Граф коммитов

4981 Коммитов

Автор SHA1 Сообщение Дата
Darius Augulis 3fa6dd6a7a MX1ADS: remove I2C ifdefs
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16 12:57:15 +02:00
Ilya Yanok 248ca85f01 qong: remove AIPS[12] mappings from machine-specific iotable
AIPS[12] are no mapped from generic MX3 code so we don't need to
map them from machine-specific map_io function anymore.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
2009-04-16 12:57:15 +02:00
Mark Brown 9070e7afb8 mx31ads: imoux pins should be passed in as unsigned int
To match the mxc_iomux_setup_multiple_pins() prototype.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-16 12:57:15 +02:00
Paulius Zaleckas 470f9b602e MXC: remove orphan imx_init_uart() definition
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:14 +02:00
Valentin Longchamp d5f281043a mx31: pin definition for csi
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16 12:57:14 +02:00
Valentin Longchamp c44af41ad5 MX31: pin definition for sdhc2
This also adds the pins used on mx31moboard for WP and CD

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16 12:57:14 +02:00
Vladimir Barinov c5c96f4dce MX31: Add I2C pin definitions
Add I2C pin definitions for MX31 SoC

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
2009-04-16 12:57:13 +02:00
Sascha Hauer 4bd962987d MX31: Add more alternate pin definitions
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Sascha Hauer f8e5143be7 pcm037 board support: Fix eth interrupt gpio setting
gpio_direction_input needs the gpio number, not the pin description.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16 12:57:13 +02:00
Holger Schurig 1b3c9bf2cd imx21: activate i2c
Set the correct clkdev-name for the i2c clock.

It also get's rid of the ARCH_NR_GPIOS define on the rationale
that isn't an ARCH-wide setting anyway. If a device has two
pca953x devices, the reserved number will be wrong.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:13 +02:00
Holger Schurig 289a689b10 imx21: fixes some clocknames
Signed-off-by: <hs4233@mail.mn-solutions.de>
2009-04-16 12:57:12 +02:00
Ben Dooks db75639406 [ARM] S3C: Export s3c_gpio_cfgpin and s3c_gpio_setpull for modules
Add an export of the two GPIO configuration calls
s3c_gpio_cfgpin and s3c_gpio_setpull to allow modules
to use them (such as ASoC drivers)

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 11:52:02 +01:00
Ben Dooks ea5a6fd810 [ARM] s3c2410_defconfig: Update miscellaneous drivers
Update the driver build in the s3c2410_defconfig for the
LED, IDE, Input and EEPROM options

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:24 +01:00
Ben Dooks f8832a988c [ARM] s3c2410_defconfig: Update USB device drivers
Add more USB device driver options to the s3c2410_defconfig,
mostly as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:23 +01:00
Ben Dooks 89d44a0f00 [ARM] s3c2410_defconfig: Update filesystem options
Update the filesystem options in the s3c2410_defconfig,
such as building ext4, enable the automounter as modules
and update the network filesysyem choices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:23 +01:00
Ben Dooks f04121e457 [ARM] s3c2410_defconfig: Add video/radio drivers
Add a set of various video and radio drivers to the
s3c2410_defconfig as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:22 +01:00
Ben Dooks 68c468c9d0 [ARM] s3c2410_defconfig: Add sound drivers
Add sound drivers to the s3c2410_defconfig.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-16 10:34:21 +01:00
eric miao cbb55092a6 [ARM] 5453/1: fix building breakage of sys_oabi-compat.c due to missing kmalloc/kfree
It seems that declarations of kmalloc/kfree are missed, explicitly
include it.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-16 10:07:45 +01:00
Ben Dooks 121613e431 [ARM] s3c2410_defconfig: Add MMC/SD core and drivers
Add SD/MMC to the s3c2410_defconfig, building in the core
and adding the rest of the drivers as modules.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 15:12:11 +01:00
Ben Dooks 2ba4d47210 [ARM] s3c2410_defconfig: Update machine configuration
Update the machine configuration of s3c2410_defconfig to
add support for newer machines, and update the s3c24xx
specific options.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 15:02:47 +01:00
Ben Dooks 7fa6bed89a [ARM] s3c2410_defconfig: Update network options
Update the list of modules being built for the network
core of the s3c2410_defconfig. This update adds such
items as TCP congestion, netfilter for IPv4 and IPv6.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 15:00:18 +01:00
Ben Dooks 0288421836 [ARM] s3c2410_defconfig: update to 2.6.30-rc2
Update arch/arm/configs/s3c2410_defconfig to the
latest kernel release (2.6.30-rc2).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 14:56:33 +01:00
Mark Brown b7f9a94bf2 [ARM] SMDK6410: Request GPIOs for LCD power control
Going forward gpio_request() will be a requirement for GPIO API users so
call it for the LCD power GPIOs. With present code the kernel functions
but generaets loud WARN_ON()s when using the unrequested GPIOs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 14:46:03 +01:00
Huang Weiyi acd216a15d [ARM] S3C: remove duplicated #include
Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 14:46:03 +01:00
Hartley Sweeten d5565f76d3 [ARM] 5451/1: ep93xx:core.c: build warning fix
Fix trivial build warning due to incompatible pointer type.

ep93xx_timer_interrupt() has the wrong return type causing a
warning during the build.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-15 10:01:03 +01:00
Aaro Koskinen 7fccfc00c0 [ARM] 5450/1: Flush only the needed range when unmapping a VMA
When unmapping N pages (e.g. shared memory) the amount of TLB flushes
done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it should be N at
maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8 pages, so there is a
noticeable performance penalty when unmapping a large VMA and the system
is spending its time in flush_tlb_range().

The problem is that tlb_end_vma() is always flushing the full VMA
range. The subrange that needs to be flushed can be calculated by
tlb_remove_tlb_entry(). This approach was suggested by Hugh Dickins,
and is also used by other arches.

The speed increase is roughly 3x for 8M mappings and for larger mappings
even more.

Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-15 10:01:02 +01:00
Russell King 9fa264d0d3 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-15 09:58:21 +01:00
Robert Jarzmik cc8d2730ad [ARM] pxa/mioa701: use GPIO95 as AC97 reset line
MioA701 board's GPIO95 is the AC97 line. The other GPIO113
is not connected to the sound chip, but to the GSM chip as a
wakeup line.

It happens that when the pxa2xx_ac97 driver reconfigures the
gpio as an "out gpio" for AC97 reset (bug workaround), it
hangs the GSM chip.

As AC97 platform data now enables to specify the AC97 reset
line, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15 10:54:06 +08:00
Mark Brown eae17754ab [ARM] pxa: merge AC97 platform data structures
Currently there are two possible platform datas for the PXA AC97 driver:
one supported by the generic AC97 driver only which provides callbacks
to allow board-specific configuration at stream startup and teardown,
and another for pxa2xx-ac97-lib which allows configuration of the reset
GPIO for PXA2xx CPUs.

Obviously this won't actually work when using the generic AC97 driver
since the drivers will attempt to parse the platform data in both
formats. Fix this by merging the two structures.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15 10:54:06 +08:00
Huang Weiyi 6845a658e0 [ARM] pxa/em-x270: remove duplicated #include
Remove duplicated #include in arch/arm/mach-pxa/em-x270.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-14 22:55:36 +08:00
Mike Rapoport bd9d074098 [ARM] pxa/em-x270: explicitly set .gpio_cs in TDO35S SPI chip data
After commit a7bb3909b3 ("spi: pxa2xx_spi:
introduce chipselect GPIO to simplify the common cases") the .gpio_cs
field in pxa2xx_spi_chip has to be set explicitly.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-14 22:55:36 +08:00
Yang Hongyang e930438c42 Replace all DMA_nBIT_MASK macro with DMA_BIT_MASK(n)
This is the second go through of the old DMA_nBIT_MASK macro,and there're not
so many of them left,so I put them into one patch.I hope this is the last round.
After this the definition of the old DMA_nBIT_MASK macro could be removed.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg KH <greg@kroah.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:33 -07:00
Marek Vasut efb12cd20a [ARM] pxa: PalmTX and PalmT5 USB fixes
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-13 12:10:58 +08:00
Marek Vasut 918c71c0ff [ARM] pxa: add missing declaration of pxa26x_init_irq()
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-13 12:10:36 +08:00
Eric Miao 0e983d3c38 [ARM] pxa/colibri: fix missing variable name in inline functions
Even they are empty inline functions, the compiler still complains
about the missing variable names.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Daniel Mack <daniel@caiaq.de>
2009-04-09 14:15:00 +08:00
Linus Torvalds 139ef17a46 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array
  [ARM] 5445/1: AT91: Remove flexible array from USBH platform data
  [ARM] 5447/1: Add SZ_32K
  [ARM] omap: fix omap1 clock usecount decrement bug
  [ARM] pxa: register AC97 controller devices
  [ARM] pxa/csb701: do not register devices on non-csb726 boads
  [ARM] pxa/colibri: get rid of set_irq_type()
  [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
  [ARM] pxa/cm-x2xx: fix ucb1400 not being registered
  [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
  [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
  [ARM] pxa: Palm Tungsten E2 basic support
  [ARM] pxa/em-x270: add libertas device registration
  [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
2009-04-08 15:24:09 -07:00
Justin Waters d0176f612f [ARM] 5445/1: AT91: Remove flexible array from USBH platform data
The flexible array in the USBH platform data is not safe to copy.  The
compiler will not allocate any extra memory for the non-init platform
data structure (in the *_devices.c files) since it isn't given any
defaults at compile time.  When the probe function attempts to address
that array, it will actually attempt to access data in an adjacent
structure.

Since there are currently no (known) implementations of the at91 USBH
IP with more than 2 vbus pins, I am capping the value at 2.  If somebody
tries to assign more, then the compiler will produce a warning.

Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08 20:36:16 +01:00
Linus Walleij 8bd239d2ef [ARM] 5447/1: Add SZ_32K
This adds a SZ_32K define to the available sizes. I need it for an
upcoming platform support.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08 20:35:57 +01:00
Linus Torvalds 0e26da0f22 Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: imx: Make disable_delay a per-device variable
  i2c: xtensa s6000 i2c driver
  powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board
  i2c: i2c-mpc: make I2C bus speed configurable
  i2c: i2c-mpc: use dev based printout function
  i2c: i2c-mpc: various coding style fixes
  i2c: imx: Add missing request_mem_region in probe()
  i2c: i2c-s3c2410: Initialise Samsung I2C controller early
  i2c-s3c2410: Simplify bus frequency calculation
  i2c-s3c2410: sda_delay should be in ns, not clock ticks
  i2c: iMX/MXC support
2009-04-07 08:45:12 -07:00
Yang Hongyang 284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang 6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Eric Miao a7bb3909b3 spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases
Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs
for this.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:07 -07:00
Daniel Silverstone c564e6ae6c i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.

This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Ben Dooks a192f7153b i2c-s3c2410: sda_delay should be in ns, not clock ticks
The sda_delay field should be specified in ns, not in clock ticks
as when using cpufreq we could be changing the bus rate.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
2009-04-07 10:18:33 +01:00
Darius Augulis aa11e38ce6 i2c: iMX/MXC support
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated
in Freescale's i.MX/MXC processors.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:32 +01:00
Linus Torvalds 4ef4327b30 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (120 commits)
  cx231xx: Convert to snd_card_create()
  V4L/DVB (11440): PWC: fix build error when CONFIG_INPUT=m
  V4L/DVB (11439): UVC: uvc_status_cleanup(): undefined reference to `input_unregister_device'
  V4L/DVB (11438): au0828: fix Kconfig dependance
  V4L/DVB (11437): pvrusb2: Drop client_register/unregister stubs
  V4L/DVB (11436): radio-mr800: convert to to v4l2_device
  V4L/DVB (11435): dsbr100 radio: convert to to v4l2_device
  V4L/DVB: zr364xx: remove unused #include <version.h>
  V4L/DVB: usbvision: remove unused #include <version.h>
  V4L/DVB (11427): gspca - m5602: Minor cleanups
  V4L/DVB (11426): gspca - m5602: Don't touch hflip/vflip register on Read/Modify/Write
  V4L/DVB (11425): gspca - m5602: Move the vflip quirk to probe stage.
  V4L/DVB (11424): gspca - m5602-ov9650: Use the local ctrl cache. Adjust image on vflip.
  V4L/DVB (11423): gspca - m5602-ov9650: Add a disconnect hook, setup a ctrl cache ctrl.
  V4L/DVB (11422): gspca - m5602-ov9650: Replace a magic constant with a define
  V4L/DVB (11421): gspca - m5602-ov9650: Synthesize modesetting.
  V4L/DVB (11420): gspca - m5602: Improve error handling in the ov9650 driver
  V4L/DVB (11419): gspca - m5602-ov9650: Don't read exposure data from COM1.
  V4L/DVB (11418): gspca - m5602-ov9650: Auto white balancing is on by default
  V4L/DVB (11417): gspca - m5602-ov9650: Autogain is on by default
  ...
2009-04-06 18:11:41 -07:00
Paulius Zaleckas 6acc81c394 V4L/DVB (11350): Add camera (CSI) driver for MX1
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs.

 create mode 100644 arch/arm/mach-mx1/ksym_mx1.c
 create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S
 create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h
 create mode 100644 drivers/media/video/mx1_camera.c

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Guennadi Liakhovetski b71df97a3f V4L/DVB (11349): mx3-camera: adapt the clock definition and the driver to the new clock naming
With the i.MX31 transition to clkdev clock names have changed, but mistakenly
the "mx3-camera.0" has been registered with a non-NULL connection ID, which is
not necessary, since this is the only clock, used by the capture interface
driver. Fix the clock definition and the driver to use NULL as a connection ID.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:43:58 -03:00
Linus Torvalds 22ae77bc7a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (53 commits)
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] [NOR] Fixup for Numonyx M29W128 chips
  [MTD] mtdpart: Make ecc_stats more realistic.
  powerpc/85xx: TQM8548: Update DTS file for multi-chip support
  powerpc: NAND: FSL UPM: document new bindings
  [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays
  [MTD] [NAND] FSL-UPM: add multi chip support
  [MTD] [NOR] Add device parent info to physmap_of
  [MTD] [NAND] Add support for NAND on the Socrates board
  [MTD] [NAND] Add support for 4KiB pages.
  [MTD] sysfs support should not depend on CONFIG_PROC_FS
  [MTD] [NAND] Add parent info for CAFÉ controller
  [MTD] support driver model updates
  [MTD] driver model updates (part 2)
  [MTD] driver model updates
  [MTD] [NAND] move gen_nand's probe function to .devinit.text
  [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text
  [MTD] fix use after free in register_mtd_blktrans
  [MTD] [MAPS] Drop now unused sharpsl-flash map
  [MTD] ofpart: Check name property to determine partition nodes.
  ...

Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06 14:56:26 -07:00
Russell King 89de3820c7 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-06 09:57:38 +01:00
Russell King 3ef48fac6e [ARM] omap: fix omap1 clock usecount decrement bug
Same fix as per a7f8c59, but for OMAP1 instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-06 09:57:10 +01:00
Linus Torvalds 48f286a28f Merge branch 'for-next' of git://git.o-hand.com/linux-mfd
* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: fix da903x warning
  mfd: fix MAINTAINERS entry
  mfd: Use the value of the final spin when reading the AUXADC
  mfd: Storage class should be before const qualifier
  mfd: PASIC3: supply clock_rate to DS1WM via driver_data
  mfd: remove DS1WM clock handling
  mfd: remove unused PASIC3 bus_shift field
  pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
  mfd: convert PASIC3 to use MFD core
  mfd: convert DS1WM to use MFD core
  mfd: Support active high IRQs on WM835x
  mfd: Use bulk read to fill WM8350 register cache
  mfd: remove duplicated #include from pcf50633
2009-04-05 11:38:37 -07:00
Linus Torvalds cab4e4c43f Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-module-and-param:
  module: use strstarts()
  strstarts: helper function for !strncmp(str, prefix, strlen(prefix))
  arm: allow usage of string functions in linux/string.h
  module: don't use stop_machine on module load
  module: create a request_module_nowait()
  module: include other structures in module version check
  module: remove the SHF_ALLOC flag on the __versions section.
  module: clarify the force-loading taint message.
  module: Export symbols needed for Ksplice
  Ksplice: Add functions for walking kallsyms symbols
  module: remove module_text_address()
  module: __module_address
  module: Make find_symbol return a struct kernel_symbol
  kernel/module.c: fix an unused goto label
  param: fix charp parameters set via sysfs

Fix trivial conflicts in kernel/extable.c manually.
2009-04-05 10:30:21 -07:00
Philipp Zabel 0ef2067d0f pxa/magician: remove deprecated .bus_shift from PASIC3 platform_data
The PASIC3 driver now calculates its register spacing from the resource
size.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-04-05 00:32:21 +02:00
Mark Brown 80748fb8ff [ARM] pxa: register AC97 controller devices
The tosa, e740, e750, e800 and mioa701 all use AC97 audio codecs
but does not register the platform device for the AC97 controller.
Doing so is now required by ASoC.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 21:54:40 +08:00
Dmitry Eremin-Solenikov 675b5d869f [ARM] pxa/csb701: do not register devices on non-csb726 boads
csb701 driver can currently only be used on csb726 boards,
limit the csb701 devices registration to csb726 board.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:35 +08:00
Daniel Mack 8a28b10e91 [ARM] pxa/colibri: get rid of set_irq_type()
In commit 47cb035560, the ax88796 driver
learned to take IRQ flags from platform_device definition. Use that here
to get rid of the set_irq_type() hack.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:34 +08:00
Daniel Mack 22a0200b18 [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
In 67fca028f1, the ax88796 ethernet driver
learned a way to let the platform data hand in the MAC address. Use it
here as the original Colibri bootloader passes in a MAC address via
ATAG_SERIAL.

Reported-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:34 +08:00
Marek Vasut 50f6bb0ab7 [ARM] pxa/cm-x2xx: fix ucb1400 not being registered
This patch fixes cm-x2xx not registering the ucb1400. This is
because of the splitting of ucb1400 driver half year ago.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:34 +08:00
Marek Vasut 81854f82c5 [ARM] pxa: Add support for suspend on PalmTX, T5 and LD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:34 +08:00
Marek Vasut 8c8aa5fa30 [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:33 +08:00
Marek Vasut 54088bf50f [ARM] pxa: Palm Tungsten E2 basic support
This contains support for keypad, MMC, AC97, LCD and backlight.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 10:26:33 +08:00
Mike Rapoport c9be0e3961 [ARM] pxa/em-x270: add libertas device registration
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 08:24:39 +08:00
Philipp Zabel eb650b9ed0 [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
With this patch, the bq24022 battery charger is controlled by the USB
gadget framework (via gpio_vbus) when connected to USB.

To compile, this patch depends on the "regulator: Allow init data to be
supplied for bq24022" patch (queued for next in the regulator tree) to
add the init_data field to struct bq24022_mach_info.
It also depends on the "add optional OTG transceiver and voltage
regulator support to pda_power" patch (queued for next in the power
supply tree) to enable charging when connected to the AC charger.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 08:24:38 +08:00
Linus Torvalds 811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Linus Torvalds 31e6e2dac5 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix build-breaking 7a192ec commit
  ARM: Add SMSC911X support to Overo platform (V2)
  arm: update omap_ldp defconfig to use smsc911x
  arm: update realview defconfigs to use smsc911x
  arm: update pcm037 defconfig to use smsc911x
  arm: convert omap ldp platform to use smsc911x
  arm: convert realview platform to use smsc911x
  arm: convert pcm037 platform to use smsc911x
  [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
  [ARM] 5442/1: pxa/cm-x255: fix reverse RDY gpios in PCMCIA driver
  [ARM] 5441/1: Use pr_err on error paths in at91 pm
  [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
  [ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
  [ARM] 5437/1: Add documentation for "nohlt" kernel parameter
  [ARM] 5436/1: ARM: OMAP: Fix compile for rx51
  [ARM] arch_reset() now takes a second parameter
  [ARM] Kirkwood: small L2 code cleanup
  [ARM] Kirkwood: invalidate L2 cache before enabling it
2009-04-03 09:05:40 -07:00
Robin Holt f5f7eac41d Allow rwlocks to re-enable interrupts
Pass the original flags to rwlock arch-code, so that it can re-enable
interrupts if implemented for that architecture.

Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs
which just do the same thing as non-flags variants.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:11 -07:00
Alexey Dobriyan 6f2c55b843 Simplify copy_thread()
First argument unused since 2.3.11.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:51 -07:00
Russell King cd02938a82 Merge branch 'smsc911x-armplatforms' of git://github.com/steveglen/linux-2.6 2009-04-02 23:22:11 +01:00
Steve Sakoman 172ef27544 ARM: Add SMSC911X support to Overo platform (V2)
Gumstix will soon be shipping a variant of their Summit board that
includes an SMSC LAN9221 ethernet interface.  This patch provides
support via the smsc911x driver when enabled in kernel config.

The Overo defconfig is not updated since the LAN9221 is an option
not present on all systems.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Steve Glendinning <steve.glendinning@smsc.com>
2009-04-02 18:32:28 +01:00
Stanley.Miao 162e8a415f arm: update omap_ldp defconfig to use smsc911x
Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2009-04-02 18:26:26 +01:00
Steve Glendinning f61eafb3a5 arm: update realview defconfigs to use smsc911x
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
2009-04-02 18:26:25 +01:00
Steve Glendinning 96b6938ad9 arm: update pcm037 defconfig to use smsc911x
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-02 18:26:24 +01:00
Steve Glendinning 1c0e147eb6 arm: convert omap ldp platform to use smsc911x
from 2.6.29, smc911x isn't maintained anymore. A new driver, smsc911x,
will replace it. so convert omap_ldp to use smsc911x driver.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
2009-04-02 18:26:17 +01:00
Steve Glendinning c5142e84f3 arm: convert realview platform to use smsc911x
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
2009-04-02 18:22:50 +01:00
Steve Glendinning 4353318ed5 arm: convert pcm037 platform to use smsc911x
Updated to also specify SMSC911X_FORCE_INTERNAL_PHY, as the external phy
detection hardware strap is incorrectly pulled high on this platform.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-02 18:21:15 +01:00
Santosh Shilimkar 9d681f3a1b [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
Set the "mult" to finite value in the local_timer_setup in case
of CONFIG_LOCAL_TIMERS not enabled. Othewise this throws warning
in the boot log because of detect zero event-device multiplicators.
This can cause division-by-zero crashes.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-02 15:53:17 +01:00
Ryan Mallon 7f96b1caac [ARM] 5441/1: Use pr_err on error paths in at91 pm
Change pr_debug to pr_err on error paths in the AT91 power management
code. All of the errors will result in the cpu not going into the
suspend state. This patch makes it possible to identify problems with
suspend when power management debugging is not enabled.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:18:19 +01:00
George G. Davis f2255be812 [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
We've observed that ARM VFP state can be corrupted during VFP exception
handling when PREEMPT is enabled.  The exact conditions are difficult
to reproduce but appear to occur during VFP exception handling when a
task causes a VFP exception which is handled via VFP_bounce and is then
preempted by yet another task which in turn causes yet another VFP
exception.  Since the VFP_bounce code is not preempt safe, VFP state then
becomes corrupt.  In order to prevent preemption from occuring while
handling a VFP exception, this patch disables preemption while handling
VFP exceptions.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:17:50 +01:00
Catalin Marinas fe68e68f6a [ARM] 5439/1: Do not clear bit 10 of DFSR during abort handling on ARMv6
Because of an ARM1136 erratum (326103), the current v6_early_abort
function needs to set the correct FSR[11] value which determines whether
the data abort was caused by a read or write. For legacy reasons (bit 10
not handled by software), bit 10 was also cleared masking out imprecise
aborts on ARMv6 CPUs. This patch removes the clearing of bit 10 of FSR.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:15:57 +01:00
Tony Lindgren ad19d8d90c [ARM] 5436/1: ARM: OMAP: Fix compile for rx51
This fixes a compile error caused by a mismerge while rebasing the patch:

linux-2.6/arch/arm/mach-omap2/board-rx51-peripherals.c:354:
undefined reference to `twl4030_mmc_init'

Looks like I need to also update my build scripts, just grepping for error:
in the logs is not obviously enough..

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:14:51 +01:00
Rusty Russell aa0d3bb77e arm: allow usage of string functions in linux/string.h
In introducing a trivial "strstarts()" function in linux/string.h, we
hit:

	arch/arm/boot/compressed/misc.o: In function `strstarts':
	misc.c:(.text+0x368): undefined reference to `strlen'
	misc.c:(.text+0x378): undefined reference to `strncmp'

This is because of "CFLAGS_misc.o := -Dstatic=" in the Makefile.
"static inline strstarts(...)" becomes non-inline, and refers to the
other string ops.

The simplest workaround is to include asm/string.h.  This makes sense
anyway, since lib/string.c won't be linked against this so we can't
use those functions anyway.

Compile tested here.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-31 13:05:36 +10:30
Sascha Hauer d42574d1d2 V4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:22 -03:00
Sascha Hauer d75b1dcc84 V4L/DVB (11031): pcm990 baseboard: add camera bus width switch setting
Some Phytec cameras have a I2C GPIO expander which allows it to
switch between different sensor bus widths. This was previously
handled in the camera driver. Since handling of this switch
varies on several boards the cameras are used on, the board
support seems a better place to handle the switch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:21 -03:00
Guennadi Liakhovetski 4f67130ad3 V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCs
Tested with 8 bit Bayer and 8 bit monochrome video.

 create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h
 create mode 100644 drivers/media/video/mx3_camera.c

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:53 -03:00
Matt LaPlante 692105b8ac trivial: fix typos/grammar errors in Kconfig texts
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:22:01 +02:00
Uwe Kleine-Koenig b8d99832a5 trivial: fix typo "virual" -> "virtual"
Signed-off-by: Uwe Kleine-Koenig <ukleinek@strlen.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:57 +02:00
Russell King 5c64e2abb3 Merge branch 'for-rmk' of git://git.marvell.com/orion 2009-03-30 10:40:54 +01:00
Russell King 8f6aef924d [ARM] arch_reset() now takes a second parameter
Add it to the new platforms.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-30 10:40:12 +01:00
Nicolas Pitre f000328ac1 [ARM] Kirkwood: small L2 code cleanup
Strictly speaking, a MCR instruction does not produce any output.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-28 22:39:30 -04:00
Maxime Bizon d75de08727 [ARM] Kirkwood: invalidate L2 cache before enabling it
I get random oopses on my Kirkwood board at startup when L2 cache is
enabled. FYI I'm using Marvell uboot version 3.4.16

Each boot produces the same oops, but anything that changes the kernel
size (even only changing initramfs) makes the oops different.

I noticed that nothing invalidates the L2 cache before enabling it,
doing so fixes my problem.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-28 22:39:30 -04:00
Linus Torvalds 0fe41b8982 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...
2009-03-28 14:03:14 -07:00
Russell King 9759d22c83 Merge branch 'master' into devel
Conflicts:
	arch/arm/include/asm/elf.h
	arch/arm/kernel/module.c
2009-03-28 20:30:18 +00:00
Russell King ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Mikael Pettersson f0bba9f934 [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
Compiling recent 2.6.29-rc kernels for ARM gives me the following warning:

arch/arm/mm/mmu.c: In function 'sanity_check_meminfo':
arch/arm/mm/mmu.c:697: warning: comparison between pointer and integer

This is because commit 3fd9825c42
"[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()"
in 2.6.29-rc5-git4 added a comparison of a pointer with PAGE_OFFSET,
which is an integer.

Fixed by casting PAGE_OFFSET to void *.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-28 20:21:20 +00:00
Tony Lindgren 9e495834e5 [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
OMAP34XX_MAILBOX_BASE must be defined both for 24xx and 34xx.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-28 19:35:02 +00:00
Russell King fd775c084e Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel 2009-03-28 14:18:11 +00:00
Russell King dc52b5bf2c Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-03-28 14:15:43 +00:00
Daniel Mack c9b78189f5 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
Reported-by: Matthias Meier <matthias.j.meier@gmx.net>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-28 19:23:05 +08:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Sascha Hauer ec62169903 i.MX21/27: remove ifdef CONFIG_FB_IMX
Compile in the framebuffer device unconditionally to fix pcm038
compilation without framebuffer support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:14 +01:00
Ilya Yanok 74bef9a4fa mxc: add arch_reset() function
This patch adds arch_reset() function for all mxc platforms.

It also removes (unsused) arch/arm/mach-mx2/system.c file.

This patch has been tested on i.MX1/27/31/35

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:14 +01:00
Sascha Hauer 05fd8e73e1 clkdev: add possibility to get a clock based on the device name
This adds clk_get_sys to get a clock without the associated struct
device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:13 +01:00
Sascha Hauer 0412d6c927 i.MX1: remove fb support from mach-imx
The lack of an include file currently breaks compilation of
mx1ads_defconfig. As framebuffer support is not actively used for
mach-imx and the whole architecture will be replaced by mach-mx1
soon, just remove fb support.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27 14:51:13 +01:00
Linus Torvalds ba1eb95cf3 Merge branch 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  x86: headers cleanup - setup.h
  emu101k1.h: fix duplicate include of <linux/types.h>
  compiler-gcc4: conditionalize #error on __KERNEL__
  remove __KERNEL_STRICT_NAMES
  make netfilter use strict integer types
  make drm headers use strict integer types
  make MTD headers use strict integer types
  make most exported headers use strict integer types
  make exported headers use strict posix types
  unconditionally include asm/types.h from linux/types.h
  make linux/types.h as assembly safe
  Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h
  headers_check fix cleanup: linux/reiserfs_fs.h
  headers_check fix cleanup: linux/nubus.h
  headers_check fix cleanup: linux/coda_psdev.h
  headers_check fix: x86, setup.h
  headers_check fix: x86, prctl.h
  headers_check fix: linux/reinserfs_fs.h
  headers_check fix: linux/socket.h
  headers_check fix: linux/nubus.h
  ...

Manually fix trivial conflicts in:
	include/linux/netfilter/xt_limit.h
	include/linux/netfilter/xt_statistic.h
2009-03-26 16:11:41 -07:00
Russell King 542f869f18 Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline into devel
Conflicts:
	arch/arm/mm/Kconfig

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-26 23:10:11 +00:00
Linus Torvalds a8416961d3 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  x86: disable __do_IRQ support
  sparseirq, powerpc/cell: fix unused variable warning in interrupt.c
  genirq: deprecate obsolete typedefs and defines
  genirq: deprecate __do_IRQ
  genirq: add doc to struct irqaction
  genirq: use kzalloc instead of explicit zero initialization
  genirq: make irqreturn_t an enum
  genirq: remove redundant if condition
  genirq: remove unused hw_irq_controller typedef
  irq: export remove_irq() and setup_irq() symbols
  irq: match remove_irq() args with setup_irq()
  irq: add remove_irq() for freeing of setup_irq() irqs
  genirq: assert that irq handlers are indeed running in hardirq context
  irq: name 'p' variables a bit better
  irq: further clean up the free_irq() code flow
  irq: refactor and clean up the free_irq() code flow
  irq: clean up manage.c
  irq: use GFP_KERNEL for action allocation in request_irq()
  kernel/irq: fix sparse warning: make symbol static
  irq: optimize init_kstat_irqs/init_copy_kstat_irqs
  ...
2009-03-26 16:06:50 -07:00
Linus Torvalds 13220a94d3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
  ixgbe: Allow Priority Flow Control settings to survive a device reset
  net: core: remove unneeded include in net/core/utils.c.
  e1000e: update version number
  e1000e: fix close interrupt race
  e1000e: fix loss of multicast packets
  e1000e: commonize tx cleanup routine to match e1000 & igb
  netfilter: fix nf_logger name in ebt_ulog.
  netfilter: fix warning in ebt_ulog init function.
  netfilter: fix warning about invalid const usage
  e1000: fix close race with interrupt
  e1000: cleanup clean_tx_irq routine so that it completely cleans ring
  e1000: fix tx hang detect logic and address dma mapping issues
  bridge: bad error handling when adding invalid ether address
  bonding: select current active slave when enslaving device for mode tlb and alb
  gianfar: reallocate skb when headroom is not enough for fcb
  Bump release date to 25Mar2009 and version to 0.22
  r6040: Fix second PHY address
  qeth: fix wait_event_timeout handling
  qeth: check for completion of a running recovery
  qeth: unregister MAC addresses during recovery.
  ...

Manually fixed up conflicts in:
	drivers/infiniband/hw/cxgb3/cxio_hal.h
	drivers/infiniband/hw/nes/nes_nic.c
2009-03-26 15:54:36 -07:00
Linus Torvalds 8690d8a9f6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] i6300esb.c: start locking
  [WATCHDOG] i6300esb.c: convert to platform device driver
  [WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501
  [WATCHDOG] Fix io.h & uaccess.h includes.
  [WATCHDOG] More coding-style and trivial clean-up
  [WATCHDOG] struct file_operations should be const
  [WATCHDOG] cpwd.c: Coding style - Clean-up
  [WATCHDOG] hpwdt.c: Add new HP BMC controller. 
  [PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
  [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
  [WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup
  [WATCHDOG] rc32434_wdt: add spin_locking
  [WATCHDOG] rc32434_wdt: add shutdown method
  [WATCHDOG] rc32434_wdt: add timeout module parameter
  [WATCHDOG] rc32434_wdt: clean-up driver
  [WATCHDOG] davinci: convert to ioremap() + io[read|write]
  [WATCHDOG] w83697ug: add error checking
  [WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl
2009-03-26 15:48:11 -07:00
Russell King e8b374bb6c Merge branch 'next-s3c64xx-regs' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:46:22 +00:00
Russell King f5f0e17a84 Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-03-26 22:44:43 +00:00
David S. Miller 08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Linus Torvalds 61a091827e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits)
  USB: qcserial: add device id for HP devices
  USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
  USB: allow malformed LANGID descriptors
  USB: pxa27x_udc: typo fixes and code cleanups
  USB: gadget: gadget zero uses new suspend/resume hooks
  USB: gadget: composite device-level suspend/resume hooks
  USB: r8a66597-hcd: suspend/resume support
  USB: more u32 conversion after transfer_buffer_length and actual_length
  USB: Fix cp2101 USB serial device driver termios functions for console use
  USB: CP2101 New Device ID
  USB: ipaq: handle 4 endpoint devices
  USB: S3C: Move usb-control.h to platform include
  USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
  USB: pedantic: spelling correction in comment for ch9.h
  USB: host: fix sparse warning: Using plain integer as NULL pointer
  USB: ohci-s3c2410: fix name of bus clock
  USB: ohci-s3c2410: remove <mach/hardware.h> include
  USB: serial: rename cp2101 driver to cp210x
  USB: CP2101 Reduce Error Logging
  USB: CP2101 Support AN205 baud rates
  ...
2009-03-26 11:17:39 -07:00
Ingo Molnar 5a54bd1307 Merge commit 'v2.6.29' into core/header-fixes 2009-03-26 18:29:40 +01:00
Eric Miao 707b2c247c [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
arch/arm/plat-pxa/mfp.c is not intended to be use by PXA25x/PXA27x,
make it explicit here only for use by PXA3xx or ARCH_MMP.

Reported-by: Guennadi Liakhovestski <g.liakhovestski@gmx.de>
Reported-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-26 21:30:11 +08:00
Paulius Zaleckas 839e642f3d Gemini: Add support for Teltonika RUT100
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-26 10:06:27 +02:00
Paulius Zaleckas 1df621ae2f Gemini: gpiolib based GPIO support v2
v2:
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-26 10:06:27 +02:00
Paulius Zaleckas 59d3a193f1 ARM: Add Gemini architecture v3
Adds support for Cortina Systems Gemini family CPUs:
http://www.cortina-systems.com/products/category/18

v3:
- fixed __io(a) to be defined as __typesafe_io(a)

v2:
- #include <asm/io.h> -> <linux/io.h>
- remove asm/system.h include
- revorked mm.c to use named initializers
- removed "empty" dma.h
- updated copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-26 10:06:08 +02:00
Tony Lindgren 2f3ec501ba [ARM] OMAP: Fix compile for omap2_init_common_hw()
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 19:51:46 +00:00
Russell King 8937b7349c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2009-03-25 18:31:35 +00:00
Paulius Zaleckas 28853ac8fe ARM: Add support for FA526 v2
Adds support for Faraday FA526 core. This core is used at least by:
Cortina Systems Gemini and Centroid family
Cavium Networks ECONA family
Grain Media GM8120
Pixelplus ImageARM
Prolific PL-1029
Faraday IP evaluation boards

v2:
- move TLB_BTB to separate patch
- update copyrights

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 13:10:01 +02:00
Russell King 997302259f [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:21:35 +00:00
Russell King e63cedb656 [ARM] collie: fix two minor formatting nits
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:15:00 +00:00
Dmitry Baryshkov 17a92a788e [ARM] 5431/1: scoop: completely drop old-style SCOOP GPIO accessors
Now, as all places that use Scoop GPIO have been converted to use
GPIO API, drop old-style accessors completely.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:13:57 +00:00
Dmitry Baryshkov 8cb52f788c [ARM] 5430/1: collie_pm: use new GPIO API to control charger
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:13:57 +00:00
Dmitry Baryshkov 224be092d1 [ARM] 5429/1: collie: start scoop converton to new api
Start converting scoop gpio access to new API instead of old
deprecated one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25 10:13:56 +00:00
Russell King cf281a99b6 Merge git://git.marvell.com/orion into devel 2009-03-25 10:00:08 +00:00
Thomas Reitmayr 9e058d4f57 [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".

Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-03-25 09:02:50 +00:00
Paulius Zaleckas bba7d0b9ba ARM: tlbflush.h: introduce TLB_BTB flag
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25 10:58:47 +02:00
Ben Dooks 49121aa14c USB: S3C: Move usb-control.h to platform include
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX
architectures, so move it to <plat/usb-control.h>

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:20:45 -07:00
Alan Cox 803c78e4da [ARM] twl4030 - leak fix
Trivial error path leak fix. Problem found by Daniel Marjamäki using
cppcheck

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-24 22:52:28 +00:00
Alan Cox b23c7a427e [ARM] fix leak in iop13xx/pci
Another leak found by Daniel Marjamäki

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-24 22:52:27 +00:00
Russell King fbf2b1f9cf Merge branch 'highmem' into devel 2009-03-24 22:47:45 +00:00
root 9a38e989b8 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-03-24 22:04:25 +00:00
Lauri Leukkunen ffe7f95bb1 ARM OMAP3: Initial support for Nokia RX-51, v3
Adds board files and related headers for Nokia RX-51
Internet Tablet.

This patch has been updated with some clean-up patches
posted earlier to linux-omap list.

Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 20:52:48 -07:00
Syed Mohammed Khasim 6fdc29e262 ARM: OMAP3: Add support for 3430 SDP, v4
Add support for 3430 SDP.

Various updates have been merged into this patch from
the linux-omap list.

Patch updated to initialize regulators by David Brownell
<dbrownell@users.sourceforge.net>.

Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 20:52:47 -07:00
Steve Sakoman c6a81316c7 ARM: OMAP3: Add ADS7846 touchscreen support to Overo platform, v3
An upcoming Overo expansion board includes an ADS7846 touchscreen controller.

This patch adds support via the ads7846 driver when enabled in the
kernel config.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:24 -07:00
Felipe Balbi 18cb7aca6f ARM: OMAP3: MUSB initialization for omap hw, v2
Create a generic board-file for initializing usb
on omap2430 and omap3 boards.

Patch modified by Tony to build the module based on
CONFIG_USB_MUSB_SOC. Also merged in a patch adding
the nop xceiv from Ajay Kumar Gupta <ajay.gupta@ti.com>.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:24 -07:00
Tony Lindgren 828c707e6d ARM: OMAP3: Add base address definitions and resources for OMAP 3 IS, v2
This replaces earlier patch from Sergio Aguirre titled "[REVIEW PATCH 03/14]
OMAP34XX: CAM: Resources fixes".

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:23 -07:00
Adrian Hunter e51151a53f ARM: OMAP3: mmc-twl4030 allow arbitrary slot names, v3
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:23 -07:00
Adrian Hunter 8d75e98b58 ARM: OMAP3: mmc-twl4030 add cover switch
Allow a cover switch to be used to cause a rescan of the
MMC slot.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:23 -07:00
David Brownell 034ae7b417 ARM: OMAP3: mmc-twl4030 fix for vmmc = 0
Resolve longstanding issue noted by Adrian Hunter:  confusion
between settting VSEL=0 (which is 1.8V on MMC1) and poweroff.

Also, leave VSEL alone if we're just powering the regulator off.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:23 -07:00
Grazvydas Ignotas 07d83cc9c8 ARM: OMAP3: mmc-twl4030 add MMC3 support, v2
Device connected to MMC3 is assumed to be self-powered, so
set_power() function is empty. It can't be omited because
host driver requires it.

Array size for hsmmc[] is specified to allocate to allocate
an instance for the third MMC controller.

Also fix a leak which happens if invalid controller id
is passed.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:23 -07:00
David Brownell 01971f65ff ARM: OMAP3: mmc-twl4030 init passes device nodes back, v2
When setting up HSMMC devices, pass the device nodes back so
board code can linking them to their power supply regulators.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:22 -07:00
David Brownell 0329c3773e ARM: OMAP3: mmc-twl4030 voltage cleanup
Correct twl4030 MMC power switching:  fix voltage ranges reported
for each slot, and handle them fully.

 Lies corrected:
  - MMC-1 doesn't support the 2.6-2.7 Volt range
  - MMC-2 can't normally support anything except 1.8V
 Omissions corrected
  - MMC-1 *does* handle the 2.8-2.9 Volt range
  - MMC-2 can handle 2.5-3.2 Volt cards, given a transceiver

Add transciever support for MMC-2; enable it for Overo and Pandora.
(Depends on something else to have set up pinmuxing for control
signals instead of as MMC2_DAT4..7 pins.)

Also shrink twl4030_hsmmc_info a smidgeon ... padding is all gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:22 -07:00
Adrian Hunter 8466032d86 ARM: OMAP3: mmc-twl4030 fix name buffer length, v2
Add 1 to buffer length for null terminator and use snprintf.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:22 -07:00
Tony Lindgren b9d766c767 ARM: OMAP3: Add more GPIO mux options
This patch adds several new GPIO pins and updates
the pin naming comments.

The patch is based on earlier patches on linux-omap
list by Manikandan Pillai <mani.pillai@ti.com>,
Vaibhav Hiremath <hvaibhav@ti.com> and
David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:21 -07:00
Jarkko Nikula 2bb6c8026c ARM: OMAP3: Remove unused CONFIG_I2C2_OMAP_BEAGLE
There is no CONFIG_I2C2_OMAP_BEAGLE in mainline and it is under
removal in linux-omap also so remove this dead code now.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:21 -07:00
Felipe Balbi b0b5aa3f4c ARM: OMAP: get rid of OMAP_TAG_USB, v2
OMAP_TAGS should vanish soon since they're not generic arm tags.
Most of them can be converted to a platform_data or parsed
from a command line like e.g. serial tag.

For OMAP_TAG_USB we just let boards call omap_usb_init()
passing a pointer to omap_usb_config.

Patch updated by Tony for mainline, basically make
n770 and h4 compile. Also folded in a fix for OSK
by David Brownell <dbrownell@users.sourceforge.net>.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Santosh Shilimkar 52176e7083 ARM: OMAP: Dispatch only relevant DMA interrupts
This fixes the spurious interrupt issue on a DMA channel.

In OMAP sDMA, contrast to the SDMA.DMA4_CSRi registers, the
SDMA.DMA4_IRQSTATUS_Lj registers are updated regardless of
the corresponding bits in the SDMA.DMA4_IRQENABLE_Lj registers.
Since there are four sDMA interrupt lines and if more than one
line is actively used by two concurrently running sDMA softwares
modules,then the spurious interrupt can be observed on the other
lines.

Fix in this patch will only dispatch the relevant and enabled
interrupts on a particular line thus perevting spurious IRQ.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Santosh Shilimkar 2263f0222e ARM: OMAP: Get available DMA channels from cmdline
This patch set up a cmdline option for omap dma for masking the
available channels. It is needed since the OMAP DMA is a system wide
resource and can be used by another software apart from the kernel.

To reserve the omap SDMA channels for kernel dma usage, use cmdline
bootarg "omap_dma_reserve_ch=". The valid range is 1 to 32.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Jarkko Nikula 7954763bb9 ARM: OMAP: Add method to register additional I2C busses on the command line, v2
This patch extends command line option "i2c_bus=bus_id,clkrate" so that
it allow to register additional I2C busses that are not registered with
omap_register_i2c_bus from board initialization code.

Purpose of this is to register additional board busses which are routed
to external connectors only without any on board I2C devices.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Jarkko Nikula 3a853fb933 ARM: OMAP: Add command line option for I2C bus speed, v2
This patch adds a new command line option "i2c_bus=bus_id,clkrate" into
I2C bus registration helper. Purpose of the option is to override the
default board specific bus speed which is supplied by the
omap_register_i2c_bus.

The default bus speed is typically set to speed of slowest I2C chip on the
bus and overriding allow to use some experimental configurations or updated
chip versions without any kernel modifications.

Cc: linux-i2c@vger.kernel.org
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:20 -07:00
Jarkko Nikula d4c58bf45a ARM: OMAP: Add documentation for function omap_register_i2c_bus
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:19 -07:00
Timo Kokkonen 6c366e3299 ARM: OMAP: Export dmtimer functions
Make the dmtimer function symbols available so modules can take use of
them.

Signed-off-by: Timo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:19 -07:00
Zebediah C. McClure ed98178319 [OMAP850] Build system changes
Build system changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:19 -07:00
Zebediah C. McClure 59185eeeaa [OMAP850] IRQ related changes
IRQ related changes.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:19 -07:00
Zebediah C. McClure 557096fe28 [OMAP850] Changes to memory subsystem
Changes to memory subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:51:19 -07:00
Zebediah C. McClure 56739a6929 [OMAP850] Changes to base IO subsystem, v2
Changes to base IO subsystem.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:40 -07:00
Zebediah C. McClure ae302f4006 [OMAP850] Add base support for omap850 cpu
Add base support for omap850 cpu.

Signed-off-by: Zebediah C. McClure <zmc@lurian.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:39 -07:00
Tony Lindgren 6b0147cda6 ARM: OMAP: Remove remaining board-*.h includes from hardware.h
Also remove board-omap3beagle.h that is not included anywhere,
and move protoype for voiceblue_reset() from board-voiceblue.h
to system.h.

After this patch there are still board-ams-delta.h, board-sx1.h
and board-voiceblue.h that export some functions. These could
be removed if the functions were moved under drivers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:39 -07:00
Tony Lindgren d40cdf080d ARM: OMAP: No need to include board-nokia.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:38 -07:00
Tony Lindgren 0d4d9ab08a ARM: OMAP: No need to include board-overo.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:38 -07:00
Tony Lindgren ec7558a62d ARM: OMAP: No need to include board-ldp.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP34XX_ETHR_START to LDP_ETHR_START.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:37 -07:00
Tony Lindgren 40662d7731 ARM: OMAP: No need to include board-h4.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:36 -07:00
Tony Lindgren 7055477558 ARM: OMAP: No need to include board-apollon.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:35 -07:00
Tony Lindgren a362fdbddb ARM: OMAP: No need to include board-omap2430sdp.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header file. Also rename
SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:35 -07:00
Tony Lindgren b2830810fd ARM: OMAP: No need to include board-palm*.h from hardware.h
Move the defines to the associated board file and remove
the now unnecessary header files.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:35 -07:00
Tony Lindgren 3a0110cdae ARM: OMAP: No need to include board-osk.h from hardware.h
Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:34 -07:00
Tony Lindgren 278267be38 ARM: OMAP: No need to include board-innovator.h from hardware.h
Move the defines to the board file and remove the now unnecessary
header file.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:34 -07:00
Tony Lindgren 228fe42e5e ARM: OMAP: No need to include board-h3.h from hardware.h
Also move board-h3.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:33 -07:00
Tony Lindgren eb6b0b1832 ARM: OMAP: No need to include board-h2.h from hardware.h
Also move board-h2.h to mach-omap1.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:33 -07:00
Tony Lindgren d9558b19f2 ARM: OMAP: No need to include board-perseus2.h or board-fsample.h from hardware.h
Move defines to the board file and remove the now
unnecessary headers.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-03-23 18:07:32 -07:00
Hiroshi DOYU 8dff0fa55d omap mailbox: remove unnecessary header file inclusion
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:32 -07:00
Hiroshi DOYU 7a781afde6 omap mailbox: convert sequence bit checking to module paramter
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:31 -07:00
Hiroshi DOYU 9ae0ee0076 omap mailbox: move mailbox.h into mailbox.c
no need to keep mailbox.h separately.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:26 -07:00
Hiroshi DOYU c75ee7520b omap mailbox: add save_/restore_ctx() for PM
To preserve the registers during off-mode

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:26 -07:00
Hiroshi DOYU da8cfe03a4 omap mailbox: fix empty struct device for omap2
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:25 -07:00
Hiroshi DOYU f98d67a07e omap mailbox: fix empty struct device for omap1
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:25 -07:00
Hiroshi DOYU f48cca8770 omap mailbox: fix empty struct device for omap_mbox
Since "mbox->dev" doesn't exist and isn't created either at
registration, this patch will create "struct device", which belongs to
"omap-mailbox" class and set this pointer for the member of
"struct omap_mbox".

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:24 -07:00
Hiroshi DOYU 94fc58c6da omap mailbox: print hardware revision at startup
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:24 -07:00
Hiroshi DOYU 6c20a68372 omap mailbox: add initial omap3 support
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:23 -07:00
Hiroshi DOYU 733ecc5c06 omap mailbox: cleanup omap2 register definition with macro
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-03-23 18:07:23 -07:00
Takashi Iwai b5c784894c Merge branch 'topic/asoc' into for-linus 2009-03-24 00:35:53 +01:00
Alexander Clouter 0c1355e36f [ARM] orion5x: update of FPGA ID's for the TS-78xx
Received official word finally from Technological Systems on which
FPGA ID's they have released unto the world.  Also an additional of
a dummy entry matching the FPGA ID of the Verilog template on our
wiki.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 17:05:14 -04:00
Martin Michlmayr 586dcf279b [ARM] Kirkwood: Add support for QNAP TS-119/TS-219 Turbo NAS
Add support for the QNAP TS-119 and TS-219 Turbo NAS devices.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 16:12:38 -04:00
Nicolas Pitre 99b36e68d3 [ARM] update mach-types
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 16:12:37 -04:00
Martin Michlmayr a441891f9d [ARM] Kirkwood: More consistency regarding MPP naming
With the exception of UART0, all MPP names are uppercase.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 14:45:24 -04:00
Martin Michlmayr 6574e001b4 [ARM] Kirkwood: Hook up I2C
Hook up I2C on Marvell Kirkwood.  Tested on a QNAP TS-219 which has
RTC connected through I2C.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-23 14:42:00 -04:00
Russell King dc85ce155b Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-03-23 16:42:30 +00:00
Eric Miao 5a09f8916c [ARM] pxa: add defconfig for pxa910-based platforms
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:39 +08:00
Eric Miao e78b4eccb7 [ARM] pxa: add defconfig for pxa168-based platforms
Instead of having various pieces of defconfig files for different
platforms, let's group them into a single one.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:38 +08:00
Eric Miao 01215e35c2 [ARM] pxa: add base support for pxa910-based TTC_DKB
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:38 +08:00
Eric Miao a3929f31cb [ARM] pxa: add base support for pxa910-based TavorEVB
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:38 +08:00
Eric Miao 14c6b5e7ad [ARM] pxa: add base support for Marvell PXA910
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:35 +08:00
Eric Miao a6b993c6b5 [ARM] pxa/aspenite: add support for debug ethernet
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:35 +08:00
Eric Miao 9c291f0f83 [ARM] pxa/aspenite: add support for console uart
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:35 +08:00
Eric Miao a7a89d9621 [ARM] pxa: add MFP support for pxa168
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00
Eric Miao e2bb6650ef [ARM] pxa: add GPIO support for pxa168
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00
Eric Miao 40305a583a [ARM] pxa: add iWMMXt support for pxa168
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00