Граф коммитов

28 Коммитов

Автор SHA1 Сообщение Дата
Lucas De Marchi 970e248649 Documentation: remove references to /etc/modprobe.conf
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and
is no longer parsed by new kmod tool. References to this file are
replaced in Documentation, comments and Kconfig according to the
context.

There are also some references to the old /etc/modules.conf from 2.4
kernels that are being removed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-30 16:03:15 -07:00
Masanari Iida 40e47125e6 Documentation: Fix multiple typo in Documentation
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-07 16:08:24 +01:00
Bartlomiej Zolnierkiewicz 075affcbe0 ide: preserve Host Protected Area by default (v2)
From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.

Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.

Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected.  Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).

v2:
Fix ->resume HPA support.

While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txt

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07 13:52:52 +02:00
Bartlomiej Zolnierkiewicz 02c84bde23 ide: update warm-plug HOWTO
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06 17:21:00 +01:00
Bartlomiej Zolnierkiewicz 9dcba7f2b7 gayle: add "doubler" parameter
* Add "doubler" parameter to enable support for IDE doublers.

* Obsolete "ide=doubler" kernel parameter.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:30 +02:00
Bartlomiej Zolnierkiewicz 4706a7e03a ide: add "cdrom=" and "chs=" parameters
* Add "cdrom=" and "chs=" parameters.

* Obsolete "hdx=cdrom" and "hdx=cyls,heads,sects" kernel parameters.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:30 +02:00
Bartlomiej Zolnierkiewicz 6e87543a94 ide: add "nodma|noflush|noprobe|nowerr=" parameters
* Add "nodma|noflush|noprobe|nowerr=" parameters.

* Obsolete "hdx=noprobe|none|nowerr|nodma|noflush" kernel parameters.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:30 +02:00
Bartlomiej Zolnierkiewicz 207daeaabb ide: remove obsoleted "hdx=autotune" kernel parameter
* Remove obsoleted "hdx=autotune" kernel parameter
  (we always auto-tune PIO if possible nowadays).

* Remove no longer needed ide_drive_t.autotune flag.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:29 +02:00
Bartlomiej Zolnierkiewicz 73f1ad8670 ide: mark "idebus=" kernel parameter as obsoleted (take 2)
We have "vlb|pci_clock=" parameters now.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:29 +02:00
Borislav Petkov 10569713c7 ide-tape: remove comments markup from Documentation/ide/ide-tape.txt
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:28 +02:00
Borislav Petkov 4735f22cc1 ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:28 +02:00
Bartlomiej Zolnierkiewicz ef87f8d096 ide: remove obsoleted "idex=" kernel parameters
* Remove obsoleted "idex=" kernel parameters.

* Make probe_* and cmd640_vlb variables static.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:24 +02:00
Bartlomiej Zolnierkiewicz e460a59751 ide: remove obsoleted "idex=reset" kernel parameter
Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:24 +02:00
Bartlomiej Zolnierkiewicz 9dd4cf1fb9 ide: remove obsoleted "idex=serialize" kernel parameter
Remove obsoleted "idex=serialize" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:24 +02:00
Bartlomiej Zolnierkiewicz 9fd91d959f ide: add "ignore_cable" parameter (take 2)
Add "ignore_cable" parameter:

* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
  (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")

* "ignore_cable=[interface_number]" module parameter (for ide_core module)
  if IDE is compiled as module

v2:
* Add ide_port_apply_params() helper
  - use it in ide_device_add_all() and ide_scan_port().

* Make it possible to later disable ignoring cable detection by passing
  "[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
  (however sysfs interface is not enabled yet since it needs some other
   IDE changes to make it work reliable).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:23 +02:00
Bartlomiej Zolnierkiewicz ffd4f6f0ee ide: add ide-4drives host driver (take 3)
CONFIG_BLK_DEV_4DRIVES deserves its own host driver:

* Add drivers/ide/legacy/ide-4drives.c and move "4drives" support there.

* Add ide-4drives.o in the link order after all other legacy host
  drivers enabled by "ide0=" options (they all are mutually exclusive).

* Make ide-4drives host driver probe itself for IDE devices instead of
  indirectly depending on ide_generic host driver.

* Add "probe" module parameter to ide-4drives and update documentation.

v2:
* s/paramater/parameter/ in ide.txt. (Noticed by Randy Dunlap)

v3:
* s/ide_4drives.probe/ide-4drives.probe/ in help entry.
  (Noticed by Sergei Shtylyov)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:34 +02:00
Bartlomiej Zolnierkiewicz 9a0e77f28b ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters (take 2)
* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  and update Documentation/ide/ide.txt.

* Remove no longer needed ide_forced chipset type.

v2:
* is_chipset_set[] -> is_chipset_set in ide.c.

* Documentation/ide/ide.txt fix.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:24 +02:00
Bartlomiej Zolnierkiewicz 80aa31cb46 ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)
* Remove CONFIG_BLK_DEV_HD hack from init_hwif_default()
  ("hda=noprobe hdb=noprobe" kernel parameters should be used
  instead if somebody wishes to use the old "hd" driver).

* Make CONFIG_BLK_DEV_HD_ONLY config option available also when
  IDE subsystem is used and update help entry.

* Remove no longer needed CONFIG_BLK_DEV_HD_IDE config option.

v2:
* Update documentation to suggest "hda=noprobe hdb=noprobe"
  instead of obsoleted "ide0=noprobe".

* Update Documentation/ide/ide.txt.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:24 +02:00
Bartlomiej Zolnierkiewicz f74c91413e ide: add warm-plug support for IDE devices (take 2)
* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct
  device *portdev' ('ide_port' class device) in ide_hwif_t.

* Register 'ide_port' class in ide_init() and unregister it in
  cleanup_module().

* Create ->portdev in ide_register_port () and unregister it in
  ide_unregister().

* Add "delete_devices" class device attribute for unregistering IDE devices
  on a port and "scan" one for probing+registering IDE devices on a port.

* Add ide_sysfs_register_port() helper for registering "delete_devices"
  and "scan" attributes with ->portdev.  Call it in ide_device_add_all().

* Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt.

v2:
* Convert patch from using 'struct class_device' to use 'struct device'.
  (thanks to Kay Sievers for doing it)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:23 +02:00
Greg Kroah-Hartman a594eeb1a1 IDE: remove ide=reverse IDE core
This option is obsolete and can be removed safely.

It allows us to remove the pci_get_device_reverse() function from the
PCI core.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:20 +02:00
Bartlomiej Zolnierkiewicz d708c40da8 ide: mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
Mark "hdx=remap" and "hdx=remap63" kernel parameters as obsoleted
(they are layering violation and should be dealt with in the same
 way as done by libata - device-mapper should be used instead).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-22 16:40:22 +01:00
Bartlomiej Zolnierkiewicz 15220d9b5a ide: mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
Mark "hdx=[driver_name]" and "hdx=scsi" kernel parameters as obsoleted
(nowadays device-driver binding can be changed at runtime through sysfs
 and it can also be dealt with using per device driver parameters).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-22 16:40:21 +01:00
Bartlomiej Zolnierkiewicz ad1c53bcdb ide: Documentation/ide/ide.txt fixes
* "hdx=cyls,heads,sects,wpcom,irq" should be "hdx=cyls,heads,sects".

* "hdx=" is for "x" from 'a' to 'u', "idex=" is for "x" from '0' to '9'.

* "idex=noautotune" is long gone.

* Obsoleted "ide0=" parameters were already removed from the documentation.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-22 16:40:21 +01:00
Randy Dunlap 1c10e93828 ide: update references to Documentation/ide/ide.txt (v2)
Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-07 21:53:50 +01:00
Randy Dunlap 331a5ad2a2 ide: move ide.txt to Documentation/ide/
Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-07 21:53:50 +01:00
Borislav Petkov 5ce78af4be ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002
Also, cleanup whitespace and update comments.

Bart:
- remove reference to drivers/block/ide.c
- move driver documentation to Documentation/ide/ide-tape.txt

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:48 +01:00
Borislav Petkov d3f208488f ide-floppy: cleanup header
Move ide-floppy historical changelog to
Documentation/ide/ChangeLog.ide-floppy.1996-2002

Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:33 +01:00
Bartlomiej Zolnierkiewicz 03553353e9 ide-cd: move historical changelog to Documentation/ide/ChangeLog.ide-cd.1994-2004
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:18 +01:00