Граф коммитов

5 Коммитов

Автор SHA1 Сообщение Дата
Alexey Khoroshilov 7c2861a6fb
spi: jcore: disable ref_clk after getting its rate
The driver does not disable ref_clk on remove.
According to the comment, the only reason to enable the clock is to get
its rate. So, it should be safe to disable clk just after that.

By the way, clk_prepare_enable() looks to be more appropriate
than clk_enable() here.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-18 17:57:42 -07:00
Takuo Koguchi 16eab16ef9
spi: jcore: disable clock when registering spi conroller failed
When probe function fails in registering the spi controller, the clock
 should remain disabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-13 19:08:24 +00:00
Javier Martinez Canillas aa12c1ab8b spi: jcore: Fix module autoload for OF registration
If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/spi/spi-jcore.ko | grep alias
alias:          platform:jcore_spi

After this patch:

$ modinfo drivers/spi/spi-jcore.ko | grep alias
alias:          platform:jcore_spi
alias:          of:N*T*Cjcore,spi2C*
alias:          of:N*T*Cjcore,spi2

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-23 16:42:20 +00:00
Wei Yongjun f75529fd71 spi: jcore: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09 10:40:05 +01:00
Rich Felker 2cb1b3b3ac spi: add driver for J-Core SPI controller
The J-Core "spi2" device is a PIO-based SPI master controller. It
differs from "bitbang" devices in that that it's clocked in hardware
rather than via soft clock modulation over gpio, and performs
byte-at-a-time transfers between the cpu and SPI controller.

This driver will be extended to support future versions of the J-Core
SPI controller with DMA transfers when they become available.

Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08 11:56:32 +01:00