We have a big rework of the kxsd9 driver queued up behind the fix below and
a fix for a recent fix that was marked for stable.
Hence this fix series is perhaps a little more urgent than average for IIO.
* core
- a fix for a fix in the last set. The recent fix for blocking ops when
! task running left a path (unlikely one) in which the function return
value was not set - so initialise it to 0.
- The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
fractions. Turned out a fix for this was in Analog's tree but hadn't made
it upstream.
* bmc150
- reset chip at init time. At least one board out there ends up coming up
in an unstable state due to noise during power up. The reset does no
harm on other boards.
* kxsd9
- Fix a bug in the reported scaling due to failing to set the integer
part to 0.
* hid-sensors-pressure
- Output was in the wrong units to comply with the IIO ABI.
* tools
- iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
out for having no trigger when we explicitly said we didn't want to have
one.
-----BEGIN PGP SIGNATURE-----
iQIuBAABCAAYBQJX0GOMERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaI2rwQ
AIA4M6uKqsdLLdmjT3bB1mGuXedGzwrvSObEvTGKEi/LDFreKsnqmjAlltuo7kwl
RxBXOOwb9Is3HccGEsFFWBNaMEKaW0ZoH9n0dn7VdlGThloKxE57S386GUGKT0Xq
tKNHbw7ITO+UIC1CvavmFsNk5Qe7AMiSNTnlBizcVrfdtbX91aqRe4X3fP8X1kFv
zcE/sbip9tjKwrXTsZ5/D4FCAtKjkamouv3tZHsp/qwhUQ9AJwklw0pySVgi+Ou1
3xzFwVATrH5bMK0JGwKts7zaMRvrbaf4CRdHhSLUXqmSYCYiN7THFnb/xD1nbFAy
AMsHDeXDs30cQD+Wiks9oNqf37EkcMBEsYpoFvoFE3xcVdX6NTs9ZRpGe+xizB1u
yI+Howt9sb4CcdPBtpPb3ffKK9X2ccPT+q1J8OpNlwZH/yta4wogFt8eKZlvdPtc
pHstwHUvv+s5EXYI8266DIkd9ErRI2+13v08rBwex1C8S0Xt5qQFOe/k7a5wzn2O
/DNUQ/mfOXJinxbt1aBakn2PFoMjyNWEXua7haW3pbr+fpUsZTN/MT57p2W3E4Ak
PfZxvHARW0MY3ShKpRmwzhrzmddGWZYb07xOtcoktHt2esV9MLUQLCUlDPaLk2H5
gUzvzEDQQJpyj+SmxAyEejeoZWMWIIW4dfoxBCU1iSF+
=Ob6a
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 4.8 cycle.
We have a big rework of the kxsd9 driver queued up behind the fix below and
a fix for a recent fix that was marked for stable.
Hence this fix series is perhaps a little more urgent than average for IIO.
* core
- a fix for a fix in the last set. The recent fix for blocking ops when
! task running left a path (unlikely one) in which the function return
value was not set - so initialise it to 0.
- The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
fractions. Turned out a fix for this was in Analog's tree but hadn't made
it upstream.
* bmc150
- reset chip at init time. At least one board out there ends up coming up
in an unstable state due to noise during power up. The reset does no
harm on other boards.
* kxsd9
- Fix a bug in the reported scaling due to failing to set the integer
part to 0.
* hid-sensors-pressure
- Output was in the wrong units to comply with the IIO ABI.
* tools
- iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
out for having no trigger when we explicitly said we didn't want to have
one.
Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in linux-next
with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iFYEABECABYFAlfK4HoPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspt0MAn0wC
dYhZOUHxOptLiEkVGXFCU9kzAJ4gETEbuGn9lgp2TFATOOAN7oqPUw==
=6MKk
-----END PGP SIGNATURE-----
Merge tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in
linux-next with no reported issues"
* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
arm: dts: rockchip: add reset node for the exist saradc SoCs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: accel: kxsd9: Fix raw read return
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
include/linux: fix excess fence.h kernel-doc notation
staging: wilc1000: correctly check if associatedsta has not been found
staging: wilc1000: NULL dereference on error
staging: wilc1000: txq_event: Fix coding error
MAINTAINERS: Add file patterns for ion device tree bindings
MAINTAINERS: Update maintainer entry for wilc1000
iio: chemical: atlas-ph-sensor: fix typo in val assignment
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: dt2811: fix a precedence bug
staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
...
Passing the trigger-less mode option on the command line causes
iio_generic_buffer to fail searching for an IIO trigger.
Fix this by skipping trigger initialization if trigger-less mode is
requested.
Technically it actually fixes:
7c7e9dad70 where the bug was introduced but as the window to the patch
below that changes the context was very small let's mark it with that.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Fixes: deb4d1fdcb ("iio: generic_buffer: Fix --trigger-num option")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull perf fixes from Thomas Gleixner:
"A few fixes from the perf departement
- prevent a imbalanced preemption disable in the events teardown code
- prevent out of bound acces in perf userspace
- make perf tools compile with UCLIBC again
- a fix for the userspace unwinder utility"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Use this_cpu_ptr() when stopping AUX events
perf evsel: Do not access outside hw cache name arrays
tools lib: Reinstate strlcpy() header guard with __UCLIBC__
perf unwind: Use addr_location::addr instead of ip for entries
This fixes a Kconfig issue with UM: when I made GPIOLIB
available to all archs, that included UM, but the OF part
of GPIOLIB requires HAS_IOMEM, so we add HAS_IOMEM as a
dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were
implicitly assuming OF_GPIO as their dependency but instead
depended on OF alone (the typical problem being a pointer
inside gpio_chip not existing unless OF_GPIO is selected)
and then UM would fail to compile with these drivers
instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is
certainly what they meant and the only thing that makes
sense anyway. GPIO with just OF but !OF_GPIO does not make
sense.
Also a fix for the max730x driver data pointer, and a minor
comment fix for the GPIO tools.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=isIb
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are a few GPIO fixes for v4.8.
I was expecting some fallout from the new chardev rework but nothing
like that turned up att all. Instead a Kconfig confusion that I think
I have finally nailed, then some ordinary driver noise and trivia.
This fixes a Kconfig issue with UM: when I made GPIOLIB available to
all archs, that included UM, but the OF part of GPIOLIB requires
HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were implicitly
assuming OF_GPIO as their dependency but instead depended on OF alone
(the typical problem being a pointer inside gpio_chip not existing
unless OF_GPIO is selected) and then UM would fail to compile with
these drivers instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is certainly what
they meant and the only thing that makes sense anyway. GPIO with just
OF but !OF_GPIO does not make sense.
Also a fix for the max730x driver data pointer, and a minor comment
fix for the GPIO tools"
* tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make any OF dependent driver depend on OF_GPIO
gpio: Fix OF build problem on UM
gpio: max730x: set gpiochip data pointer before using it
tools/gpio: fix gpio-event-mon header comment
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also start/stop filter related fixes, a perf
event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Check return value of the perf_event_read() IPI
perf/core: Enable mapping of the stop filters
perf/core: Update filters only on executable mmap
perf/core: Fix file name handling for start/stop filters
perf/core: Fix event_function_local()
uprobes: Fix the memcg accounting
perf intel-pt: Fix occasional decoding errors when tracing system-wide
tools: Sync kvm related header files for arm64 and s390
perf probe: Release resources on error when handling exit paths
perf probe: Check for dup and fdopen failures
perf symbols: Fix annotation of objects with debuginfo files
perf script: Don't disable use_callchain if input is pipe
perf script: Show proper message when failed list scripts
perf jitdump: Add the right header to get the major()/minor() definitions
perf ppc64le: Fix build failure when libelf is not present
perf tools mem: Fix -t store option for record command
perf intel-pt: Fix ip compression
We have to check if the values are >= *_MAX, not just >, fix it.
From the bugzilla report:
''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.
It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"
Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''
Committer note:
Testing it:
$ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
[ perf record: Woken up 16 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
$ perf evlist
L1-dcache-load-misses
L1-dcache-loads
L1-dcache-stores
L1-icache-load-misses
LLC-load-misses
LLC-loads
LLC-store-misses
LLC-stores
branch-load-misses
branch-loads
dTLB-load-misses
dTLB-loads
dTLB-store-misses
dTLB-stores
iTLB-load-misses
iTLB-loads
node-load-misses
node-loads
node-store-misses
node-stores
$ perf list cache
List of pre-defined events (to be used in -e):
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
node-store-misses [Hardware cache event]
node-stores [Hardware cache event]
$
Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools build in recent kernels spews splat when cross compiling with uClibc:
| CC util/alias.o
| In file included from tools/perf/util/../ui/../util/cache.h:8:0,
| from tools/perf/util/../ui/helpline.h:7,
| from tools/perf/util/debug.h:8,
| from arch/../util/cpumap.h:9,
| from arch/../util/env.h:5,
| from arch/common.h:4,
| from arch/common.c:3:
| tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls]
| extern size_t strlcpy(char *dest, const char *src, size_t size);
^
This is after commit 61a6445e46 ("tools lib: Guard the strlcpy() header with
__GLIBC__").
The problem is uClibc also defines __GLIBC__ for exported headers for
applications. So add that specific check to not trip for uClibc.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Gynther <pgynther@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-snps-arc@lists.infradead.org
Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Test fixes.
- A vsock fix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXsSOEAAoJECgfDbjSjVRpmCIIAKe6m+gWBiC4GJHJTYP5Q+lR
c6meEwxMBTZ+EVSeqUrAIN7slXu/w4NMVE/7IOo9Y+OUGK9MpQiRDOTzw2m3ps8d
W2gEJ+kvc7wFZZKXPkrgvzSuct0yv2Ho+lhZ9wpENU8KulyjBjAZ4xUDw/4LPM7G
nmE8GwOx625N4KCJh3dw5jZsgdyVWzqPuVYUqFctOWdDEqEs4f/Zb3kHR81DoMai
crri3p0fDOo+9zYPDTteG1ILayY6yIIFiPx8jrHTdL9DS+LcBHYJMXunu4Ensjth
9xdJeqWyb20DjSjzhrjwxS7Li4FJDiG5xYHNfuf2OQb+Or7ZvUGga1PbaNa7m6I=
=nlXU
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost fixes from Michael Tsirkin:
- test fixes
- a vsock fix
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: add dma stubs
vhost/test: fix after swiotlb changes
vhost/vsock: drop space available check for TX vq
ringtest: test build fix
- Fix occasional decoding errors when tracing system-wide with
Intel PT (Adrian Hunter)
- Fix ip compression in Intel PT for some specific packet types not
present on current hardware (Adrian Hunter)
- Fix annotation of objects with debuginfo files (Anton Blanchard)
- Fix build on Fedora Rawhide (25) wrt using the right header to
get the major() & minor() definitions in the jitdump code, now
it is deprecated getting those using sys/types.h, one has to use
sys/sysmacros.h (Arnaldo Carvalho de Melo)
- Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo)
- Check for dup and fdopen failures in 'perf probe' (Colin Ian King,
Arnaldo Carvalho de Melo)
- Fix showing callchains in pipe mode, i.e.
perf record -g -o - workload | perf script
now shows callchains (He Kuang)
- Show proper message when the scripts directory points to some
invalid location in 'perf script --list' (He Kuang)
- Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events
again (Jiri Olsa)
- Fix ppc64le build failure when libelf is not present (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=VI53
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-20160815' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix occasional decoding errors when tracing system-wide with
Intel PT (Adrian Hunter)
- Fix ip compression in Intel PT for some specific packet types not
present on current hardware (Adrian Hunter)
- Fix annotation of objects with debuginfo files (Anton Blanchard)
- Fix build on Fedora Rawhide (25) wrt using the right header to
get the major() & minor() definitions in the jitdump code, now
it is deprecated getting those using sys/types.h, one has to use
sys/sysmacros.h (Arnaldo Carvalho de Melo)
- Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo)
- Check for dup and fdopen failures in 'perf probe' (Colin Ian King,
Arnaldo Carvalho de Melo)
- Fix showing callchains in pipe mode, i.e.
perf record -g -o - workload | perf script
now shows callchains (He Kuang)
- Show proper message when the scripts directory points to some
invalid location in 'perf script --list' (He Kuang)
- Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events
again (Jiri Olsa)
- Fix ppc64le build failure when libelf is not present (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In order to successfully decode Intel PT traces, context switch events
are needed from the moment the trace starts. Currently that is ensured
by using the 'immediate' flag which enables the switch event when it is
opened.
However, since commit 86c2786994 ("perf intel-pt: Add support for
PERF_RECORD_SWITCH") that might not always happen. When tracing
system-wide the context switch event is added to the tracking event
which was not set as 'immediate'. Change that so it is.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 86c2786994 ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From a quick look nothing stands out as requiring changes to kvm tools
such as tools/perf/arch/s390/util/kvm-stat.c.
Silences these header checking warnings:
$ make -C tools/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: tools/arch/s390/include/uapi/asm/sie.h differs from kernel
Warning: tools/arch/arm64/include/uapi/asm/kvm.h differs from kernel
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-btutge414g516qmh6r5ienlj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zh2j4iqimralugke5qq7dn6d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dup and fdopen can potentially fail, so add some extra
error handling checks rather than assuming they always work.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1471038296-12956-1-git-send-email-colin.king@canonical.com
[ Free resources when those functions (now being verified) fail ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 73cdf0c6ea ("perf symbols: Record text offset in dso
to calculate objdump address") started storing the offset of
the text section for all DSOs:
if (elf_section_by_name(elf, &ehdr, &tshdr, ".text", NULL))
dso->text_offset = tshdr.sh_addr - tshdr.sh_offset;
Unfortunately this breaks debuginfo files, because we need to calculate
the offset of the text section in the associated executable file. As a
result perf annotate returns junk for all debuginfo files.
Fix this by using runtime_ss->elf which should point at the executable
when parsing a debuginfo file.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: 73cdf0c6ea ("perf symbols: Record text offset in dso to calculate objdump address")
Link: http://lkml.kernel.org/r/20160813115533.6de17912@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because perf data from pipe do not have a header with evsel attr, we
should not check that and disable symbol_conf.use_callchain. Otherwise,
perf script won't show callchains even if the data stream contains
callchain.
Before:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1828 182630.186578: 250000 cpu-clock: ..b9499 setup_arg_pages
uname 1828 182630.186850: 250000 cpu-clock: ..83b20 ___might_sleep
uname 1828 182630.187153: 250000 cpu-clock: ..4b6be file_map_prot_ch
...
After:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1833 182675.927099: 250000 cpu-clock:
ba5520 _raw_spin_lock+0xfe200040 ([kernel.kallsyms])
389dd4 expand_downwards+0xfe200154 ([kernel.kallsyms])
389f34 expand_stack+0xfe200024 ([kernel.kallsyms])
3b957e setup_arg_pages+0xfe20019e ([kernel.kallsyms])
40c80f load_elf_binary+0xfe20042f ([kernel.kallsyms])
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf shows the usage message when perf scripts folder failed to open,
which misleads users to let them think the command is being mistyped.
This patch shows a proper message and guides users to check the
PERF_EXEC_PATH environment variable in that case.
Before:
$ perf script --list
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-l, --list list available scripts
After:
$ perf script --list
open(/home/user/perf-core/scripts) failed.
Check for "PERF_EXEC_PATH" env to set scripts dir.
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed on Fedora Rawhide:
$ gcc --version
gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4)
$ rpm -q glibc
glibc-2.24.90-1.fc26.x86_64
$
CC /tmp/build/perf/util/jitdump.o
util/jitdump.c: In function 'jit_repipe_code_load':
util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
event->mmap2.maj = major(st.st_dev);
^~~~~
In file included from /usr/include/features.h:397:0,
from /usr/include/sys/types.h:25,
from util/jitdump.c:1:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
Fix it following that recomendation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uninitialized channel pointer causes segmentation fault when we
call free(channel) during cleanup() with no channels initialized.
This happens when you exit early for usage errors. Initialize
the pointer to NULL when it is declared.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Tested-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Recent changes to ptr_ring broke the ringtest
which lacks a likely() stub. Fix it up.
Fixes: 982fb490c2
("ptr_ring: support zero length ring")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
Pull libnvdimm fixes from Dan Williams:
- Fix for the nd_blk (NVDIMM Block Window Aperture) driver.
A spec clarification requires the driver to mask off reserved bits in
status register. This is tagged for -stable back to the v4.2 kernel.
- Fix for a kernel crash in the nvdimm unit tests when module loading
is interrupted with SIGTERM. Tagged for -stable since validation
efforts external to Intel use the unit tests for qualifying
backports.
- Add a new 'size' sysfs attribute for the BTT (NVDIMM Block
Translation Table) driver to make it symmetric with the other
namespace personality drivers (PFN and DAX) that provide a size
attribute for indicating how much namespace capacity is lost to
metadata.
The BTT change arrived at the start of the merge window and has
appeared in a -next release. It can technically wait for 4.9, but it
is small, fixes asymmetry in the libnvdimm-sysfs interface, and
something I would have squeezed into the v4.8 pull request had it
arrived a few days earlier.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
nvdimm, btt: add a size attribute for BTTs
libnvdimm, nd_blk: mask off reserved status bits
arch__post_process_probe_trace_events() calls get_target_map() to
prepare symbol table. get_target_map() is defined inside
util/probe-event.c.
probe-event.c will only get included in perf binary if CONFIG_LIBELF is
set. Hence arch__post_process_probe_trace_events() needs to be defined
inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com
[ Thunderbird MUA mangled it, fix that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael reported 'perf mem -t store record' being broken. The reason is
latest rework of this area:
commit acbe613e0c ("perf tools: Add monitored events array")
We don't mark perf_mem_events store record when -t store option is
specified.
Committer notes:
Before:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cycles:ppp
#
After:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cpu/mem-stores/P
#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: acbe613e0c ("perf tools: Add monitored events array")
Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer
to section 36.4.2.2 Target IP (TIP) Packet - IP Compression.
Existing Intel PT packet decoder did not support type 4, and got type 6
wrong. Because type 3 and type 4 have the same number of bytes, the
packet 'count' has been changed from being the number of ip bytes to
being the type code. That allows the Intel PT decoder to correctly
decide whether to sign-extend or use the last ip. However that also
meant the code had to be adjusted in a number of places.
Currently hardware is not using the new compression types, so this fix
has no effect on existing hardware.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The unit tests crash when hotplug races the previous probe. This race
requires that the loading of the nfit_test module be terminated with
SIGTERM, and the module to be unloaded while the ars scan is still
running.
In contrast to the normal nfit driver, the unit test calls
acpi_nfit_init() twice to simulate hotplug, whereas the nominal case
goes through the acpi_nfit_notify() event handler. The
acpi_nfit_notify() path is careful to flush the previous region
registration before servicing the hotplug event. The unit test was
missing this guarantee.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170
[..]
Call Trace:
[<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0
[<ffffffff810ce490>] process_one_work+0x2d0/0x680
[<ffffffff810ce331>] ? process_one_work+0x171/0x680
[<ffffffff810ce88e>] worker_thread+0x4e/0x480
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810d5343>] kthread+0xf3/0x110
[<ffffffff8199846f>] ret_from_fork+0x1f/0x40
[<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We have some tests that assume we're using std=gnu99, which is fine on
most compilers, but some old compilers use a different default.
So make it explicit that we want to use std=gnu99.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User visible fixes:
- Fix the lookup for a kernel module in 'perf probe', fixing for instance, the
erroneous return of "[raid10]" when looking for "[raid1]" (Konstantin Khlebnikov)
- Disable counters in a group before reading them in 'perf stat', to avoid skew (Mark Rutland)
- Fix adding probes to function aliases in systems using kaslr (Masami Hiramatsu)
- Trip libtraceevent trace_seq buffers, removing unnecessary memory usage that could
bring a system using tracepoint events with 'perf top' to a crawl, as the trace_seq
buffers start at a whooping 4 KB, which is very rarely used in perf's usecases,
so realloc it to the really used space as a last measure after using libtraceevent
functions to format the fields of tracepoint events (Arnaldo Carvalho de Melo)
- Fix 'perf probe' location when using DWARF on ppc64le (Ravi Bangoria)
Improvement:
- Allow specifying signedness casts to a 'perf probe' variable, to shorten
the number of steps to see signed values that otherwise would always appear
as hex values (Naohiro Aota)
Documentation fixes:
- Add 'bpf-output' field to 'perf script' usage message (Brendan Gregg)
Infrastructure fixes:
- Sync kernel header files: cpufeatures.h, {disabled,required}-features.h,
bpf.h and vmx.h, so that we get a clean build, without warnings about files
being different from the kernel counterparts.
A verification of the need or desirability of changes in tools/ based on what
was done in the kernel changesets was made and documented in the respective
file sync changesets (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/B7T
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-20160809' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible fixes:
- Fix the lookup for a kernel module in 'perf probe', fixing for instance, the
erroneous return of "[raid10]" when looking for "[raid1]" (Konstantin Khlebnikov)
- Disable counters in a group before reading them in 'perf stat', to avoid skew (Mark Rutland)
- Fix adding probes to function aliases in systems using kaslr (Masami Hiramatsu)
- Trip libtraceevent trace_seq buffers, removing unnecessary memory usage that could
bring a system using tracepoint events with 'perf top' to a crawl, as the trace_seq
buffers start at a whooping 4 KB, which is very rarely used in perf's usecases,
so realloc it to the really used space as a last measure after using libtraceevent
functions to format the fields of tracepoint events (Arnaldo Carvalho de Melo)
- Fix 'perf probe' location when using DWARF on ppc64le (Ravi Bangoria)
- Allow specifying signedness casts to a 'perf probe' variable, to shorten
the number of steps to see signed values that otherwise would always appear
as hex values (Naohiro Aota)
Documentation fixes:
- Add 'bpf-output' field to 'perf script' usage message (Brendan Gregg)
Infrastructure fixes:
- Sync kernel header files: cpufeatures.h, {disabled,required}-features.h,
bpf.h and vmx.h, so that we get a clean build, without warnings about files
being different from the kernel counterparts.
A verification of the need or desirability of changes in tools/ based on what
was done in the kernel changesets was made and documented in the respective
file sync changesets (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Powerpc has Global Entry Point and Local Entry Point for functions. LEP
catches call from both the GEP and the LEP. Symbol table of ELF contains
GEP and Offset from which we can calculate LEP, but debuginfo does not
have LEP info.
Currently, perf prioritize symbol table over dwarf to probe on LEP for
ppc64le. But when user tries to probe with function parameter, we fall
back to using dwarf(i.e. GEP) and when function called via LEP, probe
will never hit.
For example:
$ objdump -d vmlinux
...
do_sys_open():
c0000000002eb4a0: e8 00 4c 3c addis r2,r12,232
c0000000002eb4a4: 60 00 42 38 addi r2,r2,96
c0000000002eb4a8: a6 02 08 7c mflr r0
c0000000002eb4ac: d0 ff 41 fb std r26,-48(r1)
$ sudo ./perf probe do_sys_open
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060896 filename_string=+0(%gpr4):string
For second case, perf probed on GEP. So when function will be called via
LEP, probe won't hit.
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB perf.data ]
To resolve this issue, let's not prioritize symbol table, let perf
decide what it wants to use. Perf is already converting GEP to LEP when
it uses symbol table. When perf uses debuginfo, let it find LEP offset
form symbol table. This way we fall back to probe on LEP for all cases.
After patch:
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904 filename_string=+0(%gpr4):string
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (11 samples) ]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of inline code, introduce function to post process kernel
probe trace events.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Due to:
1e61f78baf ("x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated")
No changes to tools using those headers (tools/arch/x86/lib/mem{set,cpu}_64.S)
seems necessary.
Detected by the tools build header drift checker:
$ make -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
GEN /tmp/build/perf/common-cmds.h
Warning: tools/arch/x86/include/asm/disabled-features.h differs from kernel
Warning: tools/arch/x86/include/asm/required-features.h differs from kernel
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
CC /tmp/build/perf/util/probe-finder.o
CC /tmp/build/perf/builtin-help.o
<SNIP>
^C$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ja75m7zk8j0jkzmrv16i5ehw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The way we're using kernel headers in tools/ now, with a copy that is
made to the same path prefixed by "tools/" plus checking if that copy
got stale, i.e. if the kernel counterpart changed, helps in keeping
track with new features that may be useful for tools to exploit.
For instance, looking at all the changes to bpf.h since it was last
copied to tools/include brings this to toolers' attention:
Need to investigate this one to check how to run a program via perf, setting up
a BPF event, that will take advantage of the way perf already calls clang/LLVM,
sets up the event and runs the workload in a single command line, helping in
debugging such semi cooperative programs:
96ae522795 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
This one needs further investigation about using the feature it improves
in 'perf trace' to do some tcpdumpin' mixed with syscalls, tracepoints,
probe points, callgraphs, etc:
555c8a8623 ("bpf: avoid stack copy and use skb ctx for event output")
Add tracing just packets that are related to some container to that mix:
4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
4ed8ec521e ("cgroup: bpf: Add BPF_MAP_TYPE_CGROUP_ARRAY")
Definetely needs to have example programs accessing task_struct from a bpf proggie
started from 'perf trace':
606274c5ab ("bpf: introduce bpf_get_current_task() helper")
Core networking related, XDP:
6ce96ca348 ("bpf: add XDP_TX xdp_action for direct forwarding")
6a773a15a1 ("bpf: add XDP prog type for early driver filter")
13c5c240f7 ("bpf: add bpf_get_hash_recalc helper")
d2485c4242 ("bpf: add bpf_skb_change_type helper")
6578171a7f ("bpf: add bpf_skb_change_proto helper")
Changes detected by the tools build system:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
INSTALL GTK UI
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-difq4ts1xvww6eyfs9e7zlft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There were changes related to the deprecation of the "pcommit"
instruction:
fd1d961dd6 ("x86/insn: remove pcommit")
dfa169bbee ("Revert "KVM: x86: add pcommit support"")
No need to update anything in the tools, as "pcommit" wasn't being
listed on the VMX_EXIT_REASONS in the tools/perf/arch/x86/util/kvm-stat.c
file.
Just grab fresh copies of these files to silence the file cache
coherency detector:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: tools/arch/x86/include/uapi/asm/vmx.h differs from kernel
INSTALL GTK UI
<SNIP>
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-07pmcc1ysydhyyxbmp1vt0l4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf probe' tool detects a variable's type and use the detected
type to add a new probe. Then, kprobes prints its variable in
hexadecimal format if the variable is unsigned and prints in decimal if
it is signed.
We sometimes want to see unsigned variable in decimal format (i.e.
sector_t or size_t). In that case, we need to investigate the variable's
size manually to specify just signedness.
This patch add signedness casting support. By specifying "s" or "u" as a
type, perf-probe will investigate variable size as usual and use the
specified signedness.
E.g. without this:
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9692 [003] d..1 971.096633: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d00
dbench-9692 [003] d..1 971.096685: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x1a3d80
dbench-9692 [003] d..1 971.096687: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d80
...
// need to investigate the variable size
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector:s64'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s64)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
With this:
// just use "s" to cast its signedness
$ perf probe -v -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9689 [001] d..1 1212.391237: submit_bio: (submit_bio+0x0/0x140) bi_sector=128
dbench-9689 [001] d..1 1212.391252: submit_bio: (submit_bio+0x0/0x140) bi_sector=131072
dbench-9697 [006] d..1 1212.398611: submit_bio: (submit_bio+0x0/0x140) bi_sector=30208
This commit also update perf-probe.txt to describe "types". Most parts
are based on existing documentation: Documentation/trace/kprobetrace.txt
Committer note:
Testing using 'perf trace':
# perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=0xc133c0)
3181.861 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffb8)
3181.881 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc0)
3184.488 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc8)
<SNIP>
4717.927 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7a88)
4717.970 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7880)
^C[root@jouet ~]#
Now, using this new feature:
[root@jouet ~]# perf probe -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
[root@jouet ~]# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145704)
0.017 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145712)
0.019 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145720)
2.567 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145728)
5631.919 probe:submit_bio:(ffffffffac3aee00) bi_sector=0)
5631.941 probe:submit_bio:(ffffffffac3aee00) bi_sector=8)
5631.945 probe:submit_bio:(ffffffffac3aee00) bi_sector=16)
5631.948 probe:submit_bio:(ffffffffac3aee00) bi_sector=24)
^C#
With callchains:
# trace --no-syscalls --ev probe:submit_bio/max-stack=10/
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662544)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.023 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662552)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.027 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662560)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
2.593 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662568)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
journal_submit_commit_record+0xa82001ac ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa82012e8 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
^C#
Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470710408-23515-1-git-send-email-naohiro.aota@hgst.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we don't have a tracee (i.e. we're attaching to a task or CPU),
counters can still be running after our workload finishes, and can still
be running as we read their values. As we read events one-by-one, there
can be arbitrary skew between values of events, even within a group.
This means that ratios within an event group are not reliable.
This skew can be seen if measuring a group of identical events, e.g:
# perf stat -a -C0 -e '{cycles,cycles}' sleep 1
To avoid this, we must stop groups from counting before we read the
values of any constituent events. This patch adds and makes use of a new
disable_counters() helper, which disables group leaders (and thus each
group as a whole). This mirrors the use of enable_counters() for
starting event groups in the absence of a tracee.
Closing a group leader splits the group, and without a disabled group
leader the newly split events will begin counting. Thus to ensure counts
are reliable we must defer closing group leaders until all counts have
been read. To do so this patch removes the event closing logic from the
read_counters() helper, explicitly closes the events using
perf_evlist__close(), which also aids legibility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1470747869-3567-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If module is "module" then dso->short_name is "[module]". Substring
comparing is't enough: "raid10" matches to "[raid1]". This patch also
checks terminating zero in module name.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/147039975648.715620.12985971832789032159.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adjust map->reloc offset for the unmapped address when finding
alternative symbol address from map, because KASLR can relocate the
kernel symbol address.
The same adjustment has been done when finding appropriate kernel symbol
address from map which was introduced by commit f90acac757 ("perf
probe: Find given address from offline dwarf")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160806192948.e366f3fbc4b194de600f8326@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use libtraceevent to format trace event fields into printable
strings to use in hist entries it is important to trim it from the
default 4 KiB it starts with to what is really used, to reduce the
memory footprint, so use realloc(seq.buffer, seq.len + 1) when returning
the seq.buffer formatted with the fields contents.
Reported-and-Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-t3hl7uxmilrkigzmc90rlhk2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the 'bpf-output' field to the perf script usage message, and docs.
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470192469-11910-4-git-send-email-bgregg@netflix.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ntb_perf and ntb_pingpong for increased debugability. Also,
modification to the ntb_transport layer to increase/decrease the number
of transport entries depending on the ring size.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wfUq
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.8' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"NTB bug fixes for the ntb_tool and ntb_perf, and improvements to the
ntb_perf and ntb_pingpong for increased debugability.
Also, modification to the ntb_transport layer to increase/decrease
the number of transport entries depending on the ring size"
* tag 'ntb-4.8' of git://github.com/jonmason/ntb:
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
ntb_tool: Add memory window debug support
ntb_perf: Allow limiting the size of the memory windows
NTB: allocate number transport entries depending on size of ring size
ntb_tool: BUG: Ensure the buffer size is large enough to return all spads
ntb_tool: Fix infinite loop bug when writing spad/peer_spad file
This script automates testing doorbells, scratchpads and memory windows
for an NTB device. It can be run locally, with the NTB looped
back to the same host or use SSH to remotely control the second host.
In the single host case, the script just needs to be passed two
arguments: a PCI ID for each side of the link. In the two host case
the -r option must be used to specify the remote hostname (which must
be SSH accessible and should probably have ssh-keys exchanged).
A sample run looks like this:
$ sudo ./ntb_test.sh 0000:03:00.1 0000:83:00.1 -p 29
Starting ntb_tool tests...
Running link tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Running link tests on: 0000:83:00.1 / 0000:03:00.1
Passed
Running db tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Running db tests on: 0000:83:00.1 / 0000:03:00.1
Passed
Running spad tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Running spad tests on: 0000:83:00.1 / 0000:03:00.1
Passed
Running mw0 tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Running mw0 tests on: 0000:83:00.1 / 0000:03:00.1
Passed
Running mw1 tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Running mw1 tests on: 0000:83:00.1 / 0000:03:00.1
Passed
Starting ntb_pingpong tests...
Running ping pong tests on: 0000:03:00.1 / 0000:83:00.1
Passed
Starting ntb_perf tests...
Running local perf test without DMA
0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s
Passed
Running remote perf test without DMA
0: copied 536870912 bytes in 164453 usecs, 3264 MBytes/s
Passed
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup rtc-cmos,
rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after shutdown for QNAP
TS-41x
- s3c: clock fixes
-----BEGIN PGP SIGNATURE-----
iQIcBAABCgAGBQJXokhIAAoJENiigzvaE+LCZqQP+wWzintN/N1u3dKiVB7iSdwq
+S/jAXD9wW8OK9PI60/YUGRYeUXmZW9t4XYg1VKCxU9KpVC17LgOtDyXD8BufP1V
uREJEzZw9O7zCCjeHp/ICFjBkc62Net6ZDOO+ZyXPNfddpS1Xq1uUgXLZc/202UR
ID/kewu0pJRDnoxyqznWn9+8D33w/ygXs2slY2Ive0ONtjdgxGcsj2rNbb2RYn2z
OP7br3lLg7qkFh4TtXb61eh/9GYIk6wzP/CrX5l/jH4SjQnrIk5g/X/Cd1qQ/qso
JZzFoonOKvIp5Gw/+fZ9NP3YFcnkoRMv4NjZV8PAmsYLds+ibRiBcoB8u6FmiJV7
WW5uopgPkfCGN5BV3+QHwJDVe+WlgnlzaT5zPUCcP5KWusDts4fWIgzP7vrtAzf4
3OJLrgSGdBeOqWnJD21nxKUD27JOseX7D+BFtwxR4lMsXHqlHJfETpZ8gts1ZGH3
2U353j/jkZvGWmc6dMcuxOXT2K4VqpYeIIqs0IcLu6hM9crtR89zPR2Iu1AilfDW
h2NroF+Q//SgMMzWoTEG6Tn7RAc7MthgA/tRCFZF9CBMzNs988w0CTHnKsIHmjpU
UKkMeJGAC9YrPYIcqrg0oYsmLUWXc8JuZbGJBnei3BzbaMTlcwIN9qj36zfq6xWc
TMLpbWEoIsgFIZMP/hAP
=rpGB
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"RTC for 4.8
Cleanups:
- huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
- move mn10300 to rtc-cmos
Subsystem:
- fix wakealarms after hibernate
- multiples fixes for rctest
- simplify implementations of .read_alarm
New drivers:
- Maxim MAX6916
Drivers:
- ds1307: fix weekday
- m41t80: add wakeup support
- pcf85063: add support for PCF85063A variant
- rv8803: extend i2c fix and other fixes
- s35390a: fix alarm reading, this fixes instant reboot after
shutdown for QNAP TS-41x
- s3c: clock fixes"
* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
rtc: rv8803: Clear V1F when setting the time
rtc: rv8803: Stop the clock while setting the time
rtc: rv8803: Always apply the I²C workaround
rtc: rv8803: Fix read day of week
rtc: rv8803: Remove the check for valid time
rtc: rv8803: Kconfig: Indicate rx8900 support
rtc: asm9260: remove .owner field for driver
rtc: at91sam9: Fix missing spin_lock_init()
rtc: m41t80: add suspend handlers for alarm IRQ
rtc: m41t80: make it a real error message
rtc: pcf85063: Add support for the PCF85063A device
rtc: pcf85063: fix year range
rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
rtc: s3c: Remove unnecessary call to disable already disabled clock
rtc: abx80x: use devm_add_action_or_reset()
rtc: m41t80: use devm_add_action_or_reset()
rtc: fix a typo and reduce three empty lines to one
rtc: s35390a: improve two comments in .set_alarm
...
New features:
- Add --sample-cpu to 'perf record', to explicitely ask for sampling
the CPU (Jiri Olsa)
Fixes:
- Fix processing of multi byte chunks in objdump output, fixing
disassemble processing for annotation on at least ARM64 (Jan Stancek)
- Use SyS_epoll_wait in a BPF 'perf test' entry instead of sys_epoll_wait, that
is not present in the DWARF info in vmlinux files (Arnaldo Carvalho de Melo)
- Add -wno-shadow when processing files using perl headers, fixing
the build on Fedora Rawhide and Arch Linux (Namhyung Kim)
Infrastructure:
- Annotate prep work to better catch and report errors related to
using objdump to disassemble DSOs (Arnaldo Carvalho de Melo)
- Add 'alloc', 'scnprintf' and 'and' methods for bitmap processing (Jiri Olsa)
- Add nested output resorting callback in hists processing (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uPmA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160803' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add --sample-cpu to 'perf record', to explicitely ask for sampling
the CPU (Jiri Olsa)
Fixes:
- Fix processing of multi byte chunks in objdump output, fixing
disassemble processing for annotation on at least ARM64 (Jan Stancek)
- Use SyS_epoll_wait in a BPF 'perf test' entry instead of sys_epoll_wait, that
is not present in the DWARF info in vmlinux files (Arnaldo Carvalho de Melo)
- Add -wno-shadow when processing files using perl headers, fixing
the build on Fedora Rawhide and Arch Linux (Namhyung Kim)
Infrastructure changes:
- Annotate prep work to better catch and report errors related to
using objdump to disassemble DSOs (Arnaldo Carvalho de Melo)
- Add 'alloc', 'scnprintf' and 'and' methods for bitmap processing (Jiri Olsa)
- Add nested output resorting callback in hists processing (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Something made the sys_epoll_wait() function alias not to be found in
the vmlinux DWARF info, being found only in /proc/kallsyms, which made
the BPF perf tests to fail:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : FAILED!
37.2: Test BPF prologue generation : Skip
37.3: Test BPF relocation checker : Skip
[root@jouet ~]#
Using -v we can see it is failing to find DWARF info for the probed function,
sys_epoll_wait, which we can find in /proc/kallsyms but not in vmlinux with
CONFIG_DEBUG_INFO:
[root@jouet ~]# grep -w sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
[root@jouet ~]# readelf -wi /lib/modules/4.7.0+/build/vmlinux | grep -w sys_epoll_wait
[root@jouet ~]#
If we try to use perf probe:
[root@jouet ~]# perf probe sys_epoll_wait
Failed to find debug information for address ffffffffbd295b50
Probe point 'sys_epoll_wait' not found.
Error: Failed to add events.
[root@jouet ~]#
It all works if we use SyS_epoll_wait, that is just an alias to the probed
function:
[root@jouet ~]# grep -i sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T SyS_epoll_wait
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
So use it:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : Ok
[root@jouet ~]#
Further info:
[root@jouet ~]# gcc --version
gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3)
[acme@jouet linux]$ cat /etc/fedora-release
Fedora release 24 (Twenty Four)
Investigation as to why it fails is still underway, but it was always
going from sys_epoll_wait to SyS_epoll_wait when looking up the DWARF
info in vmlinux, and this is what is breaking now.
Switching to use SyS_epoll_wait allows this test to proceed and test the
BPF code it was designed for, so lets have this in to allow passing this
test while we fix the root cause.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7hekjp0bodwjbb419sl2b55h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Apparently, the tools/testing version dates to a few flags ago, and
we've sprouted 4 new ones since. Keep in sync with the value in the
main tree...
Link: http://lkml.kernel.org/r/23400.1469702675@turing-police.cc.vt.edu
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
objdump's raw insn output can vary across architectures on the number of
bytes per chunk (bpc) displayed and their endianness.
The code-reading test relied on reading objdump output as 1 bpc. Kaixu
Xia reported test failure on ARM64, where objdump displays 4 bpc:
70c48: f90027bf str xzr, [x29,#72]
70c4c: 91224000 add x0, x0, #0x890
70c50: f90023a0 str x0, [x29,#64]
This patch adds support to read raw insn output for any bpc length.
In case of 2+ bpc it also guesses objdump's display endian.
Reported-and-Tested-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/07f0f7bcbda78deb423298708ef9b6a54d6b92bd.1452592712.git.jstancek@redhat.com
[ Fix up pr_fmt() call to use %zd for size_t variables, fixing the build on Ubuntu cross-compiling to armhf and ppc64 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Greg Kroah-Hartman
Linus Torvalds
Gregor Boirie
Arnaldo Carvalho de Melo
Vineet Gupta
Milian Wolff
Ingo Molnar
Adrian Hunter
Colin Ian King
Anton Blanchard
He Kuang
Alison Schofield
Michael S. Tsirkin
Ravi Bangoria
Jiri Olsa
Dan Williams
Michael Ellerman
Naohiro Aota
Mark Rutland
Konstantin Khlebnikov
Masami Hiramatsu
Brendan Gregg
Baruch Siach
Logan Gunthorpe
Valdis Kletnieks
Jan Stancek