Similar to commit 111d0bda8e ("tools/kvm_stat: Exempt time-based
counters"), we should not show timer values in kvm_stat. Remove the new
halt_wait_ns.
Fixes: 87bcc5fa09 ("KVM: stats: Add halt_wait_ns stats for all architectures")
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Stefan Raspl <raspl@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Makes the dash in front of option '-z' disappear in the generated
man-page.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210506140352.4178789-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210325122949.1433271-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new counters halt_poll_success_ns and halt_poll_fail_ns do not count
events. Instead they provide a time, and mess up our statistics. Therefore,
we should exclude them.
Removal is currently implemented with an exempt list. If more counters like
these appear, we can think about a more general rule like excluding all
fields name "*_ns", in case that's a standing convention.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Tested-and-reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20201208210829.101324-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a sample unit file as a basis for systemd integration of kvm_stat
logs.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To integrate with logrotate, we have a signal handler that will re-open
the logfile.
Assuming we have a systemd unit file with
ExecStart=kvm_stat -dtc -s 10 -L /var/log/kvm_stat.csv
ExecReload=/bin/kill -HUP $MAINPID
and a logrotate config featuring
postrotate
/bin/systemctl reload kvm_stat.service
endscript
Then the overall flow will look like this:
(1) systemd starts kvm_stat, logging to A.
(2) At some point, logrotate runs, moving A to B.
kvm_stat continues to write to B at this point.
(3) After rotating, logrotate restarts the kvm_stat unit via systemctl.
(4) The kvm_stat unit sends a SIGHUP to kvm_stat, finally making it
switch over to writing to A again.
Note that in order to keep the structure of the cvs output in tact, we
make sure to, in contrast to the standard log format, only write the
header once at the beginning of a file. This implies that the header is
suppressed when appending to an existing file. Unlike with the standard
format, where we append to an existing file by starting out with a
header.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running in logging mode, skip records with all zeros (=empty records)
to preserve space when logging to files.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an alternative format that can be more easily used for further
processing later on.
Note that we add a timestamp in the first column for both, the regular
and the new csv format.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-5-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This now controls both, the refresh rate of the interactive mode as well
as the logging mode. Which, as a consequence, means that the default of
logging mode is now 3s, too (use command line switch '-s' to adjust to
your liking).
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
optparse is deprecated for a while, hence switching over to argparse
(which also works with python2).
As a consequence, help output has some subtle changes, the most
significant one being that the options are all listed explicitly
instead of a universal '[options]' indicator. Also, some of the error
messages are phrased slightly different.
While at it, squashed a number of minor PEP8 issues.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure command line arguments are sorted alphabetically
everywhere, and adjusted existing texts for interactive command 's' to
become consistent with the long form --set-delay.
Throwing in some PEP8 fixes (all cosmetics) for good measure.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The filter name is fixed to "exit_reason" for some kvm_exit events, no
matter what architect we have. Actually, the filter name ("exit_reason")
is only applicable to x86, meaning it's broken on other architects
including aarch64.
This fixes the issue by providing various kvm_exit filter names, depending
on architect we're on. Afterwards, the variable filter name is picked and
applied through ioctl(fd, SET_FILTER).
Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2 see
the copying file in the top level directory
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 35 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:
kvm statistics - summary
regex filter: instruction_diag_44
Event Total %Total CurAvg/s
exit_instruction 276 100.0 12
instruction_diag_44 256 92.8 11
Total 276 12
Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current shebang does not work in environments that only support python3
and have no python2 installed. Plus there does not seem to be a way to
support python2 and python3 at the same time. Since all known python3 issues
were fixed, and as python3 is the way to go, let's switch over.
Note that the code is still python2 compliant, so folks in bad use can
simply revert the shebang.
Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently display the default number of decimal places for floats in
_show_set_update_interval(), which is quite pointless. Cutting down to a
single decimal place.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When filtering by guest (interactive commands 'p'/'g'), and the respective
guest was destroyed, detect when the guest is up again through the guest
name if possible.
I.e. when displaying events for a specific guest, it is not necessary
anymore to restart kvm_stat in case the guest is restarted.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
For destroyed guests, kvm_stat essentially freezes with the last data
displayed. This is acceptable for users, in case they want to inspect the
final data. But it looks a bit irritating. Therefore, detect this situation
and display a respective indicator in the header.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When running with the DebugFS provider, removal of a guest can result in a
negative CurAvg/s, which looks rather confusing.
If so, suppress the body refresh and print a message instead.
To reproduce, have at least one guest A completely booted. Then start
another guest B (which generates a huge amount of events), then destroy B.
On the next refresh, kvm_stat should display a whole lot of negative values
in the CurAvg/s column.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When setting a PID filter in debugfs, we unnecessarily reset the
statistics, although there is no reason to do so. This behavior was
merely introduced with commit 9f114a03c6 "tools/kvm_stat: add
interactive command 'r'", most likely to mimic the behavior of
the tracepoints provider in this respect. However, there are plenty
of differences between the two providers, so there is no reason not
to take advantage of the possibility to filter by PID without
resetting the statistics.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
With pid filtering active, when a guest is removed e.g. via virsh shutdown,
successive updates produce garbage.
Therefore, we add code to detect this case and prevent further body updates.
Note that when displaying the help dialog via 'h' in this case, once we exit
we're stuck with the 'Collecting data...' message till we remove the filter.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Python3 returns a float for a regular division - switch to a division
operator that returns an integer.
Furthermore, filters return a generator object instead of the actual
list - wrap result in yet another list, which makes it still work in
both, Python2 and 3.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
$ python3 tools/kvm/kvm_stat/kvm_stat
Traceback (most recent call last):
File "tools/kvm/kvm_stat/kvm_stat", line 1668, in <module>
main()
File "tools/kvm/kvm_stat/kvm_stat", line 1639, in main
assign_globals()
File "tools/kvm/kvm_stat/kvm_stat", line 1618, in assign_globals
for line in file('/proc/mounts'):
NameError: name 'file' is not defined
open() is the python3 way, and works on python2.6+
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-and-tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
$ python3 tools/kvm/kvm_stat/kvm_stat
File "tools/kvm/kvm_stat/kvm_stat", line 1137
def sortkey((_k, v)):
^
SyntaxError: invalid syntax
Fix it in a way that's compatible with python2 and python3
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Stefan Raspl <stefan.raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The 'Total' line looks a bit weird when we have a single event only. This
can happen e.g. due to filters. Therefore suppress when there's only a
single event in the output.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We keep the current logic that sorts all events (parent and child), but
re-shuffle the events afterwards, grouping the children after the
respective parent. Note that the percentage column for child events
gives the percentage of the parent's total.
Since we rework the logic anyway, we modify the total average
calculation to use the raw numbers instead of the (rounded) averages.
Note that this can result in differing numbers (between total average
and the sum of the individual averages) due to rounding errors.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drilldown (i.e. toggle display of child trace events) was implemented by
overriding the fields filter. This resulted in inconsistencies: E.g. when
drilldown was not active, adding a filter that also matches child trace
events would not only filter fields according to the filter, but also add
in the child trace events matching the filter. E.g. on x86, setting
'kvm_userspace_exit' as the fields filter after startup would result in
display of kvm_userspace_exit(DCR), although that wasn't previously
present - not exactly what one would expect from a filter.
This patch addresses the issue by keeping drilldown and fields filter
separate. While at it, we also fix a PEP8 issue by adding a blank line
at one place (since we're in the area...).
We implement this by adding a framework that also allows to define a
taxonomy among the debugfs events to identify child trace events. I.e.
drilldown using 'x' can now also work with debugfs. A respective parent-
child relationship is only known for S390 at the moment, but could be
added adjusting other platforms' ARCH.dbg_is_child() methods
accordingly.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can do with a single dialog that takes both, pids and guest names.
Note that we keep both interactive commands, 'p' and 'g' for now, to
avoid confusion among users used to a specific key.
While at it, we improve on some minor glitches regarding curses usage,
e.g. cursor still visible when not supposed to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helps quite a bit reading the code when it's obvious when a method is
intended for internal use only.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Te checks for debugfs assumed that debugfs is always mounted at
/sys/kernel/debug - which is likely, but not guaranteed. This is addressed
by checking /proc/mounts for the actual location.
Furthermore, when debugfs was mounted, but the kvm module not loaded, a
misleading error pointing towards debugfs not present was given.
To reproduce,
(a) run kvm_stat with debugfs mounted at a place different from
/sys/kernel/debug
(b) run kvm_stat with debugfs mounted but kvm module not loaded
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Entering an invalid regular expression did not produce any indication of an
error so far.
To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket).
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we apply a filter that will only leave child trace events, we
receive a ZeroDivisionError when calculating the percentages.
In that case, provide percentages based on child events only.
To reproduce, run 'kvm_stat -f .*[\(].*'.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use '==' for equality checks and 'is' when comparing identities.
An example where '==' and 'is' behave differently:
>>> a = 4242
>>> a == 4242
True
>>> a is 4242
False
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If it's clear that the values of a dictionary will be used then use
the '.items()' method.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
[Include fix for logging mode by Stefan Raspl]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a namedtuple for storing the values as it allows to access the
fields of a tuple via names. This makes the overall code much easier
to read and to understand. Access by index is still possible as
before.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'sortkey' function references a value in its enclosing
scope (closure). This is not common practice for a sort key function
so let's replace it. Additionally, the function 'sorted' has already a
parameter for reversing the result therefore the inversion of the
values is unneeded. The check for stats[x][1] is also superfluous as
it's ensured that this value is initialized with 0.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sort the fields returned by specifying '-f help' on the command line.
While at it, simplify the code a bit, indent the output and eliminate an
extra blank line at the beginning.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a line for the total number of events and current average at the
bottom of the body.
Note that both values exclude child trace events. I.e. if drilldown is
activated via interactive command 'x', only the totals are accounted, or
we'd be counting these twice (see previous commit "tools/kvm_stat: fix
child trace events accounting").
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unhandled arguments, which could easily include typos, are simply
ignored. We should be strict to avoid undetected typos.
To reproduce start kvm_stat with an extra argument, e.g.
'kvm_stat -d bnuh5ol' and note that this will actually work.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Errors while parsing the '-g' command line argument result in display of
usage information prior to the error message. This is a bit confusing,
as the command line is syntactically correct.
To reproduce, run 'kvm_stat -g' and specify a non-existing or inactive
guest.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Passing an invalid regular expression on the command line results in a
traceback. Note that interactive specification of invalid regular
expressions is not affected
To reproduce, run "kvm_stat -f '*'".
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The man page update for this new functionality was omitted.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Child trace events were included in calculation of the overall total,
which is used for calculation of the percentages of the '%Total' column.
However, the parent trace envents' stats summarize the child trace
events, hence we'd incorrectly account for them twice, leading to
slightly wrong stats.
With this fix, we use the correct total. Consequently, the sum of the
child trace events' '%Total' column values is identical to the
respective value of the respective parent event. However, this also
means that the sum of the '%Total' column values will aggregate to more
than 100 percent.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 67fbcd62f5 ("tools/kvm_stat: add '-f help' to get the available
event list") added support for '-f help'. However, the extra handling of
'help' will also take effect when 'help' is specified as a regex in
interactive mode via 'f'. This results in display of all events while
only those matching this regex should be shown.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When updating the fields filter, tracepoint events of fields previously
not visible were not enabled, as TracepointProvider.update_fields()
updated the member variable directly instead of using the setter, which
triggers the event enable/disable.
To reproduce, run 'kvm_stat -f kvm_exit', press 'c' to remove the
filter, and notice that no add'l fields that do not match the regex
'kvm_exit' will appear.
This issue was introduced by commit c469117df0 ("tools/kvm_stat:
simplify initializers").
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When displaying debugfs events listed by guests, an attempt to switch to
reporting of stats for individual child trace events results in garbled
output. Reason is that when toggling drilldown, the update of the stats
doesn't honor when events are displayed by guests, as indicated by
Tui._display_guests.
To reproduce, run 'kvm_stat -d' and press 'b' followed by 'x'.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Specifying a guest via '-g foo' always results in an error:
$ kvm_stat -g foo
Usage: kvm_stat [options]
kvm_stat: error: Error while searching for guest "foo", use "-p" to
specify a pid instead
Reason is that Tui.get_pid_from_gname() is not static, as it is supposed
to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
=593n
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
Christian Borntraeger
Stefan Raspl
Stefan Raspl
Gavin Shan
Thomas Gleixner
Stefan Raspl
Cole Robinson
Marc Hartmayer
Linus Torvalds