Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
David Howells a6f76f23d2 CRED: Make execve() take advantage of copy-on-write credentials
Make execve() take advantage of copy-on-write credentials, allowing it to set
up the credentials in advance, and then commit the whole lot after the point
of no return.

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     The credential bits from struct linux_binprm are, for the most part,
     replaced with a single credentials pointer (bprm->cred).  This means that
     all the creds can be calculated in advance and then applied at the point
     of no return with no possibility of failure.

     I would like to replace bprm->cap_effective with:

	cap_isclear(bprm->cap_effective)

     but this seems impossible due to special behaviour for processes of pid 1
     (they always retain their parent's capability masks where normally they'd
     be changed - see cap_bprm_set_creds()).

     The following sequence of events now happens:

     (a) At the start of do_execve, the current task's cred_exec_mutex is
     	 locked to prevent PTRACE_ATTACH from obsoleting the calculation of
     	 creds that we make.

     (a) prepare_exec_creds() is then called to make a copy of the current
     	 task's credentials and prepare it.  This copy is then assigned to
     	 bprm->cred.

  	 This renders security_bprm_alloc() and security_bprm_free()
     	 unnecessary, and so they've been removed.

     (b) The determination of unsafe execution is now performed immediately
     	 after (a) rather than later on in the code.  The result is stored in
     	 bprm->unsafe for future reference.

     (c) prepare_binprm() is called, possibly multiple times.

     	 (i) This applies the result of set[ug]id binaries to the new creds
     	     attached to bprm->cred.  Personality bit clearance is recorded,
     	     but now deferred on the basis that the exec procedure may yet
     	     fail.

         (ii) This then calls the new security_bprm_set_creds().  This should
	     calculate the new LSM and capability credentials into *bprm->cred.

	     This folds together security_bprm_set() and parts of
	     security_bprm_apply_creds() (these two have been removed).
	     Anything that might fail must be done at this point.

         (iii) bprm->cred_prepared is set to 1.

	     bprm->cred_prepared is 0 on the first pass of the security
	     calculations, and 1 on all subsequent passes.  This allows SELinux
	     in (ii) to base its calculations only on the initial script and
	     not on the interpreter.

     (d) flush_old_exec() is called to commit the task to execution.  This
     	 performs the following steps with regard to credentials:

	 (i) Clear pdeath_signal and set dumpable on certain circumstances that
	     may not be covered by commit_creds().

         (ii) Clear any bits in current->personality that were deferred from
             (c.i).

     (e) install_exec_creds() [compute_creds() as was] is called to install the
     	 new credentials.  This performs the following steps with regard to
     	 credentials:

         (i) Calls security_bprm_committing_creds() to apply any security
             requirements, such as flushing unauthorised files in SELinux, that
             must be done before the credentials are changed.

	     This is made up of bits of security_bprm_apply_creds() and
	     security_bprm_post_apply_creds(), both of which have been removed.
	     This function is not allowed to fail; anything that might fail
	     must have been done in (c.ii).

         (ii) Calls commit_creds() to apply the new credentials in a single
             assignment (more or less).  Possibly pdeath_signal and dumpable
             should be part of struct creds.

	 (iii) Unlocks the task's cred_replace_mutex, thus allowing
	     PTRACE_ATTACH to take place.

         (iv) Clears The bprm->cred pointer as the credentials it was holding
             are now immutable.

         (v) Calls security_bprm_committed_creds() to apply any security
             alterations that must be done after the creds have been changed.
             SELinux uses this to flush signals and signal handlers.

     (f) If an error occurs before (d.i), bprm_free() will call abort_creds()
     	 to destroy the proposed new credentials and will then unlock
     	 cred_replace_mutex.  No changes to the credentials will have been
     	 made.

 (2) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_bprm_alloc(), ->bprm_alloc_security()
     (*) security_bprm_free(), ->bprm_free_security()

     	 Removed in favour of preparing new credentials and modifying those.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()
     (*) security_bprm_post_apply_creds(), ->bprm_post_apply_creds()

     	 Removed; split between security_bprm_set_creds(),
     	 security_bprm_committing_creds() and security_bprm_committed_creds().

     (*) security_bprm_set(), ->bprm_set_security()

     	 Removed; folded into security_bprm_set_creds().

     (*) security_bprm_set_creds(), ->bprm_set_creds()

     	 New.  The new credentials in bprm->creds should be checked and set up
     	 as appropriate.  bprm->cred_prepared is 0 on the first call, 1 on the
     	 second and subsequent calls.

     (*) security_bprm_committing_creds(), ->bprm_committing_creds()
     (*) security_bprm_committed_creds(), ->bprm_committed_creds()

     	 New.  Apply the security effects of the new credentials.  This
     	 includes closing unauthorised files in SELinux.  This function may not
     	 fail.  When the former is called, the creds haven't yet been applied
     	 to the process; when the latter is called, they have.

 	 The former may access bprm->cred, the latter may not.

 (3) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) The bprm_security_struct struct has been removed in favour of using
     	 the credentials-under-construction approach.

     (c) flush_unauthorized_files() now takes a cred pointer and passes it on
     	 to inode_has_perm(), file_has_perm() and dentry_open().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:24 +11:00
David Howells d84f4f992c CRED: Inaugurate COW credentials
Inaugurate copy-on-write credentials management.  This uses RCU to manage the
credentials pointer in the task_struct with respect to accesses by other tasks.
A process may only modify its own credentials, and so does not need locking to
access or modify its own credentials.

A mutex (cred_replace_mutex) is added to the task_struct to control the effect
of PTRACE_ATTACHED on credential calculations, particularly with respect to
execve().

With this patch, the contents of an active credentials struct may not be
changed directly; rather a new set of credentials must be prepared, modified
and committed using something like the following sequence of events:

	struct cred *new = prepare_creds();
	int ret = blah(new);
	if (ret < 0) {
		abort_creds(new);
		return ret;
	}
	return commit_creds(new);

There are some exceptions to this rule: the keyrings pointed to by the active
credentials may be instantiated - keyrings violate the COW rule as managing
COW keyrings is tricky, given that it is possible for a task to directly alter
the keys in a keyring in use by another task.

To help enforce this, various pointers to sets of credentials, such as those in
the task_struct, are declared const.  The purpose of this is compile-time
discouragement of altering credentials through those pointers.  Once a set of
credentials has been made public through one of these pointers, it may not be
modified, except under special circumstances:

  (1) Its reference count may incremented and decremented.

  (2) The keyrings to which it points may be modified, but not replaced.

The only safe way to modify anything else is to create a replacement and commit
using the functions described in Documentation/credentials.txt (which will be
added by a later patch).

This patch and the preceding patches have been tested with the LTP SELinux
testsuite.

This patch makes several logical sets of alteration:

 (1) execve().

     This now prepares and commits credentials in various places in the
     security code rather than altering the current creds directly.

 (2) Temporary credential overrides.

     do_coredump() and sys_faccessat() now prepare their own credentials and
     temporarily override the ones currently on the acting thread, whilst
     preventing interference from other threads by holding cred_replace_mutex
     on the thread being dumped.

     This will be replaced in a future patch by something that hands down the
     credentials directly to the functions being called, rather than altering
     the task's objective credentials.

 (3) LSM interface.

     A number of functions have been changed, added or removed:

     (*) security_capset_check(), ->capset_check()
     (*) security_capset_set(), ->capset_set()

     	 Removed in favour of security_capset().

     (*) security_capset(), ->capset()

     	 New.  This is passed a pointer to the new creds, a pointer to the old
     	 creds and the proposed capability sets.  It should fill in the new
     	 creds or return an error.  All pointers, barring the pointer to the
     	 new creds, are now const.

     (*) security_bprm_apply_creds(), ->bprm_apply_creds()

     	 Changed; now returns a value, which will cause the process to be
     	 killed if it's an error.

     (*) security_task_alloc(), ->task_alloc_security()

     	 Removed in favour of security_prepare_creds().

     (*) security_cred_free(), ->cred_free()

     	 New.  Free security data attached to cred->security.

     (*) security_prepare_creds(), ->cred_prepare()

     	 New. Duplicate any security data attached to cred->security.

     (*) security_commit_creds(), ->cred_commit()

     	 New. Apply any security effects for the upcoming installation of new
     	 security by commit_creds().

     (*) security_task_post_setuid(), ->task_post_setuid()

     	 Removed in favour of security_task_fix_setuid().

     (*) security_task_fix_setuid(), ->task_fix_setuid()

     	 Fix up the proposed new credentials for setuid().  This is used by
     	 cap_set_fix_setuid() to implicitly adjust capabilities in line with
     	 setuid() changes.  Changes are made to the new credentials, rather
     	 than the task itself as in security_task_post_setuid().

     (*) security_task_reparent_to_init(), ->task_reparent_to_init()

     	 Removed.  Instead the task being reparented to init is referred
     	 directly to init's credentials.

	 NOTE!  This results in the loss of some state: SELinux's osid no
	 longer records the sid of the thread that forked it.

     (*) security_key_alloc(), ->key_alloc()
     (*) security_key_permission(), ->key_permission()

     	 Changed.  These now take cred pointers rather than task pointers to
     	 refer to the security context.

 (4) sys_capset().

     This has been simplified and uses less locking.  The LSM functions it
     calls have been merged.

 (5) reparent_to_kthreadd().

     This gives the current thread the same credentials as init by simply using
     commit_thread() to point that way.

 (6) __sigqueue_alloc() and switch_uid()

     __sigqueue_alloc() can't stop the target task from changing its creds
     beneath it, so this function gets a reference to the currently applicable
     user_struct which it then passes into the sigqueue struct it returns if
     successful.

     switch_uid() is now called from commit_creds(), and possibly should be
     folded into that.  commit_creds() should take care of protecting
     __sigqueue_alloc().

 (7) [sg]et[ug]id() and co and [sg]et_current_groups.

     The set functions now all use prepare_creds(), commit_creds() and
     abort_creds() to build and check a new set of credentials before applying
     it.

     security_task_set[ug]id() is called inside the prepared section.  This
     guarantees that nothing else will affect the creds until we've finished.

     The calling of set_dumpable() has been moved into commit_creds().

     Much of the functionality of set_user() has been moved into
     commit_creds().

     The get functions all simply access the data directly.

 (8) security_task_prctl() and cap_task_prctl().

     security_task_prctl() has been modified to return -ENOSYS if it doesn't
     want to handle a function, or otherwise return the return value directly
     rather than through an argument.

     Additionally, cap_task_prctl() now prepares a new set of credentials, even
     if it doesn't end up using it.

 (9) Keyrings.

     A number of changes have been made to the keyrings code:

     (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have
     	 all been dropped and built in to the credentials functions directly.
     	 They may want separating out again later.

     (b) key_alloc() and search_process_keyrings() now take a cred pointer
     	 rather than a task pointer to specify the security context.

     (c) copy_creds() gives a new thread within the same thread group a new
     	 thread keyring if its parent had one, otherwise it discards the thread
     	 keyring.

     (d) The authorisation key now points directly to the credentials to extend
     	 the search into rather pointing to the task that carries them.

     (e) Installing thread, process or session keyrings causes a new set of
     	 credentials to be created, even though it's not strictly necessary for
     	 process or session keyrings (they're shared).

(10) Usermode helper.

     The usermode helper code now carries a cred struct pointer in its
     subprocess_info struct instead of a new session keyring pointer.  This set
     of credentials is derived from init_cred and installed on the new process
     after it has been cloned.

     call_usermodehelper_setup() allocates the new credentials and
     call_usermodehelper_freeinfo() discards them if they haven't been used.  A
     special cred function (prepare_usermodeinfo_creds()) is provided
     specifically for call_usermodehelper_setup() to call.

     call_usermodehelper_setkeys() adjusts the credentials to sport the
     supplied keyring as the new session keyring.

(11) SELinux.

     SELinux has a number of changes, in addition to those to support the LSM
     interface changes mentioned above:

     (a) selinux_setprocattr() no longer does its check for whether the
     	 current ptracer can access processes with the new SID inside the lock
     	 that covers getting the ptracer's SID.  Whilst this lock ensures that
     	 the check is done with the ptracer pinned, the result is only valid
     	 until the lock is released, so there's no point doing it inside the
     	 lock.

(12) is_single_threaded().

     This function has been extracted from selinux_setprocattr() and put into
     a file of its own in the lib/ directory as join_session_keyring() now
     wants to use it too.

     The code in SELinux just checked to see whether a task shared mm_structs
     with other tasks (CLONE_VM), but that isn't good enough.  We really want
     to know if they're part of the same thread group (CLONE_THREAD).

(13) nfsd.

     The NFS server daemon now has to use the COW credentials to set the
     credentials it is going to use.  It really needs to pass the credentials
     down to the functions it calls, but it can't do that until other patches
     in this series have been applied.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:23 +11:00
David Howells bb952bb98a CRED: Separate per-task-group keyrings from signal_struct
Separate per-task-group keyrings from signal_struct and dangle their anchor
from the cred struct rather than the signal_struct.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:20 +11:00
David Howells c69e8d9c01 CRED: Use RCU to access another task's creds and to release a task's own creds
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:19 +11:00
David Howells 86a264abe5 CRED: Wrap current->cred and a few other accessors
Wrap current->cred and a few other accessors to hide their actual
implementation.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:18 +11:00
David Howells b6dff3ec5e CRED: Separate task security context from task_struct
Separate the task security context from task_struct.  At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.

Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.

With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:16 +11:00
David Howells 8bbf4976b5 KEYS: Alter use of key instantiation link-to-keyring argument
Alter the use of the key instantiation and negation functions' link-to-keyring
arguments.  Currently this specifies a keyring in the target process to link
the key into, creating the keyring if it doesn't exist.  This, however, can be
a problem for copy-on-write credentials as it means that the instantiating
process can alter the credentials of the requesting process.

This patch alters the behaviour such that:

 (1) If keyctl_instantiate_key() or keyctl_negate_key() are given a specific
     keyring by ID (ringid >= 0), then that keyring will be used.

 (2) If keyctl_instantiate_key() or keyctl_negate_key() are given one of the
     special constants that refer to the requesting process's keyrings
     (KEY_SPEC_*_KEYRING, all <= 0), then:

     (a) If sys_request_key() was given a keyring to use (destringid) then the
     	 key will be attached to that keyring.

     (b) If sys_request_key() was given a NULL keyring, then the key being
     	 instantiated will be attached to the default keyring as set by
     	 keyctl_set_reqkey_keyring().

 (3) No extra link will be made.

Decision point (1) follows current behaviour, and allows those instantiators
who've searched for a specifically named keyring in the requestor's keyring so
as to partition the keys by type to still have their named keyrings.

Decision point (2) allows the requestor to make sure that the key or keys that
get produced by request_key() go where they want, whilst allowing the
instantiator to request that the key is retained.  This is mainly useful for
situations where the instantiator makes a secondary request, the key for which
should be retained by the initial requestor:

	+-----------+        +--------------+        +--------------+
	|           |        |              |        |              |
	| Requestor |------->| Instantiator |------->| Instantiator |
	|           |        |              |        |              |
	+-----------+        +--------------+        +--------------+
	           request_key()           request_key()

This might be useful, for example, in Kerberos, where the requestor requests a
ticket, and then the ticket instantiator requests the TGT, which someone else
then has to go and fetch.  The TGT, however, should be retained in the
keyrings of the requestor, not the first instantiator.  To make this explict
an extra special keyring constant is also added.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:39:14 +11:00
David Howells 69664cf16a keys: don't generate user and user session keyrings unless they're accessed
Don't generate the per-UID user and user session keyrings unless they're
explicitly accessed.  This solves a problem during a login process whereby
set*uid() is called before the SELinux PAM module, resulting in the per-UID
keyrings having the wrong security labels.

This also cures the problem of multiple per-UID keyrings sometimes appearing
due to PAM modules (including pam_keyinit) setuiding and causing user_structs
to come into and go out of existence whilst the session keyring pins the user
keyring.  This is achieved by first searching for extant per-UID keyrings
before inventing new ones.

The serial bound argument is also dropped from find_keyring_by_name() as it's
not currently made use of (setting it to 0 disables the feature).

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <kwc@citi.umich.edu>
Cc: <arunsr@cse.iitk.ac.in>
Cc: <dwalsh@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:17 -07:00
David Howells e231c2ee64 Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using:

perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security`

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:26 -08:00
David Howells 76181c134f KEYS: Make request_key() and co fundamentally asynchronous
Make request_key() and co fundamentally asynchronous to make it easier for
NFS to make use of them.  There are now accessor functions that do
asynchronous constructions, a wait function to wait for construction to
complete, and a completion function for the key type to indicate completion
of construction.

Note that the construction queue is now gone.  Instead, keys under
construction are linked in to the appropriate keyring in advance, and that
anyone encountering one must wait for it to be complete before they can use
it.  This is done automatically for userspace.

The following auxiliary changes are also made:

 (1) Key type implementation stuff is split from linux/key.h into
     linux/key-type.h.

 (2) AF_RXRPC provides a way to allocate null rxrpc-type keys so that AFS does
     not need to call key_instantiate_and_link() directly.

 (3) Adjust the debugging macros so that they're -Wformat checked even if
     they are disabled, and make it so they can be enabled simply by defining
     __KDEBUG to be consistent with other code of mine.

 (3) Documentation.

[alan@lxorguk.ukuu.org.uk: keys: missing word in documentation]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Peter Zijlstra 6cfd76a26d [PATCH] lockdep: name some old style locks
Name some of the remaning 'old_style_spin_init' locks

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:36 -08:00
David Howells 7e047ef5fe [PATCH] keys: sort out key quota system
Add the ability for key creation to overrun the user's quota in some
circumstances - notably when a session keyring is created and assigned to a
process that didn't previously have one.

This means it's still possible to log in, should PAM require the creation of a
new session keyring, and fix an overburdened key quota.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
David Howells 04c567d931 [PATCH] Keys: Fix race between two instantiators of a key
Add a revocation notification method to the key type and calls it whilst
the key's semaphore is still write-locked after setting the revocation
flag.

The patch then uses this to maintain a reference on the task_struct of the
process that calls request_key() for as long as the authorisation key
remains unrevoked.

This fixes a potential race between two processes both of which have
assumed the authority to instantiate a key (one may have forked the other
for example).  The problem is that there's no locking around the check for
revocation of the auth key and the use of the task_struct it points to, nor
does the auth key keep a reference on the task_struct.

Access to the "context" pointer in the auth key must thenceforth be done
with the auth key semaphore held.  The revocation method is called with the
target key semaphore held write-locked and the search of the context
process's keyrings is done with the auth key semaphore read-locked.

The check for the revocation state of the auth key just prior to searching
it is done after the auth key is read-locked for the search.  This ensures
that the auth key can't be revoked between the check and the search.

The revocation notification method is added so that the context task_struct
can be released as soon as instantiation happens rather than waiting for
the auth key to be destroyed, thus avoiding the unnecessary pinning of the
requesting process.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:56 -07:00
Michael LeMay d720024e94 [PATCH] selinux: add hooks for key subsystem
Introduce SELinux hooks to support the access key retention subsystem
within the kernel.  Incorporate new flask headers from a modified version
of the SELinux reference policy, with support for the new security class
representing retained keys.  Extend the "key_alloc" security hook with a
task parameter representing the intended ownership context for the key
being allocated.  Attach security information to root's default keyrings
within the SELinux initialization routine.

Has passed David's testsuite.

Signed-off-by: Michael LeMay <mdlemay@epoch.ncsc.mil>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:55 -07:00
David Howells 1a26feb962 [PATCH] Keys: Improve usage of memory barriers and remove IRQ disablement
Remove an unnecessary memory barrier (implicit in rcu_dereference()) from
install_session_keyring().

install_session_keyring() is also rearranged a little to make it slightly
more efficient.

As install_*_keyring() may schedule (in synchronize_rcu() or
keyring_alloc()), they may not be entered with interrupts disabled - and so
there's no point saving the interrupt disablement state over the critical
section.

exec_keys() will also be invoked with interrupts enabled, and so that doesn't
need to save the interrupt state either.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:45 -07:00
Ingo Molnar bb0030797f [PATCH] sem2mutex: security/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Cc: James Morris <jmorris@namei.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:54:06 -08:00
David Howells b5f545c880 [PATCH] keys: Permit running process to instantiate keys
Make it possible for a running process (such as gssapid) to be able to
instantiate a key, as was requested by Trond Myklebust for NFS4.

The patch makes the following changes:

 (1) A new, optional key type method has been added. This permits a key type
     to intercept requests at the point /sbin/request-key is about to be
     spawned and do something else with them - passing them over the
     rpc_pipefs files or netlink sockets for instance.

     The uninstantiated key, the authorisation key and the intended operation
     name are passed to the method.

 (2) The callout_info is no longer passed as an argument to /sbin/request-key
     to prevent unauthorised viewing of this data using ps or by looking in
     /proc/pid/cmdline.

     This means that the old /sbin/request-key program will not work with the
     patched kernel as it will expect to see an extra argument that is no
     longer there.

     A revised keyutils package will be made available tomorrow.

 (3) The callout_info is now attached to the authorisation key. Reading this
     key will retrieve the information.

 (4) A new field has been added to the task_struct. This holds the
     authorisation key currently active for a thread. Searches now look here
     for the caller's set of keys rather than looking for an auth key in the
     lowest level of the session keyring.

     This permits a thread to be servicing multiple requests at once and to
     switch between them. Note that this is per-thread, not per-process, and
     so is usable in multithreaded programs.

     The setting of this field is inherited across fork and exec.

 (5) A new keyctl function (KEYCTL_ASSUME_AUTHORITY) has been added that
     permits a thread to assume the authority to deal with an uninstantiated
     key. Assumption is only permitted if the authorisation key associated
     with the uninstantiated key is somewhere in the thread's keyrings.

     This function can also clear the assumption.

 (6) A new magic key specifier has been added to refer to the currently
     assumed authorisation key (KEY_SPEC_REQKEY_AUTH_KEY).

 (7) Instantiation will only proceed if the appropriate authorisation key is
     assumed first. The assumed authorisation key is discarded if
     instantiation is successful.

 (8) key_validate() is moved from the file of request_key functions to the
     file of permissions functions.

 (9) The documentation is updated.

From: <Valdis.Kletnieks@vt.edu>

    Build fix.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:53 -08:00
David Howells 29db919063 [PATCH] Keys: Add LSM hooks for key management [try #3]
The attached patch adds LSM hooks for key management facilities. The notable
changes are:

 (1) The key struct now supports a security pointer for the use of security
     modules. This will permit key labelling and restrictions on which
     programs may access a key.

 (2) Security modules get a chance to note (or abort) the allocation of a key.

 (3) The key permission checking can now be enhanced by the security modules;
     the permissions check consults LSM if all other checks bear out.

 (4) The key permissions checking functions now return an error code rather
     than a boolean value.

 (5) An extra permission has been added to govern the modification of
     attributes (UID, GID, permissions).

Note that there isn't an LSM hook specifically for each keyctl() operation,
but rather the permissions hook allows control of individual operations based
on the permission request bits.

Key management access control through LSM is enabled by automatically if both
CONFIG_KEYS and CONFIG_SECURITY are enabled.

This should be applied on top of the patch ensubjected:

	[PATCH] Keys: Possessor permissions should be additive

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:23 -08:00
David Howells 664cceb009 [PATCH] Keys: Add possessor permissions to keys [try #3]
The attached patch adds extra permission grants to keys for the possessor of a
key in addition to the owner, group and other permissions bits. This makes
SUID binaries easier to support without going as far as labelling keys and key
targets using the LSM facilities.

This patch adds a second "pointer type" to key structures (struct key_ref *)
that can have the bottom bit of the address set to indicate the possession of
a key. This is propagated through searches from the keyring to the discovered
key. It has been made a separate type so that the compiler can spot attempts
to dereference a potentially incorrect pointer.

The "possession" attribute can't be attached to a key structure directly as
it's not an intrinsic property of a key.

Pointers to keys have been replaced with struct key_ref *'s wherever
possession information needs to be passed through.

This does assume that the bottom bit of the pointer will always be zero on
return from kmem_cache_alloc().

The key reference type has been made into a typedef so that at least it can be
located in the sources, even though it's basically a pointer to an undefined
type. I've also renamed the accessor functions to be more useful, and all
reference variables should now end in "_ref".

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 09:10:47 -07:00
David Howells bcf945d36f [PATCH] Error during attempt to join key management session can leave semaphore pinned
The attached patch prevents an error during the key session joining operation
from hanging future joins in the D state [CAN-2005-2098].

The problem is that the error handling path for the KEYCTL_JOIN_SESSION_KEYRING
operation has one error path that doesn't release the session management
semaphore. Further attempts to get the semaphore will then sleep for ever in
the D state.

This can happen in four situations, all involving an attempt to allocate a new
session keyring:

 (1) ENOMEM.

 (2) The users key quota being reached.

 (3) A keyring name that is an empty string.

 (4) A keyring name that is too long.

Any user may attempt this operation, and so any user can cause the problem to
occur.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 13:11:14 -07:00
Paul E. McKenney b2b1866006 [PATCH] RCU: clean up a few remaining synchronize_kernel() calls
2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not
all) in comments.  This patch changes these synchronize_kernel() calls (and
comments) to synchronize_rcu() or synchronize_sched() as follows:

- arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to
  handle races with machine-check exceptions (synchronize_rcu() would not cut
  it given RCU implementations intended for hardcore realtime use.

- drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to
  handle races with i8042_interrupt() interrupt handler.  Again,
  synchronize_rcu() would not cut it given RCU implementations intended for
  hardcore realtime use.

- include/*/kdebug.h comments: change to synchronize_sched() to handle races
  with NMIs.  As before, synchronize_rcu() would not cut it...

- include/linux/list.h comment: change to synchronize_rcu(), since this
  comment is for list_del_rcu().

- security/keys/key.c unregister_key_type(): change to synchronize_rcu(),
  since this is interacting with RCU read side.

- security/keys/process_keys.c install_session_keyring(): change to
  synchronize_rcu(), since this is interacting with RCU read side.

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:38 -07:00
David Howells 3e30148c3d [PATCH] Keys: Make request-key create an authorisation key
The attached patch makes the following changes:

 (1) There's a new special key type called ".request_key_auth".

     This is an authorisation key for when one process requests a key and
     another process is started to construct it. This type of key cannot be
     created by the user; nor can it be requested by kernel services.

     Authorisation keys hold two references:

     (a) Each refers to a key being constructed. When the key being
     	 constructed is instantiated the authorisation key is revoked,
     	 rendering it of no further use.

     (b) The "authorising process". This is either:

     	 (i) the process that called request_key(), or:

     	 (ii) if the process that called request_key() itself had an
     	      authorisation key in its session keyring, then the authorising
     	      process referred to by that authorisation key will also be
     	      referred to by the new authorisation key.

	 This means that the process that initiated a chain of key requests
	 will authorise the lot of them, and will, by default, wind up with
	 the keys obtained from them in its keyrings.

 (2) request_key() creates an authorisation key which is then passed to
     /sbin/request-key in as part of a new session keyring.

 (3) When request_key() is searching for a key to hand back to the caller, if
     it comes across an authorisation key in the session keyring of the
     calling process, it will also search the keyrings of the process
     specified therein and it will use the specified process's credentials
     (fsuid, fsgid, groups) to do that rather than the calling process's
     credentials.

     This allows a process started by /sbin/request-key to find keys belonging
     to the authorising process.

 (4) A key can be read, even if the process executing KEYCTL_READ doesn't have
     direct read or search permission if that key is contained within the
     keyrings of a process specified by an authorisation key found within the
     calling process's session keyring, and is searchable using the
     credentials of the authorising process.

     This allows a process started by /sbin/request-key to read keys belonging
     to the authorising process.

 (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or
     KEYCTL_NEGATE will specify a keyring of the authorising process, rather
     than the process doing the instantiation.

 (6) One of the process keyrings can be nominated as the default to which
     request_key() should attach new keys if not otherwise specified. This is
     done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_*
     constants. The current setting can also be read using this call.

 (7) request_key() is partially interruptible. If it is waiting for another
     process to finish constructing a key, it can be interrupted. This permits
     a request-key cycle to be broken without recourse to rebooting.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:19 -07:00
David Howells 8589b4e00e [PATCH] Keys: Use RCU to manage session keyring pointer
The attached patch uses RCU to manage the session keyring pointer in struct
signal_struct.  This means that searching need not disable interrupts and get
a the sighand spinlock to access this pointer.  Furthermore, by judicious use
of rcu_read_(un)lock(), this patch also avoids the need to take and put
refcounts on the session keyring itself, thus saving on even more atomic ops.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:18 -07:00
David Howells 76d8aeabfe [PATCH] keys: Discard key spinlock and use RCU for key payload
The attached patch changes the key implementation in a number of ways:

 (1) It removes the spinlock from the key structure.

 (2) The key flags are now accessed using atomic bitops instead of
     write-locking the key spinlock and using C bitwise operators.

     The three instantiation flags are dealt with with the construction
     semaphore held during the request_key/instantiate/negate sequence, thus
     rendering the spinlock superfluous.

     The key flags are also now bit numbers not bit masks.

 (3) The key payload is now accessed using RCU. This permits the recursive
     keyring search algorithm to be simplified greatly since no locks need be
     taken other than the usual RCU preemption disablement. Searching now does
     not require any locks or semaphores to be held; merely that the starting
     keyring be pinned.

 (4) The keyring payload now includes an RCU head so that it can be disposed
     of by call_rcu(). This requires that the payload be copied on unlink to
     prevent introducing races in copy-down vs search-up.

 (5) The user key payload is now a structure with the data following it. It
     includes an RCU head like the keyring payload and for the same reason. It
     also contains a data length because the data length in the key may be
     changed on another CPU whilst an RCU protected read is in progress on the
     payload. This would then see the supposed RCU payload and the on-key data
     length getting out of sync.

     I'm tempted to drop the key's datalen entirely, except that it's used in
     conjunction with quota management and so is a little tricky to get rid
     of.

 (6) Update the keys documentation.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:18 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00