Relax the condition that overlayfs supports nfs export, to require
that i_ino is consistent with st_ino/d_ino.
It is enough to require that st_ino and d_ino are consistent.
This fixes the failure of xfstest generic/504, due to mismatch of
st_ino to inode number in the output of /proc/locks.
Fixes: 12574a9f4c ("ovl: consistent i_ino for non-samefs with xino")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Change first argument to MODULE_PARM_DESC() calls, that each of them
matched the actual module parameter name. The matching results in
changing (the 'parm' section from) the output of `modinfo overlay` from:
parm: ovl_check_copy_up:Obsolete; does nothing
parm: redirect_max:ushort
parm: ovl_redirect_max:Maximum length of absolute redirect xattr value
parm: redirect_dir:bool
parm: ovl_redirect_dir_def:Default to on or off for the redirect_dir feature
parm: redirect_always_follow:bool
parm: ovl_redirect_always_follow:Follow redirects even if redirect_dir feature is turned off
parm: index:bool
parm: ovl_index_def:Default to on or off for the inodes index feature
parm: nfs_export:bool
parm: ovl_nfs_export_def:Default to on or off for the NFS export feature
parm: xino_auto:bool
parm: ovl_xino_auto_def:Auto enable xino feature
parm: metacopy:bool
parm: ovl_metacopy_def:Default to on or off for the metadata only copy up feature
into:
parm: check_copy_up:Obsolete; does nothing
parm: redirect_max:Maximum length of absolute redirect xattr value (ushort)
parm: redirect_dir:Default to on or off for the redirect_dir feature (bool)
parm: redirect_always_follow:Follow redirects even if redirect_dir feature is turned off (bool)
parm: index:Default to on or off for the inodes index feature (bool)
parm: nfs_export:Default to on or off for the NFS export feature (bool)
parm: xino_auto:Auto enable xino feature (bool)
parm: metacopy:Default to on or off for the metadata only copy up feature (bool)
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
gcc gets a bit confused by the logic in ovl_setup_trap() and
can't figure out whether the local 'trap' variable in the caller
was initialized or not:
fs/overlayfs/super.c: In function 'ovl_fill_super':
fs/overlayfs/super.c:1333:4: error: 'trap' may be used uninitialized in this function [-Werror=maybe-uninitialized]
iput(trap);
^~~~~~~~~~
fs/overlayfs/super.c:1312:17: note: 'trap' was declared here
Reword slightly to make it easier for the compiler to understand.
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
NFS mounts can be disconnected from fs root. Don't fail the overlapping
layer check because of this.
The check is not authoritative anyway, since topology can change during or
after the check.
Reported-by: Antti Antinoja <antti@fennosys.fi>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
The ioctl argument was parsed as the wrong type.
Fixes: b21d9c435f ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlapping overlay layers are not supported and can cause unexpected
behavior, but overlayfs does not currently check or warn about these
configurations.
User is not supposed to specify the same directory for upper and
lower dirs or for different lower layers and user is not supposed to
specify directories that are descendants of each other for overlay
layers, but that is exactly what this zysbot repro did:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Moving layer root directories into other layers while overlayfs
is mounted could also result in unexpected behavior.
This commit places "traps" in the overlay inode hash table.
Those traps are dummy overlay inodes that are hashed by the layers
root inodes.
On mount, the hash table trap entries are used to verify that overlay
layers are not overlapping. While at it, we also verify that overlay
layers are not overlapping with directories "in-use" by other overlay
instances as upperdir/workdir.
On lookup, the trap entries are used to verify that overlay layers
root inodes have not been moved into other layers after mount.
Some examples:
$ ./run --ov --samefs -s
...
( mkdir -p base/upper/0/u base/upper/0/w base/lower lower upper mnt
mount -o bind base/lower lower
mount -o bind base/upper upper
mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w)
$ umount mnt
$ mount -t overlay none mnt ...
-o lowerdir=base,upperdir=upper/0/u,workdir=upper/0/w
[ 94.434900] overlayfs: overlapping upperdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=upper/0/u,upperdir=upper/0/u,workdir=upper/0/w
[ 151.350132] overlayfs: conflicting lowerdir path
mount: none is already mounted or mnt busy
$ mount -t overlay none mnt ...
-o lowerdir=lower:lower/a,upperdir=upper/0/u,workdir=upper/0/w
[ 201.205045] overlayfs: overlapping lowerdir path
mount: mount overlay on mnt failed: Too many levels of symbolic links
$ mount -t overlay none mnt ...
-o lowerdir=lower,upperdir=upper/0/u,workdir=upper/0/w
$ mv base/upper/0/ base/lower/
$ find mnt/0
mnt/0
mnt/0/w
find: 'mnt/0/w/work': Too many levels of symbolic links
find: 'mnt/0/u': Too many levels of symbolic links
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
They are the extended version of FS_IOC_FS[SG]ETFLAGS ioctls.
xfs_io -c "chattr <flags>" uses the new ioctls for setting flags.
This used to work in kernel pre v4.19, before stacked file ops
introduced the ovl_ioctl whitelist.
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: d1d04ef857 ("ovl: stack file ops")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXNpu6gAKCRDh3BK/laaZ
PNYnAQCLMJBZp9AVKU+5onOGKLmgUfnbKZhWJYICW6DVKobo6AEA4aXBIk5TIDiu
+a3Ny0nAutdpHcRkbi8jJty91BeJgQg=
=iLSD
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
"Just bug fixes in this small update"
* tag 'ovl-update-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: relax WARN_ON() for overlapping layers use case
ovl: check the capability before cred overridden
ovl: do not generate duplicate fsnotify events for "fake" path
ovl: support stacked SEEK_HOLE/SEEK_DATA
ovl: fix missing upper fs freeze protection on copy up for ioctl
This nasty little syzbot repro:
https://syzkaller.appspot.com/x/repro.syz?x=12c7a94f400000
Creates overlay mounts where the same directory is both in upper and lower
layers. Simplified example:
mkdir foo work
mount -t overlay none foo -o"lowerdir=.,upperdir=foo,workdir=work"
The repro runs several threads in parallel that attempt to chdir into foo
and attempt to symlink/rename/exec/mkdir the file bar.
The repro hits a WARN_ON() I placed in ovl_instantiate(), which suggests
that an overlay inode already exists in cache and is hashed by the pointer
of the real upper dentry that ovl_create_real() has just created. At the
point of the WARN_ON(), for overlay dir inode lock is held and upper dir
inode lock, so at first, I did not see how this was possible.
On a closer look, I see that after ovl_create_real(), because of the
overlapping upper and lower layers, a lookup by another thread can find the
file foo/bar that was just created in upper layer, at overlay path
foo/foo/bar and hash the an overlay inode with the new real dentry as lower
dentry. This is possible because the overlay directory foo/foo is not
locked and the upper dentry foo/bar is in dcache, so ovl_lookup() can find
it without taking upper dir inode shared lock.
Overlapping layers is considered a wrong setup which would result in
unexpected behavior, but it shouldn't crash the kernel and it shouldn't
trigger WARN_ON() either, so relax this WARN_ON() and leave a pr_warn()
instead to cover all cases of failure to get an overlay inode.
The error returned from failure to insert new inode to cache with
inode_insert5() was changed to -EEXIST, to distinguish from the error
-ENOMEM returned on failure to get/allocate inode with iget5_locked().
Reported-by: syzbot+9c69c282adc4edd2b540@syzkaller.appspotmail.com
Fixes: 01b39dcc95 ("ovl: use inode_insert5() to hash a newly...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull misc dcache updates from Al Viro:
"Most of this pile is putting name length into struct name_snapshot and
making use of it.
The beginning of this series ("ovl_lookup_real_one(): don't bother
with strlen()") ought to have been split in two (separate switch of
name_snapshot to struct qstr from overlayfs reaping the trivial
benefits of that), but I wanted to avoid a rebase - by the time I'd
spotted that it was (a) in -next and (b) close to 5.1-final ;-/"
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
audit_compare_dname_path(): switch to const struct qstr *
audit_update_watch(): switch to const struct qstr *
inotify_handle_event(): don't bother with strlen()
fsnotify: switch send_to_group() and ->handle_event to const struct qstr *
fsnotify(): switch to passing const struct qstr * for file_name
switch fsnotify_move() to passing const struct qstr * for old_name
ovl_lookup_real_one(): don't bother with strlen()
sysv: bury the broken "quietly truncate the long filenames" logics
nsfs: unobfuscate
unexport d_alloc_pseudo()
We found that it return success when we set IMMUTABLE_FL flag to a file in
docker even though the docker didn't have the capability
CAP_LINUX_IMMUTABLE.
The commit d1d04ef857 ("ovl: stack file ops") and dab5ca8fd9 ("ovl: add
lsattr/chattr support") implemented chattr operations on a regular overlay
file. ovl_real_ioctl() overridden the current process's subjective
credentials with ofs->creator_cred which have the capability
CAP_LINUX_IMMUTABLE so that it will return success in
vfs_ioctl()->cap_capable().
Fix this by checking the capability before cred overridden. And here we
only care about APPEND_FL and IMMUTABLE_FL, so get these information from
inode.
[SzM: move check and call to underlying fs inside inode locked region to
prevent two such calls from racing with each other]
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs "fake" path is used for stacked file operations on underlying
files. Operations on files with "fake" path must not generate fsnotify
events with path data, because those events have already been generated at
overlayfs layer and because the reported event->fd for fanotify marks on
underlying inode/filesystem will have the wrong path (the overlayfs path).
Link: https://lore.kernel.org/linux-fsdevel/20190423065024.12695-1-jencce.kernel@gmail.com/
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Fixes: d1d04ef857 ("ovl: stack file ops")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlay file f_pos is the master copy that is preserved
through copy up and modified on read/write, but only real
fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
limitations that are more strict than ->s_maxbytes for specific
files, so we use the real file to perform seeks.
We do not call real fs for SEEK_CUR:0 query and for SEEK_SET:0
requests.
Fixes: d1d04ef857 ("ovl: stack file ops")
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Generalize the helper ovl_open_maybe_copy_up() and use it to copy up file
with data before FS_IOC_SETFLAGS ioctl.
The FS_IOC_SETFLAGS ioctl is a bit of an odd ball in vfs, which probably
caused the confusion. File may be open O_RDONLY, but ioctl modifies the
file. VFS does not call mnt_want_write_file() nor lock inode mutex, but
fs-specific code for FS_IOC_SETFLAGS does. So ovl_ioctl() calls
mnt_want_write_file() for the overlay file, and fs-specific code calls
mnt_want_write_file() for upper fs file, but there was no call for
ovl_want_write() for copy up duration which prevents overlayfs from copying
up on a frozen upper fs.
Fixes: dab5ca8fd9 ("ovl: add lsattr/chattr support")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a file has been copied up metadata only, and later data is copied up,
upper loses any security.capability xattr it has (underlying filesystem
clears it as upon file write).
From a user's point of view, this is just a file copy-up and that should
not result in losing security.capability xattr. Hence, before data copy
up, save security.capability xattr (if any) and restore it on upper after
data copy up is complete.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 0c28887493 ("ovl: A new xattr OVL_XATTR_METACOPY for file on upper")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a file with capability set (and hence security.capability xattr) is
written kernel clears security.capability xattr. For overlay, during file
copy up if xattrs are copied up first and then data is, copied up. This
means data copy up will result in clearing of security.capability xattr
file on lower has. And this can result into surprises. If a lower file has
CAP_SETUID, then it should not be cleared over copy up (if nothing was
actually written to file).
This also creates problems with chown logic where it first copies up file
and then tries to clear setuid bit. But by that time security.capability
xattr is already gone (due to data copy up), and caller gets -ENODATA.
This has been reported by Giuseppe here.
https://github.com/containers/libpod/issues/2015#issuecomment-447824842
Fix this by copying up data first and then metadta. This is a regression
which has been introduced by my commit as part of metadata only copy up
patches.
TODO: There will be some corner cases where a file is copied up metadata
only and later data copy up happens and that will clear security.capability
xattr. Something needs to be done about that too.
Fixes: bd64e57586 ("ovl: During copy up, first copy up metadata and then data")
Cc: <stable@vger.kernel.org> # v4.19+
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 007ea44892.
The commit broke some selinux-testsuite cases, and it looks like there's no
straightforward fix keeping the direction of this patch, so revert for now.
The original patch was trying to fix the consistency of permission checks, and
not an observed bug. So reverting should be safe.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When decoding a lower file handle, we first call ovl_check_origin_fh()
with connected=false to get any real lower dentry for overlay inode
cache lookup.
If the real dentry is a disconnected dir dentry, ovl_check_origin_fh()
is called again with connected=true to get a connected real dentry
and find the lower layer the real dentry belongs to.
If the first call returned a connected real dentry, we use it to
lookup an overlay connected dentry, but the first ovl_check_origin_fh()
call with connected=false did not check that the found dentry is under
the root of the layer (see ovl_acceptable()), it only checked that
the found dentry super block matches the uuid of the lower file handle.
In case there are multiple lower layers on the same fs and the found
dentry is not from the top most lower layer, using the layer index
returned from the first ovl_check_origin_fh() is wrong and we end
up failing to decode the file handle.
Fix this by always calling ovl_check_origin_fh() with connected=true
if we got a directory dentry in the first call.
Fixes: 8b58924ad5 ("ovl: lookup in inode cache first when decoding...")
Cc: <stable@vger.kernel.org> # v4.17
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Theodore Ts'o reported a v4.19 regression with docker-dropbox:
https://marc.info/?l=linux-fsdevel&m=154070089431116&w=2
"I was rebuilding my dropbox Docker container, and it failed in 4.19
with the following error:
...
dpkg: error: error creating new backup file \
'/var/lib/dpkg/status-old': Invalid cross-device link"
The problem did not reproduce with metacopy feature disabled.
The error was caused by insufficient credentials to set
"trusted.overlay.redirect" xattr on link of a metacopy file.
Reproducer:
echo Y > /sys/module/overlay/parameters/redirect_dir
echo Y > /sys/module/overlay/parameters/metacopy
cd /tmp
mkdir l u w m
chmod 777 l u
touch l/foo
ln l/foo l/link
chmod 666 l/foo
mount -t overlay none -olowerdir=l,upperdir=u,workdir=w m
su fsgqa
ln m/foo m/bar
[ 21.455823] overlayfs: failed to set redirect (-1)
ln: failed to create hard link 'm/bar' => 'm/foo':\
Invalid cross-device link
Reported-by: Theodore Y. Ts'o <tytso@mit.edu>
Reported-by: Maciej Zięba <maciekz82@gmail.com>
Fixes: 4120fe64dc ("ovl: Set redirect on upper inode when it is linked")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use
a common .remap_file_range method and supply generic bounds and sanity checking
functions that are shared with the data write path. The current VFS
infrastructure has problems with rlimit, LFS file sizes, file time stamps,
maximum filesystem file sizes, stripping setuid bits, etc and so they are
addressed in these commits.
We also introduce the ability for the ->remap_file_range methods to return short
clones so that clones for vfs_copy_file_range() don't get rejected if the entire
range can't be cloned. It also allows filesystems to sliently skip deduplication
of partial EOF blocks if they are not capable of doing so without requiring
errors to be thrown to userspace.
All existing filesystems are converted to user the new .remap_file_range method,
and both XFS and ocfs2 are modified to make use of the new generic checking
infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CE/A
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull vfs dedup fixes from Dave Chinner:
"This reworks the vfs data cloning infrastructure.
We discovered many issues with these interfaces late in the 4.19 cycle
- the worst of them (data corruption, setuid stripping) were fixed for
XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all
the problems was needed. That rework is the contents of this pull
request.
Rework the vfs_clone_file_range and vfs_dedupe_file_range
infrastructure to use a common .remap_file_range method and supply
generic bounds and sanity checking functions that are shared with the
data write path. The current VFS infrastructure has problems with
rlimit, LFS file sizes, file time stamps, maximum filesystem file
sizes, stripping setuid bits, etc and so they are addressed in these
commits.
We also introduce the ability for the ->remap_file_range methods to
return short clones so that clones for vfs_copy_file_range() don't get
rejected if the entire range can't be cloned. It also allows
filesystems to sliently skip deduplication of partial EOF blocks if
they are not capable of doing so without requiring errors to be thrown
to userspace.
Existing filesystems are converted to user the new remap_file_range
method, and both XFS and ocfs2 are modified to make use of the new
generic checking infrastructure"
* tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: remove [cm]time update from reflink calls
xfs: remove xfs_reflink_remap_range
xfs: remove redundant remap partial EOF block checks
xfs: support returning partial reflink results
xfs: clean up xfs_reflink_remap_blocks call site
xfs: fix pagecache truncation prior to reflink
ocfs2: remove ocfs2_reflink_remap_range
ocfs2: support partial clone range and dedupe range
ocfs2: fix pagecache truncation prior to reflink
ocfs2: truncate page cache for clone destination file before remapping
vfs: clean up generic_remap_file_range_prep return value
vfs: hide file range comparison function
vfs: enable remap callers that can handle short operations
vfs: plumb remap flags through the vfs dedupe functions
vfs: plumb remap flags through the vfs clone functions
vfs: make remap_file_range functions take and return bytes completed
vfs: remap helper should update destination inode metadata
vfs: pass remap flags to generic_remap_checks
vfs: pass remap flags to generic_remap_file_range_prep
vfs: combine the clone and dedupe into a single remap_file_range
...
Current behavior is to automatically disable metacopy if redirect_dir is
not enabled and proceed with the mount.
If "metacopy=on" mount option was given, then this behavior can confuse the
user: no mount failure, yet metacopy is disabled.
This patch makes metacopy=on imply redirect_dir=on.
The converse is also true: turning off full redirect with redirect_dir=
{off|follow|nofollow} will disable metacopy.
If both metacopy=on and redirect_dir={off|follow|nofollow} is specified,
then mount will fail, since there's no way to correctly resolve the
conflict.
Reported-by: Daniel Walsh <dwalsh@redhat.com>
Fixes: d5791044d2 ("ovl: Provide a mount option metacopy=on/off...")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it. This is a
reproducer:
mkdir lower upper work merge
touch lower/file
mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
rm merge/file
ls -al merge/file
rm upper/file
ls -al merge/
mkdir merge/file
Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.
Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e76 ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
Plumb a remap_flags argument through the vfs_dedupe_file_range_one
functions so that dedupe can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Plumb a remap_flags argument through the {do,vfs}_clone_file_range
functions so that clone can take advantage of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change the remap_file_range functions to take a number of bytes to
operate upon and return the number of bytes they operated on. This is a
requirement for allowing fs implementations to return short clone/dedupe
results to the user, which will enable us to obey resource limits in a
graceful manner.
A subsequent patch will enable copy_file_range to signal to the
->clone_file_range implementation that it can handle a short length,
which will be returned in the function's return value. For now the
short return is not implemented anywhere so the behavior won't change --
either copy_file_range manages to clone the entire range or it tries an
alternative.
Neither clone ioctl can take advantage of this, alas.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Combine the clone_file_range and dedupe_file_range operations into a
single remap_file_range file operation dispatch since they're
fundamentally the same operation. The differences between the two can
be made in the prep functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is no functional change but it seems better to get size by calling
posix_acl_xattr_size() instead of calling posix_acl_to_xattr() with
NULL buffer argument. Additionally, remove unnecessary assignments.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It just makes the interface strange without adding any significant value.
The only case where locked is false and return value is 0 is in
ovl_rename() when new is negative, so handle that case explicitly in
ovl_rename().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We use uuid to associate an overlay lower file handle with a lower layer,
so we can accept lower fs with null uuid as long as all lower layers with
null uuid are on the same fs.
This change allows enabling index and nfs_export features for the setup of
single lower fs of type squashfs - squashfs supports file handles, but has
a null uuid. This change also allows enabling index and nfs_export features
for nested overlayfs, where the lower overlay has nfs_export enabled.
Enabling the index feature with single lower squashfs fixes the
unionmount-testsuite test:
./run --ov --squashfs --verify
As a by-product, if, like the lower squashfs, upper fs also uses the
generic export_encode_fh() implementation to export 32bit inode file
handles (e.g. ext4), then the xino_auto config/module/mount option will
enable unique overlay inode numbers.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that the workdir and tmpfile copy up modes have been untagled, the
functions become simple enough that the helpers can be folded into the
callers.
Add new helpers where there is any duplication remaining: preparing creds
for creating the object.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In an attempt to dedup ~100 LOC, we ended up creating a tangled call chain,
whose branches merge and diverge in several points according to the
immutable c->tmpfile copy up mode.
This call chain was hard to analyse for locking correctness because the
locking requirements for the c->tmpfile flow were very different from the
locking requirements for the !c->tmpfile flow (i.e. directory vs. regulare
file copy up).
Split the copy up helpers of the c->tmpfile flow from those of the
!c->tmpfile (i.e. workdir) flow and remove the c->tmpfile mode from copy up
context.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Make permission checking more consistent:
- special files don't need any access check on underling fs
- exec permission check doesn't need to be performed on underlying fs
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().
~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/
WARNING: possible recursive locking detected
--------------------------------------------
ln/1545 is trying to acquire lock:
00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_copy_up_start+0x28/0x7d
but task is already holding lock:
0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
ovl_nlink_start+0x3c/0xc1
[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]
Reported-by: syzbot+3ef5c0d1a5cb0b21e6be@syzkaller.appspotmail.com
Fixes: 5f8415d6b8 ("ovl: persistent overlay inode nlink for...")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If security_inode_copy_up() fails, it should not set new_creds, so no need
for the cleanup (which would've Oops-ed anyway, due to old_creds being
NULL).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We hit a BUG on kfree of an ERR_PTR()...
Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com
Fixes: 8b88a2e640 ("ovl: verify upper root dir matches lower root dir")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Format has a typo: it was meant to be "%.*s", not "%*s". But at some point
callers grew nonprintable values as well, so use "%*pE" instead with a
maximized length.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3a1e819b4e ("ovl: store file handle of lower inode on copy up")
Cc: <stable@vger.kernel.org> # v4.12
Fixes the following sparse warning:
fs/overlayfs/inode.c:507:39: warning:
symbol 'ovl_aops' was not declared. Should it be static?
Fixes: 5b910bd615 ("ovl: fix GPF in swapfile_activate of file from overlayfs over xfs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 031a072a0b ("vfs: call vfs_clone_file_range() under freeze
protection") created a wrapper do_clone_file_range() around
vfs_clone_file_range() moving the freeze protection to former, so
overlayfs could call the latter.
The more common vfs practice is to call do_xxx helpers from vfs_xxx
helpers, where freeze protecction is taken in the vfs_xxx helper, so
this anomality could be a source of confusion.
It seems that commit 8ede205541 ("ovl: add reflink/copyfile/dedup
support") may have fallen a victim to this confusion -
ovl_clone_file_range() calls the vfs_clone_file_range() helper in the
hope of getting freeze protection on upper fs, but in fact results in
overlayfs allowing to bypass upper fs freeze protection.
Swap the names of the two helpers to conform to common vfs practice
and call the correct helpers from overlayfs and nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested by doing clone on overlayfs while upper xfs+reflink is frozen:
xfs_io -f /ovl/y
fsfreeze -f /xfs
xfs_io> reflink /ovl/x
Before the fix xfs_io enters xfs_reflink_remap_range() and blocks
in xfs_trans_alloc(). After the fix, xfs_io blocks outside xfs code
in ovl_clone_file_range().
Fixes: 8ede205541 ("ovl: add reflink/copyfile/dedup support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested by re-writing to an open overlayfs file while upper ext4 is frozen:
xfs_io -f /ovl/x
xfs_io> pwrite 0 4096
fsfreeze -f /ext4
xfs_io> pwrite 0 4096
WARNING: CPU: 0 PID: 1492 at fs/ext4/ext4_jbd2.c:53 \
ext4_journal_check_start+0x48/0x82
After the fix, the second write blocks in ovl_write_iter() and avoids
hitting WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE) in
ext4_journal_check_start().
Fixes: 2a92e07edc ("ovl: add ovl_write_iter()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The memory leak was detected by kmemleak when running xfstests
overlay/051,053
Fixes: caf70cb2ba ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_free_fs() dereferences ofs->workbasedir and ofs->upper_mnt in cases when
those might not have been initialized yet.
Fix the initialization order for these fields.
Reported-by: syzbot+c75f181dc8429d2eb887@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 95e6d4177c ("ovl: grab reference to workbasedir early")
Fixes: a9075cdb46 ("ovl: factor out ovl_free_fs() helper")
Since overlayfs implements stacked file operations, the underlying
filesystems are not supposed to be exposed to the overlayfs file,
whose f_inode is an overlayfs inode.
Assigning an overlayfs file to swap_file results in an attempt of xfs
code to dereference an xfs_inode struct from an ovl_inode pointer:
CPU: 0 PID: 2462 Comm: swapon Not tainted
4.18.0-xfstests-12721-g33e17876ea4e #3402
RIP: 0010:xfs_find_bdev_for_inode+0x23/0x2f
Call Trace:
xfs_iomap_swapfile_activate+0x1f/0x43
__se_sys_swapon+0xb1a/0xee9
Fix this by not assigning the real inode mapping to f_mapping, which
will cause swapon() to return an error (-EINVAL). Although it makes
sense not to allow setting swpafile on an overlayfs file, some users
may depend on it, so we may need to fix this up in the future.
Keeping f_mapping pointing to overlay inode mapping will cause O_DIRECT
open to fail. Fix this by installing ovl_aops with noop_direct_IO in
overlay inode mapping.
Keeping f_mapping pointing to overlay inode mapping will cause other
a_ops related operations to fail (e.g. readahead()). Those will be
fixed by follow up patches.
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: f7c72396d0 ("ovl: add O_DIRECT support")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
...otherwise there will be list corruption due to inode_sb_list_add() being
called for inode already on the sb list.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: e950564b97 ("vfs: don't evict uninitialized inode")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the bits are in patches before this. So it is time to enable the
metadata only copy up feature.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_copy_up() by default will only do metadata only copy up (if enabled).
That means when ovl_real_ioctl() calls ovl_real_file(), it will still get
the lower file (as ovl_real_file() opens data file and not metacopy). And
that means "chattr +i" will end up modifying lower inode.
There seem to be two ways to solve this.
A. Open metacopy file in ovl_real_ioctl() and do operations on that
B. Force full copy up when FS_IOC_SETFLAGS is called.
I am resorting to option B for now as it feels little safer option. If
there are performance issues due to this, we can revisit it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
truncate should copy up full file (and not do metacopy only), otherwise it
will be broken. For example, use truncate to increase size of a file so
that any read beyong existing size will return null bytes. If we don't
copy up full file, then we end up opening lower file and read from it only
reads upto the old size (and not new size after truncate). Hence to avoid
such situations, copy up data as well when file size changes.
So far it was being done by d_real(O_WRONLY) call in truncate() path. Now
that patch has been reverted. So force full copy up in ovl_setattr() if
size of file is changing.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we seem to check redirect only if upperdentry is found. But it
is possible that there is no upperdentry but later we found an index.
We need to check redirect on index as well and set it in
ovl_inode->redirect. Otherwise link code can assume that dentry does not
have redirect and place a new one which breaks things. In my testing
overlay/033 test started failing in xfstests. Following are the details.
For example do following.
$ mkdir lower upper work merged
- Make lower dir with 4 links.
$ echo "foo" > lower/l0.txt
$ ln lower/l0.txt lower/l1.txt
$ ln lower/l0.txt lower/l2.txt
$ ln lower/l0.txt lower/l3.txt
- Mount with index on and metacopy on.
$ mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work,\
index=on,metacopy=on none merged
- Link lower
$ ln merged/l0.txt merged/l4.txt
(This will metadata copy up of l0.txt and put an absolute redirect
/l0.txt)
$ echo 2 > /proc/sys/vm/drop/caches
$ ls merged/l1.txt
(Now l1.txt will be looked up. There is no upper dentry but there is
lower dentry and index will be found. We don't check for redirect on
index, hence ovl_inode->redirect will be NULL.)
- Link Upper
$ ln merged/l4.txt merged/l5.txt
(Lookup of l4.txt will use inode from l1.txt lookup which is still in
cache. It has ovl_inode->redirect NULL, hence link will put a new
redirect and replace /l0.txt with /l4.txt
- Drop caches.
echo 2 > /proc/sys/vm/drop_caches
- List l1.txt and it returns -ESTALE
$ ls merged/l0.txt
(It returns stale because, we found a metacopy of l0.txt in upper and it
has redirect l4.txt but there is no file named l4.txt in lower layer.
So lower data copy is not found and -ESTALE is returned.)
So problem here is that we did not process redirect on index. Check
redirect on index as well and then problem is fixed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When we create a hardlink to a metacopy upper file, first the redirect on
that inode. Path based lookup will not work with newly created link and
redirect will solve that issue.
Also use absolute redirect as two hardlinks could be in different
directores and relative redirect will not work.
I have not put any additional locking around setting redirects while
introducing redirects for non-dir files. For now it feels like existing
locking is sufficient. If that's not the case, we will have add more
locking. Following is my rationale about why do I think current locking
seems ok.
Basic problem for non-dir files is that more than on dentry could be
pointing to same inode and in theory only relying on dentry based locks
(d->d_lock) did not seem sufficient.
We set redirect upon rename and upon link creation. In both the paths for
non-dir file, VFS locks both source and target inodes (->i_rwsem). That
means vfs rename and link operations on same source and target can't he
happening in parallel (Even if there are multiple dentries pointing to same
inode). So that probably means that at a time on an inode, only one call
of ovl_set_redirect() could be working and we don't need additional locking
in ovl_set_redirect().
ovl_inode->redirect is initialized only when inode is created new. That
means it should not race with any other path and setting
ovl_inode->redirect should be fine.
Reading of ovl_inode->redirect happens in ovl_get_redirect() path. And
this called only in ovl_set_redirect(). And ovl_set_redirect() already
seemed to be protected using ->i_rwsem. That means ovl_set_redirect() and
ovl_get_redirect() on source/target inode should not make progress in
parallel and is mutually exclusive. Hence no additional locking required.
Now, only case where ovl_set_redirect() and ovl_get_redirect() could race
seems to be case of absolute redirects where ovl_get_redirect() has to
travel up the tree. In that case we already take d->d_lock and that should
be sufficient as directories will not have multiple dentries pointing to
same inode.
So given VFS locking and current usage of redirect, current locking around
redirect seems to be ok for non-dir as well. Once we have the logic to
remove redirect when metacopy file gets copied up, then we probably will
need additional locking.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Set redirect on metacopy files upon rename. This will help find data
dentry in lower dirs.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a dentry has copy up origin, we set flag OVL_PATH_ORIGIN. So far this
decision was easy that we had to check only for oe->numlower and if it is
non-zero, we knew there is copy up origin. (For non-dir we installed
origin dentry in lowerstack[0]).
But we don't create ORGIN xattr for broken hardlinks (index=off). And with
metacopy feature it is possible that we will install lowerstack[0] but
ORIGIN xattr is not there. It is data dentry of upper metacopy dentry
which has been found using regular name based lookup or using REDIRECT. So
with addition of this new case, just presence of oe->numlower is not
sufficient to guarantee that ORIGIN xattr is present.
So to differentiate between two cases, look at OVL_CONST_INO flag. If this
flag is set and upperdentry is there, that means it can be marked as type
ORIGIN. OVL_CONST_INO is not set if lower hardlink is broken or will be
broken over copy up.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add an ovl_inode flag OVL_CONST_INO. This flag signifies if inode number
will remain constant over copy up or not. This flag does not get updated
over copy up and remains unmodifed after setting once.
Next patch in the series will make use of this flag. It will basically
figure out if dentry is of type ORIGIN or not. And this can be derived by
this flag.
ORIGIN = (upperdentry && ovl_test_flag(OVL_CONST_INO, inode)).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now OVL_PATH_MERGE is used only for merged directories. But
conceptually, a metacopy dentry (backed by a lower data dentry) is a merged
entity as well.
So mark metacopy dentries as OVL_PATH_MERGE and ovl_rename() makes use of
this property later to set redirect on a metacopy file.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we rely on path based lookup for data origin of metacopy upper.
This will work only if upper has not been renamed. We solved this problem
already for merged directories using redirect. Use same logic for metacopy
files.
This patch just goes on to check redirects for metacopy files.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move some directory related code in else block. This is pure code
reorganization and no functionality change.
Next patch enables redirect processing on metacopy files and needs this
change. By keeping non-functional changes in a separate patch, next patch
looks much smaller and cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Metacopy dentry/inode is internal to overlay and is never exposed outside
of it. Exception is metacopy upper file used for fsync(). Modify d_real()
to look for dentries/inode which have data, but also allow matching upper
inode without data for the fsync case.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_open() should open file which contains data and not open metacopy
inode. With the introduction of metacopy inodes, with current
implementaion we will end up opening metacopy inode as well.
But there can be certain circumstances like ovl_fsync() where we want to
allow opening a metacopy inode instead.
Hence, change ovl_open_realfile() and and add extra parameter which
specifies whether to allow opening metacopy inode or not. If this
parameter is false, we look for data inode and open that.
This should allow covering both the cases.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add an helper to retrieve real data inode associated with overlay inode.
This helper will ignore all metacopy inodes and will return only the real
inode which has data.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now ovl_inode stores inode pointer for lower inode. This helps with
quickly getting lower inode given overlay inode (ovl_inode_lower()).
Now with metadata only copy-up, we can have metacopy inode in middle layer
as well and inode containing data can be different from ->lower. I need to
be able to open the real file in ovl_open_realfile() and for that I need to
quickly find the lower data inode.
Hence store lower data inode also in ovl_inode. Also provide an helper
ovl_inode_lowerdata() to access this field.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If an inode has been copied up metadata only, then we need to query the
number of blocks from lower and fill up the stat->st_blocks.
We need to be careful about races where we are doing stat on one cpu and
data copy up is taking place on other cpu. We want to return
stat->st_blocks either from lower or stable upper and not something in
between. Hence, ovl_has_upperdata() is called first to figure out whether
block reporting will take place from lower or upper.
We now support metacopy dentries in middle layer. That means number of
blocks reporting needs to come from lowest data dentry and this could be
different from lower dentry. Hence we end up making a separate
vfs_getxattr() call for metacopy dentries to get number of blocks.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we have the notion of data dentry and metacopy dentry.
ovl_dentry_lower() will return uppermost lower dentry, but it could be
either data or metacopy dentry. Now we support metacopy dentries in lower
layers so it is possible that lowerstack[0] is metacopy dentry while
lowerstack[1] is actual data dentry.
So add an helper which returns lowest most dentry which is supposed to be
data dentry.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
So far lower could not be a meta inode. So whenever it was time to copy up
data of a meta inode, we could copy it up from top most lower dentry.
But now lower itself can be a metacopy inode. That means data copy up
needs to take place from a data inode in metacopy inode chain. Find lower
data inode in the chain and use that for data copy up.
Introduced a helper called ovl_path_lowerdata() to find the lower data
inode chain.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This patch modifies ovl_lookup() and friends to lookup metacopy dentries.
It also allows for presence of metacopy dentries in lower layer.
During lookup, check for presence of OVL_XATTR_METACOPY and if not present,
set OVL_UPPERDATA bit in flags.
We don't support metacopy feature with nfs_export. So in nfs_export code,
we set OVL_UPPERDATA flag set unconditionally if upper inode exists.
Do not follow metacopy origin if we find a metacopy only inode and metacopy
feature is not enabled for that mount. Like redirect, this can have
security implications where an attacker could hand craft upper and try to
gain access to file on lower which it should not have to begin with.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we use goto out_nomem which assumes error code is -ENOMEM. But
there are other errors returned like -ESTALE as well. So instead of
out_nomem, use out_err which will do ERR_PTR(err). That way one can put
error code in err and jump to out_err.
This just code reorganization and no change of functionality.
I am about to add more code and this organization helps laying more code
and error paths on top of it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now we will have the capability to have upper inodes which might be only
metadata copy up and data is still on lower inode. So add a new xattr
OVL_XATTR_METACOPY to distinguish between two cases.
Presence of OVL_XATTR_METACOPY reflects that file has been copied up
metadata only and and data will be copied up later from lower origin. So
this xattr is set when a metadata copy takes place and cleared when data
copy takes place.
We also use a bit in ovl_inode->flags to cache OVL_UPPERDATA which reflects
whether ovl inode has data or not (as opposed to metadata only copy up).
If a file is copied up metadata only and later when same file is opened for
WRITE, then data copy up takes place. We copy up data, remove METACOPY
xattr and then set the UPPERDATA flag in ovl_inode->flags. While all these
operations happen with oi->lock held, read side of oi->flags can be
lockless. That is another thread on another cpu can check if UPPERDATA
flag is set or not.
So this gives us an ordering requirement w.r.t UPPERDATA flag. That is, if
another cpu sees UPPERDATA flag set, then it should be guaranteed that
effects of data copy up and remove xattr operations are also visible.
For example.
CPU1 CPU2
ovl_open() acquire(oi->lock)
ovl_open_maybe_copy_up() ovl_copy_up_data()
open_open_need_copy_up() vfs_removexattr()
ovl_already_copied_up()
ovl_dentry_needs_data_copy_up() ovl_set_flag(OVL_UPPERDATA)
ovl_test_flag(OVL_UPPERDATA) release(oi->lock)
Say CPU2 is copying up data and in the end sets UPPERDATA flag. But if
CPU1 perceives the effects of setting UPPERDATA flag but not the effects of
preceding operations (ex. upper that is not fully copied up), it will be a
problem.
Hence this patch introduces smp_wmb() on setting UPPERDATA flag operation
and smp_rmb() on UPPERDATA flag test operation.
May be some other lock or barrier is already covering it. But I am not sure
what that is and is it obvious enough that we will not break it in future.
So hence trying to be safe here and introducing barriers explicitly for
UPPERDATA flag/bit.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are couple of places where we need to know if file is already copied
up (in lockless manner). Right now its open coded and there are only two
conditions to check. Soon this patch series will introduce another
condition to check and Amir wants to introduce one more. So introduce a
helper instead to check this so that code is easier to read.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If it makes sense to copy up only metadata during copy up, do it. This is
done for regular files which are not opened for WRITE.
Right now ->metacopy is set to 0 always. Last patch in the series will
remove the hard coded statement and enable metacopy feature.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Just a little re-ordering of code. This helps with next patch where after
copying up metadata, we skip data copying step, if needed.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
By default metadata only copy up is disabled. Provide a mount option so
that users can choose one way or other.
Also provide a kernel config and module option to enable/disable metacopy
feature.
metacopy feature requires redirect_dir=on when upper is present.
Otherwise, it requires redirect_dir=follow atleast.
As of now, metacopy does not work with nfs_export=on. So if both
metacopy=on and nfs_export=on then nfs_export is disabled.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now two copy up helpers are in inode.c. Amir suggested it might be
better to move these to copy_up.c.
There will one more related function which will come in later patch.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_inode->redirect is an inode property and should be initialized in
ovl_get_inode() only when we are adding a new inode to cache. If inode is
already in cache, it is already initialized and we should not be touching
ovl_inode->redirect field.
As of now this is not a problem as redirects are used only for directories
which don't share inode. But soon I want to use redirects for regular
files also and there it can become an issue.
Hence, move ->redirect initialization in ovl_get_inode().
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was provided for debugging the ro/rw inconsistecy. The inconsitency
is now gone so this option is obsolete.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Opening regular files on overlayfs is now handled via ovl_open(). Remove
the now unused "open_flags" argument from d_op->d_real() and the d_real()
helper.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This partially reverts commit c568d68341.
Overlayfs files will now automatically get the correct locks, no need to
hack overlay support in VFS.
It is a partial revert, because it leaves the locks_inode() calls in place
and defines locks_inode() to file_inode(). We could revert those as well,
but it would be unnecessary code churn and it makes sense to document that
we are getting the inode for locking purposes.
Don't revert MS_NOREMOTELOCK yet since that has been part of the userspace
API for some time (though not in a useful way). Will try to remove
internal flags later when the dust around the new mount API settles.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Implement stacked fiemap().
Need to split inode operations for regular file (which has fiemap) and
special file (which doesn't have fiemap).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In the common case we can just use the real file cached in
file->private_data. There are two exceptions:
1) File has been copied up since open: in this unlikely corner case just
use a throwaway real file for the operation. If ever this becomes a
perfomance problem (very unlikely, since overlayfs has been doing most fine
without correctly handling this case at all), then we can deal with that by
updating the cached real file.
2) File's f_flags have changed since open: no need to reopen the cached
real file, we can just change the flags there as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Implement file operations on a regular overlay file. The underlying file
is opened separately and cached in ->private_data.
It might be worth making an exception for such files when accounting in
nr_file to confirm to userspace expectations. We are only adding a small
overhead (248bytes for the struct file) since the real inode and dentry are
pinned by overlayfs anyway.
This patch doesn't have any effect, since the vfs will use d_real() to find
the real underlying file to open. The patch at the end of the series will
actually enable this functionality.
AV: make it use open_with_fake_path(), don't mess with override_creds
SzM: still need to mess with override_creds() until no fs uses
current_cred() in their open method.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Copy i_size of the underlying inode to the overlay inode in ovl_copyattr().
This is in preparation for stacking I/O operations on overlay files.
This patch shouldn't have any observable effect.
Remove stale comment from ovl_setattr() [spotted by Vivek Goyal].
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This reverts commit 31c3a70695.
Re-add functionality dealing with i_writecount on truncate to overlayfs.
This patch shouldn't have any observable effects, since we just re-assert
the writecout that vfs_truncate() already got for us.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On inode creation copy certain inode flags from the underlying real inode
to the overlay inode.
This is in preparation for moving overlay functionality out of the VFS.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy up mtime and ctime to overlay inode after times in real object are
modified. Be careful not to dirty cachelines when not necessary.
This is in preparation for moving overlay functionality out of the VFS.
This patch shouldn't have any observable effect.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Only upper dir can be impure, but if we are in the middle of
iterating a lower real dir, dir could be copied up and marked
impure. We only want the impure cache if we started iterating
a real upper dir to begin with.
Aditya Kali reported that the following reproducer hits the
WARN_ON(!cache->refcount) in ovl_get_cache():
docker run --rm drupal:8.5.4-fpm-alpine \
sh -c 'cd /var/www/html/vendor/symfony && \
chown -R www-data:www-data . && ls -l .'
Reported-by: Aditya Kali <adityakali@google.com>
Tested-by: Aditya Kali <adityakali@google.com>
Fixes: 4edb83bb10 ('ovl: constant d_ino for non-merge dirs')
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
There were no conflicts between this and the contents of linux-next
until just before the merge window, when we saw multiple problems:
- A minor conflict with my own y2038 fixes, which I could address
by adding another patch on top here.
- One semantic conflict with late changes to the NFS tree. I addressed
this by merging Deepa's original branch on top of the changes that
now got merged into mainline and making sure the merge commit includes
the necessary changes as produced by coccinelle.
- A trivial conflict against the removal of staging/lustre.
- Multiple conflicts against the VFS changes in the overlayfs tree.
These are still part of linux-next, but apparently this is no longer
intended for 4.18 [1], so I am ignoring that part.
As Deepa writes:
The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64 timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual
replacement becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions.
Thomas Gleixner adds:
I think there is no point to drag that out for the next merge window.
The whole thing needs to be done in one go for the core changes which
means that you're going to play that catchup game forever. Let's get
over with it towards the end of the merge window.
[1] https://www.spinics.net/lists/linux-fsdevel/msg128294.html
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CZX2
-----END PGP SIGNATURE-----
Merge tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
Currently, there is a small window where ovl_obtain_alias() can
race with ovl_instantiate() and create two different overlay inodes
with the same underlying real non-dir non-hardlink inode.
The race requires an adversary to guess the file handle of the
yet to be created upper inode and decode the guessed file handle
after ovl_creat_real(), but before ovl_instantiate().
This race does not affect overlay directory inodes, because those
are decoded via ovl_lookup_real() and not with ovl_obtain_alias().
This patch fixes the race, by using inode_insert5() to add a newly
created inode to cache.
If the newly created inode apears to already exist in cache (hashed
by the same real upper inode), we instantiate the dentry with the old
inode and drop the new inode, instead of silently not hashing the new
inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_get_inode() right now has 5 parameters. Soon this patch series will
add 2 more and suddenly argument list starts looking too long.
Hence pass arguments to ovl_get_inode() in a structure and it looks
little cleaner.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
vfs_mkdir() may succeed and leave the dentry passed to it unhashed and
negative. ovl_create_real() is the last caller breaking when that
happens.
[amir: split re-factoring of ovl_create_temp() to prep patch
add comment about unhashed dir after mkdir
add pr_warn() if mkdir succeeds and lookup fails]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Also used ovl_create_temp() in ovl_create_index() instead of calling
ovl_do_mkdir() directly, so now all callers of ovl_do_mkdir() are routed
through ovl_create_real(), which paves the way for Al's fix for non-hashed
result from vfs_mkdir().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Al Viro suggested to simplify callers of ovl_create_real() by
returning the created dentry (or ERR_PTR) from ovl_create_real().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs should cope with online changes to underlying layer
without crashing the kernel, which is what xfstest overlay/019
checks.
This test may sometimes trigger WARN_ON() in ovl_create_or_link()
when linking an overlay inode that has been changed on underlying
layer.
Remove those WARN_ON() to prevent the stress test from failing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With mount option "xino=on", mounter declares that there are enough
free high bits in underlying fs to hold the layer fsid.
If overlayfs does encounter underlying inodes using the high xino
bits reserved for layer fsid, a warning will be emitted and the original
inode number will be used.
The mount option name "xino" goes after a similar meaning mount option
of aufs, but in overlayfs case, the mapping is stateless.
An example for a use case of "xino=on" is when upper/lower is on an xfs
filesystem. xfs uses 64bit inode numbers, but it currently never uses the
upper 8bit for inode numbers exposed via stat(2) and that is not likely to
change in the future without user opting-in for a new xfs feature. The
actual number of unused upper bit is much larger and determined by the xfs
filesystem geometry (64 - agno_log - agblklog - inopblog). That means
that for all practical purpose, there are enough unused bits in xfs
inode numbers for more than OVL_MAX_STACK unique fsid's.
Another use case of "xino=on" is when upper/lower is on tmpfs. tmpfs inode
numbers are allocated sequentially since boot, so they will practially
never use the high inode number bits.
For compatibility with applications that expect 32bit inodes, the feature
can be disabled with "xino=off". The option "xino=auto" automatically
detects underlying filesystem that use 32bit inodes and enables the
feature. The Kconfig option OVERLAY_FS_XINO_AUTO and module parameter of
the same name, determine if the default mode for overlayfs mount is
"xino=auto" or "xino=off".
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, relax non-samefs constraint for consistent d_ino and always
iterate non-merge dir using ovl_fill_real() actor so we can remap lower
inode numbers to unique lower fs range.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When overlay layers are not all on the same fs, but all inode numbers
of underlying fs do not use the high 'xino' bits, overlay st_ino values
are constant and persistent.
In that case, set i_ino value to the same value as st_ino for nfsd
readdirplus validator.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On 64bit systems, when overlay layers are not all on the same fs, but
all inode numbers of underlying fs are not using the high bits, use the
high bits to partition the overlay st_ino address space. The high bits
hold the fsid (upper fsid is 0). This way overlay inode numbers are unique
and all inodes use overlay st_dev. Inode numbers are also persistent
for a given layer configuration.
Currently, our only indication for available high ino bits is from a
filesystem that supports file handles and uses the default encode_fh()
operation, which encodes a 32bit inode number.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.
Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.
The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Certain properties in ovl_lookup_data should be set only for the last
element of the path. IOW, if we are calling ovl_lookup_single() for an
absolute redirect, then d->is_dir and d->opaque do not make much sense
for intermediate path elements. Instead set them only if dentry being
lookup is last path element.
As of now we do not seem to be making use of d->opaque if it is set for
a path/dentry in lower. But just define the semantics so that future code
can make use of this assumption.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If we are looking in last layer, then there should not be any need to
process redirect. redirect information is used only for lookup in next
lower layer and there is no more lower layer to look into. So no need
to process redirects.
IOW, ignore redirects on lowest layer.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When decoding a lower file handle, we need to check if lower file was
copied up and indexed and if it has a whiteout index, we need to check
if this is an unlinked but open non-dir before returning -ESTALE.
To find out if this is an unlinked but open non-dir we need to lookup
an overlay inode in inode cache by lower inode and that requires decoding
the lower file handle before looking in inode cache.
Before this change, if the lower inode turned out to be a directory, we
may have paid an expensive cost to reconnect that lower directory for
nothing.
After this change, we start by decoding a disconnected lower dentry and
using the lower inode for looking up an overlay inode in inode cache.
If we find overlay inode and dentry in cache, we avoid the index lookup
overhead. If we don't find an overlay inode and dentry in cache, then we
only need to decode a connected lower dentry in case the lower dentry is
a non-indexed directory.
The xfstests group overlay/exportfs tests decoding overlayfs file
handles after drop_caches with different states of the file at encode
and decode time. Overall the tests in the group call ovl_lower_fh_to_d()
89 times to decode a lower file handle.
Before this change, the tests called ovl_get_index_fh() 75 times and
reconnect_one() 61 times.
After this change, the tests call ovl_get_index_fh() 70 times and
reconnect_one() 59 times. The 2 cases where reconnect_one() was avoided
are cases where a non-upper directory file handle was encoded, then the
directory removed and then file handle was decoded.
To demonstrate the affect on decoding file handles with hot inode/dentry
cache, the drop_caches call in the tests was disabled. Without
drop_caches, there are no reconnect_one() calls at all before or after
the change. Before the change, there are 75 calls to ovl_get_index_fh(),
exactly as the case with drop_caches. After the change, there are only
10 calls to ovl_get_index_fh().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On lookup of non directory, we try to decode the origin file handle
stored in upper inode. The origin file handle is supposed to be decoded
to a disconnected non-dir dentry, which is fine, because we only need
the lower inode of a copy up origin.
However, if the origin file handle somehow turns out to be a directory
we pay the expensive cost of reconnecting the directory dentry, only to
get a mismatch file type and drop the dentry.
Optimize this case by explicitly opting out of reconnecting the dentry.
Opting-out of reconnect is done by passing a NULL acceptable callback
to exportfs_decode_fh().
While the case described above is a strange corner case that does not
really need to be optimized, the API added for this optimization will
be used by a following patch to optimize a more common case of decoding
an overlayfs file handle.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename ovl_encode_fh() to ovl_encode_real_fh() to differentiate from the
exportfs function ovl_encode_inode_fh() and change the latter to
ovl_encode_fh() to match the exportfs method name.
Rename ovl_decode_fh() to ovl_decode_real_fh() for consistency.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.
Fixes: a0c5ad307a ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.
Here is an example to demonstrate the issue. Say you have following setup.
upper: /redirect (redirect=/a/b/c)
lower1: /a/[b]/c ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo
Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.
Following is a reproducer.
Watch me make foo disappear:
$ mkdir lower middle upper work work2 merged
$ mkdir lower/origin
$ touch lower/origin/foo
$ mount -t overlay none merged/ \
-olowerdir=lower,upperdir=middle,workdir=work2
$ mkdir merged/pure
$ mv merged/origin merged/pure/redirect
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
$ mv merged/pure/redirect merged/redirect
Now you see foo inside a twice redirected merged dir:
$ ls merged/redirect
foo
$ umount merged
$ mount -t overlay none merged/ \
-olowerdir=middle:lower,upperdir=upper,workdir=work
After mount cycle you don't see foo inside the same dir:
$ ls merged/redirect
During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d->last signifies that this is the last layer we are looking into and there
is no more. And that means this allows for some optimzation opportunities
during lookup. For example, in ovl_lookup_single() we don't have to check
for opaque xattr of a directory is this is the last layer we are looking
into (d->last = true).
But knowing for sure whether we are looking into last layer can be very
tricky. If redirects are not enabled, then we can look at poe->numlower and
figure out if the lookup we are about to is last layer or not. But if
redircts are enabled then it is possible poe->numlower suggests that we are
looking in last layer, but there is an absolute redirect present in found
element and that redirects us to a layer in root and that means lookup will
continue in lower layers further.
For example, consider following.
/upperdir/pure (opaque=y)
/upperdir/pure/foo (opaque=y,redirect=/bar)
/lowerdir/bar
In this case pure is "pure upper". When we look for "foo", that time
poe->numlower=0. But that alone does not mean that we will not search for a
merge candidate in /lowerdir. Absolute redirect changes that.
IOW, d->last should not be set just based on poe->numlower if redirects are
enabled. That can lead to setting d->last while it should not have and that
means we will not check for opaque xattr while we should have.
So do this.
- If redirects are not enabled, then continue to rely on poe->numlower
information to determine if it is last layer or not.
- If redirects are enabled, then set d->last = true only if this is the
last layer in root ovl_entry (roe).
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 02b69b284c ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.
Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.
When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 8383f17488 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add some hints about overlayfs kernel config options.
Enabling NFS export by default is especially recommended against, as it
incurs a performance penalty even if the filesystem is not actually
exported.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
redirect_dir=nofollow should not follow a redirect. But in a specific
configuration it can still follow it. For example try this.
$ mkdir -p lower0 lower1/foo upper work merged
$ touch lower1/foo/lower-file.txt
$ setfattr -n "trusted.overlay.opaque" -v "y" lower1/foo
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=on none merged
$ cd merged
$ mv foo foo-renamed
$ umount merged
# mount again. This time with redirect_dir=nofollow
$ mount -t overlay -o lowerdir=lower1:lower0,workdir=work,upperdir=upper,redirect_dir=nofollow none merged
$ ls merged/foo-renamed/
# This lists lower-file.txt, while it should not have.
Basically, we are doing redirect check after we check for d.stop. And
if this is not last lower, and we find an opaque lower, d.stop will be
set.
ovl_lookup_single()
if (!d->last && ovl_is_opaquedir(this)) {
d->stop = d->opaque = true;
goto out;
}
To fix this, first check redirect is allowed. And after that check if
d.stop has been set or not.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: 438c84c2f0 ("ovl: don't follow redirects if redirect_dir=off")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fs/overlayfs/export.c:459:10-16: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 4b91c30a5a ("ovl: lookup connected ancestor of dir in inode cache")
CC: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This change relaxes copy up on encode of merge dir with lower layer > 1
and handles the case of encoding a merge dir with lower layer 1, where an
ancestor is a non-indexed merge dir. In that case, decode of the lower
file handle will not have been possible if the non-indexed ancestor is
redirected before or after encode.
Before encoding a non-upper directory file handle from real layer N, we
need to check if it will be possible to reconnect an overlay dentry from
the real lower decoded dentry. This is done by following the overlay
ancestry up to a "layer N connected" ancestor and verifying that all
parents along the way are "layer N connectable". If an ancestor that is
NOT "layer N connectable" is found, we need to copy up an ancestor, which
is "layer N connectable", thus making that ancestor "layer N connected".
For example:
layer 1: /a
layer 2: /a/b/c
The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is
copied up and renamed, upper dir /a will be indexed by lower dir /a from
layer 1. The dir /a from layer 2 will never be indexed, so the algorithm
in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected
overlay dentry from the connected lower dentry /a/b/c.
To avoid this problem on decode time, we need to copy up an ancestor of
/a/b/c, which is "layer 2 connectable", on encode time. That ancestor is
/a/b. After copy up (and index) of /a/b, it will become "layer 2 connected"
and when the time comes to decode the file handle from lower dentry /a/b/c,
ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding
a connected overlay dentry will be accomplished.
(*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup
an entry /a in the lower layers above layer N and find the indexed dir /a
from layer 1. If that improvement is made, then the check for "layer N
connected" will need to verify there are no redirects in lower layers above
layer N. In the example above, /a will be "layer 2 connectable". However,
if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be
"layer 2 connectable":
layer 1: /A (redirect = /a)
layer 2: /a/b/c
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit 31747eda41 ("ovl: hash directory inodes for fsnotify")
fixed an issue of inotify watch on directory that stops getting
events after dropping dentry caches.
A similar issue exists for non-dir non-upper files, for example:
$ mkdir -p lower upper work merged
$ touch lower/foo
$ mount -t overlay -o
lowerdir=lower,workdir=work,upperdir=upper none merged
$ inotifywait merged/foo &
$ echo 2 > /proc/sys/vm/drop_caches
$ cat merged/foo
inotifywait doesn't get the OPEN event, because ovl_lookup() called
from 'cat' allocates a new overlay inode and does not reuse the
watched inode.
Fix this by hashing non-dir overlay inodes by lower real inode in
the following cases that were not hashed before this change:
- A non-upper overlay mount
- A lower non-hardlink when index=off
A helper ovl_hash_bylower() was added to put all the logic and
documentation about which real inode an overlay inode is hashed by
into one place.
The issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Another fix for an issue reported by 0-day robot.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 8ed5eec9d6 ("ovl: encode pure upper file handles")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A re-factoring patch in NFS export series has passed the wrong argument
to ovl_get_inode() causing a regression in the very recent fix to
fsnotify of overlay merge dir.
The regression has caused merge directory inodes to be hashed by upper
instead of lower real inode, when NFS export and directory indexing is
disabled. That caused an inotify watch to become obsolete after directory
copy up and drop caches.
LTP test inotify07 was improved to catch this regression.
The regression also caused multiple redirect dirs to same origin not to
be detected on lookup with NFS export disabled. An xfstest was added to
cover this case.
Fixes: 0aceb53e73 ("ovl: do not pass overlay dentry to ovl_get_inode()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that NFS export operations are implemented, enable overlayfs NFS
export support if the "nfs_export" feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_lookup_real() in lower layer walks back lower parents to find the
topmost indexed parent. If an indexed ancestor is found before reaching
lower layer root, ovl_lookup_real() is called recursively with upper
layer to walk back from indexed upper to the topmost connected/hashed
upper parent (or up to root).
ovl_lookup_real() in upper layer then walks forward to connect the topmost
upper overlay dir dentry and ovl_lookup_real() in lower layer continues to
walk forward to connect the decoded lower overlay dir dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a dir file handle requires walking backward up to layer root and
for lower dir also checking the index to see if any of the parents have
been copied up.
Lookup overlay ancestor dentry in inode/dentry cache by decoded real
parents to shortcut looking up all the way back to layer root.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Non-indexed upper dirs are encoded as upper file handles. When NFS export
is enabled, hash non-indexed directory inodes by upper inode, so we can
find them in inode cache using the decoded upper inode.
When NFS export is disabled, directories are not indexed on copy up, so
hash non-indexed directory inodes by origin inode, the same hash key
that is used before copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Similar to decoding a pure upper dir file handle, decoding a pure lower
dir file handle is implemented by looking an overlay dentry of the same
path as the pure lower path and verifying that the overlay dentry's
real lower matches the decoded real lower file handle.
Unlike the case of upper dir file handle, the lookup of overlay path by
lower real path can fail or find a mismatched overlay dentry if any of
the lower parents have been copied up and renamed. To address this case
we will need to check if any of the lower parents are indexed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed dir file handle is done by looking up the file handle
in index dir by name and then decoding the upper dir from the index origin
file handle. The decoded upper path is used to lookup an overlay dentry of
the same path.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lookup overlay inode in cache by origin inode, so we can decode a file
handle of an open file even if the index has a whiteout index entry to
mark this overlay inode was unlinked.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed non-dir file handle is similar to decoding a lower
non-dir file handle, but additionally, we lookup the file handle in index
dir by name to find the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a lower non-dir file handle is done by decoding the lower dentry
from underlying lower fs, finding or allocating an overlay inode that is
hashed by the real lower inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For indexed or lower non-dir, encode a non-connectable lower file handle
from origin inode. For indexed or lower dir, when ofs->numlower == 1,
encode a lower file handle from lower dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a merge dir, whose origin's parent is under a redirected
lower dir is not always possible. As a simple aproximation, we do
not encode lower dir file handles when overlay has multiple lower
layers and origin is below the topmost lower layer.
We should later relax this condition and copy up only the parent
that is under a redirected lower.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We only need to encode origin if there is a chance that the same object was
encoded pre copy up and then we need to stay consistent with the same
encoding also after copy up.
In case a non-pure upper is not indexed, then it was copied up before NFS
export support was enabled. In that case, we don't need to worry about
staying consistent with pre copy up encoding and we encode an upper file
handle.
This mitigates the problem that with no index, we cannot find an upper
inode from origin inode, so we cannot decode a non-indexed upper from
origin file handle.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Until this change, we decoded upper file handles by instantiating an
overlay dentry from the real upper dentry. This is sufficient to handle
pure upper files, but insufficient to handle merge/impure dirs.
To that end, if decoded real upper dir is connected and hashed, we
lookup an overlay dentry with the same path as the real upper dir.
If decoded real upper is non-dir, we instantiate a disconnected overlay
dentry as before this change.
Because ovl_fh_to_dentry() returns a connected overlay dir dentry,
exportfs never needs to call get_parent() and get_name() to reconnect an
upper overlay dir. Because connectable non-dir file handles are not
supported, exportfs will not be able to use fh_to_parent() and get_name()
methods to reconnect a disconnected non-dir to its parent. Therefore, the
methods get_parent() and get_name() are implemented just to print out a
sanity warning and the method fh_to_parent() is implemented to warn the
user that using the 'subtree_check' exportfs option is not supported.
An alternative approach could have been to implement instantiating of
an overlay directory inode from origin/index and implement get_parent()
and get_name() by calling into underlying fs operations and them
instantiating the overlay parent dir.
The reasons for not choosing the get_parent() approach were:
- Obtaining a disconnected overlay dir dentry would requires a
delicate re-factoring of ovl_lookup() to get a dentry with overlay
parent info. It was preferred to avoid doing that re-factoring unless
it was proven worthy.
- Going down the path of disconnected dir would mean that the (non
trivial) code path of d_splice_alias() could be traveled and that
meant writing more tests and introduces race cases that are very hard
to hit on purpose. Taking the path of connecting overlay dentry by
forward lookup is therefore the safe and boring way to avoid surprises.
The culprits of the chosen "connected overlay dentry" approach:
- We need to take special care to rename of ancestors while connecting
the overlay dentry by real dentry path. These subtleties are usually
handled by generic exportfs and VFS code.
- In a hypothetical workload, we could end up in a loop trying to connect,
interrupted by rename and restarting connect forever.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an upper file handle is done by decoding the upper dentry from
underlying upper fs, finding or allocating an overlay inode that is
hashed by the real upper inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Encode overlay file handles as struct ovl_fh containing the file handle
encoding of the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for using ovl_get_inode() for decoding file handles
for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper is needed to lookup an index by file handle for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Orphan index entries are non-dir index entries whose union nlink count
dropped to zero. With index=on, orphan index entries are removed on
mount. With NFS export feature enabled, orphan index entries are replaced
with white out index entries to block future open by handle from opening
the lower file.
When dir index has a stale 'upper' xattr, we assume that the upper dir
was removed and we treat the dir index as orphan entry that needs to be
whited out or removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteout
index entry.
This is needed for NFS export in order to prevent future open by handle
from opening the lower file directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When non-dir index union nlink drops to zero the non-dir index
is cleaned. Do the same for directory type index entries when
union directory is removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all dirs are indexed on copy up.
Non-dir files are copied up directly to indexdir and then hardlinked
to upper dir.
Directories are copied up to indexdir, then an index entry is created
in indexdir with 'upper' xattr pointing to the copied up dir and then
the copied up dir is moved to upper dir.
Directory index is also used for consistency verification, like
detecting multiple redirected dirs to the same lower dir on lookup.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all non-dir are indexed on copy up.
The copy up origin inode of an indexed non-dir can be used as a unique
identifier of the overlay object.
The full index is also used for consistency verfication, like detecting
multiple non-hardlink uppers with the same 'origin' on lookup.
Directory index on copy up will be implemented by following patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper determines which lower file needs to be indexed
on copy up and before nlink changes.
For index=on, the helper evaluates to true for lower hardlinks.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A previous failed attempt to create or whiteout a directory index may
leave index entries named '#%x' in the index dir. Cleanup those temp
entries on mount instead of failing the mount.
In the future, we may drop 'work' dir and use 'index' dir instead.
This change is enough for cleaning up copy up leftovers 'from the future',
but it is not enough for cleaning up rmdir leftovers 'from the future'
(i.e. temp dir containing whiteouts).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Directory index entries should have 'upper' xattr pointing to the real
upper dir. Verifying that the upper dir file handle is not stale is
expensive, so only verify stale directory index entries on mount if
NFS export feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Whiteout index entries are used as an indication that an exported
overlay file handle should be treated as stale (i.e. after unlink
of the overlay inode).
Check on mount that whiteout index entries have a name that looks like
a valid file handle and cleanup invalid index entries.
For whiteout index entries, do not check that they also have valid
origin fh and nlink xattr, because those xattr do not exist for a
whiteout index entry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A directory index is a directory type entry in index dir with a
"trusted.overlay.upper" xattr containing an encoded ovl_fh of the merge
directory upper dir inode.
On lookup of non-dir files, lower file is followed by origin file handle.
On lookup of dir entries, lower dir is found by name and then compared
to origin file handle. We only trust dir index if we verified that lower
dir matches origin file handle, otherwise index may be inconsistent and
we ignore it.
If we find an indexed non-upper dir or an indexed merged dir, whose
index 'upper' xattr points to a different upper dir, that means that the
lower directory may be also referenced by another upper dir via redirect,
so we fail the lookup on inconsistency error.
To be consistent with directory index entries format, the association of
index dir to upper root dir, that was stored by older kernels in
"trusted.overlay.origin" xattr is now stored in "trusted.overlay.upper"
xattr. This also serves as an indication that overlay was mounted with a
kernel that support index directory entries. For backward compatibility,
if an 'origin' xattr exists on the index dir we also verify it on mount.
Directory index entries are going to be used for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On a malformed overlay, several redirected dirs can point to the same
dir on a lower layer. This presents a similar challenge as broken
hardlinks, because different objects in the overlay can return the same
st_ino/st_dev pair from stat(2).
For broken hardlinks, we do not provide constant st_ino on copy up to
avoid this inconsistency. When NFS export feature is enabled, apply
the same logic to files and directories with unverified lower origin.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the NFS export feature is enabled, overlayfs implicitly enables the
feature "verify_lower". When the "verify_lower" feature is enabled, a
directory inode found in lower layer by name or by redirect_dir is
verified against the file handle of the copy up origin that is stored in
the upper layer.
This introduces a change of behavior for the case of lower layer
modification while overlay is offline. A lower directory created or
moved offline under an exisitng upper directory, will not be merged with
that upper directory.
The NFS export feature should not be used after copying layers, because
the new lower directory inodes would fail verification and won't be
merged with upper directories.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce the "nfs_export" config, module and mount options.
The NFS export feature depends on the "index" feature and enables two
implicit overlayfs features: "index_all" and "verify_lower".
The "index_all" feature creates an index on copy up of every file and
directory. The "verify_lower" feature uses the full index to detect
overlay filesystems inconsistencies on lookup, like redirect from
multiple upper dirs to the same lower dir.
NFS export can be enabled for non-upper mount with no index. However,
because lower layer redirects cannot be verified with the index, enabling
NFS export support on an overlay with no upper layer requires turning off
redirect follow (e.g. "redirect_dir=nofollow").
The full index may incur some overhead on mount time, especially when
verifying that lower directory file handles are not stale.
NFS export support, full index and consistency verification will be
implemented by following patches.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Document that inode index feature solves breaking hard links on
copy up.
Simplify Kconfig backward compatibility disclaimer.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove the "origin" language from the functions that handle set, get
and verify of "origin" xattr and pass the xattr name as an argument.
The same helpers are going to be used for NFS export to get, get and
verify the "upper" xattr for directory index entries.
ovl_verify_origin() is now a helper used only to verify non upper
file handle stored in "origin" xattr of upper inode.
The upper root dir file handle is still stored in "origin" xattr on
the index dir for backward compatibility. This is going to be changed
by the patch that adds directory index entries support.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pass the fs instance with lower_layers array instead of the dentry
lowerstack array to ovl_check_origin_fh(), because the dentry members
of lowerstack play no role in this helper.
This change simplifies the argument list of ovl_check_origin(),
ovl_cleanup_index() and ovl_verify_index().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Re-factor ovl_check_origin() and ovl_get_origin(), so origin fh xattr is
read from upper inode only once during lookup with multiple lower layers
and only once when verifying index entry origin.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Store the fs root layer index inside ovl_layer struct, so we can
get the root fs layer index from merge dir lower layer instead of
find it with ovl_find_layer() helper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When work dir creation fails, a warning is emitted and overlay is
mounted r/o. Trying to remount r/w will fail with no work dir.
When index dir creation fails, the same warning is emitted and overlay
is mounted r/o, but trying to remount r/w will succeed. This may cause
unintentional corruption of filesystem consistency.
Adjust the behavior of index dir creation failure to that of work dir
creation failure and do not allow to remount r/w. User needs to state
an explicitly intention to work without an index by mounting with
option 'index=off' to allow r/w mount with no index dir.
When mounting with option 'index=on' and no 'upperdir', index is
implicitly disabled, so do not warn about no file handle support.
The issue was introduced with inodes index feature in v4.13, but this
patch will not apply cleanly before ovl_fill_super() re-factoring in
v4.15.
Fixes: 02bcd15774 ("ovl: introduce the inodes index dir feature")
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs falls back to index=off if lower/upper fs does not support
file handles. Do the same if upper fs does not support xattr.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For a merge dir that was copied up before v4.12 or that was hand crafted
offline (e.g. mkdir {upper/lower}/dir), upper dir does not contain the
'trusted.overlay.origin' xattr. In that case, stat(2) on the merge dir
returns the lower dir st_ino, but getdents(2) returns the upper dir d_ino.
After this change, on merge dir lookup, missing origin xattr on upper
dir will be fixed and 'impure' xattr will be fixed on parent of the legacy
merge dir.
Suggested-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The optimization in ovl_cache_get_impure() that tries to remove an
unneeded "impure" xattr needs to take mnt_want_write() on upper fs.
Fixes: 4edb83bb10 ("ovl: constant d_ino for non-merge dirs")
Cc: <stable@vger.kernel.org> #v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are several write operations on upper fs not covered by
mnt_want_write():
- test set/remove OPAQUE xattr
- test create O_TMPFILE
- set ORIGIN xattr in ovl_verify_origin()
- cleanup of index entries in ovl_indexdir_cleanup()
Some of these go way back, but this patch only applies over the
v4.14 re-factoring of ovl_fill_super().
Cc: <stable@vger.kernel.org> #v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The functions ovl_lower_positive() and ovl_check_empty_dir() both take
inode mutex on the real lower dir under ovl_want_write() which takes
the upper_mnt sb_writers lock.
While this is not a clear locking order or layering violation, it creates
an undesired lock dependency between two unrelated layers for no good
reason.
This lock dependency materializes to a false(?) positive lockdep warning
when calling rmdir() on a nested overlayfs, where both nested and
underlying overlayfs both use the same fs type as upper layer.
rmdir() on the nested overlayfs creates the lock chain:
sb_writers of upper_mnt (e.g. tmpfs) in ovl_do_remove()
ovl_i_mutex_dir_key[] of lower overlay dir in ovl_lower_positive()
rmdir() on the underlying overlayfs creates the lock chain in
reverse order:
ovl_i_mutex_dir_key[] of lower overlay dir in vfs_rmdir()
sb_writers of nested upper_mnt (e.g. tmpfs) in ovl_do_remove()
To rid of the unneeded locking dependency, move both ovl_lower_positive()
and ovl_check_empty_dir() to before ovl_want_write() in rmdir() and
rename() implementation.
This change spreads the pieces of ovl_check_empty_and_clear() directly
inside the rmdir()/rename() implementations so the helper is no longer
needed and removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As a writable mount, it is not expected for overlayfs to return
EINVAL/EROFS for fsync, even if dir/file is not changed.
This commit fixes the case of fsync of directory, which is easier to
address, because overlayfs already implements fsync file operation for
directories.
The problem reported by Raphael is that new PostgreSQL 10.0 with a
database in overlayfs where lower layer in squashfs fails to start.
The failure is due to fsync error, when PostgreSQL does fsync on all
existing db directories on startup and a specific directory exists
lower layer with no changes.
Reported-by: Raphael Hertzog <raphael@ouaza.com>
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Raphaël Hertzog <hertzog@debian.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.
Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.
The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.
As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.
The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.
Cc: <stable@vger.kernel.org> #v4.13
Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Conform two stray warning messages to the standard overlayfs: prefix.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fix ptr_ret.cocci warnings:
fs/overlayfs/overlayfs.h:179:11-17: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When executing filesystem sync or umount on overlayfs,
dirty data does not get synced as expected on upper filesystem.
This patch fixes sync filesystem method to keep data consistency
for overlayfs.
Signed-off-by: Chengguang Xu <cgxu@mykernel.net>
Fixes: e593b2bf51 ("ovl: properly implement sync_filesystem()")
Cc: <stable@vger.kernel.org> #4.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes a regression with readdir of impure dir in overlayfs
that is shared to VM via 9p fs.
Reported-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Fixes: 4edb83bb10 ("ovl: constant d_ino for non-merge dirs")
Cc: <stable@vger.kernel.org> #4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we seem to be passing index as "lowerdentry" and origin.dentry
as "upperdentry". IIUC, we should pass these parameters in reversed order
and this looks like a bug.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Fixes: caf70cb2ba ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs is following redirects even when redirects are disabled. If this
is unintentional (probably the majority of cases) then this can be a
problem. E.g. upper layer comes from untrusted USB drive, and attacker
crafts a redirect to enable read access to otherwise unreadable
directories.
If "redirect_dir=off", then turn off following as well as creation of
redirects. If "redirect_dir=follow", then turn on following, but turn off
creation of redirects (which is what "redirect_dir=off" does now).
This is a backward incompatible change, so make it dependent on a config
option.
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull overlayfs updates from Miklos Szeredi:
- Report constant st_ino values across copy-up even if underlying
layers are on different filesystems, but using different st_dev
values for each layer.
Ideally we'd report the same st_dev across the overlay, and it's
possible to do for filesystems that use only 32bits for st_ino by
unifying the inum space. It would be nice if it wasn't a choice of 32
or 64, rather filesystems could report their current maximum (that
could change on resize, so it wouldn't be set in stone).
- miscellaneus fixes and a cleanup of ovl_fill_super(), that was long
overdue.
- created a path_put_init() helper that clears out the pointers after
putting the ref.
I think this could be useful elsewhere, so added it to <linux/path.h>
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (30 commits)
ovl: remove unneeded arg from ovl_verify_origin()
ovl: Put upperdentry if ovl_check_origin() fails
ovl: rename ufs to ofs
ovl: clean up getting lower layers
ovl: clean up workdir creation
ovl: clean up getting upper layer
ovl: move ovl_get_workdir() and ovl_get_lower_layers()
ovl: reduce the number of arguments for ovl_workdir_create()
ovl: change order of setup in ovl_fill_super()
ovl: factor out ovl_free_fs() helper
ovl: grab reference to workbasedir early
ovl: split out ovl_get_indexdir() from ovl_fill_super()
ovl: split out ovl_get_lower_layers() from ovl_fill_super()
ovl: split out ovl_get_workdir() from ovl_fill_super()
ovl: split out ovl_get_upper() from ovl_fill_super()
ovl: split out ovl_get_lowerstack() from ovl_fill_super()
ovl: split out ovl_get_workpath() from ovl_fill_super()
ovl: split out ovl_get_upperpath() from ovl_fill_super()
ovl: use path_put_init() in error paths for ovl_fill_super()
vfs: add path_put_init()
...
If ovl_check_origin() fails, we should put upperdentry. We have a reference
on it by now. So goto out_put_upper instead of out.
Fixes: a9d019573e ("ovl: lookup non-dir copy-up-origin by file handle")
Cc: <stable@vger.kernel.org> #4.12
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Rename all "struct ovl_fs" pointers to "ofs". The "ufs" name is historical
and can only be found in overlayfs/super.c.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move calling ovl_get_lower_layers() into ovl_get_lowerstack().
ovl_get_lowerstack() now returns the root dentry's filled in ovl_entry.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move calling ovl_get_workdir() into ovl_get_workpath().
Rename ovl_get_workdir() to ovl_make_workdir() and ovl_get_workpath() to
ovl_get_workdir().
Workpath is now not needed outside ovl_get_workdir().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Merge ovl_get_upper() and ovl_get_upperpath().
The resulting function is named ovl_get_upper(), though it still returns
upperpath as well.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove "sb" and "dentry" arguments of ovl_workdir_create() and related
functions. Move setting MS_RDONLY flag to callers.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move ovl_get_upper() immediately after ovl_get_upperpath(),
ovl_get_workdir() immediately after ovl_get_workdir() and
ovl_get_lower_layers() immediately after ovl_get_lowerstack().
Also move prepare_creds() up to where other allocations are happening.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_rename() updates dir cache version for impure old parent if an entry
with copy up origin is moved into old parent, but it did not update
cache version if the entry moved out of old parent has a copy up origin.
[SzM] Same for new dir: we updated the version if an entry with origin was
moved in, but not if an entry with origin was moved out.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For the case of all layers not on the same fs, return the copy up origin
inode st_dev/st_ino for non-dir from stat(2).
This guaranties constant st_dev/st_ino for non-dir across copy up.
Like the same fs case, st_ino of non-dir is also persistent.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
two files are equal when in fact, they may have different content.
Therefore, unlike the same fs case, st_dev is not persistent because it
uses the unique anonymous bdev allocated for the lower layer.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For non-samefs setup, to make sure that st_dev/st_ino pair is unique
across the system, we return a unique anonymous st_dev for stat(2)
of lower layer inode.
A following patch is going to fix constant st_dev/st_ino across copy up
by returning origin st_dev/st_ino for copied up objects.
If the st_dev/st_ino for copied up object would have been the same as
that of the real underlying lower file, running diff on underlying lower
file and overlay copied up file would result in diff reporting that the
2 files are equal when in fact, they may have different content.
[amir: simplify ovl_get_pseudo_dev()
split from allocate anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Generate unique values of st_dev per lower layer for non-samefs
overlay mount. The unique values are obtained by allocating anonymous
bdevs for each of the lowerdirs in the overlayfs instance.
The anonymous bdev is going to be returned by stat(2) for lowerdir
non-dir entries in non-samefs case.
[amir: split from ovl_getattr() and re-structure patches]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Define new structures to represent overlay instance lower layers and
overlay merge dir lower layers to make room for storing more per layer
information in-memory.
Instead of keeping the fs instance lower layers in an array of struct
vfsmount, keep them in an array of new struct ovl_layer, that has a
pointer to struct vfsmount.
Instead of keeping the dentry lower layers in an array of struct path,
keep them in an array of new struct ovl_path, that has a pointer to
struct dentry and to struct ovl_layer.
Add a small helper to find the fs layer id that correspopnds to a lower
struct ovl_path and use it in ovl_lookup().
[amir: split re-structure from anonymous bdev patch]
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Most overlayfs c files already explicitly include ovl_entry.h
to use overlay entry struct definitions and upcoming changes
are going to require even more c files to include this header.
All overlayfs c files include overlayfs.h and overlayfs.h itself
refers to some structs defined in ovl_entry.h, so it seems more
logic to include ovl_entry.h from overlayfs.h than from c files.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
An "origin && non-merge" upper dir may have leftover whiteouts that
were created in past mount. overlayfs does no clear this dir when we
delete it, which may lead to rmdir fail or temp file left in workdir.
Simple reproducer:
mkdir lower upper work merge
mkdir -p lower/dir
touch lower/dir/a
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm merge/dir/a
umount merge
rm -rf lower/*
touch lower/dir (*)
mount -t overlay overlay -olowerdir=lower,upperdir=upper,\
workdir=work merge
rm -rf merge/dir
Syslog dump:
overlayfs: cleanup of 'work/#7' failed (-39)
(*): if we do not create the regular file, the result is different:
rm: cannot remove "dir/": Directory not empty
This patch adds a check for the case of non-merge dir that may contain
whiteouts, and calls ovl_check_empty_dir() to check and clear whiteouts
from upper dir when an empty dir is being deleted.
[amir: split patch from ovl_check_empty_dir() cleanup
rename ovl_is_origin() to ovl_may_have_whiteouts()
check OVL_WHITEOUTS flag instead of checking origin xattr]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Filter out non-whiteout non-upper entries from list of merge dir entries
while checking if merge dir is empty in ovl_check_empty_dir().
The remaining work for ovl_clear_empty() is to clear all entries on the
list.
[amir: split patch from rmdir bug fix]
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a non-merge dir in an overlay mount has an overlay.origin xattr, it
means it was once an upper merge dir, which may contain whiteouts and
then the lower dir was removed under it.
Do not iterate real dir directly in this case to avoid exposing whiteouts.
[SzM] Set OVL_WHITEOUT for all merge directories as well.
[amir] A directory that was just copied up does not have the OVL_WHITEOUTS
flag. We need to set it to fix merge dir iteration.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This fixes a lockdep splat when mounting a nested overlayfs.
Fixes: a015dafcaf ("ovl: use ovl_inode mutex to synchronize...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With index=on, ovl_indexdir_cleanup() tries to cleanup invalid index
entries (e.g. bad index name). This behavior could result in cleaning of
entries created by newer kernels and is therefore undesirable.
Instead, abort mount if such entries are encountered. We still cleanup
'stale' entries and 'orphan' entries, both those cases can be a result
of offline changes to lower and upper dirs.
When encoutering an index entry of type directory or whiteout, kernel
was supposed to fallback to read-only mount, but the fill_super()
operation returns EROFS in this case instead of returning success with
read-only mount flag, so mount fails when encoutering directory or
whiteout index entries. Bless this behavior by returning -EINVAL on
directory and whiteout index entries as we do for all unsupported index
entries.
Fixes: 61b674710c ("ovl: do not cleanup directory and whiteout index..")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Treat ENOENT from index entry lookup the same way as treating a returned
negative dentry. Apparently, either could be returned if file is not
found, depending on the underlying file system.
Fixes: 359f392ca5 ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Commit fbaf94ee3c ("ovl: don't set origin on broken lower hardlink")
attempt to avoid the condition of non-indexed upper inode with lower
hardlink as origin. If this condition is found, lookup returns EIO.
The protection of commit mentioned above does not cover the case of lower
that is not a hardlink when it is copied up (with either index=off/on)
and then lower is hardlinked while overlay is offline.
Changes to lower layer while overlayfs is offline should not result in
unexpected behavior, so a permanent EIO error after creating a link in
lower layer should not be considered as correct behavior.
This fix replaces EIO error with success in cases where upper has origin
but no index is found, or index is found that does not match upper
inode. In those cases, lookup will not fail and the returned overlay inode
will be hashed by upper inode instead of by lower origin inode.
Fixes: 359f392ca5 ("ovl: lookup index entry for copy up origin")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The error code is missing here so it means we return ERR_PTR(0) or NULL.
The other error paths all return an error code so this probably should
as well.
Fixes: 02b69b284c ("ovl: lookup redirects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This was detected by fault injection test
Signed-off-by: Hirofumi Nakagawa <nklabs@gmail.com>
Fixes: 13cf199d00 ("ovl: allocate an ovl_inode struct")
Cc: <stable@vger.kernel.org> # v4.13
Enforcing exclusive ownership on upper/work dirs caused a docker
regression: https://github.com/moby/moby/issues/34672.
Euan spotted the regression and pointed to the offending commit.
Vivek has brought the regression to my attention and provided this
reproducer:
Terminal 1:
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
Terminal 2:
unshare -m
Terminal 1:
umount merged
mount -t overlay -o workdir=work,lowerdir=lower,upperdir=upper none
merged/
mount: /root/overlay-testing/merged: none already mounted or mount point
busy
To fix the regression, I replaced the error with an alarming warning.
With index feature enabled, mount does fail, but logs a suggestion to
override exclusive dir protection by disabling index.
Note that index=off mount does take the inuse locks, so a concurrent
index=off will issue the warning and a concurrent index=on mount will fail.
Documentation was updated to reflect this change.
Fixes: 2cac0c00a6 ("ovl: get exclusive ownership on upper/work dirs")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Euan Kemp <euank@euank.com>
Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use the ovl_lock_rename_workdir() helper which requires
unlock_rename() only on lock success.
Fixes: ("fd210b7d67ee ovl: move copy up lock out")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
index dentry was not released when breaking out of the loop
due to index verification error.
Fixes: 415543d5c6 ("ovl: cleanup bad and stale index entries on mount")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
GFP_TEMPORARY was introduced by commit e12ba74d8f ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull overlayfs updates from Miklos Szeredi:
"This fixes d_ino correctness in readdir, which brings overlayfs on par
with normal filesystems regarding inode number semantics, as long as
all layers are on the same filesystem.
There are also some bug fixes, one in particular (random ioctl's
shouldn't be able to modify lower layers) that touches some vfs code,
but of course no-op for non-overlay fs"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix false positive ESTALE on lookup
ovl: don't allow writing ioctl on lower layer
ovl: fix relatime for directories
vfs: add flags to d_real()
ovl: cleanup d_real for negative
ovl: constant d_ino for non-merge dirs
ovl: constant d_ino across copy up
ovl: fix readdir error value
ovl: check snprintf return
Commit b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up origin")
verifies that the origin lower inode stored in the overlayfs inode matched
the inode of a copy up origin dentry found by lookup.
There is a false positive result in that check when lower fs does not
support file handles and copy up origin cannot be followed by file handle
at lookup time.
The false negative happens when finding an overlay inode in cache on a
copied up overlay dentry lookup. The overlay inode still 'remembers' the
copy up origin inode, but the copy up origin dentry is not available for
verification.
Relax the check in case copy up origin dentry is not available.
Fixes: b9ac5c274b ("ovl: hash overlay non-dir inodes by copy up...")
Cc: <stable@vger.kernel.org> # v4.13
Reported-by: Jordi Pujol <jordipujolp@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to treat non-regular overlayfs files the same as regular files when
checking for an atime update.
Add a d_real() flag to make it return the upper dentry for all file types.
Reported-by: "zhangyi (F)" <yi.zhang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
d_real() is never called with a negative dentry. So remove the
d_is_negative() check (which would never trigger anyway, since d_is_reg()
returns false for a negative dentry).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
While we could replace the smp_mb__before_spinlock() with the new
smp_mb__after_spinlock(), the normal pattern is to use
smp_store_release() to publish an object that is used for
lockless_dereference() -- and mirrors the regular rcu_assign_pointer()
/ rcu_dereference() patterns.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Impure directories are ones which contain objects with origins (i.e. those
that have been copied up). These are relevant to readdir operation only
because of the d_ino field, no other transformation is necessary. Also a
directory can become impure between two getdents(2) calls.
This patch creates a cache for impure directories. Unlike the cache for
merged directories, this one only contains entries with origin and is not
refcounted but has a its lifetime tied to that of the dentry.
Similarly to the merged cache, the impure cache is invalidated based on a
version number. This version number is incremented when an entry with
origin is added or removed from the directory.
If the cache is empty, then the impure xattr is removed from the directory.
This patch also fixes up handling of d_ino for the ".." entry if the parent
directory is merged.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When all layers are on the same fs, and iterating a directory which may
contain copy up entries, call vfs_getattr() on the overlay entries to make
sure that d_ino will be consistent with st_ino from stat(2).
There is an overhead of lookup per upper entry in readdir.
The overhead is minimal if the iterated entries are already in dcache. It
is also quite useful for the common case of 'ls -l' that readdir() pre
populates the dcache with the listed entries, making the following stat()
calls faster.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
actor's return value is taken as a bool (filled/not filled) so we need to
return the error in the context.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Index should always be of the same file type as origin, except for
the case of a whiteout index. A whiteout index should only exist
if all lower aliases have been unlinked, which means that finding
a lower origin on lookup whose index is a whiteout should be treated
as a lookup error.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Amir Goldstein
Nicolas Schier
Arnd Bergmann
Miklos Szeredi
Thomas Gleixner
Linus Torvalds
Jiufei Xue
Al Viro
Vivek Goyal
Darrick J. Wong
Chengguang Xu
Wei Yongjun
Miklos Szeredi
Kees Cook
Deepa Dinamani
Fengguang Wu
Vasyl Gomonovych
Chengguang Xu
Chandan Rajendra
zhangyi (F)
Ingo Molnar
Will Deacon
Dan Carpenter
Hirofumi Nakagawa
Michal Hocko
Peter Zijlstra