Граф коммитов

2590 Коммитов

Автор SHA1 Сообщение Дата
Lars-Peter Clausen 6731af573a tty: xuartps: Fix tx_emtpy() callback
The tx_empty() callback currently checks the TXEMPTY bit in the interrupt
status register to decided whether the FIFO should be reported as empty or
not. The bit in this register gets set when the FIFO state transitions from
non-empty to empty but is cleared again in the interrupt handler. This means
it is not suitable to be used to decided whether the FIFO is currently empty
or not. Instead use the TXEMPTY bit from the status register which will be
set as long as the FIFO is empty.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:33:56 -07:00
Richard Genoud 35b675b910 tty/serial: at91: BUG: disable interrupts when !UART_ENABLE_MS()
In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was
false.

Tested on at91sam9g35.

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org> # >= 3.16
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:33:56 -07:00
Alan Cox f174442ed1 serial: 8250_dw: Add ACPI ID for Intel Braswell
Another new ACPI identifier for the 8250 dw bindings to cover newer Intel
SoCs such as Braswell.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08 16:33:56 -07:00
Linus Torvalds ae36e95cf8 The branch contains the following device tree changes the v3.17 merge
window:
 
 Group changes to the device tree. In preparation for adding device tree
 overlay support, OF_DYNAMIC is reworked so that a set of device tree
 changes can be prepared and applied to the tree all at once. OF_RECONFIG
 notifiers see the most significant change here so that users always get
 a consistent view of the tree. Notifiers generation is moved from before
 a change to after it, and notifiers for a group of changes are emitted
 after the entire block of changes have been applied
 
 Automatic console selection from DT. Console drivers can now use
 of_console_check() to see if the device node is specified as a console
 device. If so then it gets added as a preferred console. UART devices
 get this support automatically when uart_add_one_port() is called.
 
 DT unit tests no longer depend on pre-loaded data in the device tree.
 Data is loaded dynamically at the start of unit tests, and then unloaded
 again when the tests have completed.
 
 Also contains a few bugfixes for reserved regions and early memory setup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6M7XAAoJEMWQL496c2LNTTgP/2rXyrTTGZpK/qrLKHWKYHvr
 XL7tcTkhA0OLU64E37fB+xtDXyBYnLsharuwUFSd1LlL1Wnc1cZN5ORRlMJbmjUR
 Wvwl0A8/mkhGl4tzzKgJ4z4rMJXvlZfJRpnVoRB5FOn90LI7k/jsf5rIwF/6S90B
 6D6II0r4RG9ku1m7g70cToxcIFCzp0V+eu2tym9GnhsyGKlunPT9iNiTpwfVhPAj
 QUvMPKIQXReOv6xDU5q6E07839IMf7SdAvciBTHGnCDD7sGziHvnBIShj/2vTDAF
 27sGRKrWUnnuxRUMOoIudiYyeHXIdt1WXp6FsS/ztVI37Ijh9YPShJwWGhQDppnp
 4tcoSdefqw9IRUajAVWsB0RUW/tCL4a7tggWofylOA6itDi+HZnw6YafE1G1YzxF
 q8OFo9uqLcmFQfHDJpk+sdtXoMZzOgrxlEscsGsQ8kd2Uoe8+chgR9EY1sqPkWVF
 Zw0FJCTB6spBlsnXeboBGrnvpbPkacwhvesIFO0IANy4j4R55xlEeTcs1fe3ubUf
 UhNyyFdnCAUA7e5CAabcAQYsdbEKG6v0Il3H6xts36c8lXCSFXVgNcw5mdCpFCcQ
 DZ3/1FGSVzkYNXX8hlzIn1W0dqvwn4x0ZbnpXUJrGUBpSmjt9qkXx0XbdeFwartU
 7X4tNGS1jfNYhOdP87jF
 =8IFz
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree updates from Grant Likely:
 "The branch contains the following device tree changes the v3.17 merge
  window:

  Group changes to the device tree.  In preparation for adding device
  tree overlay support, OF_DYNAMIC is reworked so that a set of device
  tree changes can be prepared and applied to the tree all at once.
  OF_RECONFIG notifiers see the most significant change here so that
  users always get a consistent view of the tree.  Notifiers generation
  is moved from before a change to after it, and notifiers for a group
  of changes are emitted after the entire block of changes have been
  applied

  Automatic console selection from DT.  Console drivers can now use
  of_console_check() to see if the device node is specified as a console
  device.  If so then it gets added as a preferred console.  UART
  devices get this support automatically when uart_add_one_port() is
  called.

  DT unit tests no longer depend on pre-loaded data in the device tree.
  Data is loaded dynamically at the start of unit tests, and then
  unloaded again when the tests have completed.

  Also contains a few bugfixes for reserved regions and early memory
  setup"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: (21 commits)
  of: Fixing OF Selftest build error
  drivers: of: add automated assignment of reserved regions to client devices
  of: Use proper types for checking memory overflow
  of: typo fix in __of_prop_dup()
  Adding selftest testdata dynamically into live tree
  of: Add todo tasklist for Devicetree
  of: Transactional DT support.
  of: Reorder device tree changes and notifiers
  of: Move dynamic node fixups out of powerpc and into common code
  of: Make sure attached nodes don't carry along extra children
  of: Make devicetree sysfs update functions consistent.
  of: Create unlocked versions of node and property add/remove functions
  OF: Utility helper functions for dynamic nodes
  of: Move CONFIG_OF_DYNAMIC code into a separate file
  of: rename of_aliases_mutex to just of_mutex
  of/platform: Fix of_platform_device_destroy iteration of devices
  of: Migrate of_find_node_by_name() users to for_each_node_by_name()
  tty: Update hypervisor tty drivers to use core stdout parsing code.
  arm/versatile: Add the uart as the stdout device.
  of: Enable console on serial ports specified by /chosen/stdout-path
  ...
2014-08-14 09:53:39 -06:00
Grant Likely b775e642bf Merge branch 'devicetree/next-console' into devicetree/next 2014-08-11 14:03:08 +01:00
Linus Torvalds 8065be8d03 Merge branch 'akpm' (second patchbomb from Andrew Morton)
Merge more incoming from Andrew Morton:
 "Two new syscalls:

     memfd_create in "shm: add memfd_create() syscall"
     kexec_file_load in "kexec: implementation of new syscall kexec_file_load"

  And:

   - Most (all?) of the rest of MM

   - Lots of the usual misc bits

   - fs/autofs4

   - drivers/rtc

   - fs/nilfs

   - procfs

   - fork.c, exec.c

   - more in lib/

   - rapidio

   - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs,
     fs/cramfs, fs/romfs, fs/qnx6.

   - initrd/initramfs work

   - "file sealing" and the memfd_create() syscall, in tmpfs

   - add pci_zalloc_consistent, use it in lots of places

   - MAINTAINERS maintenance

   - kexec feature work"

* emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits)
  MAINTAINERS: update nomadik patterns
  MAINTAINERS: update usb/gadget patterns
  MAINTAINERS: update DMA BUFFER SHARING patterns
  kexec: verify the signature of signed PE bzImage
  kexec: support kexec/kdump on EFI systems
  kexec: support for kexec on panic using new system call
  kexec-bzImage64: support for loading bzImage using 64bit entry
  kexec: load and relocate purgatory at kernel load time
  purgatory: core purgatory functionality
  purgatory/sha256: provide implementation of sha256 in purgaotory context
  kexec: implementation of new syscall kexec_file_load
  kexec: new syscall kexec_file_load() declaration
  kexec: make kexec_segment user buffer pointer a union
  resource: provide new functions to walk through resources
  kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc()
  kexec: move segment verification code in a separate function
  kexec: rename unusebale_pages to unusable_pages
  kernel: build bin2c based on config option CONFIG_BUILD_BIN2C
  bin2c: move bin2c in scripts/basic
  shm: wait for pins to be released when sealing
  ...
2014-08-08 15:57:47 -07:00
Joe Perches d54d7796c5 synclink_gt: use pci_zalloc_consistent
Remove the now unnecessary memset too.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:30 -07:00
Linus Torvalds b3345d7c57 ARM: SoC platform changes for 3.17
This is the bulk of new SoC enablement and other platform changes for 3.17:
 
 * Samsung S5PV210 has been converted to DT and multiplatform
 * Clock drivers and bindings for some of the lower-end i.MX 1/2 platforms
 * Kirkwood, one of the popular Marvell platforms, is folded into the
   mvebu platform code, removing mach-kirkwood.
 * Hwmod data for TI AM43xx and DRA7 platforms.
 * More additions of Renesas shmobile platform support
 * Removal of plat-samsung contents that can be removed with S5PV210 being
   multiplatform/DT-enabled and the other two old platforms being removed.
 
 New platforms (most with only basic support right now):
 
 * Hisilicon X5HD2 settop box chipset is introduced
 * Mediatek MT6589 (mobile chipset) is introduced
 * Broadcom BCM7xxx settop box chipset is introduced
 
 + as usual a lot other pieces all over the platform code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5Dp+AAoJEIwa5zzehBx3w1sP/0vjT/LQOmC8Lv8RW2Ley2ua
 hNu3HcNPnT/N40JEdU9YNv3q0fdxGgcfKj011CNN+49zPSUf1xduk2wfCAk9yV50
 8Sbt1PfDGm1YyUugGN420CzI431pPoM1OGXHZHkAmg+2J286RtUi3NckB//QDbCY
 QhEjhpYc9SXhAOCGwmB4ab7thOljOFSPzKTLMTu3+PNI5zRPRgkDkt6w9XlsAYmB
 nuR271BnzsROkMzAjycwaJ3kdim7wqrMRfk8g96o0jHSF5qf4zsT5uWYYAjTxdUQ
 8Ajz6zjeHe4+95TwTDcq+lCX6rDLZgwkvCAc6hFbeg0uR7Dyek0h6XMEYtwdjaiU
 KNPwOENrYdENNDAGRpkFp1x4h/rY9Plfru0bBo5o6t7aPBvmNeCDzRtlTtLiUNDV
 dG8sfDMtrS/wFHVjylDSQ60Mb+wuW0XneC8D7chY/iRhIllUYi6YXXvt+/tH5C20
 oYDOWqqcDFSb0sJhE5pn4KBV82ZaHx9jMBWGLl+erg2sDX/SK8SxOkLqKYZKtKB5
 0leOGE3Y+C70xt3G9HftLz2sAvvt+C8UPsApPT+dHNE401TWJOYx6LphPkQKjeeK
 P1iwKi+It3l+FaBypgJy/LeMQRy7EyvDBK2I5WoVL/R2qq14EmP1ui3Tthjj0bhq
 tBBof6P9c8OnRVj1Lz3R
 =5TJ6
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This is the bulk of new SoC enablement and other platform changes for
  3.17:

   - Samsung S5PV210 has been converted to DT and multiplatform
   - Clock drivers and bindings for some of the lower-end i.MX 1/2
     platforms
   - Kirkwood, one of the popular Marvell platforms, is folded into the
     mvebu platform code, removing mach-kirkwood
   - Hwmod data for TI AM43xx and DRA7 platforms
   - More additions of Renesas shmobile platform support
   - Removal of plat-samsung contents that can be removed with S5PV210
     being multiplatform/DT-enabled and the other two old platforms
     being removed

  New platforms (most with only basic support right now):

   - Hisilicon X5HD2 settop box chipset is introduced
   - Mediatek MT6589 (mobile chipset) is introduced
   - Broadcom BCM7xxx settop box chipset is introduced

  + as usual a lot other pieces all over the platform code"

* tag 'soc-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (240 commits)
  ARM: hisi: remove smp from machine descriptor
  power: reset: move hisilicon reboot code
  ARM: dts: Add hix5hd2-dkb dts file.
  ARM: debug: Rename Hi3716 to HIX5HD2
  ARM: hisi: enable hix5hd2 SoC
  ARM: hisi: add ARCH_HISI
  MAINTAINERS: add entry for Broadcom ARM STB architecture
  ARM: brcmstb: select GISB arbiter and interrupt drivers
  ARM: brcmstb: add infrastructure for ARM-based Broadcom STB SoCs
  ARM: configs: enable SMP in bcm_defconfig
  ARM: add SMP support for Broadcom mobile SoCs
  Documentation: arm: misc updates to Marvell EBU SoC status
  Documentation: arm: add URLs to public datasheets for the Marvell Armada XP SoC
  ARM: mvebu: fix build without platforms selected
  ARM: mvebu: add cpuidle support for Armada 38x
  ARM: mvebu: add cpuidle support for Armada 370
  cpuidle: mvebu: add Armada 38x support
  cpuidle: mvebu: add Armada 370 support
  cpuidle: mvebu: rename the driver from armada-370-xp to mvebu-v7
  ARM: mvebu: export the SCU address
  ...
2014-08-08 11:14:29 -07:00
David Rientjes 8d060bf490 mm, oom: ensure memoryless node zonelist always includes zones
With memoryless node support being worked on, it's possible that for
optimizations that a node may not have a non-NULL zonelist.  When
CONFIG_NUMA is enabled and node 0 is memoryless, this means the zonelist
for first_online_node may become NULL.

The oom killer requires a zonelist that includes all memory zones for
the sysrq trigger and pagefault out of memory handler.

Ensure that a non-NULL zonelist is always passed to the oom killer.

[akpm@linux-foundation.org: fix non-numa build]
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:21 -07:00
Linus Torvalds 049711bf3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:

 1) Add sparc RAM output to /proc/iomem, from Bob Picco.

 2) Allow seeks on /dev/mdesc, from Khalid Aziz.

 3) Cleanup sparc64 I/O accessors, from Sam Ravnborg.

 4) If update_mmu_cache{,_pmd}() is called with an not-valid mapping, do
    not insert it into the TLB miss hash tables otherwise we'll
    livelock.  Based upon work by Christopher Alexander Tobias Schulze.

 5) Fix BREAK detection in sunsab driver when no actual characters are
    pending, from Christopher Alexander Tobias Schulze.

 6) Because we have modules --> openfirmware --> vmalloc ordering of
    virtual memory, the lazy VMAP TLB flusher can cons up an invocation
    of flush_tlb_kernel_range() that covers the openfirmware address
    range.  Unfortunately this will flush out the firmware's locked TLB
    mapping which causes all kinds of trouble.  Just split up the flush
    request if this happens, but in the long term the lazy VMAP flusher
    should probably be made a little bit smarter.

    Based upon work by Christopher Alexander Tobias Schulze.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc64: Fix up merge thinko.
  sparc: Add "install" target
  arch/sparc/math-emu/math_32.c: drop stray break operator
  sparc64: ldc_connect() should not return EINVAL when handshake is in progress.
  sparc64: Guard against flushing openfirmware mappings.
  sunsab: Fix detection of BREAK on sunsab serial console
  bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000
  sparc64: Do not insert non-valid PTEs into the TSB hash table.
  sparc64: avoid code duplication in io_64.h
  sparc64: reorder functions in io_64.h
  sparc64: drop unused SLOW_DOWN_IO definitions
  sparc64: remove macro indirection in io_64.h
  sparc64: update IO access functions in PeeCeeI
  sparcspkr: use sbus_*() primitives for IO
  sparc: Add support for seek and shorter read to /dev/mdesc
  sparc: use %s for unaligned panic
  drivers/sbus/char: Micro-optimization in display7seg.c
  display7seg: Introduce the use of the managed version of kzalloc
  sparc64 - add mem to iomem resource
2014-08-06 09:41:23 -07:00
Linus Torvalds ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00
Christopher Alexander Tobias Schulze fe418231b1 sunsab: Fix detection of BREAK on sunsab serial console
Fix detection of BREAK on sunsab serial console: BREAK detection was only
performed when there were also serial characters received simultaneously.
To handle all BREAKs correctly, the check for BREAK and the corresponding
call to uart_handle_break() must also be done if count == 0, therefore
duplicate this code fragment and pull it out of the loop over the received
characters.

Patch applies to 3.16-rc6.

Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 17:01:49 -07:00
xinhui.pan 5a64096700 tty/n_gsm.c: fix a memory leak in gsmld_open
If gsmld_attach_gsm fails, the gsm is not used anymore.
tty core will not call gsmld_close to do the cleanup work.
tty core just restore to the tty old ldisc.
That always causes memory leak.

Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com>
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:54 -07:00
Andy Shevchenko 8368d6a2b7 pch_uart: don't hardcode PCI slot to get DMA device
The DMA is a function 0 of the multifunction device where SPI host is attached.
Thus, we may avoid to hardcode PCI slot number.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:21 -07:00
Jiri Slaby c62fd1d9f0 tty: n_gsm, use setup_timer
Just a simple cleanup of init_timer with setting the fields manually.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-01 16:04:21 -07:00
Jon Ringle dc824ebed0 serial: sc16is7xx: Correct initialization of s->clk
The s->clk never gets setup in sc16is7xx_probe() and instead was using a
local clk variable, but then testing the uninitialized s->clk during
teardown

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 11:50:38 -07:00
Chen-Yu Tsai c8ed99d4f6 serial: 8250_dw: Add support for deferred probing
The 8250_dw driver fails to probe if the specified clock isn't
registered at probe time. Even if a clock frequency is given,
the required clock might be gated because it wasn't properly
enabled.

This happened to me when the device is registered through DT,
and the clock was part of an MFD, the PRCM found on A31 and A23
SoCs. Unlike core clocks that are registered with OF_CLK_DECLARE,
which happen almost immediately after the kernel starts, the
clocks are registered as sub-devices of the PRCM MFD platform
device. Even though devices are registered in the order they are
found in the DT, the drivers are registered in a different,
arbitrary order. It is possible that the 8250_dw driver is
registered, and thus associated with the device and probed, before
the clock driver is registered and probed.

8250_dw then reports unable to get the clock, and fails. Without
a working console, the kernel panics.

This patch adds support for deferred probe handling for the clock
and reset controller. It also fixes the cleanup path if
serial8250_register_8250_port fails.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 11:07:08 -07:00
Chen-Yu Tsai 7fe090bf48 serial: 8250_dw: Add optional reset control support
The Allwinner A31 and A23 SoCs have a reset controller
maintaining the UART in reset by default.

This patch adds optional reset support to the driver.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 11:07:07 -07:00
Maxime COQUELIN 1d6ba284df serial: st-asc: Fix overflow in baudrate calculation
In the current calculation, if the required baud rate is above 262143,
we get an overflow.

This patch uses a 64bits variable to do the maths.
Also, we remove the '+1' to avoid a divide by zero if the input clock
rate is something unexpected.
Indeed, if the input clock rate is zero, it is preferable to be notified,
since the UART won't work anyway.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 11:05:08 -07:00
Maxime COQUELIN 5b4e79ae45 serial: st-asc: Don't call BUG in asc_console_setup()
In order to prevent an asc instance to be used as early console, BUG_ON is
used on either mapbase or membase being NULL.

Problem is that this condition is also true when we set console to be a ttyASx
different to the first asc instance being probed.

Instead of calling BUG_ON, it now returns -ENXIO when either mapbase or
membase is NULL.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 11:05:08 -07:00
Kiran Padwal af300539de tty: serial: msm: Make of_device_id array const
Make of_device_id array const, because all OF functions handle it as const.

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23 18:56:18 -07:00
xinhui.pan 850e93eb29 tty/n_gsm.c: get gsm->num after gsm_activate_mux
gsm->num is the index of gsm_mux[], it's invalid before calling gsm_activate_mux.

Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23 18:56:17 -07:00
Yoshihiro YUNOMAE c2b703b807 serial/core: Fix too big allocation for attribute member
Current code allocates too much data for tty_groups member of uart_port struct,
so fix it.

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23 18:56:17 -07:00
Wolfram Sang 48479148a2 drivers/tty/serial: use correct type for dma_map/unmap
dma_{un}map_* uses 'enum dma_data_direction' not 'enum dma_transfer_direction'.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-22 16:34:33 -07:00
Tobias Klauser 2fbe6c5e3e serial: altera_jtaguart: Fix putchar function passed to uart_console_write()
Commit 3d1c90d48c ("serial: altera_jtaguart: Adpot
uart_console_write()") introduced the usage of uart_console_write() but
didn't change the signature of altera_jtaguart_console_putc() to take a
pointer to struct uart_port instead of struct console, breaking the
driver's console support and leading to the following warning:

>    drivers/tty/serial/altera_jtaguart.c: In function 'altera_jtaguart_console_write':
> >> drivers/tty/serial/altera_jtaguart.c:350:2: warning: passing argument 4 of 'uart_console_write' from incompatible pointer type [enabled by default]
>      uart_console_write(port, s, count, altera_jtaguart_console_putc);
>      ^
>    In file included from drivers/tty/serial/altera_jtaguart.c:25:0:
>    include/linux/serial_core.h:317:6: note: expected 'void (*)(struct uart_port *, int)' but argument is of type 'void (*)(struct console *, int)'
>     void uart_console_write(struct uart_port *port, const char *s,

Fix this by adjusting the signature of altera_jtaguart_console_putc()
accordingly.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-22 16:34:33 -07:00
Tomasz Figa f73d4cb681 serial: samsung: Remove support for legacy clock code
All Samsung platforms are now using the Common Clock Framework and the
legacy clock code is being removed, so remove related dead code from
samsung-serial driver as well.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-19 04:24:59 +09:00
Yoshihiro YUNOMAE aef9a7bd9b serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
Add tunable RX interrupt trigger I/F of FIFO buffers.

Serial devices are used as not only message communication devices but control
or sending communication devices. For the latter uses, normally small data
will be exchanged, so user applications want to receive data unit as soon as
possible for real-time tendency. If we have a sensor which sends a 1 byte data
each time and must control a device based on the sensor feedback, the RX
interrupt should be triggered for each data.

According to HW specification of serial UART devices, RX interrupt trigger
can be changed, but the trigger is hard-coded. For example, RX interrupt trigger
in 16550A can be set to 1, 4, 8, or 14 bytes for HW, but current driver sets
the trigger to only 8bytes.

This patch makes some devices change RX interrupt trigger from userland.

<How to use>
- Read current setting
 # cat /sys/class/tty/ttyS0/rx_trig_bytes
 8

- Write user setting
 # echo 1 > /sys/class/tty/ttyS0/rx_trig_bytes
 # cat /sys/class/tty/ttyS0/rx_trig_bytes
 1

<Support uart devices>
- 16550A and Tegra (1, 4, 8, or 14 bytes)
- 16650V2 (8, 16, 24, or 28 bytes)
- 16654 (8, 16, 56, or 60 bytes)
- 16750 (1, 16, 32, or 56 bytes)

<Change log>
Changes in V9:
 - Use attr_group instead of dev_spec_attr_group of uart_port structure

Changes in V8:
 - Divide this patch from V7's patch based on Greg's comment

Changes in V7:
 - Add Documentation
 - Change I/F name from rx_int_trig to rx_trig_bytes because the name
   rx_int_trig is hard to understand how users specify the value

Changes in V6:
 - Move FCR_RX_TRIG_* definition in 8250.h to include/uapi/linux/serial_reg.h,
   rename those to UART_FCR_R_TRIG_*, and use UART_FCR_TRIGGER_MASK to
   UART_FCR_R_TRIG_BITS()
 - Change following function names:
    convert_fcr2val() => fcr_get_rxtrig_bytes()
    convert_val2rxtrig() => bytes_to_fcr_rxtrig()
 - Fix typo in serial8250_do_set_termios()
 - Delete the verbose error message pr_info() in bytes_to_fcr_rxtrig()
 - Rename *rx_int_trig/rx_trig* to *rxtrig* for several functions or variables
   (but UI remains rx_int_trig)
 - Change the meaningless variable name 'val' to 'bytes' following functions:
    fcr_get_rxtrig_bytes(), bytes_to_fcr_rxtrig(), do_set_rxtrig(),
    do_serial8250_set_rxtrig(), and serial8250_set_attr_rxtrig()
 - Use up->fcr in order to get rxtrig_bytes instead of rx_trig_raw in
   fcr_get_rxtrig_bytes()
 - Use conf_type->rxtrig_bytes[0] instead of switch statement for support check
   in register_dev_spec_attr_grp()
 - Delete the checking whether a user changed FCR or not when minimum buffer
   is needed in serial8250_do_set_termios()

Changes in V5.1:
 - Fix FCR_RX_TRIG_MAX_STATE definition

Changes in V5:
 - Support Tegra, 16650V2, 16654, and 16750
 - Store default FCR value to up->fcr when the port is first created
 - Add rx_trig_byte[] in uart_config[] for each device and use rx_trig_byte[]
   in convert_fcr2val() and convert_val2rxtrig()

Changes in V4:
 - Introduce fifo_bug flag in uart_8250_port structure
   This is enabled only when parity is enabled and UART_BUG_PARITY is enabled
   for up->bugs. If this flag is enabled, user cannot set RX trigger.
 - Return -EOPNOTSUPP when it does not support device at convert_fcr2val() and
   at convert_val2rxtrig()
 - Set the nearest lower RX trigger when users input a meaningless value at
   convert_val2rxtrig()
 - Check whether p->fcr is existing at serial8250_clear_and_reinit_fifos()
 - Set fcr = up->fcr in the begging of serial8250_do_set_termios()

Changes in V3:
 - Change I/F from ioctl(2) to sysfs(rx_int_trig)

Changed in V2:
 - Use _IOW for TIOCSFIFORTRIG definition
 - Pass the interrupt trigger value itself

Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:23:35 -07:00
Greg Kroah-Hartman 266dcff03e Serial: allow port drivers to have a default attribute group
Some serial drivers (like 8250), want to add sysfs files.  We need to do
so in a race-free way, so allow any port to be able to specify an
attribute group that should be added at device creation time.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:21:21 -07:00
Daniel Thompson c8b29f049e tty: kgdb_nmi: Automatically manage tty enable
At present it is not possible to boot with the ttyNMI0 console treating
character input normally, instead character input triggers a prompt
telling the user how to trigger the knock detector and enter the
debugger. To use the console normally requires that kdb be entered and
the nmi_console command be used to enable the console (or if only kgdb
is present then gdb must directly manipulate the value of
kgdb_nmi_tty_enabled).

This patch automates the management of kgdb_nmi_tty_enabled by keeping
track of the number of file handles that are open for reading and using
that to determine how to tty should operate.

The approach means that:

1. Behaviour before init starts is unchanged.

2. If the userspace runs a getty or some other interactive process on
   /dev/console (or explicitly on /dev/ttyNMI0) the tty will treat
   character input like any other tty.

3. If the userspace doesn't use /dev/console or if it uses /dev/console
   only to log messages (O_WRONLY) then the user prompt is retained.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:19:40 -07:00
Tobias Klauser 3d1c90d48c serial: altera_jtaguart: Adpot uart_console_write()
Follow commit 2970b7f5ea ("serial: altera: Adopt
uart_console_write()") and don't open code the LF to LFCR conversion in
altera_jtaguart either. Use uart_console_write() instead.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:19:40 -07:00
Naveen Krishna Chatradhi 4622eb6873 serial: samsung: improve code clarity by defining a variable
The of_node is derived from pdev for every usage, define a
device_node variable instead.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:18:22 -07:00
Naveen Krishna Chatradhi 3bcce591aa serial: samsung: correct the case and default order in switch
The cases should comes before default in a switch.

Even if we want the case and default to share same code.
Its good to define the case first followed by default.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:18:22 -07:00
Naveen Krishna Chatradhi 135f07c325 serial: samsung: get fifosize via device tree
UART modules on some SoCs only differ in the fifosize of each
UART channel. Its useless to duplicate the drv_data structure
or create a compatible name for such a change.

We can get fifosize via the device tree nodes (not mandating it).

Also updates the documentation.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:18:22 -07:00
Andy Shevchenko b1261c86fe serial: 8250: introduce up_to_u8250p() helper
It helps to cast struct uart_port to struct uart_8250_port at runtime.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:16:23 -07:00
Jingchang Lu 380c966c09 tty: serial: fsl_lpuart: add 32-bit register interface support
This add the 32-bit register version LPUART support with big-endian
byte order.

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:15:38 -07:00
Nobuhiro Iwamatsu 730c4e782c serial: sh-sci: Add calculation recive margin for HSCIF
When the error of the same bit rate is detected, we will need to select
the recive margin is large. Current code holds the minimum error, it does
not have to check the recive margin. This adds this calculation.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:14:44 -07:00
Nobuhiro Iwamatsu bcb9973a60 serial: sh-sci: Fix range check of bit-rate for HSCIF
If bit-rate calculation result of HSCIF is expect 255 from 0,
driver does not calculate error bit. However, we need to round
the value to calculate error bit in the case of negative value.
This rounds the value of bit-rate using clamp(), and bit-rate is the
case of negative value, it enables the calculation of the error bit.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:14:44 -07:00
Nobuhiro Iwamatsu b7d66397f4 serial: sh-sci: Updated calculation of bit error rate and bit rate
Currently, the decimal point is discarded calculation of BRR.
Therefore, it can not calculate a value close to the correct value.
This patch fixes this problem by using DIV_ROUND_CLOSEST.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-17 18:14:44 -07:00
David S. Miller 1a98c69af1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16 14:09:34 -07:00
Tom Gundersen c835a67733 net: set name_assign_type in alloc_netdev()
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit

Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:12:48 -07:00
Greg Kroah-Hartman ca17749259 Merge 3.16-rc5 into tty-next.
We want those fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13 15:52:12 -07:00
Rasmus Villemoes 07584d4a35 drivers: tty: Fix use-after-free in pty_common_install
In 2c964a2f "drivers: tty: Merge alloc_tty_struct and
initialize_tty_struct", I messed up the refactorization of
pty_common_install, causing use-after-free and NULL pointer derefs on
various error paths. This should fix it.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-12 17:21:47 -07:00
Rasmus Villemoes 2c964a2f41 drivers: tty: Merge alloc_tty_struct and initialize_tty_struct
The two functions alloc_tty_struct and initialize_tty_struct are
always called together. Merge them into alloc_tty_struct, updating its
prototype and the only two callers of these functions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:54:28 -07:00
Geert Uytterhoeven 493671a2ce serial: pch_uart: Update error message for dmaengine_prep_slave_sg() API
Commit 16052827d9 ("dmaengine/dma_slave:
introduce inline wrappers") changed the code to use the new API, but forgot
to update an error message.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-serial@vger.kernel.org
--
v2:
  - New
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:49:46 -07:00
Vineet Gupta f363ca2fc8 serial/arc: Fix warning with CONSOLE_POLL
| drivers/tty/serial/arc_uart.c:516:2: warning: (near initialization for 'arc_serial_pops.poll_put_char') [enabled by default]

This partially undoes "serial/arc: use uart_console_write() helper" by
restoring the prototpye of poll helper and use a different one in
uart_console_write()

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:49:46 -07:00
Daniel Thompson 2970b7f5ea serial: altera: Adopt uart_console_write()
This driver does not currently use uart_console_write() and instead
provides is own LF to LFCR conversion in it's console_write() method.
We should use the library function instead.

Cmopile tested only (with ARCH=arm).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:49:46 -07:00
Uwe Kleine-König d36f47fa84 serial: efm32: correct namespacing of location property
Olof Johansson pointed out that usually the company name is picked as
namespace prefix to specific properties. So expect "energymicro,location"
but fall back to the previously introduced name "efm32,location".

Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:49:46 -07:00
Peter Hurley 8bec751bd6 serial: imx: Fix build breakage
Fix breakage introduced by
commit c557d392fb,
'serial: Test for no tx data on tx restart'.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-11 17:43:13 -07:00
Peter Hurley 99ecb001f5 serial: arc_uart: Use uart_circ_empty() for open-coded comparison
Replace open-coded test for empty tx ring buffer with equivalent
helper function, uart_circ_empty(). No functional change.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 16:31:34 -07:00
Peter Hurley c557d392fb serial: Test for no tx data on tx restart
Commit 717f3bbab3,
'serial_core: Fix conditional start_tx on ring buffer not empty'
exposes an incorrect assumption in several drivers' start_tx methods;
the tx ring buffer can, in fact, be empty when restarting tx while
performing flow control.

Affected drivers:
sunsab.c
ip22zilog.c
pmac_zilog.c
sunzilog.c
m32r_sio.c
imx.c

Other in-tree serial drivers either are not affected or already
test for empty tx ring buffer before transmitting.

Test for empty tx ring buffer in start_tx() method, after transmitting
x_char (if applicable).

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Seth Bollinger <sethb@digi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: stable <stable@vger.kernel.org> # 3.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 16:31:34 -07:00