Граф коммитов

204 Коммитов

Автор SHA1 Сообщение Дата
Sha Zhengju 58cf188ed6 memcg, oom: provide more precise dump info while memcg oom happening
Currently when a memcg oom is happening the oom dump messages is still
global state and provides few useful info for users.  This patch prints
more pointed memcg page statistics for memcg-oom and take hierarchy into
consideration:

Based on Michal's advice, we take hierarchy into consideration: supppose
we trigger an OOM on A's limit

        root_memcg
            |
            A (use_hierachy=1)
           / \
          B   C
          |
          D
then the printed info will be:

  Memory cgroup stats for /A:...
  Memory cgroup stats for /A/B:...
  Memory cgroup stats for /A/C:...
  Memory cgroup stats for /A/B/D:...

Following are samples of oom output:

(1) Before change:

    mal-80 invoked oom-killer:gfp_mask=0xd0, order=0, oom_score_adj=0
    mal-80 cpuset=/ mems_allowed=0
    Pid: 2976, comm: mal-80 Not tainted 3.7.0+ #10
    Call Trace:
     [<ffffffff8167fbfb>] dump_header+0x83/0x1ca
     ..... (call trace)
     [<ffffffff8168a818>] page_fault+0x28/0x30
                             <<<<<<<<<<<<<<<<<<<<< memcg specific information
    Task in /A/B/D killed as a result of limit of /A
    memory: usage 101376kB, limit 101376kB, failcnt 57
    memory+swap: usage 101376kB, limit 101376kB, failcnt 0
    kmem: usage 0kB, limit 9007199254740991kB, failcnt 0
                             <<<<<<<<<<<<<<<<<<<<< print per cpu pageset stat
    Mem-Info:
    Node 0 DMA per-cpu:
    CPU    0: hi:    0, btch:   1 usd:   0
    ......
    CPU    3: hi:    0, btch:   1 usd:   0
    Node 0 DMA32 per-cpu:
    CPU    0: hi:  186, btch:  31 usd: 173
    ......
    CPU    3: hi:  186, btch:  31 usd: 130
                             <<<<<<<<<<<<<<<<<<<<< print global page state
    active_anon:92963 inactive_anon:40777 isolated_anon:0
     active_file:33027 inactive_file:51718 isolated_file:0
     unevictable:0 dirty:3 writeback:0 unstable:0
     free:729995 slab_reclaimable:6897 slab_unreclaimable:6263
     mapped:20278 shmem:35971 pagetables:5885 bounce:0
     free_cma:0
                             <<<<<<<<<<<<<<<<<<<<< print per zone page state
    Node 0 DMA free:15836kB ... all_unreclaimable? no
    lowmem_reserve[]: 0 3175 3899 3899
    Node 0 DMA32 free:2888564kB ... all_unrelaimable? no
    lowmem_reserve[]: 0 0 724 724
    lowmem_reserve[]: 0 0 0 0
    Node 0 DMA: 1*4kB (U) ... 3*4096kB (M) = 15836kB
    Node 0 DMA32: 41*4kB (UM) ... 702*4096kB (MR) = 2888316kB
    120710 total pagecache pages
    0 pages in swap cache
                             <<<<<<<<<<<<<<<<<<<<< print global swap cache stat
    Swap cache stats: add 0, delete 0, find 0/0
    Free swap  = 499708kB
    Total swap = 499708kB
    1040368 pages RAM
    58678 pages reserved
    169065 pages shared
    173632 pages non-shared
    [ pid ]   uid  tgid total_vm      rss nr_ptes swapents oom_score_adj name
    [ 2693]     0  2693     6005     1324      17        0             0 god
    [ 2754]     0  2754     6003     1320      16        0             0 god
    [ 2811]     0  2811     5992     1304      18        0             0 god
    [ 2874]     0  2874     6005     1323      18        0             0 god
    [ 2935]     0  2935     8720     7742      21        0             0 mal-30
    [ 2976]     0  2976    21520    17577      42        0             0 mal-80
    Memory cgroup out of memory: Kill process 2976 (mal-80) score 665 or sacrifice child
    Killed process 2976 (mal-80) total-vm:86080kB, anon-rss:69964kB, file-rss:344kB

We can see that messages dumped by show_free_areas() are longsome and can
provide so limited info for memcg that just happen oom.

(2) After change
    mal-80 invoked oom-killer: gfp_mask=0xd0, order=0, oom_score_adj=0
    mal-80 cpuset=/ mems_allowed=0
    Pid: 2704, comm: mal-80 Not tainted 3.7.0+ #10
    Call Trace:
     [<ffffffff8167fd0b>] dump_header+0x83/0x1d1
     .......(call trace)
     [<ffffffff8168a918>] page_fault+0x28/0x30
    Task in /A/B/D killed as a result of limit of /A
                             <<<<<<<<<<<<<<<<<<<<< memcg specific information
    memory: usage 102400kB, limit 102400kB, failcnt 140
    memory+swap: usage 102400kB, limit 102400kB, failcnt 0
    kmem: usage 0kB, limit 9007199254740991kB, failcnt 0
    Memory cgroup stats for /A: cache:32KB rss:30984KB mapped_file:0KB swap:0KB inactive_anon:6912KB active_anon:24072KB inactive_file:32KB active_file:0KB unevictable:0KB
    Memory cgroup stats for /A/B: cache:0KB rss:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
    Memory cgroup stats for /A/C: cache:0KB rss:0KB mapped_file:0KB swap:0KB inactive_anon:0KB active_anon:0KB inactive_file:0KB active_file:0KB unevictable:0KB
    Memory cgroup stats for /A/B/D: cache:32KB rss:71352KB mapped_file:0KB swap:0KB inactive_anon:6656KB active_anon:64696KB inactive_file:16KB active_file:16KB unevictable:0KB
    [ pid ]   uid  tgid total_vm      rss nr_ptes swapents oom_score_adj name
    [ 2260]     0  2260     6006     1325      18        0             0 god
    [ 2383]     0  2383     6003     1319      17        0             0 god
    [ 2503]     0  2503     6004     1321      18        0             0 god
    [ 2622]     0  2622     6004     1321      16        0             0 god
    [ 2695]     0  2695     8720     7741      22        0             0 mal-30
    [ 2704]     0  2704    21520    17839      43        0             0 mal-80
    Memory cgroup out of memory: Kill process 2704 (mal-80) score 669 or sacrifice child
    Killed process 2704 (mal-80) total-vm:86080kB, anon-rss:71016kB, file-rss:340kB

This version provides more pointed info for memcg in "Memory cgroup stats
for XXX" section.

Signed-off-by: Sha Zhengju <handai.szj@taobao.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23 17:50:08 -08:00
David Rientjes 0fa84a4bfa mm, oom: remove redundant sleep in pagefault oom handler
out_of_memory() will already cause current to schedule if it has not been
killed, so doing it again in pagefault_out_of_memory() is redundant.
Remove it.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:34 -08:00
David Rientjes efacd02e4f mm, oom: cleanup pagefault oom handler
To lock the entire system from parallel oom killing, it's possible to pass
in a zonelist with all zones rather than using for_each_populated_zone()
for the iteration.  This obsoletes try_set_system_oom() and
clear_system_oom() so that they can be removed.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:34 -08:00
Lai Jiangshan bd3a66c1cd oom: use N_MEMORY instead N_HIGH_MEMORY
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.

The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 17:38:32 -08:00
David Rientjes e1e12d2f31 mm, oom: fix race when specifying a thread as the oom origin
test_set_oom_score_adj() and compare_swap_oom_score_adj() are used to
specify that current should be killed first if an oom condition occurs in
between the two calls.

The usage is

	short oom_score_adj = test_set_oom_score_adj(OOM_SCORE_ADJ_MAX);
	...
	compare_swap_oom_score_adj(OOM_SCORE_ADJ_MAX, oom_score_adj);

to store the thread's oom_score_adj, temporarily change it to the maximum
score possible, and then restore the old value if it is still the same.

This happens to still be racy, however, if the user writes
OOM_SCORE_ADJ_MAX to /proc/pid/oom_score_adj in between the two calls.
The compare_swap_oom_score_adj() will then incorrectly reset the old value
prior to the write of OOM_SCORE_ADJ_MAX.

To fix this, introduce a new oom_flags_t member in struct signal_struct
that will be used for per-thread oom killer flags.  KSM and swapoff can
now use a bit in this member to specify that threads should be killed
first in oom conditions without playing around with oom_score_adj.

This also allows the correct oom_score_adj to always be shown when reading
/proc/pid/oom_score.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:27 -08:00
David Rientjes a9c58b907d mm, oom: change type of oom_score_adj to short
The maximum oom_score_adj is 1000 and the minimum oom_score_adj is -1000,
so this range can be represented by the signed short type with no
functional change.  The extra space this frees up in struct signal_struct
will be used for per-thread oom kill flags in the next patch.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:27 -08:00
David Rientjes 9ff4868e30 mm, oom: allow exiting threads to have access to memory reserves
Exiting threads, those with PF_EXITING set, can pagefault and require
memory before they can make forward progress.  This happens, for instance,
when a process must fault task->robust_list, a userspace structure, before
detaching its memory.

These threads also aren't guaranteed to get access to memory reserves
unless oom killed or killed from userspace.  The oom killer won't grant
memory reserves if other threads are also exiting other than current and
stalling at the same point.  This prevents needlessly killing processes
when others are already exiting.

Instead of special casing all the possible situations between PF_EXITING
getting set and a thread detaching its mm where it may allocate memory,
which probably wouldn't get updated when a change is made to the exit
path, the solution is to give all exiting threads access to memory
reserves if they call the oom killer.  This allows them to quickly
allocate, detach its mm, and free the memory it represents.

Summary of Luigi's bug report:

: He had an oom condition where threads were faulting on task->robust_list
: and repeatedly called the oom killer but it would defer killing a thread
: because it saw other PF_EXITING threads.  This can happen anytime we need
: to allocate memory after setting PF_EXITING and before detaching our mm;
: if there are other threads in the same state then the oom killer won't do
: anything unless one of them happens to be killed from userspace.
:
: So instead of only deferring for PF_EXITING and !task->robust_list, it's
: better to just give them access to memory reserves to prevent a potential
: livelock so that any other faults that may be introduced in the future in
: the exit path don't cause the same problem (and hopefully we don't allow
: too many of those!).

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Tested-by: Luigi Semenzato <semenzato@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:24 -08:00
Davidlohr Bueso 01dc52ebdf oom: remove deprecated oom_adj
The deprecated /proc/<pid>/oom_adj is scheduled for removal this month.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:24 +09:00
David Rientjes 876aafbfd9 mm, memcg: move all oom handling to memcontrol.c
By globally defining check_panic_on_oom(), the memcg oom handler can be
moved entirely to mm/memcontrol.c.  This removes the ugly #ifdef in the
oom killer and cleans up the code.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:45 -07:00
David Rientjes 6b0c81b3be mm, oom: reduce dependency on tasklist_lock
Since exiting tasks require write_lock_irq(&tasklist_lock) several times,
try to reduce the amount of time the readside is held for oom kills.  This
makes the interface with the memcg oom handler more consistent since it
now never needs to take tasklist_lock unnecessarily.

The only time the oom killer now takes tasklist_lock is when iterating the
children of the selected task, everything else is protected by
rcu_read_lock().

This requires that a reference to the selected process, p, is grabbed
before calling oom_kill_process().  It may release it and grab a reference
on another one of p's threads if !p->mm, but it also guarantees that it
will release the reference before returning.

[hughd@google.com: fix duplicate put_task_struct()]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:44 -07:00
David Rientjes 9cbb78bb31 mm, memcg: introduce own oom handler to iterate only over its own threads
The global oom killer is serialized by the per-zonelist
try_set_zonelist_oom() which is used in the page allocator.  Concurrent
oom kills are thus a rare event and only occur in systems using
mempolicies and with a large number of nodes.

Memory controller oom kills, however, can frequently be concurrent since
there is no serialization once the oom killer is called for oom conditions
in several different memcgs in parallel.

This creates a massive contention on tasklist_lock since the oom killer
requires the readside for the tasklist iteration.  If several memcgs are
calling the oom killer, this lock can be held for a substantial amount of
time, especially if threads continue to enter it as other threads are
exiting.

Since the exit path grabs the writeside of the lock with irqs disabled in
a few different places, this can cause a soft lockup on cpus as a result
of tasklist_lock starvation.

The kernel lacks unfair writelocks, and successful calls to the oom killer
usually result in at least one thread entering the exit path, so an
alternative solution is needed.

This patch introduces a seperate oom handler for memcgs so that they do
not require tasklist_lock for as much time.  Instead, it iterates only
over the threads attached to the oom memcg and grabs a reference to the
selected thread before calling oom_kill_process() to ensure it doesn't
prematurely exit.

This still requires tasklist_lock for the tasklist dump, iterating
children of the selected process, and killing all other threads on the
system sharing the same memory as the selected victim.  So while this
isn't a complete solution to tasklist_lock starvation, it significantly
reduces the amount of time that it is held.

Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Sha Zhengju <handai.szj@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:44 -07:00
David Rientjes 462607ecc5 mm, oom: introduce helper function to process threads during scan
This patch introduces a helper function to process each thread during the
iteration over the tasklist.  A new return type, enum oom_scan_t, is
defined to determine the future behavior of the iteration:

 - OOM_SCAN_OK: continue scanning the thread and find its badness,

 - OOM_SCAN_CONTINUE: do not consider this thread for oom kill, it's
   ineligible,

 - OOM_SCAN_ABORT: abort the iteration and return, or

 - OOM_SCAN_SELECT: always select this thread with the highest badness
   possible.

There is no functional change with this patch.  This new helper function
will be used in the next patch in the memory controller.

Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Sha Zhengju <handai.szj@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:44 -07:00
Andrew Morton c255a45805 memcg: rename config variables
Sanity:

CONFIG_CGROUP_MEM_RES_CTLR -> CONFIG_MEMCG
CONFIG_CGROUP_MEM_RES_CTLR_SWAP -> CONFIG_MEMCG_SWAP
CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED -> CONFIG_MEMCG_SWAP_ENABLED
CONFIG_CGROUP_MEM_RES_CTLR_KMEM -> CONFIG_MEMCG_KMEM

[mhocko@suse.cz: fix missed bits]
Cc: Glauber Costa <glommer@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:43 -07:00
David Rientjes de34d965a8 mm, oom: replace some information in tasklist dump
The number of ptes and swap entries are used in the oom killer's badness
heuristic, so they should be shown in the tasklist dump.

This patch adds those fields and replaces cpu and oom_adj values that are
currently emitted.  Cpu isn't interesting and oom_adj is deprecated and
will be removed later this year, the same information is already displayed
as oom_score_adj which is used internally.

At the same time, make the documentation a little more clear to state this
information is helpful to determine why the oom killer chose the task it
did to kill.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:42 -07:00
David Rientjes 121d1ba0a0 mm, oom: fix potential killing of thread that is disabled from oom killing
/proc/sys/vm/oom_kill_allocating_task will immediately kill current when
the oom killer is called to avoid a potentially expensive tasklist scan
for large systems.

Currently, however, it is not checking current's oom_score_adj value which
may be OOM_SCORE_ADJ_MIN, meaning that it has been disabled from oom
killing.

This patch avoids killing current in such a condition and simply falls
back to the tasklist scan since memory still needs to be freed.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:42 -07:00
David Rientjes 4f774b912d mm, oom: do not schedule if current has been killed
The oom killer currently schedules away from current in an uninterruptible
sleep if it does not have access to memory reserves.  It's possible that
current was killed because it shares memory with the oom killed thread or
because it was killed by the user in the interim, however.

This patch only schedules away from current if it does not have a pending
kill, i.e.  if it does not share memory with the oom killed thread.  It's
possible that it will immediately retry its memory allocation and fail,
but it will immediately be given access to memory reserves if it calls the
oom killer again.

This prevents the delay of memory freeing when threads that share memory
with the oom killed thread get unnecessarily scheduled.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:41 -07:00
Wanpeng Li dad7557eb7 mm: fix kernel-doc warnings
Fix kernel-doc warnings such as

  Warning(../mm/page_cgroup.c:432): No description found for parameter 'id'
  Warning(../mm/page_cgroup.c:432): Excess function parameter 'mem' description in 'swap_cgroup_record'

Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
David Rientjes 61eafb00d5 mm, oom: fix and cleanup oom score calculations
The divide in p->signal->oom_score_adj * totalpages / 1000 within
oom_badness() was causing an overflow of the signed long data type.

This adds both the root bias and p->signal->oom_score_adj before doing the
normalization which fixes the issue and also cleans up the calculation.

Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:35 -07:00
David Rientjes 1e11ad8dc4 mm, oom: fix badness score underflow
If the privileges given to root threads (3% of allowable memory) or a
negative value of /proc/pid/oom_score_adj happen to exceed the amount of
rss of a thread, its badness score overflows as a result of commit
a7f638f999 ("mm, oom: normalize oom scores to oom_score_adj scale only
for userspace").

Fix this by making the type signed and return 1, meaning the thread is
still eligible for kill, if the value is negative.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-08 15:07:35 -07:00
David Rientjes a7f638f999 mm, oom: normalize oom scores to oom_score_adj scale only for userspace
The oom_score_adj scale ranges from -1000 to 1000 and represents the
proportion of memory available to the process at allocation time.  This
means an oom_score_adj value of 300, for example, will bias a process as
though it was using an extra 30.0% of available memory and a value of
-350 will discount 35.0% of available memory from its usage.

The oom killer badness heuristic also uses this scale to report the oom
score for each eligible process in determining the "best" process to
kill.  Thus, it can only differentiate each process's memory usage by
0.1% of system RAM.

On large systems, this can end up being a large amount of memory: 256MB
on 256GB systems, for example.

This can be fixed by having the badness heuristic to use the actual
memory usage in scoring threads and then normalizing it to the
oom_score_adj scale for userspace.  This results in better comparison
between eligible threads for kill and no change from the userspace
perspective.

Suggested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:24 -07:00
Eric W. Biederman 078de5f706 userns: Store uid and gid values in struct cred with kuid_t and kgid_t types
cred.h and a few trivial users of struct cred are changed.  The rest of the users
of struct cred are left for other patches as there are too many changes to make
in one go and leave the change reviewable.  If the user namespace is disabled and
CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile
and behave correctly.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:28:38 -07:00
Oleg Nesterov d2d393099d signal: oom_kill_task: use SEND_SIG_FORCED instead of force_sig()
Change oom_kill_task() to use do_send_sig_info(SEND_SIG_FORCED) instead
of force_sig(SIGKILL).  With the recent changes we do not need force_ to
kill the CLONE_NEWPID tasks.

And this is more correct.  force_sig() can race with the exiting thread
even if oom_kill_task() checks p->mm != NULL, while
do_send_sig_info(group => true) kille the whole process.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:41 -07:00
David Rientjes e845e19936 mm, memcg: pass charge order to oom killer
The oom killer typically displays the allocation order at the time of oom
as a part of its diangostic messages (for global, cpuset, and mempolicy
ooms).

The memory controller may also pass the charge order to the oom killer so
it can emit the same information.  This is useful in determining how large
the memory allocation is that triggered the oom killer.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:59 -07:00
David Rientjes 08ab9b10d4 mm, oom: force oom kill on sysrq+f
The oom killer chooses not to kill a thread if:

 - an eligible thread has already been oom killed and has yet to exit,
   and

 - an eligible thread is exiting but has yet to free all its memory and
   is not the thread attempting to currently allocate memory.

SysRq+F manually invokes the global oom killer to kill a memory-hogging
task.  This is normally done as a last resort to free memory when no
progress is being made or to test the oom killer itself.

For both uses, we always want to kill a thread and never defer.  This
patch causes SysRq+F to always kill an eligible thread and can be used to
force a kill even if another oom killed thread has failed to exit.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:58 -07:00
David Rientjes dc3f21eade mm, oom: introduce independent oom killer ratelimit state
printk_ratelimit() uses the global ratelimit state for all printks.  The
oom killer should not be subjected to this state just because another
subsystem or driver may be flooding the kernel log.

This patch introduces printk ratelimiting specifically for the oom killer.

Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes 8447d950e7 mm, oom: do not emit oom killer warning if chosen thread is already exiting
If a thread is chosen for oom kill and is already PF_EXITING, then the oom
killer simply sets TIF_MEMDIE and returns.  This allows the thread to have
access to memory reserves so that it may quickly exit.  This logic is
preceeded with a comment saying there's no need to alarm the sysadmin.
This patch adds truth to that statement.

There's no need to emit any warning about the oom condition if the thread
is already exiting since it will not be killed.  In this condition, just
silently return the oom killer since its only giving access to memory
reserves and is otherwise a no-op.

Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes 647f2bdf4a mm, oom: fold oom_kill_task() into oom_kill_process()
oom_kill_task() has a single caller, so fold it into its parent function,
oom_kill_process().  Slightly reduces the number of lines in the oom
killer.

Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
David Rientjes 2a1c9b1fc0 mm, oom: avoid looping when chosen thread detaches its mm
oom_kill_task() returns non-zero iff the chosen process does not have any
threads with an attached ->mm.

In such a case, it's better to just return to the page allocator and retry
the allocation because memory could have been freed in the interim and the
oom condition may no longer exist.  It's unnecessary to loop in the oom
killer and find another thread to kill.

This allows both oom_kill_task() and oom_kill_process() to be converted to
void functions.  If the oom condition persists, the oom killer will be
recalled.

Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:54:55 -07:00
Johannes Weiner 72835c86ca mm: unify remaining mem_cont, mem, etc. variable names to memcg
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:06 -08:00
Johannes Weiner ec0fffd84b mm: oom_kill: remove memcg argument from oom_kill_task()
The memcg argument of oom_kill_task() hasn't been used since 341aea2
'oom-kill: remove boost_dying_task_prio()'.  Kill it.

Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12 20:13:06 -08:00
KAMEZAWA Hiroyuki 43d2b11324 tracepoint: add tracepoints for debugging oom_score_adj
oom_score_adj is used for guarding processes from OOM-Killer.  One of
problem is that it's inherited at fork().  When a daemon set oom_score_adj
and make children, it's hard to know where the value is set.

This patch adds some tracepoints useful for debugging. This patch adds
3 trace points.
  - creating new task
  - renaming a task (exec)
  - set oom_score_adj

To debug, users need to enable some trace pointer. Maybe filtering is useful as

# EVENT=/sys/kernel/debug/tracing/events/task/
# echo "oom_score_adj != 0" > $EVENT/task_newtask/filter
# echo "oom_score_adj != 0" > $EVENT/task_rename/filter
# echo 1 > $EVENT/enable
# EVENT=/sys/kernel/debug/tracing/events/oom/
# echo 1 > $EVENT/enable

output will be like this.
# grep oom /sys/kernel/debug/tracing/trace
bash-7699  [007] d..3  5140.744510: oom_score_adj_update: pid=7699 comm=bash oom_score_adj=-1000
bash-7699  [007] ...1  5151.818022: task_newtask: pid=7729 comm=bash clone_flags=1200011 oom_score_adj=-1000
ls-7729  [003] ...2  5151.818504: task_rename: pid=7729 oldcomm=bash newcomm=ls oom_score_adj=-1000
bash-7699  [002] ...1  5175.701468: task_newtask: pid=7730 comm=bash clone_flags=1200011 oom_score_adj=-1000
grep-7730  [007] ...2  5175.701993: task_rename: pid=7730 oldcomm=bash newcomm=grep oom_score_adj=-1000

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-10 16:30:44 -08:00
Rafael J. Wysocki b00f4dc5ff Merge branch 'master' into pm-sleep
* master: (848 commits)
  SELinux: Fix RCU deref check warning in sel_netport_insert()
  binary_sysctl(): fix memory leak
  mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
  ipmi_watchdog: restore settings when BMC reset
  oom: fix integer overflow of points in oom_badness
  memcg: keep root group unchanged if creation fails
  nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
  nilfs2: unbreak compat ioctl
  cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mmc: vub300: fix type of firmware_rom_wait_states module parameter
  Revert "mmc: enable runtime PM by default"
  mmc: sdhci: remove "state" argument from sdhci_suspend_host
  x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
  IB/qib: Correct sense on freectxts increment and decrement
  RDMA/cma: Verify private data length
  cgroups: fix a css_set not found bug in cgroup_attach_proc
  oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
  Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
  ...

Conflicts:
	kernel/cgroup_freezer.c
2011-12-21 21:59:45 +01:00
Frantisek Hrbata ff05b6f7ae oom: fix integer overflow of points in oom_badness
An integer overflow will happen on 64bit archs if task's sum of rss,
swapents and nr_ptes exceeds (2^31)/1000 value.  This was introduced by
commit

f755a04 oom: use pte pages in OOM score

where the oom score computation was divided into several steps and it's no
longer computed as one expression in unsigned long(rss, swapents, nr_pte
are unsigned long), where the result value assigned to points(int) is in
range(1..1000).  So there could be an int overflow while computing

176          points *= 1000;

and points may have negative value. Meaning the oom score for a mem hog task
will be one.

196          if (points <= 0)
197                  return 1;

For example:
[ 3366]     0  3366 35390480 24303939   5       0             0 oom01
Out of memory: Kill process 3366 (oom01) score 1 or sacrifice child

Here the oom1 process consumes more than 24303939(rss)*4096~=92GB physical
memory, but it's oom score is one.

In this situation the mem hog task is skipped and oom killer kills another and
most probably innocent task with oom score greater than one.

The points variable should be of type long instead of int to prevent the
int overflow.

Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>		[2.6.36+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-20 10:25:04 -08:00
Tejun Heo a5be2d0d1a freezer: rename thaw_process() to __thaw_task() and simplify the implementation
thaw_process() now has only internal users - system and cgroup
freezers.  Remove the unnecessary return value, rename, unexport and
collapse __thaw_process() into it.  This will help further updates to
the freezer code.

-v3: oom_kill grew a use of thaw_process() while this patch was
     pending.  Convert it to use __thaw_task() for now.  In the longer
     term, this should be handled by allowing tasks to die if killed
     even if it's frozen.

-v2: minor style update as suggested by Matt.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Paul Menage <menage@google.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
2011-11-21 12:32:23 -08:00
Michal Hocko 5aecc85abd oom: do not kill tasks with oom_score_adj OOM_SCORE_ADJ_MIN
Commit c9f01245 ("oom: remove oom_disable_count") has removed the
oom_disable_count counter which has been used for early break out from
oom_badness so we could never select a task with oom_score_adj set to
OOM_SCORE_ADJ_MIN (oom disabled).

Now that the counter is gone we are always going through heuristics
calculation and we always return a non zero positive value.  This means
that we can end up killing a task with OOM disabled because it is
indistinguishable from regular tasks with 1% resp.  CAP_SYS_ADMIN tasks
with 3% usage of memory or tasks with oom_score_adj set but OOM enabled.

Let's break out early if the task should have OOM disabled.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-15 22:41:51 -02:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
David Rientjes 43362a4977 oom: fix race while temporarily setting current's oom_score_adj
test_set_oom_score_adj() was introduced in 72788c3856 ("oom: replace
PF_OOM_ORIGIN with toggling oom_score_adj") to temporarily elevate
current's oom_score_adj for ksm and swapoff without requiring an
additional per-process flag.

Using that function to both set oom_score_adj to OOM_SCORE_ADJ_MAX and
then reinstate the previous value is racy since it's possible that
userspace can set the value to something else itself before the old value
is reinstated.  That results in userspace setting current's oom_score_adj
to a different value and then the kernel immediately setting it back to
its previous value without notification.

To fix this, a new compare_swap_oom_score_adj() function is introduced
with the same semantics as the compare and swap CAS instruction, or
CMPXCHG on x86.  It is used to reinstate the previous value of
oom_score_adj if and only if the present value is the same as the old
value.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
David Rientjes c9f01245b6 oom: remove oom_disable_count
This removes mm->oom_disable_count entirely since it's unnecessary and
currently buggy.  The counter was intended to be per-process but it's
currently decremented in the exit path for each thread that exits, causing
it to underflow.

The count was originally intended to prevent oom killing threads that
share memory with threads that cannot be killed since it doesn't lead to
future memory freeing.  The counter could be fixed to represent all
threads sharing the same mm, but it's better to remove the count since:

 - it is possible that the OOM_DISABLE thread sharing memory with the
   victim is waiting on that thread to exit and will actually cause
   future memory freeing, and

 - there is no guarantee that a thread is disabled from oom killing just
   because another thread sharing its mm is oom disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
David Rientjes 7b0d44fa49 oom: avoid killing kthreads if they assume the oom killed thread's mm
After selecting a task to kill, the oom killer iterates all processes and
kills all other threads that share the same mm_struct in different thread
groups.  It would not otherwise be helpful to kill a thread if its memory
would not be subsequently freed.

A kernel thread, however, may assume a user thread's mm by using
use_mm().  This is only temporary and should not result in sending a
SIGKILL to that kthread.

This patch ensures that only user threads and not kthreads are sent a
SIGKILL if they share the same mm_struct as the oom killed task.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
David Rientjes f660daac47 oom: thaw threads if oom killed thread is frozen before deferring
If a thread has been oom killed and is frozen, thaw it before returning to
the page allocator.  Otherwise, it can stay frozen indefinitely and no
memory will be freed.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 17:30:45 -07:00
Paul Gortmaker b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Oleg Nesterov c027a474a6 oom: task->mm == NULL doesn't mean the memory was freed
exit_mm() sets ->mm == NULL then it does mmput()->exit_mmap() which
frees the memory.

However select_bad_process() checks ->mm != NULL before TIF_MEMDIE,
so it continues to kill other tasks even if we have the oom-killed
task freeing its memory.

Change select_bad_process() to check ->mm after TIF_MEMDIE, but skip
the tasks which have already passed exit_notify() to ensure a zombie
with TIF_MEMDIE set can't block oom-killer. Alternatively we could
probably clear TIF_MEMDIE after exit_mmap().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-01 15:24:12 -10:00
David Rientjes 11239836c0 oom: remove references to old badness() function
The badness() function in the oom killer was renamed to oom_badness() in
a63d83f427 ("oom: badness heuristic rewrite") since it is a globally
exported function for clarity.

The prototype for the old function still existed in linux/oom.h, so remove
it.  There are no existing users.

Also fixes documentation and comment references to badness() and adjusts
them accordingly.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:09 -07:00
Tejun Heo d21142ece4 ptrace: kill task_ptrace()
task_ptrace(task) simply dereferences task->ptrace and isn't even used
consistently only adding confusion.  Kill it and directly access
->ptrace instead.

This doesn't introduce any behavior change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2011-06-22 19:26:27 +02:00
David Rientjes 72788c3856 oom: replace PF_OOM_ORIGIN with toggling oom_score_adj
There's a kernel-wide shortage of per-process flags, so it's always
helpful to trim one when possible without incurring a significant penalty.
 It's even more important when you're planning on adding a per- process
flag yourself, which I plan to do shortly for transparent hugepages.

PF_OOM_ORIGIN is used by ksm and swapoff to prefer current since it has a
tendency to allocate large amounts of memory and should be preferred for
killing over other tasks.  We'd rather immediately kill the task making
the errant syscall rather than penalizing an innocent task.

This patch removes PF_OOM_ORIGIN since its behavior is equivalent to
setting the process's oom_score_adj to OOM_SCORE_ADJ_MAX.

The process's old oom_score_adj is stored and then set to
OOM_SCORE_ADJ_MAX during the time it used to have PF_OOM_ORIGIN.  The old
value is then reinstated when the process should no longer be considered a
high priority for oom killing.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Izik Eidus <ieidus@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:10 -07:00
KOSAKI Motohiro f755a042d8 oom: use pte pages in OOM score
PTE pages eat up memory just like anything else, but we do not account for
them in any way in the OOM scores.  They are also _guaranteed_ to get
freed up when a process is OOM killed, while RSS is not.

Reported-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>		[2.6.36+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-28 11:28:21 -07:00
KOSAKI Motohiro 341aea2bc4 oom-kill: remove boost_dying_task_prio()
This is an almost-revert of commit 93b43fa ("oom: give the dying task a
higher priority").

That commit dramatically improved oom killer logic when a fork-bomb
occurs.  But I've found that it has nasty corner case.  Now cpu cgroup has
strange default RT runtime.  It's 0!  That said, if a process under cpu
cgroup promote RT scheduling class, the process never run at all.

If an admin inserts a !RT process into a cpu cgroup by setting
rtruntime=0, usually it runs perfectly because a !RT task isn't affected
by the rtruntime knob.  But if it promotes an RT task via an explicit
setscheduler() syscall or an OOM, the task can't run at all.  In short,
the oom killer doesn't work at all if admins are using cpu cgroup and don't
touch the rtruntime knob.

Eventually, kernel may hang up when oom kill occur.  I and the original
author Luis agreed to disable this logic.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-14 16:06:56 -07:00
David Rientjes b2b755b5f1 lib, arch: add filter argument to show_mem and fix private implementations
Commit ddd588b5dd ("oom: suppress nodes that are not allowed from
meminfo on oom kill") moved lib/show_mem.o out of lib/lib.a, which
resulted in build warnings on all architectures that implement their own
versions of show_mem():

	lib/lib.a(show_mem.o): In function `show_mem':
	show_mem.c:(.text+0x1f4): multiple definition of `show_mem'
	arch/sparc/mm/built-in.o:(.text+0xd70): first defined here

The fix is to remove __show_mem() and add its argument to show_mem() in
all implementations to prevent this breakage.

Architectures that implement their own show_mem() actually don't do
anything with the argument yet, but they could be made to filter nodes
that aren't allowed in the current context in the future just like the
generic implementation.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: James Bottomley <James.Bottomley@hansenpartnership.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-24 17:49:37 -07:00
David Rientjes f9434ad155 memcg: give current access to memory reserves if it's trying to die
When a memcg is oom and current has already received a SIGKILL, then give
it access to memory reserves with a higher scheduling priority so that it
may quickly exit and free its memory.

This is identical to the global oom killer and is done even before
checking for panic_on_oom: a pending SIGKILL here while panic_on_oom is
selected is guaranteed to have come from userspace; the thread only needs
access to memory reserves to exit and thus we don't unnecessarily panic
the machine until the kernel has no last resort to free memory.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:33 -07:00
David Rientjes ddd588b5dd oom: suppress nodes that are not allowed from meminfo on oom kill
The oom killer is extremely verbose for machines with a large number of
cpus and/or nodes.  This verbosity can often be harmful if it causes other
important messages to be scrolled from the kernel log and incurs a
signicant time delay, specifically for kernels with CONFIG_NODES_SHIFT >
8.

This patch causes only memory information to be displayed for nodes that
are allowed by current's cpuset when dumping the VM state.  Information
for all other nodes is irrelevant to the oom condition; we don't care if
there's an abundance of memory elsewhere if we can't access it.

This only affects the behavior of dumping memory information when an oom
is triggered.  Other dumps, such as for sysrq+m, still display the
unfiltered form when using the existing show_mem() interface.

Additionally, the per-cpu pageset statistics are extremely verbose in oom
killer output, so it is now suppressed.  This removes

	nodes_weight(current->mems_allowed) * (1 + nr_cpus)

lines from the oom killer output.

Callers may use __show_mem(SHOW_MEM_FILTER_NODES) to filter disallowed
nodes.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:01 -07:00