Rather than playing silly buggers with vfsmount refcounts, just have
acct_on() ask fs/namespace.c for internal clone of file->f_path.mnt
and replace it with said clone. Then attach the pin to original
vfsmount. Voila - the clone will be alive until the file gets closed,
making sure that underlying superblock remains active, etc., and
we can drop the original vfsmount, so that it's not kept busy.
If the file lives until the final mntput of the original vfsmount,
we'll notice that there's an fs_pin (one in bsd_acct_struct that
holds that file) and mnt_pin_kill() will take it out. Since
->kill() is synchronous, we won't proceed past that point until
these files are closed (and private clones of our vfsmount are
gone), so we get the same ordering warranties we used to get.
mnt_pin()/mnt_unpin()/->mnt_pinned is gone now, and good riddance -
it never became usable outside of kernel/acct.c (and racy wrt
umount even there).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These externs belong in fs/internal.h. Rename (they are not acct-specific
anymore) and move them over there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new field to fs_pin - kill(pin). That's what umount and r/o remount
will be calling for all pins attached to vfsmount and superblock resp.
Called after bumping the refcount, so it won't go away under us. Dropping
the refcount is responsibility of the instance. All generic stuff moved to
fs/fs_pin.c; the next step will rip all the knowledge of kernel/acct.c from
fs/super.c and fs/namespace.c. After that - death to mnt_pin(); it was
intended to be usable as generic mechanism for code that wants to attach
objects to vfsmount, so that they would not make the sucker busy and
would get killed on umount. Never got it right; it remained acct.c-specific
all along. Now it's very close to being killable.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
just repeat the frozen check after regaining it, and check that sb
is still alive. If several threads hit acct_auto_close() at the
same time, acct_auto_close() will survive that just fine. And we
really don't want to play with writes and closing the file with
->s_umount held exclusive - it's a deadlock country.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Put these suckers on per-vfsmount and per-superblock lists instead.
Note: right now it's still acct_lock for everything, but that's
going to change.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__do_request() may unregister the request. So we should update
iterator 'p' before calling __do_request()
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Merge incoming from Andrew Morton:
- Various misc things.
- arch/sh updates.
- Part of ocfs2. Review is slow.
- Slab updates.
- Most of -mm.
- printk updates.
- lib/ updates.
- checkpatch updates.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
checkpatch: update $declaration_macros, add uninitialized_var
checkpatch: warn on missing spaces in broken up quoted
checkpatch: fix false positives for --strict "space after cast" test
checkpatch: fix false positive MISSING_BREAK warnings with --file
checkpatch: add test for native c90 types in unusual order
checkpatch: add signed generic types
checkpatch: add short int to c variable types
checkpatch: add for_each tests to indentation and brace tests
checkpatch: fix brace style misuses of else and while
checkpatch: add --fix option for a couple OPEN_BRACE misuses
checkpatch: use the correct indentation for which()
checkpatch: add fix_insert_line and fix_delete_line helpers
checkpatch: add ability to insert and delete lines to patch/file
checkpatch: add an index variable for fixed lines
checkpatch: warn on break after goto or return with same tab indentation
checkpatch: emit a warning on file add/move/delete
checkpatch: add test for commit id formatting style in commit log
checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
checkpatch: improve "no space after cast" test
checkpatch: allow multiple const * types
...
Pull trivial tree changes from Jiri Kosina:
"Summer edition of trivial tree updates"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: fix two typos in watchdog-api.txt
irq-gic: remove file name from heading comment
MAINTAINERS: Add miscdevice.h to file list for char/misc drivers.
scsi: mvsas: mv_sas.c: Fix for possible null pointer dereference
doc: replace "practise" with "practice" in Documentation
befs: remove check for CONFIG_BEFS_RW
scsi: doc: fix 'SCSI_NCR_SETUP_MASTER_PARITY'
drivers/usb/phy/phy.c: remove a leading space
mfd: fix comment
cpuidle: fix comment
doc: hpfall.c: fix missing null-terminate after strncpy call
usb: doc: hotplug.txt code typos
kbuild: fix comment in Makefile.modinst
SH: add proper prompt to SH_MAGIC_PANEL_R2_VERSION
ARM: msm: Remove MSM_SCM
crypto: Remove MPILIB_EXTRA
doc: CN: remove dead link, kerneltrap.org no longer works
media: update reference, kerneltrap.org no longer works
hexagon: update reference, kerneltrap.org no longer works
doc: LSM: update reference, kerneltrap.org no longer works
...
All other add functions for lists have the new item as first argument
and the position where it is added as second argument. This was changed
for no good reason in this function and makes using it unnecessary
confusing.
The name was changed to hlist_add_behind() to cause unconverted code to
generate a compile error instead of using the wrong parameter order.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Ken Helias <kenhelias@firemail.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits]
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After a VMA is created with the VM_SOFTDIRTY flag set, /proc/pid/pagemap
should report that the VMA's virtual pages are soft-dirty until
VM_SOFTDIRTY is cleared (i.e., by the next write of "4" to
/proc/pid/clear_refs). However, pagemap ignores the VM_SOFTDIRTY flag
for virtual addresses that fall in PTE holes (i.e., virtual addresses
that don't have a PMD, PUD, or PGD allocated yet).
To observe this bug, use mmap to create a VMA large enough such that
there's a good chance that the VMA will occupy an unused PMD, then test
the soft-dirty bit on its pages. In practice, I found that a VMA that
covered a PMD's worth of address space was big enough.
This patch adds the necessary VMA lookup to the PTE hole callback in
/proc/pid/pagemap's page walk and sets soft-dirty according to the VMAs'
VM_SOFTDIRTY flag.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Historically, we exported shared pages to userspace via sysinfo(2)
sharedram and /proc/meminfo's "MemShared" fields. With the advent of
tmpfs, from kernel v2.4 onward, that old way for accounting shared mem
was deemed inaccurate and we started to export a hard-coded 0 for
sysinfo.sharedram. Later on, during the 2.6 timeframe, "MemShared" got
re-introduced to /proc/meminfo re-branded as "Shmem", but we're still
reporting sysinfo.sharedmem as that old hard-coded zero, which makes the
"shared memory" report inconsistent across interfaces.
This patch leverages the addition of explicit accounting for pages used
by shmem/tmpfs -- "4b02108 mm: oom analysis: add shmem vmstat" -- in
order to make the users of sysinfo(2) and si_meminfo*() friends aware of
that vmstat entry and make them report it consistently across the
interfaces, as well to make sysinfo(2) returned data consistent with our
current API documentation states.
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Orabug: 19074140
When umount is issued during recovery on the new master that has not
finished remastering locks, it triggers BUG() in
dlm_send_mig_lockres_msg(). Here is the situation:
1) node A has a lock on resource X mastered by node B.
2) node B dies -> node A sets recovering flag for res X
3) Node C becomes the new master for resources owned by the
dead node and is remastering locks of the dead node but
has not finished the remastering process yet.
4) umount is issued on node C.
5) During processing of umount, ignoring unfished recovery,
node C attempts to migrate resource X to node A.
6) node A finds res X in DLM_LOCK_RES_RECOVERING state, considers
it a logic error and sends back -EFAULT.
7) node C asserts BUG() upon seeing EFAULT resp from node B.
Fix is to delay migrating res X till remastering is finished at which
point recovering flag will be cleared on both A and C.
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The unit of total_backoff is msecs not jiffies, so no need to do the
conversion. Otherwise, the join timeout is not 90 sec.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_search_extent_list may return -1, so we should check the return
value in ocfs2_split_and_insert, otherwise it may cause array index out of
bound.
And ocfs2_search_extent_list can only return value less than
el->l_next_free_rec, so check if it is equal or larger than
le16_to_cpu(el->l_next_free_rec) is meaningless.
Signed-off-by: Yingtai Xie <xieyingtai@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cached_page and lru_pvec were removed from ntfs_attr_extend_initialized
in commit 2ec93b0bf3 ("ntfs: clean up ntfs_attr_extend_initialized")
lru_pvec has been removed from __ntfs_grab_cache_pages in commit
4c99000ac4 ("ntfs: use add_to_page_cache_lru()")
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 8581679424 ("fanotify: Fix use after free for permission
events") introduced a double free issue for permission events which are
pending in group's notification queue while group is being destroyed.
These events are freed from fanotify_handle_event() but they are not
removed from groups notification queue and thus they get freed again
from fsnotify_flush_notify().
Fix the problem by removing permission events from notification queue
before freeing them if we skip processing access response. Also expand
comments in fanotify_release() to explain group shutdown in detail.
Fixes: 8581679424
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Douglas Leeder <douglas.leeder@sophos.com>
Tested-by: Douglas Leeder <douglas.leeder@sophos.com>
Reported-by: Heinrich Schuchard <xypron.glpk@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename fsnotify_add_notify_event() to fsnotify_add_event() since the
"notify" part is duplicit. Rename fsnotify_remove_notify_event() and
fsnotify_peek_notify_event() to fsnotify_remove_first_event() and
fsnotify_peek_first_event() respectively since "notify" part is duplicit
and they really look at the first event in the queue.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fscache_sysctls and fscache_sysctls_root are only used in main.c
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Steady transitioning of the BPF instructure to a generic spot so
all kernel subsystems can make use of it, from Alexei Starovoitov.
2) SFC driver supports busy polling, from Alexandre Rames.
3) Take advantage of hash table in UDP multicast delivery, from David
Held.
4) Lighten locking, in particular by getting rid of the LRU lists, in
inet frag handling. From Florian Westphal.
5) Add support for various RFC6458 control messages in SCTP, from
Geir Ola Vaagland.
6) Allow to filter bridge forwarding database dumps by device, from
Jamal Hadi Salim.
7) virtio-net also now supports busy polling, from Jason Wang.
8) Some low level optimization tweaks in pktgen from Jesper Dangaard
Brouer.
9) Add support for ipv6 address generation modes, so that userland
can have some input into the process. From Jiri Pirko.
10) Consolidate common TCP connection request code in ipv4 and ipv6,
from Octavian Purdila.
11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.
12) Generic resizable RCU hash table, with intial users in netlink and
nftables. From Thomas Graf.
13) Maintain a name assignment type so that userspace can see where a
network device name came from (enumerated by kernel, assigned
explicitly by userspace, etc.) From Tom Gundersen.
14) Automatic flow label generation on transmit in ipv6, from Tom
Herbert.
15) New packet timestamping facilities from Willem de Bruijn, meant to
assist in measuring latencies going into/out-of the packet
scheduler, latency from TCP data transmission to ACK, etc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
cxgb4 : Disable recursive mailbox commands when enabling vi
net: reduce USB network driver config options.
tg3: Modify tg3_tso_bug() to handle multiple TX rings
amd-xgbe: Perform phy connect/disconnect at dev open/stop
amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
net: sun4i-emac: fix memory leak on bad packet
sctp: fix possible seqlock seadlock in sctp_packet_transmit()
Revert "net: phy: Set the driver when registering an MDIO bus device"
cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
team: Simplify return path of team_newlink
bridge: Update outdated comment on promiscuous mode
net-timestamp: ACK timestamp for bytestreams
net-timestamp: TCP timestamping
net-timestamp: SCHED timestamp on entering packet scheduler
net-timestamp: add key to disambiguate concurrent datagrams
net-timestamp: move timestamp flags out of sk_flags
net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
cxgb4i : Move stray CPL definitions to cxgb4 driver
tcp: reduce spurious retransmits due to transient SACK reneging
qlcnic: Initialize dcbnl_ops before register_netdev
...
Pull security subsystem updates from James Morris:
"In this release:
- PKCS#7 parser for the key management subsystem from David Howells
- appoint Kees Cook as seccomp maintainer
- bugfixes and general maintenance across the subsystem"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (94 commits)
X.509: Need to export x509_request_asymmetric_key()
netlabel: shorter names for the NetLabel catmap funcs/structs
netlabel: fix the catmap walking functions
netlabel: fix the horribly broken catmap functions
netlabel: fix a problem when setting bits below the previously lowest bit
PKCS#7: X.509 certificate issuer and subject are mandatory fields in the ASN.1
tpm: simplify code by using %*phN specifier
tpm: Provide a generic means to override the chip returned timeouts
tpm: missing tpm_chip_put in tpm_get_random()
tpm: Properly clean sysfs entries in error path
tpm: Add missing tpm_do_selftest to ST33 I2C driver
PKCS#7: Use x509_request_asymmetric_key()
Revert "selinux: fix the default socket labeling in sock_graft()"
X.509: x509_request_asymmetric_keys() doesn't need string length arguments
PKCS#7: fix sparse non static symbol warning
KEYS: revert encrypted key change
ima: add support for measuring and appraising firmware
firmware_class: perform new LSM checks
security: introduce kernel_fw_from_file hook
PKCS#7: Missing inclusion of linux/err.h
...
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
Commits f1f007c308 (reiserfs: balance_leaf refactor, pull out
balance_leaf_insert_left) and cf22df182b (reiserfs: balance_leaf
refactor, pull out balance_leaf_paste_left) missed that the `body'
pointer was getting repositioned. Subsequent users of the pointer
would expect it to be repositioned, and as a result, parts of the
tree would get overwritten. The most common observed corruption
is indirect block pointers being overwritten.
Since the body value isn't actually used anymore in the called routines,
we can pass back the offset it should be shifted. We constify the body
and ih pointers in the balance_leaf as a mostly-free preventative measure.
Cc: <stable@vger.kernel.org> # 3.16
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Add some comments that describe what each of these objects is, and how
they related to one another.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Adds setinfo worker function for SMB2/SMB3 support of SET_ALLOCATION_INFORMATION
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Also destroy_clientid and bind_conn_to_session.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the old nfsd_for_n_state function and move nfsd_find_client
higher up into the file to get rid of forward declaration. Remove
the struct nfsd_fault_inject_op arguments from the operations as
they are no longer needed by any of them.
Finally, remove the old "standard" get and set routines, which
also eliminates the client_mutex from this code.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Also, fix up the printk output that is generated when the file is read.
It currently says that it's reporting the number of open files, but
it's actually reporting the number of openowners.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to collect the locks onto a list for later
destruction. If "func" is defined and "collect" is defined, then we'll
add the lock stateid to the list.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...which uses the client_lock for protection instead of client_mutex.
Also remove nfsd_forget_client as there are no more callers.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...that relies on the client_lock instead of client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a new "get" routine for forget_clients that relies on the
client_lock instead of the client_mutex.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we've added more granular locking in other places, it's time
to address the fault injection code. This code is currently quite
reliant on the client_mutex for protection. Start to change this by
adding a new set of fault injection op vectors.
For now they all use the legacy ones. In later patches we'll add new
routines that can deal with more granular locking.
Also, move some of the printk routines into the callers to make the
results of the operations more uniform.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The clid counter is a global counter currently. Move it to be a per-net
property so that it can be properly protected by the nn->client_lock
instead of relying on the client_mutex.
The verifier generator is also potentially racy if there are two
simultaneous callers. Generate the verifier when we generate the clid
value, so it's also created under the client_lock. With this, there's
no need to keep two counters as they'd always be in sync anyway, so
just use the clientid_counter for both.
As Trond points out, what would be best is to eventually move this
code to use IDR instead of the hash tables. That would also help ensure
uniqueness, but that's probably best done as a separate project.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that we'll have an in-progress call on some of the clients
while a rogue EXCHANGE_ID or DESTROY_CLIENTID call comes in. Be sure to
try and mark the client expired first, so that the refcount is
respected.
This will only be a problem once the client_mutex is removed.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=hf9n
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Bug fixes and clean ups for the 3.17 merge window"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix ext4_discard_allocated_blocks() if we can't allocate the pa struct
ext4: fix COLLAPSE RANGE test for bigalloc file systems
ext4: check inline directory before converting
ext4: fix incorrect locking in move_extent_per_page
ext4: use correct depth value
ext4: add i_data_sem sanity check
ext4: fix wrong size computation in ext4_mb_normalize_request()
ext4: make ext4_has_inline_data() as a inline function
ext4: remove readpage() check in ext4_mmap_file()
ext4: fix punch hole on files with indirect mapping
ext4: remove metadata reservation checks
ext4: rearrange initialization to fix EXT4FS_DEBUG
Pull f2fs updates from Jaegeuk Kim:
"This series includes patches to:
- add nobarrier mount option
- support tmpfile and rename2
- enhance the fdatasync behavior
- fix the error path
- fix the recovery routine
- refactor a part of the checkpoint procedure
- reduce some lock contentions"
* tag 'for-f2fs-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: use for_each_set_bit to simplify the code
f2fs: add f2fs_balance_fs for expand_inode_data
f2fs: invalidate xattr node page when evict inode
f2fs: avoid skipping recover_inline_xattr after recover_inline_data
f2fs: add tracepoint for f2fs_direct_IO
f2fs: reduce competition among node page writes
f2fs: fix coding style
f2fs: remove redundant lines in allocate_data_block
f2fs: add tracepoint for f2fs_issue_flush
f2fs: avoid retrying wrong recovery routine when error was occurred
f2fs: test before set/clear bits
f2fs: fix wrong condition for unlikely
f2fs: enable in-place-update for fdatasync
f2fs: skip unnecessary data writes during fsync
f2fs: add info of appended or updated data writes
f2fs: use radix_tree for ino management
f2fs: add infra for ino management
f2fs: punch the core function for inode management
f2fs: add nobarrier mount option
f2fs: fix to put root inode in error path of fill_super
...
Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that touched
many different subsystems so it was agreed it should go through this
tree to handle merge issues. There's also some firmware loading
updates, as well as tests added, and a few other tiny changes, the
changelog has the details.
All have been in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
=w8OJ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that
touched many different subsystems so it was agreed it should go
through this tree to handle merge issues. There's also some firmware
loading updates, as well as tests added, and a few other tiny changes,
the changelog has the details.
All have been in linux-next for a long time"
* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
ARM: imx: Remove references to platform_bus in mxc code
firmware loader: Fix _request_firmware_load() return val for fw load abort
platform: Remove most references to platform_bus device
test: add firmware_class loader test
doc: fix minor typos in firmware_class README
staging: android: Cleanup style issues
Documentation: devres: Sort managed interfaces
Documentation: devres: Add devm_kmalloc() et al
fs: debugfs: remove trailing whitespace
kernfs: kernel-doc warning fix
debugfs: Fix corrupted loop in debugfs_remove_recursive
stable_kernel_rules: Add pointer to netdev-FAQ for network patches
driver core: platform: add device binding path 'driver_override'
driver core/platform: remove unused implicit padding in platform_object
firmware loader: inform direct failure when udev loader is disabled
firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
firmware: read firmware size using i_size_read()
firmware loader: allow disabling of udev as firmware loader
reservation: add suppport for read-only access using rcu
reservation: update api and add some helpers
...
Conflicts:
drivers/base/platform.c
Pull scheduler updates from Ingo Molnar:
- Move the nohz kick code out of the scheduler tick to a dedicated IPI,
from Frederic Weisbecker.
This necessiated quite some background infrastructure rework,
including:
* Clean up some irq-work internals
* Implement remote irq-work
* Implement nohz kick on top of remote irq-work
* Move full dynticks timer enqueue notification to new kick
* Move multi-task notification to new kick
* Remove unecessary barriers on multi-task notification
- Remove proliferation of wait_on_bit() action functions and allow
wait_on_bit_action() functions to support a timeout. (Neil Brown)
- Another round of sched/numa improvements, cleanups and fixes. (Rik
van Riel)
- Implement fast idling of CPUs when the system is partially loaded,
for better scalability. (Tim Chen)
- Restructure and fix the CPU hotplug handling code that may leave
cfs_rq and rt_rq's throttled when tasks are migrated away from a dead
cpu. (Kirill Tkhai)
- Robustify the sched topology setup code. (Peterz Zijlstra)
- Improve sched_feat() handling wrt. static_keys (Jason Baron)
- Misc fixes.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
sched/fair: Fix 'make xmldocs' warning caused by missing description
sched: Use macro for magic number of -1 for setparam
sched: Robustify topology setup
sched: Fix sched_setparam() policy == -1 logic
sched: Allow wait_on_bit_action() functions to support a timeout
sched: Remove proliferation of wait_on_bit() action functions
sched/numa: Revert "Use effective_load() to balance NUMA loads"
sched: Fix static_key race with sched_feat()
sched: Remove extra static_key*() function indirection
sched/rt: Fix replenish_dl_entity() comments to match the current upstream code
sched: Transform resched_task() into resched_curr()
sched/deadline: Kill task_struct->pi_top_task
sched: Rework check_for_tasks()
sched/rt: Enqueue just unthrottled rt_rq back on the stack in __disable_runtime()
sched/fair: Disable runtime_enabled on dying rq
sched/numa: Change scan period code to match intent
sched/numa: Rework best node setting in task_numa_migrate()
sched/numa: Examine a task move when examining a task swap
sched/numa: Simplify task_numa_compare()
sched/numa: Use effective_load() to balance NUMA loads
...
Commit c8e47028 made it possible to change resvport/noresvport and
sharecache/nosharecache via a remount operation, neither of which should be
allowed.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: c8e47028 (nfs: Apply NFS_MOUNT_CMP_FLAGMASK to nfs_compare_remount_data)
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch uses for_each_set_bit to simplify some codes in f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_balance_fs in expand_inode_data to avoid allocation failure
with segment.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When inode is evicted, all the page cache belong to this inode should be
released including the xattr node page. But previously we didn't do this, this
patch fixed this issue.
v2:
o reposition invalidate_mapping_pages() to the right place suggested by
Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull percpu updates from Tejun Heo:
- Major reorganization of percpu header files which I think makes
things a lot more readable and logical than before.
- percpu-refcount is updated so that it requires explicit destruction
and can be reinitialized if necessary. This was pulled into the
block tree to replace the custom percpu refcnting implemented in
blk-mq.
- In the process, percpu and percpu-refcount got cleaned up a bit
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (21 commits)
percpu-refcount: implement percpu_ref_reinit() and percpu_ref_is_zero()
percpu-refcount: require percpu_ref to be exited explicitly
percpu-refcount: use unsigned long for pcpu_count pointer
percpu-refcount: add helpers for ->percpu_count accesses
percpu-refcount: one bit is enough for REF_STATUS
percpu-refcount, aio: use percpu_ref_cancel_init() in ioctx_alloc()
workqueue: stronger test in process_one_work()
workqueue: clear POOL_DISASSOCIATED in rebind_workers()
percpu: Use ALIGN macro instead of hand coding alignment calculation
percpu: invoke __verify_pcpu_ptr() from the generic part of accessors and operations
percpu: preffity percpu header files
percpu: use raw_cpu_*() to define __this_cpu_*()
percpu: reorder macros in percpu header files
percpu: move {raw|this}_cpu_*() definitions to include/linux/percpu-defs.h
percpu: move generic {raw|this}_cpu_*_N() definitions to include/asm-generic/percpu.h
percpu: only allow sized arch overrides for {raw|this}_cpu_*() ops
percpu: reorganize include/linux/percpu-defs.h
percpu: move accessors from include/linux/percpu.h to percpu-defs.h
percpu: include/asm-generic/percpu.h should contain only arch-overridable parts
percpu: introduce arch_raw_cpu_ptr()
...
In oddball cases where the thread has a different mount namespace than
the thread group leader or more likely in cases where the thread
remains and the thread group leader has exited this ensures that
/proc/mounts continues to work.
This should not cause any problems but if it does this patch can just
be reverted.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In oddball cases where the thread has a different network namespace
than the primary thread group leader or more likely in cases where
the thread remains and the thread group leader has exited this
ensures that /proc/net continues to work.
This should not cause any problems but if it does this patch can just
be reverted.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
/proc/thread-self is derived from /proc/self. /proc/thread-self
points to the directory in proc containing information about the
current thread.
This funtionality has been missing for a long time, and is tricky to
implement in userspace as gettid() is not exported by glibc. More
importantly this allows fixing defects in /proc/mounts and /proc/net
where in a threaded application today they wind up being empty files
when only the initial pthread has exited, causing problems for other
threads.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJT34bvAAoJEAAOaEEZVoIVAPIQAINMD2fqeF3g9ZHxyzsKWoUp
f14ZKeF/6nbG4Bn+iIihzxz/Bs9qS+03oVeI4oAg1c9crT+qZ6+nLM4C1n5gfck0
Z0DvF1ITFcr+Nv0D/GSIiI4NY8ZJLP5gZWCPYaO4xamwVs2Bh4/B4uxi7ETIkfXh
uL6dN739D2fBDNZBbeRh4VJTGXbT6ipzkTIBFXkMfmqGtUxzeTfepN+IdhE5gVnx
xXc8ZZOVNmWI7g/YAYKSMlLbufHHgX47U2sNTljtHII4GXf98DmiYulcJvhfQ1JP
7xSmbIrvn9Gm2iGobzbfED/OjXA0rsdw1vSzTO/uHUYPRriMOwuDRGE+S3oP0dRD
ZdxQa8iOZjWEsWbDTRekBBAIXWcTUN8g8EbPj74EN0GWi3HYFj/ORkowj5Ym6zWh
Sv4w9SafNMOKy9tt4RVh4iwendU/pNLrRgvR407aM+UWkhwCpinlO6vSLHppUwlC
dgxFZtkdeBf5tMkm8Tja+XAV2SjU8DwP4nFU1kHu25L0W7m7hmmIeu6Crq5qlL3J
0NCPTO1LeGNP1WiOQf99nXoJVeL3//CfD+H4LjIMcGCc4P7gJc346rH91Zd6rXY/
kGomnkBMw+5WLvfOJ1NhuaEy3g8Wfk84QzlsmWgTEzl5qT+SEjPLcDHWqWJ2GTvB
gFUPWHenVMcrFN/n0CWg
=hvV8
-----END PGP SIGNATURE-----
Merge tag 'locks-v3.17-1' of git://git.samba.org/jlayton/linux
Pull file locking related changes from Jeff Layton:
"Just a couple of changes from Christoph to start us down the road
toward getting rid of the fl_owner_t typedef"
* tag 'locks-v3.17-1' of git://git.samba.org/jlayton/linux:
locks: purge fl_owner_t from fs/locks.c
locks: typedef fl_owner_t to void *
The usage of pid_ns->child_reaper->nsproxy->net_ns in
nfs_server_list_open and nfs_client_list_open is not safe.
/proc for a pid namespace can remain mounted after the all of the
process in that pid namespace have exited. There are also times
before the initial process in a pid namespace has started or after the
initial process in a pid namespace has exited where
pid_ns->child_reaper can be NULL or stale. Making the idiom
pid_ns->child_reaper->nsproxy a double whammy of problems.
Luckily all that needs to happen is to move /proc/fs/nfsfs/servers and
/proc/fs/nfsfs/volumes under /proc/net to /proc/net/nfsfs/servers and
/proc/net/nfsfs/volumes and add a symlink from the original location,
and to use seq_open_net as it has been designed.
Cc: stable@vger.kernel.org
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
1/ rcu_dereference isn't correct: that field isn't
RCU protected. It could potentially change at any time
so ACCESS_ONCE might be justified.
changes to ->d_parent are protected by ->d_seq. However
that isn't always checked after ->d_revalidate is called,
so it is safest to keep the double-check that ->d_parent
hasn't changed at the end of these functions.
2/ in nfs4_lookup_revalidate, "->d_parent" was forgotten.
So 'parent' was not the parent of 'dentry'.
This fails safe is the context is that dentry->d_inode is
NULL, and the result of parent->d_inode being NULL is
that ECHILD is returned, which is always safe.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We need to treat both inodes identically from a page cache point of
view when prepareing them for extent swapping. We don't do this
right now - we assume that one of the inodes empty, because that's
what xfs_fsr currently does. Remove this assumption from the code.
While factoring out the flushing and related checks, move the
transactions reservation to immeidately after the flushes so that we
don't need to pick up and then drop the ilock to do the transaction
reservation. There are no issues with aborting the transaction it if
the checks fail before we join the inodes to the transaction and
dirty them, so this is a safe change to make.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_swap_extents() holds the ilock over a call to
filemap_write_and_wait(), which can then try to write data and take
the ilock. That causes a self-deadlock.
Fix the deadlock and clean up the code by separating the locking
appropriately. Add a lockflags variable to track what locks we are
holding as we gain and drop them and cleanup the error handling to
always use "out_unlock" with the lockflags variable.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the IO flag definitions to xfs_inode.h and kill the header file
as it is now empty.
Removing the xfs_vnode.h file showed up an implicit header include
path:
xfs_linux.h -> xfs_vnode.h -> xfs_fs.h
And so every xfs header file has been inplicitly been including
xfs_fs.h where it is needed or not. Hence the removal of xfs_vnode.h
causes all sorts of build issues because BBTOB() and friends are no
longer automatically included in the build. This also gets fixed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only one user, no longer needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only has 2 users, has outlived it's usefulness.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only one user of the macro and the dirty mapping check is redundant
so just get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
dquot recovery should add verifiers to the dquot buffers that it
recovers changes into. Unfortunately, it doesn't attached the
verifiers to the buffers in a consistent manner. For example,
xlog_recover_dquot_pass2() reads dquot buffers without a verifier
and then writes it without ever having attached a verifier to the
buffer.
Further, dquot buffer recovery may write a dquot buffer that has not
been modified, or indeed, shoul dbe written because quotas are not
enabled and hence changes to the buffer were not replayed. In this
case, we again write buffers without verifiers attached because that
doesn't happen until after the buffer changes have been replayed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When running xfs/305, I noticed that quotacheck was flushing dquot
buffers that did not have the xfs_dquot_buf_ops verifiers attached:
XFS (vdb): _xfs_buf_ioapply: no ops on block 0x1dc8/0x1dc8
ffff880052489000: 44 51 01 04 00 00 65 b8 00 00 00 00 00 00 00 00 DQ....e.........
ffff880052489010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ffff880052489020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
ffff880052489030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
CPU: 1 PID: 2376 Comm: mount Not tainted 3.16.0-rc2-dgc+ #306
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff88006fe38000 ffff88004a0ffae8 ffffffff81cf1cca 0000000000000001
ffff88004a0ffb88 ffffffff814d50ca 000010004a0ffc70 0000000000000000
ffff88006be56dc4 0000000000000021 0000000000001dc8 ffff88007c773d80
Call Trace:
[<ffffffff81cf1cca>] dump_stack+0x45/0x56
[<ffffffff814d50ca>] _xfs_buf_ioapply+0x3ca/0x3d0
[<ffffffff810db520>] ? wake_up_state+0x20/0x20
[<ffffffff814d51f5>] ? xfs_bdstrat_cb+0x55/0xb0
[<ffffffff814d513b>] xfs_buf_iorequest+0x6b/0xd0
[<ffffffff814d51f5>] xfs_bdstrat_cb+0x55/0xb0
[<ffffffff814d53ab>] __xfs_buf_delwri_submit+0x15b/0x220
[<ffffffff814d6040>] ? xfs_buf_delwri_submit+0x30/0x90
[<ffffffff814d6040>] xfs_buf_delwri_submit+0x30/0x90
[<ffffffff8150f89d>] xfs_qm_quotacheck+0x17d/0x3c0
[<ffffffff81510591>] xfs_qm_mount_quotas+0x151/0x1e0
[<ffffffff814ed01c>] xfs_mountfs+0x56c/0x7d0
[<ffffffff814f0f12>] xfs_fs_fill_super+0x2c2/0x340
[<ffffffff811c9fe4>] mount_bdev+0x194/0x1d0
[<ffffffff814f0c50>] ? xfs_finish_flags+0x170/0x170
[<ffffffff814ef0f5>] xfs_fs_mount+0x15/0x20
[<ffffffff811ca8c9>] mount_fs+0x39/0x1b0
[<ffffffff811e4d67>] vfs_kern_mount+0x67/0x120
[<ffffffff811e757e>] do_mount+0x23e/0xad0
[<ffffffff8117abde>] ? __get_free_pages+0xe/0x50
[<ffffffff811e71e6>] ? copy_mount_options+0x36/0x150
[<ffffffff811e8103>] SyS_mount+0x83/0xc0
[<ffffffff81cfd40b>] tracesys+0xdd/0xe2
This was caused by dquot buffer readahead not attaching a verifier
structure to the buffer when readahead was issued, resulting in the
followup read of the buffer finding a valid buffer and so not
attaching new verifiers to the buffer as part of the read.
Also, when a verifier failure occurs, we then read the buffer
without verifiers. Attach the verifiers manually after this read so
that if the buffer is then written it will be verified that the
corruption has been repaired.
Further, when flushing a dquot we don't ask for a verifier when
reading in the dquot buffer the dquot belongs to. Most of the time
this isn't an issue because the buffer is still cached, but when it
is not cached it will result in writing the dquot buffer without
having the verfier attached.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Crash testing of CRC enabled filesystems has resulted in a number of
reports of bad CRCs being detected after the filesystem was mounted.
Errors such as the following were being seen:
XFS (sdb3): Mounting V5 Filesystem
XFS (sdb3): Starting recovery (logdev: internal)
XFS (sdb3): Metadata CRC error detected at xfs_agf_read_verify+0x5a/0x100 [xfs], block 0x1
XFS (sdb3): Unmount and run xfs_repair
XFS (sdb3): First 64 bytes of corrupted metadata buffer:
ffff880136ffd600: 58 41 47 46 00 00 00 01 00 00 00 00 00 0f aa 40 XAGF...........@
ffff880136ffd610: 00 02 6d 53 00 02 77 f8 00 00 00 00 00 00 00 01 ..mS..w.........
ffff880136ffd620: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 03 ................
ffff880136ffd630: 00 00 00 04 00 08 81 d0 00 08 81 a7 00 00 00 00 ................
XFS (sdb3): metadata I/O error: block 0x1 ("xfs_trans_read_buf_map") error 74 numblks 1
The errors were typically being seen in AGF, AGI and their related
btree block buffers some time after log recovery had run. Often it
wasn't until later subsequent mounts that the problem was
discovered. The common symptom was a buffer with the correct
contents, but a CRC and an LSN that matched an older version of the
contents.
Some debug added to _xfs_buf_ioapply() indicated that buffers were
being written without verifiers attached to them from log recovery,
and Jan Kara isolated the cause to log recovery readahead an dit's
interactions with buffers that had a more recent LSN on disk than
the transaction being recovered. In this case, the buffer did not
get a verifier attached, and os when the second phase of log
recovery ran and recovered EFIs and unlinked inodes, the buffers
were modified and written without the verifier running. Hence they
had up to date contents, but stale LSNs and CRCs.
Fix it by attaching verifiers to buffers we skip due to future LSN
values so they don't escape into the buffer cache without the
correct verifier attached.
This patch is based on analysis and a patch from Jan Kara.
cc: <stable@vger.kernel.org>
Reported-by: Jan Kara <jack@suse.cz>
Reported-by: Fanael Linithien <fanael4@gmail.com>
Reported-by: Grozdan <neutrino8@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We recently had a bug where buffers were slipping through log
recovery without any verifier attached to them. This was resulting
in on-disk CRC mismatches for valid data. Add some warning code to
catch this occurrence so that we catch such bugs during development
rather than not being aware they exist.
Note that we cannot do this verification unconditionally as non-CRC
filesystems don't always attach verifiers to the buffers being
written. e.g. during log recovery we cannot identify all the
different types of buffers correctly on non-CRC filesystems, so we
can't attach the correct verifiers in all cases and so we don't
attach any. Hence we don't want on non-CRC filesystems to avoid
spamming the logs with false indications.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The commit
83e782e xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
added a new function xfs_sb_quota_from_disk() which swaps
on-disk XFS_OQUOTA_* flags for in-core XFS_GQUOTA_* and XFS_PQUOTA_*
flags after the superblock is read.
However, if log recovery is required, the superblock is read again,
and the modified in-core flags are re-read from disk, so we have
XFS_OQUOTA_* flags in memory again. This causes the
XFS_QM_NEED_QUOTACHECK() test to be true, because the XFS_OQUOTA_CHKD
is still set, and not XFS_GQUOTA_CHKD or XFS_PQUOTA_CHKD.
Change xfs_sb_from_disk to call xfs_sb_quota_from disk and always
convert the disk flags to in-memory flags.
Add a lower-level function which can be called with "false" to
not convert the flags, so that the sb verifier can verify
exactly what was on disk, per Brian Foster's suggestion.
Reported-by: Cyril B. <cbay@excellency.fr>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
The offset and length parameters are converted from bytes to basic
blocks by xfs_vn_fiemap(). The BTOBB() converter rounds the value up to
the nearest basic block. This leads to unexpected behavior when
unaligned offsets are provided to FIEMAP.
Fix the conversions of byte values to block values to cover the provided
offsets. Round down the start offset to the nearest basic block.
Calculate the end offset based on the provided values, round up and
calculate length based on the start block offset.
Reported-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce xfs_bulkstat_ag_ichunk() to process inodes in chunk with a
pointer to a formatter function that will iget the inode and fill in
the appropriate structure.
Refactor xfs_bulkstat() with it.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The access cache is used during RCU-walk path lookups, so it is best
to avoid locking if possible as taking a lock kills concurrency.
The rbtree is not rcu-safe and cannot easily be made so.
Instead we simply check the last (i.e. most recent) entry on the LRU
list. If this doesn't match, then we return -ECHILD and retry in
lock/refcount mode.
This requires freeing the nfs_access_entry struct with rcu, and
requires using rcu access primatives when adding entries to the lru, and
when examining the last entry.
Calling put_rpccred before kfree_rcu looks a bit odd, but as
put_rpccred already provides rcu protection, we know that the cred will
not actually be freed until the next grace period, so any concurrent
access will be safe.
This patch provides about 5% performance improvement on a stat-heavy
synthetic work load with 4 threads on a 2-core CPU.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It fails with -ECHILD rather than make an RPC call.
This allows nfs_lookup_revalidate to call it in RCU-walk mode.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This requires nfs_check_verifier to take an rcu_walk flag, and requires
an rcu version of nfs_revalidate_inode which returns -ECHILD rather
than making an RPC call.
With this, nfs_lookup_revalidate can call nfs_neg_need_reval in
RCU-walk mode.
We can also move the LOOKUP_RCU check past the nfs_check_verifier()
call in nfs_lookup_revalidate.
If RCU_WALK prevents nfs_check_verifier or nfs_neg_need_reval from
doing a full check, they return a status indicating that a revalidation
is required. As this revalidation will not be possible in RCU_WALK
mode, -ECHILD will ultimately be returned, which is the desired result.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs_permission makes two calls which are not always safe in RCU_WALK,
rpc_lookup_cred and nfs_do_access.
The second can easily be made rcu-safe by aborting with -ECHILD before
making the RPC call.
The former can be made rcu-safe by calling rpc_lookup_cred_nonblock()
instead.
As this will almost always succeed, we use it even when RCU_WALK
isn't being used as it still saves some spinlocks in a common case.
We only fall back to rpc_lookup_cred() if rpc_lookup_cred_nonblock()
fails and MAY_NOT_BLOCK isn't set.
This optimisation (always trying rpc_lookup_cred_nonblock()) is
particularly important when a security module is active.
In that case inode_permission() may return -ECHILD from
security_inode_permission() even though ->permission() succeeded in
RCU_WALK mode.
This leads to may_lookup() retrying inode_permission after performing
unlazy_walk(). The spinlock that rpc_lookup_cred() takes is often
more expensive than anything security_inode_permission() does, so that
spinlock becomes the main bottleneck.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs_lookup_revalidate, nfs4_lookup_revalidate, and nfs_permission
all need to understand and handle RCU-walk for NFS to gain the
benefits of RCU-walk for cached information.
Currently these functions all immediately return -ECHILD
if the relevant flag (LOOKUP_RCU or MAY_NOT_BLOCK) is set.
This patch pushes those tests later in the code so that we only abort
immediately before we enter rcu-unsafe code. As subsequent patches
make that rcu-unsafe code rcu-safe, several of these new tests will
disappear.
With this patch there are several paths through the code which will no
longer return -ECHILD during an RCU-walk. However these are mostly
error paths or other uninteresting cases.
A noteworthy change in nfs_lookup_revalidate is that we don't take
(or put) the reference to ->d_parent when LOOKUP_RCU is set.
Rather we rcu_dereference ->d_parent, and check that ->d_inode
is not NULL. We also check that ->d_parent hasn't changed after
all the tests.
In nfs4_lookup_revalidate we simply avoid testing LOOKUP_RCU on the
path that only calls nfs_lookup_revalidate() as that function
already performs the required test.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs4_lookup_revalidate only uses 'parent' to get 'dir', and only
uses 'dir' if 'inode == NULL'.
So we don't need to find out what 'parent' or 'dir' is until we
know that 'inode' is NULL.
By moving 'dget_parent' inside the 'if', we can reduce the number of
call sites for 'dput(parent)'.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There is a couple of places in client code where returned value
of try_module_get() is ignored. As a result there is a small chance
to premature unload module because of unbalanced refcounting.
The patch adds error handling in that places.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This is useful when lsegs need to be released while holding locks.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
nfs_page_find_head_request_locked looks through the regular nfs commit lists
when the page is swapped out, but doesn't look through the pnfs commit lists.
I'm not sure if anyone has hit any issues caused by this.
Suggested-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix the comment in nfs_page.h for PG_INODE_REF to reflect that it's no longer
set only on head requests. Also add a WARN_ON_ONCE in nfs_inode_remove_request
as PG_INODE_REF should always be set.
Suggested-by: Peng Tao <tao.peng@primarydata.com>
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Return errors from wait_on_bit_lock from nfs_page_group_lock.
Add a bool argument @wait to nfs_page_group_lock. If true, loop over
wait_on_bit_lock until it returns cleanly. If false, return the error
from wait_on_bit_lock.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If you have an NFSv4 mounted directory which does not container 'foo'
and:
ls -l foo
ssh $server touch foo
cat foo
then the 'cat' will fail (usually, depending a bit on the various
cache ages). This is correct as negative looks are cached by default.
However with the same initial conditions:
cat foo
ssh $server touch foo
cat foo
will usually succeed. This is because an "open" does not add a
negative dentry to the dcache, while a "lookup" does.
This can have negative performance effects. When "gcc" searches for
an include file, it will try to "open" the file in every director in
the search path. Without caching of negative "open" results, this
generates much more traffic to the server than it should (or than
NFSv3 does).
The root of the problem is that _nfs4_open_and_get_state() will call
d_add_unique() on a positive result, but not on a negative result.
Compare with nfs_lookup() which calls d_materialise_unique on both
a positive result and on ENOENT.
This patch adds a call d_add() in the ENOENT case for
_nfs4_open_and_get_state() and also calls nfs_set_verifier().
With it, many fewer "open" requests for known-non-existent files are
sent to the server.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
There was a check for result being not NULL. But get_acl() may return
NULL, or ERR_PTR, or actual pointer.
The purpose of the function where current change is done is to "list
ACLs only when they are available", so any error condition of get_acl()
mustn't be elevated, and returning 0 there is still valid.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81111
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 74adf83f5d (nfs: only show Posix ACLs in listxattr if actually...)
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits)
xprtrdma: Handle additional connection events
xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
xprtrdma: Make rpcrdma_ep_disconnect() return void
xprtrdma: Schedule reply tasklet once per upcall
xprtrdma: Allocate each struct rpcrdma_mw separately
xprtrdma: Rename frmr_wr
xprtrdma: Disable completions for LOCAL_INV Work Requests
xprtrdma: Disable completions for FAST_REG_MR Work Requests
xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
xprtrdma: Properly handle exhaustion of the rb_mws list
xprtrdma: Chain together all MWs in same buffer pool
xprtrdma: Back off rkey when FAST_REG_MR fails
xprtrdma: Unclutter struct rpcrdma_mr_seg
xprtrdma: Don't invalidate FRMRs if registration fails
xprtrdma: On disconnect, don't ignore pending CQEs
xprtrdma: Update rkeys after transport reconnect
xprtrdma: Limit data payload size for ALLPHYSICAL
xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
...
This may be used to limit the number of cached credentials building up
inside the access cache.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Joe Perches and Hans Wennborg noticed that various places in the
kernel were printing decimal numbers with 0x prefix.
printk("0x%d") or equivalent
This fixes the instances of this in the cifs driver.
CC: Hans Wennborg <hans@hanshq.net>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When we recover data of inode in roll-forward procedure, and the inode has both
inline data and inline xattr. We may skip recovering inline xattr if we recover
inline data form node page first.
This patch will fix the problem that we lost inline xattr data in above
scenario.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The existing mapping causes unlink() call to return error after delete
operation. Changing the mapping to -EACCES makes the client process
the call like CIFS protocol does - reset dos attributes with ATTR_READONLY
flag masked off and retry the operation.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
by marking pages with a data from a partially received response up-to-date.
This is suitable for non-signed connections.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
by filling the output buffer with a data got from a partially received
response and requesting the remaining data from the server. This is
suitable for non-signed connections.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If there was a short read in the middle of the rdata list,
we can end up with a corrupt output buffer.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
that let us know how many bytes we have already got before reconnect.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
and don't mix it with the number of bytes that was requested.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If we negotiate SMB 2.1 and higher version of the protocol and
a server supports large read buffer size, we need to consume 1
credit per 65536 bytes. So, we need to know how many credits
we have and obtain the required number of them before constructing
a readdata structure in readpages and user read.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read requests (rsize)
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in cifs_read. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read (rsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in user read. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server changes maximum buffer size for read (rsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in readpages. Fix this by checking rsize all the
time before repeating requests.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If we negotiate SMB 2.1 and higher version of the protocol and
a server supports large write buffer size, we need to consume 1
credit per 65536 bytes. So, we need to know how many credits
we have and obtain the required number of them before constructing
a writedata structure in writepages and iovec write.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server change maximum buffer size for write (wsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in iovec write. Fix this by checking wsize all the
time before repeating request in iovec write.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If wsize changes on reconnect we need to use new writedata structure
that for retrying.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If a server change maximum buffer size for write (wsize) requests
on reconnect we can fail on repeating with a big size buffer on
-EAGAIN error in writepages. Fix this by checking wsize all the
time before repeating request in writepages.
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
The recent session setup patch set
(cifs-Separate-rawntlmssp-auth-from-CIFS_SessSetup.patch)
had introduced a trivial sparse build warning.
Signed-off-by: Steve French <smfrench@gmail.com>
Cc: Sachin Prabhu <sprabhu@redhat.com>
If we get into read_into_pages() from cifs_readv_receive() and then
loose a network, we issue cifs_reconnect that moves all mids to
a private list and issue their callbacks. The callback of the async
read request sets a mid to retry, frees it and wakes up a process
that waits on the rdata completion.
After the connection is established we return from read_into_pages()
with a short read, use the mid that was freed before and try to read
the remaining data from the a newly created socket. Both actions are
not what we want to do. In reconnect cases (-EAGAIN) we should not
mask off the error with a short read but should return the error
code instead.
Acked-by: Jeff Layton <jlayton@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
If it fails, it means that the client is in use and so destroying it
would be bad. Currently, the client_mutex prevents this from happening
but once we remove it, we won't be able to do this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All the callers except for the fault injection code call it directly
afterward, and in the fault injection case it won't hurt to do so
anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, it's protected by the client_mutex. Move it so that the list
and the fields in the openowner are protected by the client_lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the client lookup is done safely under the client_lock, so
we're not relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In particular, we want to ensure that the move_to_confirmed() is
protected by the nn->client_lock spin lock, so that we can use that when
looking up the clientid etc. instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For efficiency reasons, and because we want to use spin locks instead
of relying on the client_mutex.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The struct nfs_client is supposed to be invisible and unreferenced
before it gets here.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we leave the client on the confirmed/unconfirmed tables, and leave
the sessions visible on the sessionid_hashtbl, then someone might
find them before we've had a chance to destroy them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When we remove the client_mutex protection, we will need to ensure
that it can't be found by other threads while we're destroying it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A memory allocation failure could cause nfsd_startup_generic to fail, in
which case nfsd_users wouldn't be incorrectly left elevated.
After nfsd restarts nfsd_startup_generic will then succeed without doing
anything--the first consequence is likely nfs4_start_net finding a bad
laundry_wq and crashing.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 4539f14981 "nfsd: replace boolean nfsd_up flag by users counter"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix the broken check for calling sys_fallocate() on an active swapfile,
introduced by commit 0790b31b69 ("fs: disallow all fallocate
operation on active swapfile").
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>