Граф коммитов

29 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 06b49ea43c This is the bulk of GPIO changes for the v3.17 development
cycle, and this time we got a lot of action going on and
 it will continue:
 
 - The core GPIO library implementation has been split up in
   three different files:
   - gpiolib.c for the latest and greatest and shiny GPIO
     library code using GPIO descriptors only
   - gpiolib-legacy.c for the old integer number space API
     that we are phasing out gradually
   - gpiolib-sysfs.c for the sysfs interface that we are
     not entirely happy with, but has to live on for
     ABI compatibility
 
 - Add a flags argument to *gpiod_get* functions, with some
   backward-compatibility macros to ease transitions. We
   should have had the flags there from the beginning it
   seems, now we need to clean up the mess. There is a plan
   on how to move forward here devised by Alexandre Courbot
   and Mark Brown.
 
 - Split off a special <linux/gpio/machine.h> header for the
   board gpio table registration, as per example from the
   regulator subsystem.
 
 - Start to kill off the return value from gpiochip_remove()
   by removing the __must_check attribute and removing all
   checks inside the drivers/gpio directory. The rationale
   is: well what were we supposed to do if there is an error
   code? Not much: print an error message. And gpiolib already
   does that. So make this function return void eventually.
 
 - Some cleanups of hairy gpiolib code, make some functions
   not to be used outside the library private and make sure
   they are not exported, remove gpiod_lock/unlock_as_irq()
   as the existing function is for driver-internal use and
   fine as it is, delete gpio_ensure_requested() as it is
   not meaningful anymore.
 
 - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one()
   function calls, which is logical since this is already
   supported when referencing GPIOs from e.g. device trees.
 
 - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use
   the gpiolib irqchip helpers cutting down on GPIO irqchip
   boilerplate a bit more.
 
 - New driver for the Zynq GPIO block.
 
 - The usual incremental improvements around a bunch of
   drivers.
 
 - Janitorial syntactic and semantic cleanups by Jingoo Han,
   and Rickard Strandqvist especially.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5Ji9AAoJEEEQszewGV1zch8QAKp67+8ScxRBf/7RCSV6U/dy
 i7kt+nP4au/TScwtjbX264DM8hroW7BzN+GqF10NEFeGkYDR+42lMav9PrNjtKtk
 ojQPWdoGWzwwL0wa4j9rsuG/pRnbAEgDWPb+EkFdHQsLl6h71fyVoLOK+gKwJFyn
 aPYGXyNbT1FN38oj1rarENiOUxM7VMXvcJFfvDYFdDDhCS4PLYPOMw0lrsGtsHMZ
 epDa4z3yt4zHgYiUIT578nQ7EkIbGN3goywk3NQ+9WDQG+sLFHh4BdqcRKg6b9VM
 I64+47uNQxkyvWCvcLma5ziqvtNQk113986g+cv5YeTh18Ajyio1kxEIZM181eBk
 ITUPGrAorWHPLGNbe3psLmtK3+/BwmWIurPmHpckuW8d2JWWSVe0oepkUuqDwu/w
 lUB5KtM0joFOr5k61fj5tCKxH344jc1zvHJ/N+bVYilbOMvunWzuMJlc4hADIGC2
 1uxUAcPbYUAphGaxhdMBca9ellm0lWG19Gj5TtdGbRtNgp6R2qrwI66DDzk+1kLR
 8Szx6KHQdEHFTlCLKSIAMv33p1ClfmNikhdicT3urwR8PeXmmTR1pD7kGmVTDDZa
 gXSU5EilgGpak+77j/GZ2Ivp0Qt5M97UwWlZ7zTp++T1ZY+wwTHJI/09qcoWYjdz
 IpZRIqrQchalbscpn3LY
 =e+d6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO update from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.17 development cycle, and
  this time we got a lot of action going on and it will continue:

   - The core GPIO library implementation has been split up in three
     different files:
     - gpiolib.c for the latest and greatest and shiny GPIO library code
       using GPIO descriptors only
     - gpiolib-legacy.c for the old integer number space API that we are
       phasing out gradually
     - gpiolib-sysfs.c for the sysfs interface that we are not entirely
       happy with, but has to live on for ABI compatibility

   - Add a flags argument to *gpiod_get* functions, with some
     backward-compatibility macros to ease transitions.  We should have
     had the flags there from the beginning it seems, now we need to
     clean up the mess.  There is a plan on how to move forward here
     devised by Alexandre Courbot and Mark Brown

   - Split off a special <linux/gpio/machine.h> header for the board
     gpio table registration, as per example from the regulator
     subsystem

   - Start to kill off the return value from gpiochip_remove() by
     removing the __must_check attribute and removing all checks inside
     the drivers/gpio directory.  The rationale is: well what were we
     supposed to do if there is an error code? Not much: print an error
     message.  And gpiolib already does that.  So make this function
     return void eventually

   - Some cleanups of hairy gpiolib code, make some functions not to be
     used outside the library private and make sure they are not
     exported, remove gpiod_lock/unlock_as_irq() as the existing
     function is for driver-internal use and fine as it is, delete
     gpio_ensure_requested() as it is not meaningful anymore

   - Support the GPIOF_ACTIVE_LOW flag from gpio_request_one() function
     calls, which is logical since this is already supported when
     referencing GPIOs from e.g. device trees

   - Switch STMPE, intel-mid, lynxpoint and ACPI (!) to use the gpiolib
     irqchip helpers cutting down on GPIO irqchip boilerplate a bit more

   - New driver for the Zynq GPIO block

   - The usual incremental improvements around a bunch of drivers

   - Janitorial syntactic and semantic cleanups by Jingoo Han, and
     Rickard Strandqvist especially"

* tag 'gpio-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (37 commits)
  MAINTAINERS: update GPIO include files
  gpio: add missing includes in machine.h
  gpio: add flags argument to gpiod_get*() functions
  MAINTAINERS: Update Samsung pin control entry
  gpio / ACPI: Move event handling registration to gpiolib irqchip helpers
  gpio: lynxpoint: Convert to use gpiolib irqchip
  gpio: split gpiod board registration into machine header
  gpio: remove gpio_ensure_requested()
  gpio: remove useless check in gpiolib_sysfs_init()
  gpiolib: Export gpiochip_request_own_desc and gpiochip_free_own_desc
  gpio: move gpio_ensure_requested() into legacy C file
  gpio: remove gpiod_lock/unlock_as_irq()
  gpio: make gpiochip_get_desc() gpiolib-private
  gpio: simplify gpiochip_export()
  gpio: remove export of private of_get_named_gpio_flags()
  gpio: Add support for GPIOF_ACTIVE_LOW to gpio_request_one functions
  gpio: zynq: Clear pending interrupt when enabling a IRQ
  gpio: drop retval check enforcing from gpiochip_remove()
  gpio: remove all usage of gpio_remove retval in driver/gpio
  devicetree: Add Zynq GPIO devicetree bindings documentation
  ...
2014-08-08 18:00:35 -07:00
abdoulaye berthe 9f5132ae82 gpio: remove all usage of gpio_remove retval in driver/gpio
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:39:26 +02:00
Laurent Pinchart fe132649b5 gpio: rcar: Add support for DT IRQ flags
The gpio-rcar driver has no IRQ domain OF xlate function and thus
ignores IRQ flags specified in DT. Fix this by using the two-cell xlate
function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-15 20:55:15 +02:00
Jürg Billeter 7cb5409b10 gpio: rcar: clamp returned value to [0,1]
While it will be clamped to bool by gpiolib, let's make this sane
in the driver as well.

Signed-off-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-09 12:22:44 +02:00
Jingoo Han 41893360af gpio: rcar: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-09 10:55:11 +02:00
Geert Uytterhoeven df0c6c8023 gpio: rcar: Add minimal runtime PM support
This is just enough to automatically enable the functional clock, if
present. Clock management during suspend/resume is still to be added.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-gpio@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-28 12:35:10 -07:00
Geert Uytterhoeven b22978fc33 gpio: rcar: Add helper variable dev = &pdev->dev
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-gpio@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-28 21:54:41 +01:00
Linus Torvalds 8e50966072 GPIO tree bulk changes for v3.14
A big set this merge window, as we have much going on in
 this subsystem. Major changes this time:
 
 - Some core improvements and cleanups to the new GPIO
   descriptor API. This seems to be working now so we can
   start the exodus to this API, moving gradually away from
   the global GPIO numberspace.
 
 - Incremental improvements to the ACPI GPIO core, and move
   the few GPIO ACPI clients we have to the GPIO descriptor
   API right *now* before we go any further. We actually
   managed to contain this *before* we started to litter
   the kernel with yet another hackish global numberspace for
   the ACPI GPIOs, which is a big win.
 
 - The RFkill GPIO driver and all platforms using it have
   been migrated to use the GPIO descriptors rather than
   fixed number assignments. Tegra machine has been migrated
   as part of this.
 
 - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.
   Those should be really good examples of how I expect a
   nice GPIO driver to look these days.
 
 - Do away with custom GPIO implementations on a major
   part of the ARM machines: ks8695, lpc32xx, mv78xx0.
   Make a first step towards the same in the horribly
   convoluted Samsung S3C include forest. We expect to
   continue to clean this up as we move forward.
 
 - Flag GPIO lines used for IRQ on adnp, bcm-kona, em,
   intel-mid and lynxpoint.
   This makes the GPIOlib core aware that a certain GPIO line
   is used for IRQs and can then enforce some semantics such
   as disallowing a GPIO line marked as in use for IRQ to be
   switched to output mode.
 
 - Drop all use of irq_set_chip_and_handler_name().
   The name provided in these cases were just unhelpful
   tags like "mux" or "demux".
 
 - Extend the MCP23s08 driver to handle interrupts.
 
 - Minor incremental improvements for rcar, lynxpoint, em
   74x164 and msm drivers.
 
 - Some non-urgent bug fixes here and there, duplicate
   #includes and that usual kind of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS3i/MAAoJEEEQszewGV1zVB8P/Rjzgx8To0gQPn49M4u/A1Mk
 mAzpUoKa05ILTKBm/bpWPYZPpg9PDqUxOYPsIDEAkc70BKMPTXxrYiE+LSfIzwaJ
 a8IRwOzNL7Iwc+zPNS/GrmRJyxymb4lmMD/fypk/YaumZ6j4Hbo+9R8Zct9gbZ5Q
 ZbKtz6kLhbkbNCc71bVMgk6yacSBx1ak8Xpd12HlW85NgOCoBj7/DI1Lb61x1ImY
 NYpSpmtfGGTkQLtBl5dTLefZOvL1dKSct9TMOsA2jzNqf3zA1YA6XOxPGHK/qtjq
 3s9cN1sIVF/g7sm1+qoKXe0OTQrXHT7SX8BH9/tb3MiKO8ItactlQUJlYNR3WFSN
 zm1PNe5zWr+GWzV0iUrqoMN4XX8nThiFDOxZpOwBTZcUD6qtDFIZp41M3qxwFTbJ
 hCtSQ8gUO1Ce+xtOQYYOwEkRS7FZa1Z+p/lendTFuGDh6DcXy97SrKkTktM4Q98B
 LhqrwUzCdES0ecNDi2+P5y4Fc7M0cMMn9SnFvbSBObLB89TF9uzMIn8jUBCZMvrM
 eAeZlRBYk8F+6F12higaWqZyiBKIEubXo/Z8T0L2KEDm/z/ddJvhQgBKvWlf3rqi
 RToD446rda+RhFBnxLZ3mTui5nZ2WyKTOqhVqeBuriJhE/cTUaQHUBUrbOwx20kE
 Xb9mQ2n3GRk2157n1CLY
 =lW2i
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO tree bulk changes from Linus Walleij:
 "A big set this merge window, as we have much going on in this
  subsystem.  The changes to other subsystems (notably a slew of ARM
  machines as I am doing away with their custom APIs) have all been
  ACKed to the extent possible.

  Major changes this time:

   - Some core improvements and cleanups to the new GPIO descriptor API.
     This seems to be working now so we can start the exodus to this
     API, moving gradually away from the global GPIO numberspace.

   - Incremental improvements to the ACPI GPIO core, and move the few
     GPIO ACPI clients we have to the GPIO descriptor API right *now*
     before we go any further.  We actually managed to contain this
     *before* we started to litter the kernel with yet another hackish
     global numberspace for the ACPI GPIOs, which is a big win.

   - The RFkill GPIO driver and all platforms using it have been
     migrated to use the GPIO descriptors rather than fixed number
     assignments.  Tegra machine has been migrated as part of this.

   - New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.  Those
     should be really good examples of how I expect a nice GPIO driver
     to look these days.

   - Do away with custom GPIO implementations on a major part of the ARM
     machines: ks8695, lpc32xx, mv78xx0.  Make a first step towards the
     same in the horribly convoluted Samsung S3C include forest.  We
     expect to continue to clean this up as we move forward.

   - Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
     lynxpoint.

     This makes the GPIOlib core aware that a certain GPIO line is used
     for IRQs and can then enforce some semantics such as disallowing a
     GPIO line marked as in use for IRQ to be switched to output mode.

   - Drop all use of irq_set_chip_and_handler_name().  The name provided
     in these cases were just unhelpful tags like "mux" or "demux".

   - Extend the MCP23s08 driver to handle interrupts.

   - Minor incremental improvements for rcar, lynxpoint, em 74x164 and
     msm drivers.

   - Some non-urgent bug fixes here and there, duplicate #includes and
     that usual kind of cleanups"

Fix up broken Kconfig file manually to make this all compile.

* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
  gpio: mcp23s08: fix casting caused build warning
  gpio: mcp23s08: depend on OF_GPIO
  gpio: mcp23s08: Add irq functionality for i2c chips
  ARM: S5P[v210|c100|64x0]: Fix build error
  gpio: pxa: clamp gpio get value to [0,1]
  ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
  ARM: S3C[24|64]xx: move includes back under <mach/> scope
  Documentation / ACPI: update to GPIO descriptor API
  gpio / ACPI: get rid of acpi_gpio.h
  gpio / ACPI: register to ACPI events automatically
  mmc: sdhci-acpi: convert to use GPIO descriptor API
  ARM: s3c24xx: fix build error
  gpio: f7188x: set can_sleep attribute
  gpio: samsung: Update documentation
  gpio: samsung: Remove hardware.h inclusion
  gpio: xtensa: depend on HAVE_XTENSA_GPIO32
  gpio: clps711x: Enable driver compilation with COMPILE_TEST
  gpio: clps711x: Use of_match_ptr()
  net: rfkill: gpio: convert to descriptor-based GPIO interface
  leds: s3c24xx: Fix build failure
  ...
2014-01-21 10:09:12 -08:00
Valentine Barshak 8808b64daa gpio: rcar: Fix level interrupt handling
According to the manual, if a port is set for level detection using
the corresponding bit in the edge/level select register and an external
level interrupt signal is asserted, the corresponding bit in INTDT
does not use the FF to hold the input.
Thus, writing 1 to the corresponding bits in INTCLR cannot clear the
corresponding bits in the INTDT register. Instead, when an external
input signal is stopped, the corresponding bit in INTDT is cleared
automatically.

Since the INTDT bit cannot be cleared for the level interrupts until
the interrupt signal is stopped, we end up with the infinite loop
when using deferred (threaded) IRQ handling.

Since a deferred interrupt is disabled by the low-level handler and
re-enabled only when the deferred handler is completed, Fix the issue
by dropping disabled interrupts from the pending mask as suggested by
Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Changes in V2:
* Drop disabled interrupts from pending mask altogether instead of
  dropping level interrupts one by one once they get handled.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 20:53:05 +01:00
Linus Walleij bdc54ef45d Linux 3.13-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSogqUAAoJEHm+PkMAQRiGM2MIAJrr5KEXEWuuAR4+JkkWBK7A
 +dVT4n1MM4wP/aCIyriSlq7kgT03Wxk4Q4wKsj2wZvDQkNgEQjrctgIihc75jqi5
 126nmT3YXJLwgDpFA3RHZUWve3j3vfUG53rRuk7K9Xx1sGWU3Ls7BuInvQZ//+QS
 6UB4UuEAalmose5U8ToXQfMqZhjwreZKeb64TEZwFvu2klv4cnka1L/zHbmQGgRg
 2Pfv+aUrjsYE8s9lkEKX8MIQsDn28Q5Lsv7XIEQwo2at4rYbJaxX6usuC1OI0MQ5
 BLUn1GgtvOidq6FzSg6kXiA/MJYH3J0S+p4uULWAprxA+KeJRbWNRroM94W1qAk=
 =1Wcq
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc3' into devel

Linux 3.13-rc3
2013-12-09 14:04:37 +01:00
Laurent Pinchart 850dfe17e3 gpio: rcar: Support both edge trigger with DT
Some versions of the R-Car GPIO controller support triggering on both
edges of the input signal. Whether this capability is supported is
currently specified in platform data. R-Car GPIO devices instantiated
from the device tree have the capability turned off even when the
hardware supports it.

To fix this, add DT match data support to the driver, initialize both
edge trigger support from match data and enable both edge trigger in
r8a7790 and r8a7791 match data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03 11:26:07 +01:00
Magnus Damm 4039611206 gpio: rcar: Enable mask on suspend
Now when lazy interrupt disable has been enabled in the driver
then extend the code to set IRQCHIP_MASK_ON_SUSPEND which tells
the core that only IRQs marked as wakeups need to stay enabled
during Suspend-to-RAM.

Tested on the Lager board with GPIO-keys and Suspend-to-RAM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25 09:03:39 +01:00
Magnus Damm fba968a1e6 gpio: rcar: Use lazy disable
Set the ->irq_enable() and ->irq_disable() methods to NULL
to enable lazy disable of interrupts. This by itself provides
some level of optimization, but is mainly enabled as ground
work for future Suspend-to-RAM wake up support.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25 09:03:39 +01:00
Dan Carpenter 0c8aab8e65 gpio: rcar: NULL dereference on error in probe()
It's not obvious from the label name but "err1" tries to release
"p->irq_domain" which leads to a NULL dereference.

Fixes: 119f5e448d ('gpio: Renesas R-Car GPIO driver V3')

Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25 09:03:12 +01:00
Sachin Kamat bd0bf46844 gpio: rcar: Include linux/of.h header
'of_match_ptr' is defined in linux/of.h. Include it explicitly to
avoid build breakage in the future.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16 13:10:00 +02:00
Linus Walleij 263c43a447 Linux 3.12-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQEcBAABAgAGBQJSUc9zAAoJEHm+PkMAQRiG9DMH/AtpuAF6LlMRPjrCeuJQ1pyh
 T0IUO+CsLKO6qtM5IyweP8V6zaasNjIuW1+B6IwVIl8aOrM+M7CwRiKvpey26ldM
 I8G2ron7hqSOSQqSQs20jN2yGAqQGpYIbTmpdGLAjQ350NNNvEKthbP5SZR5PAmE
 UuIx5OGEkaOyZXvCZJXU9AZkCxbihlMSt2zFVxybq2pwnGezRUYgCigE81aeyE0I
 QLwzzMVdkCxtZEpkdJMpLILAz22jN4RoVDbXRa2XC7dA9I2PEEXI9CcLzqCsx2Ii
 8eYS+no2K5N2rrpER7JFUB2B/2X8FaVDE+aJBCkfbtwaYTV9UYLq3a/sKVpo1Cs=
 =xSFJ
 -----END PGP SIGNATURE-----

Merge tag 'v3.12-rc4' into devel

Linux 3.12-rc4
2013-10-16 10:05:53 +02:00
Linus Walleij c0d6c1ad0a gpio: rcar: drop references to "virtual" IRQ
Rename the argument "virq" to just "irq", this IRQ isn't any
more "virtual" than any other Linux IRQ number, we use "hwirq"
for the actual hw-numbers, "virq" is just bogus.

Cc: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-16 09:59:53 +02:00
Laurent Pinchart 01eb2d18fd gpio: rcar: Remove #gpio-range-cells DT property usage
Commit a1bc260bb5 ("gpio: clean up
gpio-ranges documentation") deprecated the #gpio-range-cells property.
Replace its usage with a hardcoded value in the gpio-rcar driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-22 21:28:11 +09:00
Jingoo Han e56aee1897 gpio: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-16 15:24:35 +02:00
Linus Torvalds 60b5adffb4 GPIO changes for the v3.11 development cycle:
- Incremental development for the Langwell (Atom SoC),
   Xilinx, ICH and RCAR drivers.
 - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun,
   Wolfram Sang, Tushar Behera, Sachin Kamat and Yijing Wang.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0T6GAAoJEEEQszewGV1zs14QAJj+NPEy5yIVUMLqBp68Wwvo
 KHryjSLIDsrZj3GthRn8XG61zjdZxCuJY+i8FPldu0mIeJ1rpqxJS1DU8q0CXvuc
 uJV5pBXY48WOiutspz1m3HMgNINrm2K8hgvGc3T+oSjh0+De8iacorWEPYjVZllW
 ibm3rsgzamqRkI9SgXpfH5VFs9HNsxrpxgS+dRztIndWM3pEzyJQHgYm9TYEnMg8
 XNWIRo54v1PRgIlW/zFMVVZvhzVc8sWjaVCp8uMnlDbyU2u/uFB632QinMyi5G7z
 LaMR4AgVzC2+6Gc/7zuYSvTqTrI7Y8Dqucmz4lcsabKsoRYmdG3GZSgPRE8Eo/4b
 E5t5MBb9o7juXprqMRNi68W8r9zob4UAA34KT+hkgE5dL+EDYWguX59IhQ2EkSrh
 X/2OeiLi2icdBQ+yjVc0qQ07q8tAGSFX/atY3KPzvLhoxFEDdaOuI7R0r1DNT5LN
 1Vps6qQVyQmsHcHO8PaPIXB76KuOQ7W4oYfma/JjxOjZtjcGJdyG+/0UkdsSobET
 l4Q+2WxlozNoN6zsHeJd2iPc6LB61ZCG3BzsCbv/tVPEJ8fsMylC1pAAEoaNZ6zf
 0HzTFWa2ZiBe7F95m2leQmtHlvZ2oME+IkS3xUY8v0VQD77bdKWXs63c91JUHLC9
 BywEJzCgXvUoR6O+mr4p
 =5JfC
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "Here is a batch of GPIO changes for v3.11.  I have agreed with Grant
  to take care of the pull requests for this development cycle.

  No special things are happening in the GPIO tree this time (nice with
  some calm) and I have been extra careful to do regression builds and
  it's well boiled in -next.

  GPIO changes for the v3.11 development cycle:
   - Incremental development for the Langwell (Atom SoC), Xilinx, ICH
     and RCAR drivers.
   - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun, Wolfram Sang,
     Tushar Behera, Sachin Kamat and Yijing Wang"

* tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (35 commits)
  Gpio/trivial: replace numeric with standard PM state macros
  gpiolib: remove warnning of allocations with IRQs disabled
  gpio: grgpio: Staticize local symbols
  gpio-langwell: remove Withney point support
  gpio: ich: add GPO_BLINK support
  gpio-sta2x11: Convert to use devm_ioremap_resource
  gpio_msm: Convert to use devm_ioremap_resource
  gpio-rcar: Use OUTDT when reading GPIOs configured as output
  gpio-sta2x11: Fix potential NULL pointer dereference
  gpio/omap: omap_gpio_init_context stub must be inline
  gpio: msm-v1: Remove errant __devinit to fix compile
  gpio: devres: make comments proper
  GPIO: xilinx: Enable driver for Xilinx zynq
  DT: Add documentation for gpio-xilinx
  GPIO: xilinx: Use BIT macro
  GPIO: xilinx: Use __raw_readl/__raw_writel IO functions
  GPIO: xilinx: Add support for dual channel
  GPIO: xilinx: Simplify driver probe function
  gpio: sx150x: convert to use devm_* functions
  MAINTAINERS: add linux-gpio mailing list
  ...
2013-07-03 11:39:44 -07:00
Arnd Bergmann e7692e2cfd Second Round of Renesas ARM based SoC GPIO R-Car updates for v3.11
Documentation enhancement and code cleanup by Laurent Pinchart.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRwvwkAAoJENfPZGlqN0++mukP/1+rldtrgijEKjqRLFFll2M1
 3Z1FABTR7IywSzGvr2npBpmfPsa+w9Cmnn6BDTKUHjJYyurjiinumtDLH5oo6/Xb
 fXmhmco1huO0rnf9C84GysmDjDdSqYMs6wEaG2XjDcLPpYd6pLkb5/tl5bnTCoSt
 MW5kChypAVcrVflc2DMMU0cTtJ2joslOASHxlTXwCfgdG87R8iX2FtoPynKL9l3i
 pe0R8ASoZkxtGd4JT9PJyORq0PtACJB0z4Wm2V7wM8S/Cln4mDIl6NJc3VWCMnHp
 2YRvSMhUDpKfhDrSnGFVHAhJBMuJQdVRHSxj0ZwDKQi9xeQr7lsfGa5bbb3a3pOr
 HYGz/eRkExIRWFw8rQ4YGoEAN6T7os5BTxxSTagRztZxRz5fD+yqQMGzv9/uIG9c
 iKOkGhrR0UPz4Ul8fo/C+uX8kvSfX4CpVozCBFOnszW0pMF/qIabsOVpJoAMOBsR
 q2YIyLkFxn/S97DK4xm/lyX1o3SBwIOeyCHb5KIlxFS6AVgOvxJwowjfQSaDbrP0
 MIFxTSd4rkIt3kph6gT2cfJ6l8TbXs0bxtxWzOfu4UAVrwdc/HJzLUcSs++0s7Ca
 +Z48tjhuz3a8WPQgay1l8PoEaFXzvMaLNTMbG+Zfx9gVyWbmyk5r6VM7akXJqy2P
 cJA8purzFCEWjmk0od51
 =tnz4
 -----END PGP SIGNATURE-----

Merge tag 'renesas-gpio-rcar2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

From Simon Horman:

Second Round of Renesas ARM based SoC GPIO R-Car updates for v3.11

Documentation enhancement and code cleanup by Laurent Pinchart.

* tag 'renesas-gpio-rcar2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21 15:15:57 +02:00
Arnd Bergmann 30d2266c68 gpio: rcar: fix gpio_rcar_of_table
The device table needs to be terminated with an empty element.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
2013-06-19 17:47:25 +02:00
Laurent Pinchart e305062e94 gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
All functions and data types used by OF-specific code paths are declared
in <linux/of.h> regardless of CONFIG_OF. Replace the #ifdef CONFIG_OF
guard with a if(IS_ENABLED(CONFIG_OF)) and let the compiler optimize
the unused code away.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-19 21:38:38 +09:00
Magnus Damm ae9550f635 gpio-rcar: Use OUTDT when reading GPIOs configured as output
Testing on r8a7790 shows that INDT does not indicate the correct
pin state when reading a GPIO configured as output, so update
the gpio_rcar_get() function to handle this case.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 10:34:36 +02:00
Laurent Pinchart 159f8a0209 gpio-rcar: Add DT support
Add DT bindings for the gpio-rcar driver and read the device
configuration from the DT node at probe time if available.

Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-12 21:48:09 +09:00
Simon Horman 7e1092b5a2 gpio-rcar: Add support for IRQ_TYPE_EDGE_BOTH
As hardware support for this feature is not universal for all SoCs a flag,
has_both_edge_trigger, has been added to the platform data of the driver to
allow this feature to be enabled.

The motivation for this is to allow use of the gpio-keys driver on the
lager board which is based on the r8a7790 SoC. The V2 of this patch has been
fully exercised using that driver on that board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04 20:28:36 +09:00
Kuninori Morimoto c234962b80 gpio-rcar: R-Car GPIO IRQ share interrupt
R-Car H1 or Gen2 GPIO interrupts are assigned per each GPIO domain,
but, Gen1 E1/M1 GPIO interrupts are shared for all GPIO domain.
gpio-rcar driver needs IRQF_SHARED flags for these.
This patch was tested on Bock-W board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-04 20:28:36 +09:00
Laurent Pinchart dc3465a943 gpio-rcar: Add pinctrl support
Register the GPIO pin range, and request and free GPIO pins using the
pinctrl API.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03 10:30:34 +09:00
Magnus Damm 119f5e448d gpio: Renesas R-Car GPIO driver V3
This patch is V3 of a GPIO driver for the R-Car series of
SoCs from Renesas. This driver is designed to be reusable
between multiple SoCs that share the same basic building block,
but so far it has only been used on R-Car H1 (r8a7779).

Each driver instance handles 32 GPIOs with individually
maskable IRQs. The driver operates on a single I/O memory
range and the 32 GPIOs are hooked up a single interrupt.

In the case of R-Car H1 either external IRQ pins or GPIOs
with interrupts can be used for on-board interupts. For
external IRQs 4 pins are supported, and in the case of GPIO
there are 202 GPIOS as 202 interrupts hooked up via 6 driver
instances and to the GIC and the Cortex-A9 Quad.

At this point this driver is interfacing as a regular
platform device driver. In the future DT support will be
submitted as an incremental feature patch.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-03 10:30:24 +09:00