When arch_stack_walk_user() is called from atomic contexts, access_ok() can
trigger the following warning if compiled with CONFIG_DEBUG_ATOMIC_SLEEP=y.
Reproducer:
// CONFIG_DEBUG_ATOMIC_SLEEP=y
# cd /sys/kernel/debug/tracing
# echo 1 > options/userstacktrace
# echo 1 > events/irq/irq_handler_entry/enable
WARNING: CPU: 0 PID: 2649 at arch/x86/kernel/stacktrace.c:103 arch_stack_walk_user+0x6e/0xf6
CPU: 0 PID: 2649 Comm: bash Not tainted 5.3.0-rc1+ #99
RIP: 0010:arch_stack_walk_user+0x6e/0xf6
Call Trace:
<IRQ>
stack_trace_save_user+0x10a/0x16d
trace_buffer_unlock_commit_regs+0x185/0x240
trace_event_buffer_commit+0xec/0x330
trace_event_raw_event_irq_handler_entry+0x159/0x1e0
__handle_irq_event_percpu+0x22d/0x440
handle_irq_event_percpu+0x70/0x100
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x12f/0x3f0
handle_irq+0x34/0x40
do_IRQ+0xa6/0x1f0
common_interrupt+0xf/0xf
</IRQ>
Fix it by calling __range_not_ok() directly instead of access_ok() as
copy_from_user_nmi() does. This is fine here because the actual copy is
inside a pagefault disabled region.
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190722083216.16192-2-devel@etsukata.com
On x86-32 with PTI enabled, parts of the kernel page-tables are not shared
between processes. This can cause mappings in the vmalloc/ioremap area to
persist in some page-tables after the region is unmapped and released.
When the region is re-used the processes with the old mappings do not fault
in the new mappings but still access the old ones.
This causes undefined behavior, in reality often data corruption, kernel
oopses and panics and even spontaneous reboots.
Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to
all page-tables in the system before the regions can be re-used.
References: https://bugzilla.suse.com/show_bug.cgi?id=1118689
Fixes: 5d72b4fba4 ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.org
With huge-page ioremap areas the unmappings also need to be synced between
all page-tables. Otherwise it can cause data corruption when a region is
unmapped and later re-used.
Make the vmalloc_sync_one() function ready to sync unmappings and make sure
vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD
is found.
Fixes: 5d72b4fba4 ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-3-joro@8bytes.org
Do not require a struct page for the mapped memory location because it
might not exist. This can happen when an ioremapped region is mapped with
2MB pages.
Fixes: 5d72b4fba4 ('x86, mm: support huge I/O mapping capability I/F')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20190719184652.11391-2-joro@8bytes.org
A few boards set clock frequency of their I2C buses with
"clock_frequency" property. The right property is "clock-frequency".
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
fw_{grow,map}_paged_buf() need to be defined as static inline
when CONFIG_FW_LOADER_PAGED_BUF is not enabled,
infact fw_free_paged_buf() is also defined as static inline
when CONFIG_FW_LOADER_PAGED_BUF is not enabled.
Fixes the following mutiple definition building errors for Android kernel:
drivers/base/firmware_loader/fallback_efi.o: In function `fw_grow_paged_buf':
fallback_efi.c:(.text+0x0): multiple definition of `fw_grow_paged_buf'
drivers/base/firmware_loader/main.o:(.text+0x73b): first defined here
drivers/base/firmware_loader/fallback_efi.o: In function `fw_map_paged_buf':
fallback_efi.c:(.text+0xf): multiple definition of `fw_map_paged_buf'
drivers/base/firmware_loader/main.o:(.text+0x74a): first defined here
[ slightly corrected the patch description -- tiwai ]
Fixes: 5342e7093f ("firmware: Factor out the paged buffer handling code")
Fixes: 82fd7a8142 ("firmware: Add support for loading compressed files")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190722055536.15342-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We are using PAGE_SIZE as the unit to determine if the total len in
async_list has exceeded max_pages, it's not fair for smaller io sizes.
For example, if we are doing 1k-size io streams, we will never exceed
max_pages since len >>= PAGE_SHIFT always gets zero. So use original
bytes to make it more accurate.
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hrvoje reports that when a large fixed buffer is registered and IO is
being done to the latter pages of said buffer, the IO submission time
is much worse:
reading to the start of the buffer: 11238 ns
reading to the end of the buffer: 1039879 ns
In fact, it's worse by two orders of magnitude. The reason for that is
how io_uring figures out how to setup the iov_iter. We point the iter
at the first bvec, and then use iov_iter_advance() to fast-forward to
the offset within that buffer we need.
However, that is abysmally slow, as it entails iterating the bvecs
that we setup as part of buffer registration. There's really no need
to use this generic helper, as we know it's a BVEC type iterator, and
we also know that each bvec is PAGE_SIZE in size, apart from possibly
the first and last. Hence we can just use a shift on the offset to
find the right index, and then adjust the iov_iter appropriately.
After this fix, the timings are:
reading to the start of the buffer: 10135 ns
reading to the end of the buffer: 1377 ns
Or about an 755x improvement for the tail page.
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A caller is supposed to pass in REQ_NOWAIT if we can't block for any
given operation, but O_DIRECT for block devices just ignore this. Hence
we'll block for various resource shortages on the block layer side,
like having to wait for requests.
Use the new REQ_NOWAIT_INLINE to ask for this error to be returned
inline, so we can handle it appropriately and return -EAGAIN to the
caller.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default, if a caller sets REQ_NOWAIT and we need to block, we'll
return -EAGAIN through the bio->bi_end_io() callback. For some use
cases, this makes it hard to use.
Allow a caller to ask for inline return of errors related to
blocking by also setting REQ_NOWAIT_INLINE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some applications set tiny SO_SNDBUF values and expect
TCP to just work. Recent patches to address CVE-2019-11478
broke them in case of losses, since retransmits might
be prevented.
We should allow these flows to make progress.
This patch allows the first and last skb in retransmit queue
to be split even if memory limits are hit.
It also adds the some room due to the fact that tcp_sendmsg()
and tcp_sendpage() might overshoot sk_wmem_queued by about one full
TSO skb (64KB size). Note this allowance was already present
in stable backports for kernels < 4.15
Note for < 4.15 backports :
tcp_rtx_queue_tail() will probably look like :
static inline struct sk_buff *tcp_rtx_queue_tail(const struct sock *sk)
{
struct sk_buff *skb = tcp_send_head(sk);
return skb ? tcp_write_queue_prev(sk, skb) : tcp_write_queue_tail(sk);
}
Fixes: f070ef2ac6 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Andrew Prout <aprout@ll.mit.edu>
Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jonathan Looney <jtl@netflix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is an extra rcu_read_unlock left in netvsc_recv_callback(),
after a previous patch that removes RCU from this function.
This patch removes the extra RCU unlock.
Fixes: 345ac08990 ("hv_netvsc: pass netvsc_device to receive callback")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:
Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
Oops: Unrecoverable exception, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69
NIP: c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
REGS: c00000003fffbd70 TRAP: 0700 Not tainted (5.2.0-11045-g7142b497d8)
MSR: 8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]> CR: 42004242 XER: 00000000
CFAR: c0000000000022e0 IRQMASK: 0
GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
LR [00007fffb2d67e48] 0x7fffb2d67e48
Call Trace:
Instruction dump:
e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18
The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.
This means any local user can crash the system.
Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.
Found with sigfuz kernel selftest on P9.
This fixes CVE-2019-13648.
Fixes: 2b0a576d15 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
Commit ceb02dcf67 ARM: delete netx machine deleted
the mach-netx machine. Then eight days later
it was resurrected by SPDX tag fixes. I think.
Taking the liberty to fix some additional debug uart
cruft.
Link: https://lore.kernel.org/r/20190721224157.6597-1-linus.walleij@linaro.org
Fixes: ceb02dcf67 ("ARM: delete netx machine")
Acked-By: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.
Fixes: 6c009501ff ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The code in occ_get_powr_avg() invokes div64_u64() without checking the
divisor. In case the divisor is zero, kernel gets an "Division by zero
in kernel" error.
Check the divisor and make it return 0 if the divisor is 0.
Fixes: c10e753d43 ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Lei YU <mine260309@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/1562813088-23708-1-git-send-email-mine260309@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The following warning is seen when building with W=1:
arch/arm/boot/dts/imx7ulp.dtsi:189.31-195.5: Warning (simple_bus_reg): /bus@40000000/usb-phy@0x40350000: simple-bus unit address format error, expected "40350000"
Fix it as suggested by removing the extra "0x" notation.
Fixes: 5b7bd45631 ("ARM: dts: imx7ulp: add imx7ulp USBOTG1 support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).
Case:
1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.
So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.
Signed-off-by: Peter Kosyh <p.kosyh@gmail.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A small cleanup: this callback is never used.
Originally fixed by Stanislav Kinsburskiy <skinsbursky@virtuozzo.com>
for OpenVZ7 bug OVZ-6877
cc: stanislav.kinsburskiy@gmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c0d3a02c1 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c0d3a02c1 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c0d3a02c1 ("PCI: Add accessors for PCI Express Capability")
added accessors for the PCI Express Capability so that drivers didn't
need to be aware of differences between v1 and v2 of the PCI
Express Capability.
Replace pci_read_config_word() and pci_write_config_word() calls with
pcie_capability_read_word() and pcie_capability_write_word().
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an
ethtool set_channels operation is started. be_tx_timeout(), which dumps
some queue structures, is not written to run concurrently with
be_update_queues(), which frees/allocates those queues structures. Add some
synchronization between the two.
Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes an issue seen on Power systems with bnx2x which results
in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb
pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons
load in bnx2x_tx_int. Adding a read memory barrier resolves the issue.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX power read from the SFP uses units of 0.1uW. This must be
scaled to units of uW for HWMON. This requires a divide by 10, not the
current 100.
With this change in place, sensors(1) and ethtool -m agree:
sff2-isa-0000
Adapter: ISA adapter
in0: +3.23 V
temp1: +33.1 C
power1: 270.00 uW
power2: 200.00 uW
curr1: +0.01 A
Laser output power : 0.2743 mW / -5.62 dBm
Receiver signal average optical power : 0.2014 mW / -6.96 dBm
Reported-by: chris.healy@zii.aero
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 1323061a01 ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: David S. Miller <davem@davemloft.net>
It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2
switched in 3126.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
allocate_flower_entry does not check for allocation success, but tries
to deref the result. I only moved the spin_lock under null check, because
the caller is checking allocation's status at line 652.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All constant in 'enum HCLGE_MBX_OPCODE' start with HCLGE, except
'HLCGE_MBX_PUSH_VLAN_INFO' (C and L switched)
s/HLC/HCL/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/netfilter/nf_tables_offload.h includes net/netfilter/nf_tables.h
which is itself on the blacklist.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/tipc_toprsv_listener_data_ready/tipc_topsrv_listener_data_ready/
(r and s switched in topsrv)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
* ignore bad CW parameters if we aren't using them,
instead of warning
* fix operation (and then build) with the new netlink vendor
command policy requirement
* fix a memory leak in an error path when setting beacons
-----BEGIN PGP SIGNATURE-----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=BXF3
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have a handful of fixes:
* ignore bad CW parameters if we aren't using them,
instead of warning
* fix operation (and then build) with the new netlink vendor
command policy requirement
* fix a memory leak in an error path when setting beacons
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix several warnings/errors in validation of binding schemas.
-----BEGIN PGP SIGNATURE-----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=IkH4
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
"Fix several warnings/errors in validation of binding schemas"
* tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples
dt-bindings: iio: ad7124: Fix dtc warnings in example
dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
dt-bindings: pinctrl: aspeed: Fix AST2500 example errors
dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors
dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes
dt-bindings: Ensure child nodes are of type 'object'
Pull vfs documentation typo fix from Al Viro.
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
typo fix: it's d_make_root, not d_make_inode...
-----BEGIN PGP SIGNATURE-----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=rP0b
-----END PGP SIGNATURE-----
Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two fixes for stable, one that had dependency on earlier patch in this
merge window and can now go in, and a perf improvement in SMB3 open"
* tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: flush before set-info if we have writeable handles
smb3: optimize open to not send query file internal info
cifs: copy_file_range needs to strip setuid bits and update timestamps
CIFS: fix deadlock in cached root handling
The commit b3aa14f022 ("iommu: remove the mapping_error dma_map_ops
method") incorrectly changed the checking from dma_ops_alloc_iova() in
map_sg() causes a crash under memory pressure as dma_ops_alloc_iova()
never return DMA_MAPPING_ERROR on failure but 0, so the error handling
is all wrong.
kernel BUG at drivers/iommu/iova.c:801!
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0
Call Trace:
free_cpu_cached_iovas+0xbd/0x150
alloc_iova_fast+0x8c/0xba
dma_ops_alloc_iova.isra.6+0x65/0xa0
map_sg+0x8c/0x2a0
scsi_dma_map+0xc6/0x160
pqi_aio_submit_io+0x1f6/0x440 [smartpqi]
pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi]
scsi_queue_rq+0x79c/0x1200
blk_mq_dispatch_rq_list+0x4dc/0xb70
blk_mq_sched_dispatch_requests+0x249/0x310
__blk_mq_run_hw_queue+0x128/0x200
blk_mq_run_work_fn+0x27/0x30
process_one_work+0x522/0xa10
worker_thread+0x63/0x5b0
kthread+0x1d2/0x1f0
ret_from_fork+0x22/0x40
Fixes: b3aa14f022 ("iommu: remove the mapping_error dma_map_ops method")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(),
pte_free_kernel() and pte_free() is identical to the generic except of
lack of __GFP_ACCOUNT for the user PTEs allocation.
Switch hexagon to use generic version of these functions.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
to test and use this feature in the NTB transport layer. Also, bug
fixes for the AMD and Switchtec drivers, as well as some general
patches.
-----BEGIN PGP SIGNATURE-----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=P1lR
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
flush_tlb_all_local() flushes the ITLB and DTLB of the CPU.
In case the machine does not have separate ITLBs and DTLBs, use the
alternative functionality to replace the code which flushes the ITLB
with nops while keeping the code which flushes the DTLB.
Signed-off-by: Helge Deller <deller@gmx.de>
Add kprobe_fault_handler() to fix compilation for PA-RISC.
On PA-RISC we actually don't need that function as the recovery counter
is restored after interrupt. See the PA-RISC 2.0 Architecture Manual,
pg. 4-8, Figure 4-4: "Interruption Processing".
Fixes: b98cca444d ("mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Now that examples are validated against the DT schema, an error with
required 'clocks' property missing is exposed:
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@40020000: gpio@0: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@1000: 'clocks' is a required property
Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \
pinctrl@50020000: gpio@2000: 'clocks' is a required property
Add the missing 'clocks' properties to the examples to fix the errors.
Fixes: 2c9239c125 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
With the conversion to DT schema, the examples are now compiled with
dtc. The ad7124 binding example has the following warning:
Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \
Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
There's a default #size-cells and #address-cells values of 1 for
examples. For examples needing different values such as this one on a
SPI bus, they need to provide a SPI bus parent node.
Fixes: 26ae15e62d ("Convert AD7124 bindings documentation to YAML format.")
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Now that examples are validated against the DT schema, a typo in
avia-hx711 example generates a warning:
Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property
Fix the typo.
Fixes: 5150ec3fe1 ("avia-hx711.yaml: transform DT binding to YAML")
Cc: Andreas Klinger <ak@it-klinger.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The schema examples are now validated against the schema itself. The
AST2500 pinctrl schema has a couple of errors:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \
pinctrl: aspeed,external-nodes: [[1, 2]] is too short
Fixes: 0a617de167 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
The Aspeed pinctl schema have errors in the 'compatible' schema:
Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements
Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \
properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements
Flow style sequences have to be quoted if the vales contain ','. Fix
this by using the more common one line per entry formatting.
Fixes: 0a617de167 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema")
Fixes: 07457937bb ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema")
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Matching on the 'cpus' node was a bad choice because the schema is
incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus
schema which checks the general structure, it is also redundant to do so
in the Risc-V CPU schema.
The downside is one could conceivably mix different architecture's cpu
nodes or have typos in the compatible string. The latter problem pretty
much exists for every schema.
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Rob Herring <robh@kernel.org>