New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
- Core:
- New PHY attribute for max_link_rate
- New phy drivers:
- Rockchip dphy driver moved from staging
- Socionext UniPhier AHCI PHY driver
- Intel LGM SoC USB phy
- Intel Keem Bay eMMC PHY driver
- Updates:
- Support for imx8mp usb phy
- Support for DP Phy and USB3+DP combo phy in QMP driver
- Support for Qualcomm sc7180 DP phy
- Support for cadence torrent PCIe and USB single linke and multilink
configurations along with USB, SGMII/QSGMII configurations
-----BEGIN PGP SIGNATURE-----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=U0WQ
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next
Vinod writes:
phy for 5.9
- Core:
- New PHY attribute for max_link_rate
- New phy drivers:
- Rockchip dphy driver moved from staging
- Socionext UniPhier AHCI PHY driver
- Intel LGM SoC USB phy
- Intel Keem Bay eMMC PHY driver
- Updates:
- Support for imx8mp usb phy
- Support for DP Phy and USB3+DP combo phy in QMP driver
- Support for Qualcomm sc7180 DP phy
- Support for cadence torrent PCIe and USB single linke and multilink
configurations along with USB, SGMII/QSGMII configurations
* tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
phy: qcom-qmp: initialize the pointer to NULL
phy: qcom-qmp: Add support for sc7180 DP phy
phy: qcom-qmp: Add support for DP in USB3+DP combo phy
phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify
phy: qcom-qmp: Get dp_com I/O resource by index
phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'
phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'
phy: qcom-qmp: Move phy mode into struct qmp_phy
dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information
dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy
dt-bindings: phy: cdns,torrent-phy: add reset-names
phy: rockchip-dphy-rx0: Include linux/delay.h
phy: fix USB_LGM_PHY warning & build errors
phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration
phy: cadence-torrent: Add PCIe + USB multilink configuration
phy: cadence-torrent: Add single link USB register sequences
phy: cadence-torrent: Add single link SGMII/QSGMII register sequences
phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals
phy: cadence-torrent: Add PHY link configuration sequences for single link
phy: cadence-torrent: Add clk changes for multilink configuration
...
Smatch complains:
drivers/phy/qualcomm/phy-qcom-qmp.c:3899 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_cfg'.
drivers/phy/qualcomm/phy-qcom-qmp.c:3900 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_serdes'.
drivers/phy/qualcomm/phy-qcom-qmp.c:3902 qcom_qmp_phy_probe() error: uninitialized symbol 'usb_cfg'.
This is a warning but not a practical one as dp_cfg, dp_serdes and
usb_cfg will be set and used when valid. So we can set the pointers to
NULL to quiesce the warnings.
Fixes: 52e013d0bf ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201001070911.140019-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
*) Fix of leak in TI phy driver
-----BEGIN PGP SIGNATURE-----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=dNeg
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus
Vinod writes:
phy: Second round of fixes for 5.9
*) Fix of leak in TI phy driver
* tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: ti: am654: Fix a leak in serdes_am654_probe()
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
-----BEGIN PGP SIGNATURE-----
iQJMBAABCgA2FiEEACwLKSDmq+9RDv5P4cpzo8lZTiQFAl9f6twYHGNodW5rdWFu
Zy5odUBrZXJuZWwub3JnAAoJEOHKc6PJWU4k+FwQAItKwQieI/hfjE6+8AI4atW+
e7HV3BQ2MkctIqeis/RZv1ubOtVFbpy7U0ndOU2ejFTLs92qBDgf5x91ywFZBK9P
4n5BnU7uMmkhSSUJFfGAutADCONq2AsCCp7SNwqhCk865cYowbc0RBbE/6FyXPHB
XbmGKKyU61F0X/MdIXPIC37zUNIr0aynMHqo2dirhpQd3wKDxUcWaRzC3VC7tmA+
OgR0KQJondBtNeW0lHXv/beAyLbqQgMwlNbGNG0omWjnsO92BvmFyK1W1WYUMCRx
UMzbjzFV8SHn2ewVbGaNj8hgfnp3qA1CZ7qNcTZdYt3cEvj8xB8iGP4kRdzcCKh7
iqHqMQNrC+vWPtL6uNl/9MkO6mXpXL0bQj2tPkMf2tR33VbMS+L700QRgoC6PPrE
JTGb0/UEPrdL/wghJHOOJ+oYo/gaHjPgWZZ/FmPdS3VNZ9DqG1xGmzRdNpixCFKV
RK185UKiGgoUfv14kGWRu9YXS0I+nGl4tzj3xXCM0uxXEL0z7rxWhMEEkWzQfHqf
87hsbt8WD0/TAdEhUYdqfClKbxzlTMAiIbH9rTJii/wAXtP2mSx8fjoM3K4mr5k4
wx6RFPVpJkD7/CPNsJHuhicwn3AiBOlnEO9tfYqhqSOez1nFF9HaLur4XLpq4W0c
KqALebgZ9zM9UnJGlhIY
=NyM2
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.10
1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder
2. Convert mtk-dpi to drm_bridge API
3. Disable tmds on mt2701
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914231227.30500-1-chunkuang.hu@kernel.org
Add the necessary compatible strings and phy data for the sc7180 USB3+DP
combo phy.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org
Link: https://lore.kernel.org/r/20200916231202.3637932-9-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy
driver. We already have support for the USB3 part of the combo phy, so
most additions are for the DP phy.
Split up the qcom_qmp_phy{enable,disable}() functions into the phy init,
power on, power off, and exit functions that the common phy framework
expects so that the DP phy can add even more phy ops like
phy_calibrate() and phy_configure(). This allows us to initialize the DP
PHY and configure the AUX channel before powering on the PHY at the link
rate that was negotiated during link training.
The general design is as follows:
1) DP controller calls phy_init() to initialize the PHY and configure
the dp_com register region.
2) DP controller calls phy_configure() to tune the link rate and
voltage swing and pre-emphasis settings.
3) DP controller calls phy_power_on() to enable the PLL and power on
the phy.
4) DP controller calls phy_configure() again to tune the voltage swing
and pre-emphasis settings determind during link training.
5) DP controller calls phy_calibrate() some number of times to change
the aux settings if the aux channel times out during link training.
6) DP controller calls phy_power_off() if the link rate is to be
changed and goes back to step 2 to try again at a different link rate.
5) DP controller calls phy_power_off() and then phy_exit() to power
down the PHY when it is done.
The DP PHY contains a PLL that is different from the one used for the
USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk
output from the DP PLL after going through various dividers. Introduce
clk ops for these two clks that just tell the child clks what the
frequency of the pixel and link are. When the phy link rate is
configured we call clk_set_rate() to update the child clks in the
display clk controller on what rate is in use. The clk frequencies
always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or
8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or
HBR3) so we simply store the link rate and use that to calculate the clk
frequencies.
The PLL enable sequence is a little different from other QMP phy PLLs so
we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called
from phy_power_on(). This should probably be split out better so that
each phy has a way to run the final PLL/PHY enable sequence.
This code is based on a submission of this phy and PLL in the drm
subsystem.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org
Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We can use the wrapper API here to save some lines and remove the need
for the 'base' and 'res' local variable.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-7-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dp_com resource is always at index 1 according to the dts files in
the kernel. Get this resource by index so that we don't need to make
future additions to the DT binding use 'reg-names'.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-6-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The serdes I/O region is where the PLL for the phy is controlled.
Sometimes the PLL is shared between multiple phys, for example in the
PCIe case where there are three phys inside the same wrapper. Other
times the PLL is for a single phy, i.e. some USB3 phys. To complete the
trifecta we have the USB3+DP combo phy where the USB3 and DP phys each
have their own serdes region because they have their own PLL while they
both share a common I/O region pertaining to the USB type-c pinout and
cable orientation.
Let's move the serdes iomem pointer into 'struct qmp_phy' so that we can
correlate PLL control to the phy that uses it. This allows us to support
the USB3+DP combo phy in this driver. This isn't a problem for the
3-lane/phy PCIe phy because there is a common init function that is the
only place the serdes region is programmed.
Furthermore, move the configuration data that contains most of the
register programming sequences to the qmp phy struct. This data isn't
qmp wrapper specific. It is phy specific data used to tune various
settings for things like pre-emphasis, bias, etc.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-5-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We already track if any phy inside the qmp wrapper has been initialized
by means of the struct qcom_qmp::init_count member. Let's drop the
duplicate 'initialized' member to simplify the code a bit.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-4-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The phy mode pertains to the phy itself, i.e. 'struct qmp_phy', not the
wrapper, i.e. 'struct qcom_qmp'. Move the phy mode into the phy
structure to more accurately reflect what is going on. This also cleans
up 'struct qcom_qmp' so that it can eventually be the place where qmp
wrapper wide data is located, paving the way for the USB3+DP combo phy.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Vara Reddy <varar@codeaurora.org>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Manu Gautam <mgautam@codeaurora.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20200916231202.3637932-3-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix a Kconfig warning that is causing lots of build errors
when USB_SUPPORT is not set.
USB_PHY depends on USB_SUPPORT but "select" doesn't care about
dependencies, so this driver should also depend on USB_SUPPORT.
It should not select USB_SUPPORT.
WARNING: unmet direct dependencies detected for USB_PHY
Depends on [n]: USB_SUPPORT [=n]
Selected by [m]:
- USB_LGM_PHY [=m]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Li Yin <yin1.li@intel.com>
Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lYZv
-----END PGP SIGNATURE-----
Merge tag 'phy-attrs-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into 5.10/dp-pull
New phy attributes slated for kernel release v5.10. These are needed by
the Cadence MHDP driver.
For multilink configuration, deassert PHY and link reset after PHY
registers are configured in probe and only check link status in
power_on callback.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-7-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added support for multilink configuration of Torrent PHY. Currently,
maximum two links are supported. In case of multilink configuration,
PHY needs to be configured for both the protocols simultaneously at
the beginning as per the requirement of Torrent PHY.
Also, register sequences for PCIe + SGMII/QSGMII Unique SSC PHY multilink
configurations are added.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Link: https://lore.kernel.org/r/1600327846-9733-6-git-send-email-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rename phy-intel-{combo,emmc}.c to phy-intel-lgm-{combo,emmc}.c
to make drivers/phy/intel directory more generic for future use.
Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Link: https://lore.kernel.org/r/20200913235522.4316-2-wan.ahmad.zainie.wan.mohamad@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The regmap_config structs are never modified and can be made const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200912204639.501669-4-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
cdns_nxp_sequence_pair[] are never modified and can be made const to allow
the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200912204639.501669-3-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The static cdns_reg_pairs and regmap_config structs are not modified and
can be made const. This allows the compiler to put them in read-only
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200912204639.501669-2-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Without that patch if you use specific resolutions like 1280x1024,
I can see distortion in the output. It seems as if the
frequency for updating the pixel of the image is out of sync.
For initialization tmds needs to be active, but can be disabled after init
to fix blurry display
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
If devm_phy_create() fails then we need to call of_clk_del_provider(node)
to undo the call to of_clk_add_provider().
Fixes: 71e2f5c5c2 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200905124648.GA183976@mwanda
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On K3 AM654x/J721E platforms the Port MII mode selection register(s) have
similar format and placed in the System Control Module (SCM) module
sequentially as one register per port, but, depending SOC and CPSW
instance, the base offset and number of ports can be different.
Hence, add possibility to retrieve number of ports and base registers
offset from DT and support for max possible number of ports supported by K3
SoCs like J721E.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200828201943.29155-4-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Linus Torvalds
Greg Kroah-Hartman
Vinod Koul
Dave Airlie
Stephen Boyd
Tomasz Figa
Randy Dunlap
Tomi Valkeinen
Swapnil Jakhade
Wan Ahmad Zainie
Rikard Falkeborn
chunhui dai
Ramuthevar Vadivel Murugan
Dan Carpenter
Grygorii Strashko
Chunfeng Yun