sym_arr is of type struct symbol **.
So in malloc we need sizeof(struct symbol *).
The problem was indicated by coccinelle.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that gperf-3.1 changed types in the generated code in ways
that aren't even trivially detectable without having to generate a test-file.
It's just not worth using tools and libraries from clowns that don't
understand or care about compatibility. So get rid of gperf.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C+WJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: create deterministic initramfs directory listings
scripts/mkcompile_h: Remove trailing spaces from compiler version
scripts: Switch to more portable Perl shebang
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is a check and a nice user-friendly message when the curses
library is not present on the system and the user wants to do "make
menuconfig". It doesn't get issued, though. Instead, we fail the build
when mconf.c doesn't find the curses.h header:
HOSTCC scripts/kconfig/mconf.o
In file included from scripts/kconfig/mconf.c:23:0:
scripts/kconfig/lxdialog/dialog.h:38:20: fatal error: curses.h: No such file or directory
#include CURSES_LOC
^
compilation terminated.
Make that check a prerequisite to mconf so that the user sees the error
message instead:
$ make menuconfig
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
scripts/kconfig/Makefile:203: recipe for target 'scripts/kconfig/dochecklxdialog' failed
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
Makefile:548: recipe for target 'menuconfig' failed
make: *** [menuconfig] Error 2
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building the kernel with clang, the compiler complains about the
presence of a condition inside two pairs of parentheses:
scripts/kconfig/gconf.c:917:19: error: equality comparison with
extraneous parentheses [-Werror,-Wparentheses-equality]
} else if ((col == COL_OPTION)) {
~~~~^~~~~~~~~~~~~
scripts/kconfig/gconf.c:917:19: note: remove extraneous parentheses
around the comparison to silence this warning
} else if ((col == COL_OPTION)) {
~ ^ ~
scripts/kconfig/gconf.c:917:19: note: use '=' to turn this equality
comparison into an assignment
} else if ((col == COL_OPTION)) {
^~
=
Silence this warning by removing a level of parentheses.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull kconfig updates from Michal Marek:
- 'make xconfig' gui fixes
- 'make nconfig' fix for options with long prompts
- fix 'make nconfig' warning when pkg-config forces -D_GNU_SOURCE
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
xconfig: fix missing suboption and help panels on first run
xconfig: fix 'Show Debug' functionality
kconfig/nconf: Fix hang when editing symbol with a long prompt
Scripts: kconfig: nconf: fix _GNU_SOURCE redefined warning
Pull timer updates from Thomas Gleixner:
"The time/timekeeping/timer folks deliver with this update:
- Fix a reintroduced signed/unsigned issue and cleanup the whole
signed/unsigned mess in the timekeeping core so this wont happen
accidentaly again.
- Add a new trace clock based on boot time
- Prevent injection of random sleep times when PM tracing abuses the
RTC for storage
- Make posix timers configurable for real tiny systems
- Add tracepoints for the alarm timer subsystem so timer based
suspend wakeups can be instrumented
- The usual pile of fixes and updates to core and drivers"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
timekeeping: Use mul_u64_u32_shr() instead of open coding it
timekeeping: Get rid of pointless typecasts
timekeeping: Make the conversion call chain consistently unsigned
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
alarmtimer: Add tracepoints for alarm timers
trace: Update documentation for mono, mono_raw and boot clock
trace: Add an option for boot clock as trace clock
timekeeping: Add a fast and NMI safe boot clock
timekeeping/clocksource_cyc2ns: Document intended range limitation
timekeeping: Ignore the bogus sleep time if pm_trace is enabled
selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
arm64: dts: rockchip: Arch counter doesn't tick in system suspend
clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
posix-timers: Make them configurable
posix_cpu_timers: Move the add_device_randomness() call to a proper place
timer: Move sys_alarm from timer.c to itimer.c
ptp_clock: Allow for it to be optional
Kconfig: Regenerate *.c_shipped files after previous changes
...
qconfig initial slider sizes fix.
On first `make xconfig`, suboption and help panels were hidden.
Now we properly detect the first run, and show those panels.
Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
xconfig - Fix missing 'Show Debug' functionality.
xconfig Help mentions 'Show Debug Info' but it was missing from any
menu.
* Add 'Show debug' menu to the main menu.
* Properly load showDebug settings.
Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Currently it is impossible to edit the value of a config symbol with a
prompt longer than (terminal width - 2) characters. dialog_inputbox()
calculates a negative x-offset for the input window and newwin() fails
as this is invalid. It also doesn't check for this failure, so it
busy-loops calling wgetch(NULL) which immediately returns -1.
The additions in the offset calculations also don't match the intended
size of the window.
Limit the window size and calculate the offset similarly to
show_scroll_win().
Cc: stable <stable@vger.kernel.org>
Fixes: 692d97c380 ("kconfig: new configuration interface (nconfig)")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created. Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix below warning when make nconfig is run initially
or after make clean.
HOSTCC scripts/kconfig/nconf.o
scripts/kconfig/nconf.c:8:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
^
<command-line>:0:0: note: this is the location of the previous definition
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The "imply" keyword is a weak version of "select" where the target
config symbol can still be turned off, avoiding those pitfalls that come
with the "select" keyword.
This is useful e.g. with multiple drivers that want to indicate their
ability to hook into a secondary subsystem while allowing the user to
configure that subsystem out without also having to unset these drivers.
Currently, the same effect can almost be achieved with:
config DRIVER_A
tristate
config DRIVER_B
tristate
config DRIVER_C
tristate
config DRIVER_D
tristate
[...]
config SUBSYSTEM_X
tristate
default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...]
This is unwieldy to maintain especially with a large number of drivers.
Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X
to y or n, excluding m, when some drivers are built-in. The "select"
keyword allows for excluding m, but it excludes n as well. Hence
this "imply" keyword. The above becomes:
config DRIVER_A
tristate
imply SUBSYSTEM_X
config DRIVER_B
tristate
imply SUBSYSTEM_X
[...]
config SUBSYSTEM_X
tristate
This is much cleaner, and way more flexible than "select". SUBSYSTEM_X
can still be configured out, and it can be set as a module when none of
the drivers are configured in or all of them are modular.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Michal Marek <mmarek@suse.com>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull kconfig update from Michal Marek:
- fix for behavior of tristate choice items and fix for documentation
of existing kconfig behavior [Dirk Gouders]
- more helpful "unexpected data" kconfig warning [Paul Bolle]
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig/symbol.c: handle choice_values that depend on 'm' symbols
kconfig-language: elaborate on the type of a choice
kconfig-language: fix comment on dependency-generated menu structures.
kconfig: add unexpected data itself to warning
If choices consist of choice_values of type tristate that depend on
symbols set to 'm', those choice_values are not set to 'n' if the
choice is changed from 'm' to 'y' (in which case only one active
choice_value is allowed). Those values are also written to the config
file causing modules to be built when they should not.
The following config can be used to reproduce and examine the problem;
with the frontend of your choice set "Choice 0" and "Choice 1" to 'm',
then set "Tristate Choice" to 'y' and save the configuration:
config modules
boolean modules
default y
option modules
config dependency
tristate "Dependency"
default m
choice
prompt "Tristate Choice"
default choice0
config choice0
tristate "Choice 0"
config choice1
tristate "Choice 1"
depends on dependency
endchoice
This patch sets tristate choice_values' visibility that depend on
symbols set to 'm' to 'n' if the corresponding choice is set to 'y'.
This makes them disappear from the choice list and will also cause the
choice_values' value set to 'n' in sym_calc_value() and as a result
they are written as "not set" to the resulting .config file.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
If the .config parser runs into unexpected data it emits warnings like:
.config:6911:warning: unexpected data
Add the unexpected data itself to this warning. That makes it easier to
discover what is actually going wrong:
.config:6911:warning: unexpected data: CONFOG_CHARGER_TPS65217=m
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.com>
Also recognize standalone "prompt".
Before this patch we incorrectly identified some symbols as not having a
prompt and potentially needing to be selected by something else.
Note that this patch could theoretically change the resulting .config,
causing it to have fewer symbols turned on. However, given the current set
of Kconfig files, this situation does not occur because the symbols newly
added to %prompts are absent from %selects.
Link: http://lkml.kernel.org/r/1461696998-3953-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using `make localmodconfig` and friends, if the input config comes
from a kernel that was built in a different environment (for example, the
canonical case of using localmodconfig to trim a distribution kernel
config) the key files for module signature checking will not be available
and should be regenerated or omitted. Otherwise, the user will be faced
with annoying errors when trying to build with the generated .config:
make[1]: *** No rule to make target 'keyring.crt', needed by 'certs/x509_certificate_list'. Stop.
Makefile:1576: recipe for target 'certs/' failed
Link: http://lkml.kernel.org/r/1461696721-3001-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
That is clearly what the original intention was. This does not change the
output .config but it prevents some useless processing.
! eq "m" is changed to the simpler eq "y"; symbols with values other than
m|y are not included in %orig_configs.
Link: http://lkml.kernel.org/r/1460333193-16361-3-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Help text may start with "help" or "---help---". This patch fixes
read_kconfig() to recognize the second variant.
This removes useless junk from %depends and %selects. That junk is due to
help text that contains the words "selects" and "depends".
Link: http://lkml.kernel.org/r/1460333193-16361-2-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Based on the list in Documentation/kbuild/kconfig-language.txt
This removes junk from %depends because parsing of a menu entry spilled
over to another menu entry.
Link: http://lkml.kernel.org/r/1460333193-16361-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The parameter of Kconfig "source" statements does not need to be quoted.
The current regex causes many kconfig files to be skipped and hence,
dependencies to be missed.
Also fix the whitespace repeat count.
Link: http://lkml.kernel.org/r/1459619722-13695-1-git-send-email-bpoirier@suse.com
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used
to be equivalent to make allmodconfig; these days it hardwires MODULES to n.
In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is
treated as if it set it to n.
Regression had been introduced by commit cfa98f ("kconfig: do not
override symbols already set"); what happens is that conf_read_simple()
does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and
has conf_set_all_new_symbols() skip modules_sym.
It's pretty easy to fix - simply move that call of sym_calc_value()
into the callers, except for the ones in KCONFIG_ALLCONFIG handling.
Objections?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: cfa98f2e0a ("kconfig: do not override symbols already set")
Signed-off-by: Michal Marek <mmarek@suse.com>
Documentation/Changes still lists this as the minimal required version,
so it ought to remain usable for the time being.
Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
On Debian stable (qt-4.8.6) 'make xconfig' intermittently fails due to
qconf segfaulting at exit time in QXcbEventReader. The cause of this is
destructors on the heap objects never being called, so fix this by
properly deleting the heap objects before exit.
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
menu_is_visible() is a bool function and should use boolean return
values. "no" is a tristate value which happens to also have a value
of 0, but we should nevertheless use the right symbol for it.
This is a very minor cleanup with no semantic change.
Fixes: 86e187ff9 ("kconfig: add an option to determine a menu's visibility")
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The current (arbitrary) limit of 128 characters for path names has
proven too short for Android builds, as longer path names are used
there.
Change conf.c, so it can handle path lengths up to PATH_MAX characters.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull kconfig updates from Michal Marek:
- 'make xconfig' ported to Qt5, dropping support for Qt3
- merge_config.sh supports a single-input-file mode and also respects
$KCONFIG_CONFIG
- Fix for incorrect display of >= and > in dependency expressions
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
Add current selection check.
Use pkg-config to find Qt 4 and 5 instead of direct qmake
kconfig: Fix copy&paste error
kconfig/merge_config.sh: Accept a single file
kconfig/merge_config.sh: Support KCONFIG_CONFIG
Update the buildsystem for KConfig finding Qt
Port xconfig to Qt5 - Update copyright.
Port xconfig to Qt5 - Fix goParent issue.
Port xconfig to Qt5 - on Back clicked, deselect old item.
Port xconfig to Qt5 - Add(back) one click checkbox toggle.
Port xconfig to Qt5 - Add(back) lineedit editing.
Port xconfig to Qt5 - Remove some commented code.
Port xconfig to Qt5 - Source format.
Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
Port xconfig to Qt5 - Change ConfigItem constructor parent type.
Port xconfig to Qt5 - Disable ConfigList soring
Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
Port xconfig to Qt5 - Tree widget set column titles.
...
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
[mmarek: I missed it in the original Qt5 patch set, which caused a crash]
Signed-off-by: Michal Marek <mmarek@suse.com>
The Qt Project recommendation is that there should always be a "qmake"
binary and it should never be renamed. If it's necessary to handle
multiple Qt versions, the Qt Project recommends using qtchooser.
Unfortunately, some distros do not follow the recommendation, so we
would need to check qmake-qt4, qmake-qt5, etc. So, instead, let's try
pkg-config.
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Fixes: 31847b67be ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
My recent commit d2036f30cf ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.
This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.
The fix is simple, we need to look for the file under $(srctree).
Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
merge_config.sh can usefully be applied to a single file.
It implicitly merges with the default configuration.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
All make targets support $KCONFIG_CONFIG because they
run scripts/kconf. Make sure merge_config.sh accesses the
correct file in all cases.
Previously this script broke in two different code paths,
one for targets like kvmconfig (which use merge_config.sh -m
then call a target that respects KCONFIG_CONFIG) and one for
direct use of the script without -m, which called make rules
that edit KCONFIG_CONFIG but verified a different file.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).
For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
ConfigItem executes parent->takeChild(0)
while
ConfigList executes parent->takeTopLevelItem(0)
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Recursive dependency issues with kconfig are unavoidable due to
some limitations with kconfig, since these issues are recurring
provide a hint to the user how they can resolve these dependency
issues and also document why such limitation exists.
While at it also document a bit of future prospects of ways to
enhance Kconfig, including providing formal semantics and evaluation
of use of a SAT solver. If you're interested in this work or prospects
of it check out the kconfig-sat project wiki [0] and mailing list [1].
[0] http://kernelnewbies.org/KernelProjects/kconfig-sat
[1] https://groups.google.com/d/forum/kconfig-sat
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Bottomley <jbottomley@odin.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mate Soos <soos.mate@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Arch Makefiles can set KBUILD_DEFCONFIG to tell kbuild the name of the
defconfig that should be built by default.
However currently there is an assumption that KBUILD_DEFCONFIG points to
a file at arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
We would like to use a target, using merge_config, as our defconfig, so
adapt the logic in scripts/kconfig/Makefile to allow that.
To minimise the chance of breaking anything, we first check if
KBUILD_DEFCONFIG is a file, and if so we do the old logic. If it's not a
file, then we call the top-level Makefile with KBUILD_DEFCONFIG as the
target.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Marek <mmarek@suse.com>
Pull kconfig updates from Michal Marek:
- kconfig warns about junk characters in Kconfig files
- merge_config.sh error handling
- small cleanup
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
merge_config.sh: exit on missing input files
kconfig: Regenerate shipped zconf.{hash,lex}.c files
kconfig: warn of unhandled characters in Kconfig commands
kconfig: Delete unnecessary checks before the function call "sym_calc_value"
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Update the shipped files generated by flex and gperf to support the
explicit use of "---help---" and to emit warnings for unsupported
characters on COMMAND tokens.
As I could not find out which flex/gperf version was used to generate
the previous version, I used flex 2.5.35 and gperf 3.0.4 from
Ubuntu 14.04 - this also leads to the big number of changed lines
in this patch.
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
In Kconfig, definitions of options take the following form:
"<COMMAND> <PARAM> <PARAM> ...". COMMANDs and PARAMs are treated
slightly different by the underlying parser.
While commit 2e0d737fc7 ("kconfig: don't silently ignore unhandled
characters") introduced a warning for unsupported characters around
PARAMs, it does not cover situations where a COMMAND has additional
characters before it.
This change makes Kconfig emit a warning if superfluous characters
are found before COMMANDs. As the 'help' statement sometimes is
written as '---help---', the '-' character would now also be regarded
as unhandled and generate a warning. To avoid that, '-' is added to
the list of allowed characters, and the token '---help---' is included
in the zconf.gperf file.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The sym_calc_value() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.com>
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull kconfig updates from Michal Marek:
- kconfig conditions can use usual less/greater than comparisons
- kconfig warns about stray characters in Kconfig files
- bogus expression simplification removed
- some minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: re-generate *.c_shipped files after previous change
kconfig: allow use of relations other than (in)equality
kconfig: don't silently ignore unhandled characters
kconfig: Wrap long "make help" text lines
scripts/kconfig/Makefile: Cosmetic fixes
scripts/kconfig/Makefile: Fix spelling of Qt
Kconfig: Remove bad inference rules expr_eliminate_dups2()
This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:
make xenconfig
You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.
A few generic notes: we enable both of these:
CONFIG_INET=y
CONFIG_BINFMT_ELF=y
although technically not required given you likely will
end up with a pretty useless system otherwise.
A few architectural differences worth noting:
$ make allnoconfig; make xenconfig > /dev/null ; \
grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
grep XEN .config > arm64-config
Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.
Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
We'll be adding options for xen as well.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Over the years I found it desirable to be able to use all sorts of
relations, not just (in)equality. And apparently I'm not the only one,
as there's at least one example in the tree where the programmer
assumed this would work (see DEBUG_UART_8250_WORD in
arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the
two SMP/NR_CPUS prompts into one: SMP could be promptless, simply
depending on NR_CPUS > 1.
A (desirable) side effect of this change - resulting from numeric
values now necessarily being compared as numbers rather than as
strings - is that comparing hex values now works as expected: Other
than int ones (which aren't allowed to have leading zeroes), zeroes
following the 0x prefix made them compare unequal even if their values
were equal.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
At the very least we should tell people that what they wrote is not
what the utility understands.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:
(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y
They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:
(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1
while n evaluates to 0 and
(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1
with y evaluating to 2.
Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c
Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:
config MODULES
def_bool y
option modules
config FOO
def_tristate m
config BAR
def_tristate m
config TEST1
def_tristate y
depends on (FOO || BAR) && (!FOO && !BAR)
if TEST1 = n
comment "TEST1 broken"
endif
config TEST2
def_tristate y
depends on (FOO && BAR) || (!FOO || !BAR)
if TEST2 = y
comment "TEST2 broken"
endif
config TEST3
def_tristate y
depends on m && !m
if TEST3 = n
comment "TEST3 broken"
endif
TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.
As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is true that we do not want to move the code too far to the
right, but something like below is not preferred:
if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
echo Value of $CFG is redefined by fragment $MERGE_FILE:
echo Previous value: $PREV_VAL
echo New value: $NEW_VAL
echo
elif [ "$WARNREDUN" = "true" ]; then
echo Value of $CFG is redundant by fragment $MERGE_FILE:
fi
To fix this, call "continue" if the "grep" command fails to find the
given CONFIG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1. Add `+' to parent make rule.",
is displayed.
$ make -s defconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
$ make -j8 kvmconfig
Using ./.config as base
Merging ./arch/x86/configs/kvm_guest.config
[ snip ]
#
# merged configuration written to ./.config (needs make)
#
make[2]: warning: jobserver unavailable: using -j1. Add `+' to
parent make rule.
scripts/kconfig/conf --oldconfig Kconfig
[ snip ]
#
# configuration written to .config
#
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This was originally meant for dlopen()ing a potential kconfig shared
library. The unused dlopen code has already been removed in commit
5a6f8d2b (kconfig: nuke LKC_DIRECT_LINK cruft), so let's remove the
rest. The lkc_proto.h change was made with the following sed script:
sed -r 's/^P\(([^,]*), *([^,]*), *(.*)\);/\2 \1\3;/'
Plus some manual adjustments.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Two or more arguments are always expected. Show usage and exit if
given less.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
"Here are the kbuild changes for v3.19-rc1:
- Cleanups and deduplication in the main Makefile and
scripts/Makefile.*
- Sort the output of *config targets in make help
- Old <linux/version.h> is always removed to avoid a surprise during
bisecting
- Warning fix in kconfig"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: remove redundant -rR flag of hdr-inst
kbuild: Fix make help-<board series> on powerpc
kbuild: Automatically remove stale <linux/version.h> file
kconfig: Fix warning "‘jump’ may be used uninitialized"
Makefile: sort list of defconfig targets in make help output
kbuild: Remove duplicate $(cmd) definition in Makefile.clean
kbuild: collect shorthands into scripts/Kbuild.include
Pull perf fixes and cleanups from Ingo Molnar:
"A kernel fix plus mostly tooling fixes, but also some tooling
restructuring and cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf: Fix building warning on ARM 32
perf symbols: Fix use after free in filename__read_build_id
perf evlist: Use roundup_pow_of_two
tools: Adopt roundup_pow_of_two
perf tools: Make the mmap length autotuning more robust
tools: Adopt rounddown_pow_of_two and deps
tools: Adopt fls_long and deps
tools: Move bitops.h from tools/perf/util to tools/
tools: Introduce asm-generic/bitops.h
tools lib: Move asm-generic/bitops/find.h code to tools/include and tools/lib
tools: Whitespace prep patches for moving bitops.h
tools: Move code originally from asm-generic/atomic.h into tools/include/asm-generic/
tools: Move code originally from linux/log2.h to tools/include/linux/
tools: Move __ffs implementation to tools/include/asm-generic/bitops/__ffs.h
perf evlist: Do not use hard coded value for a mmap_pages default
perf trace: Let the perf_evlist__mmap autosize the number of pages to use
perf evlist: Improve the strerror_mmap method
perf evlist: Clarify sterror_mmap variable names
perf evlist: Fixup brown paper bag on "hint" for --mmap-pages cmdline arg
perf trace: Provide a better explanation when mmap fails
...
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/
pattern "calloc\s*(\s*sizeof".
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warning:
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function ‘get_symbol_str’:
scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized]
jump->offset = strlen(r->s);
Simplifies the test logic because (head && local) means (jump != 0)
and makes GCC happy when checking if the jump pointer was initialized.
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There's no such thing as "list_struct".
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull kbuild changes from Michal Marek:
- fix for handling dependencies of *-objs targets by Masahiro Yamada
- lots of cleanups in the kbuild machinery, also by Masahiro
- fixes for the kconfig build to use an UTF-8 capable ncurses library
if possible and to build on not-so-standard installs
- some more minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not reference *-n variables in the Makefile
kbuild: simplify build, clean, modbuiltin shorthands
kbuild: arm: Do not define "comma" twice
kbuild: remove obj-n and lib-n handling
kbuild: remove unnecessary variable initializaions
kbuild: remove unnecessary "obj- := dummy.o" trick
kbuild: handle C=... and M=... after entering into build directory
kbuild: use $(Q) for sub-make target
kbuild: fake the "Entering directory ..." message more simply
kconfig/lxdialog: get ncurses CFLAGS with pkg-config
kconfig: nconfig: fix multi-byte UTF handling
kconfig: lxdialog: fix spelling
kbuild: Make scripts executable
kbuild: remove redundant clean-files from scripts/kconfig/Makefile
kbuild: refactor script/kconfig/Makefile
kbuild: handle the dependency of multi-objs hostprogs appropriately
kbuild: handle multi-objs dependency appropriately
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, Kconfig descriptions that use multi-byte UTF-8 characters
(such as MTD_NAND_CAFE) will have their menu entries dropped from the
'make nconfig' ncurses menu, and all subsequent entries in the same
window will be omitted. This seems to be due to the ncurses 'menu'
library, which does not traditionally handle UTF-8 >8-bit characters
properly.
The ncursesw library ('w' is for "wide") is written to handle these
UTF-8 characters, and is practically a drop-in replacement at the source
level. Use it by default, if available.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=43067
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Walch <walch.martin@web.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now it is harmless to add all host programs to hostprogs-y.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit 5d2acfc7b9 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.
However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.
Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel. This provides a
better baseline for embedded systems or efforts to reduce kernel size.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
The new mergeconfig helper makes it easier to add other partial
configurations similar to kvmconfig. Architecture-independent portions
of those partial configurations should go in
kernel/configs/${name}.config, and architecture-dependent portions
should go in arch/${arch}/configs/${name}.config.
Based on a patch by Luis R. Rodriguez <mcgrof@suse.com>.
Originally-Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Modified to make the helper name more general than just virtualization,
support architecture-dependent and architecture-independent partial
configurations, move the helper and kvmconfig to
scripts/kconfig/Makefile, and factor out more of the common file path.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Pull kbuild misc updates from Michal Marek:
"This is the non-critical part of kbuild for v3.16-rc1:
- make deb-pkg can do s390x and arm64
- new patterns in scripts/tags.sh
- scripts/tags.sh skips userspace tools' sources (which sometimes
have copies of kernel structures) and symlinks
- improvements to the objdiff tool
- two new coccinelle patches
- other minor fixes"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts: objdiff: support directories for the augument of record command
scripts: objdiff: fix a comment
scripts: objdiff: change the extension of disassembly from .o to .dis
scripts: objdiff: improve path flexibility for record command
scripts: objdiff: remove unnecessary code
scripts: objdiff: direct error messages to stderr
scripts: objdiff: get the path to .tmp_objdiff more simply
deb-pkg: Add automatic support for s390x architecture
coccicheck: Add unneeded return variable test
kbuild: Fix a typo in documentation
kbuild: trivial - use tabs for code indent where possible
kbuild: trivial - remove trailing empty lines
coccinelle: Check for missing NULL terminators in of_device_id tables
scripts/tags.sh: ignore symlink'ed source files
scripts/tags.sh: add regular expression replacement pattern for memcg
builddeb: add arm64 in the supported architectures
builddeb: use $OBJCOPY variable instead of objcopy
scripts/tags.sh: ignore code of user space tools
scripts/tags.sh: add pattern for DEFINE_HASHTABLE
.gitignore: ignore Module.symvers in all directories
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
"make allnoconfig" exists to ease testing of minimal configurations.
Documentation/SubmitChecklist includes a note to test with allnoconfig.
This helps catch missing dependencies on common-but-not-required
functionality, which might otherwise go unnoticed.
However, allnoconfig still leaves many symbols enabled, because they're
hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT. For instance, allnoconfig
still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't
typically get build-tested with those disabled.
To address this, introduce a new Kconfig option "allnoconfig_y", used on
symbols which only exist to hide other symbols. Set it on CONFIG_EMBEDDED
(which then selects CONFIG_EXPERT). allnoconfig will then disable all the
symbols hidden behind those.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently localmodconfig will miss dependencies from the default option.
For example:
config FOO
default y if BAR || ZOO
If FOO is needed for a module and is set to '=m', and so are BAR or ZOO,
localmodconfig will not see that BOO or ZOO are also needed for the foo
module, and will incorrectly disable them.
Link: http://lkml.kernel.org/r/20131218175137.162937350@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the qconf program invoked by 'make xconfig' stores GUI
settings in the file ~/.config/Unknown\ Organization.conf. This name
is apparently generated by the QSettings class when no organisation
or application name are specified.
This is obviously not a sensible filename (nor does it seem sensible
that these QSettings parameters are optional!). Pass the names
'kernel.org' and 'qconf', resuling in the filename
~/.config/kernel.org/qconf.conf.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The struct gstr has a capacity that may differ from the actual string length.
However, a string manipulation in the function search_conf made the assumption
that it is the same, which led to messing up some search results, especially
when the content of the gstr in use had not yet reached at least 63 chars.
Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@suse.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The definition ws [ \n\t] is not used anywhere. Drop it to avoid confusion.
As it is a dead definition, any changes in the resulting code generated by
flex would be surprising (actually testing this showed that there are really
no changes). So, there is no need to touch the existing zconf.lex.c_shipped.
Signed-off-by: Martin Walch <walch.martin@web.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN: <yann.morin.1998@free.fr>
Each symbol must have exactly one type assigned. However, if a symbol happens
to have two different types assigned at runtime, a warning is printed and the
first type is preserved while the second type is being ignored.
The warning message says
type of <symbol name> redefined from <first type> to <second type>
which may be misleading as it may create the impression that the second type
replaces the first type.
This patch clarifies this by changing the warning to
ignoring type redefinition of <symbol name> from <first type> to <second type>
Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This fixes lots of typos in comments and strings.
It also updates the documentation strings in mconf to reflect the changes in
the user interface from the two commits
6364fd0cb1
menuconfig: Add Save/Load buttons
1bdbac478a
menuconfig: Get rid of the top-level entries for "Load an Alternate/Save an Alternate"
And it updates the layout of the example search result, i. e. moves down the
"Defined at" and "Depends on" lines and adds a symbol state ([=n]) to the
symbol in the "Selected by" line.
Furthermore, the help texts now should fit in 80 columns again when viewed
in mconf.
Signed-off-by: Martin Walch <walch.martin@web.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
replace the question mark in the comment after SYMBOL_WRITE with an explanation
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Previously, it was possible to have more than one symbol with the
'option modules' attached to them, although only the last one would
in fact control tristates.
Since this does not make much sense, only allow at most one symbol to
control tristates.
Note: it is still possible to have more than one symbol that control
tristates, but indirectly:
config MOD1
bool "mod1"
select MODULES
config MOD2
bool "mod2"
select MODULES
config MODULES
bool
option modules
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Regenerate bison parser after changes made in:
6902dcc: kconfig: do not special-case 'MODULES' symbol
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, the 'MODULES' symbol is hard-coded to be the default symbol
that enables/disables tristates, if no other symbol was declared with
'option modules'.
While this used to be needed for the Linux kernel, we now have an
explicit 'option modules' attached to the 'MODULES' symbol (since
cset 11097a036), so we no longer need to special-case it in the
kconfig code.
Furthermore, kconfig is extensively used out of the Linux kernel, and
other projects may have another meaning for a symbol named 'MODULES'.
This patch changes the way we enable/disable tristates: if a symbol was
found with 'option modules' attached to it, then that symbol controls
enabling tristates. Otherwise, tristates are disabled, even if a symbol
named 'MODULES' exists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:
include/config/auto.conf:3014:warning: symbol value 'm' invalid for
HOTPLUG_PCI_PCIE
Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
git checkout 1fe0135
make mrproper
make allmodconfig
make silentoldconfig
git checkout aa8032b
make allmodconfig
make silentoldconfig
Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.
The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.
Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.
Thread in:
http://marc.info/?l=linux-pci&m=137569198904000&w=2
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Instead of using "long" for kconfig "hex" and "range" values, which may
change in size depending on the host architecture, use "long long". This
will allow values greater than INT_MAX on 32-bit hosts when cross
compiling.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
There is no need for a double indirection in the temporary array that
stores the internediate search results.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
The temporary array that stores the search results is not NULL-terminated,
so there is no reason to allocate n+1 elements.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Two minor style fixes:
- no space before/after parenthesis in function definition
- no {} for single-line if()
And one grammar fix in a comment.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
No need to repeat the 'CONFIG_' string in the title,
once is explicit enough.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Calls to strlen are costly, so avoid calling strln as much as we can.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Pull kconfig updates from Michal Marek:
- dependency solver fix for make defconfig
- randconfig fixes, one of which had to be reverted again
- more user-friendly sorting of search results
- hex and range keywords support longs
- fix for [mn]conf not to rely on particular behavior of the LINES and
COLS variables
- cleanup of magic constants in kconfig/lxdialog
- [mn]conf formatting fixes
- fix for scripts/config's help text in out-of-tree usage (under a
different name)
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: allow "hex" and "range" to support longs
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
kconfig: loop as long as we changed some symbols in randconfig
kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
kconfig: sort found symbols by relevance
kconfig/conf: print the seed used to initialise the RNG for randconfig
kconfig/conf: accept a base-16 seed for randconfig
kconfig/conf: fix randconfig setting multiple symbols in a choice
scripts/config: replace hard-coded script name by a dynamic value
mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
nconf: use function calls instead of ncurses' variables LINES and COLS
mconf: use function calls instead of ncurses' variables LINES and COLS
kconfig/lxdialog: handle newline characters in print_autowrap()
kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
kconfig/lxdialog: Add definitions for mininimum (re)size values
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The parsing routines for Kconfig files use strtol(), but store and
render values as int. Switch types and formating to long to support a
wider range of values. For example, 0x80000000 wasn't representable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This reverts commit 8357b48549.
It breaks more stuff than it fixes.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
Changes v3 -> v4
- fix previous issue where some choices would not be set, which would
cause silentoldconfig to ask for them and was then breaking this
workflow (as reported by Arnd and Sedat):
KCONFIG_ALLCONFIG=foo.defconfig make randconfig
make silentoldconfig </dev/nullo
which I have tested (3h28min!) with:
touch defconfig
for(( i=0; i<10000; i++ )); do
KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
make silentoldconfig </dev/null >/dev/null 2>&1 || break
done
which did not break at all.
- change done in v3 (below) is already fixed by a previous patch
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
When searching for symbols, return the symbols sorted by relevance.
Sorting is done as thus:
- first, symbols that match exactly
- then, alphabetical sort
Since the search can be a regexp, it is possible that more than one symbol
matches exactly. In this case, we can't decide which to sort first, so we
fallback to alphabeticall sort.
Explain this (new!) sorting heuristic in the documentation.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Roland Eggner <edvx1@systemanalysen.net>
Cc: Wang YanQing <udknight@gmail.com>
--
Changes v1->v2:
- drop the previous, complex heuristic in favour of a simpler heuristic
that is both easier to understand, *and* to maintain (Jean)
- explain sorting heuristic in the doc (Jean)
Currently, randconfig may set more than one symbol in a given choice.
Given this config file:
config A
bool "A"
if A
choice
bool "B/C/D"
config B
bool "B"
config C
bool "C"
config D
bool "D"
endchoice
endif # A
Then randconfig generates such .config files (case where A is not set is not
shown below for brevity), and where only the right-most .config is valid:
CONFIG_A=y CONFIG_A=y CONFIG_A=y
CONFIG_B=y CONFIG_B=y CONFIG_B=y
CONFIG_C=y # CONFIG_C is not set # CONFIG_C is not set
# CONFIG_D is not set CONFIG_D=y # CONFIG_D is not set
That is, in a randomised choice, the first symbol is always selected,
and at most one other symbol may be selected.
This is due to symbol randomised in a choice not being properly flagged
as having a value.
Fix that by flagging those symbols adequately: have a user-defined value,
and be not valid (to force recalculation of the symbol).
Note: if the choice is not conditional, then the randomisation is properly
done.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
[yann.morin.1998@free.fr: independently re-done the same patch as Matthieu,
as pointed out by Sedat]
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Submenus are sometimes empty and it would be nice if there is
something that notifies us that we should not expect any content
_before_ we enter a submenu.
A new function menu_is_empty() was introduced and empty menus and
menuconfigs are now marked by "----" as opposed to non-empty ones that
are marked by "--->".
This scheme was suggested by "Yann E. MORIN" <yann.morin.1998@free.fr>.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.
Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls or macros
to get window dimensions.
The use of the variables in main() was OK, but for the sake of
consistency it was modified to use the macro getmaxyx().
[1] ncurses(3X)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: declare 'lines' and 'columns' on a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.
Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls to get
window dimensions.
init_dialog() could make use of the variables, but for the sake of
consistency we do not change it's current use of the macro getmaxyx().
[1] ncurses(3X)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When exiting menuconfig with unsaved changes, a dialog like
the following is shown:
Do you wish to save your new configuration ? <ESC><ESC>
to continue.
The author of the dialog text specified a newline after the '?',
and probably expected it to be processed, so let print_autowrap()
handle newlines propperly.
Also, reword that dialog's second phrase with a real sentence.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: very slightly tweak the commit message]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a cleanup which uses the proper (new) definitions and does
not change current behaviour.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
Yann had some more ideas on improvements:
"What would be nice is an improvement that scales the choice window to
the number of entries in the choice. If there are a lot of choice
entries, then the choice popup grows in height (but does not overflow
the screen of course). So, instead of seeing only 6 entries, we'd see
as much as possible in the current screen.
Ditto for the width: the popup adapts to the longest prompt (but does
not overflow the screen either, of course), so prompts are not
truncated."
NOTE: This patch requires [1].
[1] http://marc.info/?l=linux-kbuild&m=137128726917166&w=2
Commit c8dc68ad0f ("kconfig/lxdialog: support resize") added support
for resizing, but forgot to collect all hardcoded values at one single
place.
Also add a definition for the check for a minimum screen/window size
of 80x19.
[ ChangeLog v3:
* Rename MENU_{HEIGTH,WIDTH}_MIN -> MENUBOX_{HEIGTH,WIDTH}_MIN
ChangeLog v2:
* Rename WIN_{HEIGTH,WIDTH}_MIN -> WINDOW_{HEIGTH,WIDTH}_MIN
* Mention the check for a minimum screen/window size in the changelog
* Add a comment above the block of new definitions ]
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
menu_add_prop() applies upper menus' visibilities to actual prompts
by AND-ing the prompts visibilities with the upper menus ones.
This creates a further reference to the menu's visibilities and when
the expression reduction functions do their work, they may remove or
modify expressions that have multiple references, thus causing
unpredictable side-effects.
The following example Kconfig constructs a case where this causes
problems: a menu and a prompt which's visibilities depend on the same
symbol. When invoking mconf with this Kconfig and pressing "Z" we
see a problem caused by a free'd expression still referenced by the
menu's visibility:
------------------------------------------------------------------------
mainmenu "Kconfig Testing Configuration"
config VISIBLE
def_bool n
config Placeholder
bool "Place holder"
menu "Invisible"
visible if VISIBLE
config TEST_VAR
bool "Test option" if VISIBLE
endmenu
------------------------------------------------------------------------
This patch fixes this problem by creating copies of the menu's
visibility expressions before AND-ing them with the prompt's one.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: move variable into its block-scope,
keep lines <80 chars, typo]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When entering an empty dialog, using the movement keys resulted in
unexpected characters beeing displayed, other keys like "z" and "h"
did not work as expected.
This patch handles the movement keys as well as other keys, especially
"z", "h" and "/".
Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: keep lines <80 chars, so reorder test]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Pull kconfig updates from Michal Marek:
- use pkg-config to detect curses libraries
- clean up the way curses headers are searched
- Some randconfig fixes, of which one had to be reverted
- KCONFIG_SEED for randconfig debugging
- memuconfig memory leak plugged
- menuconfig > breadcrumbs > navigation
- xconfig compilation fix
- Other minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: fix lists definition for C++
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
kconfig: implement KCONFIG_PROBABILITY for randconfig
kconfig: allow specifying the seed for randconfig
kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
kconfig: do not override symbols already set
kconfig: fix randconfig tristate detection
kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h
menuconfig: Add "breadcrumbs" navigation aid
menuconfig: Fix memory leak introduced by jump keys feature
merge_config.sh: Avoid creating unnessary source softlinks
kconfig: optionally use pkg-config to detect ncurses libs
menuconfig: optionally use pkg-config to detect ncurses libs
Searching for PPC_EFIKA results in a segmentation fault, and it's
because get_symbol_prop() returns NULL.
In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/
52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows
this symbol when it parses sound/soc/fsl/Kconfig:
config SND_MPC52xx_SOC_EFIKA
tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
depends on PPC_EFIKA
This bug was introduced by commit bcdedcc1af ("menuconfig: print more
info for symbol without prompts").
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Tested-by: Libo Chen <libo.chen@huawei.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we search a config symbol, if it has no prompt the position of this
symbol in the Kconfig file and it's dependencies are not printed. This
can be inconvenient, especially when it's set to n and we want to find out
why.
the following is an example:
before:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Selected by: X86 [=y]
after:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Defined at arch/Kconfig:213
Selected by: X86 [=y]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bug was reported that caused localmodconfig to not keep all the
dependencies of ATH9K. This was caused by the kconfig file:
In drivers/net/wireless/ath/Kconfig:
---
if ATH_CARDS
config ATH_DEBUG
bool "Atheros wireless debugging"
---help---
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
source "drivers/net/wireless/ath/wil6210/Kconfig"
endif
---
The current way kconfig works, it processes new source files after the
first file is completed. It creates an array of new source config files
and when the one file is finished, it continues with the next file.
Unfortunately, this means that it loses the fact that the source file is
within an "if" statement, and this means that each of these source file's
configs will not have the proper dependencies set.
As ATH9K requires ATH_CARDS set, the localmodconfig did not see that
dependency, and did not enable ATH_CARDS. When the oldconfig was run, it
forced ATH9K to be disabled.
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291022320.9234@oneiric
Cc: stable@vger.kernel.org # 3.8+
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a config for a module is added to the list to save in the final
config file, add a print to show what dependencies are used. This is
useful to debug when a config is disabled by the make oldconfig after
localmodconfig is finished.
This print only appears if the environment variable LOCALMODCONFIG_DEBUG
is defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The C++ compiler is more strict in that it refuses to assign
a void* to a struct list_head*.
Fix that by explicitly casting the poisonning constants.
(Tested with all 5 frontends, now.)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Poirier <bpoirier@suse.de>
Currently the odds to set each symbol is (rounded):
booleans: y: 50% n: 50%
tristates: y: 33% m: 33% n: 33%
Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
KCONFIG_PROBABILITY y:n split yⓂ️n split
-----------------------------------------------------------------
[1] unset or empty 50 : 50 33 : 33 : 34
[2] N N : 100-N N/2 : N/2 : 100-N
N:M N+M : 100-(N+M) N : M : 100-(N+M)
N:M:L N : 100-N M : L : 100-(M+L)
[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
http://git.buildroot.org/buildroot/commit/?id=3435c1afb5
Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For reproducibility, it can be useful to be able to specify the
seed to use to seed the RNG.
Add a new KCONFIG_SEED environment variable which can be set to
the seed to use:
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
It's very usefull for eg. debugging the kconfig parser.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Also, as a side-efect, this patch fixes the following case:
---8<---
choice
config OPTION_A
bool "Option A"
config OPTION_B
bool "Option B"
config OPTION_C
bool "Option C"
endchoice
---8<---
which could previously generate such .config files:
---8<--- ---8<---
CONFIG_OPTION_A=y CONFIG_OPTION_A=y
CONFIG_OPTION_B=y # CONFIG_OPTION_B is not set
# CONFIG_OPTION_C is not set CONFIG_OPTION_C=y
---8<--- ---8<---
Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.
This patch ensures that only one option may be set for a choice.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
---
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.
Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current code does this:
if [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
elif [ -f /usr/include/ncurses/curses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
[...]
This is merely inconsistent:
- adding the full path to the directory in the -I directive,
- especially since that path is already a sub-path of the system
include path,
- and then repeating the sub-path in the #include directive.
Rationalise each include directive:
- only use the filename in the #include directive,
- keep the -I directives: they are always searched for before the
system include path; this ensures the correct header is used.
Using the -I directives and the filename-only in #include is more in
line with how pkg-config behaves, eg.:
$ pkg-config --cflags ncursesw
-I/usr/include/ncursesw
This paves the way for using pkg-config for CFLAGS, too, now we use it
to find the libraries.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Displays a trail of the menu entries used to get to the current menu.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: small, trivial code re-ordering]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes the memory leak of struct jump_key allocated in get_prompt_str()
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: stable@vger.kernel.org
Viresh noticed when using merge_config.sh that a source softlink
was being created even when he didn't specify the -O option.
The problem arises due to the previous commit 409f117e2d
which added the -O option. Basically if -O is not specified,
we still pass '-O=.' to the make command, which then generates
a source softlink to ./
This patch adds an extra check so if there is no -O specified
to merge_config.sh, we don't pass one on to make.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Reported-and-tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old way of directly specifying libs will be
used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
[yann.morin.1998@free.fr: fix typo: '-ncurses' --> '-lncurses']
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old heuristic for detection of the ncurses libs
will be used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to Documentation/kbuild/kconfig.txt, the commands:
yes "" | make oldconfig >conf.new
grep "(NEW)" conf.new
should list the new config symbols with their default values.
However, currently there is no line break after each new symbol. When
kconfig is interactive the user will type a new-line at this point,
but when non-interactive kconfig must print it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reference: http://bugs.debian.org/636029
[regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree]
Reported-and-tested-by: Regid Ichira <regid23@nt1.in>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
>From: Roland Eggner <edvx1@systemanalysen.net>
More reasonable labels of function keys line. Rename labels and keep menu
width, as required for fitting on COLUMNS=80 terminals:
• s/Insts/Help 2/
• s/Config/ShowAll/
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>From: Roland Eggner <edvx1@systemanalysen.net>
Rewrite all help texts. During several years lazy (incomplete) updates have
left behind a rather thick layer of dust. Intentions:
(1) Global help called by <F1> should document all _currently_ implemented
keybindings.
(2) Different help texts called by <F3> resp. <F8><F1> should be consistent
with (1) and with implementation:
• on plain menu entry
• in radiolist window
• in input windows for text, decimal or hexadecimal values
• in filename selection windows <F6> <F7>
• SymSearch specific help called by <F8> followed by <F1>
(3) More reasonable window titles:
Rename window title s/README/Global help/
Rename variable s/nconf_readme/nconf_global_help/
Rename window title s/Instructions/Short help/
(4) Consider which hints are most useful for first-time-users.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: a few additional fixes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using make xconfig, the following compilation error appears :
/usr/include/qt3/qvaluelist.h:427:13: error: ‘ptrdiff_t’ does not name a type
Including stddef.h in scripts/kconfig/qconf.cc permits to avoid this error.
Signed-off-by: Tiana Rakotovao Andriamahefa <rkmahefa@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
• In function keys line descriptions black on darkblue are almost
impossible to read. Change colors to black on brown.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now we have Load/Save buttons to do the Load/Save
in the convenient place, so we can drop the
top-level entries.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
If menuconfig have Save/Load button like alternative
.config editors, xconfig, nconfig, etc.We will have
a obvious benefit when use menuconfig just like
when we use others, we can Save/Load our .config quickly
and conveniently.
This patch add the Save/Load button for menuconfig.
[remove trailing space while at it for below line:
"*) Formerly when I used Page Down and Page Up, the cursor would be set"
]
Changes:
V1-V2:
1:use PATH_MAX instead of hard code suggested by Yann E. MORIN
2:drop the spurious empty-line removal suggested by Yann E. MORIN
V2-V3:
1:ajust buttons position well centered reported by Yann E. MORIN
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
dialog.h has two line the same below:
extern char dialog_input_result[];
This patch remove one of them.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch add support navigate input position *inside* the input
field with LEFT/RIGHT, so it is possible to modify the text in place.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that we get the CONFIG_ prefix from the environment, we must
ensure we use the proper prefix in case the user has it set in
the environment.
Simply unexport CONFIG_ to fallback to our hard-coded default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Provide a -O option to specify dir to put generated .config
Then merge_config.sh does not need to be copied to target dir,
for easy re-usage in other script
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, the CONFIG_ prefix is hard-coded in the kconfig frontends
executables. This means that two projects that use kconfig with
different prefixes can not share the same kconfig frontends.
Instead of hard-coding the prefix in the frontends, get it from the
environment, and revert back to hard-coded value if not found.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, we get the CONFIG_ prefix via the CONFIG_ macro, which means
the CONFIG_ prefix is hard-coded at compile time. This goes against
having a run-time defined CONFIG_ prefix.
Add a function that returns the CONFIG_ prefix to use (but keep the
current hard-coded behavior, to be changed in a later patch).
To avoid touching all the code that uses the CONFIG_ macro, we just
undef it, and define it to be a call to the function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Having the CONFIG_ prefix in string constants gets in the way of
using a run-time-defined CONFIG_ prefix.
Fix that by using temp growable strings (gstr) in which we printf
the text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The ncurses library allows for extended colors. The support for extended
colors support depends on wide-character support. ncurses headers
enable extended colors (NCURSES_EXT_COLORS) only when wide-character
support is enabled (NCURSES_WIDECHAR).
The "make menuconfig" uses wide-character ncursesw library, which can be
compiled with wide-character support, but does not define NCURSES_WIDECHAR
and it's using headers without wide-character (and extended colors) support.
This fixes problems with colors on systems with enabled extended colors
(like PLD Linux). Without this patch "make menuconfig" is hard to use.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
sys/queue.h and CIRCLEQ in particular have proven to cause portability
problems (reported on Debian Sarge, Cygwin and FreeBSD)
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kconfig changes from Michal Marek:
"kconfig in v3.7 is going to
- initialize ncurses only once in menuconfig
- be able to jump to a search result in menuconfig
- change the misnomer oldnoconfig to a more meaningful name
olddefconfig, keeping the old name as alias"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
menuconfig: Assign jump keys per-page instead of globally
menuconfig: Do not open code textbox scroll up/down
menuconfig: Add jump keys to search results
menuconfig: Extend dialog_textbox so that it can return to a scrolled position
menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
menuconfig: Remove superfluous conditionnal
kconfig: document oldnoconfig to what it really does in conf.c
kconfig/mconf.c: revision of curses initialization.
Pull kbuild fixes from Michal Marek:
"Here are two fixes I intended to send after v3.6-rc7, but failed to do
so. So please pull them for v3.7-rc1 and they will be picked up by
stable.
The first one fixes gcc -x <language> syntax in various build-time
tests, which icecream and possible other gcc wrappers did not
understand (and yes, icecream is going to be fixed as well).
The second one fixes make tar-pkg so that unpacking the tarball does
not replace the /lib -> /usr/lib symlink on recent Fedora releases."
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Fix gcc -x syntax
kbuild: Do not package /boot and /lib in make tar-pkg
The correct syntax for gcc -x is "gcc -x assembler", not
"gcc -xassembler". Even though the latter happens to work, the former
is what is documented in the manual page and thus what gcc wrappers
such as icecream do expect.
This isn't a cosmetic change. The missing space prevents icecream from
recognizing compilation tasks it can't handle, leading to silent kernel
miscompilations.
Besides me, credits go to Michael Matz and Dirk Mueller for
investigating the miscompilation issue and tracking it down to this
incorrect -x parameter syntax.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Bernhard Walle <bernhard@bwalle.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The kbuild target 'localyesconfig' has been same as 'localmodconfig'
since the commit 50bce3e "kconfig/streamline_config.pl: merge
local{mod,yes}config". The commit expects this script generates
different configure depending on target, but it was not yet implemented.
So I added code that sets to 'yes' when target is 'localyesconfig'.
Link: http://lkml.kernel.org/r/1349101470-12243-1-git-send-email-yuta.and@gmail.com
Cc: stable@vger.kernel.org # v3.2
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Yuta Ando <yuta.and@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@rostedt.homelinux.com>
As 67d34a6a39 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.
So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
At the moment, keys 1-9 are assigned to the first 9 search results. This patch
makes them assigned to the first 9 results per-page instead. We are much less
likely to run out of keys that way.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We don't need to explicitely use ncurses' scroll(). ncurses performs
vertical-motion optimization at wrefresh() time.
Using strace I confirmed that with the following patch curses still sends only
the new line of text to the terminal when scrolling up/down one line at a
time.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
makes it possible to jump directly to the menu for a configuration entry after
having searched for it with '/'. If this menu is not currently accessible we
jump to the nearest accessible parent instead. After exiting this menu, the
user is returned to the search results where he may jump further in or
elsewhere.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We can now display other UI elements (menus) "on top" of a textbox and then
seemingly come back to it in the same state it was left.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The caller will be able to perform actions based on hotkeys in the displayed
text.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Because end_reached is set to 0 before the loop, the test "!end_reached" is
always true and can be removed. This structure was perhaps copied from the
similar one in back_lines().
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As 67d34a6a39 said, the make target
'oldnoconfig' is a misnomer. It doesn't set new symbols to 'n', but
instead sets it to their default values.
This patch fixes the document in conf.c, and will submit another patch
to replace 'oldnoconfig' to 'olddefconfig'
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit d0e1e09568 initscr() is called twice in mconf.
Do it only in init_dialog() in util.c and there also save the
cursor position for the signal handler in mconf.c.
Signed-off-by: Dirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
perlcritic complains about $kconfig being reused in the foreach loop
at the end of read_kconfig. Change it to a my variable.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Convert remaining open calls to use the perl's preferred 3 parameter
open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change find_config function to read_config. It now finds the config,
reads the config into an array, and returns the array. This makes it
a little cleaner and changes the open to use perl's 3 option open.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running streamline_config.pl as it's shown it in the comment header,
you will get a warning about $ksource being uninitialized. This is
because $ksource is set to ARGV[0], but the examples don't require any
arguments. Fix by setting ksource to . if no ARGV[0] is given.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=pYw7
-----END PGP SIGNATURE-----
Merge tag 'localmodconfig-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig
Pull localmodconfig updates from Steven Rostedt:
"Improve localmodconfig to remove even more unused module configs.
These changes drastically improve the amount of module configs removed
from a config file. It also adds some debug that I can have users
easily enable if things do not work for them."
* tag 'localmodconfig-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig:
localmodconfig: Add debug environment variable LOCALMODCONFIG_DEBUG
localmodconfig: Check if configs are already set for selects
localmodconfig: Read in orig config file to avoid extra processing
localmodconfig: Comments and cleanup for streamline_config.pl
The make target 'oldnoconfig' is a misnomer. It doesn't set new symbols
to 'n', but instead sets it to their default values.
Unfortunately, assuming that it actually did this, broke ktest in some
of its tests. For example, the tests to create a minimum config and even
a config bisect, depends on removing various configs and using
oldnoconfig to get rid of other configs that may have depended on it.
But because some configs that it was trying to disable, were in fact
default enabled, this caused those configs to re-enable and corrupt the
test.
I thought about fixing oldnoconfig, but I'm afraid that people are
already dependent on its current behavior. Instead, I'm just updating
the documentation to state that it sets the new symbols to their default
values and not to 'n'.
Ideally, this would be called, 'olddefconfig' and we have an
'oldnoconfig' that actually disables the new symbols. But it's useless
for me now. If it changed, ktest would need to be consistent between
each version, and that would be to difficult to detect. I'll handle this
issue with ktest with other means.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
They function just like they do in less(1).
Also correct some discrepancy between the help text and the code wrt
function keys.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.
Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.
Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 5a6f8d2bd9 ("kconfig: nuke
LKC_DIRECT_LINK cruft") removed all traces of lkc_defs.h from the tree.
Remove its entries in dontdiff and kconfig's .gitignore file too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Also add a dependency on .tmp_qtcheck for KC_QT_MOC.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Various schemes exist to allow parallel installations of multiple major
versions of Qt (4.x with the previous 3.x and/or the upcoming 5.x).
QtCore.pc includes a moc_location variable which should be a more reliable
way to find moc.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Import libraries on Cygwin and MinGW/MSYS use the .dll.a suffix, so
checking this suffix is necessary to make sure ncurses will still be
found when built without static libraries.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Commit 8c41e5e363 added a check for
ncursesw/curses.h for the case where ncurses and ncursesw are build
separately but only one is installed. But if both are installed,
the headers ncurses/curses.h and ncursesw/curses.h differ, and since
libncursesw will be found first, so should ncursesw/curses.h.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
ESCDELAY is a global variable which is replaced by getter and setter
functions with NCURSES_REENTRANT. This fixes the following error:
nconf.c: In function ‘main’:
nconf.c:1506:2: error: lvalue required as left operand of assignment
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If the environment variable LOCALMODCONFIG_DEBUG is set, then debug output
will appear in the make localmodconfig. This will simplify debugging what
people get with their output, as I can just tell people to do:
LOCALMODCONFIG_DEBUG=1 make localmodconfig 2>out.txt
and have them send me the out.txt. I'll be able to see why things are not
working as they think it should be.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some cases that a required module does not have a prompt
and needs to have another module enabled that selects it to be set.
As localmodconfig is conservative and tries to make the minimum config
without breaking the user's kernel, or keeping the user from using
devices that were loaded when the lsmod was done, all modules that
select this module will also be enabled.
If you needed module A, but module A did not have a prompt but needed
module B to be selected, localmodconfig would make sure B was still
enabled. If not only B selected A, but C, D, E, F, and G also
selected A, then all of those would also be included, as well as the
modules they depend on. This ballooned the number of configs that
localmodconfig would keep.
The fix here is to process the depends first, and then record those
configs that did not have a prompt and needed to be selected.
After the depends are done, check what configs are needed to select
the configs in the list, and if a config that selects it is already
set, then we don't need to do anything else.
If no config that selects the config is set, then just pick one and
try again.
This change brought down the number of selected modules from 290
to 67! Both before and after were run against a config that had 3095
modules enabled.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Read in the entire config file. If there's a config that we depend on
that happens to be in the core set (not a module) then we do not need
to process it as a module.
Currently, we follow the entire depend and selects even if they
are enabled as core and not modules. By checking to make sure that we
only look at modules we can drop the count a little.
From one of my tests, localmodconfig went from taking 3095 set modules
down to 356 before this patch, and down to 290 modules after the change.
Tested-by: John David Yost <johnyost@ptd.net> # AlleyTrotter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added some more comments and cleaned up part of the the code to use
a named variable instead of one of the special $1 perl variables.
No functional changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull kconfig changes from Michal Marek:
- Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
for a bug that was exposed by this
- Fix for the script/config utility.
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/config: properly report and set string options
kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
kconfig: Add error handling to KCONFIG_ALLCONFIG
Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory. A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.
This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture. There is no point in
carrying this any further into the future.
One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Prevent subtle surprises to both people working on the kconfig code
and people using make allnoconfig allyesconfig allmoconfig and
randconfig by only attempting to read a config file if
KCONFIG_ALLCONFIG is set.
Common sense suggests attempting to read the extra config files does
not make sense unless requested. The documentation says the code
won't attempt to read the extra config files unless requested.
Current usage does not appear to include people depending on the code
reading the config files without the variable being set So do the
simple thing and stop reading config files when passed
all{no,yes,mod,def,rand}config unless KCONFIG_ALLCONFIG environment
variable is set.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
- Only try to read the file specified if KCONFIG_ALL_CONFIG is set to
something other than the empty string or "1".
- Don't use stat to check the name passed to conf_read_simple so that
zconf_fopen can find the file in the current directory or in SRCTREE
removing a extremely source of confusing failure, where KCONFIG_ALL_CONFIG
was not interpreted with respect to the directory make was called in.
- If conf_read_simple fails complain clearly and stop processing.
Allowing the simple debugging of typos.
- Clearly document the behavior so it is clear to users which
values are treated as flags and which values are treated as
filenames.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 953742c8fe.
Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something. We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide a -r option to display when fragments contain redundant
options. This is really useful when breaking apart a config into
fragments, as well as cleaning up older fragments.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Somehow the merge_config.sh script didn't get its execute bit
set when it was merged. Fix this.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Take the first config fragment and use it verbatim as the initial config
set. This avoids running the verification loop for the first file, as
nothing has actually been merged at this point. This significantly
increases performance for large config fragments.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Running `oldconfig' after any of the following configuration change:
either trivial addition, such as:
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
or more tricky change:
OLD KCONFIG | NEW KCONFIG
|
| config A
| bool "A"
|
choice | choice
prompt "Choice ?" | prompt "Choice ?"
|
config CHOICE_C | config CHOICE_C
bool "Choice C" | bool "Choice C"
|
config CHOICE_D | config CHOICE_D
bool "Choice D" | bool "Choice D"
endchoice |
| config CHOICE_E
| bool "Choice E"
| depends on A
| endchoice
will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.
Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.
Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
menuconfig: fix a regression when canceling the prompt dialog at exit
kbuild: Fix compiler warning with assertion when calling 'fwrite'
Improve update-po-config output
menuconfig: let make not report error when not save configuration
merge_config.sh: fix bug in final check
merge_config.sh: whitespace cleanup
merge_config.sh: use signal names compatible with dash and bash
kconfig: add merge_config.sh script
kconfig: use xfwrite wrapper function to silence warnings
kconfig: fix set but not used warnings
kconfig: fix warnings by specifing format arguments
This commit fixes a bug, while introducing a new one..
commit 7203ddbd4be9720649e47d756a001e0c7d7f8ae2
Author: Wang YanQing <udknight@gmail.com>
Date: Thu Jan 12 11:31:32 2012 +0800
menuconfig: let make not report error when not save configuration
Pressing ESC should cancel the yes/no dialog and return back to
the main menu, but not exit from menuconfig.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Reinhard Tartler discovered a corner case of calling xfwrite() where the
length of the string is zero.
Arnaud Lacombe suggested to use assertion for the corner case, as
fwrite(3) is currently used:
1) in comment printers. Empty comment are not allowed.
2) in a callback passed to expr_print(), where the string printed is
either NULL OR non-empty.
3) in the lexer, auto-generated, and unused.
I feel using assertion is a good solution:
1) It cleanly takes care of the above-mentioned corner case.
2) It can be easily disabled by defining NDEBUG.
3) It asserts xfwrite() is simply a wrapper for fwrite().
Reported-by: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make the V=0 output from update-po-config be aligned correctly.
Also remove an outdated comment and add a "GEN" statement.
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I find every time when I choice the 'NO' button at the dialog
which let me choice whether to save the configuration before exit
menuconfig, it always report the blow:
" GEN /mnt/sda7/home/build/test/Makefile
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
Your configuration changes were NOT saved.
make[2]: *** [menuconfig] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [sub-make] Error 2 "
This patch repair it.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Arnaud Lacombe pointed out the final checking that the requested configs
were included in the final .config was broken.
The example was that if you had a fragment that disabled
CONFIG_DECOMPRESS_GZIP applied to a normal defconfig, there would be no
final warning that CONFIG_DECOMPRESS_GZIP was acutally set in the final
.config.
This bug was introduced by me in v3 of the original patch, and the
following patch reverts the invalid change.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reported-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix whitespace usage in the clean_up routine.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The SIGHUP SIGINT and SIGTERM names caused failures when running
merge_config.sh with the dash shell. Dropping the "SIG" component makes
the script work in both bash and dash.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After noticing almost every distro has their own method of managing config
fragments, I went looking at some best practices, and wanted to try to
consolidate some of the different approaches so this fairly simple
infrastructure can be shared (and new distros/build systems don't have to
implement yet another config fragment merge script).
This script is most influenced by the Windriver tools used in the Yocto
Project, reusing some portions found there.
This script merges multiple config fragments, warning on any overridden
values. It then sets any unspecified values to their default, then
finally checks to make sure no specified value was dropped due to
unsatisfied dependencies.
I'm sure this implementation won't work for everyone, and I expect it will
need to evolve to adapt for various use cases. But I think its a
reasonable starting point.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Cc: Dmitry Fink <Dmitry.Fink@palm.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Bruce Ashfield <Bruce.Ashfield@windriver.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Thomas Lange reported that when he did a 'make localmodconfig', his
config was missing the brcmsmac driver, even though he had the module
loaded.
Looking into this, I found the file:
drivers/net/wireless/brcm80211/brcmsmac/Makefile
had the following in the Makefile:
MODULEPFX := brcmsmac
obj-$(CONFIG_BRCMSMAC) += $(MODULEPFX).o
The way streamline-config.pl works, is parsing all the
obj-$(CONFIG_FOO) += foo.o
lines to find that CONFIG_FOO belongs to the module foo.ko.
But in this case, the brcmsmac.o was not used, but a variable in its place.
By changing streamline-config.pl to remember defined variables in Makefiles
and substituting them when they are used in the obj-X lines, allows
Thomas (and others) to have their brcmsmac module stay configured
when it is loaded and running "make localmodconfig".
Reported-by: Thomas Lange <thomas-lange2@gmx.de>
Tested-by: Thomas Lange <thomas-lange2@gmx.de>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Simplify the way lines ending with backslashes (continuation) in Makefiles
is parsed. This is needed to implement a necessary fix.
Tested-by: Thomas Lange <thomas-lange2@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 5c48b108 ("um: take arch/um/sys-x86 to arch/x86/um") broke the
make target update-po-config, as its symlink trick (again) fails.
(Previous breakage was fixed with commit bdc69ca4 ("kconfig: change
update-po-config to reflect new layout of arch/um").)
The new UML layout allows to drop the symlick trick entirely. And if,
one day, another architecture supports UML too, that should now work
without again breaking this make target.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.
HOSTCC scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Remove set but not used variables to fix warnings.
HOSTCC scripts/kconfig/gconf.o
/usr/src/lto/scripts/kconfig/gconf.c: In function 'change_sym_value':
/usr/src/lto/scripts/kconfig/gconf.c:833:11: warning: variable 'oldval' set but not used [-Wunused-but-set-variable]
/usr/src/lto/scripts/kconfig/gconf.c: In function 'update_tree':
/usr/src/lto/scripts/kconfig/gconf.c:1281:19: warning: variable 'prop' set but not used [-Wunused-but-set-variable]
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Specify format arguments to fix warnings.
HOSTCC scripts/kconfig/gconf.o
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_introduction1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:686:6: warning: format not a string literal and no format arguments
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_about1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:704:6: warning: format not a string literal and no format arguments
/usr/src/lto/scripts/kconfig/gconf.c: In function 'on_license1_activate':
/usr/src/lto/scripts/kconfig/gconf.c:723:6: warning: format not a string literal and no format arguments
Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
to make it easier to locate begin/end when editing long strings;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked By: Nir Tzachar <nir.tzachar@gmail.com>
The original dialog_inputbox doesn't work with longer than prompt_width
strings, here fixed it in this way:
1) add variable cursor_form_win to record cursor of form_win,
keep its value always between [0, prompt_width-1];
reuse the original cursor_position as cursor of the string result,
use (cursor_position-cursor_form_win) as begin offset to show part of
the string in form_win;
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
To support unlimited length string config items;
No check for realloc return value keeps code simple, and to be
consistent with other existing unchecked malloc in kconfig.
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
In case KEY_BACKSPACE / KEY_DC to delete a char, it memmove only
(len-cursor_position+1) bytes;
the default case is to insert a char, it should also memmove exactly
(len-cursor_position+1) bytes;
the original use of (len+1) is wrong and may access following memory
that doesn't belong to result, may cause SegFault in theory;
case KEY_BACKSPACE:
if (cursor_position > 0) {
memmove(&result[cursor_position-1],
&result[cursor_position],
len-cursor_position+1);
cursor_position--;
}
break;
case KEY_DC:
if (cursor_position >= 0 && cursor_position < len) {
memmove(&result[cursor_position],
&result[cursor_position+1],
len-cursor_position+1);
}
break;
default:
if ((isgraph(res) || isspace(res)) &&
len-2 < result_len) {
/* insert the char at the proper position */
memmove(&result[cursor_position+1],
&result[cursor_position],
len-cursor_position+1);
result[cursor_position] = res;
cursor_position++;
}
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Acked-by: Nir Tzachar <nir.tzachar@gmail.com>
Some variables were being set but never used, which was triggering
warnings in GCC >= 4.6.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
I recently got bitten in the ass when pressing Ctrl-C and lost all my current
configuration changes. This patch captures SIGINT and allows the user to save
any changes.
Some code refactoring was made in order to handle the exit behavior.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.
Fix this by always generating these entries for named symbol.
Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
prompt "Choice"
---help---
HELP TEXT ...
config A
bool "A"
config B
bool "B"
endchoice
Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.
This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
After commit 5416857867, nohelp_text' is no
longer referenced, nuke it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The two targets `localmodconfig' and `localyesconfig' only differs from the
sed(1) ran on the result of `streamline_config.pl' to convert symbols set to
`modules' to `yes'. This conversion can be made directly from the perl script,
and thus avoid duplicating the command to generate the configuration.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The options introduced are --localmodconfig (default) and --localyesconfig.
They match the Makefile target behavior.
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
xconfig: Abort close if configuration cannot be saved
kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
kconfig/nconf: remove useless conditionnal
kconfig/nconf: prevent segfault on empty menu
kconfig/nconf: use the generic menu_get_ext_help()
nconfig: Avoid Wunused-but-set warning
kconfig/conf: mark xfgets() private
kconfig: remove pending prototypes for kconfig_load()
kconfig/conf: add command line options' description
kconfig/conf: reduce the scope of `defconfig_file'
kconfig: use calloc() for expr allocation
kconfig: introduce specialized printer
kconfig: do not overwrite symbol direct dependency in assignment
kconfig/gconf: silent missing prototype warnings
kconfig/gconf: kill deadcode
kconfig: nuke LKC_DIRECT_LINK cruft
kconfig: nuke reference to SWIG
kconfig: add missing <stdlib.h> inclusion
kconfig: add missing <ctype.h> inclusion
...
Fix up conflicts in scripts/kconfig/Makefile
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:
if (IS_ENABLED(CONFIG_NUMA))
or
#if IS_ENABLED(CONFIG_NUMA)
The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Give the user an opportunity to fix the error or save the configuration
under a different path.
Reported-by: Hiromu Yakura <hiromu1996@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.
In the same time, fix some nits in `header_print_symbol()'.
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
After the test
if (!submenu || ...)
continue;
the variable `submenu' can _not_ be NULL, so do not test for this
situation.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf does not check the validity of the current menu when help is
requested (with either <F2>, '?' or 'h'). This leads to a NULL pointer
dereference when an empty menu is encountered.
The following reduced testcase exposes the problem:
config DEP
bool
menu "FOO"
config BAR
bool "BAR"
depends on DEP
endmenu
Issue will happen when entering menu "FOO" and requesting help.
nconf is the only front-end which do not filter the validity of the
current menu. Such filter can not really happen beforehand as other key
which does not deals with the current menu might be entered by the user,
so just bails out earlier if we encounter an invalid menu.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
nconf is the only front-end which does not use this helper, but prefer
to copy/paste the code. The test wrt. menu validity added in this
version of the code is bogus anyway as an invalid menu will get
dereferenced a few line below by calling menu_get_prompt().
For now, convert nconf to use menu_get_ext_help(), as do every other
front-end. We will deals with menu validity checks properly in a
separate commit.
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Cc: Andrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
I am seeing Wunused-but-set warning while make nconfig. Looks like
active_menu is not used. Removing it fixes the warning.
Signed-off-by: Raghavendra D Prabhu <rprabhu@wnohang.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This function has not much reason to be public. In the mean time, convert
declaration from K&R C to ISO C.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Commit 5a6f8d2bd9 removed `kconfig_load()',
however, it missed an hidden prototypes in `lkc.h'. Fix this.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
This variable is not used outside of main() so there is not much reason keeping
it global. Ensure it is initialized as gcc has no way to know that normal
execution path expect only one option switch to be given on the command line
(except when we request help). As a result, we always initialize
`defconfig_file' before using it.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.
conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
Considering the following configuration:
config F
bool "F"
choice AB
bool "AB"
config A
bool "A"
config B
bool "B"
endchoice
if A
config D
bool
default y if F
select E
config E
bool "E"
endif
if B
config D
bool
default y if F
select E
config E
bool "E"
endif
The following configuration:
CONFIG_F=y
CONFIG_A=y
# CONFIG_B is not set
CONFIG_D=y
CONFIG_E=y
emits a spurious warning:
(D) selects E which has unmet direct dependencies (B)
If a symbol appears in two different branch of the tree, it should inherit the
dependency of both parent, not just the last one.
Reported-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Tested-by: Yann E. Morin <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
As the `gconf' frontend is un-maintained, go the easy way by silencing
the "warning: no previous prototype for '<fn>'" warnings.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
The only call site of renderer_toggled() has been commented out since Apr. 2003,
as per Linus' Linux history repository:
commit e7f67eb3c0570aa50c1cc0707b478a6d93bdc255
Author: Roman Zippel <zippel@linux-m68k.org>
Date: Fri Apr 4 04:18:05 2003 -0800
[PATCH] gconf update
A gconf update by Romain Li<C3><A9>vin <roms@tilp.info>
- fixed bug when double-clicking for changing value.
- expand row when enabling a row with a submenu.
- various bug fixes
As this result in a warning:
scripts/kconfig/gconf.c:891:13: warning: 'renderer_toggled' defined but not used
just nuke that code.
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Heinrich Schuchardt
Greg Kroah-Hartman
Linus Torvalds
Randy Dunlap
Borislav Petkov
Kamil Rytarowski
Nicolas Iooss
Boris Barbulovski
Ben Hutchings
Nicolas Pitre
Cheah Kok Cheong
Dirk Gouders
Paul Bolle
Benjamin Poirier
Al Viro
Jan Beulich
Chris Bainbridge
Vegard Nossum
Markus Mayer
Thiago Macieira
Michal Sojka
Michael Ellerman
Gabriel de Perthuis
Luis R. Rodriguez
Sam Bobroff
Andreas Ruprecht
Markus Elfring
Richard Weinberger
Geert Uytterhoeven
Diego Viola
Martin Walch
Michal Marek
Masahiro Yamada
Masahiro Yamada
Colin Ian King
Olof Johansson
Arjun Sreedharan
Peter Kümmel
Andrey Utkin
Bjørn Forsman
Brian Norris
Josh Triplett
Steven Rostedt (Red Hat)
Ben Hutchings
Yann E. MORIN
Kees Cook
Sedat Dilek
Arve Hjønnevåg
Li Zefan
Wengmeiling
Benjamin Poirier
John Stultz
Justin Lecher
Roland Eggner
Tiana Rakotovao Andriamahefa
Wang YanQing
Zhangfei Gao
Alan Cox
Krzysztof Mazur
Jean Delvare
Yuta Ando
Adam Lee
Dirk Gouders
Bill Pemberton
Cody Schafer
Yaakov Selkowitz
Steven Rostedt
Paul Gortmaker
Eric W. Biederman
Josh Boyer
Arnaud Lacombe
Li Zefan
Peter Foley
Darren Hart
john stultz
Cheng Renquan
Lucas De Marchi
Davidlohr Bueso
Srinivas Kandagatla
Raghavendra D Prabhu