A multithreaded namespace creation/destruction stress test currently
deadlocks with the following lockup signature:
INFO: task ndctl:2924 blocked for more than 122 seconds.
Tainted: G OE 5.2.0-rc4+ #3382
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ndctl D 0 2924 1176 0x00000000
Call Trace:
? __schedule+0x27e/0x780
schedule+0x30/0xb0
wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm]
? finish_wait+0x80/0x80
uuid_store+0xe6/0x2e0 [libnvdimm]
kernfs_fop_write+0xf0/0x1a0
vfs_write+0xb7/0x1b0
ksys_write+0x5c/0xd0
do_syscall_64+0x60/0x240
INFO: task ndctl:2923 blocked for more than 122 seconds.
Tainted: G OE 5.2.0-rc4+ #3382
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ndctl D 0 2923 1175 0x00000000
Call Trace:
? __schedule+0x27e/0x780
? __mutex_lock+0x489/0x910
schedule+0x30/0xb0
schedule_preempt_disabled+0x11/0x20
__mutex_lock+0x48e/0x910
? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
? __lock_acquire+0x23f/0x1710
? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
__dax_pmem_probe+0x5e/0x210 [dax_pmem_core]
? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm]
dax_pmem_probe+0xc/0x20 [dax_pmem]
nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]
really_probe+0xef/0x390
driver_probe_device+0xb4/0x100
In this sequence an 'nd_dax' device is being probed and trying to take
the lock on its backing namespace to validate that the 'nd_dax' device
indeed has exclusive access to the backing namespace. Meanwhile, another
thread is trying to update the uuid property of that same backing
namespace. So one thread is in the probe path trying to acquire the
lock, and the other thread has acquired the lock and tries to flush the
probe path.
Fix this deadlock by not holding the namespace device_lock over the
wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires
the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and
subsequently dropped internally to wait_nvdimm_bus_probe_idle().
Cc: <stable@vger.kernel.org>
Fixes: bf9bccc14c ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for fixing a deadlock between wait_for_bus_probe_idle()
and the nvdimm_bus_list_mutex arrange for __nd_ioctl() without
nvdimm_bus_list_mutex held. This also unifies the 'dimm' and 'bus' level
ioctls into a common nd_ioctl() preamble implementation.
Marked for -stable as it is a pre-requisite for a follow-on fix.
Cc: <stable@vger.kernel.org>
Fixes: bf9bccc14c ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341209518.292348.7183897251740665198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for not holding a lock over the execution of nd_ioctl(),
update the implementation to allow multiple threads to be attempting
ioctls at the same time. The bus lock still prevents multiple in-flight
->ndctl() invocations from corrupting each other's state, but static
global staging buffers are moved to the heap.
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/156341208947.292348.10560140326807607481.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Namespace activation expects to be able to reference region badblocks.
The following warning sometimes triggers when asynchronous namespace
activation races in front of the completion of namespace probing. Move
all possible namespace probing after region badblocks initialization.
Otherwise, lockdep sometimes catches the uninitialized state of the
badblocks seqlock with stack trace signatures like:
INFO: trying to register non-static key.
pmem2: detected capacity change from 0 to 136365211648
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 9 PID: 358 Comm: kworker/u80:5 Tainted: G OE 5.2.0-rc4+ #3382
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack+0x85/0xc0
pmem1.12: detected capacity change from 0 to 8589934592
register_lock_class+0x56a/0x570
? check_object+0x140/0x270
__lock_acquire+0x80/0x1710
? __mutex_lock+0x39d/0x910
lock_acquire+0x9e/0x180
? nd_pfn_validate+0x28f/0x440 [libnvdimm]
badblocks_check+0x93/0x1f0
? nd_pfn_validate+0x28f/0x440 [libnvdimm]
nd_pfn_validate+0x28f/0x440 [libnvdimm]
? lockdep_hardirqs_on+0xf0/0x180
nd_dax_probe+0x9a/0x120 [libnvdimm]
nd_pmem_probe+0x6d/0x180 [nd_pmem]
nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]
Fixes: 48af2f7e52 ("libnvdimm, pfn: during init, clear errors...")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/156341208365.292348.1547528796026249120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A multithreaded namespace creation/destruction stress test currently
fails with signatures like the following:
sysfs group 'power' not found for kobject 'dax1.1'
RIP: 0010:sysfs_remove_group+0x76/0x80
Call Trace:
device_del+0x73/0x370
device_unregister+0x16/0x50
nd_async_device_unregister+0x1e/0x30 [libnvdimm]
async_run_entry_fn+0x39/0x160
process_one_work+0x23c/0x5e0
worker_thread+0x3c/0x390
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:klist_put+0x1b/0x6c
Call Trace:
klist_del+0xe/0x10
device_del+0x8a/0x2c9
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
device_unregister+0x44/0x4f
nd_async_device_unregister+0x22/0x2d [libnvdimm]
async_run_entry_fn+0x47/0x15a
process_one_work+0x1a2/0x2eb
worker_thread+0x1b8/0x26e
Use the kill_device() helper to atomically resolve the race of multiple
threads issuing kill, device_unregister(), requests.
Reported-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Fixes: 4d88a97aa9 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...")
Cc: <stable@vger.kernel.org>
Link: https://github.com/pmem/ndctl/issues/96
Tested-by: Tested-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/156341207846.292348.10435719262819764054.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The libnvdimm subsystem arranges for devices to be destroyed as a result
of a sysfs operation. Since device_unregister() cannot be called from
an actively running sysfs attribute of the same device libnvdimm
arranges for device_unregister() to be performed in an out-of-line async
context.
The driver core maintains a 'dead' state for coordinating its own racing
async registration / de-registration requests. Rather than add local
'dead' state tracking infrastructure to libnvdimm device objects, export
the existing state tracking via a new kill_device() helper.
The kill_device() helper simply marks the device as dead, i.e. that it
is on its way to device_del(), or returns that the device was already
dead. This can be used in advance of calling device_unregister() for
subsystems like libnvdimm that might need to handle multiple user
threads racing to delete a device.
This refactoring does not change any behavior, but it is a pre-requisite
for follow-on fixes and therefore marked for -stable.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Fixes: 4d88a97aa9 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...")
Cc: <stable@vger.kernel.org>
Tested-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/156341207332.292348.14959761496009347574.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlz8BN0THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi0P5B/0dESu+t5AHG1qJbGdfDEfX6TmDRwn+
Z/O22zlEwm25nAljfOYVsga6ZL08VUi7aWrdnyu9CkABPO9XZNDCQvqs/7FBUiaO
ShRYY8hFWoAnpdSPraaDEiA7Z+4dNF5fSVMpNtRzjPFXDyxSrn/aArXqwAHNMFQY
fNBL8gzKYQV0bwsCv13SpCA/ENjXMY61+mhYSA1OXaTLDQXDLwqzxaotlE6tzIvK
NnS5SRr2ph1t3ChfUOLCoad2ZwkSETfDiqEeTp36oOe3ns6qGnIk7rSqMqTJN891
a92n2RdXXpcBugvJUlHTalZdNrSJbPuGT0WFYLKNY6BERramtiTAGvf2
=bJxo
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A change to call iput() asynchronously to avoid a possible deadlock
when iput_final() needs to wait for in-flight I/O (e.g. readahead) and
a fixup for a cleanup that went into -rc1"
* tag 'ceph-for-5.2-rc4' of git://github.com/ceph/ceph-client:
ceph: fix error handling in ceph_get_caps()
ceph: avoid iput_final() while holding mutex or in dispatch thread
ceph: single workqueue for inode related works
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXPueuwAKCRCAXGG7T9hj
vny1AQD66u7lSYrRQ/bBmqaVhvWnAHwWmbDtWBqHQNuDokdu7gD9HqczpRabZn1W
acsXPwqx9IByDzJKQO+lz5rmy/pOxwI=
=7u09
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just one fix for the Xen block frontend driver avoiding allocations
with order > 0"
* tag 'for-linus-5.2b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one
context (e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore,
the exception handler may resolve to the wrong address space.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJc+31MAAoJECIOw3kbKW7CTKcP/jda+jHCfNBfta23wGDhjjUK
77swcIQ77QEi507/NEWxE/leDkoedyIA6lLI6w2hcjm2sGBPndCJeoAiQfHA7Y5s
xX+zTDZBYbUyOCI3o+s0M5oCp3N1F3IyUXJqHIczN44IZOOYFsDkgxXam2rie7Xx
INwIoq1DsQGUYk4kkLY1eLjjwaEPo2I77rqS2mF8KyTskCZ6nMtULY+Cui9zIb3v
PLOKFRNY32OUIt+CjcAbb0bujjVETPuOs8cAK6ZOsZtM59o48iVphwxi1ZYGQlXd
0WNsBWCRKfknfLytm0R9TEfKn+CcG/rMtpv5GnOFa1aA4avl60eHgzPaWxz4JIjQ
Q/dkciM52D8MoY0od2QSZr4RXtdb+NYlvmjSSUJ0zjdbppmg5cCIc16FyDfuCn+y
b3+hrA+IcPBHP2JNp/GncV5SWHlrleCDoJyBYO+x1u9zeVFcivZSrzrbr5dhoRB/
cwy9/2hNquIS+/7CC0HajLnR5q8D5jG9lfKTY2ZaQGHEr98czgQCWsfqQm1rFU9S
BCOPkioGdhD3IpJyjOi4y02/0pvNCV6xEpcsMuotrnwm77+Qum0F6jb5wIsZsqAz
mUeBIxqsxhGo4V7CBGkzuweJU1Lv2Pev0E3HATdauyvbjjCQxx7ud9xUUx1sIHjJ
Je7l0Dn8xSWmXxUEWVAh
=8Ewa
-----END PGP SIGNATURE-----
Merge tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXPtXKRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2wxQD+NM+gBaLkqHO2VKGPeBgkenwG2ehK
rY4eeO+7/tMC7AsA/iFaSD3E8VZesao0tkYCC2lxl3o0avkzExwwkzbHAjsK
=3ysz
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Here are some small char and misc driver fixes for 5.2-rc4 to resolve a
number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs fixes.
Those changes move the header file info into sysfs and fixes the build
issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuEVg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yma0QCfVPa7r1rHqljz1UgvjKJTzVg8g9wAn1W1mddx
MIlG+0+ZnBdaPzyzoY1O
=0LJD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
Pull i2c fixes from Wolfram Sang:
"I2C has a driver bugfix and a MAINTAINERS fix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Karthikeyan Ramasubramanian is MIA
i2c: xiic: Add max_read_len quirk
The fixes for this round are in drivers:
- jz4780 transfer fix for acking descriptors early
- fsl-qdma: clean registers on error
- dw-axi-dmac: null pointer dereference fix
- mediatek-cqdma: fix sleeping in atomic context
- tegra210-adma: fix bunch os issues like crashing in driver
probe, channel FIFO configuration etc.
- sprd: Fixes for possible crash on descriptor status, block
length overflow. For 2-stage transfer fix incorrect start,
configuration and interrupt handling.
-----BEGIN PGP SIGNATURE-----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=Ca0d
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- jz4780 transfer fix for acking descriptors early
- fsl-qdma: clean registers on error
- dw-axi-dmac: null pointer dereference fix
- mediatek-cqdma: fix sleeping in atomic context
- tegra210-adma: fix bunch os issues like crashing in driver probe,
channel FIFO configuration etc.
- sprd: Fixes for possible crash on descriptor status, block length
overflow. For 2-stage transfer fix incorrect start, configuration and
interrupt handling.
* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: sprd: Add interrupt support for 2-stage transfer
dmaengine: sprd: Fix the right place to configure 2-stage transfer
dmaengine: sprd: Fix block length overflow
dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
dmaengine: sprd: Add validation of current descriptor in irq handler
dmaengine: sprd: Fix the possible crash when getting descriptor status
dmaengine: tegra210-adma: Fix spelling
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: mediatek-cqdma: sleeping in atomic context
dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
dmaengine: fsl-qdma: Add improvement
dmaengine: jz4780: Fix transfers being ACKed too soon
-----BEGIN PGP SIGNATURE-----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=vG32
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190608' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Allow symlink from the bfq.weight cgroup parameter to the general
weight (Angelo)
- Damien is new skd maintainer (Bart)
- NVMe pull request from Sagi, with a few small fixes.
- Ensure we set DMA segment size properly, dma-debug is now tripping on
these (Christoph)
- Remove useless debugfs_create() return check (Greg)
- Remove redundant unlikely() check on IS_ERR() (Kefeng)
- Fixup request freeing on exit (Ming)
* tag 'for-linus-20190608' of git://git.kernel.dk/linux-block:
block, bfq: add weight symlink to the bfq.weight cgroup parameter
cgroup: let a symlink too be created with a cftype file
block: free sched's request pool in blk_cleanup_queue
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
mmc: also set max_segment_size in the device
mtip32xx: also set max_segment_size in the device
rsxx: don't call dma_set_max_seg_size
nvme-pci: don't limit DMA segement size
block: Drop unlikely before IS_ERR(_OR_NULL)
block: aoe: no need to check return value of debugfs_create functions
nvmet: fix data_len to 0 for bdev-backed write_zeroes
MAINTAINERS: Hand over skd maintainership
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
Two bug fixes, both for fairly serious problems; the UFS one looks
like it could be used to exfiltrate data from the kernel, although
probably only a privileged user has access to the command management
interface and the missing unlock in smartpqi is long standing and
probably a little used error path.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXPtPfyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishV8bAP9ZWyAE
2S5emgr42Q9IunXQ305k1i/ek4y5iq3VVLmJqAD/cJgZiCcNenry8jf9McRGFBKO
HOLewQ+ErQvjf6DuxMM=
=7+Oe
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two bug fixes, both for fairly serious problems; the UFS one looks
like it could be used to exfiltrate data from the kernel, although
probably only a privileged user has access to the command management
interface and the missing unlock in smartpqi is long standing and
probably a little used error path"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: smartpqi: unlock on error in pqi_submit_raid_request_synchronous()
scsi: ufs: Check that space was properly alloced in copy_query_response
This Kselftest second fixes update for Linux 5.2-rc4 consists of a single
fix for vm test build failure regression when it is built by itself.
-----BEGIN PGP SIGNATURE-----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=G2Eg
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"This consists of a single fix for a vm test build failure regression
when it is built by itself"
* tag 'linux-kselftest-5.2-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vm: Fix test build failure when built by itself
-----BEGIN PGP SIGNATURE-----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=elzi
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A small bit more lively this week but not majorly so. I'm away in
Japan next week for family holiday, so I'll be pretty disconnected,
I've asked Daniel to do fixes for the week while I'm out.
The nouveau firmware changes are a bit large, but they address a big
problem where a whole set of boards don't load with the driver, and
the new firmware fixes that, so I think it's worth trying to land it
now.
core:
- Allow fb changes in async commits (drivers as well)
udmabuf:
- Unmap scatterlist when unmapping udmabuf
nouveau:
- firmware loading fixes for secboot firmware on new GPU revision.
komeda:
- oops, dma mapping and warning fixes
arm-hdlcd:
- clock fixes
- mode validation fix
i915:
- Add a missing Icelake workaround
- GVT - DMA map fault fix and enforcement fixes
amdgpu:
- DCE resume fix
- New raven variation updates"
* tag 'drm-fixes-2019-06-07-1' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
drm/nouveau/secboot: split out FW version-specific LS function pointers
drm/nouveau/secboot: pass max supported FW version to LS load funcs
drm/nouveau/core: support versioned firmware loading
drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
drm/komeda: Potential error pointer dereference
drm/komeda: remove set but not used variable 'kcrtc'
drm/amd/amdgpu: add RLC firmware to support raven1 refresh
drm/amd/powerplay: add set_power_profile_mode for raven1_refresh
drm/amdgpu: fix ring test failure issue during s3 in vce 3.0 (V2)
udmabuf: actually unmap the scatterlist
drm/arm/hdlcd: Allow a bit of clock tolerance
drm/arm/hdlcd: Actually validate CRTC modes
drm/arm/mali-dp: Add a loop around the second set CVAL and try 5 times
drm/komeda: fixing of DMA mapping sg segment warning
drm: don't block fb changes for async plane updates
drm/vc4: fix fb references in async update
drm/msm: fix fb references in async update
drm/amd: fix fb references in async update
...
A mail just bounced back with "user unknown":
550 5.1.1 <kramasub@codeaurora.org> User doesn't exist
I also couldn't find a more recent address in git history. So, remove
this stale entry.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.
This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fix a couple of inconsistencies and locking problems in pmbus driver.
Register with thermal subsystem only on systems supporting devicetree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QTDh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix a couple of inconsistencies and locking problems in pmbus driver
- Register with thermal subsystem only on systems supporting devicetree
* tag 'hwmon-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/core) Treat parameters as paged if on multiple pages
hwmon: (pmbus/core) mutex_lock write in pmbus_set_samples
hwmon: (core) add thermal sensors only if dev->of_node is present
The lockref cmpxchg loop is unbound as long as the spinlock is not
taken. Depending on the hardware implementation of compare-and-swap
a high number of loop retries might happen.
Add an upper bound to the loop to force the fallback to spinlocks
after some time. A retry value of 100 should not impact any hardware
that does not have this issue.
With the retry limit the performance of an open-close testcase
improved between 60-70% on ThunderX2.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jan Glauber <jglauber@marvell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Architectures that support memory tagging have a need to perform untagging
(stripping the tag) in various parts of the kernel. This patch adds an
untagged_addr() macro, which is defined as noop for architectures that do
not support memory tagging. The oncoming patch series will define it at
least for sparc64 and arm64.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- fix section mismatch between memblock_reserve and mem_reserve. This
fixes tinyconfig xtensa builds.
-----BEGIN PGP SIGNATURE-----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=4yeH
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fix from Max Filippov:
"Fix a section mismatch between memblock_reserve and mem_reserve.
This fixes tinyconfig xtensa builds"
* tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
Pull NVMe fixes from Sagi.
* 'nvme-5.2-rc-next' of git://git.infradead.org/nvme:
nvme-rdma: use dynamic dma mapping per command
nvme: Fix u32 overflow in the number of namespace list calculation
nvmet: fix data_len to 0 for bdev-backed write_zeroes
nvme-tcp: fix queue mapping when queue count is limited
nvme-rdma: fix queue mapping when queue count is limited
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
-----BEGIN PGP SIGNATURE-----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=xcwx
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix kselftest-merge to find config fragments in deeper directories
- fix kconfig unit test, which was broken by SPDX tag addition
- add + prefix to buildtar to suppress jobserver unavailable warning
- fix checkstack.pl to recognize arch=arm64
- suppress noisy warning from cc-cross-prefix
* tag 'kbuild-fixes-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: use more portable 'command -v' for cc-cross-prefix
scripts/checkstack.pl: Fix arm64 wrong or unknown architecture
kbuild: tar-pkg: enable communication with jobserver
kconfig: tests: fix recursive inclusion unit test
kbuild: teach kselftest-merge to find nested config files
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the "restore"
kernel), because memory mapping differences between the restore and
image kernels cause SMT siblings to be woken up from idle states
and subsequently they try to fetch instructions from incorrect
memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=r5bv
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash during resume from hibernation introduced during the
4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code
to be built only if CONFIG_PM is set and add a few missing kerneldoc
comments.
Specifics:
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the
"restore" kernel), because memory mapping differences between the
restore and image kernels cause SMT siblings to be woken up from
idle states and subsequently they try to fetch instructions from
incorrect memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki)"
* tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
PM: sleep: Add kerneldoc comments to some functions
x86: intel_epb: Do not build when CONFIG_PM is unset
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
Fixes: 670f928ba0 ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
The usual driver bug fixes and fixes for a couple of regressions introduced in
5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also needs to
rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa drivers
- Fix the 32 bit compilation break
-----BEGIN PGP SIGNATURE-----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=RmxY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Things are looking pretty quiet here in RDMA, not too many bug fixes
rolling in right now. The usual driver bug fixes and fixes for a
couple of regressions introduced in 5.2:
- Fix a race on bootup with RDMA device renaming and srp. SRP also
needs to rename its internal sys files
- Fix a memory leak in hns
- Don't leak resources in efa on certain error unwinds
- Don't panic in certain error unwinds in ib_register_device
- Various small user visible bug fix patches for the hfi and efa
drivers
- Fix the 32 bit compilation break"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Remove MAYEXEC flag check from mmap flow
mlx5: avoid 64-bit division
IB/hfi1: Validate page aligned for a given virtual address
IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value
IB/hfi1: Insure freeze_work work_struct is canceled on shutdown
IB/rdmavt: Fix alloc_qpn() WARN_ON()
RDMA/core: Fix panic when port_data isn't initialized
RDMA/uverbs: Pass udata on uverbs error unwind
RDMA/core: Clear out the udata before error unwind
RDMA/hns: Fix PD memory leak for internal allocation
RDMA/srp: Rename SRP sysfs name after IB device rename trigger
- Fix boot crash on platforms with SVE2 due to missing register encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlz6QlIACgkQt6xw3ITB
YzQJRAf/e2PwVOHLwUIbPg//rKKNlJmBMnIUROEiAPjY7atTfjuYd3/65pIq7ZuO
RjMIUT1A2kg+pMOFzmXObLICq3Xl1/7LUUPIQ1iDvEeWIRb7HKQXoJkg9lvUEy89
T4sR1EBkK7uYh0w+/L7k1LESGgl4+VFY/ZY+4NmwsXEK4jfty3by7zE7Vy35MvQ6
XuEbYuMNjfskgBGbZPVqV8qHUlRurfhWWXjdgdAe9E7+fsHPuOrIr4+uXwAyVtRR
1/4tLySNW2GE8o0Ftun82ZasFTTgPc18ozASBYX1FMlQRaXznNREmSHYaIiartJE
VorEdRe25ztdI54fVM2dL0KKmTZi1g==
=ErME
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another round of mostly-benign fixes, the exception being a boot crash
on SVE2-capable CPUs (although I don't know where you'd find such a
thing, so maybe it's benign too).
We're in the process of resolving some big-endian ptrace breakage, so
I'll probably have some more for you next week.
Summary:
- Fix boot crash on platforms with SVE2 due to missing register
encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence gcc warnings about arch ABI drift
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
To print the pathname that will be used by shell in the current
environment, 'command -v' is a standardized way. [1]
'which' is also often used in scripts, but it is less portable.
When I worked on commit bd55f96fa9 ("kbuild: refactor cc-cross-prefix
implementation"), I was eager to use 'command -v' but it did not work.
(The reason is explained below.)
I kept 'which' as before but got rid of '> /dev/null 2>&1' as I
thought it was no longer needed. Sorry, I was wrong.
It works well on my Ubuntu machine, but Alexey Brodkin reports noisy
warnings on CentOS7 when 'which' fails to find the given command in
the PATH environment.
$ which foo
which: no foo in (/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin)
Given that behavior of 'which' depends on system (and it may not be
installed by default), I want to try 'command -v' once again.
The specification [1] clearly describes the behavior of 'command -v'
when the given command is not found:
Otherwise, no output shall be written and the exit status shall reflect
that the name was not found.
However, we need a little magic to use 'command -v' from Make.
$(shell ...) passes the argument to a subshell for execution, and
returns the standard output of the command.
Here is a trick. GNU Make may optimize this by executing the command
directly instead of forking a subshell, if no shell special characters
are found in the command and omitting the subshell will not change the
behavior.
In this case, no shell special character is used. So, Make will try
to run it directly. However, 'command' is a shell-builtin command,
then Make would fail to find it in the PATH environment:
$ make ARCH=m68k defconfig
make: command: Command not found
make: command: Command not found
make: command: Command not found
In fact, Make has a table of shell-builtin commands because it must
ask the shell to execute them.
Until recently, 'command' was missing in the table.
This issue was fixed by the following commit:
| commit 1af314465e5dfe3e8baa839a32a72e83c04f26ef
| Author: Paul Smith <psmith@gnu.org>
| Date: Sun Nov 12 18:10:28 2017 -0500
|
| * job.c: Add "command" as a known shell built-in.
|
| This is not a POSIX shell built-in but it's common in UNIX shells.
| Reported by Nick Bowler <nbowler@draconx.ca>.
Because the latest release is GNU Make 4.2.1 in 2016, this commit is
not included in any released versions. (But some distributions may
have back-ported it.)
We need to trick Make to spawn a subshell. There are various ways to
do so:
1) Use a shell special character '~' as dummy
$(shell : ~; command -v $(c)gcc)
2) Use a variable reference that always expands to the empty string
(suggested by David Laight)
$(shell command$${x:+} -v $(c)gcc)
3) Use redirect
$(shell command -v $(c)gcc 2>/dev/null)
I chose 3) to not confuse people. The stderr would not be polluted
anyway, but it will provide extra safety, and is easy to understand.
Tested on Make 3.81, 3.82, 4.0, 4.1, 4.2, 4.2.1
[1] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/command.html
Fixes: bd55f96fa9 ("kbuild: refactor cc-cross-prefix implementation")
Cc: linux-stable <stable@vger.kernel.org> # 5.1
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
Adjust conditions in on_stack function. That fixes backchain unwinder
which was unable to read pt_regs at the very bottom of the stack and
hence couldn't follow stacks (e.g. from async stack to a task stack).
Fixes: 78c98f9074 ("s390/unwind: introduce stack unwind API")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Many userspace tools and services use the proportional-share policy of
the blkio/io cgroups controller. The CFQ I/O scheduler implemented
this policy for the legacy block layer. To modify the weight of a
group in case CFQ was in charge, the 'weight' parameter of the group
must be modified. On the other hand, the BFQ I/O scheduler implements
the same policy in blk-mq, but, with BFQ, the parameter to modify has
a different name: bfq.weight (forced choice until legacy block was
present, because two different policies cannot share a common parameter
in cgroups).
Due to CFQ legacy, most if not all userspace configurations still use
the parameter 'weight', and for the moment do not seem likely to be
changed. But, when CFQ went away with legacy block, such a parameter
ceased to exist.
So, a simple workaround has been proposed [1] to make all
configurations work: add a symlink, named weight, to bfq.weight. This
commit adds such a symlink.
[1] https://lkml.org/lkml/2019/4/8/555
Suggested-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit enables a cftype to have a symlink (of any name) that
points to the file associated with the cftype.
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
" This is a bit more than I'd like to be pushing at this point in a
cycle, but it's a fairly important issue. There's been numerous
reports of more recent GP10[2467] boards failing to load, and I've
worked with NVIDIA FW engineers and tracked this down to the FW we've
been using not properly supporting the boards in question.
I've pushed an update to linux-firmware with the new FW version, which
unfortunately contains API changes vs the older firmware.
This series teaches the ACR subsystem inside nouveau enough to be able
to deal with supporting multiple incompatible FW revisions, and adds
support to the relevant chipsets for loading the newer FW revision, if
it's available."
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7pG+vur0Kn_TyU3ainnkvJVw07upnnaQNOToF+kzQtDQ@mail.gmail.com
Some newer boards with these chipsets aren't compatible with the prior
version of the SEC2 FW, and fail to load as a result.
This newer FW is actually the one we already use on >=GP108.
Unfortunately, there are interface differences in GP108's FW, making it
impossible to simply move files around in linux-firmware to solve this.
We need to be able to keep compatibility with all linux-firmware/kernel
combinations, which means supporting both firmwares.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's not enough to have per-falcon structures anymore, we have multiple
versions of some firmware now that have interface differences.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Will be passed to the FW loader function as an upper bound on the supported
FW version to attempt to load.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We have a need for this now with updated SEC2 LS FW images that have an
incompatible interface from the previous version.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In theory, IO scheduler belongs to request queue, and the request pool
of sched tags belongs to the request queue too.
However, the current tags allocation interfaces are re-used for both
driver tags and sched tags, and driver tags is definitely host wide,
and doesn't belong to any request queue, same with its request pool.
So we need tagset instance for freeing request of sched tags.
Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case
of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched
tags to be freed before calling blk_mq_free_tag_set().
Commit 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
moves blk_exit_queue into __blk_release_queue for simplying the fast
path in generic_make_request(), then causes oops during freeing requests
of sched tags in __blk_release_queue().
Fix the above issue by move freeing request pool of sched tags into
blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any
in-queue requests at that time. Freeing sched tags has to be kept in queue's
release handler becasue there might be un-completed dispatch activity
which might refer to sched tags.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull parisc fixes from Helge Deller:
- Fix crashes when accessing PCI devices on some machines like C240 and
J5000. The crashes were triggered because we replaced cache flushes
by nops in the alternative coding where we shouldn't for some
machines.
- Dave fixed a race in the usage of the sr1 space register when used to
load the coherence index.
- Use the hardware lpa instruction to to load the physical address of
kernel virtual addresses in the iommu driver code.
- The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve
that by rearranging functions in the final vmlinux executeable.
- Some defconfig cleanups and removal of compiler warnings.
* 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix crash due alternative coding for NP iopdir_fdc bit
parisc: Use lpa instruction to load physical addresses in driver code
parisc: configs: Remove useless UEVENT_HELPER_PATH
parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
parisc: Fix compiler warnings in float emulation code
parisc/slab: cleanup after /proc/slab_allocators removal
parisc: Allow building 64-bit kernel without -mlong-calls compiler option
parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
Pull crypto fixes from Herbert Xu:
"This fixes a regression that breaks the jitterentropy RNG and a
potential memory leak in hmac"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hmac - fix memory leak in hmac_init_tfm()
crypto: jitterentropy - change back to module_init()
Dan Williams
Linus Torvalds
Wolfram Sang
Robert Hancock
Jan Glauber
Andrey Konovalov
Jens Axboe
Jann Horn
Masahiro Yamada
Vasily Gorbik
Rafael J. Wysocki
Angelo Ruocco
Dave Airlie
Ben Skeggs
Ming Lei