Declare LZ4_decompress_safe_withPrefix64k as static to fix sparse
warning:
> warning: symbol 'LZ4_decompress_safe_withPrefix64k' was not declared.
> Should it be static?
Link: https://lkml.kernel.org/r/20210511154345.610569-1-thisisrast7@gmail.com
Signed-off-by: Rajat Asthana <thisisrast7@gmail.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Cc: Gao Xiang <hsiangkao@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LZ4 final literal copy could be overlapped when doing
in-place decompression, so it's unsafe to just use memcpy()
on an optimized memcpy approach but memmove() instead.
Upstream LZ4 has updated this years ago [1] (and the impact
is non-sensible [2] plus only a few bytes remain), this commit
just synchronizes LZ4 upstream code to the kernel side as well.
It can be observed as EROFS in-place decompression failure
on specific files when X86_FEATURE_ERMS is unsupported,
memcpy() optimization of commit 59daa706fb ("x86, mem:
Optimize memcpy by avoiding memory false dependece") will
be enabled then.
Currently most modern x86-CPUs support ERMS, these CPUs just
use "rep movsb" approach so no problem at all. However, it can
still be verified with forcely disabling ERMS feature...
arch/x86/lib/memcpy_64.S:
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
- "jmp memcpy_erms", X86_FEATURE_ERMS
+ "jmp memcpy_orig", X86_FEATURE_ERMS
We didn't observe any strange on arm64/arm/x86 platform before
since most memcpy() would behave in an increasing address order
("copy upwards" [3]) and it's the correct order of in-place
decompression but it really needs an update to memmove() for sure
considering it's an undefined behavior according to the standard
and some unique optimization already exists in the kernel.
[1] 33cb8518ac
[2] https://github.com/lz4/lz4/pull/717#issuecomment-497818921
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=12518
Link: https://lkml.kernel.org/r/20201122030749.2698994-1-hsiangkao@redhat.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Li Guifu <bluce.liguifu@huawei.com>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch replaces all memcpy() calls with LZ4_memcpy() which calls
__builtin_memcpy() so the compiler can inline it.
LZ4 relies heavily on memcpy() with a constant size being inlined. In x86
and i386 pre-boot environments memcpy() cannot be inlined because memcpy()
doesn't get defined as __builtin_memcpy().
An equivalent patch has been applied upstream so that the next import
won't lose this change [1].
I've measured the kernel decompression speed using QEMU before and after
this patch for the x86_64 and i386 architectures. The speed-up is about
10x as shown below.
Code Arch Kernel Size Time Speed
v5.8 x86_64 11504832 B 148 ms 79 MB/s
patch x86_64 11503872 B 13 ms 885 MB/s
v5.8 i386 9621216 B 91 ms 106 MB/s
patch i386 9620224 B 10 ms 962 MB/s
I also measured the time to decompress the initramfs on x86_64, i386, and
arm. All three show the same decompression speed before and after, as
expected.
[1] https://github.com/lz4/lz4/pull/890
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Link: http://lkml.kernel.org/r/20200803194022.2966806-1-nickrterrell@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This operation was intentional, but tools such as smatch will warn that it
might not have been.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yann Collet <cyan@fb.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Gao Xiang <hsiangkao@aol.com>
Link: http://lkml.kernel.org/r/3bf931c6ea0cae3e23f3485801986859851b4f04.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the LZ4 compression module based on LZ4 v1.8.3 in order for the
erofs file system to use the newest LZ4_decompress_safe_partial() which
can now decode exactly the nb of bytes requested [1] to take place of the
open hacked code in the erofs file system itself.
Currently, apart from the erofs file system, no other users use
LZ4_decompress_safe_partial, so no worry about the interface.
In addition, LZ4 v1.8.x boosts up decompression speed compared to the
current code which is based on LZ4 v1.7.3, mainly due to shortcut
optimization for the specific common LZ4-sequences [2].
lzbench testdata (tested in kirin710, 8 cores, 4 big cores
at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]):
Compressor name Compress. Decompress. Compr. size Ratio Filename
memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8
lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8
lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8
lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8
[1] https://github.com/lz4/lz4/issues/56608d347b5b2
[2] v1.8.1 perf: slightly faster compression and decompression speed
a31b7058cb
v1.8.2 perf: slightly faster HC compression and decompression speed
45f8603aae1a191b3f8d
[3] http://mattmahoney.net/dc/textdata.htmlhttp://mattmahoney.net/dc/enwik8.zip
Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Tested-by: Guo Xuenan <guoxuenan@huawei.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Fang Wei <fangwei1@huawei.com>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: <weidu.du@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't populate the read-only arrays dec32table and dec64table on the
stack, instead make them both static const. Makes the object code
smaller by over 10K bytes:
Before:
text data bss dec hex filename
31500 0 0 31500 7b0c lib/lz4/lz4_decompress.o
After:
text data bss dec hex filename
20237 176 0 20413 4fbd lib/lz4/lz4_decompress.o
(gcc version 7.2.0 x86_64)
Link: http://lkml.kernel.org/r/20170921221939.20820-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the functions introduced as wrappers for providing backwards
compatibility to the prior LZ4 version. They're not needed anymore
since there's no callers left.
Link: http://lkml.kernel.org/r/1486321748-19085-6-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Update LZ4 compressor module", v7.
This patchset updates the LZ4 compression module to a version based on
LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast
which provides an "acceleration" parameter as a tradeoff between high
compression ratio and high compression speed.
We want to use LZ4 fast in order to support compression in lustre and
(mostly, based on that) investigate data reduction techniques in behalf
of storage systems.
Also, it will be useful for other users of LZ4 compression, as with LZ4
fast it is possible to enable applications to use fast and/or high
compression depending on the usecase. For instance, ZRAM is offering a
LZ4 backend and could benefit from an updated LZ4 in the kernel.
LZ4 homepage: http://www.lz4.org/
LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3
Benchmark (taken from [1], Core i5-4300U @1.9GHz):
----------------|--------------|----------------|----------
Compressor | Compression | Decompression | Ratio
----------------|--------------|----------------|----------
memcpy | 4200 MB/s | 4200 MB/s | 1.000
LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375
LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607
LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886
LZ4 default | 385 MB/s | 1850 MB/s | 2.101
[1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html
[PATCH 1/5] lib: Update LZ4 compressor module
[PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version
[PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version
[PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version
[PATCH 5/5] lib/lz4: Remove back-compat wrappers
This patch (of 5):
Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel
module is inspired by the previous work by Chanho Min. The updated LZ4
module will not break existing code since the patchset contains
appropriate changes.
API changes:
New method LZ4_compress_fast which differs from the variant available in
kernel by the new acceleration parameter, allowing to trade compression
ratio for more compression speed and vice versa.
LZ4_decompress_fast is the respective decompression method, featuring a
very fast decoder (multiple GB/s per core), able to reach RAM speed in
multi-core systems. The decompressor allows to decompress data
compressed with LZ4 fast as well as the LZ4 HC (high compression)
algorithm.
Also the useful functions LZ4_decompress_safe_partial and
LZ4_compress_destsize were added. The latter reverses the logic by
trying to compress as much data as possible from source to dest while
the former aims to decompress partial blocks of data.
A bunch of streaming functions were also added which allow
compressig/decompressing data in multiple steps (so called "streaming
mode").
The methods lz4_compress and lz4_decompress_unknownoutputsize are now
known as LZ4_compress_default respectivley LZ4_decompress_safe. The old
methods will be removed since there's no callers left in the code.
[arnd@arndb.de: fix KERNEL_LZ4 support]
Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de
[akpm@linux-foundation.org: simplify]
[akpm@linux-foundation.org: fix the simplification]
[4sschmid@informatik.uni-hamburg.de: fix performance regressions]
Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de
[4sschmid@informatik.uni-hamburg.de: v8]
Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de
Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Bongkyu Kim <bongkyu.kim@lge.com>
Cc: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These identifiers are bogus. The interested architectures should define
HAVE_EFFICIENT_UNALIGNED_ACCESS whenever relevant to do so. If this
isn't true for some arch, it should be fixed in the arch definition.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on Sergey's test patch [1], this fixes zram with lz4 compression
on big endian cpus.
Note that the 64-bit preprocessor test is not a cleanup, it's part of
the fix, since those identifiers are bogus (for example, __ppc64__
isn't defined anywhere else in the kernel, which means we'd fall into
the 32-bit definitions on ppc64).
Tested on ppc64 with no regression on x86_64.
[1] http://marc.info/?l=linux-kernel&m=145994470805853&w=4
Cc: stable@vger.kernel.org
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, on x86_64, decompression fails with the following
error:
Decompressing Linux...
Decoding failed
-- System halted
This condition is not needed for a 64bit kernel(from commit d5e7caf):
if( ... ||
(op + COPYLENGTH) > oend)
goto _output_error
macro LZ4_SECURE_COPY() tests op and does not copy any data
when op exceeds the value.
added by analogy to lz4_uncompress_unknownoutputsize(...)
Signed-off-by: Krzysztof Kolasa <kkolasa@winsoft.pl>
Tested-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no reason to allocate the dec{32,64}table on the stack; it
just wastes a bunch of instructions setting them up and, of course,
also consumes quite a bit of stack. Using size_t for such small
integers is a little excessive.
$ scripts/bloat-o-meter /tmp/built-in.o lib/built-in.o
add/remove: 2/2 grow/shrink: 2/0 up/down: 1304/-1548 (-244)
function old new delta
lz4_decompress_unknownoutputsize 55 718 +663
lz4_decompress 55 632 +577
dec64table - 32 +32
dec32table - 32 +32
lz4_uncompress 747 - -747
lz4_uncompress_unknownoutputsize 801 - -801
The now inlined lz4_uncompress functions used to have a stack
footprint of 176 bytes (according to -fstack-usage); their inlinees
have increased their stack use from 32 bytes to 48 and 80 bytes,
respectively.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the part of the compression data are corrupted, or the compression
data is totally fake, the memory access over the limit is possible.
This is the log from my system usning lz4 decompression.
[6502]data abort, halting
[6503]r0 0x00000000 r1 0x00000000 r2 0xdcea0ffc r3 0xdcea0ffc
[6509]r4 0xb9ab0bfd r5 0xdcea0ffc r6 0xdcea0ff8 r7 0xdce80000
[6515]r8 0x00000000 r9 0x00000000 r10 0x00000000 r11 0xb9a98000
[6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc 0x820149bc
[6528]spsr 0x400001f3
and the memory addresses of some variables at the moment are
ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000
As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory
over @oend.
Signed-off-by: JeHyeon Yeon <tom.yeon@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan points out that I forgot to make the needed fixes to the
lz4_uncompress_unknownoutputsize() function to mirror the changes done
in lz4_decompress() with regards to potential pointer overflows.
The only in-kernel user of this function is the zram code, which only
takes data from a valid compressed buffer that it made itself, so it's
not a big issue. But due to external kernel modules using this
function, it's better to be safe here.
Reported-by: Jan Beulich <JBeulich@suse.com>
Cc: "Don A. Bailey" <donb@securitymouse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is one other possible overrun in the lz4 code as implemented by
Linux at this point in time (which differs from the upstream lz4
codebase, but will get synced at in a future kernel release.) As
pointed out by Don, we also need to check the overflow in the data
itself.
While we are at it, replace the odd error return value with just a
"simple" -1 value as the return value is never used for anything other
than a basic "did this work or not" check.
Reported-by: "Don A. Bailey" <donb@securitymouse.com>
Reported-by: Willy Tarreau <w@1wt.eu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given some pathologically compressed data, lz4 could possibly decide to
wrap a few internal variables, causing unknown things to happen. Catch
this before the wrapping happens and abort the decompression.
Reported-by: "Don A. Bailey" <donb@securitymouse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LZ4 compression and decompression functions require different in
signedness input/output parameters: unsigned char for compression and
signed char for decompression.
Change decompression API to require "(const) unsigned char *".
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LZ4 code is listed as using the "BSD 2-Clause License".
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Acked-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ The 2-clause BSD can be just converted into GPL, but that's rude and
pointless, so don't do it - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset is for supporting LZ4 compression and the crypto API using
it.
As shown below, the size of data is a little bit bigger but compressing
speed is faster under the enabled unaligned memory access. We can use
lz4 de/compression through crypto API as well. Also, It will be useful
for another potential user of lz4 compression.
lz4 Compression Benchmark:
Compiler: ARM gcc 4.6.4
ARMv7, 1 GHz based board
Kernel: linux 3.4
Uncompressed data Size: 101 MB
Compressed Size compression Speed
LZO 72.1MB 32.1MB/s, 33.0MB/s(UA)
LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA)
LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA)
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch:
Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs
for kernel are based on LZ4 implementation by Yann Collet and were changed
for kernel coding style.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
svn revision : r90
Two APIs are added:
lz4_compress() support basic lz4 compression whereas lz4hc_compress()
support high compression or CPU performance get lower but compression
ratio get higher. Also, we require the pre-allocated working memory with
the defined size and destination buffer must be allocated with the size of
lz4_compressbound.
[akpm@linux-foundation.org: make lz4_compresshcctx() static]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for extracting LZ4-compressed kernel images, as well as
LZ4-compressed ramdisk images in the kernel boot process.
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression
APIs for kernel are based on LZ4 implementation by Yann Collet.
Benchmark Results(PATCH v3)
Compiler: Linaro ARM gcc 4.6.2
1. ARMv7, 1.5GHz based board
Kernel: linux 3.4
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.7MB 20.1MB/s, 25.2MB/s(UA)
LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA)
2. ARMv7, 1.7GHz based board
Kernel: linux 3.7
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.0MB 34.1MB/s, 52.2MB/s(UA)
LZ4 6.5MB 86.7MB/s
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a
very fast lossless compression algorithm and it also features an extremely
fast decoder [1].
But we have five of decompressors already and one question which does
arise, however, is that of where do we stop adding new ones? This issue
had been discussed and came to the conclusion [2].
Russell King said that we should have:
- one decompressor which is the fastest
- one decompressor for the highest compression ratio
- one popular decompressor (eg conventional gzip)
If we have a replacement one for one of these, then it should do exactly
that: replace it.
The benchmark shows that an 8% increase in image size vs a 66% increase
in decompression speed compared to LZO(which has been known as the
fastest decompressor in the Kernel). Therefore the "fast but may not be
small" compression title has clearly been taken by LZ4 [3].
[1] http://code.google.com/p/lz4/
[2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157
[3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347
LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository: http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Yann Collet <yann.collet.73@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rajat Asthana
Gao Xiang
Nick Terrell
Joe Perches
Linus Torvalds
Thomas Gleixner
Gao Xiang
Colin Ian King
Sven Schmidt
Rui Salvaterra
Krzysztof Kolasa
Rasmus Villemoes
JeHyeon Yeon
Greg Kroah-Hartman
Sergey Senozhatsky
Richard Laager
Chanho Min
Kyungsik Lee