Граф коммитов

38 Коммитов

Автор SHA1 Сообщение Дата
Jiri Pirko 492b200efd team: add support for sending multicast rejoins
Similar to what is implemented in bonding. User is able to ask team
driver to send IGMP rejoins in case port is enabled or disabled. Using
previously introduced netdev notifier.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 16:52:47 -07:00
Jiri Pirko fc423ff00d team: add peer notification
When port is enabled or disabled, allow to notify peers by unsolicitated
NAs or gratuitous ARPs. Disabled by default.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 16:52:47 -07:00
David S. Miller d98cae64e4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19 16:49:39 -07:00
Jiri Pirko 735d381fa5 team: remove synchronize_rcu() called during port disable
Check the unlikely case of team->en_port_count == 0 before modulo
operation.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 03:06:16 -07:00
Jiri Pirko d80b35beac team: use kfree_rcu instead of synchronize_rcu in team_port_dev
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 03:05:54 -07:00
Jiri Pirko b79462a8b9 team: fix checks in team_get_first_port_txable_rcu()
should be checked if "cur" is txable, not "port".

Introduced by commit 6e88e1357c "team: use function team_port_txable()
for determing enabled and up port"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12 00:56:27 -07:00
Jiri Pirko 753f993911 team: introduce random mode
As suggested by Eric Dumazet, allow user to select mode which chooses
TX port randomly. Functionality should be more of less similar to
round-robin mode with even lower overhead.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06 14:55:20 -05:00
Jiri Pirko acbba0d0f8 team: introduce two default team_modeop functions and use them in modes
No need to duplicate code for this.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06 14:55:20 -05:00
Sasha Levin b67bfe0d42 hlist: drop the node parameter from iterators
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:24 -08:00
Flavio Leitner e185483e6b team: allow userspace to take control over carrier
Some modes don't require any special carrier handling so
in these cases, the kernel can control the carrier as for
any other interface.  However, some other modes, e.g. lacp,
requires more than just that, so userspace needs to control
the carrier itself.

The daemon today is ready to control it, but the kernel
still can change it based on events.

This fix so that either kernel or userspace is controlling
the carrier.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 15:48:09 -05:00
David Howells 607ca46e97 UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-10-13 10:46:48 +01:00
David S. Miller 1304a7343b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2012-08-22 14:21:38 -07:00
Jiri Pirko 1d76efe157 team: add support for non-ethernet devices
This is resolved by two things:
1) allow dev_addr of different length than ETH_ALEN
2) during port add, check for dev->type and change it if necessary

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 02:40:48 -07:00
Amerigo Wang e15c3c2294 netpoll: check netpoll tx status on the right device
Although this doesn't matter actually, because netpoll_tx_running()
doesn't use the parameter, the code will be more readable.

For team_dev_queue_xmit() we have to move it down to avoid
compile errors.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 14:33:32 -07:00
Jiri Pirko 8ff5105a2b team: add support for queue override by setting queue_id for port
Similar to what bonding has. This allows to set queue_id for port so
this port will be used when skb with matching skb->queue_mapping is
going to be transmitted.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03 20:40:12 -07:00
Jiri Pirko a86fc6b7d6 team: add per port priority option
Allow userspace to set port priority.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03 20:40:12 -07:00
Jiri Pirko 69821638b2 team: add signed 32-bit team option type
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-03 20:40:11 -07:00
Jiri Pirko 6c85f2bdda team: add multiqueue support
Largely copied from bonding code.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-20 11:07:00 -07:00
Jiri Pirko bd2d0837ab team: add netpoll support
It's done in very similar way this is done in bonding and bridge.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 09:02:36 -07:00
Jiri Pirko 68c450426a team: make team_port_enabled() and team_port_txable() static inline
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 08:08:20 -07:00
Jiri Pirko 6e88e1357c team: use function team_port_txable() for determing enabled and up port
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-12 08:08:20 -07:00
Jiri Pirko 4a9fbcc6d6 team: remove unused rcu_head field from team_port struct
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 21:09:39 -07:00
Jiri Pirko 52a4fd7780 team: do not allow to map disabled ports
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 21:09:39 -07:00
Jiri Pirko 4bccfd17e1 team: add port_[enabled/disabled] mode callbacks
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:24 -07:00
Jiri Pirko 0f1aad2b7f team: allow async option changes
This patch adds two exported functions. One allows to mark option
instance as changed and the second processes change check and does
transfer of changed options to userspace.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:23 -07:00
Jiri Pirko 85d59a8724 team: push array_index and port into separate structure
Introduce struct team_option_inst_info and push option instance info
there. It can be then easily passed to gsetter context and used for
feature async option changes.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:23 -07:00
Jiri Pirko b13033262d team: introduce array options
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:23 -07:00
Jiri Pirko 5149ee5838 team: add mode priv to port
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:22 -07:00
Jiri Pirko 0402788a6c team: make team_mode struct const
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 15:00:22 -07:00
Jiri Pirko 19a0b58e50 team: allow to enable/disable ports
This patch changes content of hashlist (used to get port struct by
computed index (0...en_port_count-1)). Now the hash list contains only
enabled ports so userspace will be able to say what ports can be used
for tx/rx. This becomes handy when userspace will need to disable ports
which does not belong to active aggregator. By default, newly added port
is enabled.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21 16:26:33 -04:00
Jiri Pirko 71472ec12c team: add user_linkup and user_linkup_enabled per-port option
Allows userspace to setup linkup for ports. Default is to take linkup
directly from ethtool state.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11 10:03:52 -04:00
Jiri Pirko 14f066bab1 team: add bool option type
Add another (hopefully last) option type. Use NLA_FLAG to implement
that.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11 10:03:51 -04:00
Jiri Pirko 80f7c6683f team: add support for per-port options
This patch allows to create per-port options. That becomes handy for all
sorts of stuff, for example for userspace driven link-state, 802.3ad
implementation and so on.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11 10:03:51 -04:00
Jiri Pirko 2615598fc1 team: add binary option type
For transfering generic binary data (e.g. BPF code), introduce new
binary option type.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04 20:30:40 -04:00
Jiri Pirko b82b9183d4 team: send only changed options/ports via netlink
This patch changes event message behaviour to send only updated records
instead of whole list. This fixes bug on which userspace receives non-actual
data in case multiple events occur in row.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-24 15:51:00 -05:00
Jiri Pirko 358b838291 team: replicate options on register
Since multiple team instances are putting defined options into their
option list, during register each option must be cloned before added
into list. This resolves uncool memory corruptions when using multiple
teams.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 18:16:38 -05:00
Jiri Pirko 61dc3461b9 team: convert overall spinlock to mutex
No need to have spinlock for this purpose. So convert this to mutex and
avoid current schedule while atomic problems in netlink code.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 18:16:37 -05:00
Jiri Pirko 3d249d4ca7 net: introduce ethernet teaming device
This patch introduces new network device called team. It supposes to be
very fast, simple, userspace-driven alternative to existing bonding
driver.

Userspace library called libteam with couple of demo apps is available
here:
https://github.com/jpirko/libteam
Note it's still in its dipers atm.

team<->libteam use generic netlink for communication. That and rtnl
suppose to be the only way to configure team device, no sysfs etc.

Python binding of libteam was recently introduced.
Daemon providing arpmon/miimon active-backup functionality will be
introduced shortly. All what's necessary is already implemented in
kernel team driver.

v7->v8:
	- check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling
	  them.
	- use dev_kfree_skb_any() instead of dev_kfree_skb()

v6->v7:
	- transmit and receive functions are not checked in hot paths.
	  That also resolves memory leak on transmit when no port is
	  present

v5->v6:
	- changed couple of _rcu calls to non _rcu ones in non-readers

v4->v5:
	- team_change_mtu() uses team->lock while travesing though port
	  list
	- mac address changes are moved completely to jurisdiction of
	  userspace daemon. This way the daemon can do FOM1, FOM2 and
	  possibly other weird things with mac addresses.
	  Only round-robin mode sets up all ports to bond's address then
	  enslaved.
	- Extended Kconfig text

v3->v4:
	- remove redundant synchronize_rcu from __team_change_mode()
	- revert "set and clear of mode_ops happens per pointer, not per
	  byte"
	- extend comment of function __team_change_mode()

v2->v3:
	- team_change_mtu() uses rcu version of list traversal to unwind
	- set and clear of mode_ops happens per pointer, not per byte
	- port hashlist changed to be embedded into team structure
	- error branch in team_port_enter() does cleanup now
	- fixed rtln->rtnl

v1->v2:
	- modes are made as modules. Makes team more modular and
	  extendable.
	- several commenters' nitpicks found on v1 were fixed
	- several other bugs were fixed.
	- note I ignored Eric's comment about roundrobin port selector
	  as Eric's way may be easily implemented as another mode (mode
	  "random") in future.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13 16:10:10 -05:00