Граф коммитов

37 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 5d26c176d5 - Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
 
 - Remove the notify ops as it is no longer used (Daniel Lezcano)
 
 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)
 
 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this
   macro (Daniel Lezcano)
 
 - Rework the delays to make them pre-computed instead of computing
   them again and again at each polling interval (Daniel Lezcano)
 
 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)
 
 - Use the critical and hot ops to prevent an unexpected system
   shutdown on int340x (Kai-Heng Feng)
 
 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)
 
 - Prevent to use not-power-aware actor devices with the power
   allocator governor (Lukasz Luba)
 
 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)
 
 - Fix several issues on the Omap thermal driver (Tony Lindgren)
 
 - Add support for adc-tm5 PMIC thermal monitor for Qcom
   platforms. Please note those changes rely on an immutable branch:
   iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
   (Dmitry Baryshkov)
 
 - Fix an initialization loop in the adc-tm5 (Colin Ian King)
 
 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmAvkKMACgkQqDIjiipP
 6E9yFggAmXy8t2j1mRvn/KLU+teTGIoSFkZ8mBnY2Sgip97IRZRhCwAZbUKOW0eI
 bvpAzBjacxdZHT7OxxvGzCOq/zlAh4UoStI8bMpzdUWPdkAj4ippArLYGvagLym8
 WEQysWnrr8V1RCZbQuBNjyLwjf0fcXkzIBU1mbZXA8T8Y6Yn646TdtsrVT4Idg1j
 MOg7PAHBcTSY/wOReZKJ5TB1yvo2tNOuGOqUVbrIAHlRkiNTVHirVUq6aZGtTTKp
 7ukcu8EI/o7XKBdQ5d9MZaHdwkcyAIJj4jdjmjkUJpa8VYQFPjayNyN3I+Py9lH2
 jtWVYHQxZbY166IZP2yeXFjPzd6elw==
 =Jmz4
 -----END PGP SIGNATURE-----

Merge tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Use the newly introduced 'hot' and 'critical' ops for the acpi
   thermal driver (Daniel Lezcano)

 - Remove the notify ops as it is no longer used (Daniel Lezcano)

 - Remove the 'forced passive' option and the unused bind/unbind
   functions (Daniel Lezcano)

 - Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
   (Daniel Lezcano)

 - Rework the delays to make them pre-computed instead of computing them
   again and again at each polling interval (Daniel Lezcano)

 - Remove the pointless 'thermal_zone_device_reset' function (Daniel
   Lezcano)

 - Use the critical and hot ops to prevent an unexpected system shutdown
   on int340x (Kai-Heng Feng)

 - Make the cooling device state private to the thermal subsystem
   (Daniel Lezcano)

 - Prevent to use not-power-aware actor devices with the power allocator
   governor (Lukasz Luba)

 - Remove 'zx' and 'tango' support along with the corresponding
   platforms (Arnd Bergman)

 - Fix several issues on the Omap thermal driver (Tony Lindgren)

 - Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
   (Dmitry Baryshkov)

 - Fix an initialization loop in the adc-tm5 (Colin Ian King)

 - Fix a return error check in the cpufreq cooling device (Viresh Kumar)

* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
  thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
  thermal: qcom: Fix comparison with uninitialized variable channels_available
  thermal: qcom: add support for adc-tm5 PMIC thermal monitor
  dt-bindings: thermal: qcom: add adc-thermal monitor bindings
  thermal: ti-soc-thermal: Use non-inverted define for omap4
  thermal: ti-soc-thermal: Simplify polling with iopoll
  thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
  thermal: ti-soc-thermal: Skip pointless register access for dra7
  thermal/drivers/zx: Remove zx driver
  thermal/drivers/tango: Remove tango driver
  thermal: power allocator: fail binding for non-power actor devices
  thermal/core: Make cooling device state change private
  thermal: intel: pch: Fix unexpected shutdown at critical temperature
  thermal: int340x: Fix unexpected shutdown at critical temperature
  thermal/core: Remove pointless thermal_zone_device_reset() function
  thermal/core: Remove ms based delay fields
  thermal/core: Use precomputed jiffies for the polling
  thermal/core: Precompute the delays from msecs to jiffies
  thermal/core: Remove unused macro THERMAL_TRIPS_NONE
  thermal/core: Remove THERMAL_TRIPS_NONE test
  ...
2021-02-22 09:39:11 -08:00
Uwe Kleine-König 86585c6197 hwmon: (pwm-fan) stop using legacy PWM functions and some cleanups
pwm_apply_state() does what the legacy functions pwm_config() and
pwm_{en,dis}able() do in a single function call. This simplifies error
handling and is more efficient for new-style PWM hardware drivers.

Instead of repeatedly querying the PWM framework about the initial PWM
configuration, cache the settings in driver data.

Also use __set_pwm() in .probe() to have the algorithm calculating the PWM
state in a single place.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210112191314.124686-1-u.kleine-koenig@pengutronix.de
[groeck: Added missing empty line after declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:19 -08:00
Paul Barker f0dc7cb6b4 hwmon: (pwm-fan) Support multiple fan tachometers
The pwm-fan driver is extended to support multiple fan tachometer
signals connected to GPIO inputs. This is intended to support the case
where a single PWM output signal is routed to multiple fans, each of
which have a tachometer output connected back to a GPIO pin.

The number of fan tachometer inputs is determined by the number of
interrupt sources configured for the pwm-fan device. The number of
pulses-per-revolution entries should match the number of interrupt
sources so that each input has a value assigned.

The fan tachometer measurements are exposed as sysfs files fan1_input,
fan2_input, etc up to the number of configured inputs.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201212195008.6036-3-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Paul Barker 01695410d4 hwmon: (pwm-fan) Store tach data separately
The data for the (optional) fan tachometer input is moved to a separate
structure which is only allocated if an input is actually configured.

After this change the pulse IRQ handler takes a pointer to the
tachometer data structure instead of the whole device context.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201212195008.6036-2-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-01-27 17:44:18 -08:00
Daniel Lezcano 23ff8529ee thermal/core: Make cooling device state change private
The change of the cooling device state should be used by the governor
or at least by the core code, not by the drivers themselves.

Remove the API usage and move the function declaration to the internal
headers.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20210118173824.9970-1-daniel.lezcano@linaro.org
2021-01-19 22:31:10 +01:00
Uwe Kleine-König 1eda52334e hwmon: (pwm-fan) Ensure that calculation doesn't discard big period values
With MAX_PWM being defined to 255 the code

	unsigned long period;
	...
	period = ctx->pwm->args.period;
	state.duty_cycle = DIV_ROUND_UP(pwm * (period - 1), MAX_PWM);

calculates a too small value for duty_cycle if the configured period is
big (either by discarding the 64 bit value ctx->pwm->args.period or by
overflowing the multiplication). As this results in a too slow fan and
so maybe an overheating machine better be safe than sorry and error out
in .probe.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20201215092031.152243-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-30 08:21:04 -08:00
Paul Barker 1aa0365574 hwmon: (pwm-fan) Convert to hwmon_device_register_with_info API
The pwm-fan driver is updated to use the recommended API.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
[groeck: Dropped unused variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02 17:42:24 -08:00
Paul Barker b5fcb8a401 hwmon: pwm-fan: Refactor pwm_fan_probe
Use platform_irq_count to determine the number of fan tachometer inputs
configured in the device tree. At this stage we support either 0 or 1
inputs.

Once we have this information we only need to read the
pulses-per-revolution value if a fan tachometer is actually configured
via an IRQ value.

Also add a debug print of the IRQ number and the pulses-per-revolution
value to aid in investigating issues.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201126174408.755-2-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-12-02 17:42:24 -08:00
Paul Barker fd8feec665 hwmon: (pwm-fan) Fix RPM calculation
To convert the number of pulses counted into an RPM estimation, we need
to divide by the width of our measurement interval instead of
multiplying by it. If the width of the measurement interval is zero we
don't update the RPM value to avoid dividing by zero.

We also don't need to do 64-bit division, with 32-bits we can handle a
fan running at over 4 million RPM.

Signed-off-by: Paul Barker <pbarker@konsulko.com>
Link: https://lore.kernel.org/r/20201111164643.7087-1-pbarker@konsulko.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-11-12 07:00:54 -08:00
Anson Huang 65b2aad069 hwmon: (pwm-fan) Use dev_err_probe() to simplify error handling
dev_err_probe() can reduce code size, uniform error handling and record the
defer probe reason etc., use it to simplify the code.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Link: https://lore.kernel.org/r/1597649673-22329-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:40 -07:00
Guru Das Srinagesh f3e4b14144 hwmon: pwm-fan: Use 64-bit division macro
Since the PWM framework is switching struct pwm_args.period's datatype
to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle
a 64-bit dividend.

Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-16 11:16:08 +02:00
Akinobu Mita 7992db7cb9 hwmon: (pwm-fan) stop fan on shutdown
The pwm-fan driver stops the fan in suspend but leaves the fan on in
shutdown.  It seems strange to leave the fan on in shutdown because there
is no use case in my mind and the gpio-fan driver on the other hand stops
in shutdown.

This change turns off the fan in shutdown.  If anyone complains then we'll
add an optional property to switch the behavior.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kamil Debski <kamil@wypas.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/1579534344-11694-1-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 13:15:11 -08:00
Thierry Reding 6e7e5c7fbc hwmon: pwm-fan: Use platform_get_irq_optional()
The PWM fan interrupt is optional, so we don't want an error message in
the kernel log if it wasn't specified.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://lore.kernel.org/r/20190828083411.2496-2-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-28 22:52:30 +02:00
Guenter Roeck 5696e4aaab hwmon: (pwm-fan) Check return value from devm_add_action_or_reset
devm_add_action_or_reset() can fail due to a memory allocation failure.
Check for it and return the error if that happens.

Fixes: 37bcec5d9f ("hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-06-23 18:32:34 -07:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Linus Torvalds a455eda33f Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal soc updates from Eduardo Valentin:

 - thermal core has a new devm_* API for registering cooling devices. I
   took the entire series, that is why you see changes on drivers/hwmon
   in this pull (Guenter Roeck)

 - rockchip thermal driver gains support to PX30 SoC (Elaine Zhang)

 - the generic-adc thermal driver now considers the lookup table DT
   property as optional (Jean-Francois Dagenais)

 - Refactoring of tsens thermal driver (Amit Kucheria)

 - Cleanups on cpu cooling driver (Daniel Lezcano)

 - broadcom thermal driver dropped support to ACPI (Srinath Mannam)

 - tegra thermal driver gains support to OC hw throttle and GPU throtle
   (Wei Ni)

 - Fixes in several thermal drivers.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (59 commits)
  hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register
  hwmon: (npcm750-pwm-fan) Use devm_thermal_of_cooling_device_register
  hwmon: (mlxreg-fan) Use devm_thermal_of_cooling_device_register
  hwmon: (gpio-fan) Use devm_thermal_of_cooling_device_register
  hwmon: (aspeed-pwm-tacho) Use devm_thermal_of_cooling_device_register
  thermal: rcar_gen3_thermal: Fix to show correct trip points number
  thermal: rcar_thermal: update calculation formula for R-Car Gen3 SoCs
  thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
  thermal: rockchip: Support the PX30 SoC in thermal driver
  dt-bindings: rockchip-thermal: Support the PX30 SoC compatible
  thermal: rockchip: fix up the tsadc pinctrl setting error
  thermal: broadcom: Remove ACPI support
  thermal: Fix build error of missing devm_ioremap_resource on UM
  thermal/drivers/cpu_cooling: Remove pointless field
  thermal/drivers/cpu_cooling: Add Software Package Data Exchange (SPDX)
  thermal/drivers/cpu_cooling: Fixup the header and copyright
  thermal/drivers/cpu_cooling: Remove pointless test in power2state()
  thermal: rcar_gen3_thermal: disable interrupt in .remove
  thermal: rcar_gen3_thermal: fix interrupt type
  thermal: Introduce devm_thermal_of_cooling_device_register
  ...
2019-05-16 07:56:57 -07:00
Guenter Roeck 37bcec5d9f hwmon: (pwm-fan) Use devm_thermal_of_cooling_device_register
Use devm_thermal_of_cooling_device_register() to register the cooling
device. Also use devm_add_action_or_reset() to stop the fan on device
removal, and to disable the pwm. Introduce a local 'dev' variable in
the probe function to make the code easier to read.

As a side effect, this fixes a bug seen if pwm_fan_of_get_cooling_data()
returned an error. In that situation, the pwm was not disabled, and
the fan was not stopped. Using devm functions also ensures that the
pwm is disabled and that the fan is stopped only after the hwmon device
has been unregistered.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14 07:00:47 -07:00
Robin Murphy 841cf6767b hwmon: (pwm-fan) Report probe errors consistently
Printing the error code for a failure provides a head-start for
debugging, since it's often sufficient to pinpoint the origin of the
failure. We already do this for some probe-failure messages, so let's
make the rest of them consistent.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-15 17:19:53 -07:00
Stefan Wahren 6b1ec4789f hwmon: (pwm-fan) Add RPM support via external interrupt
This adds RPM support to the pwm-fan driver in order to use with
fancontrol/pwmconfig. This feature is intended for fans with a tachometer
output signal, which generate a defined number of pulses per revolution.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[groeck: Drop unused 'devattr' variable]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-15 17:19:53 -07:00
Stefan Wahren 53f1647da3 hwmon: (pwm-fan) Disable PWM if fetching cooling data fails
In case pwm_fan_of_get_cooling_data() fails we should disable the PWM
just like in the other error cases.

Fixes: 2e5219c771 ("hwmon: (pwm-fan) Read PWM FAN configuration from device tree")
Cc: <stable@vger.kernel.org> # 4.14+
Reported-by: Guenter Rock <linux@roeck-us.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-15 17:19:23 -07:00
Stefan Wahren b57e1d4293 hwmon: (pwm-fan) Add optional regulator support
This adds optional regulator support to the pwm-fan driver. This is
necessary for pwm fans which are powered by a switchable supply.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-23 09:02:23 -08:00
Guenter Roeck cb1d85341f hwmon: (pwm-fan) Auto-convert to use SENSOR_DEVICE_ATTR_{RO, RW, WO}
Conversion was done done using the coccinelle script at
https://github.com/groeck/coccinelle-patches/raw/master/hwmon/sensor-devattr-w6.cocci

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-12-16 15:13:27 -08:00
Thierry Reding 95dcd64bc5 hwmon: (pwm-fan) Set fan speed to 0 on suspend
Technically this is not required because disabling the PWM should be
enough. However, when support for atomic operations was implemented in
the PWM subsystem, only actual changes to the PWM channel are applied
during pwm_config(), which means that during after resume from suspend
the old settings won't be applied.

One possible solution is for the PWM driver to implement its own PM
operations such that settings from before suspend get applied on resume.
This has the disadvantage of completely ignoring any particular ordering
requirements that PWM user drivers might have, so it is best to leave it
up to the user drivers to apply the settings that they want at the
appropriate time.

Another way to solve this would be to read back the current state of the
PWM at the time of resume. That way, in case the configuration was lost
during suspend, applying the old settings in PWM user drivers would
actually get them applied because they differ from the current settings.
However, not all PWM drivers support reading the hardware state, and not
all hardware may support it.

The best workaround at this point seems to be to let PWM user drivers
tell the PWM subsystem that the PWM is turned off by, in addition to
disabling it, also setting the duty cycle to 0. This causes the resume
operation to apply a configuration that is different from the current
configuration, resulting in the proper state from before suspend getting
restored.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Thierry Reding 9f67f7583e hwmon: (pwm-fan) Silence error on probe deferral
Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-10 20:37:13 -07:00
Kees Cook a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Bartlomiej Zolnierkiewicz 677252a185 hwmon: (pwm-fan) Switch to new atomic PWM API
Switch pwm-fan driver to new atomic PWM API.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Boris Brezillon 2289711c9d hwmon: pwm-fan: Use pwm_get_args() where appropriate
The PWM framework has clarified the concept of reference PWM config (the
platform dependent config retrieved from the DT or the PWM lookup table)
and real PWM state.

Use pwm_get_args() when the PWM user wants to retrieve this reference
config and not the current state.

This is part of the rework allowing the PWM framework to support
hardware readout and expose real PWM state even when the PWM has just
been requested (before the user calls pwm_config/enable/disable()).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17 14:45:00 +02:00
Luis de Bethencourt f491e70ccf hwmon: (pwm-fan) Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-09-20 17:50:19 -07:00
Anand Moon f354169e0f hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan
pwm_config() must be called with a duty cycle of 0 prior to calling
pwm_disable() to ensure that the pwm signal is set to low.

Reported-by: Markus Reichl <m.reichl@fivetechno.de>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-12 15:59:11 -07:00
Fabian Frederick d720acace4 hwmon: (pwm-fan, vexpress) Constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-16 13:00:32 -07:00
Guenter Roeck de52b049d6 hwmon: (pwm-fan) Declare pwm_fan_of_get_cooling_data static
Address the following sparse warnings.

drivers/hwmon/pwm-fan.c:176:5: warning:
	symbol 'pwm_fan_of_get_cooling_data' was not declared. Should it be static?
drivers/hwmon/pwm-fan.c:176:5: warning:
	no previous prototype for 'pwm_fan_of_get_cooling_data'

pwm_fan_of_get_cooling_data is only used in the pwm-fan driver and thus should
be declared static.

Cc: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski b6bddec019 hwmon: (pwm-fan) Add support for using PWM FAN as a cooling device
The PWM FAN device can now be used as a thermal cooling device.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski 2e5219c771 hwmon: (pwm-fan) Read PWM FAN configuration from device tree
This patch provides code for reading PWM FAN configuration data via
device tree. The pwm-fan can work with full speed when configuration
is not provided. However, errors are propagated when wrong DT bindings
are found.
Additionally the struct pwm_fan_ctx has been extended.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Lukasz Majewski cb85ca332f hwmon: (pwm-fan) Extract __set_pwm() function to only modify PWM duty cycle
It was necessary to decouple code handling writing to sysfs from the one
responsible for setting PWM of the fan.
Due to that, new __set_pwm() method was extracted, which is responsible for
only setting new PWM duty cycle.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Kamil Debski 48b9d5b4f4 hwmon: (pwm-fan) Fix suspend/resume behavior
The state of a PWM output is not clearly defined after resume. Some PWM
drivers do not restore the duty cycle upon resume, thus it is necessary to
manually restore the correct value.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-11-11 10:39:45 -08:00
Axel Lin 4e8e75f6a4 hwmon: (pwm-fan) Remove duplicate dev_set_drvdata call
The dev_set_drvdata() call is equivalent to the platform_set_drvdata() call in
next line.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:40 -07:00
Kamil Debski d82d57767c hwmon: Add pwm-fan driver
The pwm-fan driver enables control of fans connected to PWM lines.
This driver uses the PWM framework, so it is compatible with all
PWM devices that provide drivers through the PWM framework.

Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Varka Bhadram <varkabhadram@gmail.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
[Guenter Roeck: Last argument to devm_of_pwm_get is pointer, use NULL]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04 07:01:38 -07:00