Create directory /sys/fs/btrfs/UUID/devinfo to hold devices directories
by the id (unlike /devices).
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New sysfs attributes that track the filesystem status of devices, stored
in the per-filesystem directory in /sys/fs/btrfs/FSID/devinfo . There's
a directory for each device, with name corresponding to the numerical
device id.
in_fs_metadata - device is in the list of fs metadata
missing - device is missing (no device node or block device)
replace_target - device is target of replace
writeable - writes from fs are allowed
These attributes reflect the state of the device::dev_state and created
at mount time.
Sample output:
$ pwd
/sys/fs/btrfs/6e1961f1-5918-4ecc-a22f-948897b409f7/devinfo/1/
$ ls
in_fs_metadata missing replace_target writeable
$ cat missing
0
The output from these attributes are 0 or 1. 0 indicates unset and 1
indicates set. These attributes are readonly.
It is observed that the device delete thread and sysfs read thread will
not race because the delete thread calls sysfs kobject_put() which in
turn waits for existing sysfs read to complete.
Note for device replace devid swap:
During the replace the target device temporarily assumes devid 0 before
assigning the devid of the soruce device.
In btrfs_dev_replace_finishing() we remove source sysfs devid using the
function btrfs_sysfs_remove_devices_attr(), so after that call
kobject_rename() to update the devid in the sysfs. This adds and calls
btrfs_sysfs_update_devid() helper function to update the device id.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of how much we are discarding and how often we are reusing
with async discard. The discard_*_bytes values don't need any special
protection because the work item provides the single threaded access.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Expose max_discard_size as a tunable via sysfs and switch the current
fixed maximum to the default value.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Provide the ability to rate limit based on kbps in addition to iops as
additional guides for the target discard rate. The delay used ends up
being max(kbps_delay, iops_delay).
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
An earlier patch keeps track of discardable_extents. These are
undiscarded extents managed by the free space cache. Here, we will use
this to dynamically calculate the discard delay interval.
There are 3 rate to consider. The first is the target convergence rate,
the rate to discard all discardable_extents over the
BTRFS_DISCARD_TARGET_MSEC time frame. This is clamped by the lower
limit, the iops limit or BTRFS_DISCARD_MIN_DELAY (1ms), and the upper
limit, BTRFS_DISCARD_MAX_DELAY (1s). We reevaluate this delay every
transaction commit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep track of this metric so that we can understand how ahead or behind
we are in discarding rate. This uses the same accounting method as
discardable_extents, deltas between previous/current values and
propagating them up.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The number of discardable extents will serve as the rate limiting metric
for how often we should discard. This keeps track of discardable extents
in the free space caches by maintaining deltas and propagating them to
the global count.
The deltas are calculated from 2 values stored in PREV and CURR entries,
then propagated up to the global discard ctl. The current counter value
becomes the previous counter value after update.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Setup base sysfs directory for discard stats + tunables.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs only allowed attributes to be exposed in debug/. Let's let other
groups be created by making debug its own kobject.
This also makes the per-fs debug options separate from the global
features mount attributes. This seems to be needed as
sysfs_create_files() requires const struct attribute * while
sysfs_create_group() can take struct attribute *. This seems nicer as
per file system, you'll probably use to_fs_info().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We probably should call sysfs_remove_group() on debug/.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Merge btrfs_sysfs_add_fsid() and btrfs_sysfs_add_devices_kobj() functions
as these two are small and they are called one after the other.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_sysfs_add_device() creates the directory
/sys/fs/btrfs/UUID/devices but its function name is misleading. Rename
it to btrfs_sysfs_add_devices_kobj() instead. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 24bd69cb ("Btrfs: sysfs: add support to add parent for fsid")
added parent argument in preparation to show the seed fsid under the
sprout fsid as in the patch [1] in the mailing list.
[1] Btrfs: sysfs: support seed devices in the sysfs layout
But later this idea was superseded by another idea to rename the fsid as
in the commit f93c39970b ("btrfs: factor out sysfs code for updating
sprout fsid").
So we don't need parent argument anymore.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The struct member btrfs_device::device_dir_kobj holds the kobj of the
sysfs directory /sys/fs/btrfs/UUID/devices, so rename it from
device_dir_kobj to devices_kobj. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Show the used driver for the checksum algorithm for the filesystem in
sysfs file /sys/fs/btrfs/UUID/features/checksum, eg.
crc32c (crc32c-generic)
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export supported checksum algorithms via sysfs in the list of static
features:
/sys/fs/btrfs/features/supported_checksums
Space spearated list of checksum algorithm names.
Co-developed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The kobject should be pulled in via sysfs.h and that needs to include it
because it needs various definitions like kobj_attribute or kobject.
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers to create block group and space info directories already
live in sysfs.c, move the deletion part there too.
Signed-off-by: David Sterba <dsterba@suse.com>
The last non-sysfs usage of space_info_ktype has been moved to a private
helper in previous patch so the variable can be made static.
Signed-off-by: David Sterba <dsterba@suse.com>
The last non-sysfs usage of btrfs_raid_ktype has been moved to a private
helper in previous patch so the variable can be made static.
Signed-off-by: David Sterba <dsterba@suse.com>
The part of link_block_group that just creates the sysfs object is
independent and can be factored out to a helper.
Signed-off-by: David Sterba <dsterba@suse.com>
Add 'debug' directories to global sysfs and per-filesystem. This will
replace the debugfs directory. The sysfs location is simpler and builds
on top of the existing file hierarchy so there will hopefully be no more
questions about the sample debugfs file.
The directory is called 'debug' and only present under
CONFIG_BTRFS_DEBUG so this will not affect productions builds.
Signed-off-by: David Sterba <dsterba@suse.com>
This is prep work for moving all of the block group cache code into its
own file.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=eshk
-----END PGP SIGNATURE-----
Merge tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Highlights:
- chunks that have been trimmed and unchanged since last mount are
tracked and skipped on repeated trims
- use hw assissed crc32c on more arches, speedups if native
instructions or optimized implementation is available
- the RAID56 incompat bit is automatically removed when the last
block group of that type is removed
Fixes:
- fsync fix for reflink on NODATACOW files that could lead to ENOSPC
- fix data loss after inode eviction, renaming it, and fsync it
- fix fsync not persisting dentry deletions due to inode evictions
- update ctime/mtime/iversion after hole punching
- fix compression type validation (reported by KASAN)
- send won't be allowed to start when relocation is in progress, this
can cause spurious errors or produce incorrect send stream
Core:
- new tracepoints for space update
- tree-checker: better check for end of extents for some tree items
- preparatory work for more checksum algorithms
- run delayed iput at unlink time and don't push the work to cleaner
thread where it's not properly throttled
- wrap block mapping to structures and helpers, base for further
refactoring
- split large files, part 1:
- space info handling
- block group reservations
- delayed refs
- delayed allocation
- other cleanups and refactoring"
* tag 'for-5.3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (103 commits)
btrfs: fix memory leak of path on error return path
btrfs: move the subvolume reservation stuff out of extent-tree.c
btrfs: migrate the delalloc space stuff to it's own home
btrfs: migrate btrfs_trans_release_chunk_metadata
btrfs: migrate the delayed refs rsv code
btrfs: Evaluate io_tree in find_lock_delalloc_range()
btrfs: migrate the global_block_rsv helpers to block-rsv.c
btrfs: migrate the block-rsv code to block-rsv.c
btrfs: stop using block_rsv_release_bytes everywhere
btrfs: cleanup the target logic in __btrfs_block_rsv_release
btrfs: export __btrfs_block_rsv_release
btrfs: export btrfs_block_rsv_add_bytes
btrfs: move btrfs_block_rsv definitions into it's own header
btrfs: Simplify update of space_info in __reserve_metadata_bytes()
btrfs: unexport can_overcommit
btrfs: move reserve_metadata_bytes and supporting code to space-info.c
btrfs: move dump_space_info to space-info.c
btrfs: export block_rsv_use_bytes
btrfs: move btrfs_space_info_add_*_bytes to space-info.c
btrfs: move the space info update macro to space-info.h
...
Migrate the struct definition and the one helper that's in ctree.h into
space-info.h
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs fields in
btrfs_raid_ktype and space_info_ktype with default_groups.
Change "raid_attributes" to "raid_attrs", and use the ATTRIBUTE_GROUPS
macro to create raid_groups and space_info_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A failed call to kobject_init_and_add() must be followed by a call to
kobject_put(). Currently in the error path when adding fs_devices we
are missing this call. This could be fixed by calling
btrfs_sysfs_remove_fsid() if btrfs_sysfs_add_fsid() returns an error or
by adding a call to kobject_put() directly in btrfs_sysfs_add_fsid().
Here we choose the second option because it prevents the slightly
unusual error path handling requirements of kobject from leaking out
into btrfs functions.
Add a call to kobject_put() in the error path of kobject_add_and_init().
This causes the release method to be called if kobject_init_and_add()
fails. open_tree() is the function that calls btrfs_sysfs_add_fsid()
and the error code in this function is already written with the
assumption that the release method is called during the error path of
open_tree() (as seen by the call to btrfs_sysfs_remove_fsid() under the
fail_fsdev_sysfs label).
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the metadata_uuid is a new incompat feature it requires the
respective sysfs hooks. This patch adds the 'metdata_uuid' feature to
be shown if it supported by the kernel. Additionally it adds
/sys/fs/btrfs/UUID/metadata_uuid attribute which allows one to read
the current metadata_uuid.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Deletion of a subvolume by rmdir(2) has become allowed by the
'commit cd2decf640b1 ("btrfs: Allow rmdir(2) to delete an empty
subvolume")'.
It is a kind of new feature and this commits add a sysfs entry
/sys/fs/btrfs/features/rmdir_subvol
to indicate the availability of the feature so that a user program
(e.g. fstests) can detect it.
Prior to this commit, all entries in /sys/fs/btrfs/features are feature
which depend on feature bits of superblock (i.e. each feature affects
on-disk format) and managed by attribute_group "btrfs_feature_attr_group".
For each fs, entries in /sys/fs/btrfs/UUID/features indicate which
features are enabled (or can be changed online) for the fs.
However, rmdir_subvol feature only depends on kernel module. Therefore
new attribute_group "btrfs_static_feature_attr_group" is introduced and
sysfs_merge_group() is used to share /sys/fs/btrfs/features directory.
Features in "btrfs_static_feature_attr_group" won't be listed in each
/sys/fs/btrfs/UUID/features.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use existing named values instead of the raw numbers.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_fs_devices::list is the list of BTRFS fsid in the kernel, a generic
name 'list' makes it's search very difficult, rename it to fs_list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
Any time the first block group of a new type is created, we add a new
kobject to sysfs to hold the attributes for that type. Kobject-internal
allocations always use GFP_KERNEL, making them prone to fs-reclaim races.
While it appears as if this can occur any time a block group is created,
the only times the first block group of a new type can be created in
memory is at mount and when we create the first new block group during
raid conversion.
This patch adds a new list to track pending kobject additions and then
handles them after we do chunk relocation. Between relocating the
target chunk (or forcing allocation of a new chunk in the case of data)
and removing the old chunk, we're in a safe place for fs-reclaim to
occur. We're holding the volume mutex, which is already held across
page faults, and the delete_unused_bgs_mutex, which will only stall
the cleaner thread.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The __cold functions are placed to a special section, as they're
expected to be called rarely. This could help i-cache prefetches or help
compiler to decide which branches are more/less likely to be taken
without any other annotations needed.
Though we can't add more __exit annotations, it's still possible to add
__cold (that's also added with __exit). That way the following function
categories are tagged:
- printf wrappers, error messages
- exit helpers
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 3c181c12c4.
The offending patch was merged in 4.16-rc4 and was promptly applied to
stable kernels 4.14.25 and 4.15.8.
The patch causes a corruption in several superblock items on big-endian
machines because of messed up endianity conversions. The damage is
manually repairable. A filesystem cannot be mounted again after it has
been unmounted once.
We do a full revert and not a fixup so stable can pick that patch ASAP.
Fixes: 3c181c12c4 ("btrfs: use proper endianness accessors for super_copy")
Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de
CC: stable@vger.kernel.org # 4.14+
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info::super_copy is a byte copy of the on-disk structure and all
members must use the accessor macros/functions to obtain the right
value. This was missing in update_super_roots and in sysfs readers.
Moving between opposite endianness hosts will report bogus numbers in
sysfs, and mount may fail as the root will not be restored correctly. If
the filesystem is always used on a same endian host, this will not be a
problem.
Fix this by using the btrfs_set_super...() functions to set
fs_info::super_copy values, and for the sysfs, use the cached
fs_info::nodesize/sectorsize values.
CC: stable@vger.kernel.org
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Adding __init macro gives kernel a hint that this function is only used
during the initialization phase and its memory resources can be freed up
after.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently struct names for sysfs are generated only based on the
attribute names. This means that attribute names cannot be reused in
multiple places throughout the complete btrfs sysfs hierarchy.
E.g. allocation/data/total_bytes and allocation/data/single/total_bytes
result in the same struct name btrfs_attr_total_bytes. A workaround for
this case was made in the past by ad hoc creating an extra macro
wrapper, BTRFS_RAID_ATTR, that inserts some extra text in the struct
name.
Instead of polluting sysfs.h with such kind of extra macro definitions,
and only doing so when there are collisions, use a prefix which gets
inserted in the struct name, so we keep everything nicely grouped
together by default.
Current collections of attributes are:
* (the toplevel, empty prefix)
* allocation
* space_info
* raid
* features
Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Add zstd compression and decompression support to BtrFS. zstd at its
fastest level compresses almost as well as zlib, while offering much
faster compression and decompression, approaching lzo speeds.
I benchmarked btrfs with zstd compression against no compression, lzo
compression, and zlib compression. I benchmarked two scenarios. Copying
a set of files to btrfs, and then reading the files. Copying a tarball
to btrfs, extracting it to btrfs, and then reading the extracted files.
After every operation, I call `sync` and include the sync time.
Between every pair of operations I unmount and remount the filesystem
to avoid caching. The benchmark files can be found in the upstream
zstd source repository under
`contrib/linux-kernel/{btrfs-benchmark.sh,btrfs-extract-benchmark.sh}`
[1] [2].
I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD.
The first compression benchmark is copying 10 copies of the unzipped
Silesia corpus [3] into a BtrFS filesystem mounted with
`-o compress-force=Method`. The decompression benchmark times how long
it takes to `tar` all 10 copies into `/dev/null`. The compression ratio is
measured by comparing the output of `df` and `du`. See the benchmark file
[1] for details. I benchmarked multiple zstd compression levels, although
the patch uses zstd level 1.
| Method | Ratio | Compression MB/s | Decompression speed |
|---------|-------|------------------|---------------------|
| None | 0.99 | 504 | 686 |
| lzo | 1.66 | 398 | 442 |
| zlib | 2.58 | 65 | 241 |
| zstd 1 | 2.57 | 260 | 383 |
| zstd 3 | 2.71 | 174 | 408 |
| zstd 6 | 2.87 | 70 | 398 |
| zstd 9 | 2.92 | 43 | 406 |
| zstd 12 | 2.93 | 21 | 408 |
| zstd 15 | 3.01 | 11 | 354 |
The next benchmark first copies `linux-4.11.6.tar` [4] to btrfs. Then it
measures the compression ratio, extracts the tar, and deletes the tar.
Then it measures the compression ratio again, and `tar`s the extracted
files into `/dev/null`. See the benchmark file [2] for details.
| Method | Tar Ratio | Extract Ratio | Copy (s) | Extract (s)| Read (s) |
|--------|-----------|---------------|----------|------------|----------|
| None | 0.97 | 0.78 | 0.981 | 5.501 | 8.807 |
| lzo | 2.06 | 1.38 | 1.631 | 8.458 | 8.585 |
| zlib | 3.40 | 1.86 | 7.750 | 21.544 | 11.744 |
| zstd 1 | 3.57 | 1.85 | 2.579 | 11.479 | 9.389 |
[1] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-benchmark.sh
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/btrfs-extract-benchmark.sh
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.11.6.tar.xz
zstd source repository: https://github.com/facebook/zstd
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
This patch adds the read-write attribute quota_override into sysfs.
Any process which has CAP_SYS_RESOURCE can set this flag to on, and
once it is set to true, processes with CAP_SYS_RESOURCE can exceed
the quota.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor changelog edits ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch converts printk(KERN_* style messages to use the pr_* versions.
One side effect is that anything that was KERN_DEBUG is now automatically
a dynamic debug message.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
CodingStyle chapter 2:
"[...] never break user-visible strings such as printk messages,
because that breaks the ability to grep for them."
This patch unsplits user-visible strings.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs provides a helpful demonstration of how to export
a global variable via debugfs; however, it is unique among
other debugfs files in that it is world-writable, which causes
some concern to people who are not familiar with its purpose.
Fix it so that it is only user-writable.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the label setting ioctl races with sysfs label handler, we could get
mixed result in the output, part old part new. We should either get the
old or new label. The chances to hit this race are low.
Signed-off-by: David Sterba <dsterba@suse.com>
Add a sanity check for the fs_info as we will dereference it, similar to
what the 'store features' handler does.
Signed-off-by: David Sterba <dsterba@suse.com>
If the mount phase is not finished, we can't update the sysfs files.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount. We're
going to sync them and need a helper to do that.
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit representing the newly added free space tree feature is
missing. Right now it will be listed only among features supported by
the module, not per-fs.
Signed-off-by: David Sterba <dsterba@suse.com>
To support seed sysfs layout and represent seed fsid under
the sprout we need the facility to create fsid under the
specified parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_kobj_add_device() does not need fs_info any more.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Just a helper function to clean up the sysfs fsid kobjects.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch will provide a framework and help to create attributes
from the structure btrfs_fs_devices which are available even before
fs_info is created. So by moving the parent kobject super_kobj from
fs_info to btrfs_fs_devices, it will help to create attributes
from the btrfs_fs_devices as well.
Patches on top of this patch now will be able to create the
sys/fs/btrfs/fsid kobject and attributes from btrfs_fs_devices
when devices are scanned and registered to the kernel.
Just to note, this does not change any of the existing btrfs sysfs
external kobject names and its attributes and not even the life
cycle of them. Changes are internal only. And to ensure the same,
this path has been tested with various device operations and,
checking and comparing the sysfs kobjects and attributes with
sysfs kobject and attributes with out this patch, and they remain
same.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Separate device kobject and its attribute creation so that device
kobject can be created from the device discovery thread.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now btrfs_attrs are provided using the default_attrs through
the kset. Separate them and create the default_attrs using the
sysfs_create_files instead. By doing this we will have the
flexibility that device discovery thread could create fsid
kobject.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We need it in a seperate function so that it can be called from the
device discovery thread as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now the order in which the kobjects are created
at btrfs_sysfs_add_one() is..
fsid
features
unknown features (dynamic features)
devices.
Since we would move fsid and device kobject to fs_devices
from fs_info structure, this patch will reorder in which
the kobjects are created as below.
fsid
devices
features
unknown features (dynamic features)
And hence the btrfs_sysfs_remove_one() will follow the same
in reverse order. and the device kobject destroy now can
be moved into the function __btrfs_sysfs_remove_one()
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since the failure code in the btrfs_sysfs_add_one() can
call btrfs_sysfs_remove_one() even before device_dir_kobj
has been created we need to check if its null.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The sysfs clean up self test like in the below code fails, since
fs_info->device_dir_kobject still points to its stale kobject.
Reseting this pointer will help to fix this.
open_ctree()
{
ret = btrfs_sysfs_add_one(fs_info);
::
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Theoritically need to remove the device links attributes, but since its entire device
kobject was removed, so there wasn't any issue of about it. Just do it nicely.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The following test case fails indicating that, thread tried to init an initialized object.
kernel: [232104.016513] kobject (ffff880006c1c980): tried to init an initialized object, something is seriously wrong.
btrfs_sysfs_remove_one() self test code:
open_tree()
{
::
ret = btrfs_sysfs_add_one(fs_info);
if (ret) {
pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
goto fail_block_groups;
}
+ btrfs_sysfs_remove_one(fs_info);
+ ret = btrfs_sysfs_add_one(fs_info);
+ if (ret) {
+ pr_err("BTRFS: failed to init sysfs interface: %d\n", ret);
+ goto fail_block_groups;
+ }
cleaning up the unregistered kobject fixes this.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
There are some op tables that can be easily made const, similarly the
sysfs feature and raid tables. This is motivated by PaX CONSTIFY plugin.
Signed-off-by: David Sterba <dsterba@suse.cz>
BTRFS_ATTR_RW could set the mode and be inline with BTRFS_ATTR
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
All that uses BTRFS_ATTR want mode to be set at 0444 so just do
it at the define. And few spacing alignments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Anand Jain
Dennis Zhou
David Sterba
Johannes Thumshirn
Josef Bacik
Linus Torvalds
Kimberly Brown
Greg Kroah-Hartman
Tobin C. Harding
Nikolay Borisov
Misono Tomohiro
Jeff Mahoney
Liu Bo
Hans van Kranenburg
Nick Terrell
David Howells
Sargun Dhillon
Eric Sandeen
Wang Xiaoguang
David Sterba
Filipe Manana
Satoru Takeuchi