For SYSTEM chunks, despite the regular chunk item size limit, there is
another limit due to system chunk array size.
The extra limit was removed in a refactoring, so add it back.
Fixes: e3ecdb3fde ("btrfs: factor out devs_max setting in __btrfs_alloc_chunk")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the command:
btrfs balance start -dconvert=single,soft .
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feec ("btrfs: use common helper instead of open coding a bit test")
CC: stable@vger.kernel.org # 4.20+
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With v5.3 kernel, we can't convert to SINGLE profile:
# btrfs balance start -f -dconvert=single $mnt
ERROR: error during balancing '/mnt/btrfs': Invalid argument
# dmesg -t | tail
validate_convert_profile: data profile=0x1000000000000 allowed=0x20 is_valid=1 final=0x1000000000000 ret=1
BTRFS error (device dm-3): balance: invalid convert data profile single
[CAUSE]
With the extra debug output added, it shows that the @allowed bit is
lacking the special in-memory only SINGLE profile bit.
Thus we fail at that (profile & ~allowed) check.
This regression is caused by commit 081db89b13 ("btrfs: use raid_attr
to get allowed profiles for balance conversion") and the fact that we
don't use any bit to indicate SINGLE profile on-disk, but uses special
in-memory only bit to help distinguish different profiles.
[FIX]
Add that BTRFS_AVAIL_ALLOC_BIT_SINGLE to @allowed, so the code should be
the same as it was and fix the regression.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 081db89b13 ("btrfs: use raid_attr to get allowed profiles for balance conversion")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The other dev stats functions are already there and the helpers are not
used by anything else.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the fake ENOMEM return error code to the actual error in
clone_fs_devices().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a corrupted tree, if search for next devid finds the device with
devid = -1, then report the error -EUCLEAN back to the parent function
to fail gracefully.
The tree checker will not catch this in case the devids are created
using the following script:
umount /btrfs
dev1=/dev/sdb
dev2=/dev/sdc
mkfs.btrfs -fq -dsingle -msingle $dev1
mount $dev1 /btrfs
_fail()
{
echo $1
exit 1
}
while true; do
btrfs dev add -f $dev2 /btrfs || _fail "add failed"
btrfs dev del $dev1 /btrfs || _fail "del failed"
dev_tmp=$dev1
dev1=$dev2
dev2=$dev_tmp
done
With output:
BTRFS critical (device sdb): corrupt leaf: root=3 block=313739198464 slot=1 devid=1 invalid devid: has=507 expect=[0, 506]
BTRFS error (device sdb): block=313739198464 write time tree block corruption detected
BTRFS: error (device sdb) in btrfs_commit_transaction:2268: errno=-5 IO failure (Error while writing out transaction)
BTRFS warning (device sdb): Skipping commit of aborted transaction.
BTRFS: error (device sdb) in cleanup_transaction:1827: errno=-5 IO failure
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ add script and messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_get_chunk_map() never returns NULL, it returns error pointers.
Fixes: 89b798ad1b ("btrfs: Use btrfs_get_io_geometry appropriately")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the function btrfs_init_dev_stats() goto out is not needed, because the
alloc has failed. So just return -ENOMEM.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
%found_key is not used, drop it since it hasn't been used since the
beginning in 733f4fbbc1 ("Btrfs: read device stats on mount, write
modified ones during commit").
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_reset_dev_stats() is a small helper function to reset devices stat
values, and is used only once, instead just open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_dev_stat_reset() is an overdo in terms of wrapping. So this patch
open codes btrfs_dev_stat_reset().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Test case btrfs/156 fails since commit 302167c50b ("btrfs: don't end
the transaction for delayed refs in throttle") with ENOSPC.
[CAUSE]
The ENOSPC is reported from btrfs_can_relocate().
This function will check:
- If this block group is empty, we can relocate
- If we can enough free space, we can relocate
Above checks are valid but the following check is vague due to its
implementation:
- If and only if we can allocated a new block group to contain all the
used space, we can relocate
This design itself is OK, but the way to determine if we can allocate a
new block group is problematic.
btrfs_can_relocate() uses find_free_dev_extent() to find free space on a
device.
However find_free_dev_extent() only searches commit root and excludes
dev extents allocated in current trans, this makes it unable to use dev
extent just freed in current transaction.
So for the following example, btrfs_can_relocate() will report ENOSPC:
The example block group layout:
1M 129M 257M 385M 513M 550M
|///////|///////////|//////////| | |
// = Used bg, consider all bg is 100% used for easy calculation.
And all block groups are SINGLE, on-disk bytenr is the same as the
logical bytenr.
1) Bg in [129M, 257M) get relocated to [385M, 513M), transid=100
1M 129M 257M 385M 513M 550M
|///////| |//////////|/////////|
In transid 100, bg in [129M, 257M) get relocated to [385M, 513M)
However transid 100 is not committed yet, so in dev commit tree, we
still have the old dev extents layout:
1M 129M 257M 385M 513M 550M
|///////|///////////|//////////| | |
2) Try to relocate bg [257M, 385M)
We goes into btrfs_can_relocate(), no free space in current bgs, so we
check if we can find large enough free dev extents.
The first slot is [385M, 513M), but that is already used by new bg at
[385M, 513M), so we continue search.
The remaining slot is [512M, 550M), smaller than the bg's length 128M.
So btrfs_can_relocate report ENOSPC.
However this is over killed, in fact if we just skip btrfs_can_relocate()
check, and go into regular relocation routine, at extent reservation time,
if we can't find free extent, then we fallback to commit transaction,
which will free up the dev extents and allow new block group to be created.
[FIX]
The fix here is to remove btrfs_can_relocate() completely.
If we hit the false ENOSPC case just like btrfs/156, extent allocator
will push harder by committing transaction and we will have space for
new block group, avoiding the false ENOSPC.
If we really ran out of space, we will hit ENOSPC at
relocate_block_group(), and btrfs will just reports the ENOSPC error as
usual.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit 6df9a95e63 ("Btrfs: make the chunk allocator completely
tree lockless") we search commit root of device tree to avoid deadlock.
This introduced a safety feature, find_free_dev_extent_start() won't
use dev extents which just get freed in current transaction.
This safety feature makes sure we won't allocate new block group using
just freed dev extents to break CoW.
However, this feature also makes find_free_dev_extent_start() not
reliable reporting free device space. Just add such comment to make
later viewer careful about this behavior.
This behavior makes one caller, btrfs_can_relocate() unreliable
determining the device free space.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is only used locally in find_free_dev_extent(), no
external callers.
So unexport it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/btrfs/volumes.c: In function __btrfs_map_block:
fs/btrfs/volumes.c:6023:6: warning:
variable offset set but not used [-Wunused-but-set-variable]
It is not used any more since commit 343abd1c0ca9 ("btrfs: Use
btrfs_get_io_geometry appropriately")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the 5.3 merge window, commit 7c7e301406 ("btrfs: sysfs: Replace
default_attrs in ktypes with groups"), we started using the member
"defaults_groups" for the kobject type "btrfs_raid_ktype". That leads
to a series of warnings when running some test cases of fstests, such
as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those
warnings are like the following:
[116648.059212] kernfs: can not remove 'total_bytes', no directory
[116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000
[116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001
[116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.077143] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.077852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.080585] Call Trace:
[116648.081262] remove_files+0x31/0x70
[116648.081929] sysfs_remove_group+0x38/0x80
[116648.082596] sysfs_remove_groups+0x34/0x70
[116648.083258] kobject_del+0x20/0x60
[116648.083933] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.084608] close_ctree+0x19a/0x380 [btrfs]
[116648.085278] generic_shutdown_super+0x6c/0x110
[116648.085951] kill_anon_super+0xe/0x30
[116648.086621] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.087289] deactivate_locked_super+0x3a/0x70
[116648.087956] cleanup_mnt+0xb4/0x160
[116648.088620] task_work_run+0x7e/0xc0
[116648.089285] exit_to_usermode_loop+0xfa/0x100
[116648.089933] do_syscall_64+0x1cb/0x220
[116648.090567] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.091197] RIP: 0033:0x7f9cdc073b37
(...)
[116648.100046] ---[ end trace 22e24db328ccadf8 ]---
[116648.100618] ------------[ cut here ]------------
[116648.101175] kernfs: can not remove 'used_bytes', no directory
[116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000
[116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001
[116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.113268] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.113939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.116649] Call Trace:
[116648.117326] remove_files+0x31/0x70
[116648.117997] sysfs_remove_group+0x38/0x80
[116648.118671] sysfs_remove_groups+0x34/0x70
[116648.119342] kobject_del+0x20/0x60
[116648.120022] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.120707] close_ctree+0x19a/0x380 [btrfs]
[116648.121396] generic_shutdown_super+0x6c/0x110
[116648.122057] kill_anon_super+0xe/0x30
[116648.122702] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.123335] deactivate_locked_super+0x3a/0x70
[116648.123961] cleanup_mnt+0xb4/0x160
[116648.124586] task_work_run+0x7e/0xc0
[116648.125210] exit_to_usermode_loop+0xfa/0x100
[116648.125830] do_syscall_64+0x1cb/0x220
[116648.126463] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.127080] RIP: 0033:0x7f9cdc073b37
(...)
[116648.135923] ---[ end trace 22e24db328ccadf9 ]---
These happen because, during the unmount path, we call kobject_del() for
raid kobjects that are not fully initialized, meaning that we set their
ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set
their parent kobject, which is done through btrfs_add_raid_kobjects().
We have this split raid kobject setup since commit 75cb379d26
("btrfs: defer adding raid type kobject until after chunk relocation") in
order to avoid triggering reclaim during contextes where we can not
(either we are holding a transaction handle or some lock required by
the transaction commit path), so that we do the calls to kobject_add(),
which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects()
in contextes where it is safe to trigger reclaim. That change expected
that a new raid kobject can only be created either when mounting the
filesystem or after raid profile conversion through the relocation path.
However, we can have new raid kobject created in other two cases at least:
1) During device replace (or scrub) after adding a device a to the
filesystem. The replace procedure (and scrub) do calls to
btrfs_inc_block_group_ro() which can allocate a new block group
with a new raid profile (because we now have more devices). This
can be triggered by test cases btrfs/027 and btrfs/176.
2) During a degraded mount trough any write path. This can be triggered
by test case btrfs/124.
Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only
makes things more complex and fragile, can also introduce deadlocks with
reclaim the following way:
1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or
anywhere in the replace/scrub path will cause a deadlock with reclaim
because if reclaim happens and a transaction commit is triggered,
the transaction commit path will block at btrfs_scrub_pause().
2) During degraded mounts it is essentially impossible to figure out where
to add extra calls to btrfs_add_raid_kobjects(), because allocation of
a block group with a new raid profile can happen anywhere, which means
we can't safely figure out which contextes are safe for reclaim, as
we can either hold a transaction handle or some lock needed by the
transaction commit path.
So it is too complex and error prone to have this split setup of raid
kobjects. So fix the issue by consolidating the setup of the kobjects in a
single place, at link_block_group(), and setup a nofs context there in
order to prevent reclaim being triggered by the memory allocations done
through the call chain of kobject_add().
Besides fixing the sysfs warnings during kobject_del(), this also ensures
the sysfs directories for the new raid profiles end up created and visible
to users (a bug that existed before the 5.3 commit 7c7e301406
("btrfs: sysfs: Replace default_attrs in ktypes with groups")).
Fixes: 75cb379d26 ("btrfs: defer adding raid type kobject until after chunk relocation")
Fixes: 7c7e301406 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_get_io_geometry() calls btrfs_get_chunk_map() to acquire a reference
on a extent_map, but on normal operation it does not drop this reference
anymore.
This leads to excessive kmemleak reports.
Always call free_extent_map(), not just in the error case.
Fixes: 5f1411265e ("btrfs: Introduce btrfs_io_geometry infrastructure")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Presently btrfs_map_block is used not only to do everything necessary to
map a bio to the underlying allocation profile but it's also used to
identify how much data could be written based on btrfs' stripe logic
without actually submitting anything. This is achieved by passing NULL
for 'bbio_ret' parameter.
This patch refactors all callers that require just the mapping length
by switching them to using btrfs_io_geometry instead of calling
btrfs_map_block with a special NULL value for 'bbio_ret'. No functional
change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a structure that holds various parameters for IO calculations and a
helper that fills the values. This will help further refactoring and
reduction of functions that in some way open-coded the calculations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Send always operates on read-only trees and always expected that while it
is in progress, nothing changes in those trees. Due to that expectation
and the fact that send is a read-only operation, it operates on commit
roots and does not hold transaction handles. However relocation can COW
nodes and leafs from read-only trees, which can cause unexpected failures
and crashes (hitting BUG_ONs). while send using a node/leaf, it gets
COWed, the transaction used to COW it is committed, a new transaction
starts, the extent previously used for that node/leaf gets allocated,
possibly for another tree, and the respective extent buffer' content
changes while send is still using it. When this happens send normally
fails with EIO being returned to user space and messages like the
following are found in dmesg/syslog:
[ 3408.699121] BTRFS error (device sdc): parent transid verify failed on 58703872 wanted 250 found 253
[ 3441.523123] BTRFS error (device sdc): did not find backref in send_root. inode=63211, offset=0, disk_byte=5222825984 found extent=5222825984
Other times, less often, we hit a BUG_ON() because an extent buffer that
send is using used to be a node, and while send is still using it, it
got COWed and got reused as a leaf while send is still using, producing
the following trace:
[ 3478.466280] ------------[ cut here ]------------
[ 3478.466282] kernel BUG at fs/btrfs/ctree.c:1806!
[ 3478.466965] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 3478.467635] CPU: 0 PID: 2165 Comm: btrfs Not tainted 5.0.0-btrfs-next-46 #1
[ 3478.468311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[ 3478.469681] RIP: 0010:read_node_slot+0x122/0x130 [btrfs]
(...)
[ 3478.471758] RSP: 0018:ffffa437826bfaa0 EFLAGS: 00010246
[ 3478.472457] RAX: ffff961416ed7000 RBX: 000000000000003d RCX: 0000000000000002
[ 3478.473151] RDX: 000000000000003d RSI: ffff96141e387408 RDI: ffff961599b30000
[ 3478.473837] RBP: ffffa437826bfb8e R08: 0000000000000001 R09: ffffa437826bfb8e
[ 3478.474515] R10: ffffa437826bfa70 R11: 0000000000000000 R12: ffff9614385c8708
[ 3478.475186] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 3478.475840] FS: 00007f8e0e9cc8c0(0000) GS:ffff9615b6a00000(0000) knlGS:0000000000000000
[ 3478.476489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3478.477127] CR2: 00007f98b67a056e CR3: 0000000005df6005 CR4: 00000000003606f0
[ 3478.477762] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3478.478385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 3478.479003] Call Trace:
[ 3478.479600] ? do_raw_spin_unlock+0x49/0xc0
[ 3478.480202] tree_advance+0x173/0x1d0 [btrfs]
[ 3478.480810] btrfs_compare_trees+0x30c/0x690 [btrfs]
[ 3478.481388] ? process_extent+0x1280/0x1280 [btrfs]
[ 3478.481954] btrfs_ioctl_send+0x1037/0x1270 [btrfs]
[ 3478.482510] _btrfs_ioctl_send+0x80/0x110 [btrfs]
[ 3478.483062] btrfs_ioctl+0x13fe/0x3120 [btrfs]
[ 3478.483581] ? rq_clock_task+0x2e/0x60
[ 3478.484086] ? wake_up_new_task+0x1f3/0x370
[ 3478.484582] ? do_vfs_ioctl+0xa2/0x6f0
[ 3478.485075] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[ 3478.485552] do_vfs_ioctl+0xa2/0x6f0
[ 3478.486016] ? __fget+0x113/0x200
[ 3478.486467] ksys_ioctl+0x70/0x80
[ 3478.486911] __x64_sys_ioctl+0x16/0x20
[ 3478.487337] do_syscall_64+0x60/0x1b0
[ 3478.487751] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 3478.488159] RIP: 0033:0x7f8e0d7d4dd7
(...)
[ 3478.489349] RSP: 002b:00007ffcf6fb4908 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[ 3478.489742] RAX: ffffffffffffffda RBX: 0000000000000105 RCX: 00007f8e0d7d4dd7
[ 3478.490142] RDX: 00007ffcf6fb4990 RSI: 0000000040489426 RDI: 0000000000000005
[ 3478.490548] RBP: 0000000000000005 R08: 00007f8e0d6f3700 R09: 00007f8e0d6f3700
[ 3478.490953] R10: 00007f8e0d6f39d0 R11: 0000000000000202 R12: 0000000000000005
[ 3478.491343] R13: 00005624e0780020 R14: 0000000000000000 R15: 0000000000000001
(...)
[ 3478.493352] ---[ end trace d5f537302be4f8c8 ]---
Another possibility, much less likely to happen, is that send will not
fail but the contents of the stream it produces may not be correct.
To avoid this, do not allow send and relocation (balance) to run in
parallel. In the long term the goal is to allow for both to be able to
run concurrently without any problems, but that will take a significant
effort in development and testing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory patch for additional RAID1 profiles with more copies. The
mask will contain 3-copy and 4-copy, most of the checks for plain RAID1
work the same for the other profiles.
Signed-off-by: David Sterba <dsterba@suse.com>
The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.
Signed-off-by: David Sterba <dsterba@suse.com>
Factor the sequence of ifs to a helper, the 'data stripes' here means
the number of stripes without redundancy and parity.
Signed-off-by: David Sterba <dsterba@suse.com>
Replace open coded list of the profiles by selecting them from the
raid_attr table. The criteria are now more explicit, we need profiles
that have more than 1 copy of the data or can reconstruct the data with
a missing device.
Signed-off-by: David Sterba <dsterba@suse.com>
Iterate over the table and gather all allowed profiles for a given
number of devices, instead of open coding.
Signed-off-by: David Sterba <dsterba@suse.com>
fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.
Signed-off-by: David Sterba <dsterba@suse.com>
The minimum number of devices for RAID5 is 2, though this is only a bit
expensive RAID1, and for RAID6 it's 3, which is a triple copy that works
only 3 devices.
mkfs.btrfs allows that and mounting such filesystem also works, so the
conversion via balance filters is inconsistent with the others and we
should not prevent it.
Signed-off-by: David Sterba <dsterba@suse.com>
The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.
Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.
d20983b40e Btrfs: fix writing data into the seed filesystem
- factor code to a helper
de11cc12df Btrfs: don't pre-allocate btrfs bio
- unrelated change, DUP still in the list with max errors 1
a236aed14c Btrfs: Deal with failed writes in mirrored configurations
- introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used in more than one places so let's factor it out in ctree.h.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo
Zygo Blaxell
David Sterba
Anand Jain
Dan Carpenter
Josef Bacik
YueHaibing
Filipe Manana
Johannes Thumshirn
Nikolay Borisov