Fail journal creation if __getblk() returns NULL. unlikely() is
added because it is called in a loop and we've been OK without
the check until now.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Convert set/clear_bit(BH_JWrite, ...) to set/clear_buffer_jwrite()
for consistency.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during unmount
when the underlying block device is removed. This bug has been seen on System
Z when removing all paths from a multipath-backed ext3 mount; on System P when
injecting enough PCI EEH errors to make the SCSI controller go offline; and
similar warnings have been seen (and patched) with ext2/ext4.
The super block update from a previous operation has marked the buffer as in
error, and the flag has to be cleared before doing the update. Similar changes
have been made to ext4 by commit 914258bf2c.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Remove goto statement which jumps to very next line. Also remove
target label because it is no longer used anywhere.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Move call to jbd_debug() into #ifdef CONFIG_JBD_DEBUG block because
'dropped' is declared there. The code could be compiled without this
change anyway, simply because jbd_debug() expands to nothing if
!CONFIG_JBD_DEBUG but IMHO it doesn't look good in general.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.
Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.
This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
tree.
Having the queue associated to the fsync-ing process and the one associated
to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
after the noidle tree expires its slice.
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the
EOPNOTSUPP detection for barriers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.
Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers. Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.
In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
log_start_commit() returns 1 only when it started a transaction
commit. Thus in case transaction commit is already running, we
fail to wait for the commit to finish. Fix the issue by always
waiting for the commit regardless of the log_start_commit return
value.
Signed-off-by: Jan Kara <jack@suse.cz>
Provide a function which returns whether a transaction with given tid
will send a barrier to the filesystem device. The function will be used
by ext3 to detect whether fsync needs to send a separate barrier or not.
Signed-off-by: Jan Kara <jack@suse.cz>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Delay discarding buffers in journal_unmap_buffer until
we know that "add to orphan" operation has definitely been
committed, otherwise the log space of committing transation
may be freed and reused before truncate get committed, updates
may get lost if crash happens.
This patch is a backport of JBD2 fix by dingdinghua <dingdinghua@nrchpc.ac.cn>.
Signed-off-by: Jan Kara <jack@suse.cz>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.
Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
This reverts commit e4c570c4cb, as
requested by Alexey:
"I think I gave a good enough arguments to not merge it.
To iterate:
* patch makes impossible to start using ext3 on EXT3_FS=n kernels
without reboot.
* this is done only for one pointer on task_struct"
None of config options which define task_struct are tristate directly
or effectively."
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
journal_info in task_struct is used in journaling file system only. So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If journal init fails, we need to free j_wbuf.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
lockdep annotation for a transaction start has been at the end of
journal_start(). But a transaction is also started from journal_restart(). Move
the lockdep annotation to start_this_handle() which covers both cases.
Signed-off-by: Jan Kara <jack@suse.cz>
It does not make sense to store block number for journal as unsigned long
since they can be only 32-bit (because of on-disk format limitation). So
change in-memory structures and variables to use unsigned int instead.
Signed-off-by: Jan Kara <jack@suse.cz>
Fix jiffie rounding in jbd commit timer setup code. Rounding down could cause
the timer to be fired before the corresponding transaction has expired. That
transaction can stay not committed forever if no new transaction is created or
explicit sync/umount happens.
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The function journal_write_metadata_buffer() calls jbd_unlock_bh_state(bh_in)
too early; this could potentially allow another thread to call get_write_access
on the buffer head, modify the data, and dirty it, and allowing the wrong data
to be written into the journal. Fortunately, if we lose this race, the only
time this will actually cause filesystem corruption is if there is a system
crash or other unclean shutdown of the system before the next commit can take
place.
Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
The following race can happen:
CPU1 CPU2
checkpointing code checks the buffer, adds
it to an array for writeback
do_get_write_access()
...
lock_buffer()
unlock_buffer()
flush_batch() submits the buffer for IO
__jbd_journal_file_buffer()
So a buffer under writeout is returned from do_get_write_access(). Since
the filesystem code relies on the fact that journaled buffers cannot be
written out, it does not take the buffer lock and so it can modify buffer
while it is under writeout. That can lead to a filesystem corruption
if we crash at the right moment. The similar problem can happen with
the journal_get_create_access() path.
We fix the problem by clearing the buffer dirty bit under buffer_lock
even if the buffer is on BJ_None list. Actually, we clear the dirty bit
regardless the list the buffer is in and warn about the fact if
the buffer is already journalled.
Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>.
Reported-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
I delete the following patch
"commit 3f31fddfa2
Author: Mingming Cao <cmm@us.ibm.com>
Date: Fri Jul 25 01:46:22 2008 -0700
jbd: fix race between free buffer and commit transaction
This patch is no longer needed because if race between freeing buffer and
committing transaction functionality occurs and dio gets error, currently
dio falls back to buffered IO by the following patch.
commit 6ccfa806a9
Author: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Date: Tue Sep 2 14:35:40 2008 -0700
VFS: fix dio write returning EIO when try_to_release_page fails
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit code, we scan buffers attached to a transaction. During this
scan, we sometimes have to drop j_list_lock and then we recheck whether
the journal buffer head didn't get freed by journal_try_to_free_buffers().
But checking for buffer_jbd(bh) isn't enough because a new journal head
could get attached to our buffer head. So add a check whether the journal
head remained the same and whether it's still at the same transaction and
list.
This is a nasty bug and can cause problems like memory corruption (use after
free) or trigger various assertions in JBD code (observed).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <stable@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix potential inode allocation soft lockup in Orlov allocator
ext4: Make the extent validity check more paranoid
jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records
jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
ext4: really print the find_group_flex fallback warning only once
The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Update information about locking in JBD revoke code.
Reported-by: Lin Tan <tammy000@gmail.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext3: Add replace-on-rename hueristics for data=writeback mode
ext3: Add replace-on-truncate hueristics for data=writeback mode
ext3: Use WRITE_SYNC for commits which are caused by fsync()
block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
On 32-bit system with CONFIG_LBD getblk can fail because provided block
number is too big. Make JBD gracefully handle that.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <dmaciejak@fortinet.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a commit is triggered by fsync(), set a flag indicating the journal
blocks associated with the transaction should be flushed out using
WRITE_SYNC.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
journal_start_commit() returns 1 if either a transaction is committing or
the function has queued a transaction commit. But it returns 0 if we
raced with somebody queueing the transaction commit as well. This
resulted in ext3_sync_fs() not functioning correctly (description from
Arthur Jones): In the case of a data=ordered umount with pending long
symlinks which are delayed due to a long list of other I/O on the backing
block device, this causes the buffer associated with the long symlinks to
not be moved to the inode dirty list in the second phase of fsync_super.
Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT
flag and the dirty pages are never written to the backing block device,
causing long symlink corruption and exposing new or previously freed block
data to userspace.
This can be reproduced with a script created by Eric Sandeen
<sandeen@redhat.com>:
#!/bin/bash
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
rm -f /mnt/test2/*
dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512
touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
/mnt/test2/link
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
ls /mnt/test2/
This patch fixes journal_start_commit() to always return 1 when there's
a transaction committing or queued for commit.
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Mike Snitzer <snitzer@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove excess kernel-doc from fs/jbd/transaction.c:
Warning(linux-2.6.28-git5//fs/jbd/transaction.c:764): Excess function parameter 'credits' description in 'journal_get_write_access'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a flaw with the way jbd handles fsync batching. If we fsync() a
file and we were not the last person to run fsync() on this fs then we
automatically sleep for 1 jiffie in order to wait for new writers to join
into the transaction before forcing the commit. The problem with this is
that with really fast storage (ie a Clariion) the time it takes to commit
a transaction to disk is way faster than 1 jiffie in most cases, so
sleeping means waiting longer with nothing to do than if we just committed
the transaction and kept going. Ric Wheeler noticed this when using
fs_mark with more than 1 thread, the throughput would plummet as he added
more threads.
This patch attempts to fix this problem by recording the average time in
nanoseconds that it takes to commit a transaction to disk, and what time
we started the transaction. If we run an fsync() and we have been running
for less time than it takes to commit the transaction to disk, we sleep
for the delta amount of time and then commit to disk. We acheive
sub-jiffie sleeping using schedule_hrtimeout. This means that the wait
time is auto-tuned to the speed of the underlying disk, instead of having
this static timeout. I weighted the average according to somebody's
comments (Andreas Dilger I think) in order to help normalize random
outliers where we take way longer or way less time to commit than the
average. I also have a min() check in there to make sure we don't sleep
longer than a jiffie in case our storage is super slow, this was requested
by Andrew.
I unfortunately do not have access to a Clariion, so I had to use a
ramdisk to represent a super fast array. I tested with a SATA drive with
barrier=1 to make sure there was no regression with local disks, I tested
with a 4 way multipathed Apple Xserve RAID array and of course the
ramdisk. I ran the following command
fs_mark -d /mnt/ext3-test -s 4096 -n 2000 -D 64 -t $i
where $i was 2, 4, 8, 16 and 32. I mkfs'ed the fs each time. Here are my
results
type threads with patch without patch
sata 2 24.6 26.3
sata 4 49.2 48.1
sata 8 70.1 67.0
sata 16 104.0 94.1
sata 32 153.6 142.7
xserve 2 246.4 222.0
xserve 4 480.0 440.8
xserve 8 829.5 730.8
xserve 16 1172.7 1026.9
xserve 32 1816.3 1650.5
ramdisk 2 2538.3 1745.6
ramdisk 4 2942.3 661.9
ramdisk 8 2882.5 999.8
ramdisk 16 2738.7 1801.9
ramdisk 32 2541.9 2394.0
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ric Wheeler <rwheeler@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit be07c4ed introducd a regression because it assumed that if
there were no transactions ready to be checkpointed, that no progress
could be made on making space available in the journal, and so the
journal should be aborted. This assumption is false; it could be the
case that simply calling cleanup_journal_tail() will recover the
necessary space, or, for small journals, the currently committing
transaction could be responsible for chewing up the required space in
the log, so we need to wait for the currently committing transaction
to finish before trying to force a checkpoint operation.
This patch fixes the bug reported by Meelis Roos at:
http://bugzilla.kernel.org/show_bug.cgi?id=11937
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Duane Griffin <duaneg@dghda.com>
Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Delete excess kernel-doc notation in fs/ subdirectory:
Warning(linux-2.6.27-git10//fs/jbd/transaction.c:886): Excess function parameter or struct member 'credits' description in 'journal_get_undo_access'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The __log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g. because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.
Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.
This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Tested-by: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__try_to_free_cp_buf(), __process_buffer(), and __wait_cp_io() test
BH_Uptodate flag to detect write I/O errors on metadata buffers. But by
commit 95450f5a7e "ext3: don't read inode
block if the buffer has a write error"(*), BH_Uptodate flag can be set to
inode buffers with BH_Write_EIO in order to avoid reading old inode data.
So now, we have to test BH_Write_EIO flag of checkpointing inode buffers
instead of BH_Uptodate. This patch does it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a checkpointing IO fails, current JBD code doesn't check the error
and continue journaling. This means latest metadata can be lost from both
the journal and filesystem.
This patch leaves the failed metadata blocks in the journal space and
aborts journaling in the case of log_do_checkpoint(). To achieve this, we
need to do:
1. don't remove the failed buffer from the checkpoint list where in
the case of __try_to_free_cp_buf() because it may be released or
overwritten by a later transaction
2. log_do_checkpoint() is the last chance, remove the failed buffer
from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
prevent the journaled contents from being cleaned. For safety,
don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext3 layer so
that ext3 don't clear the needs_recovery flag, otherwise the
journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent cleanup_journal_tail() from being called between
__journal_drop_transaction() and journal_abort() (a race issue
between journal_flush() and __log_wait_for_space()
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use fs/*/Kconfig more, which is good because everything related to one
filesystem is in one place and fs/Kconfig is quite fat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ordered mode, if a file data buffer being dirtied exists in the
committing transaction, we write the buffer to the disk, move it from the
committing transaction to the running transaction, then dirty it. But we
don't have to remove the buffer from the committing transaction when the
buffer couldn't be written out, otherwise it would miss the error and the
committing transaction would not abort.
This patch adds an error check before removing the buffer from the
committing transaction.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the journal doesn't abort when it gets an IO error in file data blocks,
the file data corruption will spread silently. Because most of
applications and commands do buffered writes without fsync(), they don't
notice the IO error. It's scary for mission critical systems. On the
other hand, if the journal aborts whenever it gets an IO error in file
data blocks, the system will easily become inoperable. So this patch
introduces a filesystem option to determine whether it aborts the journal
or just call printk() when it gets an IO error in file data.
If you mount a ext3 fs with data_err=abort option, it aborts on file data
write error. If you mount it with data_err=ignore, it doesn't abort, just
call printk(). data_err=ignore is the default.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, original metadata buffers are dirtied when they are unfiled
whether the journal has aborted or not. Eventually these buffers will be
written-back to the filesystem by pdflush. This means some metadata
buffers are written to the filesystem without journaling if the journal
aborts. So if both journal abort and system crash happen at the same
time, the filesystem would become inconsistent state. Additionally,
replaying journaled metadata can overwrite the latest metadata on the
filesystem partly. Because, if the journal aborts, journaled metadata are
preserved and replayed during the next mount not to lose uncheckpointed
metadata. This would also break the consistency of the filesystem.
This patch prevents original metadata buffers from being dirtied on abort
by clearing BH_JBDDirty flag from those buffers. Thus, no metadata
buffers are written to the filesystem without journaling.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we failed to write metadata buffers to the journal space and succeeded
to write the commit record, stale data can be written back to the
filesystem as metadata in the recovery phase.
To avoid this, when we failed to write out metadata buffers, abort the
journal before writing the commit record.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
the names were too generic:
drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Like the page lock change, this also requires name change, so convert the
raw test_and_set bitop to a trylock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).
This also facilitates lockdeping of page lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ordered mode, the current jbd aborts the journal if a file data buffer
has an error. But this behavior is unintended, and we found that it has
been adopted accidentally.
This patch undoes it and just calls printk() instead of aborting the
journal. Additionally, set AS_EIO into the address_space object of the
failed buffer which is submitted by journal_do_submit_data() so that
fsync() can get -EIO.
Missing error checkings are also added to inform errors on file data
buffers to the user. The following buffers are targeted.
(a) the buffer which has already been written out by pdflush
(b) the buffer which has been unlocked before scanned in the
t_locked_list loop
[akpm@linux-foundation.org: improve grammar in a printk]
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After ext3-ordered files are truncated, there is a possibility that the
pages which cannot be estimated still remain. Remaining pages can be
released when the system has really few memory. So, it is not memory
leakage. But the resource management software etc. may not work
correctly.
It is possible that journal_unmap_buffer() cannot release the buffers, and
the pages to which they belong because they are attached to a commiting
transaction and journal_unmap_buffer() cannot release them. To release
such the buffers and the pages later, journal_unmap_buffer() leaves it to
journal_commit_transaction(). (journal_unmap_buffer() puts the mark
'BH_Freed' to the buffers so that journal_commit_transaction() can
identify whether they can be released or not.)
In the journalled mode and the writeback mode, jbd does with only metadata
buffers. But in the ordered mode, jbd does with metadata buffers and also
data buffers.
Actually, journal_commit_transaction() releases only the metadata buffers
of which release is demanded by journal_unmap_buffer(), and also releases
the pages to which they belong if possible.
As a result, the data buffers of which release is demanded by
journal_unmap_buffer() remain after a transaction commits. And also the
pages to which they belong remain.
Such the remained pages don't have mapping any longer. Due to this fact,
there is a possibility that the pages which cannot be estimated remain.
The metadata buffers marked 'BH_Freed' and the pages to which
they belong can be released at 'JBD: commit phase 7'.
Therefore, by applying the same code into 'JBD: commit phase 2' (where the
data buffers are done with), journal_commit_transaction() can also release
the data buffers marked 'BH_Freed' and the pages to which they belong.
As a result, all the buffers marked 'BH_Freed' can be released, and also
all the pages to which these buffers belong can be released at
journal_commit_transaction(). So, the page which cannot be estimated is
lost.
<<Excerpt of code at 'JBD: commit phase 7'>>
> spin_lock(&journal->j_list_lock);
> while (commit_transaction->t_forget) {
> transaction_t *cp_transaction;
> struct buffer_head *bh;
>
> jh = commit_transaction->t_forget;
>...
> if (buffer_freed(bh)) {
> ^^^^^^^^^^^^^^^^^^^^^^^^
> clear_buffer_freed(bh);
> ^^^^^^^^^^^^^^^^^^^^^^^^
> clear_buffer_jbddirty(bh);
> }
>
> if (buffer_jbddirty(bh)) {
> JBUFFER_TRACE(jh, "add to new checkpointing trans");
> __journal_insert_checkpoint(jh, commit_transaction);
> JBUFFER_TRACE(jh, "refile for checkpoint writeback");
> __journal_refile_buffer(jh);
> jbd_unlock_bh_state(bh);
> } else {
> J_ASSERT_BH(bh, !buffer_dirty(bh));
> ...
> JBUFFER_TRACE(jh, "refile or unfile freed buffer");
> __journal_refile_buffer(jh);
> if (!jh->b_transaction) {
> jbd_unlock_bh_state(bh);
> /* needs a brelse */
> journal_remove_journal_head(bh);
> release_buffer_page(bh);
> ^^^^^^^^^^^^^^^^^^^^^^^^
> } else
> }
****************************************************************
* Apply the code of "^^^^^^" lines into 'JBD: commit phase 2' *
****************************************************************
At journal_commit_transaction() code, there is one extra message in the
series of jbd debug messages. ("JBD: commit phase 2") This patch fixes
it, too.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
journal_try_to_free_buffers() could race with jbd commit transaction when
the later is holding the buffer reference while waiting for the data
buffer to flush to disk. If the caller of journal_try_to_free_buffers()
request tries hard to release the buffers, it will treat the failure as
error and return back to the caller. We have seen the directo IO failed
due to this race. Some of the caller of releasepage() also expecting the
buffer to be dropped when passed with GFP_KERNEL mask to the
releasepage()->journal_try_to_free_buffers().
With this patch, if the caller is passing the __GFP_WAIT and __GFP_FS to
indicating this call could wait, in case of try_to_free_buffers() failed,
let's waiting for journal_commit_transaction() to finish commit the
current committing transaction, then try to free those buffers again.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make revocation cache destruction safe to call if initialisation fails
partially or entirely. This allows it to be used to cleanup in the case
of initialisation failure, simplifying that code slightly.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The revocation table initialisation/destruction code is repeated for each
of the two revocation tables stored in the journal. Refactoring the
duplicated code into functions is tidier, simplifies the logic in
initialisation in particular, and slightly reduces the code size.
There should not be any functional change.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an error occurs during jbd cache initialisation it is possible for the
journal_head_cache to be NULL when journal_destroy_journal_head_cache is
called. Replace the J_ASSERT with an if block to handle the situation
correctly.
Note that even with this fix things will break badly if jbd is statically
compiled in and cache initialisation fails.
Signed-off-by: Duane Griffin <duaneg@dghda.com
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Updating the current transaction's t_state is protected by j_state_lock. We
need to do the same when updating the t_state to T_COMMIT.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several cases where the running transaction can get buffers added to
its BJ_Metadata list which it never dirtied, which makes its t_nr_buffers
counter end up larger than its t_outstanding_credits counter.
This will cause issues when starting new transactions as while we are logging
buffers we decrement t_outstanding_buffers, so when t_outstanding_buffers goes
negative, we will report that we need less space in the journal than we
actually need, so transactions will be started even though there may not be
enough room for them. In the worst case scenario (which admittedly is almost
impossible to reproduce) this will result in the journal running out of space.
The fix is to only
refile buffers from the committing transaction to the running transactions
BJ_Modified list when b_modified is set on that journal, which is the only way
to be sure if the running transaction has modified that buffer.
This patch also fixes an accounting error in journal_forget, it is possible
that we can call journal_forget on a buffer without having modified it, only
gotten write access to it, so instead of freeing a credit, we only do so if
the buffer was modified. The assert will help catch if this problem occurs.
Without these two patches I could hit this assert within minutes of running
postmark, with them this issue no longer arises. Thank you,
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.
The problem is that everywhere else this flag is modified only under the jbd
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.
This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to. This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.
That will be important for the next patch in this series. Tested thoroughly
by myself using postmark/iozone/bonnie++.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Acked-by: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc notation warnings in fs/.
Warning(mmotm-2008-0314-1449//fs/super.c:560): missing initial short description on line:
* mark_files_ro
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/locks.c:1277): missing initial short description on line:
* lease_get_mtime
Warning(mmotm-2008-0314-1449//fs/namei.c:1368): missing initial short description on line:
* lookup_one_len: filesystem helper to lookup single pathname component
Warning(mmotm-2008-0314-1449//fs/buffer.c:3221): missing initial short description on line:
* bh_uptodate_or_lock: Test whether the buffer is uptodate
Warning(mmotm-2008-0314-1449//fs/buffer.c:3240): missing initial short description on line:
* bh_submit_read: Submit a locked buffer for reading
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:30): missing initial short description on line:
* writeback_acquire: attempt to get exclusive writeback access to a device
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:47): missing initial short description on line:
* writeback_in_progress: determine whether there is writeback in progress
Warning(mmotm-2008-0314-1449//fs/fs-writeback.c:58): missing initial short description on line:
* writeback_release: relinquish exclusive writeback access against a device.
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:351): contents before sections
Warning(mmotm-2008-0314-1449//include/linux/jbd.h:561): contents before sections
Warning(mmotm-2008-0314-1449//fs/jbd/transaction.c:1935): missing initial short description on line:
* void journal_invalidatepage()
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing typo (predating git) that will cause data corruption if a
journal data block needs unescaping. At the moment the wrong buffer head's
data is being unescaped.
To test this case mount a filesystem with data=journal, start creating and
deleting a bunch of files containing only JFS_MAGIC_NUMBER (0xc03b3998), then
pull the plug on the device. Without this patch the files will contain zeros
instead of the correct data after recovery.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix docbook problems in filesystems.tmpl.
These cause the generated docbook to be incorrect.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit block was intended to have several copies of the header. But
due to a bug it never had them and actually, nobody checks that. So
just remove the useless loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some devices - notably dm and md - can change their behaviour in response
to BIO_RW_BARRIER requests. They might start out accepting such requests
but on reconfiguration, they find out that they cannot any more.
ext3 (and other filesystems) deal with this by always testing if
BIO_RW_BARRIER requests fail with EOPNOTSUPP, and retrying the write
requests without the barrier (probably after waiting for any pending writes
to complete).
However there is a bug in the handling for this for ext3.
When ext3 (jbd actually) decides to submit a BIO_RW_BARRIER request, it
sets the buffer_ordered flag on the buffer head. If the request completes
successfully, the flag STAYS SET.
Other code might then write the same buffer_head after the device has been
reconfigured to not accept barriers. This write will then fail, but the
"other code" is not ready to handle EOPNOTSUPP errors and the error will be
treated as fatal.
This can be seen without having to reconfigure a device at exactly the
wrong time by putting:
if (buffer_ordered(bh))
printk("OH DEAR, and ordered buffer\n");
in the while loop in "commit phase 5" of journal_commit_transaction.
If it ever prints the "OH DEAR ..." message (as it does sometimes for
me), then that request could (in different circumstances) have failed
with EOPNOTSUPP, but that isn't tested for.
My proposed fix is to clear the buffer_ordered flag after it has been
used, as in the following patch.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__journal_abort_hard() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
None of the callers of this function does actually take the BKL as far as I
can see. So remove the comment refering to the BKL.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.
Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.
Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.
If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).
We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state. The locking there is subtle though (as
everywhere in JBD ;(). We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.
Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either. Better be safe if something
changes in future...
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Note from Mingming's JBD2 fix:
Noticed all warnings are occurs when the debug level is 0. Then found the
"jbd2: Move jbd2-debug file to debugfs" patch
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b
changed the jbd2_journal_enable_debug from int type to u8, makes the
jbd_debug comparision is always true when the debugging level is 0. Thus
the compile warning occurs.
Thought about changing the jbd2_journal_enable_debug data type back to int,
but can't, because the jbd2-debug is moved to debug fs, where calling
debugfs_create_u8() to create the debugfs entry needs the value to be u8
type.
Even if we changed the data type back to int, the code is still buggy,
kernel should not print jbd2 debug message if the jbd2_journal_enable_debug
is set to 0. But this is not the case.
The fix is change the level of debugging to 1. The same should fixed in
ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we
probably should fix it all together.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should really call journal_abort() and not __journal_abort_hard() in
case of errors. The latter call does not record the error in the journal
superblock and thus filesystem won't be marked as with errors later (and
user could happily mount it without any warning).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The jbd-debug file used to be located in /proc/sys/fs/jbd-debug, but
create_proc_entry() does not do lookups on file names that are more that
one directory deep. This causes the entry creation to fail and hence, no
proc file is created.
Instead of fixing this on procfs might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd/jbd-debug.
[akpm@linux-foundation.org: zillions of cleanups]
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert kmalloc to kzalloc() and get rid of the memset().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of sparse related warnings from places that use integer as NULL
pointer.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JBD: Replace slab allocations with page allocations
JBD allocate memory for committed_data and frozen_data from slab. However
JBD should not pass slab pages down to the block layer. Use page allocator pages instead. This will also prepare JBD for the large blocksize patchset.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
This patch marks a number of allocations that are either short-lived such as
network buffers or are reclaimable such as inode allocations. When something
like updatedb is called, long-lived and unmovable kernel allocations tend to
be spread throughout the address space which increases fragmentation.
This patch groups these allocations together as much as possible by adding a
new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be
reclaimed on demand, but not moved. i.e. they can be migrated by deleting
them and re-reading the information from elsewhere.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On Fri, 2007-07-13 at 02:05 -0700, Andrew Morton wrote:
> Except lockdep doesn't know about journal_start(), which has ranking
> requirements similar to a semaphore.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Replace (n & (n-1)) in the context of power of 2 checks with
is_power_of_2().
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
If the thread failed to create the subsequent wait_event will hang forever.
This is likely to happen if kernel hits max_threads limit.
Will be critical for virtualization systems that limit the number of tasks
and kernel memory usage within the container.
(akpm: JBD should be converted fully to the kthread API: kthread_should_stop()
and kthread_stop()).
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not
locked, the buffer is refiled to BJ_Locked list, submitted to the IO and
waited for IO completion.
But the fsstress test showed the case that when a buffer was already
submitted to the IO just before the buffer_dirty(bh) check, the buffer was
not waited for IO completion.
Following patch solves this problem. If it is assumed that a buffer is
submitted to the IO before the buffer_dirty(bh) check and still being
written to disk, this buffer is refiled to BJ_Locked list.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jan Kara <jack@ucw.cz>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces a user: of the round_jiffies() function; the "5 second"
ext3/jbd wakeup.
While "every 5 seconds" doesn't sound as a problem, there can be many of these
(and these timers do add up over all the kernel). The "5 second" wakeup isn't
really timing sensitive; in addition even with rounding it'll still happen
every 5 seconds (with the exception of the very first time, which is likely to
be rounded up to somewhere closer to 6 seconds)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Namhyung Kim
Darrick J. Wong
Linus Torvalds
Corrado Zoccolo
Christoph Hellwig
Christoph Hellwig
Andi Kleen
Jan Kara
Tejun Heo
Jiri Kosina
Daniel Mack
Yin Kangkai
Hiroshi Shimamoto
Stefan Schmidt
Tao Ma
Andreas Dilger
dingdinghua
Hisashi Hifumi
Theodore Ts'o
Jens Axboe
Randy Dunlap
Josef Bacik
Duane Griffin
Hidehiro Kawai
Alexey Dobriyan
Ingo Molnar
Peter Zijlstra
Nick Piggin
Toshiyuki Okajima
Adrian Bunk
Mingming Cao
Harvey Harrison
Al Viro
Neil Brown
Andi Kleen
Jonas Bonn
Jose R. Santos
Stephen Hemminger
Mel Gorman
Paul Mundt
vignesh babu
Uwe Kleine-König
Pavel Emelianov
Arjan van de Ven
Adrian Bunk
Nigel Cunningham