We use reset-simple in this patch so that pcie driver can use
devm_reset_control_get() to get this reset data structure and use
reset_control_deassert() to deassert pcie_power_up_rst_n.
Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
No surprises in this development cycle, and most of works are about
the fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced;
used by HD-audio for now, more adaption will follow later.
The former "Mic Mute-LED Mode" mixer control has been replaced with
the corresponding sysfs now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements;
this will allow more controls in the normal usage pattern while
avoiding the possible memory exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates
Note that this PR includes a couple of changes in reset and SPI
drivers, too, and some merge conflicts might happen.
-----BEGIN PGP SIGNATURE-----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=YT3U
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No surprises in this development cycle, and most of work is about the
fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced. It is used by HD-audio
for now, more adaption will follow later. The former "Mic Mute-LED
Mode" mixer control has been replaced with the corresponding sysfs
now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements; this will allow more controls in
the normal usage pattern while avoiding the possible memory
exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates"
* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: usb-audio: Remove redundant assignment to len
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
ALSA: virtio: fix kernel-doc
ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
...
The major and big addition this time is to support modularisation of
individual SCMI protocols thus enabling to add support for vendors'
custom SCMI protocol. This changes the interface provided by the SCMI
driver to all the users of SCMI and hence involved changes in various
other subsystem SCMI drivers. The change has been split with a bit of
transient code to preserve bisectability and avoiding one big patch bomb
changing all the users.
This also includes SCMI IIO driver(pulled from IIO tree) and support for
per-cpu DVFS.
-----BEGIN PGP SIGNATURE-----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=WLTW
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
ARM SCMI updates for v5.13
The major and big addition this time is to support modularisation of
individual SCMI protocols thus enabling to add support for vendors'
custom SCMI protocol. This changes the interface provided by the SCMI
driver to all the users of SCMI and hence involved changes in various
other subsystem SCMI drivers. The change has been split with a bit of
transient code to preserve bisectability and avoiding one big patch bomb
changing all the users.
This also includes SCMI IIO driver(pulled from IIO tree) and support for
per-cpu DVFS.
* tag 'scmi-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (41 commits)
firmware: arm_scmi: Add dynamic scmi devices creation
firmware: arm_scmi: Add protocol modularization support
firmware: arm_scmi: Rename non devres notify_ops
firmware: arm_scmi: Make notify_priv really private
firmware: arm_scmi: Cleanup events registration transient code
firmware: arm_scmi: Cleanup unused core transfer helper wrappers
firmware: arm_scmi: Cleanup legacy protocol init code
firmware: arm_scmi: Make references to handle const
firmware: arm_scmi: Remove legacy scmi_voltage_ops protocol interface
regulator: scmi: Port driver to the new scmi_voltage_proto_ops interface
firmware: arm_scmi: Port voltage protocol to new protocols interface
firmware: arm_scmi: Port systempower protocol to new protocols interface
firmware: arm_scmi: Remove legacy scmi_sensor_ops protocol interface
iio/scmi: Port driver to the new scmi_sensor_proto_ops interface
hwmon: (scmi) port driver to the new scmi_sensor_proto_ops interface
firmware: arm_scmi: Port sensor protocol to new protocols interface
firmware: arm_scmi: Remove legacy scmi_reset_ops protocol interface
reset: reset-scmi: Port driver to the new scmi_reset_proto_ops interface
firmware: arm_scmi: Port reset protocol to new protocols interface
firmware: arm_scmi: Remove legacy scmi_clk_ops protocol interface
...
Link: https://lore.kernel.org/r/20210331100657.ilu63i4swnr3zp4e@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Patches from Krzysztof Kozlowski the cleans up and consolidate support for
SoCFPGA platforms
- Rename ARCH_SOCFPGA into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_STRATIX10 into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_AGILEX into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_N5X into ARCH_INTEL_SOCFPGA
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEoHhMeiyk5VmwVMwNGZQEC4GjKPQFAmBi/OQUHGRpbmd1eWVu
QGtlcm5lbC5vcmcACgkQGZQEC4GjKPT2fhAAjhmp1uwKjIVr1T7yMs6XIxRtDTYQ
AFtbSbwqh4iTGnEouktbI+s/iZfK5Y+Gq9f3Ms3gWCppp5ammADxveHqvY7Z8LGn
0ZiUP3/XTAtaZlqvJ+jTn5kChSHbetzTmEIYjt8DJrBHhxSs/4YkjVJnVb1qNX1b
2KmkhcTEr7SaTVtTMbVlFlplbugAUixg+SXtc0UqgsupHVViWmkF7YnVvBYMHKpU
r5Pz0UTqIYEPGvaLkt/MAfcvtsFK5Nod6gsVjqxWWpPa7Djls8eH8dSkox5W76Jx
F+zMWFckf5SyveAMYqGlBzgnSPNEy7IpC5oZvi7ULqPAK5F+fT1TONjBpruQBsW+
yiX2Gl34d7o90h6PwnUiGyVzodKVkUqMfpKqd3O704oisT4jin4AvfxSmncsr+K+
lN8sD2bES4+VaaGxaldpu48tbGhMu4j8wGOiUqO0MvFj0gRoguSQV9i8gGOWxE0E
KqWGQTBByLK6Ec9GbkKNn+0jE7GR4dXmagdeCl7i0L6tAnB5G+tYH4qZj7IL3ZBZ
A0i9h/cLbRbYeLOV+bxKhuueHYU0O9/duy9RL9CrIBHePWgFnIV3z7i5Jd9/8qOJ
gSYJD8CmbXVrZOEBWzBmOXSEevhpi/g+GbuIFTqVAOaiNKLuGscMFCD+vBFn1fiI
Fij2nQ0B8qqnNuY=
=EWtt
-----END PGP SIGNATURE-----
Merge tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/drivers
SoCFPGA updates for v5.13
- Patches from Krzysztof Kozlowski the cleans up and consolidate support for
SoCFPGA platforms
- Rename ARCH_SOCFPGA into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_STRATIX10 into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_AGILEX into ARCH_INTEL_SOCFPGA
- Consolidate ARCH_N5X into ARCH_INTEL_SOCFPGA
* tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: drop ARCH_SOCFPGA
reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
i2c: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
dmaengine: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs
clk: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs (and compile test)
clk: socfpga: allow compile testing of Stratix 10 / Agilex clocks
arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA
EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10
clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10
clk: socfpga: build together Stratix 10, Agilex and N5X clock drivers
net: stmmac: merge ARCH_SOCFPGA and ARCH_STRATIX10
mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10
ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA
clk: socfpga: allow building N5X clocks with ARCH_N5X
Link: https://lore.kernel.org/r/20210330110430.558182-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Port the scmi reset driver to the new SCMI reset interface based on
protocol handles and common devm_get_ops().
Link: https://lore.kernel.org/r/20210316124903.35011-22-cristian.marussi@arm.com
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARCH_SOCFPGA is being renamed to ARCH_INTEL_SOCFPGA so adjust the
32-bit ARM drivers to rely on new symbol.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex, N5X and Stratix 10 share all quite similar arm64 hard cores and
SoC-part. Up to a point that N5X uses the same DTSI as Agilex. From
the Linux kernel point of view these are flavors of the same
architecture so there is no need for three top-level arm64
architectures. Simplify this by merging all three architectures into
ARCH_INTEL_SOCFPGA and dropping the other ARCH* arm64 Kconfig entries.
The side effect is that the INTEL_STRATIX10_SERVICE will now be
available for both 32-bit and 64-bit Intel SoCFPGA, even though it is
used only for 64-bit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Use devm_rpi_firmware_get() so as to make sure we release RPi's firmware
interface when unbinding the device.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Follow the clock and regulator subsystems' lead and add a bulk API
for reset controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I have a handful of new RISC-V related patches for this merge window:
* A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may catch
errors in new drivers.
* Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
* NUMA support for RISC-V, which involves making the arm64 code generic.
* Support for kasan on the vmalloc region.
* A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
* Support for allocating ASIDs.
* Preliminary support for kernels larger than 128MiB.
* Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmA4hXATHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYifryD/0SfXGOfj93Cxq7I7AYhhzCN7lJ5jvv
iEQScTlPqU9nfvYodo4EDq0fp+5LIPpTL/XBHtqVjzv0FqRNa28Ea0K7kO8HuXc4
BaUd0m/DqyB4Gfgm4qjc5bDneQ1ZYxVXprYERWNQ5Fj+tdWhaQGOW64N/TVodjjj
NgJtTqbIAcjJqjUtttM8TZN5U1TgwLo+KCqw3iYW12lV1YKBBuvrwvSdD6jnFdIQ
AzG/wRGZhxLoFxgBB/NEsZxDoSd6ztiwxLhS9lX4okZVsryyIdOE70Q/MflfiTlU
xE+AdxQXTMUiiqYSmHeDD6PDb57GT/K3hnjI1yP+lIZpbInsi29JKow1qjyYjfHl
9cSSKYCIXHL7jKU6pgt34G1O5N5+fgqHQhNbfKvlrQ2UPlfs/tWdKHpFIP/z9Jlr
0vCAou7NSEB9zZGqzO63uBLXoN8yfL8FT3uRnnRvoRpfpex5dQX2QqPLQ7327D7N
GUG31nd1PHTJPdxJ1cI4SO24PqPpWDWY9uaea+0jv7ivGClVadZPco/S3ZKloguT
lazYUvyA4oRrSAyln785Rd8vg4CinqTxMtIyZbRMbNkgzVQARi9a8rjvu4n9qms2
2wlXDFi8nR8B4ih5n79dSiiLM9ay9GJDxMcf9VxIxSAYZV2fJALnpK6gV2fzRBUe
+k/uv8BIsFmlwQ==
=CutX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released()
function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not
belong into any other subsystem, most of them living in
drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=I2Zn
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
SCMI firmware:
- add support for a completion interrupt
Reset controllers:
- new driver for BCM4908
- new devm_reset_control_get_optional_exclusive_released() function
Memory controllers:
- Renesas RZ/G2 support
- Tegra124 interconnect support
- Allow more drivers to be loadable modules
TEE/optee firmware:
- minor code cleanup
The other half of this is SoC specific drivers that do not belong into
any other subsystem, most of them living in drivers/soc:
- Allwinner/sunxi power management work
- Allwinner H616 support
- ASpeed AST2600 system identification support
- AT91 SAMA7G5 SoC ID driver
- AT91 SoC driver cleanups
- Broadcom BCM4908 power management bus support
- Marvell mbus cleanups
- Mediatek MT8167 power domain support
- Qualcomm socinfo driver support for PMIC
- Qualcomm SoC identification for many more products
- TI Keystone driver cleanups for PRUSS and elsewhere"
* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
soc: aspeed: socinfo: Add new systems
soc: aspeed: snoop: Add clock control logic
memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
optee: simplify i2c access
drivers: soc: atmel: fix type for same7
tee: optee: remove need_resched() before cond_resched()
soc: qcom: ocmem: don't return NULL in of_get_ocmem
optee: sync OP-TEE headers
tee: optee: fix 'physical' typos
drivers: optee: use flexible-array member instead of zero-length array
tee: fix some comment typos in header files
soc: ti: k3-ringacc: Use of_device_get_match_data()
soc: ti: pruss: Refactor the CFG sub-module init
soc: mediatek: pm-domains: Don't print an error if child domain is deferred
soc: mediatek: pm-domains: Add domain regulator supply
dt-bindings: power: Add domain regulator supply
soc: mediatek: cmdq: Remove cmdq_pkt_flush()
soc: mediatek: pm-domains: Add support for mt8167
...
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.
However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.
Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.
Thanks to Jun and Shawn for maintaining this platform over the past
five years.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a reset controller driver for the Canaan Kendryte K210 SoC. This
driver relies on its syscon compatible parent node (sysctl) for its
register mapping. Default this driver compilation to y when the
SOC_CANAAN option is selected.
The MAINTAINERS file is updated, adding the entry "CANAAN/KENDRYTE K210
SOC RESET CONTROLLER DRIVER" with myself listed as maintainer for this
driver.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
A function has a different name between their prototype
and its kernel-doc markup:
../drivers/reset/core.c:888: warning: expecting prototype for device_reset(). Prototype was for __device_reset() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The vendor prefix of "Hisilicon Limited" is "hisilicon", it is clearly
stated in "vendor-prefixes.yaml".
For backward compatibility reasons fall back to the deprecated compatible
if the new one failed.
Fixes: 1527058736 ("reset: hisilicon: add reset-hi3660")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
It's a trivial reset controller. One register with bit per PCIe core.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are a couple of subsystems maintained by other people that
merge their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control
and SoC identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
and SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs.
There is a trivial conflict in the cedrus driver, with two branches
adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
remove/remove conflict in linux/dma-mapping.h.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/alSUACgkQmmx57+YA
GNm7GRAAlNMVi7F0f4Ixf1bEh+J2QUonYIpZfrdxOLFwISGQ+nstGrFW2He/OeQv
KAi027tZLl6Sdzjy809cLDPA4Z2IKwjVWhEbBHybvy1+irPYjnixtLd0x3YvPhjH
iadlcjQ3uaGue8PvubK6CVnBEy82A+Pp29n9i4A4wX/8w+BVIhVsxwQWUBF8pFXE
3La2UZYZMVMvVZMrpTOqwCgdmLDCk+RLMVZ1IiRqBEBq5/DVq03uIXgjGEOrq8tl
PXC89w7K510Is891mbBdBThQf+pZkU1vwORuknDcEJKWs9ngbEha7ebVgp32kbFl
pi8DEK205d106WQgfn0Zxkpbsp8XD058wDILwkhBcteXlBaUEL6btGVLDTUCJZuv
/pkH8tL4lNGpThQFbCEXC8oHZBp2xk55P+SW9RRZOoA5tAp+sz7hlf3y3YKdCSxv
4xybeeVOAgjl01WtbEC7CuIkqcKVSQ7njhLhC8r5ASteNywDThqxLT6nd0VegcQc
YH3Eu9QRXpvFwQ35zMkTMWa27bMG5d60fp90bWT0R5amXZpxJJot87w8trFCxv74
mE5KvCbefCRNsTt8GOBA/WR7hVaG369g07qOvs7g4LjJEM3Nl2h/A4/zVFef9O0t
yq3Nm4YCGfDSAQXzGR2SJ3nxiqbDknzJTAtZPf4BmbaMuPOIJ5k=
=BjJf
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
Force the write operation in case the read already happens
to return the correct value.
Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In case of an error, call release_mem_region when an error happens
during allocation of resources. Also add error handling for the case
that reset_controller_register fails.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for resetting blocks through the Linux reset controller
subsystem for BCM63xx SoCs.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <F.fainelli@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In order to reduce the kernel Image size on multi-platform distributions,
make it possible to build the reset controller driver as a module.
This partially reverts commit 8290924e68 ("reset: meson: make it
explicitly non-modular").
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The current reset framework API does not allow to release what is done by
reset_control_reset(), IOW decrement triggered_count. Add the new
reset_control_rearm() call to do so.
When reset_control_reset() has been called once, the counter
triggered_count, in the reset framework, is incremented i.e the resource
under the reset is in-use and the reset should not be done again.
reset_control_rearm() would be the way to state that the resource is
no longer used and, that from the caller's perspective, the reset can be
fired again if necessary.
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reported-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
Fix W=1 compile warnings (invalid kerneldoc):
drivers/reset/core.c:50: warning: Function parameter or member 'array' not described in 'reset_control'
drivers/reset/core.c:50: warning: Function parameter or member 'deassert_count' not described in 'reset_control'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Updated the reset driver to support Versal platform.
As part of adding Versal support
- Added Versal specific compatible string.
- Reset Id and number of resets are different for Versal and ZynqMP,
hence taken care of these two based on compatible string.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use module_platform_driver(), add module device table, author,
description and license to support module build, and
CONFIG_RESET_IMX7 is changed to default 'y' ONLY for i.MX7D,
other platforms need to select it in defconfig.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge 5.9-rc3 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Raspberry Pi 4's co-processor controls some of the board's HW
initialization process, but it's up to Linux to trigger it when
relevant. Introduce a reset controller capable of interfacing with
RPi4's co-processor that models these firmware initialization routines as
reset lines.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629161845.6021-3-nsaenzjulienne@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y8Sq
-----END PGP SIGNATURE-----
Merge tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
kernel test robot reports a compile warning about REG_OFFSET redefined
in the reset-intel-gw.c after merging commit e44ab4e14d ("regmap:
Simplify implementation of the regmap_read_poll_timeout() macro"). the
warning is like that:
drivers/reset/reset-intel-gw.c:18:0: warning: "REG_OFFSET" redefined
#define REG_OFFSET GENMASK(31, 16)
In file included from ./arch/arm/mach-ixp4xx/include/mach/hardware.h:30:0,
from ./arch/arm/mach-ixp4xx/include/mach/io.h:15,
from ./arch/arm/include/asm/io.h:198,
from ./include/linux/io.h:13,
from ./include/linux/iopoll.h:14,
from ./include/linux/regmap.h:20,
from drivers/reset/reset-intel-gw.c:12:
./arch/arm/mach-ixp4xx/include/mach/platform.h:25:0: note: this is the location of the previous definition
#define REG_OFFSET 3
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c9aef213e3 ("reset: intel: Add system reset controller driver")
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The reset-simple code lacks a reset callback that is still pretty easy to
implement. The only real thing to consider is the delay needed for a device
to be reset, so let's expose that as part of the reset-simple driver data.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The reset-simple code can be useful for drivers outside of drivers/reset
that have a few reset controls as part of their features. Let's move it to
include/linux/reset.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
This is required to bring Mali450 gpu out of reset.
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: Enrico Weigelt <info@metux.net>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
[jstultz: Added comment, Fix void return build issue
Reported-by: kbuild test robot <lkp@intel.com>]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
i.MX8MP is a new SoC of i.MX8M family, it has same src IP
inside but with different module layout, add support for it.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Currently CONFIG_RESET_INTEL_GW=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:
/usr/bin/ld: drivers/reset/reset-intel-gw.o: in function `intel_reset_probe':
drivers/reset/reset-intel-gw.c:185: undefined reference to `devm_platform_ioremap_resource'
Fix the build error by adding the unspecified dependency.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Currently CONFIG_RESET_BRCMSTB_RESCAL=y implicitly depends on
CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get
the following build error:
/usr/bin/ld: drivers/reset/reset-brcmstb-rescal.o: in function `brcm_rescal_reset_probe':
drivers/reset/reset-brcmstb-rescal.c:76: undefined reference to `devm_ioremap_resource'
Fix the build error by adding the unspecified dependency.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615 ("reset: Do not register resource data for missing
resets").
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXhg87xcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwKgqAQDLy40/GkWMZe6pv3Q6P5i8FyQZ
pSMcIKLP9Ig1bLdeRQD/YDjBbFVt9UbD7yLNJTkoNn3jJeg0bQo520yQ14NBHgM=
=LMjX
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.6
This tag adds support for the Nuvoton NPCM, Intel Gatway SoC, and
Broadcom BCM7216 RESCAL reset controllers, adds missing SCSSI reset
controls for newer Uniphier SoCs, aligns the program flow in the
devm_reset_controller_register, __devm_reset_control_get, and
devm_reset_control_array_get functions for better consistency,
and allows to build the Qcom AOSS reset driver as a module.
This is based on v5.5-rc3 because the core patch depends on commit
db23808615 ("reset: Do not register resource data for missing
resets").
* tag 'reset-for-5.6' of git://git.pengutronix.de/pza/linux:
reset: qcom-aoss: Allow CONFIG_RESET_QCOM_AOSS to be a tristate
reset: Add Broadcom STB RESCAL reset controller
dt-bindings: reset: Document BCM7216 RESCAL reset controller
reset: intel: Add system reset controller driver
dt-bindings: reset: Add YAML schemas for the Intel Reset controller
reset: uniphier: Add SCSSI reset control for each channel
reset: Align logic and flow in managed helpers
reset: npcm: add NPCM reset controller driver
dt-bindings: reset: Add binding constants for NPCM7xx reset controller
dt-bindings: reset: add NPCM reset controller documentation
Link: https://lore.kernel.org/r/dbbb2ca7490a0146d9ba632fd4d9f38063e03e9f.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
corresponding cpuidle driver. This support is based upon using the generic
PM domain, which already supports devices belonging to CPUs.
Finally, these is a DTS patch that enables the hierarchical topology to be
used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
mode.
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAl4OEkgXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmEZw//Zr7kQS4NMBZjtLtKxLofvzXz
rtdNV3aO6xkDeU3qlaZzz8gFpsO6U5Ohg2LjQFDSAv+kDAHY8ll2Ivl20n56adWT
CXUjBriID1MDWgDe3F1wDTcgAoilpgI36yAKsZsZaSg5hYg01ooVnwEctQj+IWT/
9CzoOghTeDFxL1LoeCMCs6VZ9+qU4sPDcCwKB22YOirDGIlCpNmMt8FPcyN0Qxr6
XfRPlzSUXDKPVS4Uf4BJanQdd4fc2hSXTGf9ha6yByEtft8yb96ZyuJFhzEa91Fq
zM9UXkoL2hxHm8y9jMqrrOsg61+bOLNP73GToQMrLHUJTU970XNvOM+yWVAUshCH
KwfAwPMOTmwC61sGb8WyO7cnuul4sxsGKMGRjGcY/SvTCqB/hZcIke+AJH97zzC6
XcB/vt42cKFzATG0WHpmMcJ6v0ahpAVfDYcXvao+v86EvZTzZD8DBHQC/iWOysC/
XK+BUi7NTas2x3CC8cktFgHgU5kPdQG6Mu6mZe6fjGDMGrwMO0+eoFVwIbAYcCLJ
MEDvKepPhpYpqPQCz9bTxnGoTrv00r58UYwXukR5ohTEt+j+GaFH9FD++x53cBGZ
kQPkTJwZDh6Ozc98Ii9uEjXHSc4uq9aYURrrr8Qjs4/uAKRve2iyeKmFjnsJJt1f
WiAO6lSo2C546AV+ZEI=
=WFox
-----END PGP SIGNATURE-----
Merge tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm into arm/drivers
Initial support for hierarchical CPU arrangement, managed by PSCI and its
corresponding cpuidle driver. This support is based upon using the generic
PM domain, which already supports devices belonging to CPUs.
Finally, these is a DTS patch that enables the hierarchical topology to be
used for the Qcom 410c Dragonboard, which supports the PSCI OS-initiated
mode.
* tag 'cpuidle_psci-v5.5-rc4' of git://git.linaro.org/people/ulf.hansson/linux-pm: (611 commits)
arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916
cpuidle: psci: Add support for PM domains by using genpd
PM / Domains: Introduce a genpd OF helper that removes a subdomain
cpuidle: psci: Support CPU hotplug for the hierarchical model
cpuidle: psci: Manage runtime PM in the idle path
cpuidle: psci: Prepare to use OS initiated suspend mode via PM domains
cpuidle: psci: Attach CPU devices to their PM domains
cpuidle: psci: Add a helper to attach a CPU to its PM domain
cpuidle: psci: Support hierarchical CPU idle states
cpuidle: psci: Simplify OF parsing of CPU idle state nodes
cpuidle: dt: Support hierarchical CPU idle states
of: base: Add of_get_cpu_state_node() to get idle states for a CPU node
firmware: psci: Export functions to manage the OSI mode
dt: psci: Update DT bindings to support hierarchical PSCI states
cpuidle: psci: Align psci_power_state count with idle state count
Linux 5.5-rc4
locks: print unsigned ino in /proc/locks
riscv: export flush_icache_all to modules
riscv: reject invalid syscalls below -1
riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
...
Link: https://lore.kernel.org/r/20200102160820.3572-1-ulf.hansson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Allow CONFIG_RESET_QCOM_AOSS to be set as as =m to allow for the
driver to be loaded from a modules.
Also replaces the builtin_platform_driver() line with
module_platform_driver() and adds a MODULE_DEVICE_TABLE() entry.
Cc: Todd Kjos <tkjos@google.com>
Cc: Alistair Delva <adelva@google.com>
Cc: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On BCM7216 there is a special purpose reset controller named RESCAL
(reset calibration) which is necessary for SATA and PCIe0/1 to operate
correctly. This commit adds support for such a reset controller to be
available.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add driver for the reset controller present on Intel
Gateway SoCs for performing reset management of the
devices present on the SoC. Driver also registers a
reset handler to peform the entire device reset.
Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Linus Torvalds
Greentime Hu
Arnd Bergmann
Cristian Marussi
Krzysztof Kozlowski
Nicolas Saenz Julienne
Philipp Zabel
Damien Le Moal
Mauro Carvalho Chehab
Zhen Lei
Rafał Miłecki
Crystal Guo
Dinh Nguyen
Álvaro Fernández Rojas
Neil Armstrong
Amjad Ouled-Ameur
Alain Volmat
Peng Fan
Krzysztof Kozlowski
Sai Krishna Potthuri
Anson Huang
Greg Kroah-Hartman
Gustavo A. R. Silva
Alexander A. Klimov
Dejin Zheng
Maxime Ripard
Peter Griffin
Rajan Vaja
Brendan Higgins
Olof Johansson
John Stultz
Jim Quinlan
Dilip Kota