There are cases where the page_pool need to refill with pages from the
page allocator. Some workloads cause the page_pool to release pages
instead of recycling these pages.
For these workload it can improve performance to bulk alloc pages from the
page-allocator to refill the alloc cache.
For XDP-redirect workload with 100G mlx5 driver (that use page_pool)
redirecting xdp_frame packets into a veth, that does XDP_PASS to create an
SKB from the xdp_frame, which then cannot return the page to the
page_pool.
Performance results under GitHub xdp-project[1]:
[1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org
Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array
variant" was squashed with this patch. From the test page, the array
variant was superior with one of the test results as follows.
Kernel XDP stats CPU pps Delta
Baseline XDP-RX CPU total 3,771,046 n/a
List XDP-RX CPU total 3,940,242 +4.49%
Array XDP-RX CPU total 4,249,224 +12.68%
Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation for next patch, move the dma mapping into its own function,
as this will make it easier to follow the changes.
[ilias.apalodimas: make page_pool_dma_map return boolean]
Link: https://lkml.kernel.org/r/20210325114228.27719-9-mgorman@techsingularity.net
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
In case ethernet driver is enabled and INET is disabled, selftest will
fail to build.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 3e1e58d64c ("net: add generic selftest support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210428130947.29649-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink external port attribute for SF (Sub-Function) port flavour
This adds the support to instantiate Sub-Functions on external hosts
E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users
are now able to spawn new Sub-Functions on the Host server CPU.
Parav Pandit Says:
==================
This series introduces and uses external attribute for the SF port to
indicate that a SF port belongs to an external controller.
This is needed to generate unique phys_port_name when PF and SF numbers
are overlapping between local and external controllers.
For example two controllers 0 and 1, both of these controller have a SF.
having PF number 0, SF number 77. Here, phys_port_name has duplicate
entry which doesn't have controller number in it.
Hence, add controller number optionally when a SF port is for an
external controller. This extension is similar to existing PF and VF
eswitch ports of the external controller.
When a SF is for external controller an example view of external SF
port and config sequence:
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Patch summary:
First 3 patches prepares the eswitch to handle vports in more generic
way using xarray to lookup vport from its unique vport number.
Patch-1 returns maximum eswitch ports only when eswitch is enabled
Patch-2 prepares eswitch to return eswitch max ports from a struct
Patch-3 uses xarray for vport and representor lookup
Patch-4 considers SF for an additioanl range of SF vports
Patch-5 relies on SF hw table to check SF support
Patch-6 extends SF devlink port attribute for external flag
Patch-7 stores the per controller SF allocation attributes
Patch-8 uses SF function id for filtering events
Patch-9 uses helper for allocation and free
Patch-10 splits hw table into per controller table and generic one
Patch-11 extends sf table for additional range
==================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmCDz80ACgkQSD+KveBX
+j4LmggAwS9otYoo639Kmow/wlMZ6yyLsH02zVMFLEJ2AE4VbL73i4iiQ67ZWygL
yQ8HawPAnythx4RsN/M6/WjSKRpdqTC27C9CpdM78zhXb1vnOrlzba7rYngqmo7N
5fIkGyjsUGHNqq+15SftK7JYbXFTe1b5RdWawXkQoyBlXTTBamyxD7C5NMpoDots
/e88Bs8Zy5nVPZqPchIId8TZEKKuO/heTz8ks6q6s/t1MGj7QP+ddxVMgNg00NR5
OpNTr7YYdpHxpfLSUZgdHaptwwKOx+nou8LdJkIKWPs7SHX6HDggyZJjGBOEWtE7
qG7oSip4olOTM0w9PZrAewLwSYhq7Q==
=oqBr
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-21
devlink external port attribute for SF (Sub-Function) port flavour
This adds the support to instantiate Sub-Functions on external hosts
E.g when Eswitch manager is enabled on the ARM SmarNic SoC CPU, users
are now able to spawn new Sub-Functions on the Host server CPU.
Parav Pandit Says:
==================
This series introduces and uses external attribute for the SF port to
indicate that a SF port belongs to an external controller.
This is needed to generate unique phys_port_name when PF and SF numbers
are overlapping between local and external controllers.
For example two controllers 0 and 1, both of these controller have a SF.
having PF number 0, SF number 77. Here, phys_port_name has duplicate
entry which doesn't have controller number in it.
Hence, add controller number optionally when a SF port is for an
external controller. This extension is similar to existing PF and VF
eswitch ports of the external controller.
When a SF is for external controller an example view of external SF
port and config sequence:
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Patch summary:
First 3 patches prepares the eswitch to handle vports in more generic
way using xarray to lookup vport from its unique vport number.
Patch-1 returns maximum eswitch ports only when eswitch is enabled
Patch-2 prepares eswitch to return eswitch max ports from a struct
Patch-3 uses xarray for vport and representor lookup
Patch-4 considers SF for an additioanl range of SF vports
Patch-5 relies on SF hw table to check SF support
Patch-6 extends SF devlink port attribute for external flag
Patch-7 stores the per controller SF allocation attributes
Patch-8 uses SF function id for filtering events
Patch-9 uses helper for allocation and free
Patch-10 splits hw table into per controller table and generic one
Patch-11 extends sf table for additional range
==================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 69 non-merge commits during the last 22 day(s) which contain
a total of 69 files changed, 3141 insertions(+), 866 deletions(-).
The main changes are:
1) Add BPF static linker support for extern resolution of global, from Andrii.
2) Refine retval for bpf_get_task_stack helper, from Dave.
3) Add a bpf_snprintf helper, from Florent.
4) A bunch of miscellaneous improvements from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extended SF port attributes to have optional external flag similar to
PCI PF and VF port attributes.
External atttibute is required to generate unique phys_port_name when PF number
and SF number are overlapping between two controllers similar to SR-IOV
VFs.
When a SF is for external controller an example view of external SF
port and config sequence.
On eswitch system:
$ devlink dev eswitch set pci/0033:01:00.0 mode switchdev
$ devlink port show
pci/0033:01:00.0/196607: type eth netdev enP51p1s0f0np0 flavour physical port 0 splittable false
pci/0033:01:00.0/131072: type eth netdev eth0 flavour pcipf controller 1 pfnum 0 external true splittable false
function:
hw_addr 00:00:00:00:00:00
$ devlink port add pci/0033:01:00.0 flavour pcisf pfnum 0 sfnum 77 controller 1
pci/0033:01:00.0/163840: type eth netdev eth1 flavour pcisf controller 1 pfnum 0 sfnum 77 splittable false
function:
hw_addr 00:00:00:00:00:00 state inactive opstate detached
phys_port_name construction:
$ cat /sys/class/net/eth1/phys_port_name
c1pf0sf77
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
tw_prot_cleanup will check the twsk_prot.
Fixes: 0f5907af39 ("net: Fix potential memory leak in proto_register()")
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a generic XDP program changes the destination MAC address from/to
multicast/broadcast, the skb->pkt_type is updated to properly handle
the packet when passed up the stack. When changing the MAC from/to
the NICs MAC, PACKET_HOST/OTHERHOST is not updated, though, making
the behavior different from that of native XDP.
Remember the PACKET_HOST/OTHERHOST state before calling the program
in generic XDP, and update pkt_type accordingly if the destination
MAC address has changed. As eth_type_trans() assumes a default
pkt_type of PACKET_HOST, restore that before calling it.
The use case for this is when a XDP program wants to push received
packets up the stack by rewriting the MAC to the NICs MAC, for
example by cluster nodes sharing MAC addresses.
Fixes: 2972495699 ("net: fix generic XDP to handle if eth header was mangled")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210419141559.8611-1-martin@strongswan.org
Following Race Condition was detected:
<CPU A, t0>: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.
This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.
<CPU B, t1> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.
<CPU A, t3>- Code hits neigh_update_gc_list, with neighbour entry
set as dead.
<CPU A, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.
Fixes: eb4e8fac00d1("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port some parts of the stmmac selftest and reuse it as basic generic selftest
library. This patch was tested with following combinations:
- iMX6DL FEC -> AT8035
- iMX6DL FEC -> SJA1105Q switch -> KSZ8081
- iMX6DL FEC -> SJA1105Q switch -> KSZ9031
- AR9331 ag71xx -> AR9331 PHY
- AR9331 ag71xx -> AR9331 switch -> AR9331 PHY
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
did the right thing, but missed the fact that napi_gro_frags() logics
calls for skb_gro_reset_offset() *before* pulling Ethernet header
to the skb linear space.
That said, the introduced check for frag0 address being aligned to 4
always fails for it as Ethernet header is obviously 14 bytes long,
and in case with NET_IP_ALIGN its start is not aligned to 4.
Fix this by adding @nhoff argument to skb_gro_reset_offset() which
tells if an IP header is placed right at the start of frag0 or not.
This restores Fast GRO for napi_gro_frags() that became very slow
after the mentioned commit, and preserves the introduced check to
avoid silent unaligned accesses.
From v1 [0]:
- inline tiny skb_gro_reset_offset() to let the code be optimized
more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- pull in Reviewed-by from Eric.
[0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me
Fixes: 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to store cmlen instead of len in cm->cmsg_len.
Fixes: 38ebcf5096 ("scm: optimize put_cmsg()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling two copy_to_user() for very small regions has very high overhead.
Switch to inlined unsafe_put_user() to save one stac/clac sequence,
and avoid copy_to_user().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the commit 1ddc3229ad ("skbuff: remove some unnecessary operation
in skb_segment_list()") introduces an issue very similar to the
one already fixed by commit 53475c5dd8 ("net: fix use-after-free when
UDP GRO with shared fraglist").
If the GSO skb goes though skb_clone() and pskb_expand_head() before
entering skb_segment_list(), the latter will unshare the frag_list
skbs and will release the old list. With the reverted commit in place,
when skb_segment_list() completes, skb->next points to the just
released list, and later on the kernel will hit UaF.
Note that since commit e0e3070a9b ("udp: properly complete L4 GRO
over UDP tunnel packet") the critical scenario can be reproduced also
receiving UDP over vxlan traffic with:
NIC (NETIF_F_GRO_FRAGLIST enabled) -> vxlan -> UDP sink
Attaching a packet socket to the NIC will cause skb_clone() and the
tunnel decapsulation will call pskb_expand_head().
Fixes: 1ddc3229ad ("skbuff: remove some unnecessary operation in skb_segment_list()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.
After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()
The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.
This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.
Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.
Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.
Fixes: 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0ef ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last refcnt of the psock can be gone right after
sock_map_remove_links(), so sk_psock_stop() could trigger a UAF.
The reason why I placed sk_psock_stop() there is to avoid RCU read
critical section, and more importantly, some callee of
sock_map_remove_links() is supposed to be called with RCU read lock,
we can not simply get rid of RCU read lock here. Therefore, the only
choice we have is to grab an additional refcnt with sk_psock_get()
and put it back after sk_psock_stop().
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: syzbot+7b6548ae483d6f4c64ae@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210408030556.45134-1-xiyou.wangcong@gmail.com
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-04-08
The following pull-request contains BPF updates for your *net* tree.
We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).
The main changes are:
1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.
2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
sock map, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is only one place where we want to specify new_ifindex. In all
other cases, callers pass 0 as new_ifindex. It looks reasonable to add a
low-level function with new_ifindex and to convert
dev_change_net_namespace to a static inline wrapper.
Fixes: eeb85a14ee ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this case, we don't need to check that new_ifindex is positive in
validate_linkmsg.
Fixes: eeb85a14ee ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Incorrect accounting fwd_alloc can result in a warning when the socket
is torn down,
[18455.319240] WARNING: CPU: 0 PID: 24075 at net/core/stream.c:208 sk_stream_kill_queues+0x21f/0x230
[...]
[18455.319543] Call Trace:
[18455.319556] inet_csk_destroy_sock+0xba/0x1f0
[18455.319577] tcp_rcv_state_process+0x1b4e/0x2380
[18455.319593] ? lock_downgrade+0x3a0/0x3a0
[18455.319617] ? tcp_finish_connect+0x1e0/0x1e0
[18455.319631] ? sk_reset_timer+0x15/0x70
[18455.319646] ? tcp_schedule_loss_probe+0x1b2/0x240
[18455.319663] ? lock_release+0xb2/0x3f0
[18455.319676] ? __release_sock+0x8a/0x1b0
[18455.319690] ? lock_downgrade+0x3a0/0x3a0
[18455.319704] ? lock_release+0x3f0/0x3f0
[18455.319717] ? __tcp_close+0x2c6/0x790
[18455.319736] ? tcp_v4_do_rcv+0x168/0x370
[18455.319750] tcp_v4_do_rcv+0x168/0x370
[18455.319767] __release_sock+0xbc/0x1b0
[18455.319785] __tcp_close+0x2ee/0x790
[18455.319805] tcp_close+0x20/0x80
This currently happens because on redirect case we do skb_set_owner_r()
with the original sock. This increments the fwd_alloc memory accounting
on the original sock. Then on redirect we may push this into the queue
of the psock we are redirecting to. When the skb is flushed from the
queue we give the memory back to the original sock. The problem is if
the original sock is destroyed/closed with skbs on another psocks queue
then the original sock will not have a way to reclaim the memory before
being destroyed. Then above warning will be thrown
sockA sockB
sk_psock_strp_read()
sk_psock_verdict_apply()
-- SK_REDIRECT --
sk_psock_skb_redirect()
skb_queue_tail(psock_other->ingress_skb..)
sk_close()
sock_map_unref()
sk_psock_put()
sk_psock_drop()
sk_psock_zap_ingress()
At this point we have torn down our own psock, but have the outstanding
skb in psock_other. Note that SK_PASS doesn't have this problem because
the sk_psock_drop() logic releases the skb, its still associated with
our psock.
To resolve lets only account for sockets on the ingress queue that are
still associated with the current socket. On the redirect case we will
check memory limits per 6fa9201a89, but will omit fwd_alloc accounting
until skb is actually enqueued. When the skb is sent via skb_send_sock_locked
or received with sk_psock_skb_ingress memory will be claimed on psock_other.
Fixes: 6fa9201a89 ("bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to self")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/161731444013.68884.4021114312848535993.stgit@john-XPS-13-9370
Currently, we can specify ifindex on link creation. This change allows
to specify ifindex when a device is moved to another network namespace.
Even now, a device ifindex can be changed if there is another device
with the same ifindex in the target namespace. So this change doesn't
introduce completely new behavior, it adds more control to the process.
CRIU users want to restore containers with pre-created network devices.
A user will provide network devices and instructions where they have to
be restored, then CRIU will restore network namespaces and move devices
into them. The problem is that devices have to be restored with the same
indexes that they have before C/R.
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now UDP supports sockmap and redirection, we can safely update
the sock type checks for it accordingly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-15-xiyou.wangcong@gmail.com
Although these two functions are only used by TCP, they are not
specific to TCP at all, both operate on skmsg and ingress_msg,
so fit in net/core/skmsg.c very well.
And we will need them for non-TCP, so rename and move them to
skmsg.c and export them to modules.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-13-xiyou.wangcong@gmail.com
Currently sockmap calls into each protocol to update the struct
proto and replace it. This certainly won't work when the protocol
is implemented as a module, for example, AF_UNIX.
Introduce a new ops sk->sk_prot->psock_update_sk_prot(), so each
protocol can implement its own way to replace the struct proto.
This also helps get rid of symbol dependencies on CONFIG_INET.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-11-xiyou.wangcong@gmail.com
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
sock_map_link() passes down map progs, but it is confusing
to see both map progs and psock progs. Make the map progs
more obvious by retrieving it directly with sock_map_progs()
inside sock_map_link(). Now it is aligned with
sock_map_link_no_progs() too.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-8-xiyou.wangcong@gmail.com
The RCU callback sk_psock_destroy() only queues work psock->gc,
so we can just switch to rcu work to simplify the code.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-6-xiyou.wangcong@gmail.com
We do not have to lock the sock to avoid losing sk_socket,
instead we can purge all the ingress queues when we close
the socket. Sending or receiving packets after orphaning
socket makes no sense.
We do purge these queues when psock refcnt reaches zero but
here we want to purge them explicitly in sock_map_close().
There are also some nasty race conditions on testing bit
SK_PSOCK_TX_ENABLED and queuing/canceling the psock work,
we can expand psock->ingress_lock a bit to protect them too.
As noticed by John, we still have to lock the psock->work,
because the same work item could be running concurrently on
different CPU's.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-5-xiyou.wangcong@gmail.com
We only have skb_send_sock_locked() which requires callers
to use lock_sock(). Introduce a variant skb_send_sock()
which locks on its own, callers do not need to lock it
any more. This will save us from adding a ->sendmsg_locked
for each protocol.
To reuse the code, pass function pointers to __skb_send_sock()
and build skb_send_sock() and skb_send_sock_locked() on top.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-4-xiyou.wangcong@gmail.com
Currently we rely on lock_sock to protect ingress_msg,
it is too big for this, we can actually just use a spinlock
to protect this list like protecting other skb queues.
__tcp_bpf_recvmsg() is still special because of peeking,
it still has to use lock_sock.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-3-xiyou.wangcong@gmail.com
Currently we purge the ingress_skb queue only when psock
refcnt goes down to 0, so locking the queue is not necessary,
but in order to be called during ->close, we have to lock it
here.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-2-xiyou.wangcong@gmail.com
xdp_return_frame() may be called outside of NAPI context to return
xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with
napi_direct = false. For page_pool memory model, __xdp_return() calls
xdp_return_frame_no_direct() unconditionally and below false negative
kernel BUG throw happened under preempt-rt build:
[ 430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884
[ 430.451678] caller is __xdp_return+0x1ff/0x2e0
[ 430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G U E 5.12.0-rc2+ #45
Changes in v2:
- This patch fixes the issue by making xdp_return_frame_no_direct() is
only called if napi_direct = true, as recommended for better by
Jesper Dangaard Brouer. Thanks!
Fixes: 2539650fad ("xdp: Helpers for disabling napi_direct of xdp_return_frame")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a short network outage, the dst_entry is timed out and put
in DST_OBSOLETE_DEAD. We are in this code because arp reply comes
from this neighbour after network recovers. There is a potential
race condition that dst_entry is still in DST_OBSOLETE_DEAD.
With that, another neighbour lookup causes more harm than good.
In best case all packets in arp_queue are lost. This is
counterproductive to the original goal of finding a better path
for those packets.
I observed a worst case with 4.x kernel where a dst_entry in
DST_OBSOLETE_DEAD state is associated with loopback net_device.
It leads to an ethernet header with all zero addresses.
A packet with all zero source MAC address is quite deadly with
mac80211, ath9k and 802.11 block ack. It fails
ieee80211_find_sta_by_ifaddr in ath9k (xmit.c). Ath9k flushes tx
queue (ath_tx_complete_aggr). BAW (block ack window) is not
updated. BAW logic is damaged and ath9k transmission is disabled.
Signed-off-by: Tong Zhu <zhutong@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the mentioned helper can end-up freeing the socket wmem
without waking-up any processes waiting for more write memory.
If the partially orphaned skb is attached to an UDP (or raw) socket,
the lack of wake-up can hang the user-space.
Even for TCP sockets not calling the sk destructor could have bad
effects on TSQ.
Address the issue using skb_orphan to release the sk wmem before
setting the new sock_efree destructor. Additionally bundle the
whole ownership update in a new helper, so that later other
potential users could avoid duplicate code.
v1 -> v2:
- use skb_orphan() instead of sort of open coding it (Eric)
- provide an helper for the ownership change (Eric)
Fixes: f6ba8d33cf ("netem: fix skb_orphan_partial()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following W=1 kernel build warning(s):
net/core/netevent.c:45: warning: expecting prototype for netevent_unregister_notifier(). Prototype was for unregister_netevent_notifier() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following W=1 kernel build warning(s):
net/core/dev_addr_lists.c:732: warning: expecting prototype for dev_uc_flush(). Prototype was for dev_uc_init() instead
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a few kernel function bpf_kfunc_call_test*() for the
selftest's test_run purpose. They will be allowed for tc_cls prog.
The selftest calling the kernel function bpf_kfunc_call_test*()
is also added in this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015252.1551395-1-kafai@fb.com
netdev_unregister_timeout_secs=0 can lead to printing the
"waiting for dev to become free" message every jiffy.
This is too frequent and unnecessary.
Set the min value to 1 second.
Also fix the merge issue introduced by
"net: make unregister netdev warning timeout configurable":
it changed "refcnt != 1" to "refcnt".
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 5aa3afe107 ("net: make unregister netdev warning timeout configurable")
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer
Linus Torvalds
Oleksij Rempel
David S. Miller
Parav Pandit
Tonghao Zhang
Martin Willi
Chinmay Agarwal
Ingo Molnar
Alexander Lobakin
Jakub Kicinski
Gustavo A. R. Silva
Eric Dumazet
Paolo Abeni
Cong Wang
Stephen Hemminger
Andrei Vagin
John Fastabend
Ong Boon Leong
Tong Zhu
Xiongfeng Wang
Martin KaFai Lau
Dmitry Vyukov