp: Convert to new registration API")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When using work request based memory registration (fast_reg)
we must reserve SQ entries for registration and invalidation
in addition to send operations. Each IO consumes 3 SQ entries
(registration, send, invalidation) so we need to allocate 3x
larger send-queue instead of 2x.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If srp_connect_ch() returns a positive value then that is considered
by its caller as a connection failure but this does not result in a
scsi_host_put() call and additionally causes the srp_create_target()
function to return a positive value while it should return a negative
value. Avoid all this confusion and additionally fix a memory leak by
ensuring that srp_connect_ch() always returns a value that is <= 0.
This patch avoids that a rejected login triggers the following memory
leak:
unreferenced object 0xffff88021b24a220 (size 8):
comm "srp_daemon", pid 56421, jiffies 4295006762 (age 4240.750s)
hex dump (first 8 bytes):
68 6f 73 74 35 38 00 a5 host58..
backtrace:
[<ffffffff8151014a>] kmemleak_alloc+0x7a/0xc0
[<ffffffff81165c1e>] __kmalloc_track_caller+0xfe/0x160
[<ffffffff81260d2b>] kvasprintf+0x5b/0x90
[<ffffffff81260e2d>] kvasprintf_const+0x8d/0xb0
[<ffffffff81254b0c>] kobject_set_name_vargs+0x3c/0xa0
[<ffffffff81337e3c>] dev_set_name+0x3c/0x40
[<ffffffff81355757>] scsi_host_alloc+0x327/0x4b0
[<ffffffffa03edc8e>] srp_create_target+0x4e/0x8a0 [ib_srp]
[<ffffffff8133778b>] dev_attr_store+0x1b/0x20
[<ffffffff811f27fa>] sysfs_kf_write+0x4a/0x60
[<ffffffff811f1e8e>] kernfs_fop_write+0x14e/0x180
[<ffffffff81176eef>] __vfs_write+0x2f/0xf0
[<ffffffff811771e4>] vfs_write+0xa4/0x100
[<ffffffff81177c64>] SyS_write+0x54/0xc0
[<ffffffff8151b257>] entry_SYSCALL_64_fastpath+0x12/0x6f
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
It was found by Saurabh Sengar that the netlink code tried to allocate
memory with GFP_KERNEL while holding a spinlock. While it is possible
to fix the issue by replacing GFP_KERNEL with GFP_ATOMIC, it is better
to get rid of the spinlock while sending the packet. However, in order
to protect against a race condition that a quick response may be received
before the request is put on the request list, we need to put the request
on the list first.
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
do_div is the wrong way to divide a sector_t, as it is less
efficient when sector_t is 32-bit wide. With the upcoming
do_div optimizations, the kernel starts warning about this:
drivers/infiniband/ulp/iser/iser_verbs.c:1296:4: note: in expansion of macro 'do_div'
include/asm-generic/div64.h:224:22: warning: passing argument 1 of '__div64_32' from incompatible pointer type
This changes the code to use sector_div instead, which always
produces optimal code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current implementation gets a spin_lock, and at any scale with
qib and hfi1 post send, the lock contention grows exponentially
with the number of QPs.
idr_find() is RCU compatibile, so read doesn't need the lock.
Change to use rcu_read_lock() and rcu_read_unlock() in
__idr_get_uobj().
kfree_rcu() is used to insure a grace period between the
idr removal and actual free.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Minor errors found via code inspection during future development.
SFF 8636 defines bit position 2 to hold the status indication of
QSFP memory paging. The mask used to test for the value was
incorrect and is fixed in this patch. Additionally, the dump
function had a mismatch between the field being printed out and
the field used to source the data which was fixed.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reported-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Commit e622f2f4ad ("IB: split struct ib_send_wr")
introduced a regression for HCAs whose user mode post
sends go through ib_uverbs_post_send().
The code didn't account for the fact that the first sge is
offset by an operation dependent length. The allocation did,
but the pointer to the destination sge list is computed without
that knowledge. The sge list copy_from_user() then corrupts
fields in the work request
Store the operation dependent length in a local variable and
compute the sge list copy_from_user() destination using that length.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
struct qib_mr requires the mr member be the last because struct
qib_mregion contains a dynamic array at the end. The additions
of members should have been placed before this structure as the
comment noted.
Failure to do so was causing random memory corruption. Reproducing
this bug was easy to do by running the client and server of
ib_write_bw -s 8 -n 5 on the same node.
This BUG() was tripped in a slab debug kernel:
kernel BUG at mm/slab.c:2572!
Fixes: 38071a461f ("IB/qib: Support the new memory registration API")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Under HA mode, it's possible that the VF registered its GID
(and expects to get mads through the PV scheme) on a port which is
different from the one this mad arrived on, due to HA fail over.
Therefore, if the gid is not matched on the port that the packet arrived
on, check for a match on the other port if HA mode is active -- and if a
match is found on the other port, continue processing the mad using that
other port.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Haggai Eran
Erez Shitrit
Meny Yossefi
Leon Romanovsky
Bart Van Assche
Devesh Sharma
Somnath Kotur
Insu Yun
Ben Hutchings
Marina Varshaver
Abhilash Jindal
Faisal Latif
Steve Wise
Steve Wise
Arnd Bergmann
Hariprasad S
David Decotigny
Achiad Shochat
David S. Miller
Linus Torvalds
Huy Nguyen
Eran Ben Elisha
Devesh Sharma
Dave Hansen
Masanari Iida
Alex Estrin
Selvin Xavier
Colin Ian King
Carol L Soto
Moni Shoua
Maor Gottlieb
Majd Dibbiny
Matan Barak
Al Viro
Leon Romanovsky
Haggai Abramovsky
Kaike Wan
Sagi Grimberg
Mike Marciniszyn
Hal Rosenstock
Christoph Hellwig
Christoph Hellwig
Lucas Tanure
Dan Carpenter
Vinit Agnihotri
Ira Weiny
Doron Tsur
Nicholas Bellinger
Jenny Derzhavetz
Roi Dayan
Julia Lawall
Bodong Wang
Dean Luick
Christoph Lameter
Nelson Escobar
Wengang Wang
Doug Ledford
Or Gerlitz
Easwar Hariharan