Граф коммитов

250 Коммитов

Автор SHA1 Сообщение Дата
Michal Hocko 7b506b1035 jbd2: get rid of open coded allocation retry loop
insert_revoke_hash does an open coded endless allocation loop if
journal_oom_retry is true. It doesn't implement any allocation fallback
strategy between the retries, though. The memory allocator doesn't know
about the never fail requirement so it cannot potentially help to move
on with the allocation (e.g. use memory reserves).

Get rid of the retry loop and use __GFP_NOFAIL instead. We will lose the
debugging message but I am not sure it is anyhow helpful.

Do the same for journal_alloc_journal_head which is doing a similar
thing.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-15 15:45:58 -04:00
Joseph Qi 6f6a6fda29 jbd2: fix ocfs2 corrupt when updating journal superblock fails
If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case.  In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts.  So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first.  And only after recovering
journal it can do the new updates.

The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841

[ Fixed bug in patch which allowed a non-negative error return from
  jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
  was causing xfstests ext4/306 to fail. -- Ted ]

Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: stable@vger.kernel.org
2015-06-15 14:36:01 -04:00
Jan Kara de92c8caf1 jbd2: speedup jbd2_journal_get_[write|undo]_access()
jbd2_journal_get_write_access() and jbd2_journal_get_create_access() are
frequently called for buffers that are already part of the running
transaction - most frequently it is the case for bitmaps, inode table
blocks, and superblock. Since in such cases we have nothing to do, it is
unfortunate we still grab reference to journal head, lock the bh, lock
bh_state only to find out there's nothing to do.

Improving this is a bit subtle though since until we find out journal
head is attached to the running transaction, it can disappear from under
us because checkpointing / commit decided it's no longer needed. We deal
with this by protecting journal_head slab with RCU. We still have to be
careful about journal head being freed & reallocated within slab and
about exposing journal head in consistent state (in particular
b_modified and b_frozen_data must be in correct state before we allow
user to touch the buffer).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-08 12:46:37 -04:00
Michal Hocko 6ccaf3e2f3 jbd2: revert must-not-fail allocation loops back to GFP_NOFAIL
This basically reverts 47def82672 (jbd2: Remove __GFP_NOFAIL from jbd2
layer). The deprecation of __GFP_NOFAIL was a bad choice because it led
to open coding the endless loop around the allocator rather than
removing the dependency on the non failing allocation. So the
deprecation was a clear failure and the reality tells us that
__GFP_NOFAIL is not even close to go away.

It is still true that __GFP_NOFAIL allocations are generally discouraged
and new uses should be evaluated and an alternative (pre-allocations or
reservations) should be considered but it doesn't make any sense to lie
the allocator about the requirements. Allocator can take steps to help
making a progress if it knows the requirements.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: David Rientjes <rientjes@google.com>
2015-06-08 10:53:10 -04:00
Linus Torvalds 9bfccec24e Lots of bugs fixes, including Zheng and Jan's extent status shrinker
fixes, which should improve CPU utilization and potential soft lockups
 under heavy memory pressure, and Eric Whitney's bigalloc fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUiRUwAAoJENNvdpvBGATwltQP/3sjHtFw+RUvKgQ8vX9M2THk
 4b9j0ja0mrD3ObTXUxdDuOh1q09MsfSUiOYK6KZOav3nO/dRODqZnWgXz/zJt3LC
 R97s4velgzZi3F2ijnLiCo5RVZahN9xs8bUHZ85orMIr5wogwGdaUpnoqZSg0Ehr
 PIFnTNORyNXBwEm3XPjUmENTdyq9FZ8DsS6ACFzgFi79QTSyJFEM4LAl2XaqwMGV
 fVhNwnOGIyT8lHZAtDcobkaC86NjakmpW2Ip3p9/UEQtynh16UeVXKEO3K7CcQ+L
 YJRDNnSIlGpR1OJp+v6QJPUd8q4fc/8JW9AxxsLak0eqkszuB+MxoQXOCFV5AWaf
 jrs4TV3y0hCuB4OwuYUpnfcU1o+O7p39MqXMv8SA1ZBPbijN/LQSMErFtXj2oih6
 3gJHUWLwELGeR+d9JlI29zxhOeOIotX255UBgj2oasQ0X3BW3qAgQ4LmP3QY90Pm
 BUmxiMoIWB9N3kU4XQGf+Kyy8JeMLJj0frHDxI3XLz+B+IlWCCkBH6y3AD/a13kS
 HHMMLOwHGEs0lYEKsm89dkcij5GuKd8eKT8Q0+CvKD9Z6HPdYvQxoazmF87Q6j/7
 ZmshaVxtWaLpNbDaXVg+IgZifJAN0+mVzVHRhY9TSjx8k9qLdSgSEqYWjkSjx9Ij
 nNB2zVrHZDMvZ7MCZy85
 =ZrTc
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Lots of bugs fixes, including Zheng and Jan's extent status shrinker
  fixes, which should improve CPU utilization and potential soft lockups
  under heavy memory pressure, and Eric Whitney's bigalloc fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
  ext4: ext4_da_convert_inline_data_to_extent drop locked page after error
  ext4: fix suboptimal seek_{data,hole} extents traversial
  ext4: ext4_inline_data_fiemap should respect callers argument
  ext4: prevent fsreentrance deadlock for inline_data
  ext4: forbid journal_async_commit in data=ordered mode
  jbd2: remove unnecessary NULL check before iput()
  ext4: Remove an unnecessary check for NULL before iput()
  ext4: remove unneeded code in ext4_unlink
  ext4: don't count external journal blocks as overhead
  ext4: remove never taken branch from ext4_ext_shift_path_extents()
  ext4: create nojournal_checksum mount option
  ext4: update comments regarding ext4_delete_inode()
  ext4: cleanup GFP flags inside resize path
  ext4: introduce aging to extent status tree
  ext4: cleanup flag definitions for extent status tree
  ext4: limit number of scanned extents in status tree shrinker
  ext4: move handling of list of shrinkable inodes into extent status code
  ext4: change LRU to round-robin in extent status tree shrinker
  ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
  ext4: fix block reservation for bigalloc filesystems
  ...
2014-12-12 09:28:03 -08:00
Darrick J. Wong 32f3869184 jbd2: fix regression where we fail to initialize checksum seed when loading
When we're enabling journal features, we cannot use the predicate
jbd2_journal_has_csum_v2or3() because we haven't yet set the sb
feature flag fields!  Moreover, we just finished loading the shash
driver, so the test is unnecessary; calculate the seed always.

Without this patch, we fail to initialize the checksum seed the first
time we turn on journal_checksum, which means that all journal blocks
written during that first mount are corrupt.  Transactions written
after the second mount will be fine, since the feature flag will be
set in the journal superblock.  xfstests generic/{034,321,322} are the
regression tests.

(This is important for 3.18.)

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM>
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-12-01 21:57:06 -05:00
Theodore Ts'o d9f39d1e44 jbd2: remove unnecessary NULL check before iput()
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 20:02:37 -05:00
Darrick J. Wong feb8c6d3dd jbd2: fix journal checksum feature flag handling
Clear all three journal checksum feature flags before turning on
whichever journal checksum options we want.  Rearrange the error
checking so that newer flags get complained about first.

Reported-by: TR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-11 11:38:21 -04:00
Gioh Kim a49058fab2 jbd/jbd2: use non-movable memory for the jbd superblock
Sicne the jbd/jbd2 superblock is not released until the file system is
unmounted, allocate the buffer cache from the non-moveable area to
allow page migration and CMA allocations to more easily succeed.

Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2014-09-04 22:36:35 -04:00
Darrick J. Wong db9ee22036 jbd2: fix descriptor block size handling errors with journal_csum
It turns out that there are some serious problems with the on-disk
format of journal checksum v2.  The foremost is that the function to
calculate descriptor tag size returns sizes that are too big.  This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags.

Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.

Add a few function helpers so we don't have to open-code quite so
many pieces.

Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: TR Reardon <thomas_reardon@hotmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2014-08-28 22:22:29 -04:00
Theodore Ts'o 3469a32a1e jbd2: don't hold j_state_lock while calling wake_up()
The j_state_lock is one of the hottest locks in the jbd2 layer and
thus one of its scalability bottlenecks.

We don't need to be holding the j_state_lock while we are calling
wake_up(&journal->j_wait_commit), so release the lock a little bit
earlier.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-08 19:11:36 -05:00
Rashika Kheria 7747e6d028 jbd2: mark file-local functions as static
Mark functions as static in jbd2/journal.c because they are not used
outside this file.

This eliminates the following warning in jbd2/journal.c:
fs/jbd2/journal.c:125:5: warning: no previous prototype for ‘jbd2_verify_csum_type’ [-Wmissing-prototypes]
fs/jbd2/journal.c:146:5: warning: no previous prototype for ‘jbd2_superblock_csum_verify’ [-Wmissing-prototypes]
fs/jbd2/journal.c:154:6: warning: no previous prototype for ‘jbd2_superblock_csum_set’ [-Wmissing-prototypes]

Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
2014-02-17 20:49:04 -05:00
Dmitry Monakhov a67c848a8b jbd2: rename obsoleted msg JBD->JBD2
Rename performed via: perl -pi -e 's/JBD:/JBD2:/g' fs/jbd2/*.c

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2013-12-08 21:14:59 -05:00
Jan Kara 75685071cd jbd2: revise KERN_EMERG error messages
Some of KERN_EMERG printk messages do not really deserve this log
level and the one in log_wait_commit() is even rather useless (the
journal has been previously aborted and *that* is where we should have
been complaining). So make some messages just KERN_ERR and remove the
useless message.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-12-08 21:13:59 -05:00
Darrick J. Wong 18a6ea1e5c jbd2: Fix endian mixing problems in the checksumming code
In the jbd2 checksumming code, explicitly declare separate variables with
endianness information so that we don't get confused and screw things up again.
Also fixes sparse warnings.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-08-28 14:59:58 -04:00
Theodore Ts'o fe52d17cdd jbd2: move superblock checksum calculation to jbd2_write_superblock()
Some of the functions which modify the jbd2 superblock were not
updating the checksum before calling jbd2_write_superblock().  Move
the call to jbd2_superblock_csum_set() to jbd2_write_superblock(), so
that the checksum is calculated consistently.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: stable@vger.kernel.org
2013-07-01 08:12:38 -04:00
Paul Gortmaker 169f1a2a87 jbd2: use a single printk for jbd_debug()
Since the jbd_debug() is implemented with two separate printk()
calls, it can lead to corrupted and misleading debug output like
the following (see lines marked with "*"):

[  290.339362] (fs/jbd2/journal.c, 203): kjournald2: kjournald2 wakes
[  290.339365] (fs/jbd2/journal.c, 155): kjournald2: commit_sequence=42103, commit_request=42104
[  290.339369] (fs/jbd2/journal.c, 158): kjournald2: OK, requests differ
[* 290.339376] (fs/jbd2/journal.c, 648): jbd2_log_wait_commit:
[* 290.339379] (fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: want 42104, j_commit_sequence=42103
[* 290.339382] JBD2: starting commit of transaction 42104
[  290.339410] (fs/jbd2/revoke.c, 566): jbd2_journal_write_revoke_records: Wrote 0 revoke records
[  290.376555] (fs/jbd2/commit.c, 1088): jbd2_journal_commit_transaction: JBD2: commit 42104 complete, head 42079

i.e. the debug output from log_wait_commit and journal_commit_transaction
have become interleaved.  The output should have been:

(fs/jbd2/journal.c, 648): jbd2_log_wait_commit: JBD2: want 42104, j_commit_sequence=42103
(fs/jbd2/commit.c, 370): jbd2_journal_commit_transaction: JBD2: starting commit of transaction 42104

It is expected that this is not easy to replicate -- I was only able
to cause it on preempt-rt kernels, and even then only under heavy
I/O load.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Suggested-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-12 23:04:04 -04:00
Dmitry Monakhov 9ff8644624 jbd2: optimize jbd2_journal_force_commit
Current implementation of jbd2_journal_force_commit() is suboptimal because
result in empty and useless commits. But callers just want to force and wait
any unfinished commits. We already have jbd2_journal_force_commit_nested()
which does exactly what we want, except we are guaranteed that we do not hold
journal transaction open.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-12 22:24:07 -04:00
Jan Kara 8f7d89f368 jbd2: transaction reservation support
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues.  It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing.  Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:35:11 -04:00
Jan Kara f29fad7210 jbd2: remove unused waitqueues
j_wait_logspace and j_wait_checkpoint are unused.  Remove them.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:24:11 -04:00
Jan Kara 76c3990456 jbd2: cleanup needed free block estimates when starting a transaction
__jbd2_log_space_left() and jbd_space_needed() were kind of odd.
jbd_space_needed() accounted also credits needed for currently
committing transaction while it didn't account for credits needed for
control blocks.  __jbd2_log_space_left() then accounted for control
blocks as a fraction of free space.  Since results of these two
functions are always only compared against each other, this works
correct but is somewhat strange.  Move the estimates so that
jbd_space_needed() returns number of blocks needed for a transaction
including control blocks and __jbd2_log_space_left() returns free
space in the journal (with the committing transaction already
subtracted).  Rename functions to jbd2_log_space_left() and
jbd2_space_needed() while we are changing them.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:12:57 -04:00
Jan Kara b34090e5e2 jbd2: refine waiting for shadow buffers
Currently when we add a buffer to a transaction, we wait until the
buffer is removed from BJ_Shadow list (so that we prevent any changes
to the buffer that is just written to the journal).  This can take
unnecessarily long as a lot happens between the time the buffer is
submitted to the journal and the time when we remove the buffer from
BJ_Shadow list.  (e.g.  We wait for all data buffers in the
transaction, we issue a cache flush, etc.)  Also this creates a
dependency of do_get_write_access() on transaction commit (namely
waiting for data IO to complete) which we want to avoid when
implementing transaction reservation.

So we modify commit code to set new BH_Shadow flag when temporary
shadowing buffer is created and we clear that flag once IO on that
buffer is complete.  This allows do_get_write_access() to wait only
for BH_Shadow bit and thus removes the dependency on data IO
completion.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:08:56 -04:00
Jan Kara e5a120aeb5 jbd2: remove journal_head from descriptor buffers
Similarly as for metadata buffers, also log descriptor buffers don't
really need the journal head. So strip it and remove BJ_LogCtl list.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:06:01 -04:00
Jan Kara f5113effc2 jbd2: don't create journal_head for temporary journal buffers
When writing metadata to the journal, we create temporary buffer heads
for that task.  We also attach journal heads to these buffer heads but
the only purpose of the journal heads is to keep buffers linked in
transaction's BJ_IO list.  We remove the need for journal heads by
reusing buffer_head's b_assoc_buffers list for that purpose.  Also
since BJ_IO list is just a temporary list for transaction commit, we
use a private list in jbd2_journal_commit_transaction() for that thus
removing BJ_IO list from transaction completely.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 12:01:45 -04:00
Zheng Liu 5d9cf9c625 jbd2: use kmem_cache_zalloc for allocating journal head
This commit tries to use kmem_cache_zalloc instead of kmem_cache_alloc/
memset when a new journal head is alloctated.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
2013-05-28 07:27:11 -04:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds 149b306089 Mostly performance and bug fixes, plus some cleanups. The one new
feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
 allows installation of a hidden inode designed for boot loaders.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJRfpDwAAoJENNvdpvBGATwsjwP/17V3AN6XTEhZK80p3/qN5YD
 N2QIHeyYIqCGpczLs2TQEkxWX6nqpDggAPXY956wvgeEMQV+pQ+DLO4Ol9+p5WD2
 hrklleYhtOjFQ3Xh4lqrEi5FzKVzWagVDLqgUjALJ+D+hkDB7ZQT/fm2sH45rzot
 xBp3aVqANU8GqAAbEW4/Ng9ZGMx0dpANiU2svbjM71sv2dCLFmWAkz+GgZsMbuJZ
 vnKIZP6I6plwP3LuZzEbVCA7F2PzC4ywEOJKjIEvgHpX6uMDR3FX8pD5Dlo/o6e2
 eP+KLnD43mJMxBmTn22x5Sm0N6DUzJCEELRJWB9wCZoLdEvbEWRxT3qsPXfLWelG
 2jj4bImXF2CqYEsJww5FV2WdXXdnuM57pZym5vMZGAFyKPSCJobA4Y3XRdXkBfXf
 Gq/cFoPYv2EcBIhz3zrRj+tbY8esbO9wOnF6+x+AF10BspD2V7nuoVdWVhOf0A3v
 i9ifGPwLk3e3xHr9oXheo7IWn52oviZeyD77d7D7MLhgn+xU4LaVhW3R63Q+mI4D
 0TXG25R1CVcE7wyFy3gqSVXSCDO0JcQBL5LgcL+wAGXcHPAXqBpN2DFTPo+9fJH2
 g3YMwr+wMbci1XRVQ2vdTt/nBZYjOCh6PgRmg3KjTz11Ra5EsjQvYjKWYwqf2RGn
 QhCgbzd/qtZfNJztLvr7
 =GCT2
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Mostly performance and bug fixes, plus some cleanups.  The one new
  feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
  allows installation of a hidden inode designed for boot loaders."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4: fix type-widening bug in inode table readahead code
  ext4: add check for inodes_count overflow in new resize ioctl
  ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
  ext4: fix online resizing for ext3-compat file systems
  jbd2: trace when lock_buffer in do_get_write_access takes a long time
  ext4: mark metadata blocks using bh flags
  buffer: add BH_Prio and BH_Meta flags
  ext4: mark all metadata I/O with REQ_META
  ext4: fix readdir error in case inline_data+^dir_index.
  ext4: fix readdir error in the case of inline_data+dir_index
  jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  ext4: mext_insert_extents should update extent block checksum
  ext4: move quota initialization out of inode allocation transaction
  ext4: reserve xattr index for Rich ACL support
  jbd2: reduce journal_head size
  ext4: clear buffer_uninit flag when submitting IO
  ext4: use io_end for multiple bios
  ext4: make ext4_bio_write_page() use BH_Async_Write flags
  ext4: Use kstrtoul() instead of parse_strtoul()
  ext4: defragmentation code cleanup
  ...
2013-05-01 08:04:12 -07:00
majianpeng e76004093d fs/buffer.c: remove unnecessary init operation after allocating buffer_head.
bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:39 -07:00
Al Viro d9dda78bad procfs: new helper - PDE_DATA(inode)
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:32 -04:00
Theodore Ts'o d76a3a7711 ext4/jbd2: don't wait (forever) for stale tid caused by wraparound
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
2013-04-03 22:02:52 -04:00
Theodore Ts'o b6e96d0067 jbd2: use module parameters instead of debugfs for jbd_debug
There are multiple reasons to move away from debugfs.  First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the jbd2 module.

Secondly, as a module paramter it can be specified as a boot option if
jbd2 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/jbd2/parameters/jbd2_debug.  So it is more flexible.

Ultimately we want to move away from using jbd_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-09 16:29:20 -05:00
Theodore Ts'o 9fff24aa2c jbd2: track request delay statistics
Track the delay between when we first request that the commit begin
and when it actually begins, so we can see how much of a gap exists.
In theory, this should just be the remaining scheduling quantuum of
the thread which requested the commit (assuming it was not a
synchronous operation which triggered the commit request) plus
scheduling overhead; however, it's possible that real time processes
might get in the way of letting the kjournald thread from executing.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-06 22:30:23 -05:00
Eric Sandeen e7b04ac00e jbd2: don't wake kjournald unnecessarily
Don't send an extra wakeup to kjournald in the case where we
already have the proper target in j_commit_request, i.e. that
transaction has already been requested for commit.

commit deeeaf13 "jbd2: fix fsync() tid wraparound bug" changed
the logic leading to a wakeup, but it caused some extra wakeups
which were found to lead to a measurable performance regression.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[tytso@mit.edu: reworked check to make it clearer]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-01-30 00:39:28 -05:00
Eric Sandeen 37be2f59d3 ext4: remove ext4_handle_release_buffer()
ext4_handle_release_buffer() was intended to remove journal
write access from a buffer, but it doesn't actually do anything
at all other than add a BUFFER_TRACE point, but it's not reliably
used for that either.  Remove all the associated dead code.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2012-11-08 11:22:46 -05:00
Linus Torvalds 6432f21284 The big new feature added this time is supporting online resizing
using the meta_bg feature.  This allows us to resize file systems
 which are greater than 16TB.  In addition, the speed of online
 resizing has been improved in general.
 
 We also fix a number of races, some of which could lead to deadlocks,
 in ext4's Asynchronous I/O and online defrag support, thanks to good
 work by Dmitry Monakhov.
 
 There are also a large number of more minor bug fixes and cleanups
 from a number of other ext4 contributors, quite of few of which have
 submitted fixes for the first time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQbxMXAAoJENNvdpvBGATwlg4QAJZ4mHNSL2eaaxjRtTbL1pAz
 +FVXpJ3lhw1lSfE9hJGqPVE8EfU2fWjIqxEI7dgh95Tukc5pUnPAQ2/hBz8ZA0qq
 o0AFMk3mRnvCEh6HsZfumsV83eqpR3k/zEy4uFH+KtxBskPe2sEKy3B7qOxvgdKW
 Gh8B2WqF2BpIj9WIT1P9G6xsxZW64EMHTbWcgRhuoRD7bakDNnwQ3kElz/TJQU5q
 bM/5wE7pqKwU2J1L0Ho0mxDi0f/BbXeJdA9k1tQy2KM1pZwHtpj4Ls0qmfoi49GE
 KyZqQOXlFbAz/9tidPDceY5KoRRQm1MwZ+1MimQX1P+40cs/w3pNu3yiibcaXIru
 UZ63AQMCj5JHMcFNVi20sVCwjU/ibNtEO75cfDD4bzPgHJvfCj73EbHTLl21nbTu
 izIMffhJEHmRnmRXiiortYVuI4b19oIfnXg7eclrJoUWSuGwKKsJOc5nMjDqidG4
 B7Gq4TD89sGkIYzx+50E+ll2ispcBN0BQnGqp4k2BzgDyEHhuFYk7VuVQvJgCGTi
 eobzQJj7JUXPWxyemcAVkQTtUq4vVbkm/IwS+/GA9b9Z80X8hR8x6EVHUW5lX3qC
 YHoBSCU4XKZXXWqzx0fIVCXyKKFiBzM+OXcgHOKH90vK8k6kPmPODhNCxvV3pITU
 jfl9q+X1dY4SpybZjLt5
 =iYeV
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "The big new feature added this time is supporting online resizing
  using the meta_bg feature.  This allows us to resize file systems
  which are greater than 16TB.  In addition, the speed of online
  resizing has been improved in general.

  We also fix a number of races, some of which could lead to deadlocks,
  in ext4's Asynchronous I/O and online defrag support, thanks to good
  work by Dmitry Monakhov.

  There are also a large number of more minor bug fixes and cleanups
  from a number of other ext4 contributors, quite of few of which have
  submitted fixes for the first time."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
  ext4: fix ext4_flush_completed_IO wait semantics
  ext4: fix mtime update in nodelalloc mode
  ext4: fix ext_remove_space for punch_hole case
  ext4: punch_hole should wait for DIO writers
  ext4: serialize truncate with owerwrite DIO workers
  ext4: endless truncate due to nonlocked dio readers
  ext4: serialize unlocked dio reads with truncate
  ext4: serialize dio nonlocked reads with defrag workers
  ext4: completed_io locking cleanup
  ext4: fix unwritten counter leakage
  ext4: give i_aiodio_unwritten a more appropriate name
  ext4: ext4_inode_info diet
  ext4: convert to use leXX_add_cpu()
  ext4: ext4_bread usage audit
  fs: reserve fallocate flag codepoint
  ext4: remove redundant offset check in mext_check_arguments()
  ext4: don't clear orphan list on ro mount with errors
  jbd2: fix assertion failure in commit code due to lacking transaction credits
  ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
  ext4: enable FITRIM ioctl on bigalloc file system
  ...
2012-10-08 06:36:39 +09:00
Eric Sandeen eeecef0af5 jbd2: don't write superblock when if its empty
This sequence:

# truncate --size=1g fsfile
# mkfs.ext4 -F fsfile
# mount -o loop,ro fsfile /mnt
# umount /mnt
# dmesg | tail

results in an IO error when unmounting the RO filesystem:

[  318.020828] Buffer I/O error on device loop1, logical block 196608
[  318.027024] lost page write due to I/O error on loop1
[  318.032088] JBD2: Error -5 detected when updating journal superblock for loop1-8.

This was a regression introduced by commit 24bcc89c7e7c: "jbd2: split
updating of journal superblock and marking journal empty".

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2012-08-18 22:29:40 -04:00
Linus Torvalds ef824bfba2 The following are all bug fixes and regressions. The most notable are
the ones which cause problems for ext4 on RAID --- a performance
 problem when mounting very large filesystems, and a kernel OOPS when
 doing an rm -rf on large directory hierarchies on fast devices.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABCAAGBQJQLlVSAAoJENNvdpvBGATwhOYQAKx22YF9+SHnnVv2GtCQrsE6
 N3acE/FoDYiO1/LRa5M6NDO3ZIL4Vqi6409LYFQky/SQL8ziM5CBeLOBD9qPTE1L
 AGrzWn4vzZcjEf90ZEBN99fS5Uj1A9Axz2denxy7Hfb2HcSXfcuuVQXpdS42cFo8
 gwtlX4jxmPkbjRlAdeqYVBNuWpTZ0a+UyLc4A6v3aLcbzPSJvPYmI7mKCksiSySU
 yt0atjMDb56blAQJ2TITdAZN6rQShNzyok2pPfxaLusl5g0Gtjq8sSEPof1PQ1zq
 gDFc+kpZvUyPdwQzV3IL8+TodFFZ0x/2OhqoYCTKajROLHGjQFsdkb8EJbnNeDff
 EDxIjeVJR0kzSuSNWu+n5028lmEd9Sk7Ykr37cHeUxG8/0SADUqSDQYNhvbOPQsj
 iq5dwF79tKjuMqjJrABuWA1ZNgHBISXgyBmHLXgEk3LrgucT9UIg8Zlkhq480SYO
 JXhmkO2Ka4UwkVUShoWgRtEzRgUxhINBShs6g67zwm6slS4s2CWHnqhUn6EQe6+r
 DY/hoUA8KbdG3Cf5iJBFM2kUO68CDIXeJjocA7JvlouRgQSxmkOceIuk7DusAitM
 nHJKAtSNgC/z7yMoNi7YN0S5YYcCebmO1MEPzYSpPH07YwLJVNmh9Fk6BIfb7vi3
 vJSQMBrgGrbaXrnhBA7z
 =Zulv
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Ted Ts'o:
 "The following are all bug fixes and regressions.  The most notable are
  the ones which cause problems for ext4 on RAID --- a performance
  problem when mounting very large filesystems, and a kernel OOPS when
  doing an rm -rf on large directory hierarchies on fast devices."

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix kernel BUG on large-scale rm -rf commands
  ext4: fix long mount times on very big file systems
  ext4: don't call ext4_error while block group is locked
  ext4: avoid kmemcheck complaint from reading uninitialized memory
  ext4: make sure the journal sb is written in ext4_clear_journal_err()
2012-08-17 08:04:47 -07:00
Theodore Ts'o d796c52ef0 ext4: make sure the journal sb is written in ext4_clear_journal_err()
After we transfer set the EXT4_ERROR_FS bit in the file system
superblock, it's not enough to call jbd2_journal_clear_err() to clear
the error indication from journal superblock --- we need to call
jbd2_journal_update_sb_errno() as well.  Otherwise, when the root file
system is mounted read-only, the journal is replayed, and the error
indicator is transferred to the superblock --- but the s_errno field
in the jbd2 superblock is left set (since although we cleared it in
memory, we never flushed it out to disk).

This can end up confusing e2fsck.  We should make e2fsck more robust
in this case, but the kernel shouldn't be leaving things in this
confused state, either.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2012-08-05 19:04:57 -04:00
Artem Bityutskiy 12810ad708 jbd/jbd2: nuke write_super from comments
The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various jbd and jbd2.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-08-04 12:15:36 +04:00
Darrick J. Wong c390087591 jbd2: checksum data blocks that are stored in the journal
Calculate and verify checksums of each data block being stored in the journal.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-27 08:12:12 -04:00
Darrick J. Wong 4fd5ea43bc jbd2: checksum journal superblock
Calculate and verify a checksum covering the journal superblock.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-27 08:08:22 -04:00
Darrick J. Wong 01b5adcebb jbd2: Grab a reference to the crc32c driver if necessary
Obtain a reference to the crc32c driver if needed for the v2 checksum.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-27 07:50:56 -04:00
Darrick J. Wong 25ed6e8a54 jbd2: enable journal clients to enable v2 checksumming
Add in the necessary code so that journal clients can enable the new
journal checksumming features.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-05-27 07:48:56 -04:00
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Linus Torvalds 69e1aaddd6 Ext4 commits for 3.3 merge window; mostly cleanups and bug fixes
The changes to export dirty_writeback_interval are from Artem's s_dirt
 cleanup patch series.  The same is true of the change to remove the
 s_dirt helper functions which never got used by anyone in-tree.  I've
 run these changes by Al Viro, and am carrying them so that Artem can
 more easily fix up the rest of the file systems during the next merge
 window.  (Originally we had hopped to remove the use of s_dirt from
 ext4 during this merge window, but his patches had some bugs, so I
 ultimately ended dropping them from the ext4 tree.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABCAAGBQJPb39rAAoJENNvdpvBGATwVz8P/3V1NqSsk20VJOLbmEE45GxL
 GDzQJ6OsFG0UiQk6ISSrSdwxfav/KTCGySsU9UtAoOdPcBwnnsf8S7wc6OggwwuC
 hBFGwwFzk6YSQaZ58sUxWRGeOJuP/FPem6Id6buC4DQ1KIcznP/hEEgEnh/ir4Ec
 vrsfexY93TR8BE2Mi23v2epDVLU0B6bY/w9nDqbTXif3xN/gh/ypoHHouuM6Bs2n
 TyWHOwD15NwfnvRHd8PfDDqQM/D29x3QI0FMrWj9McpwIz4d4cBfhN4LQ/G+yLDY
 izv5DM10GbinwHPrsOTGVAW3KIdSS9rP3jCJGVuOrJZ9ufGXosvHuIYVhI7J3SBK
 JhBu6QEsN1IsvlVYpz9q8mqVKaDXQLsz2eaTw+i4yfmyOk1kOX7nIEOxYFF78G+V
 Of/W1SpIpJQaXvLHRcDj9fDj0fZTciUZA8v7/HOFS+co2dzIl0iZbcfBFp0/56RY
 sWdQoeRlx1ciVDPR+w2TQO5w3VWQw1gT5aqux0NiPj0XFoiUHScxgNGAYbqENMQw
 v9chvyDMlorqj0rF/Vey5SssgEDi7MTdYuYTi4YyMqr7pcvOJaO85pf+wH9g2eKW
 XhW33PhPGuwCJDP5Pg8Y0Z2Hp/Q3DCqhLqhGfTyAs/NG9+hR4wgp3VWb8CUqhA1t
 C/yzNeOYqScAefCzQx2V
 =+9zk
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates for 3.4 from Ted Ts'o:
 "Ext4 commits for 3.3 merge window; mostly cleanups and bug fixes

  The changes to export dirty_writeback_interval are from Artem's s_dirt
  cleanup patch series.  The same is true of the change to remove the
  s_dirt helper functions which never got used by anyone in-tree.  I've
  run these changes by Al Viro, and am carrying them so that Artem can
  more easily fix up the rest of the file systems during the next merge
  window.  (Originally we had hopped to remove the use of s_dirt from
  ext4 during this merge window, but his patches had some bugs, so I
  ultimately ended dropping them from the ext4 tree.)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (66 commits)
  vfs: remove unused superblock helpers
  mm: export dirty_writeback_interval
  ext4: remove useless s_dirt assignment
  ext4: write superblock only once on unmount
  ext4: do not mark superblock as dirty unnecessarily
  ext4: correct ext4_punch_hole return codes
  ext4: remove restrictive checks for EOFBLOCKS_FL
  ext4: always set then trimmed blocks count into len
  ext4: fix trimmed block count accunting
  ext4: fix start and len arguments handling in ext4_trim_fs()
  ext4: update s_free_{inodes,blocks}_count during online resize
  ext4: change some printk() calls to use ext4_msg() instead
  ext4: avoid output message interleaving in ext4_error_<foo>()
  ext4: remove trailing newlines from ext4_msg() and ext4_error() messages
  ext4: add no_printk argument validation, fix fallout
  ext4: remove redundant "EXT4-fs: " from uses of ext4_msg
  ext4: give more helpful error message in ext4_ext_rm_leaf()
  ext4: remove unused code from ext4_ext_map_blocks()
  ext4: rewrite punch hole to use ext4_ext_remove_space()
  jbd2: cleanup journal tail after transaction commit
  ...
2012-03-28 10:02:55 -07:00
Linus Torvalds c7c66c0cb0 Power management updates for 3.4
Assorted extensions and fixes including:
 
 * Introduction of early/late suspend/hibernation device callbacks.
 * Generic PM domains extensions and fixes.
 * devfreq updates from Axel Lin and MyungJoo Ham.
 * Device PM QoS updates.
 * Fixes of concurrency problems with wakeup sources.
 * System suspend and hibernation fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZww5AAoJEKhOf7ml8uNsiBYQAL9YGso7KypZhLspNxvAKuZr
 iHyme2F7OdOiUfo40DVH5tRuEsQvLOl0S+9ukWLrzQotKBsMfym05jtbGN9m6Ygh
 Z793sx3eRI3mltekJ9yrOxH6BOBDMWMkwY8ztU/X5aYDNirgJ/qtAjSK4BvWXBrz
 APeaUReVnLdaNP8SnhHfne/KPsHk++NKZvAAva7E6RwtZn4KV6bfiBPGb8yvY8pP
 m4cg1S5QEduMy+zQJ8+IlEHR91bt9spUyRwbhw6ZHCNzNeu4iEZT8DVt1O1sIRbO
 LsNcClqsd40nr781SoF8N9GmGUxlUDr46bS3FSsDkYzn8uyxGEsv00edJZtPwIm5
 7nPuYat3Ke1YsON0Kcd/wkBGXqw/Rjfp3F1bnHjpVx/0oM/6MPrFNnIwvpHspejG
 kN3770idYJ17dLckhcsbYsLdy8yirITILDzvHT0AAaZ9z4Lr9Pm56WwFZLyb/lhR
 2cqK8Bb8W9YvcVsKV8YqkyBVrygWMe+c56KoAoUBiSNxvW6LphmXFBj5QiFMs8s8
 Xh8H7xU96FKbpNMIAZ1+bpI4zgulQG4xPXI9pKbhMfjaMUgj2zQeO8/t0WlB1M0z
 +kEUcYHJnXrRrObQuHEFXZdIjy/E0fdUboMIrlLt0gm97OxnG6imPseQp6/leQkC
 t+L4Aq6TOUofUU86d4cI
 =IGhc
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates for 3.4 from Rafael Wysocki:
 "Assorted extensions and fixes including:

  * Introduction of early/late suspend/hibernation device callbacks.
  * Generic PM domains extensions and fixes.
  * devfreq updates from Axel Lin and MyungJoo Ham.
  * Device PM QoS updates.
  * Fixes of concurrency problems with wakeup sources.
  * System suspend and hibernation fixes."

* tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits)
  PM / Domains: Check domain status during hibernation restore of devices
  PM / devfreq: add relation of recommended frequency.
  PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()
  PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()
  PM / shmobile: Make TMU driver use pm_genpd_dev_always_on()
  PM / Domains: Introduce "always on" device flag
  PM / Domains: Fix hibernation restore of devices, v2
  PM / Domains: Fix handling of wakeup devices during system resume
  sh_mmcif / PM: Use PM QoS latency constraint
  tmio_mmc / PM: Use PM QoS latency constraint
  PM / QoS: Make it possible to expose PM QoS latency constraints
  PM / Sleep: JBD and JBD2 missing set_freezable()
  PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case
  PM / Freezer: Remove references to TIF_FREEZE in comments
  PM / Sleep: Add more wakeup source initialization routines
  PM / Hibernate: Enable usermodehelpers in hibernate() error path
  PM / Sleep: Make __pm_stay_awake() delete wakeup source timers
  PM / Sleep: Fix race conditions related to wakeup source timer function
  PM / Sleep: Fix possible infinite loop during wakeup source destruction
  PM / Hibernate: print physical addresses consistently with other parts of kernel
  ...
2012-03-21 10:15:51 -07:00
Cong Wang 303a8f2afc jbd2: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:23 +08:00
Jan Kara 3339578f05 jbd2: cleanup journal tail after transaction commit
Normally, we have to issue a cache flush before we can update journal tail in
journal superblock, effectively wiping out old transactions from the journal.
So use the fact that during transaction commit we issue cache flush anyway and
opportunistically push journal tail as far as we can. Since update of journal
superblock is still costly (we have to use WRITE_FUA), we update log tail only
if we can free significant amount of space.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-13 22:45:38 -04:00
Jan Kara 79feb521a4 jbd2: issue cache flush after checkpointing even with internal journal
When we reach jbd2_cleanup_journal_tail(), there is no guarantee that
checkpointed buffers are on a stable storage - especially if buffers were
written out by jbd2_log_do_checkpoint(), they are likely to be only in disk's
caches. Thus when we update journal superblock effectively removing old
transaction from journal, this write of superblock can get to stable storage
before those checkpointed buffers which can result in filesystem corruption
after a crash. Thus we must unconditionally issue a cache flush before we
update journal superblock in these cases.

A similar problem can also occur if journal superblock is written only in
disk's caches, other transaction starts reusing space of the transaction
cleaned from the log and power failure happens. Subsequent journal replay would
still try to replay the old transaction but some of it's blocks may be already
overwritten by the new transaction. For this reason we must use WRITE_FUA when
updating log tail and we must first write new log tail to disk and update
in-memory information only after that.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-13 22:22:54 -04:00
Nigel Cunningham 35c80422af PM / Sleep: JBD and JBD2 missing set_freezable()
With the latest and greatest changes to the freezer, I started seeing
panics that were caused by jbd2 running post-process freezing and
hitting the canary BUG_ON for non-TuxOnIce I/O submission. I've traced
this back to a lack of set_freezable calls in both jbd and jbd2. Since
they're clearly meant to be frozen (there are tests for freezing()), I
submit the following patch to add the missing calls.

Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-13 22:36:44 +01:00
Jan Kara a78bb11d7a jbd2: protect all log tail updates with j_checkpoint_mutex
There are some log tail updates that are not protected by j_checkpoint_mutex.
Some of these are harmless because they happen during startup or shutdown but
updates in jbd2_journal_commit_transaction() and jbd2_journal_flush() can
really race with other log tail updates (e.g. someone doing
jbd2_journal_flush() with someone running jbd2_cleanup_journal_tail()). So
protect all log tail updates with j_checkpoint_mutex.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-13 15:43:04 -04:00
Jan Kara 24bcc89c7e jbd2: split updating of journal superblock and marking journal empty
There are three case of updating journal superblock. In the first case, we want
to mark journal as empty (setting s_sequence to 0), in the second case we want
to update log tail, in the third case we want to update s_errno. Split these
cases into separate functions. It makes the code slightly more straightforward
and later patches will make the distinction even more important.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-03-13 15:41:04 -04:00
Eric Sandeen 43e625d84f ext4: remove the journal=update mount option
The V2 journal format was introduced around ten years ago,
for ext3. It seems highly unlikely that anyone will need this
migration option for ext4.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:04 -05:00
Yongqiang Yang 4185a2ac42 jbd2: rename functions which initialize slab caches
This patch renames functions initializing the slab caches for the
journal head and handle structures to so they are consistent with the
names of the corresponding functions which destroys those slab caches.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:03 -05:00
Yongqiang Yang 0c2022eccb jbd2: allocate transaction from separate slab cache
There is normally only a handful of these active at any one time, but
putting them in a separate slab cache makes debugging memory
corruption problems easier.  Manish Katiyar also wanted this make it
easier to test memory failure scenarios in the jbd2 layer.

Cc: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:02 -05:00
Seiji Aguchi 2201c590dd jbd2: add drop_transaction/update_superblock_end tracepoints
This patch adds trace_jbd2_drop_transaction and
trace_jbd2_update_superblock_end because there are similar tracepoints
in jbd and they are needed in jbd2 as well.

Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20 17:53:01 -05:00
Tejun Heo a0acae0e88 freezer: unexport refrigerator() and update try_to_freeze() slightly
There is no reason to export two functions for entering the
refrigerator.  Calling refrigerator() instead of try_to_freeze()
doesn't save anything noticeable or removes any race condition.

* Rename refrigerator() to __refrigerator() and make it return bool
  indicating whether it scheduled out for freezing.

* Update try_to_freeze() to return bool and relay the return value of
  __refrigerator() if freezing().

* Convert all refrigerator() users to try_to_freeze().

* Update documentation accordingly.

* While at it, add might_sleep() to try_to_freeze().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
2011-11-21 12:32:22 -08:00
Eryu Guan f2a44523b2 jbd2: Unify log messages in jbd2 code
Some jbd2 code prints out kernel messages with "JBD2: " prefix, at the
same time other jbd2 code prints with "JBD: " prefix. Unify the prefix
to "JBD2: ".

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 19:09:18 -04:00
Eryu Guan 8762202dd0 jbd/jbd2: validate sb->s_first in journal_get_superblock()
I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when
mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3
image has s_first = 0 in journal superblock, and the 0 is passed to
journal->j_head in journal_reset(), then to blocknr in
cleanup_journal_tail(), in the end the J_ASSERT failed.

So validate s_first after reading journal superblock from disk in
journal_get_superblock() to ensure s_first is valid.

The following script could reproduce it:

fstype=ext3
blocksize=1024
img=$fstype.img
offset=0
found=0
magic="c0 3b 39 98"

dd if=/dev/zero of=$img bs=1M count=8
mkfs -t $fstype -b $blocksize -F $img
filesize=`stat -c %s $img`
while [ $offset -lt $filesize ]
do
        if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then
                echo "Found journal: $offset"
                found=1
                break
        fi
        offset=`echo "$offset+$blocksize" | bc`
done

if [ $found -ne 1 ];then
        echo "Magic \"$magic\" not found"
        exit 1
fi

dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1

mkdir -p ./mnt
mount -o loop $img ./mnt

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-11-01 19:04:59 -04:00
Theodore Ts'o 4862fd6047 jbd2: remove jbd2_dev_to_name() from jbd2 tracepoints
Using function calls in TP_printk causes perf heartburn, so print the
MAJOR/MINOR device numbers instead.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-07-10 22:05:08 -04:00
Jan Kara de1b794130 jbd2: Fix oops in jbd2_journal_remove_journal_head()
jbd2_journal_remove_journal_head() can oops when trying to access
journal_head returned by bh2jh(). This is caused for example by the
following race:

	TASK1					TASK2
  jbd2_journal_commit_transaction()
    ...
    processing t_forget list
      __jbd2_journal_refile_buffer(jh);
      if (!jh->b_transaction) {
        jbd_unlock_bh_state(bh);
					jbd2_journal_try_to_free_buffers()
					  jbd2_journal_grab_journal_head(bh)
					  jbd_lock_bh_state(bh)
					  __journal_try_to_free_buffer()
					  jbd2_journal_put_journal_head(jh)
        jbd2_journal_remove_journal_head(bh);

jbd2_journal_put_journal_head() in TASK2 sees that b_jcount == 0 and
buffer is not part of any transaction and thus frees journal_head
before TASK1 gets to doing so. Note that even buffer_head can be
released by try_to_free_buffers() after
jbd2_journal_put_journal_head() which adds even larger opportunity for
oops (but I didn't see this happen in reality).

Fix the problem by making transactions hold their own journal_head
reference (in b_jcount). That way we don't have to remove journal_head
explicitely via jbd2_journal_remove_journal_head() and instead just
remove journal_head when b_jcount drops to zero. The result of this is
that [__]jbd2_journal_refile_buffer(),
[__]jbd2_journal_unfile_buffer(), and
__jdb2_journal_remove_checkpoint() can free journal_head which needs
modification of a few callers. Also we have to be careful because once
journal_head is removed, buffer_head might be freed as well. So we
have to get our own buffer_head reference where it matters.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-06-13 15:38:22 -04:00
Jan Kara bbd2be3691 jbd2: Add function jbd2_trans_will_send_data_barrier()
Provide a function which returns whether a transaction with given tid
will send a flush to the filesystem device.  The function will be used
by ext4 to detect whether fsync needs to send a separate flush or not.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 11:59:18 -04:00
Theodore Ts'o 1be2add685 jbd2: only print the debugging information for tid wraparound once
If we somehow wrap, we don't want to keep printing the warning message
over and over again.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-08 19:37:54 -04:00
Theodore Ts'o deeeaf13b2 jbd2: fix fsync() tid wraparound bug
If an application program does not make any changes to the indirect
blocks or extent tree, i_datasync_tid will not get updated.  If there
are enough commits (i.e., 2**31) such that tid_geq()'s calculations
wrap, and there isn't a currently active transaction at the time of
the fdatasync() call, this can end up triggering a BUG_ON in
fs/jbd2/commit.c:

	J_ASSERT(journal->j_running_transaction != NULL);

It's pretty rare that this can happen, since it requires the use of
fdatasync() plus *very* frequent and excessive use of fsync().  But
with the right workload, it can.

We fix this by replacing the use of tid_geq() with an equality test,
since there's only one valid transaction id that we is valid for us to
wait until it is commited: namely, the currently running transaction
(if it exists).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-01 18:16:26 -04:00
Linus Torvalds a97b52022a Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix data corruption regression by reverting commit 6de9843dab
  ext4: Allow indirect-block file to grow the file size to max file size
  ext4: allow an active handle to be started when freezing
  ext4: sync the directory inode in ext4_sync_parent()
  ext4: init timer earlier to avoid a kernel panic in __save_error_info
  jbd2: fix potential memory leak on transaction commit
  ext4: fix a double free in ext4_register_li_request
  ext4: fix credits computing for indirect mapped files
  ext4: remove unnecessary [cm]time update of quota file
  jbd2: move bdget out of critical section
2011-04-11 15:45:47 -07:00
Zhu Yanhai 50f689af01 jbd2: move bdget out of critical section
bdget() should not be called when we hold spinlocks since
it might sleep.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-04 12:58:12 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Justin P. Mattock 3c26bdb423 jbd: Remove one to many n's in a word.
The Patch below removes one to many "n's" in a word..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-02-28 21:55:58 +01:00
Theodore Ts'o e447183180 jbd2: call __jbd2_log_start_commit with j_state_lock write locked
On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:

	J_ASSERT(journal->j_running_transaction != NULL);

While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request.  Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-02-12 08:18:24 -05:00
Theodore Ts'o 8aefcd557d ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessary
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing.  This allows us to further slim down the ext4_inode_info
structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:29:43 -05:00
Theodore Ts'o b7271b0a39 jbd2: simplify return path of journal_init_common
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-18 13:39:38 -05:00
Theodore Ts'o 670be5a78a jbd2: Use pr_notice_ratelimited() in journal_alloc_journal_head()
We had an open-coded version of printk_ratelimited(); use the provided
abstraction to make the code cleaner and easier to understand.

Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com>

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-17 10:44:16 -05:00
yangsheng 0587aa3d11 jbd2: fix /proc/fs/jbd2/<dev> when using an external journal
In jbd2_journal_init_dev(), we need make sure the journal structure is
fully initialzied before calling jbd2_stats_proc_init().

Reviewed-by: Andreas Dilger <andreas.dilger@oracle.com>
Signed-off-by: yangsheng <sheng.yang@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-17 21:46:26 -05:00
Thomas Gleixner 51dfacdef3 jbd2: Convert jbd2_slab_create_sem to mutex
jbd2_slab_create_sem is used as a mutex, so make it one.

[ akpm muttered: We may as well make it local to
jbd2_journal_create_slab() also. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1010162231480.2496@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-30 12:12:50 +02:00
Linus Torvalds 81280572ca Merge branch 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4,jbd2: convert tracepoints to use major/minor numbers
  ext4: optimize orphan_list handling for ext4_setattr
  ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
  ext4: fix compile error in ext4_fallocate()
  ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
  ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
  ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
  ext4: rename {ext,idx}_pblock and inline small extent functions
  ext4: make various ext4 functions be static
  ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
  ext4: fix kernel oops if the journal superblock has a non-zero j_errno
  ext4: update writeback_index based on last page scanned
  ext4: implement writeback livelock avoidance using page tagging
  ext4: tidy up a void argument in inode.c
  ext4: add batched_discard into ext4 feature list
  ext4: Add batched discard support for ext4
  fs: Add FITRIM ioctl
  ext4: Use return value from sb_issue_discard()
  ext4: Check return value of sb_getblk() and friends
  ext4: use bio layer instead of buffer layer in mpage_da_submit_io
  ...
2010-10-27 21:54:31 -07:00
Theodore Ts'o a107e5a3a4 Merge branch 'next' into upstream-merge
Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h
2010-10-27 23:44:47 -04:00
Linus Torvalds 7d2f280e75 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
  quota: Fix possible oops in __dquot_initialize()
  ext3: Update kernel-doc comments
  jbd/2: fixed typos
  ext2: fixed typo.
  ext3: Fix debug messages in ext3_group_extend()
  jbd: Convert atomic_inc() to get_bh()
  ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
  jbd: Fix debug message in do_get_write_access()
  jbd: Check return value of __getblk()
  ext3: Use DIV_ROUND_UP() on group desc block counting
  ext3: Return proper error code on ext3_fill_super()
  ext3: Remove unnecessary casts on bh->b_data
  ext3: Cleanup ext3_setup_super()
  quota: Fix issuing of warnings from dquot_transfer
  quota: fix dquot_disable vs dquot_transfer race v2
  jbd: Convert bitops to buffer fns
  ext3/jbd: Avoid WARN() messages when failing to write the superblock
  jbd: Use offset_in_page() instead of manual calculation
  jbd: Remove unnecessary goto statement
  jbd: Use printk_ratelimited() in journal_alloc_journal_head()
  ...
2010-10-27 20:13:18 -07:00
Brian King 39e3ac2599 jbd2: Fix I/O hang in jbd2_journal_release_jbd_inode
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.

This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:25:12 -04:00
Andrea Gelmini bcf3d0bcff jbd/2: fixed typos
"wakup"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-10-28 01:30:05 +02:00
Patrick J. LoPresti 1113e1b504 JBD2: Allow feature checks before journal recovery
Before we start accessing a huge (> 16 TiB) OCFS2 volume, we need to
confirm that its journal supports 64-bit offsets.  In particular, we
need to check the journal's feature bits before recovering the journal.

This is not possible with JBD2 at present, because the journal
superblock (where the feature bits reside) is not loaded from disk until
the journal is recovered.

This patch loads the journal superblock in
jbd2_journal_check_used_features() if it has not already been loaded,
allowing us to check the feature bits before journal recovery.

Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10 08:41:54 -07:00
Christoph Hellwig 9cb569d601 remove SWRITE* I/O types
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.

Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers.  Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.

In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-18 01:09:01 -04:00
Linus Torvalds 09dc942c2a Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Adding error check after calling ext4_mb_regular_allocator()
  ext4: Fix dirtying of journalled buffers in data=journal mode
  ext4: re-inline ext4_rec_len_(to|from)_disk functions
  jbd2: Remove t_handle_lock from start_this_handle()
  jbd2: Change j_state_lock to be a rwlock_t
  jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
  ext4: Add mount options in superblock
  ext4: force block allocation on quota_off
  ext4: fix freeze deadlock under IO
  ext4: drop inode from orphan list if ext4_delete_inode() fails
  ext4: check to make make sure bd_dev is set before dereferencing it
  jbd2: Make barrier messages less scary
  ext4: don't print scary messages for allocation failures post-abort
  ext4: fix EFBIG edge case when writing to large non-extent file
  ext4: fix ext4_get_blocks references
  ext4: Always journal quota file modifications
  ext4: Fix potential memory leak in ext4_fill_super
  ext4: Don't error out the fs if the user tries to make a file too big
  ext4: allocate stripe-multiple IOs on stripe boundaries
  ext4: move aio completion after unwritten extent conversion
  ...

Fix up conflicts in fs/ext4/inode.c as per Ted.

Fix up xfs conflicts as per earlier xfs merge.
2010-08-07 13:03:53 -07:00
Theodore Ts'o a931da6ac9 jbd2: Change j_state_lock to be a rwlock_t
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores.  So
change it to be a read/write spinlock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-08-03 21:35:12 -04:00
Theodore Ts'o 47def82672 jbd2: Remove __GFP_NOFAIL from jbd2 layer
__GFP_NOFAIL is going away, so add our own retry loop.  Also add
jbd2__journal_start() and jbd2__journal_restart() which take a gfp
mask, so that file systems can optionally (re)start transaction
handles using GFP_KERNEL.  If they do this, then they need to be
prepared to handle receiving an PTR_ERR(-ENOMEM) error, and be ready
to reflect that error up to userspace.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27 11:56:05 -04:00
Jan Kara 13ceef099e jbd2/ocfs2: Fix block checksumming when a buffer is used in several transactions
OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:

1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
    - This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
    - This copies off b_frozen_data to make it safe for transaction1 to commit.
      jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
    - There was no dirty call for the bh on handle2, so it is never queued for
      any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback.  This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.

This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-15 15:17:47 -07:00
Andi Kleen 5a0790c2c4 ext4: remove initialized but not read variables
No real bugs found, just removed some dead code.

Found by gcc 4.6's new warnings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14 13:28:03 -04:00
Bill Pemberton 8ac97b74bc jbd2: use NULL instead of 0 when pointer is needed
Fixes sparse warning:

fs/jbd2/journal.c:1892:9: warning: Using plain integer as NULL pointer

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
CC: linux-ext4@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-11 10:04:36 +02:00
Theodore Ts'o d2eecb0393 ext4: Use slab allocator for sub-page sized allocations
Now that the SLUB seems to be fixed so that it respects the requested
alignment, use kmem_cache_alloc() to allocator if the block size of
the buffer heads to be allocated is less than the page size.
Previously, we were using 16k page on a Power system for each buffer,
even when the file system was using 1k or 4k block size.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-07 10:36:20 -05:00
Andrew Morton 3ebfdf885a jbd2: don't use __GFP_NOFAIL in journal_init_common()
It triggers the warning in get_page_from_freelist(), and it isn't
appropriate to use __GFP_NOFAIL here anyway.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843

Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23 08:05:15 -05:00
Yin Kangkai 765f836190 jbd: jbd-debug and jbd2-debug should be writable
jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23 13:44:13 +01:00
Theodore Ts'o 3b799d15f2 jbd2: Export jbd2_log_start_commit to fix ext4 build
This fixes:
    ERROR: "jbd2_log_start_commit" [fs/ext4/ext4.ko] undefined!

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-09 20:42:53 -05:00
Theodore Ts'o e6ec116b67 jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
OOM happens.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-01 09:04:42 -05:00
Theodore Ts'o e6a47428de jbd2: don't wipe the journal on a failed journal checksum
If there is a failed journal checksum, don't reset the journal.  This
allows for userspace programs to decide how to recover from this
situation.  It may be that ignoring the journal checksum failure might
be a better way of recovering the file system.  Once we add per-block
checksums, we can definitely do better.  Until then, a system
administrator can try backing up the file system image (or taking a
snapshot) and and trying to determine experimentally whether ignoring
the checksum failure or aborting the journal replay results in less
data loss.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
2009-11-15 15:31:37 -05:00
Tao Ma 7b02bec07e JBD/JBD2: free j_wbuf if journal init fails.
If journal init fails, we need to free j_wbuf.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-11 15:24:14 +01:00
Alexey Dobriyan 828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Theodore Ts'o bf6993276f jbd2: Use tracepoints for history file
The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure.  We
save memory as a bonus.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-30 00:32:06 -04:00
Theodore Ts'o 90576c0b9a ext4, jbd2: Drop unneeded printks at mount and unmount time
There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted.  Disable them to economize space
in the system logs.  In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-29 15:51:30 -04:00
James Morris 88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Jan Kara f6f50e28f0 jbd2: Fail to load a journal if it is too short
Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-17 10:40:01 -04:00
dingdinghua 96577c4382 jbd2: fix race between write_metadata_buffer and get_write_access
The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal.  Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.

Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-13 17:55:35 -04:00
Theodore Ts'o b574480507 jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
Fix jbd2_dev_to_name(), a function used when pretty-printting jbd2 and
ext4 tracepoints.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-20 23:34:44 -04:00
Theodore Ts'o 879c5e6b7c jbd2: convert instrumentation from markers to tracepoints
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 11:47:48 -04:00
Alberto Bertogli bfcd3555af jbd2: Fix minor typos in comments in fs/jbd2/journal.c
Signed-off-by: Alberto Bertogli <albertito@blitiri.com.ar>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2009-06-09 00:06:20 -04:00
Jan Kara c88ccea314 jbd2: Fix return value of jbd2_journal_start_commit()
The function jbd2_journal_start_commit() returns 1 if either a
transaction is committing or the function has queued a transaction
commit. But it returns 0 if we raced with somebody queueing the
transaction commit as well. This resulted in ext4_sync_fs() not
functioning correctly (description from Arthur Jones): 

   In the case of a data=ordered umount with pending long symlinks
   which are delayed due to a long list of other I/O on the backing
   block device, this causes the buffer associated with the long
   symlinks to not be moved to the inode dirty list in the second
   phase of fsync_super.  Then, before they can be dirtied again,
   kjournald exits, seeing the UMOUNT flag and the dirty pages are
   never written to the backing block device, causing long symlink
   corruption and exposing new or previously freed block data to
   userspace.

This can be reproduced with a script created by Eric Sandeen
<sandeen@redhat.com>:

        #!/bin/bash

        umount /mnt/test2
        mount /dev/sdb4 /mnt/test2
        rm -f /mnt/test2/*
        dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512
        touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
        ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
        /mnt/test2/link
        umount /mnt/test2
        mount /dev/sdb4 /mnt/test2
        ls /mnt/test2/

This patch fixes jbd2_journal_start_commit() to always return 1 when
there's a transaction committing or queued for commit.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Eric Sandeen <sandeen@redhat.com>
CC: linux-ext4@vger.kernel.org
2009-02-10 11:27:46 -05:00
Simon Holm Thøgersen c225aa57ff ext4: fix wrong use of do_div
the following warning:

fs/jbd2/journal.c: In function ‘jbd2_seq_info_show’:
fs/jbd2/journal.c:850: warning: format ‘%lu’ expects type ‘long
unsigned int’, but argument 3 has type ‘uint32_t’

is caused by wrong usage of do_div that modifies the dividend in-place
and returns the quotient. So not only would an incorrect value be
displayed, but s->journal->j_average_commit_time would also be changed
to a wrong value!

Fix it by using div_u64 instead.

Signed-off-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-11 22:34:01 -05:00
Linus Torvalds 2150edc6c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...
2009-01-08 17:14:59 -08:00
Jan Kara 4b905671d2 jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
On 32-bit system with CONFIG_LBD getblk can fail because provided
block number is too big.  Add error checks so we fail gracefully if
getblk() returns NULL (which can also happen on memory allocation
failures).

Thanks to David Maciejak from Fortinet's FortiGuard Global Security
Research Team for reporting this bug.

http://bugzilla.kernel.org/show_bug.cgi?id=12370

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org
2009-01-06 14:53:35 -05:00
Joel Becker e06c8227fd jbd2: Add buffer triggers
Filesystems often to do compute intensive operation on some
metadata.  If this operation is repeated many times, it can be very
expensive.  It would be much nicer if the operation could be performed
once before a buffer goes to disk.

This adds triggers to jbd2 buffer heads.  Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer.  If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.

ocfs2 will use this feature.

Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion.  It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t).  So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.

There is only one trigger set allowed per buffer.  I can't think of any
reason to attach more than one set.  Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.

The trigger sets are considered static allocation from the jbd2
perspective.  ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:30 -08:00
Theodore Ts'o 4a9bf99b20 jbd2: Add pid and journal device name to the "kjournald2 starting" message
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03 22:56:44 -05:00
Theodore Ts'o c319106723 ext4: Remove code to create the journal inode
This code has been obsolete in quite some time, since the supported
method for adding a journal inode is to use tune2fs (or to creating
new filesystem with a journal via mke2fs or mkfs.ext4).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-06 11:14:25 -05:00
Theodore Ts'o 1a0d3786dd jbd2: Remove a large array of bh's from the stack of the checkpoint routine
jbd2_log_do_checkpoint()n is one of the kernel's largest stack users.
Move the array of buffer head's from the stack of jbd2_log_do_checkpoint()
to the in-core journal structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-05 00:09:22 -05:00
Theodore Ts'o 30773840c1 ext4: add fsync batch tuning knobs
Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03 20:27:38 -05:00
Theodore Ts'o d7cfa4684d ext4: display average commit time
Display the average commit time (which is used by the ext4 fsync
batching patch) in /proc/fs/jbd2/*/info for performance tuning
purposes.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-12-17 00:20:45 -05:00
Sami Liedes 2423840ded jbd2: deregister proc on failure in jbd2_journal_init_inode
jbd2_journal_init_inode() does not call jbd2_stats_proc_exit() on all
failure paths after calling jbd2_stats_proc_init(). This leaves
dangling references to the fs in proc.

This patch fixes a bug reported by Sami Leides at:
http://bugzilla.kernel.org/show_bug.cgi?id=11493

Signed-off-by: Sami Liedes <sliedes@cc.hut.fi>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-02 19:23:30 -05:00
Hidehiro Kawai 44519faf22 jbd2: fix error handling for checkpoint io
When a checkpointing IO fails, current JBD2 code doesn't check the
error and continue journaling.  This means latest metadata can be
lost from both the journal and filesystem.

This patch leaves the failed metadata blocks in the journal space
and aborts journaling in the case of jbd2_log_do_checkpoint().
To achieve this, we need to do:

1. don't remove the failed buffer from the checkpoint list where in
   the case of __try_to_free_cp_buf() because it may be released or
   overwritten by a later transaction
2. jbd2_log_do_checkpoint() is the last chance, remove the failed
   buffer from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
   prevent the journaled contents from being cleaned.  For safety,
   don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext4 layer so
   that ext4 don't clear the needs_recovery flag, otherwise the
   journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent jbd2_cleanup_journal_tail() from being called between
   __jbd2_journal_drop_transaction() and jbd2_journal_abort()
   (a possible race issue between jbd2_log_do_checkpoint()s called by
   jbd2_journal_flush() and __jbd2_log_wait_for_space())

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2008-10-10 20:29:13 -04:00
Theodore Ts'o 914258bf2c ext4/jbd2: Avoid WARN() messages when failing to write to the superblock
This fixes some very common warnings reported by kerneloops.org

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-06 21:35:40 -04:00
Theodore Ts'o 05496769e5 jbd2: clean up how the journal device name is printed
Calculate the journal device name once and stash it away in the
journal_s structure.  This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer.  In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-16 14:36:17 -04:00
Theodore Ts'o 00b32b7fb6 ext4: unexport jbd2_journal_update_superblock
Remove the unused EXPORT_SYMBOL(jbd2_journal_update_superblock).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-26 17:33:53 -04:00
Jan Kara 87c89c232c jbd2: Remove data=ordered mode support using jbd buffer heads
Signed-off-by: Jan Kara <jack@suse.cz>
2008-07-11 19:27:31 -04:00
Jan Kara c851ed5401 jbd2: Implement data=ordered mode handling via inodes
This patch adds necessary framework into JBD2 to be able to track inodes
with each transaction and write-out their dirty data during transaction
commit time.

This new ordered mode brings all sorts of advantages such as possibility 
to get rid of journal heads and buffer heads for data buffers in ordered 
mode, better ordering of writes on transaction commit, simplification of
 some JBD code, no more anonymous pages when truncate of data being 
committed happens.  Also with this new ordered mode, delayed allocation 
on ordered mode is much simpler.

Signed-off-by: Jan Kara <jack@suse.cz>
2008-07-11 19:27:31 -04:00
Jean Delvare f36f21ecca Fix misuses of bdevname()
bdevname() fills the buffer that it is given as a parameter, so calling
strcpy() or snprintf() on the returned value is redundant (and probably not
guaranteed to work - I don't think strcpy and snprintf support overlapping
buffers.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:26 -07:00
Harvey Harrison 329d291f50 jdb2: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Duane Griffin 620de4e198 jbd2: only create debugfs and stats entries if init is successful
jbd2 debugfs and stats entries should only be created if cache initialisation
is successful.  At the moment they are being created unconditionally which
will leave them dangling if cache (and hence module) initialisation fails.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 22:02:47 -04:00
Randy Dunlap 5648ba5b2d jbd2: fix kernel-doc notation
Fix kernel-doc notation in jbd2.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Duane Griffin 8a9362eb40 jbd2: replace potentially false assertion with if block
If an error occurs during jbd2 cache initialisation it is possible for the
journal_head_cache to be NULL when jbd2_journal_destroy_journal_head_cache is
called.  Replace the J_ASSERT with an if block to handle the situation
correctly.

Note that even with this fix things will break badly if jbd2 is statically
compiled in and cache initialisation fails.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Denis V. Lunev 79da3664f6 jbd2: use non-racy method for proc entries creation
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:20 -07:00
Al Viro 1076d17ac7 jbd/jbd2 NULL noise
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30 14:18:41 -07:00
Mingming Cao 77160957e2 jbd2: Mark jbd2 slabs as SLAB_TEMPORARY
This patch marks slab allocations by jbd2 as short-lived in support of
Mel Gorman's "Group short-lived and reclaimable kernel allocations"
patch.  (Ported from similar changes made to fs/jbd/journal.c and
fs/jbd/revoke.c in Mel's patch.)

Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Girish Shilamkar 818d276ceb ext4: Add the journal checksum feature
The journal checksum feature adds two new flags i.e
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM.

JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the
checksum for the blocks described by the descriptor blocks.
Due to checksums, writing of the commit record no longer needs to be
synchronous. Now commit record can be sent to disk without waiting for
descriptor blocks to be written to disk. This behavior is controlled
using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be
able to recover the journal with _ASYNC_COMMIT hence it is made
incompat.
The commit header has been extended to hold the checksum along with the
type of the checksum.

For recovery in pass scan checksums are verified to ensure the sanity
and completeness(in case of _ASYNC_COMMIT) of every transaction.

Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2008-01-28 23:58:27 -05:00
Johann Lombardi 8e85fb3f30 jbd2: jbd2 stats through procfs
The patch below updates the jbd stats patch to 2.6.20/jbd2.
The initial patch was posted by Alex Tomas in December 2005
(http://marc.info/?l=linux-ext4&m=113538565128617&w=2).
It provides statistics via procfs such as transaction lifetime and size.

Sometimes, investigating performance problems, i find useful to have
stats from jbd about transaction's lifetime, size, etc. here is a
patch for review and inclusion probably.

for example, stats after creation of 3M files in htree directory:

[root@bob ~]# cat /proc/fs/jbd/sda/history
R/C  tid   wait  run   lock  flush log   hndls  block inlog ctime write drop  close
R    261   8260  2720  0     0     750   9892   8170  8187
C    259                                                    750   0     4885  1
R    262   20    2200  10    0     770   9836   8170  8187
R    263   30    2200  10    0     3070  9812   8170  8187
R    264   0     5000  10    0     1340  0      0     0
C    261                                                    8240  3212  4957  0
R    265   8260  1470  0     0     4640  9854   8170  8187
R    266   0     5000  10    0     1460  0      0     0
C    262                                                    8210  2989  4868  0
R    267   8230  1490  10    0     4440  9875   8171  8188
R    268   0     5000  10    0     1260  0      0     0
C    263                                                    7710  2937  4908  0
R    269   7730  1470  10    0     3330  9841   8170  8187
R    270   0     5000  10    0     830   0      0     0
C    265                                                    8140  3234  4898  0
C    267                                                    720   0     4849  1
R    271   8630  2740  20    0     740   9819   8170  8187
C    269                                                    800   0     4214  1
R    272   40    2170  10    0     830   9716   8170  8187
R    273   40    2280  0     0     3530  9799   8170  8187
R    274   0     5000  10    0     990   0      0     0


where,

R     - line for transaction's life from T_RUNNING to T_FINISHED
C     - line for transaction's checkpointing
tid   - transaction's id
wait  - for how long we were waiting for new transaction to start
         (the longest period journal_start() took in this transaction)
run   - real transaction's lifetime (from T_RUNNING to T_LOCKED
lock  - how long we were waiting for all handles to close
         (time the transaction was in T_LOCKED)
flush - how long it took to flush all data (data=ordered)
log   - how long it took to write the transaction to the log
hndls - how many handles got to the transaction
block - how many blocks got to the transaction
inlog - how many blocks are written to the log (block + descriptors)
ctime - how long it took to checkpoint the transaction
write - how many blocks have been written during checkpointing
drop  - how many blocks have been dropped during checkpointing
close - how many running transactions have been closed to checkpoint this one

all times are in msec.


[root@bob ~]# cat /proc/fs/jbd/sda/info
280 transaction, each upto 8192 blocks
average:
  1633ms waiting for transaction
  3616ms running transaction
  5ms transaction was being locked
  1ms flushing data (in ordered mode)
  1799ms logging transaction
  11781 handles per transaction
  5629 blocks per transaction
  5641 logged blocks per transaction

Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28 23:58:27 -05:00
Jose R. Santos 6f38c74f5a JBD2: debug code cleanup.
Mostly stolen from akpm's JBD cleanup patch.

- use `#ifdef foo' instead of `#if defined(foo)'

- Make journal_enable_debug __read_mostly just for the heck of it

- Make jbd_debugfs_dir and jbd_debug static

- debugfs_remove(NULL) is legal: remove unneeded tests

- remove unnecessary empty loops

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-10-17 18:49:59 -04:00
Mingming Cao cd02ff0b14 jbd2: JBD_XXX to JBD2_XXX naming cleanup
change JBD_XXX macros to JBD2_XXX in JBD2/Ext4

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-10-17 18:49:58 -04:00
Mingming Cao d802ffa885 JBD2/Ext4: Convert kmalloc to kzalloc in jbd2/ext4
Convert kmalloc to kzalloc() and get rid of the memset().

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao 2d917969bc JBD2: replace jbd_kmalloc with kmalloc directly.
This patch cleans up jbd_kmalloc and replace it with kmalloc directly

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao af1e76d6b3 JBD2: jbd2 slab allocation cleanups
JBD2: Replace slab allocations with page allocations

JBD2 allocate memory for committed_data and frozen_data from slab. However
JBD2 should not pass slab pages down to the block layer. Use page allocator
pages instead. This will also prepare JBD for the large blocksize patchset.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:56 -04:00
Paul Mundt 20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Jose R. Santos 0f49d5d019 jbd2: Move jbd2-debug file to debugfs
The jbd2-debug file used to be located in /proc/sys/fs/jbd2-debug, but it
incorrectly used create_proc_entry() instead of the sysctl routines, and
no proc entry was ever created.

Instead of fixing this we might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd2/jbd2-debug.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 08:50:18 -04:00
Jose R. Santos e23291b912 jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG
When the JBD code was forked to create the new JBD2 code base, the
references to CONFIG_JBD_DEBUG where never changed to
CONFIG_JBD2_DEBUG.  This patch fixes that.

Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 08:57:06 -04:00
Pavel Emelianov 97f0678467 jbd: check for error returned by kthread_create on creating journal thread
If the thread failed to create the subsequent wait_event will hang forever.

This is likely to happen if kernel hits max_threads limit.

Will be critical for virtualization systems that limit the number of tasks
and kernel memory usage within the container.

(akpm: JBD should be converted fully to the kthread API: kthread_should_stop()
and kthread_stop()).

Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:13 -07:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Nigel Cunningham 7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Dave Kleikamp 5eb30790d4 [PATCH] null dereference in fs/jbd2/journal.c
This is Eric Sesterhenn's jbd patch applied to jbd2.
Commit: 41716c7c21

His words:

Since commit d1807793e1 we dereference a NULL
pointer.  Coverity id #1432.  We set journal to NULL, and use it directly
afterwards.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:43 -07:00
Mingming Cao 18eba7aae0 [PATCH] jbd2: switch blks_type from sector_t to ull
Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:18 -07:00
Mingming Cao 299717696d [PATCH] jbd2: sector_t conversion
JBD layer in-kernel block varibles type fixes to support >32 bit block number
and convert to sector_t type.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:17 -07:00
Zach Brown b517bea1c7 [PATCH] 64-bit jbd2 core
Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown.  This patch is useful only after adding support for 64-bit block
numbers in the filesystem.

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:16 -07:00
Johann Lombardi a920e9416b [PATCH] jbd2: rename slab
jbd and jbd2 currently use the same slab names which must be unique.  The
patch below just renames jbd2's slabs.

Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Mingming Cao f7f4bccb72 [PATCH] jbd2: rename jbd2 symbols to avoid duplication of jbd symbols
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Dave Kleikamp 470decc613 [PATCH] jbd2: initial copy of files from jbd
This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00