Граф коммитов

504 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 505b050fdf Merge branch 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount API prep from Al Viro:
 "Mount API prereqs.

  Mostly that's LSM mount options cleanups. There are several minor
  fixes in there, but nothing earth-shattering (leaks on failure exits,
  mostly)"

* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
  mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
  smack: rewrite smack_sb_eat_lsm_opts()
  smack: get rid of match_token()
  smack: take the guts of smack_parse_opts_str() into a new helper
  LSM: new method: ->sb_add_mnt_opt()
  selinux: rewrite selinux_sb_eat_lsm_opts()
  selinux: regularize Opt_... names a bit
  selinux: switch away from match_token()
  selinux: new helper - selinux_add_opt()
  LSM: bury struct security_mnt_opts
  smack: switch to private smack_mnt_opts
  selinux: switch to private struct selinux_mnt_opts
  LSM: hide struct security_mnt_opts from any generic code
  selinux: kill selinux_sb_get_mnt_opts()
  LSM: turn sb_eat_lsm_opts() into a method
  nfs_remount(): don't leak, don't ignore LSM options quietly
  btrfs: sanitize security_mnt_opts use
  selinux; don't open-code a loop in sb_finish_set_opts()
  LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
  new helper: security_sb_eat_lsm_opts()
  ...
2019-01-05 13:25:58 -08:00
Linus Torvalds 9b286efeb5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull trivial vfs updates from Al Viro:
 "A few cleanups + Neil's namespace_unlock() optimization"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  exec: make prepare_bprm_creds static
  genheaders: %-<width>s had been there since v6; %-*s - since v7
  VFS: use synchronize_rcu_expedited() in namespace_unlock()
  iov_iter: reduce code duplication
2019-01-05 13:18:59 -08:00
Linus Torvalds 96d4f267e4 Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
Al Viro 204cc0ccf1 LSM: hide struct security_mnt_opts from any generic code
Keep void * instead, allocate on demand (in parse_str_opts, at the
moment).  Eventually both selinux and smack will be better off
with private structures with several strings in those, rather than
this "counter and two pointers to dynamically allocated arrays"
ugliness.  This commit allows to do that at leisure, without
disrupting anything outside of given module.

Changes:
	* instead of struct security_mnt_opt use an opaque pointer
initialized to NULL.
	* security_sb_eat_lsm_opts(), security_sb_parse_opts_str() and
security_free_mnt_opts() take it as var argument (i.e. as void **);
call sites are unchanged.
	* security_sb_set_mnt_opts() and security_sb_remount() take
it by value (i.e. as void *).
	* new method: ->sb_free_mnt_opts().  Takes void *, does
whatever freeing that needs to be done.
	* ->sb_set_mnt_opts() and ->sb_remount() might get NULL as
mnt_opts argument, meaning "empty".

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-21 11:48:34 -05:00
Al Viro f5c0c26d90 new helper: security_sb_eat_lsm_opts()
combination of alloc_secdata(), security_sb_copy_data(),
security_sb_parse_opt_str() and free_secdata().

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-21 11:46:00 -05:00
Al Viro c039bc3c24 LSM: lift extracting and parsing LSM options into the caller of ->sb_remount()
This paves the way for retaining the LSM options from a common filesystem
mount context during a mount parameter parsing phase to be instituted prior
to actual mount/reconfiguration actions.

Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-21 11:45:41 -05:00
David Howells 43f5e655ef vfs: Separate changing mount flags full remount
Separate just the changing of mount flags (MS_REMOUNT|MS_BIND) from full
remount because the mount data will get parsed with the new fs_context
stuff prior to doing a remount - and this causes the syscall to fail under
some circumstances.

To quote Eric's explanation:

  [...] mount(..., MS_REMOUNT|MS_BIND, ...) now validates the mount options
  string, which breaks systemd unit files with ProtectControlGroups=yes
  (e.g.  systemd-networkd.service) when systemd does the following to
  change a cgroup (v1) mount to read-only:

    mount(NULL, "/run/systemd/unit-root/sys/fs/cgroup/systemd", NULL,
	  MS_RDONLY|MS_NOSUID|MS_NODEV|MS_NOEXEC|MS_REMOUNT|MS_BIND, NULL)

  ... when the kernel has CONFIG_CGROUPS=y but no cgroup subsystems
  enabled, since in that case the error "cgroup1: Need name or subsystem
  set" is hit when the mount options string is empty.

  Probably it doesn't make sense to validate the mount options string at
  all in the MS_REMOUNT|MS_BIND case, though maybe you had something else
  in mind.

This is also worthwhile doing because we will need to add a mount_setattr()
syscall to take over the remount-bind function.

Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20 16:32:56 +00:00
David Howells e262e32d6b vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled
Only the mount namespace code that implements mount(2) should be using the
MS_* flags.  Suppress them inside the kernel unless uapi/linux/mount.h is
included.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20 16:32:56 +00:00
NeilBrown 22cb7405fa VFS: use synchronize_rcu_expedited() in namespace_unlock()
The synchronize_rcu() in namespace_unlock() is called every time
a filesystem is unmounted.  If a great many filesystems are mounted,
this can cause a noticable slow-down in, for example, system shutdown.

The sequence:
  mkdir -p /tmp/Mtest/{0..5000}
  time for i in /tmp/Mtest/*; do mount -t tmpfs tmpfs $i ; done
  time umount /tmp/Mtest/*

on a 4-cpu VM can report 8 seconds to mount the tmpfs filesystems, and
100 seconds to unmount them.

Boot the same VM with 1 CPU and it takes 18 seconds to mount the
tmpfs filesystems, but only 36 to unmount.

If we change the synchronize_rcu() to synchronize_rcu_expedited()
the umount time on a 4-cpu VM drop to 0.6 seconds

I think this 200-fold speed up is worth the slightly high system
impact of using synchronize_rcu_expedited().

Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> (from general rcu perspective)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29 18:55:10 -05:00
Benjamin Coddington 1e9c75fb9c mnt: fix __detach_mounts infinite loop
Since commit ff17fa561a ("d_invalidate(): unhash immediately")
immediately unhashes the dentry, we'll never return the mountpoint in
lookup_mountpoint(), which can lead to an unbreakable loop in
d_invalidate().

I have reports of NFS clients getting into this condition after the server
removes an export of an existing mount created through follow_automount(),
but I suspect there are various other ways to produce this problem if we
hunt down users of d_invalidate().  For example, it is possible to get into
this state by using XFS' d_invalidate() call in xfs_vn_unlink():

truncate -s 100m img{1,2}

mkfs.xfs -q -n version=ci img1
mkfs.xfs -q -n version=ci img2

mkdir -p /mnt/xfs
mount img1 /mnt/xfs

mkdir /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1

cat > /mnt/xfs/sub1/foo &
umount -l /mnt/xfs/sub1
mount img2 /mnt/xfs/sub1

mount --make-private /mnt/xfs

mkdir /mnt/xfs/sub2
mount --move /mnt/xfs/sub1 /mnt/xfs/sub2
rmdir /mnt/xfs/sub1

Fix this by moving the check for an unlinked dentry out of the
detach_mounts() path.

Fixes: ff17fa561a ("d_invalidate(): unhash immediately")
Cc: stable@vger.kernel.org
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-11-12 01:02:34 -06:00
Eric W. Biederman 9c8e0a1b68 mount: Prevent MNT_DETACH from disconnecting locked mounts
Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
>   Mounts that come as a single unit from more privileged mount are locked
>   together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0

I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace.  Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.

There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
  the vfsmounts being unmounted.  This effects the lazy rcu walk by
  kicking the walk out of rcu mode and forcing it to be a non-lazy
  walk.
- No longer disconnecting locked mounts will keep some mounts around
  longer as they stay because the are locked to other mounts.

There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.

In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.

In put_mnt_ns there may be references from process outside the mount
namespace to the mounts.  So the mounts remaining connected will
be the bug fix that is needed.  That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 01:05:32 -06:00
Eric W. Biederman df7342b240 mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.

Reproducer:
  # Hide a path to all users using a tmpfs
  root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
  root@castiana:~#

  # As an unprivileged user, unshare user namespace and mount namespace
  stgraber@castiana:~$ unshare -U -m -r

  # Confirm the path is still not accessible
  root@castiana:~# ls /sys/devices/

  # Make /sys recursively unbindable and private
  root@castiana:~# mount --make-runbindable /sys
  root@castiana:~# mount --make-private /sys

  # Recursively bind-mount the rest of /sys over to /mnnt
  root@castiana:~# mount --rbind /sys/ /mnt

  # Access our hidden /sys/device as an unprivileged user
  root@castiana:~# ls /mnt/devices/
  breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
  LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
  tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual

Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 00:30:30 -06:00
Eric W. Biederman 25d202ed82 mount: Retest MNT_LOCKED in do_umount
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.

Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held.  As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 00:14:21 -06:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Jann Horn 9da3f2b740 x86/fault: BUG() when uaccess helpers fault on kernel addresses
There have been multiple kernel vulnerabilities that permitted userspace to
pass completely unchecked pointers through to userspace accessors:

 - the waitid() bug - commit 96ca579a1e ("waitid(): Add missing
   access_ok() checks")
 - the sg/bsg read/write APIs
 - the infiniband read/write APIs

These don't happen all that often, but when they do happen, it is hard to
test for them properly; and it is probably also hard to discover them with
fuzzing. Even when an unmapped kernel address is supplied to such buggy
code, it just returns -EFAULT instead of doing a proper BUG() or at least
WARN().

Try to make such misbehaving code a bit more visible by refusing to do a
fixup in the pagefault handler code when a userspace accessor causes a #PF
on a kernel address and the current context isn't whitelisted.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: kernel-hardening@lists.openwall.com
Cc: dvyukov@google.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20180828201421.157735-7-jannh@google.com
2018-09-03 15:12:09 +02:00
Linus Torvalds aba16dc5cf Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax
Pull IDA updates from Matthew Wilcox:
 "A better IDA API:

      id = ida_alloc(ida, GFP_xxx);
      ida_free(ida, id);

  rather than the cumbersome ida_simple_get(), ida_simple_remove().

  The new IDA API is similar to ida_simple_get() but better named.  The
  internal restructuring of the IDA code removes the bitmap
  preallocation nonsense.

  I hope the net -200 lines of code is convincing"

* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
  ida: Change ida_get_new_above to return the id
  ida: Remove old API
  test_ida: check_ida_destroy and check_ida_alloc
  test_ida: Convert check_ida_conv to new API
  test_ida: Move ida_check_max
  test_ida: Move ida_check_leaf
  idr-test: Convert ida_check_nomem to new API
  ida: Start new test_ida module
  target/iscsi: Allocate session IDs from an IDA
  iscsi target: fix session creation failure handling
  drm/vmwgfx: Convert to new IDA API
  dmaengine: Convert to new IDA API
  ppc: Convert vas ID allocation to new IDA API
  media: Convert entity ID allocation to new IDA API
  ppc: Convert mmu context allocation to new IDA API
  Convert net_namespace to new IDA API
  cb710: Convert to new IDA API
  rsxx: Convert to new IDA API
  osd: Convert to new IDA API
  sd: Convert to new IDA API
  ...
2018-08-26 11:48:42 -07:00
Matthew Wilcox 169b480e4c fs: Convert namespace IDAs to new API
We don't need to keep track of the starting value; the IDA is efficient.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-21 23:54:17 -04:00
Linus Torvalds d9a185f8b4 overlayfs update for 4.19
This contains two new features:
 
  1) Stack file operations: this allows removal of several hacks from the
     VFS, proper interaction of read-only open files with copy-up,
     possibility to implement fs modifying ioctls properly, and others.
 
  2) Metadata only copy-up: when file is on lower layer and only metadata is
     modified (except size) then only copy up the metadata and continue to
     use the data from the lower file.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
 PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
 fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
 =QDXH
 -----END PGP SIGNATURE-----

Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
 "This contains two new features:

   - Stack file operations: this allows removal of several hacks from
     the VFS, proper interaction of read-only open files with copy-up,
     possibility to implement fs modifying ioctls properly, and others.

   - Metadata only copy-up: when file is on lower layer and only
     metadata is modified (except size) then only copy up the metadata
     and continue to use the data from the lower file"

* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
  ovl: Enable metadata only feature
  ovl: Do not do metacopy only for ioctl modifying file attr
  ovl: Do not do metadata only copy-up for truncate operation
  ovl: add helper to force data copy-up
  ovl: Check redirect on index as well
  ovl: Set redirect on upper inode when it is linked
  ovl: Set redirect on metacopy files upon rename
  ovl: Do not set dentry type ORIGIN for broken hardlinks
  ovl: Add an inode flag OVL_CONST_INO
  ovl: Treat metacopy dentries as type OVL_PATH_MERGE
  ovl: Check redirects for metacopy files
  ovl: Move some dir related ovl_lookup_single() code in else block
  ovl: Do not expose metacopy only dentry from d_real()
  ovl: Open file with data except for the case of fsync
  ovl: Add helper ovl_inode_realdata()
  ovl: Store lower data inode in ovl_inode
  ovl: Fix ovl_getattr() to get number of blocks from lower
  ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
  ovl: Copy up meta inode data from lowest data inode
  ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
  ...
2018-08-21 18:19:09 -07:00
Al Viro 119e1ef80e fix __legitimize_mnt()/mntput() race
__legitimize_mnt() has two problems - one is that in case of success
the check of mount_lock is not ordered wrt preceding increment of
refcount, making it possible to have successful __legitimize_mnt()
on one CPU just before the otherwise final mntpu() on another,
with __legitimize_mnt() not seeing mntput() taking the lock and
mntput() not seeing the increment done by __legitimize_mnt().
Solved by a pair of barriers.

Another is that failure of __legitimize_mnt() on the second
read_seqretry() leaves us with reference that'll need to be
dropped by caller; however, if that races with final mntput()
we can end up with caller dropping rcu_read_lock() and doing
mntput() to release that reference - with the first mntput()
having freed the damn thing just as rcu_read_lock() had been
dropped.  Solution: in "do mntput() yourself" failure case
grab mount_lock, check if MNT_DOOMED has been set by racing
final mntput() that has missed our increment and if it has -
undo the increment and treat that as "failure, caller doesn't
need to drop anything" case.

It's not easy to hit - the final mntput() has to come right
after the first read_seqretry() in __legitimize_mnt() *and*
manage to miss the increment done by __legitimize_mnt() before
the second read_seqretry() in there.  The things that are almost
impossible to hit on bare hardware are not impossible on SMP
KVM, though...

Reported-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 48a066e72d ("RCU'd vsfmounts")
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 17:51:32 -04:00
Al Viro 9ea0a46ca2 fix mntput/mntput race
mntput_no_expire() does the calculation of total refcount under mount_lock;
unfortunately, the decrement (as well as all increments) are done outside
of it, leading to false positives in the "are we dropping the last reference"
test.  Consider the following situation:
	* mnt is a lazy-umounted mount, kept alive by two opened files.  One
of those files gets closed.  Total refcount of mnt is 2.  On CPU 42
mntput(mnt) (called from __fput()) drops one reference, decrementing component
	* After it has looked at component #0, the process on CPU 0 does
mntget(), incrementing component #0, gets preempted and gets to run again -
on CPU 69.  There it does mntput(), which drops the reference (component #69)
and proceeds to spin on mount_lock.
	* On CPU 42 our first mntput() finishes counting.  It observes the
decrement of component #69, but not the increment of component #0.  As the
result, the total it gets is not 1 as it should've been - it's 0.  At which
point we decide that vfsmount needs to be killed and proceed to free it and
shut the filesystem down.  However, there's still another opened file
on that filesystem, with reference to (now freed) vfsmount, etc. and we are
screwed.

It's not a wide race, but it can be reproduced with artificial slowdown of
the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups.

Fix consists of moving the refcount decrement under mount_lock; the tricky
part is that we want (and can) keep the fast case (i.e. mount that still
has non-NULL ->mnt_ns) entirely out of mount_lock.  All places that zero
mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu()
before that mntput().  IOW, if mntput() observes (under rcu_read_lock())
a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to
be dropped.

Reported-by: Jann Horn <jannh@google.com>
Tested-by: Jann Horn <jannh@google.com>
Fixes: 48a066e72d ("RCU'd vsfmounts")
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 17:21:17 -04:00
Miklos Szeredi a6795a5859 vfs: fix freeze protection in mnt_want_write_file() for overlayfs
The underlying real file used by overlayfs still contains the overlay path.
This results in mnt_want_write_file() calls by the filesystem getting
freeze protection on the wrong inode (the overlayfs one instead of the real
one).

Fix by using file_inode(file)->i_sb instead of file->f_path.mnt->mnt_sb.

Reported-by: Amir Goldstein <amir73il@gmail.com> 
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-18 15:44:43 +02:00
Miklos Szeredi 6742cee043 Revert "ovl: don't allow writing ioctl on lower layer"
This reverts commit 7c6893e3c9.

Overlayfs no longer relies on the vfs for checking writability of files.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:43 +02:00
Miklos Szeredi d561f21856 Revert "ovl: fix may_write_real() for overlayfs directories"
This reverts commit 954c736f86.

Overlayfs no longer relies on the vfs for checking writability of files.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:43 +02:00
Eric W. Biederman bc6155d132 fs: Allow superblock owner to access do_remount_sb()
Superblock level remounts are currently restricted to global
CAP_SYS_ADMIN, as is the path for changing the root mount to
read only on umount. Loosen both of these permission checks to
also allow CAP_SYS_ADMIN in any namespace which is privileged
towards the userns which originally mounted the filesystem.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-05-24 12:02:25 -05:00
David Howells a9e5b73288 vfs: Undo an overly zealous MS_RDONLY -> SB_RDONLY conversion
In do_mount() when the MS_* flags are being converted to MNT_* flags,
MS_RDONLY got accidentally convered to SB_RDONLY.

Undo this change.

Fixes: e462ec50cb ("VFS: Differentiate mount flags (MS_*) from internal superblock flags")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-20 09:59:33 -07:00
Al Viro 16a34adb93 Don't leak MNT_INTERNAL away from internal mounts
We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for
their copies.  As it is, creating a deep stack of bindings of /proc/*/ns/*
somewhere in a new namespace and exiting yields a stack overflow.

Cc: stable@kernel.org
Reported-by: Alexander Aring <aring@mojatatu.com>
Bisected-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-04-19 23:52:15 -04:00
Dominik Brodowski 3a18ef5c1b fs: add ksys_umount() helper; remove in-kernel call to sys_umount()
Using this helper allows us to avoid the in-kernel call to the sys_umount()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as ksys_umount().

In the near future, the only fs-external caller of ksys_umount() should be
converted to call do_umount() directly. Then, ksys_umount() can be moved
within sys_umount() again.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:48 +02:00
Dominik Brodowski 312db1aa1d fs: add ksys_mount() helper; remove in-kernel calls to sys_mount()
Using this helper allows us to avoid the in-kernel calls to the sys_mount()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as sys_mount().

In the near future, all callers of ksys_mount() should be converted to call
do_mount() directly.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:48 +02:00
Markus Trippelsdorf d7ee946942 VFS: Handle lazytime in do_mount()
Since commit e462ec50cb ("VFS: Differentiate mount flags (MS_*) from
internal superblock flags") the lazytime mount option doesn't get passed
on anymore.

Fix the issue by handling the option in do_mount().

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-09 20:16:33 -05:00
Mark Rutland 6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Mimi Zohar 917086ff23 vfs: fix mounting a filesystem with i_version
The mount i_version flag is not enabled in the new sb_flags.  This patch
adds the missing SB_I_VERSION flag.

Fixes: e462ec5 "VFS: Differentiate mount flags (MS_*) from internal
       superblock flags"
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-10-17 02:22:07 -04:00
Amir Goldstein 954c736f86 ovl: fix may_write_real() for overlayfs directories
Overlayfs directory file_inode() is the overlay inode whether the real
inode is upper or lower.

This fixes a regression in xfstest generic/158.

Fixes: 7c6893e3c9 ("ovl: don't allow writing ioctl on lower layer")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-10-05 15:53:18 +02:00
Linus Torvalds 9e0ce554b0 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc leftovers from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the __user misannotations in asm-generic get_user/put_user
  fput: Don't reinvent the wheel but use existing llist API
  namespace.c: Don't reinvent the wheel but use existing llist API
2017-09-14 20:01:41 -07:00
Linus Torvalds 0f0d12728e Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

	list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

	sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
	        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
	        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
	        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
	        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
	        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
	        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
	        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
	        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
	        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
	        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
	        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
	        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
	        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
	        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
2017-09-14 18:54:01 -07:00
Miklos Szeredi 7c6893e3c9 ovl: don't allow writing ioctl on lower layer
Problem with ioctl() is that it's a file operation, yet often used as an
inode operation (i.e. modify the inode despite the file being opened for
read-only).

mnt_want_write_file() is used by filesystems in such cases to get write
access on an arbitrary open file.

Since overlayfs lets filesystems do all file operations, including ioctl,
this can lead to mnt_want_write_file() returning OK for a lower file and
modification of that lower file.

This patch prevents modification by checking if the file is from an
overlayfs lower layer and returning EPERM in that case.

Need to introduce a mnt_want_write_file_path() variant that still does the
old thing for inode operations that can do the copy up + modification
correctly in such cases (fchown, fsetxattr, fremovexattr).

This does not address the correctness of such ioctls on overlayfs (the
correct way would be to copy up and attempt to perform ioctl on upper
file).

In theory this could be a regression.  We very much hope that nobody is
relying on such a hack in any sane setup.

While this patch meddles in VFS code, it has no effect on non-overlayfs
filesystems.

Reported-by: "zhangyi (F)" <yi.zhang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-05 12:53:12 +02:00
Byungchul Park 2978573578 namespace.c: Don't reinvent the wheel but use existing llist API
Although llist provides proper APIs, they are not used. Make them used.

Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-08-28 00:50:22 -04:00
David Howells e462ec50cb VFS: Differentiate mount flags (MS_*) from internal superblock flags
Differentiate the MS_* flags passed to mount(2) from the internal flags set
in the super_block's s_flags.  s_flags are now called SB_*, with the names
and the values for the moment mirroring the MS_* flags that they're
equivalent to.

In this patch, just the headers are altered and some kernel code where
blind automated conversion isn't necessarily correct.

Note that this shows up some interesting issues:

 (1) Some MS_* flags get translated to MNT_* flags (such as MS_NODEV ->
     MNT_NODEV) without passing this on to the filesystem, but some
     filesystems set such flags anyway.

 (2) The ->remount_fs() methods of some filesystems adjust the *flags
     argument by setting MS_* flags in it, such as MS_NOATIME - but these
     flags are then scrubbed by do_remount_sb() (only the occupants of
     MS_RMT_MASK are permitted: MS_RDONLY, MS_SYNCHRONOUS, MS_MANDLOCK,
     MS_I_VERSION and MS_LAZYTIME)

I'm not sure what's the best way to solve all these cases.

Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:35 +01:00
David Howells bc98a42c1f VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
Firstly by applying the following with coccinelle's spatch:

	@@ expression SB; @@
	-SB->s_flags & MS_RDONLY
	+sb_rdonly(SB)

to effect the conversion to sb_rdonly(sb), then by applying:

	@@ expression A, SB; @@
	(
	-(!sb_rdonly(SB)) && A
	+!sb_rdonly(SB) && A
	|
	-A != (sb_rdonly(SB))
	+A != sb_rdonly(SB)
	|
	-A == (sb_rdonly(SB))
	+A == sb_rdonly(SB)
	|
	-!(sb_rdonly(SB))
	+!sb_rdonly(SB)
	|
	-A && (sb_rdonly(SB))
	+A && sb_rdonly(SB)
	|
	-A || (sb_rdonly(SB))
	+A || sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) != A
	+sb_rdonly(SB) != A
	|
	-(sb_rdonly(SB)) == A
	+sb_rdonly(SB) == A
	|
	-(sb_rdonly(SB)) && A
	+sb_rdonly(SB) && A
	|
	-(sb_rdonly(SB)) || A
	+sb_rdonly(SB) || A
	)

	@@ expression A, B, SB; @@
	(
	-(sb_rdonly(SB)) ? 1 : 0
	+sb_rdonly(SB)
	|
	-(sb_rdonly(SB)) ? A : B
	+sb_rdonly(SB) ? A : B
	)

to remove left over excess bracketage and finally by applying:

	@@ expression A, SB; @@
	(
	-(A & MS_RDONLY) != sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
	|
	-(A & MS_RDONLY) == sb_rdonly(SB)
	+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
	)

to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-07-17 08:45:34 +01:00
Linus Torvalds 78dcf73421 Merge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ->s_options removal from Al Viro:
 "Preparations for fsmount/fsopen stuff (coming next cycle). Everything
  gets moved to explicit ->show_options(), killing ->s_options off +
  some cosmetic bits around fs/namespace.c and friends. Basically, the
  stuff needed to work with fsmount series with minimum of conflicts
  with other work.

  It's not strictly required for this merge window, but it would reduce
  the PITA during the coming cycle, so it would be nice to have those
  bits and pieces out of the way"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  isofs: Fix isofs_show_options()
  VFS: Kill off s_options and helpers
  orangefs: Implement show_options
  9p: Implement show_options
  isofs: Implement show_options
  afs: Implement show_options
  affs: Implement show_options
  befs: Implement show_options
  spufs: Implement show_options
  bpf: Implement show_options
  ramfs: Implement show_options
  pstore: Implement show_options
  omfs: Implement show_options
  hugetlbfs: Implement show_options
  VFS: Don't use save/replace_mount_options if not using generic_show_options
  VFS: Provide empty name qstr
  VFS: Make get_filesystem() return the affected filesystem
  VFS: Clean up whitespace in fs/namespace.c and fs/super.c
  Provide a function to create a NUL-terminated string from unterminated data
2017-07-15 12:00:42 -07:00
David Howells 1d278a8790 VFS: Kill off s_options and helpers
Kill off s_options, save/replace_mount_options() and generic_show_options()
as all filesystems now implement ->show_options() for themselves.  This
should make it easier to implement a context-based mount where the mount
options can be passed individually over a file descriptor.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-11 06:09:21 -04:00
Pavel Tatashin 3d375d7859 mm: update callers to use HASH_ZERO flag
Update dcache, inode, pid, mountpoint, and mount hash tables to use
HASH_ZERO, and remove initialization after allocations.  In case of
places where HASH_EARLY was used such as in __pv_init_lock_hash the
zeroed hash table was already assumed, because memblock zeroes the
memory.

CPU: SPARC M6, Memory: 7T
Before fix:
  Dentry cache hash table entries: 1073741824
  Inode-cache hash table entries: 536870912
  Mount-cache hash table entries: 16777216
  Mountpoint-cache hash table entries: 16777216
  ftrace: allocating 20414 entries in 40 pages
  Total time: 11.798s

After fix:
  Dentry cache hash table entries: 1073741824
  Inode-cache hash table entries: 536870912
  Mount-cache hash table entries: 16777216
  Mountpoint-cache hash table entries: 16777216
  ftrace: allocating 20414 entries in 40 pages
  Total time: 3.198s

CPU: Intel Xeon E5-2630, Memory: 2.2T:
Before fix:
  Dentry cache hash table entries: 536870912
  Inode-cache hash table entries: 268435456
  Mount-cache hash table entries: 8388608
  Mountpoint-cache hash table entries: 8388608
  CPU: Physical Processor ID: 0
  Total time: 3.245s

After fix:
  Dentry cache hash table entries: 536870912
  Inode-cache hash table entries: 268435456
  Mount-cache hash table entries: 8388608
  Mountpoint-cache hash table entries: 8388608
  CPU: Physical Processor ID: 0
  Total time: 3.244s

Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 16:24:33 -07:00
David Howells dd111b31e9 VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Clean up line terminal whitespace in fs/namespace.c and fs/super.c.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-06 03:27:09 -04:00
Linus Torvalds e5f76a2e0e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull mnt namespace updates from Eric Biederman:
 "A big break-through came during this development cycle as a way was
  found to maintain the existing umount -l semantics while allowing for
  optimizations that improve the performance. That is represented by the
  first change in this series moving the reparenting of mounts into
  their own pass. This has allowed addressing the horrific performance
  of umount -l on a carefully crafted tree of mounts with locks held
  (0.06s vs 60s in my testing). What allowed this was not changing where
  umounts propagate to while propgating umounts.

  The next change fixes the case where the order of the mount whose
  umount are being progated visits a tree where the mounts are stacked
  upon each other in another order. This is weird but not hard to
  implement.

  The final change takes advantage of the unchanging mount propgation
  tree to skip parts of the mount propgation tree that have already been
  visited. Yielding a very nice speed up in the worst case.

  There remains one outstanding question about the semantics of umount -l
  that I am still discussiong with Ram Pai. In practice that area of the
  semantics was changed by 1064f874ab ("mnt: Tuck mounts under others
  instead of creating shadow/side mounts.") and no regressions have been
  reported. Still I intend to finish talking that out with him to ensure
  there is not something a more intense use of mount propagation in the
  future will not cause to become significant"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Make propagate_umount less slow for overlapping mount propagation trees
  mnt: In propgate_umount handle visiting mounts in any order
  mnt: In umount propagation reparent in a separate pass
2017-07-05 17:00:56 -07:00
Andrei Vagin 4068367c9c fs: don't forget to put old mntns in mntns_install
Fixes: 4f757f3cbf ("make sure that mntns_install() doesn't end up with referral for root")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-15 06:53:05 -04:00
Eric W. Biederman 99b19d1647 mnt: In propgate_umount handle visiting mounts in any order
While investigating some poor umount performance I realized that in
the case of overlapping mount trees where some of the mounts are locked
the code has been failing to unmount all of the mounts it should
have been unmounting.

This failure to unmount all of the necessary
mounts can be reproduced with:

$ cat locked_mounts_test.sh

mount -t tmpfs test-base /mnt
mount --make-shared /mnt
mkdir -p /mnt/b

mount -t tmpfs test1 /mnt/b
mount --make-shared /mnt/b
mkdir -p /mnt/b/10

mount -t tmpfs test2 /mnt/b/10
mount --make-shared /mnt/b/10
mkdir -p /mnt/b/10/20

mount --rbind /mnt/b /mnt/b/10/20

unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi'
sleep 1
umount -l /mnt/b
wait %%

$ unshare -Urm ./locked_mounts_test.sh

This failure is corrected by removing the prepass that marks mounts
that may be umounted.

A first pass is added that umounts mounts if possible and if not sets
mount mark if they could be unmounted if they weren't locked and adds
them to a list to umount possibilities.  This first pass reconsiders
the mounts parent if it is on the list of umount possibilities, ensuring
that information of umoutability will pass from child to mount parent.

A second pass then walks through all mounts that are umounted and processes
their children unmounting them or marking them for reparenting.

A last pass cleans up the state on the mounts that could not be umounted
and if applicable reparents them to their first parent that remained
mounted.

While a bit longer than the old code this code is much more robust
as it allows information to flow up from the leaves and down
from the trunk making the order in which mounts are encountered
in the umount propgation tree irrelevant.

Cc: stable@vger.kernel.org
Fixes: 0c56fe3142 ("mnt: Don't propagate unmounts to locked mounts")
Reviewed-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:41:16 -05:00
Eric W. Biederman 570487d3fa mnt: In umount propagation reparent in a separate pass
It was observed that in some pathlogical cases that the current code
does not unmount everything it should.  After investigation it
was determined that the issue is that mnt_change_mntpoint can
can change which mounts are available to be unmounted during mount
propagation which is wrong.

The trivial reproducer is:
$ cat ./pathological.sh

mount -t tmpfs test-base /mnt
cd /mnt
mkdir 1 2 1/1
mount --bind 1 1
mount --make-shared 1
mount --bind 1 2
mount --bind 1/1 1/1
mount --bind 1/1 1/1
echo
grep test-base /proc/self/mountinfo
umount 1/1
echo
grep test-base /proc/self/mountinfo

$ unshare -Urm ./pathological.sh

The expected output looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

The output without the fix looks like:
46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000
47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000
52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000

That last mount in the output was in the propgation tree to be unmounted but
was missed because the mnt_change_mountpoint changed it's parent before the walk
through the mount propagation tree observed it.

Cc: stable@vger.kernel.org
Fixes: 1064f874ab ("mnt: Tuck mounts under others instead of creating shadow/side mounts.")
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-05-23 08:40:32 -05:00
Linus Torvalds 050453295f Merge branch 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Making sure that something like a referral point won't end up as pwd
  or root.

  The main part is the last commit (fixing mntns_install()); that one
  fixes a hard-to-hit race. The fchdir() commit is making fchdir(2) a
  bit more robust - it should be impossible to get opened files (even
  O_PATH ones) for referral points in the first place, so the existing
  checks are OK, but checking the same thing as in chdir(2) is just as
  cheap.

  The path_init() commit removes a redundant check that shouldn't have
  been there in the first place"

* 'work.sane_pwd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that mntns_install() doesn't end up with referral for root
  path_init(): don't bother with checking MAY_EXEC for LOOKUP_ROOT
  make sure that fchdir() won't accept referral points, etc.
2017-05-12 11:39:59 -07:00
Al Viro 4f757f3cbf make sure that mntns_install() doesn't end up with referral for root
new flag: LOOKUP_DOWN.  If the starting point is overmounted, cross
into whatever's mounted on top, triggering referrals et.al.

Use that instead of follow_down_one() loop in mntns_install(), handle
errors properly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-21 14:05:36 -04:00
Jan Kara 08991e83b7 fsnotify: Free fsnotify_mark_connector when there is no mark attached
Currently we free fsnotify_mark_connector structure only when inode /
vfsmount is getting freed. This can however impose noticeable memory
overhead when marks get attached to inodes only temporarily. So free the
connector structure once the last mark is detached from the object.
Since notification infrastructure can be working with the connector
under the protection of fsnotify_mark_srcu, we have to be careful and
free the fsnotify_mark_connector only after SRCU period passes.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10 17:37:35 +02:00
Jan Kara 9dd813c15b fsnotify: Move mark list head from object into dedicated structure
Currently notification marks are attached to object (inode or vfsmnt) by
a hlist_head in the object. The list is also protected by a spinlock in
the object. So while there is any mark attached to the list of marks,
the object must be pinned in memory (and thus e.g. last iput() deleting
inode cannot happen). Also for list iteration in fsnotify() to work, we
must hold fsnotify_mark_srcu lock so that mark itself and
mark->obj_list.next cannot get freed. Thus we are required to wait for
response to fanotify events from userspace process with
fsnotify_mark_srcu lock held. That causes issues when userspace process
is buggy and does not reply to some event - basically the whole
notification subsystem gets eventually stuck.

So to be able to drop fsnotify_mark_srcu lock while waiting for
response, we have to pin the mark in memory and make sure it stays in
the object list (as removing the mark waiting for response could lead to
lost notification events for groups later in the list). However we don't
want inode reclaim to block on such mark as that would lead to system
just locking up elsewhere.

This commit is the first in the series that paves way towards solving
these conflicting lifetime needs. Instead of anchoring the list of marks
directly in the object, we anchor it in a dedicated structure
(fsnotify_mark_connector) and just point to that structure from the
object. The following commits will also add spinlock protecting the list
and object pointer to the structure.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-10 17:37:34 +02:00