of_match_device could return NULL, and so cause a NULL pointer
dereference later at line 850:
mdma->soc = match->data;
For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.
This was reported by coverity (CID 1324134)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
When terminating for_each_compatible_node() iteration with
break or return, of_node_put() should be used to prevent
stale device node references from being left behind.
Found by Coccinelle.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In a very tight timeframe, the debug message in the transfer completion
handler can be misleading, as the completion test report can change just
after the message, and the code flow cannot be deduced from the debug
message.
This is just a cleanup to make debugging easier.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In the case where a descriptor is chained on a running channel, and as
explained in the comment in the code 10 lines above, the success of the
chaining is ensured either if :
- the DMA is still running
- or if the chained transfer is completed
Unfortunately the transfer completness test was done on the descriptor
to which the transfer was chained, and not the transfer being chained at
the end, ie. hot-chained.
This corner case is extremely hard to trigger, as usually the DMA chain
is still running, and the first case takes care of returning success of
the hot-chaining. It was seen by hot-chaining several "small transfers"
to a running "big transfer", not in a real-life usecase but by testing
the robustness of the driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1
because CHCR.NULLE is set to 1. So, this driver should call
usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise,
the desc is possible to be NULL in the usb_dmac_isr_transfer_end().
Fixes: 0c1c8ff32f ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver)
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This time we have bit of largish changes:
New drivers:
- Xilinx zynqmp dma engine driver.
- Marvell xor2 driver.
Updates:
- dmatest sg support.
- updates and enhancements to Xilinx drivers, adding of cyclic mode.
- clock handling fixes across drivers.
- removal of OOM messages on kzalloc across subsystem.
- interleaved transfers support in omap driver.
- runtime pm support in qcom bam dma.
- tasklet kill freeup across drivers.
- irq cleanup on remove across drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXmZj8AAoJEHwUBw8lI4NHANYP/0e7LkiopiBdxKyYNwViyrfL
XGsB3Fcd8MvYnojzlRUNUi5dt86YfXM5JixMWg8e2WeDSK9AXBEpRBHlEJXA7FNn
/BXy8FZxW4YkXOBSOL+GbDgC48CRiQrmoHSsYE1e9qosJTTpDJlTMd0I3EmdAK53
wjNKBYGv5ORNMXdYXJe/6uUqbN0QT7Qr7a9+Q1qgwhF1wd8pKjVXvDD6Qj2NeM8L
OCySngBECDWTCEYpuNXHbtp/s8QpWteGwCTyQYTkuNsFYM2H3nQCXi9ObMOGR9IN
44FpLgeLeIgW03F/1DmVvMWDYgCgow+b1usqHRWC7x33K/ArqzZzAsPyKePqOBU5
B9zzAla+/QKi73mKauqgHl/Siokr9FZdFpvTVWf2ssm/k3b3GJMO9tPPJ2ocyvZ6
lwlHrTMOV9n2tzeBkkadgLPWO6yDlcYlDVjj1P36DzC88GhjEfFOlq3tqcEJWxmR
adDFX2yRXdtpA6XSiI9l7jxUHxBWZwOTPJ6h1gznk/wVVd0TjyzZteX2gPc8lkcL
Aedhyx0zgGl5bE4+eBsNKLiOrUj468j7Cb87Hhe4YygDw/2T2Ff5RDGxQ9iRrkCb
YRPP21453VS01GuF2T1vzziJ/tGl8IwIon1EOSsTXuImH1sm7Or3W+Cyrke9AZgo
0M8kfHJ2EfcRnwHE8N2H
=tYp0
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This time we have bit of largish changes: two new drivers, bunch of
updates and cleanups to existing set. Nothing super exciting though.
New drivers:
- Xilinx zynqmp dma engine driver
- Marvell xor2 driver
Updates:
- dmatest sg support
- updates and enhancements to Xilinx drivers, adding of cyclic mode
- clock handling fixes across drivers
- removal of OOM messages on kzalloc across subsystem
- interleaved transfers support in omap driver
- runtime pm support in qcom bam dma
- tasklet kill freeup across drivers
- irq cleanup on remove across drivers"
* tag 'dmaengine-4.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (94 commits)
dmaengine: k3dma: add missing clk_disable_unprepare() on error in k3_dma_probe()
dmaengine: zynqmp_dma: add missing MODULE_LICENSE
dmaengine: qcom_hidma: use for_each_matching_node() macro
dmaengine: zynqmp_dma: Fix static checker warning
dmaengine: omap-dma: Support for interleaved transfer
dmaengine: ioat: statify symbol
dmaengine: pxa_dma: implement device_synchronize
dmaengine: imx-sdma: remove assignment never used
dmaengine: imx-sdma: remove dummy assignment
dmaengine: cppi: remove unused and bogus check
dmaengine: qcom_hidma_lli: kill the tasklets upon exit
dmaengine: pxa_dma: remove owner assignment
dmaengine: fsl_raid: remove owner assignment
dmaengine: coh901318: remove owner assignment
dmaengine: qcom_hidma: kill the tasklets upon exit
dmaengine: txx9dmac: explicitly freeup irq
dmaengine: sirf-dma: kill the tasklets upon exit
dmaengine: s3c24xx: kill the tasklets upon exit
dmaengine: s3c24xx: explicitly freeup irq
dmaengine: pl330: explicitly freeup irq
...
Add the missing clk_disable_unprepare() before return
from k3_dma_probe() in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
We get a warning about the missing MODULE_LICENSE tag for this newly
added driver module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/xilinx/zynqmp_dma.o
see include/linux/module.h for more information
This adds a "GPL" license, matching the "version 2 or later" information in
the comment at the start of the file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Use for_each_matching_node() macro instead of open coding it.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Initial support for interleaved transfer with sDMA.
The implementation only supports DMA_MEM_TO_MEM and frame_size must be 1.
sDMA needs to be configured for double indexing when ICG is needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Sparse warns:
drivers/dma/ioat/init.c:1215:6: warning: symbol 'ioat_resume' was not declared. Should it be static?
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Implement the function which wait until a dma channel is stopped to have
a synchronization point.
This also protects the pxad_remove() from races, such as spurious
interrupts while removing the driver, because :
- as long as there is one dma channel requested, ie. dma_chan_get() but
no dma_chan_put(), the try_module_get() of dma_chan_get() prevents
the remove() routine from running
- when the last channel is released, ie. the last dma_chan_put() is
called, if there is a running DMA, pxad_synchronize() is called
- pxad_synchronize() waits for the channel to stop, which in turn
ensures on pxa architecture that the interrupt cannot be fired anymore
Reported-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
David reported:
[drivers/dma/imx-sdma.c:769]: (style) Variable 'emi_2_emi' is assigned a value that is never used
Since emi_2_emi is never used afterwards, remove thsi as well
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
David reported:
drivers/dma/imx-sdma.c:1003]: (style) Same expression on both sides of '|='
ORing with itself yields same result, So remove this
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In cppi41_dma_prep_slave_sg() variable num is initialized to zero, but never
updated and a BUG_ON is checked for it being greater than zero which will be
always false.
Remove the bogus check and this variable
Reported-by: David Binderman <linuxdev.baldrick@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
debugfs file operations owner is set by core, so remove
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Sinan Kaya <okaya@codeaurora.org>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Barry Song <Baohua.Song@csr.com>
drivers should ensure that tasklets are killed, so that they can't be
executed after driver remove is executed, so ensure they are killed.
This driver used vchan tasklets, so those need to be killed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Mario Six <mario.six@gdsys.cc>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Sparse complains:
drivers/dma/mmp_tdma.c:407:22: warning: symbol 'mmp_tdma_alloc_descriptor' was not declared. Should it be static?
drivers/dma/mmp_tdma.c:595:17: warning: symbol 'mmp_tdma_xlate' was not declared. Should it be static?
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Qiao Zhou <zhouqiao@marvell.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
drivers should ensure that tasklets are killed, so that they can't be
executed after driver remove is executed, so ensure they are killed.
This driver used vchan tasklets, so those need to be killed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jingchang Lu <b35083@freescale.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
drivers should ensure that tasklets are killed, so that they can't be
executed after driver remove is executed, so ensure they are killed.
This driver used vchan tasklets, so those need to be killed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
size_t should be printed with %zu, not %lu as driver did, so fix these
warning by doing this change
drivers/dma/fsl_raid.c: In function 'fsl_re_prep_dma_genq':
drivers/dma/fsl_raid.c:341:4: warning: format '%lu' expects argument of type
'long unsigned int', but argument 3 has type 'size_t' [-Wformat=]
len, FSL_RE_MAX_DATA_LEN);
^
drivers/dma/fsl_raid.c: In function 'fsl_re_prep_dma_pq':
drivers/dma/fsl_raid.c:428:4: warning: format '%lu' expects argument of type
'long unsigned int', but argument 3 has type 'size_t' [-Wformat=]
len, FSL_RE_MAX_DATA_LEN);
^
drivers/dma/fsl_raid.c: In function 'fsl_re_prep_dma_memcpy':
drivers/dma/fsl_raid.c:549:4: warning: format '%lu' expects argument of type
'long unsigned int', but argument 3 has type 'size_t' [-Wformat=]
len, FSL_RE_MAX_DATA_LEN);
^
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Xuelin Shi <xuelin.shi@freescale.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: Jingchang Lu <b35083@freescale.com>
Cc: Peter Griffin <peter.griffin@linaro.org>
drivers should ensure that tasklets are killed, so that they can't be
executed after driver remove is executed, so ensure they are killed.
This driver used vchan tasklets, so those need to be killed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Sparse complains:
drivers/dma/coh901318.c:269:30: warning: symbol 'chan_config' was not declared. Should it be static?
drivers/dma/coh901318.c:2806:12: warning: symbol 'coh901318_init' was not declared. Should it be static?
drivers/dma/coh901318.c:2812:13: warning: symbol 'coh901318_exit' was not declared. Should it be static?
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
drivers should ensure that tasklets are killed, so that they can't be
run after driver remove is executed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
dmaengine device should explicitly call devm_free_irq() when using
devm_request_irq().
The irq is still ON when devices remove is executed and irq should be
quiesced before remove is completed.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
This patch updates the dmatest client to
Support scatter-gather dma mode.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
LABBE Corentin
Wei Yongjun
Robert Jarzmik
Yoshihiro Shimoda
Linus Torvalds
Vinod Koul
Wei Yongjun
Arnd Bergmann
Kedareswara rao Appana
Peter Ujfalusi