Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Maxim Levitsky 9bf70717a5 mtd: r852: remove useless pci powerup/down from suspend/resume routines
It turns out that pci core now handles these, so this code is redundant
and can even cause bugs

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-25 01:32:21 +01:00
Kulikov Vasiliy 029919c1ed mtd: r852: remove casts from void
Remove unnesessary casts from void*.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02 09:06:03 +01:00
Kulikov Vasiliy d5af6dcffa mtd: r852: remove casts from void
Remove unnesessary casts from void*.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02 09:05:26 +01:00
Maxim Levitsky ac373f7e22 mtd/r852: update card detect early.
This turns out to be the reason for DMA timeouts on resume,
if card was inserted while system was suspended

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02 15:35:31 +01:00
Maxim Levitsky 9489be8ca2 mtd/r852: Fixes in case of DMA timeout
* Don't call complete on dma completion
* do a INIT_COMPLETE before using it each time
* Report DMA read error via ecc 'correct'

I finally managed to make my system do suspend to ram propertly, and I see that
if card was inserted during suspend (while system was off), I get dma timeouts
on resume. Simple card reinsert solves the issue.
This patch solves a crash that would happen otherwise

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02 14:53:40 +01:00
Maxim Levitsky cc1fed00c9 mtd/r852: register IRQ as last step
Otherwise, if it fires right away, it might access
uninitialized spinlock

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02 14:53:16 +01:00
Tejun Heo 05d71b4625 mtd: update gfp/slab.h includes
Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-19 17:21:52 +01:00
Maxim Levitsky c3611570dd mtd: sm_common: split smartmedia and xD table
2GB xD card, and 4MB SmartMedia ROM card share same ID, so to make both work
split xD and smartmedia ID tables.

Hardware driver must be able to know which type it handles (and probably just one).

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-14 01:03:46 +01:00
David Woodhouse 0c82d3ce2f mtd/nand/r852: Use pci_dma_mapping_error()
... instead of comparing with DMA_ERROR_CODE, which will only work on
powerpc/sparc/x86.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-11 09:25:18 -08:00
Randy Dunlap f696aa43fa mtd/nand/r852: fix build for CONFIG_PCI disabled
r852 fails to build when CONFIG_PCI is not enabled since it uses
pci_*() calls and is a PCI driver, so it should depend on PCI
to prevent build errors.
It should also #include <linux/pci.h>.

drivers/mtd/nand/r852.c:1053: error: implicit declaration of function 'pci_prepare_to_sleep'
drivers/mtd/nand/r852.c:1062: error: implicit declaration of function 'pci_back_from_sleep'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-11 09:19:12 -08:00
Stephen Rothwell ada4965788 mtd: nand: r852: fix name space clash
and include delay.h for msleep().

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08 18:33:19 -08:00
Randy Dunlap b2aaf7a2b4 mtd/nand/r852: fix build for CONFIG_PM=n
Fix r852 build for the case of CONFIG_PM=n.

drivers/mtd/nand/r852.c:1039: error: implicit declaration of function 'pci_prepare_to_sleep'
drivers/mtd/nand/r852.c:1048: error: implicit declaration of function 'pci_back_from_sleep'

This patch leaves r852_pm_ops untouched.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08 18:32:05 -08:00
Maxim Levitsky fb45d3232c mtd: r852: Few fixes for problems that occur when card is rapidly inserted/removed.
First don't enable card detection logic to early. Second be very careful with
DMA engine, to be sure it doesn't write to kernel memory driver doesn't own.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-03-08 18:31:18 -08:00
Maxim Levitsky d4080cb32e mtd: r852 fix pci ID
The PCI_DEVICE_ID_RICOH_R5C852 was missed in the edited commit, and on 
second thought I just open code it.

This fixes compile error.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26 21:29:35 +00:00
Maxim Levitsky 133fa8c7d7 mtd: Few follow up cleanups for Smartmedia/xD support
* Test results of few functions that were declared with __must_check
* Fix bogus gcc warning about uinitialized variable 'ret'
* Remove unused variable from mtdblock_remove_dev
* Don't use deprecated DMA_32BIT_MASK

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26 20:13:49 +00:00
Maxim Levitsky 67e054e919 mtd: nand: Add driver for Ricoh xD/SmartMedia reader
This adds a driver for Ricoh R5C852 xD card reader.

This reader is a part of larger mulifunction chip
and found at least in R5C832

Driver is complete, but bewere of the fact that some
(probably only type M) xD cards are 'fake' which means that
they have an on board CPU and expose emulated nand command set

These cards don't even store the  oob area on the flash,
but generate it on the fly from something else.

Thus they demand to have proper values written in the oob area,
and therefore only useful with SmartMedia FTL.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26 19:22:38 +00:00