During block reservation if we don't have enough blocks left, retry
block reservation with smaller block counts. This makes sure we try
fallocate and DIO with smaller request size and don't fail early. The
delayed allocation reservation cannot try with smaller block count. So
retry block reservation to handle temporary disk full conditions. Also
print free blocks details if we fail block allocation during writepages.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With delayed allocation we need to make sure block are reserved before
we attempt to allocate them. Otherwise we get block allocation failure
(ENOSPC) during writepages which cannot be handled. This would mean
silent data loss (We do a printk stating data will be lost). This patch
updates the DIO and fallocate code path to do block reservation before
block allocation. This is needed to make sure parallel DIO and fallocate
request doesn't take block out of delayed reserve space.
When free blocks count go below a threshold we switch to a slow patch
which looks at other CPU's accumulated percpu counter values.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For small file block allocations, mballoc uses per cpu prealloc
space. Use goal block when searching for the right prealloc
space. Also make sure ext4_da_writepages tries to write
all the pages for small files in single attempt
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, the locality group prealloc list is freed only when there
is a block allocation failure. This can result in large number of
entries in the preallocation list making ext4_mb_use_preallocated()
expensive.
To fix this, we convert the locality group prealloc list to a hash
list. The hash index is the order of number of blocks in the prealloc
space with a max order of 9. When adding prealloc space to the list we
make sure total entries for each order does not exceed 8. If it is
more than 8 we discard few entries and make sure the we have only <= 5
entries.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
NR_CPUS can be really large. We should be using nr_cpu_ids instead.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Don't call BUG_ON on file system failures. Instead use ext4_error and
also handle the continue case properly.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I noticed when filling a 1T filesystem with 4 threads using the
fs_mark benchmark:
fs_mark -d /mnt/test -D 256 -n 100000 -t 4 -s 20480 -F -S 0
that I occasionally got checksum mismatch errors:
EXT4-fs error (device sdb): ext4_init_inode_bitmap: Checksum bad for group 6935
etc. I'd reliably get 4-5 of them during the run.
It appears that the problem is likely a race to init the bg's
when the uninit_bg feature is enabled.
With the patch below, which adds sb_bgl_locking around initialization,
I was able to complete several runs with no errors or warnings.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch does block reservation for delayed
allocation, to avoid ENOSPC later at page flush time.
Blocks(data and metadata) are reserved at da_write_begin()
time, the freeblocks counter is updated by then, and the number of
reserved blocks is store in per inode counter.
At the writepage time, the unused reserved meta blocks are returned
back. At unlink/truncate time, reserved blocks are properly released.
Updated fix from Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
to fix the oldallocator block reservation accounting with delalloc, added
lock to guard the counters and also fix the reservation for meta blocks.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Update group infos when updating a group's descriptor.
Add group infos when adding a group's descriptor.
Refresh cache pages used by mb_alloc when changes occur.
This will probably need modifications when META_BG resizing will be allowed.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
mballoc allocation missed check for blocks reserved for root users. Add
ext4_has_free_blocks() check before allocation. Also modified
ext4_has_free_blocks() to support multiple block allocation request.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move the code related to block allocation to a single function and add helper
funtions to differient allocation for data and meta data blocks
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Quota allocation is not removed when ext4_mb_new_blocks calls
kmem_cache_alloc failed. Also make sure the allocation context is freed
on the error path.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch mostly controls the way inode are allocated in order to
make ialloc aware of flex_bg block group grouping. It achieves this
by bypassing the Orlov allocator when block group meta-data are packed
toghether through mke2fs. Since the impact on the block allocator is
minimal, this patch should have little or no effect on other block
allocation algorithms. By controlling the inode allocation, it can
basically control where the initial search for new block begins and
thus indirectly manipulate the block allocator.
This allocator favors data and meta-data locality so the disk will
gradually be filled from block group zero upward. This helps improve
performance by reducing seek time. Since the group of inode tables
within one flex_bg are treated as one giant inode table, uninitialized
block groups would not need to partially initialize as many inode
table as with Orlov which would help fsck time as the filesystem usage
goes up.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The error processing of the return value of mb_free_blocks is meanless
because it only returns 0. This fix includes
- make mb_free_blocks return void
- remove the error processing part in callers
- unlock group before calling ext4_error in mb_free_blocks
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When the directory fs/ext4 is not correctly created under proc, the entry
under this directory should not be created.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since this a non-static function, make it be ext4 specific to avoid
conflicts with potentially other filesystems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_mb_seq_history_open(): check if sbi->s_mb_history is NULL
ext4_mb_history_init(): replace kmalloc and memset with kzalloc
ext4_mb_init_backend(): remove memset since kzalloc is used
ext4_mb_init(): the return value of ext4_mb_init_backend is int,
but i is unsigned, replace it with a new int variable.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_mb_init_cache() incorrectly always return EIO on success. This
causes the caller of ext4_mb_init_cache() fail when it checks the return
value.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With mballoc we search for the best extent using different
criteria. We should always use the goal group when we are
starting with a new criteria.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Some architectures implement ext4_find_next_bit and
ext4_find_next_zero_bit in such a way that they return
greater than max for some input values. Make sure
mb_find_next_bit and mb_find_next_zero_bit return the
right values.
On 2.6.25 we have include/asm-x86/bitops_32.h
static inline unsigned find_first_bit(const unsigned long *addr, unsigned size)
{
unsigned x = 0;
while (x < size) {
unsigned long val = *addr++;
if (val)
return __ffs(val) + x;
x += (sizeof(*addr)<<3);
}
return x;
}
This can return value greater than size.
Reported and fixed here for lustre
https://bugzilla.lustre.org/show_bug.cgi?id=15932https://bugzilla.lustre.org/attachment.cgi?id=17205
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix use of uninitialized data with debug enabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the block allocator gets blocks out of system zone ext4 calls
ext4_error. But if the file system is mounted with errors=continue
retry block allocation. We need to mark the system zone blocks as
in use to make sure retry don't pick them again
System zone is the block range mapping block bitmap, inode bitmap and inode
table.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In case of inode preallocation, the number of blocks to allocate depends
on the file size and it is calculated in ext4_mb_normalize_request().
Each group in the filesystem is then checked to find one that can be
used for allocation; this is done in ext4_mb_good_group().
When a file bigger than 4MB is created, the requested number of blocks
to preallocate, calculated by ext4_mb_normalize_request is 4096.
However for a filesystem with 1KB block size, the maximum size of the
block buddies used by the multiblock allocator is 2048, so none of
groups in the filesystem satisfies the search criteria in
ext4_mb_good_group(). Scanning all the filesystem groups impacts
performance.
This was demonstrated by using a freshly created, 70GB, 1k block
filesystem, with caches dropped write before the test via
/proc/sys/vm/drop_caches, and with the filesystem mounted with
nodelalloc and nodealloc,nomballoc. The time to write an 8 megabyte
file using "dd if=/dev/zero of=/mnt/test/fo bs=8k count=1k conv=fsync"
took 35.5091 seconds (236kB/s) with nodellaloc, and 0.233754 seconds
(35.9 MB/s) with the nodelloc,nomballoc options. With a 1TB partition,
it took several minutes to write 8MB!
This patch modifies the algorithm in ext4_mb_normalize_group_request to
calculate the number of blocks to allocate by taking into account the
maximum size of free blocks chunks handled by the multiblock allocator.
It has also been tested for filesystems with 2KB and 4KB block sizes to
ensure that those cases don't regress.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
bdevname() fills the buffer that it is given as a parameter, so calling
strcpy() or snprintf() on the returned value is redundant (and probably not
guaranteed to work - I don't think strcpy and snprintf support overlapping
buffers.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ext4_mb_init_backend() 'i' is of type ext4_group_t. Since unsigned, i
>= 0 is always true, so fix hot spins after err_freebuddy: and -meta:
and prevent decrements when zero.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move function and structure definiations out of mballoc.c and put it under
a new header file mballoc.h
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch allows compiling mballoc with:
#define AGGRESSIVE_CHECK
#define DOUBLE_CHECK
#define MB_DEBUG
It fixes:
Compilation errors:
fs/ext4/mballoc.c: In function '__mb_check_buddy':
fs/ext4/mballoc.c:605: error: 'struct ext4_prealloc_space' has no member named 'group_list'
fs/ext4/mballoc.c:606: error: 'struct ext4_prealloc_space' has no member named 'pstart'
fs/ext4/mballoc.c:608: error: 'struct ext4_prealloc_space' has no member named 'len'
Compilation warnings:
fs/ext4/mballoc.c: In function 'ext4_mb_normalize_group_request':
fs/ext4/mballoc.c:2863: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'
fs/ext4/mballoc.c: In function 'ext4_mb_use_inode_pa':
fs/ext4/mballoc.c:3103: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'
Sparse check:
fs/ext4/mballoc.c:3818:2: warning: context imbalance in 'ext4_mb_show_ac' - different lock contexts for basic block
Signed-off-by: Solofo Ramangalahy <Solofo.Ramangalahy@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Move ext4 headers out of include/linux. This is just the trivial move,
there's some more thing that could be done later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function prototype of ext4_new_blocks_old() is defined in ext4_fs.h,
so we don't need the extra function prototype in mballoc.c
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The list_for_each_entry_rcu() primitive should be used instead of
list_for_each_rcu(), as the former is easier to use and provides
better type safety.
http://groups.google.com/group/linux.kernel/browse_thread/thread/45749c83451cebeb/0633a65759ce7713?lnk=raot
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
mballoc.c is a whole lot of static functions, which gcc seems to
really like to inline.
With the changes below, on x86, I can at least get from:
432 ext4_mb_new_blocks
240 ext4_mb_free_blocks
208 ext4_mb_discard_group_preallocations
188 ext4_mb_seq_groups_show
164 ext4_mb_init_cache
152 ext4_mb_release_inode_pa
136 ext4_mb_seq_history_show
...
to
220 ext4_mb_free_blocks
188 ext4_mb_seq_groups_show
176 ext4_mb_regular_allocator
164 ext4_mb_init_cache
156 ext4_mb_new_blocks
152 ext4_mb_release_inode_pa
136 ext4_mb_seq_history_show
124 ext4_mb_release_group_pa
...
which still has some big functions in there, but not 432 bytes!
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use creation by full path instead: "fs/foo".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext4_find_next_zero_bit and ext4_find_next_bit needs a long aligned
address on x8_64. Add mb_find_next_zero_bit and mb_find_next_bit
and use them in the mballoc.
Fix: https://bugzilla.redhat.com/show_bug.cgi?id=433286
Eric Sandeen debugged the problem and suggested the fix.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In ext4_mb_complex_scan_group, if the extent length of the newly
found extentet is greater than than the total free blocks counted
in group info, break without claiming the block.
Document different ext4_error usage, explaining the state with which we
continue if we mount with errors=continue
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With the flex_bg feature enabled, a large file creation oopses the
kernel. The BUG_ON is:
BUG_ON(len >= EXT4_BLOCKS_PER_GROUP(sb));
As the allocation of the bitmaps and the inode table can be done
outside the block group with flex_bg, this allows to allocate up to
EXT4_BLOCKS_PER_GROUP blocks in a group.
This patch fixes the oops.
Signed-off-by: Valerie Clement <valerie.clement@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Multiblock allocator calls BUG_ON in many case if the free and used
blocks count obtained looking at the bitmap is different from what
the allocator internally accounted for. Use ext4_error in such case
and don't panic the system.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
struct ext4_allocation_context is rather large, and this bloats
the stack of many functions which use it. Allocating it from
a named slab cache will alleviate this.
For example, with this change (on top of the noinline patch sent earlier):
-ext4_mb_new_blocks 200
+ext4_mb_new_blocks 40
-ext4_mb_free_blocks 344
+ext4_mb_free_blocks 168
-ext4_mb_release_inode_pa 216
+ext4_mb_release_inode_pa 40
-ext4_mb_release_group_pa 192
+ext4_mb_release_group_pa 24
Most of these stack-allocated structs are actually used only for
mballoc history; and in those cases often a smaller struct would do.
So changing that may be another way around it, at least for those
functions, if preferred. For now, in those cases where the ac
is only for history, an allocation failure simply skips the history
recording, and does not cause any other failures.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Repoted by Adrian Bunk <bunk@kernel.org>:
The Coverity checker spotted the following NULL dereference:
static int ext4_mb_mark_diskspace_used
{
...
if (!bitmap_bh)
goto out_err;
...
out_err:
sb->s_dirt = 1;
put_bh(bitmap_bh);
...
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Aneesh Kumar K.V
Theodore Ts'o
Eric Sandeen
Mingming Cao
Frederic Bohe
Shen Feng
Jose R. Santos
Alexey Dobriyan
Valerie Clement
Jean Delvare
Roel Kluin
Solofo Ramangalahy
Christoph Hellwig
Harvey Harrison
Marcin Slusarz
Denis V. Lunev
Alex Tomas