Граф коммитов

3315 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 0fcc3ab23d Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
 "Incremental fixes and a small feature addition on top of the main
  libnvdimm 4.12 pull request:

   - Geert noticed that tinyconfig was bloated by BLOCK selecting DAX.
     The size regression is fixed by moving all dax helpers into the
     dax-core and only specifying "select DAX" for FS_DAX and
     dax-capable drivers. He also asked for clarification of the
     NR_DEV_DAX config option which, on closer look, does not need to be
     a config option at all. Mike also throws in a DEV_DAX_PMEM fixup
     for good measure.

   - Ben's attention to detail on -stable patch submissions caught a
     case where the recent fixes to arch_copy_from_iter_pmem() missed a
     condition where we strand dirty data in the cache. This is tagged
     for -stable and will also be included in the rework of the pmem api
     to a proposed {memcpy,copy_user}_flushcache() interface for 4.13.

   - Vishal adds a feature that missed the initial pull due to pending
     review feedback. It allows the kernel to clear media errors when
     initializing a BTT (atomic sector update driver) instance on a pmem
     namespace.

   - Ross noticed that the dax_device + dax_operations conversion broke
     __dax_zero_page_range(). The nvdimm unit tests fail to check this
     path, but xfstests immediately trips over it. No excuse for missing
     this before submitting the 4.12 pull request.

  These all pass the nvdimm unit tests and an xfstests spot check. The
  set has received a build success notification from the kbuild robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  filesystem-dax: fix broken __dax_zero_page_range() conversion
  libnvdimm, btt: ensure that initializing metadata clears poison
  libnvdimm: add an atomic vs process context flag to rw_bytes
  x86, pmem: Fix cache flushing for iovec write < 8 bytes
  device-dax: kill NR_DEV_DAX
  block, dax: move "select DAX" from BLOCK to FS_DAX
  device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAX
2017-05-12 15:43:10 -07:00
Christoph Hellwig ed6565e734 block: handle partial completions for special payload requests
SCSI devices can return short writes on Write Same just like for normal
writes, so we need to handle this case for our special payload requests
as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-11 08:08:53 -06:00
Wen Xiong f36ea50ca0 blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns
"Input/output error". Looks block layer split the bio after calling
bio_integrity_prep(bio). This patch fixes the issue.

Below is how we debug this issue:
(1)format nvme to 4K block # size with type 2 DIF
(2)dd with block size bigger than 1024k.
oflag=direct
dd: error writing '/dev/nvme0n1': Input/output error

We added some debug code in nvme device driver. It showed us the first
op and the second op have the same bi and pi address. This is not
correct.

1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
	dsmgmt=0x0, AT=0x0 & RT=0x505
	Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828

2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
	AT=0x0 & RT=0x605  ==> This op fails and subsequent 5 retires..
	Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828

With the fix, It showed us both of the first op and the second op have
correct bi and pi address.

1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400,
	dsmgmt=0x0, AT=0x0 & RT=0x505
	Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual
	0x00002828
2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0,
	AT=0x0 & RT=0x605
	Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual
	0x00003028

Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 08:02:58 -06:00
Jens Axboe d373812398 blk-stat: don't use this_cpu_ptr() in a preemptable section
If PREEMPT_RCU is enabled, rcu_read_lock() isn't strong enough
for us to use this_cpu_ptr() in that section. Use the safer
get/put_cpu_ptr() variants instead.

Reported-by: Mike Galbraith <efault@gmx.de>
Fixes: 34dbad5d26 ("blk-stat: convert to callback-based statistics reporting")
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:40:18 -06:00
Jens Axboe 340ff32167 elevator: remove redundant warnings on IO scheduler switch
We warn twice for switching to a scheduler, if that switch fails.
As we also report the failure in the return value to the
sysfs write, remove the dmesg induced failures.

Keep the failure print for warning to switch to the kconfig
selected IO scheduler, as we can't report errors for that in
any other way.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:40:04 -06:00
Paolo Valente 43c1b3d6e5 block, bfq: stress that low_latency must be off to get max throughput
The introduction of the BFQ and Kyber I/O schedulers has triggered a
new wave of I/O benchmarks. Unfortunately, comments and discussions on
these benchmarks confirm that there is still little awareness that it
is very hard to achieve, at the same time, a low latency and a high
throughput. In particular, virtually all benchmarks measure
throughput, or throughput-related figures of merit, but, for BFQ, they
use the scheduler in its default configuration. This configuration is
geared, instead, toward a low latency. This is evidently a sign that
BFQ documentation is still too unclear on this important aspect. This
commit addresses this issue by stressing how BFQ configuration must be
(easily) changed if the only goal is maximum throughput.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:39:43 -06:00
Paolo Valente a66c38a171 block, bfq: use pointer entity->sched_data only if set
In the function __bfq_deactivate_entity, the pointer
entity->sched_data could happen to be used before being properly
initialized. This led to a NULL pointer dereference. This commit fixes
this bug by just using this pointer only where it is safe to do so.

Reported-by: Tom Harrison <l12436.tw@gmail.com>
Tested-by: Tom Harrison <l12436.tw@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-10 07:39:43 -06:00
Dan Williams ef51042472 block, dax: move "select DAX" from BLOCK to FS_DAX
For configurations that do not enable DAX filesystems or drivers, do not
require the DAX core to be built.

Given that the 'direct_access' method has been removed from
'block_device_operations', we can also go ahead and remove the
block-related dax helper functions from fs/block_dev.c to
drivers/dax/super.c. This keeps dax details out of the block layer and
lets the DAX core be built as a module in the FS_DAX=n case.

Filesystems need to include dax.h to call bdev_dax_supported().

Cc: linux-xfs@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-08 10:55:27 -07:00
Colin Ian King ebd7685795 blk-mq: make __blk_mq_stop_hw_queues static
Making __blk_mq_stop_hw_queues static fixes sparse warning:

  block/blk-mq.c:6: warning: symbol '__blk_mq_stop_hw_queues' was not
  declared. Should it be static?

Fixes: 2719aa217e ("blk-mq: don't use sync workqueue flushing from drivers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-08 08:09:39 -06:00
Wanpeng Li 51d638b1f5 block/mq: fix potential deadlock during cpu hotplug
This can be triggered by hot-unplug one cpu.

======================================================
 [ INFO: possible circular locking dependency detected ]
 4.11.0+ #17 Not tainted
 -------------------------------------------------------
 step_after_susp/2640 is trying to acquire lock:
  (all_q_mutex){+.+...}, at: [<ffffffffb33f95b8>] blk_mq_queue_reinit_work+0x18/0x110

 but task is already holding lock:
  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (cpu_hotplug.lock){+.+.+.}:
        lock_acquire+0x11c/0x230
        __mutex_lock+0x92/0x990
        mutex_lock_nested+0x1b/0x20
        get_online_cpus+0x64/0x80
        blk_mq_init_allocated_queue+0x3a0/0x4e0
        blk_mq_init_queue+0x3a/0x60
        loop_add+0xe5/0x280
        loop_init+0x124/0x177
        do_one_initcall+0x53/0x1c0
        kernel_init_freeable+0x1e3/0x27f
        kernel_init+0xe/0x100
        ret_from_fork+0x31/0x40

 -> #0 (all_q_mutex){+.+...}:
        __lock_acquire+0x189a/0x18a0
        lock_acquire+0x11c/0x230
        __mutex_lock+0x92/0x990
        mutex_lock_nested+0x1b/0x20
        blk_mq_queue_reinit_work+0x18/0x110
        blk_mq_queue_reinit_dead+0x1c/0x20
        cpuhp_invoke_callback+0x1f2/0x810
        cpuhp_down_callbacks+0x42/0x80
        _cpu_down+0xb2/0xe0
        freeze_secondary_cpus+0xb6/0x390
        suspend_devices_and_enter+0x3b3/0xa40
        pm_suspend+0x129/0x490
        state_store+0x82/0xf0
        kobj_attr_store+0xf/0x20
        sysfs_kf_write+0x45/0x60
        kernfs_fop_write+0x135/0x1c0
        __vfs_write+0x37/0x160
        vfs_write+0xcd/0x1d0
        SyS_write+0x58/0xc0
        do_syscall_64+0x8f/0x710
        return_from_SYSCALL_64+0x0/0x7a

 other info that might help us debug this:

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(cpu_hotplug.lock);
                                lock(all_q_mutex);
                                lock(cpu_hotplug.lock);
   lock(all_q_mutex);

  *** DEADLOCK ***

 8 locks held by step_after_susp/2640:
  #0:  (sb_writers#6){.+.+.+}, at: [<ffffffffb3244aed>] vfs_write+0x1ad/0x1d0
  #1:  (&of->mutex){+.+.+.}, at: [<ffffffffb32d3a51>] kernfs_fop_write+0x101/0x1c0
  #2:  (s_active#166){.+.+.+}, at: [<ffffffffb32d3a59>] kernfs_fop_write+0x109/0x1c0
  #3:  (pm_mutex){+.+...}, at: [<ffffffffb30d2ecd>] pm_suspend+0x21d/0x490
  #4:  (acpi_scan_lock){+.+.+.}, at: [<ffffffffb34dc3d7>] acpi_scan_lock_acquire+0x17/0x20
  #5:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffffb306d6d7>] freeze_secondary_cpus+0x27/0x390
  #6:  (cpu_hotplug.dep_map){++++++}, at: [<ffffffffb306cfd5>] cpu_hotplug_begin+0x5/0xe0
  #7:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffffb306d04f>] cpu_hotplug_begin+0x7f/0xe0

 stack backtrace:
 CPU: 3 PID: 2640 Comm: step_after_susp Not tainted 4.11.0+ #17
 Hardware name: Dell Inc. OptiPlex 7040/0JCTF8, BIOS 1.4.9 09/12/2016
 Call Trace:
  dump_stack+0x99/0xce
  print_circular_bug+0x1fa/0x270
  __lock_acquire+0x189a/0x18a0
  lock_acquire+0x11c/0x230
  ? lock_acquire+0x11c/0x230
  ? blk_mq_queue_reinit_work+0x18/0x110
  ? blk_mq_queue_reinit_work+0x18/0x110
  __mutex_lock+0x92/0x990
  ? blk_mq_queue_reinit_work+0x18/0x110
  ? kmem_cache_free+0x2cb/0x330
  ? anon_transport_class_unregister+0x20/0x20
  ? blk_mq_queue_reinit_work+0x110/0x110
  mutex_lock_nested+0x1b/0x20
  ? mutex_lock_nested+0x1b/0x20
  blk_mq_queue_reinit_work+0x18/0x110
  blk_mq_queue_reinit_dead+0x1c/0x20
  cpuhp_invoke_callback+0x1f2/0x810
  ? __flow_cache_shrink+0x160/0x160
  cpuhp_down_callbacks+0x42/0x80
  _cpu_down+0xb2/0xe0
  freeze_secondary_cpus+0xb6/0x390
  suspend_devices_and_enter+0x3b3/0xa40
  ? rcu_read_lock_sched_held+0x79/0x80
  pm_suspend+0x129/0x490
  state_store+0x82/0xf0
  kobj_attr_store+0xf/0x20
  sysfs_kf_write+0x45/0x60
  kernfs_fop_write+0x135/0x1c0
  __vfs_write+0x37/0x160
  ? rcu_read_lock_sched_held+0x79/0x80
  ? rcu_sync_lockdep_assert+0x2f/0x60
  ? __sb_start_write+0xd9/0x1c0
  ? vfs_write+0x1ad/0x1d0
  vfs_write+0xcd/0x1d0
  SyS_write+0x58/0xc0
  ? rcu_read_lock_sched_held+0x79/0x80
  do_syscall_64+0x8f/0x710
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL64_slow_path+0x25/0x25

The cpu hotplug path will hold cpu_hotplug.lock and then reinit all exiting
queues for blk mq w/ all_q_mutex, however, blk_mq_init_allocated_queue() will
contend these two locks in the inversion order. This is due to commit eabe06595d
(blk/mq: Cure cpu hotplug lock inversion), it fixes a cpu hotplug lock inversion
issue because of hotplug rework, however the hotplug rework is still work-in-progress
and lives in a -tip branch and mainline cannot yet trigger that splat. The commit
breaks the linus's tree in the merge window, so this patch reverts the lock order
and avoids to splat linus's tree.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-07 19:50:11 -06:00
Linus Torvalds 044f1daaaa Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes and updates from Jens Axboe:
 "Some fixes and followup features/changes that should go in, in this
  merge window. This contains:

   - Two fixes for lightnvm from Javier, fixing problems in the new code
     merge previously in this merge window.

   - A fix from Jan for the backing device changes, fixing an issue in
     NFS that causes a failure to mount on certain setups.

   - A change from Christoph, cleaning up the blk-mq init and exit
     request paths.

   - Remove elevator_change(), which is now unused. From Bart.

   - A fix for queue operation invocation on a dead queue, from Bart.

   - A series fixing up mtip32xx for blk-mq scheduling, removing a
     bandaid we previously had in place for this. From me.

   - A regression fix for this series, fixing a case where we wait on
     workqueue flushing from an invalid (non-blocking) context. From me.

   - A fix/optimization from Ming, ensuring that we don't both quiesce
     and freeze a queue at the same time.

   - A fix from Peter on lock ordering for CPU hotplug. Not a real
     problem right now, but will be once the CPU hotplug rework goes in.

   - A series from Omar, cleaning up out blk-mq debugfs support, and
     adding support for exporting info from schedulers in debugfs as
     well. This is really useful in debugging stalls or livelocks. From
     Omar"

* 'for-linus' of git://git.kernel.dk/linux-block: (28 commits)
  mq-deadline: add debugfs attributes
  kyber: add debugfs attributes
  blk-mq-debugfs: allow schedulers to register debugfs attributes
  blk-mq: untangle debugfs and sysfs
  blk-mq: move debugfs declarations to a separate header file
  blk-mq: Do not invoke queue operations on a dead queue
  blk-mq-debugfs: get rid of a bunch of boilerplate
  blk-mq-debugfs: rename hw queue directories from <n> to hctx<n>
  blk-mq-debugfs: don't open code strstrip()
  blk-mq-debugfs: error on long write to queue "state" file
  blk-mq-debugfs: clean up flag definitions
  blk-mq-debugfs: separate flags with |
  nfs: Fix bdi handling for cloned superblocks
  block/mq: Cure cpu hotplug lock inversion
  lightnvm: fix bad back free on error path
  lightnvm: create cmd before allocating request
  blk-mq: don't use sync workqueue flushing from drivers
  mtip32xx: convert internal commands to regular block infrastructure
  mtip32xx: cleanup internal tag assumptions
  block: don't call blk_mq_quiesce_queue() after queue is frozen
  ...
2017-05-06 11:25:08 -07:00
Linus Torvalds 53ef7d0e20 libnvdimm for 4.12
* Region media error reporting: A libnvdimm region device is the parent
 to one or more namespaces. To date, media errors have been reported via
 the "badblocks" attribute attached to pmem block devices for namespaces
 in "raw" or "memory" mode. Given that namespaces can be in "device-dax"
 or "btt-sector" mode this new interface reports media errors
 generically, i.e. independent of namespace modes or state. This
 subsequently allows userspace tooling to craft "ACPI 6.1 Section
 9.20.7.6 Function Index 4 - Clear Uncorrectable Error" requests and
 submit them via the ioctl path for NVDIMM root bus devices.
 
 * Introduce 'struct dax_device' and 'struct dax_operations': Prompted by
 a request from Linus and feedback from Christoph this allows for dax
 capable drivers to publish their own custom dax operations. This fixes
 the broken assumption that all dax operations are related to a
 persistent memory device, and makes it easier for other architectures
 and platforms to add customized persistent memory support.
 
 * 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
 available for storage appliance applications to manually trigger memory
 controllers to drain write-pending buffers that would otherwise be
 flushed automatically by the platform ADR (asynchronous-DRAM-refresh)
 mechanism at a power loss event. Support for "locked" DIMMs is included
 to prevent namespaces from surfacing when the namespace label data area
 is locked. Finally, fixes for various reported deadlocks and crashes,
 also tagged for -stable.
 
 * ACPI / nfit driver updates: General updates of the nfit driver to add
 DSM command overrides, ACPI 6.1 health state flags support, DSM payload
 debug available by default, and various fixes.
 
 Acknowledgements that came after the branch was pushed:
 
 commmit 565851c972 "device-dax: fix sysfs attribute deadlock"
 Tested-by: Yi Zhang <yizhan@redhat.com>
 
 commit 23f4984483 "libnvdimm: rework region badblocks clearing"
 Tested-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZDONJAAoJEB7SkWpmfYgC3SsP/2KrLvTUcz646ViuPOgZ2cC4
 W6wAx6cvDSt+H52kLnFEsYoFt7WAj20ggPirb/Bc5jkGlvwE0lT9Xtmso9GpVkYT
 J9ZJ9pP/4YaAD3II1gmTwaUjYi0FxoOdx3Eb92yuWkO/8ylz4b2Nu3cBpYwyziGQ
 nIfEVwDXRLE86u6x0bWuf6TlVuvsbdiAI55CDqDMVQC6xIOLbSez7b8QIHlpiKEb
 Mw+xqdQva0esoreZEOXEhWNO+qtfILx8/ceBEGTNMp4e/JjZ2FbrSNplM+9bH5k7
 ywqP8lW+mBEw0fmBBkYoVG/xyesiiBb55JLnbi8Ew+7IUxw8a3iV7wftRi62lHcK
 zAjsHe4L+MansgtZsCL8wluvIPaktAdtB4xr7l9VNLKRYRUG73jEWU0gcUNryHIL
 BkQJ52pUS1PkClyAsWbBBHl1I/CvzVPd21VW0YELmLR4OywKy1c+eKw2bcYgjrb4
 59HZSv6S6EoKaQC+2qvVNpePil7cdfg5V2ubH/ki9HoYVyoxDptEWHnvf0NNatIH
 Y7mNcOPvhOksJmnKSyHbDjtRur7WoHIlC9D7UjEFkSBWsKPjxJHoidN4SnCMRtjQ
 WKQU0seoaKj04b68Bs/Qm9NozVgnsPFIUDZeLMikLFX2Jt7YSPu+Jmi2s4re6WLh
 TmJQ3Ly9t3o3/weHSzmn
 =Ox0s
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in multiple -next releases. There were a few
  late breaking fixes and small features that got added in the last
  couple days, but the whole set has received a build success
  notification from the kbuild robot.

  Change summary:

   - Region media error reporting: A libnvdimm region device is the
     parent to one or more namespaces. To date, media errors have been
     reported via the "badblocks" attribute attached to pmem block
     devices for namespaces in "raw" or "memory" mode. Given that
     namespaces can be in "device-dax" or "btt-sector" mode this new
     interface reports media errors generically, i.e. independent of
     namespace modes or state.

     This subsequently allows userspace tooling to craft "ACPI 6.1
     Section 9.20.7.6 Function Index 4 - Clear Uncorrectable Error"
     requests and submit them via the ioctl path for NVDIMM root bus
     devices.

   - Introduce 'struct dax_device' and 'struct dax_operations': Prompted
     by a request from Linus and feedback from Christoph this allows for
     dax capable drivers to publish their own custom dax operations.
     This fixes the broken assumption that all dax operations are
     related to a persistent memory device, and makes it easier for
     other architectures and platforms to add customized persistent
     memory support.

   - 'libnvdimm' core updates: A new "deep_flush" sysfs attribute is
     available for storage appliance applications to manually trigger
     memory controllers to drain write-pending buffers that would
     otherwise be flushed automatically by the platform ADR
     (asynchronous-DRAM-refresh) mechanism at a power loss event.
     Support for "locked" DIMMs is included to prevent namespaces from
     surfacing when the namespace label data area is locked. Finally,
     fixes for various reported deadlocks and crashes, also tagged for
     -stable.

   - ACPI / nfit driver updates: General updates of the nfit driver to
     add DSM command overrides, ACPI 6.1 health state flags support, DSM
     payload debug available by default, and various fixes.

  Acknowledgements that came after the branch was pushed:

   - commmit 565851c972 "device-dax: fix sysfs attribute deadlock":
     Tested-by: Yi Zhang <yizhan@redhat.com>

   - commit 23f4984483 "libnvdimm: rework region badblocks clearing"
     Tested-by: Toshi Kani <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (52 commits)
  libnvdimm, pfn: fix 'npfns' vs section alignment
  libnvdimm: handle locked label storage areas
  libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKED
  brd: fix uninitialized use of brd->dax_dev
  block, dax: use correct format string in bdev_dax_supported
  device-dax: fix sysfs attribute deadlock
  libnvdimm: restore "libnvdimm: band aid btt vs clear poison locking"
  libnvdimm: fix nvdimm_bus_lock() vs device_lock() ordering
  libnvdimm: rework region badblocks clearing
  acpi, nfit: kill ACPI_NFIT_DEBUG
  libnvdimm: fix clear length of nvdimm_forget_poison()
  libnvdimm, pmem: fix a NULL pointer BUG in nd_pmem_notify
  libnvdimm, region: sysfs trigger for nvdimm_flush()
  libnvdimm: fix phys_addr for nvdimm_clear_poison
  x86, dax, pmem: remove indirection around memcpy_from_pmem()
  block: remove block_device_operations ->direct_access()
  block, dax: convert bdev_dax_supported() to dax_direct_access()
  filesystem-dax: convert to dax_direct_access()
  Revert "block: use DAX for partition table reads"
  ext2, ext4, xfs: retrieve dax_device for iomap operations
  ...
2017-05-05 18:49:20 -07:00
Omar Sandoval daaadb3e94 mq-deadline: add debugfs attributes
Expose the fifo lists, cached next requests, batching state, and
dispatch list. It'd also be possible to add the sorted lists, but there
aren't already seq_file helpers for rbtrees.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:25:17 -06:00
Omar Sandoval 16b738f651 kyber: add debugfs attributes
Expose the domain token pools, asynchronous sbitmap depth, domain
request lists, and batching state.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:25:17 -06:00
Omar Sandoval d332ce0918 blk-mq-debugfs: allow schedulers to register debugfs attributes
This provides the infrastructure for schedulers to expose their internal
state through debugfs. We add a list of queue attributes and a list of
hctx attributes to struct elevator_type and wire them up when switching
schedulers.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>

Add missing seq_file.h header in blk-mq-debugfs.h

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:24:40 -06:00
Omar Sandoval 9c1051aacd blk-mq: untangle debugfs and sysfs
Originally, I tied debugfs registration/unregistration together with
sysfs. There's no reason to do this, and it's getting in the way of
letting schedulers define their own debugfs attributes. Instead, tie the
debugfs registration to the lifetime of the structures themselves.

The saner lifetimes mean we can also get rid of the extra mq directory
and move everything one level up. I.e., nvme0n1/mq/hctx0/tags is now
just nvme0n1/hctx0/tags.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:24:13 -06:00
Omar Sandoval d173a25165 blk-mq: move debugfs declarations to a separate header file
Preparation for adding more declarations.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:44 -06:00
Bart Van Assche 18d4d7d057 blk-mq: Do not invoke queue operations on a dead queue
In commit e869b5462f ("blk-mq: Unregister debugfs attributes
earlier"), we shuffled the debugfs cleanup around so that the "state"
attribute was removed before we freed the blk-mq data structures.
However, later changes are going to undo that, so we need to explicitly
disallow running a dead queue.

[Omar: rebased and updated commit message]
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:39 -06:00
Omar Sandoval f57de23ac9 blk-mq-debugfs: get rid of a bunch of boilerplate
A large part of blk-mq-debugfs.c is file_operations and seq_file
boilerplate. This sucks as is but will suck even more when schedulers
can define their own debugfs entries. Factor it all out into a single
blk_mq_debugfs_fops which multiplexes as needed. We store the
request_queue, blk_mq_hw_ctx, or blk_mq_ctx in the parent directory
dentry, which is kind of hacky, but it works.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:35 -06:00
Omar Sandoval 88aabbd7e7 blk-mq-debugfs: rename hw queue directories from <n> to hctx<n>
It's not clear what these numbered directories represent unless you
consult the code. We're about to get rid of the intermediate "mq"
directory, so these would be even more confusing without that context.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:30 -06:00
Omar Sandoval 71b90511cb blk-mq-debugfs: don't open code strstrip()
Slightly more readable, plus we also strip leading spaces.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:20 -06:00
Omar Sandoval c7e4145ae1 blk-mq-debugfs: error on long write to queue "state" file
blk_queue_flags_store() currently truncates and returns a short write if
the operation being written is too long. This can give us weird results,
like here:

$ echo "run            bar"
echo: write error: invalid argument
$ dmesg
[ 1103.075435] blk_queue_flags_store: unsupported operation bar. Use either 'run' or 'start'

Instead, return an error if the user does this. While we're here, make
the argument names consistent with everywhere else in this file.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:16 -06:00
Omar Sandoval 1a435111f8 blk-mq-debugfs: clean up flag definitions
Make sure the spelled out flag names match the definition. This also
adds a missing hctx state, BLK_MQ_S_START_ON_RUN, and a missing
cmd_flag, __REQ_NOUNMAP.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:23:11 -06:00
Omar Sandoval bec03d6b92 blk-mq-debugfs: separate flags with |
This reads more naturally than spaces.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 08:22:28 -06:00
Peter Zijlstra eabe06595d block/mq: Cure cpu hotplug lock inversion
By poking at /debug/sched_features I triggered the following splat:

 [] ======================================================
 [] WARNING: possible circular locking dependency detected
 [] 4.11.0-00873-g964c8b7-dirty #694 Not tainted
 [] ------------------------------------------------------
 [] bash/2109 is trying to acquire lock:
 []  (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50
 []
 [] but task is already holding lock:
 []  (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170
 []
 [] which lock already depends on the new lock.
 []
 []
 [] the existing dependency chain (in reverse order) is:
 []
 [] -> #2 (&sb->s_type->i_mutex_key#4){+++++.}:
 []        lock_acquire+0x100/0x210
 []        down_write+0x28/0x60
 []        start_creating+0x5e/0xf0
 []        debugfs_create_dir+0x13/0x110
 []        blk_mq_debugfs_register+0x21/0x70
 []        blk_mq_register_dev+0x64/0xd0
 []        blk_register_queue+0x6a/0x170
 []        device_add_disk+0x22d/0x440
 []        loop_add+0x1f3/0x280
 []        loop_init+0x104/0x142
 []        do_one_initcall+0x43/0x180
 []        kernel_init_freeable+0x1de/0x266
 []        kernel_init+0xe/0x100
 []        ret_from_fork+0x31/0x40
 []
 [] -> #1 (all_q_mutex){+.+.+.}:
 []        lock_acquire+0x100/0x210
 []        __mutex_lock+0x6c/0x960
 []        mutex_lock_nested+0x1b/0x20
 []        blk_mq_init_allocated_queue+0x37c/0x4e0
 []        blk_mq_init_queue+0x3a/0x60
 []        loop_add+0xe5/0x280
 []        loop_init+0x104/0x142
 []        do_one_initcall+0x43/0x180
 []        kernel_init_freeable+0x1de/0x266
 []        kernel_init+0xe/0x100
 []        ret_from_fork+0x31/0x40

 []  *** DEADLOCK ***
 []
 [] 3 locks held by bash/2109:
 []  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0
 []  #1:  (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0
 []  #2:  (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170
 []
 [] stack backtrace:
 [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty #694
 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013
 [] Call Trace:

 []  lock_acquire+0x100/0x210
 []  get_online_cpus+0x2a/0x90
 []  static_key_slow_dec+0x1b/0x50
 []  static_key_disable+0x20/0x30
 []  sched_feat_write+0x131/0x170
 []  full_proxy_write+0x97/0xd0
 []  __vfs_write+0x28/0x120
 []  vfs_write+0xb5/0x1a0
 []  SyS_write+0x49/0xa0
 []  entry_SYSCALL_64_fastpath+0x23/0xc2

This is because of the cpu hotplug lock rework. Break the chain at #1
by reversing the lock acquisition order. This way i_mutex_key#4 no
longer depends on cpu_hotplug_lock and things are good.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-04 07:57:13 -06:00
Jens Axboe 2719aa217e blk-mq: don't use sync workqueue flushing from drivers
A previous commit introduced the sync flush, which we need from
internal callers like blk_mq_quiesce_queue(). However, we also
call the stop helpers from drivers, particularly from ->queue_rq()
when we have to stop processing for a bit. We can't block from
those locations, and we don't have to guarantee that we're
fully flushed.

Fixes: 9f99373790 ("blk-mq: unify hctx delayed_run_work and run_work")
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-03 11:44:43 -06:00
Linus Torvalds e5021876c9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD updates from Shaohua Li:

 - Add Partial Parity Log (ppl) feature found in Intel IMSM raid array
   by Artur Paszkiewicz. This feature is another way to close RAID5
   writehole. The Linux implementation is also available for normal
   RAID5 array if specific superblock bit is set.

 - A number of md-cluser fixes and enabling md-cluster array resize from
   Guoqing Jiang

 - A bunch of patches from Ming Lei and Neil Brown to rewrite MD bio
   handling related code. Now MD doesn't directly access bio bvec,
   bi_phys_segments and uses modern bio API for bio split.

 - Improve RAID5 IO pattern to improve performance for hard disk based
   RAID5/6 from me.

 - Several patches from Song Liu to speed up raid5-cache recovery and
   allow raid5 cache feature disabling in runtime.

 - Fix a performance regression in raid1 resync from Xiao Ni.

 - Other cleanup and fixes from various people.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (84 commits)
  md/raid10: skip spare disk as 'first' disk
  md/raid1: Use a new variable to count flighting sync requests
  md: clear WantReplacement once disk is removed
  md/raid1/10: remove unused queue
  md: handle read-only member devices better.
  md/raid10: wait up frozen array in handle_write_completed
  uapi: fix linux/raid/md_p.h userspace compilation error
  md-cluster: Fix a memleak in an error handling path
  md: support disabling of create-on-open semantics.
  md: allow creation of mdNNN arrays via md_mod/parameters/new_array
  raid5-ppl: use a single mempool for ppl_io_unit and header_page
  md/raid0: fix up bio splitting.
  md/linear: improve bio splitting.
  md/raid5: make chunk_aligned_read() split bios more cleanly.
  md/raid10: simplify handle_read_error()
  md/raid10: simplify the splitting of requests.
  md/raid1: factor out flush_bio_list()
  md/raid1: simplify handle_read_error().
  Revert "block: introduce bio_copy_data_partial"
  md/raid1: simplify alloc_behind_master_bio()
  ...
2017-05-03 10:05:38 -07:00
Ming Lei 7a148c2fcf block: don't call blk_mq_quiesce_queue() after queue is frozen
After queue is frozen, no request in this queue can be in use at all, so
there can't be any .queue_rq() running on this queue.  It isn't
necessary to call blk_mq_quiesce_queue() any more, so remove it in both
elevator_switch_mq() and blk_mq_update_nr_requests().

Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Fixed up the description a bit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02 11:33:08 -06:00
Linus Torvalds c58d4055c0 A reasonably busy cycle for documentation this time around. There is a new
guide for user-space API documents, rather sparsely populated at the
 moment, but it's a start.  Markus improved the infrastructure for
 converting diagrams.  Mauro has converted much of the USB documentation
 over to RST.  Plus the usual set of fixes, improvements, and tweaks.
 
 There's a bit more than the usual amount of reaching out of Documentation/
 to fix comments elsewhere in the tree; I have acks for those where I could
 get them.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZB1elAAoJEI3ONVYwIuV6wUIQAJSM/4rNdj6z+GXeWhRfbsOo
 vqqVYluvXQIJaaqdsy9dgcfThhOXWYsPyVF6Xd+bDJpwF3BMZYbX1CI1Mo3kRD+7
 9+Pf68cYSHRoU3l/sFI8q0zfKbHtmFteIvnRQoFtRaExqgTR8glUfxNDyN9XuNAZ
 3naS4qMZivM4gjMcSpIB/wFOQpV+6qVIs6VTFLdCC8wodT3W/Wmb+bqrCVJ0twbB
 t8jJeYHt2wsiTdqrKU+VilAUAZ1Lby+DNfeWrO18rC1ohktPyUzOGg8JmTKUBpVO
 qj1OJwD6abuaNh/J9bXsh8u0OrVrBKWjVrhq9IFYDlm92fu3Bgr6YeoaVPEpcklt
 jdlgZnWs9/oXa6d32aMc9F7mP9a0Q1qikFTYINhaHQZCb4VDRuQ9hCSuqWm5jlVy
 lmVAoxLa0zSdOoXaYuO3HC99ku1cIn814CXMDz/IwKXkqUCV+zl+H3AGkvxGyQ5M
 eblw2TnQnc6e1LRcxt5bgpFR1JYMbCJhu0U5XrNFueQV8ReB15dvL7h4y21dWJKF
 2Sr83rwfG1rpZQiSqCjOXxIzuXbEGH3+a+zCDV5IHhQRt/VNDOt2hgmcyucSSJ5h
 5GRFYgTlGvoT/6LdIT39QooHB+4tSDRtEQ6lh0q2ZtVV2rfG/I6/PR5sUbWM65SN
 vAfctRm2afHLhdonSX5O
 =41m+
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.12' of git://git.lwn.net/linux

Pull documentation update from Jonathan Corbet:
 "A reasonably busy cycle for documentation this time around. There is a
  new guide for user-space API documents, rather sparsely populated at
  the moment, but it's a start. Markus improved the infrastructure for
  converting diagrams. Mauro has converted much of the USB documentation
  over to RST. Plus the usual set of fixes, improvements, and tweaks.

  There's a bit more than the usual amount of reaching out of
  Documentation/ to fix comments elsewhere in the tree; I have acks for
  those where I could get them"

* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
  docs: Fix a couple typos
  docs: Fix a spelling error in vfio-mediated-device.txt
  docs: Fix a spelling error in ioctl-number.txt
  MAINTAINERS: update file entry for HSI subsystem
  Documentation: allow installing man pages to a user defined directory
  Doc/PM: Sync with intel_powerclamp code behavior
  zr364xx.rst: usb/devices is now at /sys/kernel/debug/
  usb.rst: move documentation from proc_usb_info.txt to USB ReST book
  convert philips.txt to ReST and add to media docs
  docs-rst: usb: update old usbfs-related documentation
  arm: Documentation: update a path name
  docs: process/4.Coding.rst: Fix a couple of document refs
  docs-rst: fix usb cross-references
  usb: gadget.h: be consistent at kernel doc macros
  usb: composite.h: fix two warnings when building docs
  usb: get rid of some ReST doc build errors
  usb.rst: get rid of some Sphinx errors
  usb/URB.txt: convert to ReST and update it
  usb/persist.txt: convert to ReST and add to driver-api book
  usb/hotplug.txt: convert to ReST and add to driver-api book
  ...
2017-05-02 10:21:17 -07:00
Christoph Hellwig d6296d39e9 blk-mq: update ->init_request and ->exit_request prototypes
Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq.  Except for a superflous check in
mtip32xx it was unused anyway.

Also pass the tag_set instead of just the driver data - this allows drivers
to avoid some code duplication in a follow on cleanup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02 07:52:08 -06:00
Jens Axboe 9f2779bff2 blk-mq-sched: remove hack that bypasses scheduler for reserved requests
We have update the troublesome driver (mtip32xx) to deal with this
appropriately. So kill the hack that bypassed scheduler allocation
and insertion for reserved requests.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02 07:52:08 -06:00
Bart Van Assche c033269490 block: Remove elevator_change()
Since commit 8425339492 ("remove the mg_disk driver") removed the
only caller of elevator_change(), also remove the elevator_change()
function itself.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-02 07:52:08 -06:00
Linus Torvalds 5db6db0d40 Merge branch 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess unification updates from Al Viro:
 "This is the uaccess unification pile. It's _not_ the end of uaccess
  work, but the next batch of that will go into the next cycle. This one
  mostly takes copy_from_user() and friends out of arch/* and gets the
  zero-padding behaviour in sync for all architectures.

  Dealing with the nocache/writethrough mess is for the next cycle;
  fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
  sold on access_ok() in there, BTW; just not in this pile), same for
  reducing __copy_... callsites, strn*... stuff, etc. - there will be a
  pile about as large as this one in the next merge window.

  This one sat in -next for weeks. -3KLoC"

* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
  HAVE_ARCH_HARDENED_USERCOPY is unconditional now
  CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
  m32r: switch to RAW_COPY_USER
  hexagon: switch to RAW_COPY_USER
  microblaze: switch to RAW_COPY_USER
  get rid of padding, switch to RAW_COPY_USER
  ia64: get rid of copy_in_user()
  ia64: sanitize __access_ok()
  ia64: get rid of 'segment' argument of __do_{get,put}_user()
  ia64: get rid of 'segment' argument of __{get,put}_user_check()
  ia64: add extable.h
  powerpc: get rid of zeroing, switch to RAW_COPY_USER
  esas2r: don't open-code memdup_user()
  alpha: fix stack smashing in old_adjtimex(2)
  don't open-code kernel_setsockopt()
  mips: switch to RAW_COPY_USER
  mips: get rid of tail-zeroing in primitives
  mips: make copy_from_user() zero tail explicitly
  mips: clean and reorder the forest of macros...
  mips: consolidate __invoke_... wrappers
  ...
2017-05-01 14:41:04 -07:00
Shaohua Li e265eb3a30 Merge branch 'md-next' into md-linus 2017-05-01 14:09:21 -07:00
Linus Torvalds 694752922b Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..
2017-05-01 10:39:57 -07:00
Dan Williams 9438b3e080 block: hide badblocks attribute by default
Commit 99e6608c9e "block: Add badblock management for gendisks"
allowed for drivers like pmem and software-raid to advertise a list of
bad media areas. However, it inadvertently added a 'badblocks' to all
block devices. Lets clean this up by having the 'badblocks' attribute
not be visible when the driver has not populated a 'struct badblocks'
instance in the gendisk.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28 08:26:42 -06:00
Jens Axboe 21c6e939a9 blk-mq: unify hctx delay_work and run_work
The only difference between ->run_work and ->delay_work, is that
the latter is used to defer running a queue. This is done by
marking the queue stopped, and scheduling ->delay_work to run
sometime in the future. While the queue is stopped, direct runs
or runs through ->run_work will not run the queue.

If we combine the handlers, then we need to handle two things:

1) If a delayed/stopped run is scheduled, then we should not run
   the queue before that has been completed.
2) If a queue is delayed/stopped, the handler needs to restart
   the queue. Normally a run of a queue with the stopped bit set
   would be a no-op.

Case 1 is handled by modifying a currently pending queue run
to the deadline set by the caller of blk_mq_delay_queue().
Subsequent attempts to queue a queue run will find the work
item already pending, and direct runs will see a stopped queue
as before.

Case 2 is handled by adding a new bit, BLK_MQ_S_START_ON_RUN,
that tells the work handler that it should clear a stopped
queue and run the handler.

Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28 08:11:43 -06:00
Jens Axboe 818cd1cbaa block: add kblock_mod_delayed_work_on()
This modifies (or adds, if not currently pending) an existing
delayed work item.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28 08:10:15 -06:00
Jens Axboe 9f99373790 blk-mq: unify hctx delayed_run_work and run_work
They serve the exact same purpose. Get rid of the non-delayed
work variant, and just run it without delay for the normal case.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-28 08:10:15 -06:00
Jens Axboe 339318080b blk-mq-sched: alloate reserved tags out of normal pool
At least one driver, mtip32xx, has a hard coded dependency on
the value of the reserved tag used for internal commands. While
that should really be fixed up, for now let's ensure that we just
bypass the scheduler tags an allocation marked as reserved. They
are used for house keeping or error handling, so we can safely
ignore them in the scheduler.

Tested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-27 07:45:46 -06:00
Bart Van Assche 2836ee4b1a blk-mq: Add blk_mq_ops.show_rq()
This new callback function will be used in the next patch to show
more information about SCSI requests.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche 8658dca8bd blk-mq: Show operation, cmd_flags and rq_flags names
Show the operation name, .cmd_flags and .rq_flags as names instead
of numbers.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche fd07dc8185 blk-mq: Make blk_flags_show() callers append a newline character
This patch does not change any functionality but makes it possible
to produce a single line of output with multiple flag-to-name
translations.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche 65ca1ca32c blk-mq: Move the "state" debugfs attribute one level down
Move the "state" attribute from the top level to the "mq" directory
as requested by Omar.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche e869b5462f blk-mq: Unregister debugfs attributes earlier
We currently call blk_mq_free_queue() from blk_cleanup_queue()
before we unregister the debugfs attributes for that queue in
blk_release_queue(). This leaves a window open during which
accessing most of the mq debugfs attributes would cause a
use-after-free. Additionally, the "state" attribute allows
running the queue, which we should not do after the queue has
entered the "dead" state. Fix both cases by unregistering the
debugfs attributes before freeing queue resources starts.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche f05d1ba787 blk-mq: Only unregister hctxs for which registration succeeded
Hctx unregistration involves calling kobject_del(). kobject_del()
must not be called if kobject_add() has not been called. Hence in
the error path only unregister hctxs for which registration succeeded.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche 62d6c9496a blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
Since the blk_mq_debugfs_*register_hctxs() functions register and
unregister all attributes under the "mq" directory, rename these
into blk_mq_debugfs_*register_mq().

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche 4c9e4019f1 blk-mq: Let blk_mq_debugfs_register() look up the queue name
A later patch will move the call of blk_mq_debugfs_register() to
a function to which the queue name is not passed as an argument.
To avoid having to add a 'name' argument to multiple callers, let
blk_mq_debugfs_register() look up the queue name.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Bart Van Assche 2d0364c8c1 blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
A later patch in this series will modify blk_mq_debugfs_register()
such that it uses q->kobj.parent to determine the name of a
request queue. Hence make sure that that pointer is initialized
before blk_mq_debugfs_register() is called. To avoid lock inversion,
protect sysfs / debugfs registration with the queue sysfs_lock
instead of the global mutex all_q_mutex.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26 15:09:04 -06:00
Dan Williams a41fe02b6b Revert "block: use DAX for partition table reads"
commit d1a5f2b4d8 ("block: use DAX for partition table reads") was
part of a stalled effort to allow dax mappings of block devices. Since
then the device-dax mechanism has filled the role of dax-mapping static
device ranges.

Now that we are moving ->direct_access() from a block_device operation
to a dax_inode operation we would need block devices to map and carry
their own dax_inode reference.

Unless / until we decide to revive dax mapping of raw block devices
through the dax_inode scheme, there is no need to carry
read_dax_sector(). Its removal in turn allows for the removal of
bdev_direct_access() and should have been included in commit
2237570168 ("block_dev: remove DAX leftovers").

Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-25 13:20:46 -07:00