This reverts commit 78155ed75f.
We're depending here on the boot time that we use to generate the
stateid being monotonic, but get_seconds() is not necessarily.
We still depend at least on boot_time being different every time, but
that is a safer bet.
We have a few reports of errors that might be explained by this problem,
though we haven't been able to confirm any of them.
But the minor gain of distinguishing expired from stale errors seems not
worth the risk.
Conflicts:
fs/nfsd/nfs4state.c
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The alloc_init_file() first adds a file to the hash and then
initializes its fi_inode, fi_id and fi_had_conflict.
The uninitialized fi_inode could thus be erroneously checked by
the find_file(), so move the hash insertion lower.
The client_mutex should prevent this race in practice; however, we
eventually hope to make less use of the client_mutex, so the ordering
here is an accident waiting to happen.
I didn't find whether the same can be true for two other fields,
but the common sense tells me it's better to initialize an object
before putting it into a global hash table :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Note the position in the version array doesn't have to match the actual
rpc version number--to me it seems clearer to maintain the distinction.
Also document choice of rpc callback version number, as discussed in
e.g. http://www.ietf.org/mail-archive/web/nfsv4/current/msg07985.html
and followups.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The /proc/fs/nfsd/versions file calls nfsd_vers() to check whether
the particular nfsd version is present/available. The problem is
that once I turn off e.g. NFSD-V4 this call returns -1 which is
true from the callers POV which is wrong.
The proposal is to report false in that case.
The bug has existed since 6658d3a7bb "[PATCH] knfsd: remove
nfsd_versbits as intermediate storage for desired versions".
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: stable@kernel.org
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a mandatory operation. Also, here (not in open) is where we
should be committing the reboot recovery information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_set_callback_client must be called under the state lock to atomically
set or unset the callback client and shutting down the previous one.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.
Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Mark the client as expired under the client_lock so it won't be renewed
when an nfsv4.1 session is done, after it was explicitly expired
during processing of the compound.
Do not renew a client mark as expired (in particular, it is not
on the lru list anymore)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently just initialize the cl_refcount to 1
and decrement in expire_client(), conditionally freeing the
client when the refcount reaches 0.
To be used later by nfsv4.1 compounds to keep the client from
timing out while in use.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Separate out unhashing of the client and session.
To be used later by the laundromat.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used later on to hold a reference count on the client while in use by a
nfsv4.1 compound.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
and grab the client lock once for all the client's sessions.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In preparation to share the lock's scope to both client
and session hash tables.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It's legal to send a DESTROY_SESSION outside any session (as the only
operation in a compound), in which case cstate->session will be NULL;
check for that case.
While we're at it, move these checks into a separate helper function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In the replay case, the
renew_client(session->se_client);
happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.
Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Benny Halevy <bhalevy@panasas.com>
When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to. So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.
We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic. Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We "goto finish" from several places where "exp" is an ERR_PTR. Also I
changed the check for "fsid_key" so that it was consistent with the check
I added.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Enforce the rules about compound op ordering.
Motivated by implementing RECLAIM_COMPLETE, for which the client is
implicit in the current session, so it is important to ensure a
succesful SEQUENCE proceeds the RECLAIM_COMPLETE.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The rfc allows a client to change the callback parameters, but we didn't
previously implement it.
Teach the callbacks to rerun themselves (by placing themselves on a
workqueue) when they recognize that their rpc task has been killed and
that the callback connection has changed.
Then we can change the callback connection by setting up a new rpc
client, modifying the nfs4 client to point at it, waiting for any work
in progress to complete, and then shutting down the old client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that the shutdown sequence guarantees callbacks are shut down before
the client is destroyed, we no longer have a use for cl_count.
We'll probably reinstate a reference count on the client some day, but
it will be held by users other than callbacks.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The NFSv4 server's fl_break callback can sleep (dropping the BKL), in
order to allocate a new rpc task to send a recall to the client.
As far as I can tell this doesn't cause any races in the current code,
but the analysis is difficult. Also, the sleep here may complicate the
move away from the BKL.
So, just schedule some work to do the job for us instead. The work will
later also prove useful for restarting a call after the callback
information is changed.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Any null probe rpc will be synchronously destroyed by the
rpc_shutdown_client() in expire_client(), so the rpc task cannot outlast
the nfs4 client. Therefore there's no need for that task to hold a
reference on the client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Once we've expired the client, there's no further purpose to the
callbacks; go ahead and shut down the callback client rather than
waiting for the last reference to go.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of allocating this small structure, just include it in the
delegation.
The nfsd4_callback structure isn't really necessary yet, but we plan to
add to it all the information necessary to perform a callback.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
This is the second attempt to fix the problem whereby a COMMIT call
causes a lease break and triggers a possible deadlock.
The problem is that nfsd attempts to break a lease on a COMMIT call.
This triggers a delegation recall if the lease is held for a delegation.
If the client is the one holding the delegation and it's the same one on
which it's issuing the COMMIT, then it can't return that delegation
until the COMMIT is complete. But, nfsd won't complete the COMMIT until
the delegation is returned. The client and server are essentially
deadlocked until the state is marked bad (due to the client not
responding on the callback channel).
The first patch attempted to deal with this by eliminating the open of
the file altogether and simply had nfsd_commit pass a NULL file pointer
to the vfs_fsync_range. That would conflict with some work in progress
by Christoph Hellwig to clean up the fsync interface, so this patch
takes a different approach.
This declares a new NFSD_MAY_NOT_BREAK_LEASE access flag that indicates
to nfsd_open that it should not break any leases when opening the file,
and has nfsd_commit set that flag on the nfsd_open call.
For now, this patch leaves nfsd_commit opening the file with write
access since I'm not clear on what sort of access would be more
appropriate.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Both the _lookup and the _update functions for these two caches
independently calculate the hash of the key.
So factor out that code for improved reuse.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The current documentation here is out of date, and not quite right.
(Future work: some user documentation would be useful.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The original code here assumed we'd allow the user to change the lease
any time, but only allow the change to take effect on restart. Since
then we modified the code to allow setting the lease on when the server
is down. Update the rest of the code to reflect that fact, clarify
variable names, and add document.
Also, the code insisted that the grace period always be the longer of
the old and new lease periods, but that's overly conservative--as long
as it lasts at least the old lease period, old clients should still know
to recover in time.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of accessing the lease time directly, some users call
nfs4_lease_time(), and some a macro, NFSD_LEASE_TIME, defined as
nfs4_lease_time(). Neither layer of indirection serves any purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd4: fix minor memory leak
svcrpc: treat uid's as unsigned
nfsd: ensure sockets are closed on error
Revert "sunrpc: move the close processing after do recvfrom method"
Revert "sunrpc: fix peername failed on closed listener"
sunrpc: remove unnecessary svc_xprt_put
NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
xfs_export_operations.commit_metadata
commit_metadata export operation replacing nfsd_sync_dir
lockd: don't clear sm_monitored on nsm_reboot_lookup
lockd: release reference to nsm_handle in nlm_host_rebooted
nfsd: Use vfs_fsync_range() in nfsd_commit
NFSD: Create PF_INET6 listener in write_ports
SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
NFSD: Support AF_INET6 in svc_addsock() function
SUNRPC: Use rpc_pton() in ip_map_parse()
nfsd: 4.1 has an rfc number
nfsd41: Create the recovery entry for the NFSv4.1 client
nfsd: use vfs_fsync for non-directories
...
We'll introduce FMODE_RANDOM which will be runtime modified. So protect
all runtime modification to f_mode with f_lock to avoid races.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.org> [2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
J. Bruce Fields
Pavel Emelyanov
Benny Halevy
Neil Brown
Dan Carpenter
Tejun Heo
Jeff Layton
Jiri Kosina
Linus Torvalds
Wu Fengguang
Christoph Hellwig
Al Viro