When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing (see
stack trace [1]).
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
[1]:
--
Call Trace:
<TASK>
__schedule+0x390/0x910
? scan_shadow_nodes+0x40/0x40
schedule+0x55/0xe0
io_schedule+0x16/0x40
do_read_cache_page+0x55d/0x850
? __page_cache_alloc+0x90/0x90
read_cache_page+0x12/0x20
read_part_sector+0x3f/0x110
amiga_partition+0x3d/0x3e0
? osf_partition+0x33/0x220
? put_partition+0x90/0x90
bdev_disk_changed+0x1fe/0x4d0
blkdev_get_whole+0x7b/0x90
blkdev_get_by_dev+0xda/0x2d0
device_add_disk+0x356/0x3b0
nvme_mpath_set_live+0x13c/0x1a0 [nvme_core]
? nvme_parse_ana_log+0xae/0x1a0 [nvme_core]
nvme_update_ns_ana_state+0x3a/0x40 [nvme_core]
nvme_mpath_add_disk+0x120/0x160 [nvme_core]
nvme_alloc_ns+0x594/0xa00 [nvme_core]
nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core]
? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core]
nvme_scan_work+0x281/0x410 [nvme_core]
process_one_work+0x1be/0x380
worker_thread+0x37/0x3b0
? process_one_work+0x380/0x380
kthread+0x12d/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
INFO: task nvme:6725 blocked for more than 491 seconds.
Not tainted 5.15.65-f0.el7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nvme state:D
stack: 0 pid: 6725 ppid: 1761 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x390/0x910
? sched_clock+0x9/0x10
schedule+0x55/0xe0
schedule_timeout+0x24b/0x2e0
? try_to_wake_up+0x358/0x510
? finish_task_switch+0x88/0x2c0
wait_for_completion+0xa5/0x110
__flush_work+0x144/0x210
? worker_attach_to_pool+0xc0/0xc0
flush_work+0x10/0x20
nvme_remove_namespaces+0x41/0xf0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x66 [nvme_core]
nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core]
dev_attr_store+0x14/0x30
sysfs_kf_write+0x38/0x50
kernfs_fop_write_iter+0x146/0x1d0
new_sync_write+0x114/0x1b0
? intel_pmu_handle_irq+0xe0/0x420
vfs_write+0x18d/0x270
ksys_write+0x61/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x61/0xcb
--
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
inflight or scheduled (specifically also .stop_ctrl
which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
to avoid competing ns addition/removal
3. continue to teardown the controller
However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).
The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
- err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing.
Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.
Fixes: b435ecea2a ("nvme: Add .stop_ctrl to nvme ctrl ops")
Fixes: f6c8e432cb ("nvme: flush namespace scanning work just before removing namespaces")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
-----BEGIN PGP SIGNATURE-----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=nwLk
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux
Pull passthrough updates from Jens Axboe:
"With these changes, passthrough NVMe support over io_uring now
performs at the same level as block device O_DIRECT, and in many cases
6-8% better.
This contains:
- Add support for fixed buffers for passthrough (Anuj, Kanchan)
- Enable batched allocations and freeing on passthrough, similarly to
what we support on the normal storage path (me)
- Fix from Geert fixing an issue with !CONFIG_IO_URING"
* tag 'for-6.1/passthrough-2022-10-04' of git://git.kernel.dk/linux:
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
nvme: wire up fixed buffer support for nvme passthrough
nvme: pass ubuffer as an integer
block: extend functionality to map bvec iterator
block: factor out blk_rq_map_bio_alloc helper
block: rename bio_map_put to blk_mq_map_bio_put
nvme: refactor nvme_alloc_request
nvme: refactor nvme_add_user_metadata
nvme: Use blk_rq_map_user_io helper
scsi: Use blk_rq_map_user_io helper
block: add blk_rq_map_user_io
io_uring: introduce fixed buffer support for io_uring_cmd
io_uring: add io_uring_cmd_import_fixed
nvme: enable batched completions of passthrough IO
nvme: split out metadata vs non metadata end_io uring_cmd completions
block: allow end_io based requests in the completion batch handling
block: change request end_io handler to pass back a return value
block: enable batched allocation for blk_mq_alloc_request()
block: kill deprecated BUG_ON() in the flush handling
-----BEGIN PGP SIGNATURE-----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=R05e
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
-----BEGIN PGP SIGNATURE-----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=m9kX
-----END PGP SIGNATURE-----
Merge tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Add supported for more directly managed task_work running.
This is beneficial for real world applications that end up issuing
lots of system calls as part of handling work. Normal task_work will
always execute as we transition in and out of the kernel, even for
"unrelated" system calls. It's more efficient to defer the handling
of io_uring's deferred work until the application wants it to be run,
generally in batches.
As part of ongoing work to write an io_uring network backend for
Thrift, this has been shown to greatly improve performance. (Dylan)
- Add IOPOLL support for passthrough (Kanchan)
- Improvements and fixes to the send zero-copy support (Pavel)
- Partial IO handling fixes (Pavel)
- CQE ordering fixes around CQ ring overflow (Pavel)
- Support sendto() for non-zc as well (Pavel)
- Support sendmsg for zerocopy (Pavel)
- Networking iov_iter fix (Stefan)
- Misc fixes and cleanups (Pavel, me)
* tag 'for-6.1/io_uring-2022-10-03' of git://git.kernel.dk/linux: (56 commits)
io_uring/net: fix notif cqe reordering
io_uring/net: don't update msg_name if not provided
io_uring: don't gate task_work run on TIF_NOTIFY_SIGNAL
io_uring/rw: defer fsnotify calls to task context
io_uring/net: fix fast_iov assignment in io_setup_async_msg()
io_uring/net: fix non-zc send with address
io_uring/net: don't skip notifs for failed requests
io_uring/rw: don't lose short results on io_setup_async_rw()
io_uring/rw: fix unexpected link breakage
io_uring/net: fix cleanup double free free_iov init
io_uring: fix CQE reordering
io_uring/net: fix UAF in io_sendrecv_fail()
selftest/net: adjust io_uring sendzc notif handling
io_uring: ensure local task_work marks task as running
io_uring/net: zerocopy sendmsg
io_uring/net: combine fail handlers
io_uring/net: rename io_sendzc()
io_uring/net: support non-zerocopy sendto
io_uring/net: refactor io_setup_async_addr
io_uring/net: don't lose partial send_zc on fail
...
-----BEGIN PGP SIGNATURE-----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=SZZ1
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A single NVMe pull request via Christoph with a few fixes that should
go into the 6.0 release:
- Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
if io_uring sends passthrough command with IORING_URING_CMD_FIXED flag,
use the pre-registered buffer for IO (non-vectored variant). Pass the
buffer/length to io_uring and get the bvec iterator for the range. Next,
pass this bvec to block-layer and obtain a bio/request for subsequent
processing.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-13-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a prep patch. Modify nvme_submit_user_cmd and
nvme_map_user_request to take ubuffer as plain integer
argument, and do away with nvme_to_user_ptr conversion in callers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-12-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_alloc_request expects a large number of parameters.
Split this out into two functions to reduce number of parameters.
First one retains the name nvme_alloc_request, while second one is
named nvme_map_user_request.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-8-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass struct request rather than bio. It helps to kill a parameter, and
some processing clean-up too.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-7-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the normal passthrough end_io path doesn't need the request
anymore, we can kill the explicit blk_mq_free_request() and just pass
back RQ_END_IO_FREE instead. This enables the batched completion from
freeing batches of requests at the time.
This brings passthrough IO performance at least on par with bdev based
O_DIRECT with io_uring. With this and batche allocations, peak performance
goes from 110M IOPS to 122M IOPS. For IRQ based, passthrough is now also
about 10% faster than previously, going from ~61M to ~67M IOPS.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By splitting up the metadata and non-metadata end_io handling, we can
remove any request dependencies on the normal non-metadata IO path. This
is in preparation for enabling the normal IO passthrough path to pass
the ownership of the request back to the block layer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-6.1/block: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet is a consumer of the block layer and should not directly look at
the request_queue. Use the bdev_ helpers to retrieve the device limits
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
nvmet is a consumer of the block layer and should not directly look at
the request_queue. Just use the NUMA node ID from the gendisk instead of
the request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_loop_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Defer initializing the sqsize field from the options until it has been
capped by MAXCMD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_fc_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code and use the chance the cleanup
the init_hctx methods a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Also update the sqsize field when capping the queue size, and remove the
check a queue size that is larger than sqsize given that sqsize is only
initialized from opts->queue_size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_rdma_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the common helpers to allocate and free the tagsets. To make this
work the generic nvme_ctrl now needs to be stored in the hctx private
data instead of the nvme_tcp_ctrl.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Point the private data to the generic controller structure in preparation
of using the common tagset init/exit code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
->nvme_tcp_queue is not used anywhere, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Add common helpers to allocate and tear down the admin and I/O tag sets,
including the special queues allocated with them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
The code to set the result field for the admin and I/O connect commands
is not only verbose and duplicated, but also violates the aliasing
rules as it accesses both the u16 and u32 members in the union.
Add a little helper to sort all that out.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Mark them as unsigned so that we don't need extra casts, and define
them relative to cdword0 instead of requiring extra shifts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Currently blktests nvme/002 trips up debugobjects if CONFIG_NVME_AUTH is
enabled, but authentication is not on a queue. This is because
nvmet_auth_sq_free cancels sq->auth_expired_work unconditionaly, while
auth_expired_work is only ever initialized if authentication is enabled
for a given controller.
Fix this by calling most of what is nvmet_init_auth unconditionally
when initializing the SQ, and just do the setting of the result
field in the connect command handler.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
There is only a single call-site of nvmet_tcp_finish_cmd(), this
becomes redundant. Remove nvmet_tcp_finish_cmd() and use the original
function body instead.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(),
add a bounds check to avoid out-of-bounds access.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
As per NVMe/TCP transport specification ICReq PDU is the first PDU received
by the controller and controller should receive only one ICReq PDU.
If controller receives more than one ICReq PDU then this can be considered
as fatal error.
nvmet-tcp driver does not check for ICReq PDU opcode if queue state is
NVMET_TCP_Q_LIVE. In LIVE state ICReq PDU is treated as CapsuleCmd PDU,
this can result in abnormal behavior.
Add a check for ICReq PDU in nvmet_tcp_done_recv_pdu() to fix this issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We've been reporting 2 maps regardless of whether the module parameter
asked for anything beyond the default queues. A consequence of this
means that blk-mq will reinitialize the all the hardware contexts and io
schedulers on every controller reset when the mapping is exactly the
same as before. This unnecessary overhead is adding several milliseconds
on a reset for environments that don't need it. Report the actual number
of mappings in use.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If swiotlb is force enabled dma_max_mapping_size ends up calling
swiotlb_max_mapping_size which takes into account the min align mask for
the device. Set the min align mask for nvme driver before calling
dma_max_mapping_size while calculating max hw sectors.
Signed-off-by: Rishabh Bhatnagar <risbhat@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a discovery controller is disconnected, no AENs will arrive to
notify the host about discovery log change events.
In order to solve this, send a uevent notification when a
persistent discovery controller reconnects. We add a new ctrl
flag NVME_CTRL_STARTED_ONCE that will be set on the first
start, and consecutive calls will find it set, and send the
event to userspace if the controller is a discovery controller.
Upon the event reception, userspace will re-read the discovery
log page and will act upon changes as it sees fit.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We expect to grow a few of these flags for various purposes
so make them a proper enumeration.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
E3C/E4C SSDs do support the Write Zeroes command in theory, but have very
bad performance when using it. As the firmware has been frozen for these
products we can not expect firmware improvements for it, so disable
Write Zeroes.
Signed-off-by: Tina Hsu <tina_hsu@phison.corp-partner.google.com>
[hch: update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified). The current code does it backwards.
Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.
Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command. The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.
Tested on a version 1.4 PCI NVMe device in an Azure VM.
Fixes: 1673f1f08c ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The subsystem reset writes to a register, so we have to ensure the
device state is capable of handling that otherwise the driver may access
unmapped registers. Use the state machine to ensure the subsystem reset
doesn't try to write registers on a device already undergoing this type
of reset.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214771
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The passthrough commands already have this restriction, but the other
operations do not. Require the same capabilities for all users as all of
these operations, which include resets and rescans, can be disruptive.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The firmware revision can change on after a reset so copy the most
recent info each time instead of just the first time, otherwise the
sysfs firmware_rev entry may contain stale data.
Reported-by: Jeff Lien <jeff.lien@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If a reset occurs after the scan work attempts to issue a command, the
reset may quisce the admin queue, which blocks the scan work's command
from dispatching. The scan work will not be able to complete while the
queue is quiesced.
Meanwhile, the reset work will cancel all outstanding admin tags and
wait until all requests have transitioned to idle, which includes the
passthrough request. But the passthrough request won't be set to idle
until after the scan_work flushes, so we're deadlocked.
Fix this by handling the end effects after the request has been freed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216354
Reported-by: Jonathan Derrick <Jonathan.Derrick@solidigm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need the poll_flags to know how to poll for the IO, and we should
have the batch structure in preparation for supporting batched
completions with iopoll.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store a cookie during submission, and use that to implement
completion-polling inside the ->uring_cmd_iopoll handler.
This handler makes use of existing bio poll facility.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20220823161443.49436-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
TCP transport relies on the routing table to determine which source
address and interface to use when making a connection. Currently, there
is no way to tell from userspace where a connection was made. This
patch exposes the actual source address using a new field named
"src_addr=" in the "address" attribute.
This is needed to diagnose and identify connectivity issues. With the
source address we can infer the interface associated with each
connection.
This was tested with nvme-cli 2.0 to verify it does not have any
adverse effect. The new "src_addr=" field will simply be displayed in
the output of the "list-subsys" or "list -v" commands as shown here.
$ nvme list-subsys
nvme-subsys0 - NQN=nqn.2014-08.org.nvmexpress.discovery
\
+- nvme0 tcp traddr=192.168.56.1,trsvcid=8009,src_addr=192.168.56.101 live
Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
kmap() is being deprecated in favor of kmap_local_page().[1]
There are two main problems with kmap(): (1) It comes with an overhead as
mapping space is restricted and protected by a global lock for
synchronization and (2) it also requires global TLB invalidation when the
kmap’s pool wraps and it might block when the mapping space is fully
utilized until a slot becomes available.
The pages which will be mapped are allocated in nvmet_tcp_map_data(),
using the GFP_KERNEL flag. This assures that they cannot come from
HIGHMEM. This imply that a straight page_address() can replace the kmap()
of sg_page(sg) in nvmet_tcp_map_pdu_iovec(). As a side effect, we might
also delete the field "nr_mapped" from struct "nvmet_tcp_cmd" because,
after removing the kmap() calls, there would be no longer any need of it.
In addition, there is no reason to use a kvec for the command receive
data buffers iovec, use a bio_vec instead and let iov_iter handle the
buffer mapping and data copy.
Test with blktests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with
HIGHMEM64GB enabled.
[1] "[PATCH] checkpatch: Add kmap and kmap_atomic to the deprecated
list" https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/
Cc: Chaitanya Kulkarni <chaitanyak@nvidia.com>
Cc: Keith Busch <kbusch@kernel.org>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
[sagi: added bio_vec plus minor naming changes]
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The 32-bit field, dma_len, packs better in the iod struct above the
dma_addr_t on 64-bit systems.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The largest allowed transfer is 4MB, which can use at most 1025 PRPs.
Each PRP is 8 bytes, so the maximum number of 4k nvme pages needed for
the iod_list is 3, which fits in an 's8' type.
While modifying this field, change the name to "nr_allocations" to
better represent that this is referring to the number of units allocated
from a dma_pool.
Also introduce a BUILD_BUG_ON to ensure we never accidently increase the
largest transfer limit beyond 127 chained prp lists.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It's only true or false, so make this a bool to reflect that and save
some space in nvme_iod.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We can get the nvme_queue from the req just as easily, so remove the
duplicate path to the same structure to save some space.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
It's perfectly fine to use the same traddr and trsvcid more than once
as long we use different host interface. This is used in setups where
the host has more than one interface but the target exposes only one
traddr/trsvcid combination.
Use the same acceptance rules for host_iface as we have for
host_traddr.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the number of queues might have changed.
In the case where we have more queues available than previously we try
to access queues which are not initialized yet.
The other case where we have less queues than previously, the
connection attempt will fail because the target doesn't support the
old number of queues and we end up in a reconnect loop.
Thus, only start queues which are currently present in the tagset
limited by the number of available queues. Then we update the tagset
and we can start any new queue.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On reconnect, the number of queues might have changed.
In the case where we have more queues available than previously we try
to access queues which are not initialized yet.
The other case where we have less queues than previously, the
connection attempt will fail because the target doesn't support the
old number of queues and we end up in a reconnect loop.
Thus, only start queues which are currently present in the tagset
limited by the number of available queues. Then we update the tagset
and we can start any new queue.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow to set the max queues the target supports. This is useful for
testing the reconnect attempt of the host with changing numbers of
supported queues.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For no volatile write cache block device backend, sending flush bio is
unnecessary, avoid to do that.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The parameter is not used in this function, so remove it.
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Jump directly to done_kfree to release d, which is consistent with the
code style behind.
Reported-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
req->cqe->result.u16 has already been assigned in the previous line, no
need to do it again.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Current "fake" nqn field is "nqn.2014.08.org.nvmexpress:", it is
not aligned with the canonical version for history reasons.
Signed-off-by: Linjun Bao <meljbao@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmMbdksQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpqm8EACPqE5eFwFtZZnYV8eFjtTQCA5aZ+u3HyF8
Xby5FEZxwpRaaGPwUZ6T7A45ZVH5ka+JPvSQYeSTKxdjBVeqmAUVnlhqLjxeTvJt
WhfSCrPq553eYIKoeUVGxLfQ5GhK4f/2noiEMUIEOMSsDyh4txm46MRNdfi5doj1
2JlbJyoTIK0ZRoraAuZp07bZPFnbxtjSB9YJlUqyKpiSMbM+xocPRaB3Tpr42So8
vUdgt2/tDZ2xNOf4gd1KqUlosIlaG0RWeZeXTU9knrQjPYtB77iM6MVDUGhgiYT/
w25XYCbZiGt1YwRTOYFX9bE6jGuPDc54isRqCmPSjYwTAbeEd7sWytn5D1W0IkaF
dH93mDaW+8/GrjdGVCJ4jLPRCfQvZZ8i5XlwXaXQfnTQ8okUelx5BJ6kEfKRUkhV
nZD0r5MskH4dQv4ESluaeblrDWphMaznZLNjp+UXfiycsbE9l2TX1FOjyK9E7f7o
4zGYiertjc7wj0OnnoDTf0wdpXI13xDqQGFhe1Lnz4tOrpTfzZqwyv4IkFo3VghR
OocJFk4GSuKLwDPASDY/B+nynhQw5fft/fp458Q5pFY/2zItvmg2rxloFetUAz9i
0kcrO4NuO1l6E20KoBED2HMrQOow68dqcCJTrRcXhDfUIRIk0XSg4Kd/nGJBhZZS
5mv/hhkjjQ==
=3RZd
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull via Christoph:
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors
(Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)
- Fix missing request flags in debugfs code (me)
- Partition scan fix (Ming)
* tag 'block-6.0-2022-09-09' of git://git.kernel.dk/linux-block:
block: add missing request flags to debugfs code
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
block: don't add partitions if GD_SUPPRESS_PART_SCAN is set
The driver prevents async event work while handling a processing paused
event, but someone needs to restart it after the controller returns to a
live state.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216400
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.
We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.
Due to this, a race condition may happen where:
1. request X is queued as !last-in-batch
2. request X submission context calls nvme_tcp_send_all directly
3. nvme_tcp_send_all is preempted and schedules to a different cpu
4. request Y is queued as last-in-batch
5. nvme_tcp_send_all context sends request X+Y, however signals for
both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.
==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.
To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.
Fixes: 122e5b9f3d ("nvme-tcp: optimize network stack with setting msg flags according to batch size")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
TCP_FIN_WAIT2 and TCP_LAST_ACK were not handled, the connection is closing
so we can ignore them and avoid printing the "unhandled state"
warning message.
[ 1298.852386] nvmet_tcp: queue 2 unhandled state 5
[ 1298.879112] nvmet_tcp: queue 7 unhandled state 5
[ 1298.884253] nvmet_tcp: queue 8 unhandled state 5
[ 1298.889475] nvmet_tcp: queue 9 unhandled state 5
v2: Do not call nvmet_tcp_schedule_release_queue(), just ignore
the fin_wait2 and last_ack states.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
There's a goto missing in nvmet_setup_auth(), causing a kernel oops
when nvme_auth_extract_key() fails.
Reported-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Lexar NM610 reports bogus eui64 values that appear to be the same across
all drives. Quirk them out so they are not marked as "non globally unique"
duplicates.
Signed-off-by: Shyamin Ayesh <me@shyamin.com>
[patch formatting]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0,
change their return type into void. Most callers ignore the returned value
anyway.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org
[axboe: fold in fix from Bart]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=1/w+
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
ADATA XPG GAMMIX S70 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Signed-off-by: Dennis P. Kliem <dpkliem@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When an error is detected and the host reconnects, the
nvme_tcp_error_recovery_work() function is called and starts
tearing down the io queues and de-allocating them;
If at the same time the "nvme" process deletes the controller via sysfs,
the nvme_tcp_delete_ctrl() gets called and waits until the
nvme_tcp_error_recovery_work() finishes its job; then starts
tearing down the io queues, but at this point they have already
been freed and the mutexes are destroyed.
Calling mutex_lock() against a destroyed mutex triggers a warning:
[ 1299.025575] nvme nvme1: Reconnecting in 10 seconds...
[ 1299.636449] nvme nvme1: Removing ctrl: NQN "blktests-subsystem-1"
[ 1299.645262] ------------[ cut here ]------------
[ 1299.649949] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 1299.649971] WARNING: CPU: 4 PID: 104150 at kernel/locking/mutex.c:579 __mutex_lock+0x2d0/0x7dc
[ 1299.717934] CPU: 4 PID: 104150 Comm: nvme
[ 1299.828075] Call trace:
[ 1299.830526] __mutex_lock+0x2d0/0x7dc
[ 1299.834203] mutex_lock_nested+0x64/0xd4
[ 1299.838139] nvme_tcp_stop_queue+0x54/0xe0 [nvme_tcp]
[ 1299.843211] nvme_tcp_teardown_io_queues.part.0+0x90/0x280 [nvme_tcp]
[ 1299.849672] nvme_tcp_delete_ctrl+0x6c/0xf0 [nvme_tcp]
[ 1299.854831] nvme_do_delete_ctrl+0x108/0x120 [nvme_core]
[ 1299.860181] nvme_sysfs_delete+0xec/0xf0 [nvme_core]
[ 1299.865179] dev_attr_store+0x40/0x70
Fix the warning by checking if the queues are allocated
in the nvme_tcp_stop_queue(). If they are not, it makes no
sense to try to stop them.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes the assumption that errval is an unsigned nvme error
Signed-off-by: Amit Engel <amit.engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For code neat purpose, we can use kmemdup to replace
kmalloc + memcpy.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
"nvme-fc: fold t fc_update_appid into fc_appid_store" accidentally
changed the userspace interface for the appid attribute, because the code
that decrements "count" to remove a trailing '\n' in the parsing results
in the decremented value being incorrectly be returned from the sysfs
write. Fix this by keeping an orig_count variable for the full length
of the write.
Fixes: c814153c83 ("nvme-fc: fold t fc_update_appid into fc_appid_store")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Tested-by: Muneendra Kumar M <muneendra.kumar@broadcom.com>
Without restarting admin queue in __nvme_fc_abort_outstanding_ios(),
it leaves controller not capable of handling admin pt request, and
causes io hang.
Fixes it by restarting admin queue if the caller of __nvme_fc_abort_outstanding_ios
requires to restart queue.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin Murphy,
Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
-----BEGIN PGP SIGNATURE-----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=Bv19
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
-----BEGIN PGP SIGNATURE-----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=pgNf
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe pull requests via Christoph:
- add support for In-Band authentication (Hannes Reinecke)
- handle the persistent internal error AER (Michael Kelley)
- use in-capsule data for TCP I/O queue connect (Caleb Sander)
- remove timeout for getting RDMA-CM established event (Israel
Rukshin)
- misc cleanups (Joel Granados, Sagi Grimberg, Chaitanya Kulkarni,
Guixin Liu, Xiang wangx)
- use command_id instead of req->tag in trace_nvme_complete_rq()
(Bean Huo)
- various fixes for the new authentication code (Lukas Bulwahn,
Dan Carpenter, Colin Ian King, Chaitanya Kulkarni, Hannes
Reinecke)
- small cleanups (Liu Song, Christoph Hellwig)
- restore compat_ioctl support (Nick Bowler)
- make a nvmet-tcp workqueue lockdep-safe (Sagi Grimberg)
- enable generic interface (/dev/ngXnY) for unknown command sets
(Joel Granados, Christoph Hellwig)
- don't always build constants.o (Christoph Hellwig)
- print the command name of aborted commands (Christoph Hellwig)
- MD pull requests via Song:
- Improve raid5 lock contention, by Logan Gunthorpe.
- Misc fixes to raid5, by Logan Gunthorpe.
- Fix race condition with md_reap_sync_thread(), by Guoqing Jiang.
- Fix potential deadlock with raid5_quiesce and
raid5_get_active_stripe, by Logan Gunthorpe.
- Refactoring md_alloc(), by Christoph"
- Fix md disk_name lifetime problems, by Christoph Hellwig
- Convert prepare_to_wait() to wait_woken() api, by Logan
Gunthorpe;
- Fix sectors_to_do bitmap issue, by Logan Gunthorpe.
- Work on unifying the null_blk module parameters and configfs API
(Vincent)
- drbd bitmap IO error fix (Lars)
- Set of rnbd fixes (Guoqing, Md Haris)
- Remove experimental marker on bcache async device registration (Coly)
- Series from cleaning up the bio splitting (Christoph)
- Removal of the sx8 block driver. This hardware never really
widespread, and it didn't receive a lot of attention after the
initial merge of it back in 2005 (Christoph)
- A few fixes for s390 dasd (Eric, Jiang)
- Followup set of fixes for ublk (Ming)
- Support for UBLK_IO_NEED_GET_DATA for ublk (ZiyangZhang)
- Fixes for the dio dma alignment (Keith)
- Misc fixes and cleanups (Ming, Yu, Dan, Christophe
* tag 'for-5.20/block-2022-08-04' of git://git.kernel.dk/linux-block: (136 commits)
s390/dasd: Establish DMA alignment
s390/dasd: drop unexpected word 'for' in comments
ublk_drv: add support for UBLK_IO_NEED_GET_DATA
ublk_cmd.h: add one new ublk command: UBLK_IO_NEED_GET_DATA
ublk_drv: cleanup ublksrv_ctrl_dev_info
ublk_drv: add SET_PARAMS/GET_PARAMS control command
ublk_drv: fix ublk device leak in case that add_disk fails
ublk_drv: cancel device even though disk isn't up
block: fix leaking page ref on truncated direct io
block: ensure bio_iov_add_page can't fail
block: ensure iov_iter advances for added pages
drivers:md:fix a potential use-after-free bug
md/raid5: Ensure batch_last is released before sleeping for quiesce
md/raid5: Move stripe_request_ctx up
md/raid5: Drop unnecessary call to r5c_check_stripe_cache_usage()
md/raid5: Make is_inactive_blocked() helper
md/raid5: Refactor raid5_get_active_stripe()
block: pass struct queue_limits to the bio splitting helpers
block: move bio_allowed_max_sectors to blk-merge.c
block: move the call to get_max_io_size out of blk_bio_segment_split
...
One of the goals is to reduce the overhead of using ->read_iter()
and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
has a surprising amount of overhead, in particular inside iocb_flags().
That's why the beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
=9UCV
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are
sending/receiving for the socket from works on this workqueue.
Also this eliminates lockdep complaints:
--
[ 6174.010200] workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing
!WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp]
[ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628
check_flush_dependency+0x110/0x14c
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend nvme_alloc_ns() and nvme_validate_ns() for unknown command-set as
well. Both are made to use a new helper (nvme_update_ns_info_cs_indep)
which is similar to nvme_update_ns_info but performs fewer operations
to get the generic interface up.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
[hch: rebased on other refactoring patches]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a little helper to check if a namespace should be marked read-only
that uses a new is_readonly flag in the nvme_ns_info structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change nvme_ns_scan to gather all information needed for generic
namespace setup into a nvme_ns_info structure. This structure is filled
from the Command Set Idependent Identify Namespace data structure if
it is available or else the legacy Identify namespace structure.
With that everything related to the NVM command set (and the ZNS command
set derived from it) can be encapsulated in the nvme_update_ns_info_block
function while keeping the rest of the namespace probing generic.
The downside is that we now always issue two Identify Namespace calls for
each probed namespace instead of usually just a single one previously.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check for multiple command set support early on an error out if is
not supported when a !NVM command set namespace is found. This
prepares for adding command set independent passthrough support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This shorter name much better fits what this function does in
the scanning process.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_revalidate_zones can also return -ENODEV if e.g. zone sizes aren't
constant or not a power of two. In that case we should jump to marking
the gendisk hidden and only support pass through.
Fixes: 602e57c979 ("nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info")
Reported-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 71ebe3842ebe ("nvmet-auth: Diffie-Hellman key exchange support")
intends to select 'Support for RFC 7919 FFDHE group parameters' for using
FFDHE groups for NVMe In-Band Authentication.
It however selects CRYPTO_DH_GROUPS_RFC7919, instead of the intended
CRYPTO_DH_RFC7919_GROUPS; notice the swapping of words here.
Correct the select to the intended config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_auth_challenge() return type is int and currently it uses status
variable that is of type u16 in nvmet_execute_auth_receive().
Catch the return value of nvmet_auth_challenge() into int and set the
NVME_SC_INTERNAL as status variable before we jump to error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvmet_setup_auth() return type is int and currently it uses status
variable that is of type u16 in nvmet_execute_auth_send().
Catch the return value of nvmet_setup_auth() into int and set the
NVME_SC_INTERNAL as status variable before we jump to error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a couple of spelling mistakes in pr_warn and pr_debug messages.
Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
dh_keysize is a size_t, use the proper format specifier for printing it.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@sues.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
And add an empty line after the variable declaration.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Casting function pointers breaks control flow enforcement and is
generally a horrible coding style.
Add two wrappers to get rid of these casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_tcp_alloc_tagset into one helper for the admin tag_set and
one for the I/O tag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_rdma_alloc_tagset into one helper for the admin tag_set and
one for the I/O tag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_dev_add into a helper to actually allocate the tag set, and
one that just update the number of queues. Add a local variable for
the tag_set to clean up the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split nvme_alloc_admin_tags into a helper to actually allocate the
tag set, and one that just restarts the admin queue. Add a local
variable for the tag_set to clean up the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow for slightly better debugging, print the command name when
aborting an command.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If prp_list is NULL, nvme_unmap_sg will be performed, and the assignment
to first_dma is meaningless, so remove it.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A couple of the early error gotos call kfree_sensitive(transformed_key);
before "transformed_key" has been initialized.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The > ARRAY_SIZE() checks need to be >= ARRAY_SIZE() to prevent reading
one element beyond the end of the arrays.
Fixes: db1312dd95 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 89b3d6e605 ("nvme: simplify the compat ioctl handling") removed
the initialization of compat_ioctl from the nvme block_device_operations
structures.
Presumably the expectation was that 32-bit ioctls would be directed
through the regular handler but this is not the case: failing to assign
.compat_ioctl actually means that the compat case is disabled entirely,
and any attempt to submit nvme ioctls from 32-bit userspace fails
outright with -ENOTTY.
For example:
% smartctl -x /dev/nvme0n1
[...]
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Inappropriate ioctl for device
The blkdev_compat_ptr_ioctl helper can be used to direct compat calls
through the main ioctl handler and makes things work again.
Fixes: 89b3d6e605 ("nvme: simplify the compat ioctl handling")
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The entire content of constants.c if guarded by an ifdef, so switch to
just building the file conditionally instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use command_id instead of req->tag in trace_nvme_complete_rq(),
because of commit e7006de6c2 ("nvme: code command_id with a genctr
for use authentication after release"), cmd->common.command_id is set to
((genctl & 0xf)< 12 | req->tag), no longer req->tag, which makes cid in
trace_nvme_complete_rq and trace_nvme_setup_cmd are not the same.
Fixes: e7006de6c2 ("nvme: code command_id with a genctr for use authentication after release")
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass anagrpid as second argument. This is prep patch that allows reusing
this function for supporting unknown command sets.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ruozhu Li <liruozhu@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, command data is only sent in-capsule on the for admin or I/O
commands on queues that indicate support for it. Send fabrics command
data in-capsule for I/O queues as well to avoid needing a separate
H2CData PDU for the connect command.
This is optimization. Without this change, we send the connect command
capsule and data in separate PDUs (CapsuleCmd and H2CData), and must wait
for the controller to respond with an R2T PDU before sending the H2CData.
With the change, we send a single CapsuleCmd PDU that includes the data.
This reduces the number of bytes (and likely packets) sent across the network,
and simplifies the send state machine handling in the driver.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case many controllers start error recovery at the same time (i.e.,
when port is down and up), they may never succeed to reconnect again.
This is because the target can't handle all the connect requests at
three seconds (the arbitrary value set today). Even if some of the
connections are established, when a single queue fails to connect,
all the controller's queues are destroyed as well. So, on the
following reconnection attempts the number of connect requests may
remain the same. To fix this, remove the timeout and wait for RDMA-CM
event to abort/complete the connect request. RDMA-CM sends unreachable
event when a timeout of ~90 seconds is expired. This approach is used
at other RDMA-CM users like SRP and iSER at blocking mode. The commit
also renames NVME_RDMA_CONNECT_TIMEOUT_MS to NVME_RDMA_CM_TIMEOUT_MS.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each authentication step is required to be completed within the
KATO interval (or two minutes if not set). So add a workqueue function
to reset the transaction ID and the expected next protocol step;
this will automatically the next authentication command referring
to the terminated authentication.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some fabrics commands can be sent via io queues, so add a new
function nvmet_parse_fabrics_io_cmd() and rename the existing
nvmet_parse_fabrics_cmd() to nvmet_parse_fabrics_admin_cmd().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds two new fabric options 'dhchap_secret' to specify the
pre-shared key (in ASCII respresentation according to NVMe 2.0 section
8.13.5.8 'Secret representation') and 'dhchap_ctrl_secret' to specify
the pre-shared controller key for bi-directional authentication of both
the host and the controller.
Re-authentication can be triggered by writing the PSK into the new
controller sysfs attribute 'dhchap_secret' or 'dhchap_ctrl_secret'.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in clang build fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'connect' command might fail with NVME_SC_AUTH_REQUIRED, so we
should be decoding this error, too.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A helper now exist, no need to open-code the same functionality.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only caller of the __nvme_submit_sync_cmd() with qid value not equal to
NVME_QID_ANY is nvmf_connect_io_queues(), where qid value is alway set
to > 0.
[1] __nvme_submit_sync_cmd() callers with qid parameter from :-
Caller | qid parameter
------------------------------------------------------
* nvme_fc_connect_io_queues() |
nvmf_connect_io_queue() | qid > 0
* nvme_rdma_start_io_queues() |
nvme_rdma_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_tcp_start_io_queues() |
nvme_tcp_start_queue() |
nvmf_connect_io_queues() | qid > 0
* nvme_loop_connect_io_queues() |
nvmf_connect_io_queues() | qid > 0
When qid value of the function parameter __nvme_submit_sync_cmd() is > 0
from above callers, we use blk_mq_alloc_request_hctx(), where we pass
last parameter as 0 if qid functional parameter value is set to 0 with
conditional operators, see 1002 :-
991 int __nvme_submit_sync_cmd(struct request_queue *q, struct nvme_command *cmd,
992 union nvme_result *result, void *buffer, unsigned bufflen,
993 int qid, int at_head, blk_mq_req_flags_t flags)
994 {
995 struct request *req;
996 int ret;
997
998 if (qid == NVME_QID_ANY)
999 req = blk_mq_alloc_request(q, nvme_req_op(cmd), flags);
1000 else
1001 req = blk_mq_alloc_request_hctx(q, nvme_req_op(cmd), flags,
1002 qid ? qid - 1 : 0);
1003
But qid function parameter value of the __nvme_submit_sync_cmd() will
never be 0 from above caller list see [1], and all the other callers of
__nvme_submit_sync_cmd() use NVME_QID_ANY as qid value :-
1. nvme_submit_sync_cmd()
2. nvme_features()
3. nvme_sec_submit()
4. nvmf_reg_read32()
5. nvmf_reg_read64()
6. nvmf_ref_write32()
7. nvmf_connect_admin_queue()
Remove the conditional operator to pass the qid as 0 in the call to
blk_mq_alloc_requst_hctx().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The function __nvme_submit_sync_cmd() has following list of callers
that sets the timeout value to 0 :-
Callers | Timeout value
------------------------------------------------
nvme_submit_sync_cmd() | 0
nvme_features() | 0
nvme_sec_submit() | 0
nvmf_reg_read32() | 0
nvmf_reg_read64() | 0
nvmf_reg_write32() | 0
nvmf_connect_admin_queue() | 0
nvmf_connect_io_queue() | 0
Remove the timeout function parameter from __nvme_submit_sync_cmd() and
adjust the rest of code accordingly.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.
Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.
This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Introduce the helper function ib_dma_pci_p2p_dma_supported() to check
if a given ib_device can be used in P2PDMA transfers. This ensures
the ib_device is not using virt_dma and also that the underlying
dma_device supports P2PDMA.
Use the new helper in nvme-rdma to replace the existing check for
ib_uses_virt_dma(). Adding the dma_pci_p2pdma_supported() check allows
switching away from pci_p2pdma_[un]map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The dma_map operations now support P2PDMA pages directly. So remove
the calls to pci_p2pdma_[un]map_sg_attrs() and replace them with calls
to dma_map_sgtable().
dma_map_sgtable() returns more complete error codes than dma_map_sg()
and allows differentiating EREMOTEIO errors in case an unsupported
P2PDMA transfer is requested. When this happens, return BLK_STS_TARGET
so the request isn't retried.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Introduce a supports_pci_p2pdma() operation in nvme_ctrl_ops to
replace the fixed NVME_F_PCI_P2PDMA flag such that the dma_map_ops
flags can be checked for PCI P2PDMA support.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improve static type checking by using the new blk_opf_t type for variables
that represent a request operation combined with request flags. Rename
those variables from 'op' into 'opf'.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-39-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-38-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The issue exists when multipath is enabled and the namespace is
shared, but all the other controller checks at nvme_is_unique_nsid()
are false. The reason for this issue is that nvme_is_unique_nsid()
returns false when is called from nvme_mpath_alloc_disk() due to an
uninitialized value of head->shared. The patch fixes it by setting
head->shared before nvme_mpath_alloc_disk() is called.
Fixes: 5974ea7ce0 ("nvme: allow duplicate NSIDs for private namespaces")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A reset on a live device experiencing a link error still needs to have
the queue freeze state started for the subsequent reinitialization. Skip
only the register read if the device is not present instead of bypassing
the freeze checks.
Fixes: b98235d3a4 ("nvme-pci: harden drive presence detect in nvme_dev_disable()")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bdev based helpers instead of the queue based ones to clean up
the code a bit and prepare for storing all zone related fields in
struct gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass a block_device instead of a request_queue as that is what most
callers have at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch to a gendisk based API in preparation for moving all zone related
fields from the request_queue to the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for storing the zone related field in struct gendisk instead
of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer use the 'reserved' arg in busy_tag_iter_fn for any iter
function so it may be dropped.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me> #nvme
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1657109034-206040-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.
Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.
This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.
Fixes: 2079f41ec6 ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0 CPU1
nvme_rdma_error_recovery_work
nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl nvme_stop_queues
nvme_remove_namespaces
--clear ctrl->namespaces
nvme_start_queues
--no ns in ctrl->namespaces
nvme_ns_remove return(because ctrl is deleting)
blk_freeze_queue
blk_mq_freeze_queue_wait
--wait for ns to unquiesce to clean infligt IO, hang forever
This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.
Revert commit 794a4cb3d2 ("nvme: remove the .stop_ctrl callout")
Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue stoppage and inflight requests cancellation is fully fenced from
io_work and thus failing a request from this context. Hence we don't
need to try to guess from the socket retcode if this failure is because
the queue is about to be torn down or not.
We are perfectly safe to just fail it, the request will not be cancelled
later on.
This solves possible very long shutdown delays when the users issues a
'nvme disconnect-all'
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Data digest calculation iterates over command mapped iovec. However
since commit bac04454ef we unmap the iovec before we handle the data
digest, and since commit 69b85e1f1d we clear nr_mapped when we unmap
the iov.
Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.
Fixes: 69b85e1f1d ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454ef ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This device shares the PCI ID with the Samsung 970 Evo Plus that
does not need or want the quirks. Move the the quirk entry to the
core table based on the model number instead.
Fixes: bc360b0b16 ("nvme-pci: add quirks for Samsung X5 SSDs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
The Micron MTFDKBA2T0TFH device reports the same subsysem NQN for
all devices. Add a quick to ignore it.
Signed-off-by: Leo Savernik <l.savernik@aon.at>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Like commit 5611ec2b98 ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), UMIS and Samsung has the same issue:
[ 6305.633887] blk_update_request: operation not supported error,
dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0
phys_seg 0 prio class 0
So also disable Write Zeroes command on UMIS and Samsung.
Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When ZHITAI TiPro7000 SSDs entered deepest power state(ps4)
it has the same APST sleep problem as Kingston A2000.
by chance the system crashes and displays the same dmesg info:
https://bugzilla.kernel.org/show_bug.cgi?id=195039#c65
As the Archlinux wiki suggest (enlat + exlat) < 25000 is fine
and my testing shows no system crashes ever since.
Therefore disabling the deepest power state will fix the APST sleep issue.
https://wiki.archlinux.org/title/Solid_state_drive/NVMe
This is the APST data from 'nvme id-ctrl /dev/nvme1'
NVME Identify Controller:
vid : 0x1e49
ssvid : 0x1e49
sn : [...]
mn : ZHITAI TiPro7000 1TB
fr : ZTA32F3Y
[...]
ps 0 : mp:3.50W operational enlat:5 exlat:5 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
ps 1 : mp:3.30W operational enlat:50 exlat:100 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
ps 2 : mp:2.80W operational enlat:50 exlat:200 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
ps 3 : mp:0.1500W non-operational enlat:500 exlat:5000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
ps 4 : mp:0.0200W non-operational enlat:2000 exlat:60000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
Signed-off-by: Ning Wang <ningwang35@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
ADATA XPG GAMMIX S50 drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.
Signed-off-by: Stefan Reiter <stefan@pimaker.at>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Many users have encountered IO timeouts with a CSTS value of 0xffffffff,
which indicates a failure to read the register. While there are various
potential causes for this observation, faulty NVMe APST has been the
culprit quite frequently. Add the recommended troubleshooting steps in
the error output when this condition occurs.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The recent global id check is finding poorly implemented devices in the
wild. Include relavant device information in the output to help quicken
an appropriate quirk patch.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This provides more context to users.
Old message:
[ 00.000000] No UUID available providing old NGUID
New message:
[ 00.000000] block nvme0n1: No UUID available providing old NGUID
Fixes: d934f9848a ("nvme: provide UUID value to userspace")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
* calculate at the time we set FMODE_OPENED (do_dentry_open() for normal
opens, alloc_file() for pipe()/socket()/etc.)
* update when handling F_SETFL
* keep in a new field - file->f_iocb_flags; since that thing is needed only
before the refcount reaches zero, we can put it into the same anon union
where ->f_rcuhead and ->f_llist live - those are used only after refcount
reaches zero.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
-----BEGIN PGP SIGNATURE-----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=YqhC
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The NVM Express Base Specification 2.0 specifies in the description
of the CC – Controller Configuration register:
"Host software shall set the Arbitration Mechanism Selected (CC.AMS),
the Memory Page Size (CC.MPS), and the I/O Command Set Selected (CC.CSS)
to valid values prior to enabling the controller by setting CC.EN to ‘1’.
While we haven't seen any controller misbehaving while setting all bits
in a single write, let's do it in the order that it is written in the
spec, as there could potentially be controllers that are implemented to
rely on the configuration bits being set before enabling the controller.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Let the caller set it together with the end_io_data instead of passing
a pointless argument. Note the the target code did in fact already
set it and then just overrode it again by calling blk_execute_rq_nowait.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220524121530.943123-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static tools
- Clean the some of the kernel caps, reducing the historical stealth uAPI
leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core to
free them
- Several rc quality bug fixes for hfi1
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYo+NxgAKCRCFwuHvBreF
YbqSAQDJ+QolaATUvOQUPLbuLopUCJLe95VS15Kl3SNXiVUUFAEA8DLL1s6+WShd
AgypUxGHipx5BAytrn45/WiwuDeEbQ8=
=jgTl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static
tools
- Clean the some of the kernel caps, reducing the historical stealth
uAPI leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs
layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core
to free them
- Several rc quality bug fixes for hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (67 commits)
RDMA/rtrs-clt: Fix one kernel-doc comment
RDMA/hfi1: Remove all traces of diagpkt support
RDMA/hfi1: Consolidate software versions
RDMA/hfi1: Remove pointless driver version
RDMA/hfi1: Fix potential integer multiplication overflow errors
RDMA/hfi1: Prevent panic when SDMA is disabled
RDMA/hfi1: Prevent use of lock before it is initialized
RDMA/rxe: Fix an error handling path in rxe_get_mcg()
IB/core: Fix typo in comment
RDMA/core: Fix typo in comment
IB/hf1: Fix typo in comment
IB/qib: Fix typo in comment
IB/iser: Fix typo in comment
RDMA/mlx4: Avoid flush_scheduled_work() usage
IB/isert: Avoid flush_scheduled_work() usage
RDMA/mlx5: Remove duplicate pointer assignment in mlx5_ib_alloc_implicit_mr()
RDMA/qedr: Remove unnecessary synchronize_irq() before free_irq()
RDMA/hns: Use hr_reg_read() instead of remaining roce_get_xxx()
RDMA/hns: Use hr_reg_xxx() instead of remaining roce_set_xxx()
RDMA/irdma: Add SW mechanism to generate completions on error
...
There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom. Noteworthy
driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree,
we have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an optimization,
and SCMI now supports the 3.1 version of the specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI drivers
- Memory controller updates for Tegra, and a few updates for other
platforms.
-----BEGIN PGP SIGNATURE-----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=XoLF
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmKKlIAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC3oH/iPm/fLG2sJut8My
sU0RC9K+6ESV5h2Qy6k00/lqKstlu4EvBjw4V8vYpx3Q2+hbSFMn2SeWqqqT3Lkk
Zb8KINCFuuyMtdCBb42PV0zhUf5pCQF7ocm/Ae4jllDHtPmqk3WJ6IGtZBK5JBlw
z6RR/wKt0y0MRj9eZyPyYjOee2L2vuVh4tgnexK/4L8g2ZtMMRThhvUzSMWG4zxR
STYYNp0uFcfT1Vt85+ODevFH4TvdECAj+SqAegN+seHLM17YY7M0/WiIYpxGRv8P
lIpDQl4PBU8EBkpI5hkpJ/3qPincbuVOMLsYfxFtpcjjG12vGjFp2krGpS3TedZQ
3mvaJ7c=
=vLke
-----END PGP SIGNATURE-----
Merge tag 'v5.18' into rdma.git for-next
Following patches have dependencies.
Resolve the merge conflict in
drivers/net/ethernet/mellanox/mlx5/core/main.c by keeping the new names
for the fs functions following linux-next:
https://lore.kernel.org/r/20220519113529.226bc3e2@canb.auug.org.au/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=geQL
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
-----BEGIN PGP SIGNATURE-----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=0Rw1
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
Add two new opcodes that userspace can use for admin commands:
NVME_URING_CMD_ADMIN : non-vectroed
NVME_URING_CMD_ADMIN_VEC : vectored variant
Wire up support when these are issued on controller node(/dev/nvmeX).
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper consolidating the error checks, and fix typo in a
comment too. This is in preparation to support admin commands on this
path.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add nvme_fc_io_getuuid() to the nvme-fc transport. The routine is invoked
by the FC LLDD on a per-I/O request basis. The routine translates from the
FC-specific request structure to the bio and the cgroup structure in order
to obtain the FC appid stored in the cgroup structure. If a value is not
set or a bio is not found, a NULL appid (aka uuid) will be returned to the
LLDD.
Link: https://lore.kernel.org/r/20220519123110.17361-2-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In current implementation we set the non-mdts limits by calling
nvme_init_non_mdts_limits() from nvme_init_ctrl_finish().
This also tries to set the limits for the discovery controller which
has no I/O queues resulting in the warning message reported by the
nvme_log_error() when running blktest nvme/002: -
[ 2005.155946] run blktests nvme/002 at 2022-04-09 16:57:47
[ 2005.192223] loop: module loaded
[ 2005.196429] nvmet: adding nsid 1 to subsystem blktests-subsystem-0
[ 2005.200334] nvmet: adding nsid 1 to subsystem blktests-subsystem-1
<------------------------------SNIP---------------------------------->
[ 2008.958108] nvmet: adding nsid 1 to subsystem blktests-subsystem-997
[ 2008.962082] nvmet: adding nsid 1 to subsystem blktests-subsystem-998
[ 2008.966102] nvmet: adding nsid 1 to subsystem blktests-subsystem-999
[ 2008.973132] nvmet: creating discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN testhostnqn.
*[ 2008.973196] nvme1: Identify(0x6), Invalid Field in Command (sct 0x0 / sc 0x2) MORE DNR*
[ 2008.974595] nvme nvme1: new ctrl: "nqn.2014-08.org.nvmexpress.discovery"
[ 2009.103248] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery"
Move the call of nvme_init_non_mdts_limits() to nvme_scan_work() after
we verify that I/O queues are created since that is a converging point
for each transport where these limits are actually used.
1. FC :
nvme_fc_create_association()
...
nvme_fc_create_io_queues(ctrl);
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
2. PCIe:-
nvme_reset_work()
...
nvme_setup_io_queues()
nvme_create_io_queues()
nvme_alloc_queue()
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
3. RDMA :-
nvme_rdma_setup_ctrl
...
nvme_rdma_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
4. TCP :-
nvme_tcp_setup_ctrl
...
nvme_tcp_configure_io_queues
...
nvme_start_ctrl()
nvme_scan_queue()
nvme_scan_work()
* nvme_scan_work()
...
nvme_validate_or_alloc_ns()
nvme_alloc_ns()
nvme_update_ns_info()
nvme_update_disk_info()
nvme_config_discard() <---
blk_queue_max_write_zeroes_sectors() <---
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for using longer timeouts during controller initialization
and letting the controller come up with namespaces that are not ready
for I/O yet. We skip these not ready namespaces during scanning and
only bring them online once anoter scan is kicked off by the AEN that
is set when the NRDY bit gets set in the I/O Command Set Independent
Identify Namespace Data Structure. This asynchronous probing avoids
blocking the kernel boot when controllers take a very long time to
recover after unclean shutdowns (up to minutes).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
The RDAMA and TCP transport both complete the timed out request in the
same manner and hence code is duplicated. Add and use the helper
nvmf_complete_timed_out_request() to remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On our ZynqMP system we observe, that a NVMe drive that resets itself
while doing a firmware update causes a Kernel crash like this:
[ 67.720772] pcieport 0000:02:02.0: pciehp: Slot(2): Link Down
[ 67.720783] pcieport 0000:02:02.0: pciehp: Slot(2): Card not present
[ 67.720795] nvme 0000:04:00.0: PME# disabled
[ 67.720849] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 67.720853] nwl-pcie fd0e0000.pcie: Slave error
Analysis: When nvme_dev_disable() is called because of this PCIe hotplug
event, pci_is_enabled() is still true. And accessing the NVMe drive
which is currently not available as it's in reboot process causes this
"synchronous external abort" on this ARM64 platform.
This patch adds the pci_device_is_present() check as well, which returns
false in this "Card not present" hot-plug case. With this change, the
NVMe driver does not try to access the NVMe registers any more and the
FW update finishes without any problems.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.
Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the internal passthru commands use __nvme_submit_sync_cmd()
interface. There are few places we open code the request submission :-
1. nvme_keep_alive_work(struct work_struct *work)
2. nvme_timeout(struct request *req, bool reserved)
3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode)
Mark the internal passthru request quiet so that we can skip the verbose
error message from nvme_log_error() in nvme_end_req() completion path,
this will be consistent with what we have in __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Log a few more path related status codes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme specification only requires qword alignment for segment
descriptors, and the driver already guarantees that. The spec has always
allowed user data to be dword aligned, which is what the queue's
attribute is for, so relax the alignment requirement to that value.
While we could allow byte alignment for some controllers when using
SGLs, we still need to support PRP, and that only allows dword.
Fixes: 3b2a1ebceb ("nvme: set dma alignment to qword")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMRSLl is in the unit of logical blocks, while max_discard_sectors is
in the unit of "linux sector".
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
wire up support for async passthru that takes an array of buffers (using
iovec). Exposed via a new op NVME_URING_CMD_IO_VEC. Same 'struct
nvme_uring_cmd' is to be used with -
1. cmd.addr as base address of user iovec array
2. cmd.data_len as count of iovec array elements
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-6-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce handler for fops->uring_cmd(), implementing async passthru
on char device (/dev/ngX). The handler supports newly introduced
operation NVME_URING_CMD_IO. This operates on a new structure
nvme_uring_cmd, which is similar to struct nvme_passthru_cmd64 but
without the embedded 8b result field. This field is not needed since
uring-cmd allows to return additional result via big-CQE.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Divide the work into two helpers, namely nvme_alloc_user_request and
nvme_execute_user_rq. This is a prep patch, to help wiring up
uring-cmd support in nvme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in fix for assuming bio is non-NULL]
Link: https://lore.kernel.org/r/20220511054750.20432-4-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The new nvme-apple driver is missing a few conversions to and
from little-endian data:
drivers/nvme/host/apple.c:291:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp1 @@ got restricted __le64 [usertype] prp1 @@
drivers/nvme/host/apple.c:291:19: sparse: expected unsigned long long [usertype] prp1
drivers/nvme/host/apple.c:291:19: sparse: got restricted __le64 [usertype] prp1
drivers/nvme/host/apple.c:292:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp2 @@ got restricted __le64 [usertype] prp2 @@
drivers/nvme/host/apple.c:293:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] length @@ got restricted __le16 [usertype] length @@
drivers/nvme/host/apple.c:351:52: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned int [usertype] next_dma_addr @@ got restricted __le64 [usertype] @@
drivers/nvme/host/apple.c:456:45: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned int [addressable] [usertype] prp_dma @@
drivers/nvme/host/apple.c:459:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned long long [assigned] [usertype] dma_addr @@
drivers/nvme/host/apple.c:474:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp1 @@ got unsigned int [usertype] dma_address @@
drivers/nvme/host/apple.c:475:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp2 @@ got unsigned int [usertype] first_dma @@
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQRUAfN3OZ14tapALxsd6alOrecRcQUCYm/5lhMcc3ZlbkBzdmVu
cGV0ZXIuZGV2AAoJEB3pqU6t5xFxITsBAI02bdBvHQAFouu1WzhLzlAPNqjGv3Th
YFOJL4y2oyigAP9zkIGP0e1JcpApPxvlmQnM340ZY+TCth+ahoCWlS4VAg==
=b0QX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gi38
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC NVMe driver and dependencies:
- RTKit IPC library required to boot and communicate with
co-processors embedded inside Apple SoCs
- SART DMA address filter required to allow some DMA transactions for
the NVMe co-processor
- NVMe platform driver
The following minor changes since v3 on the mailing list have been
folded in:
- sart: %llx -> %pa for a phys_addr_t
- rtkit:/sart: Drop IS_ENABLED inside headers
- rtkit: Use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL
- nvme: Set NVME_REQ_CANCELLED in the timeout handler
- nvme: Use DEFINE_SIMPLE_DEV_PM_OPS instead of #ifdef CONFIG_PM_SLEEP
* tag 'asahi-soc-rtkit-sart-nvme-for-5.19' of https://github.com/AsahiLinux/linux:
nvme-apple: Add initial Apple SoC NVMe driver
dt-bindings: nvme: Add Apple ANS NVMe
soc: apple: Add SART driver
dt-bindings: iommu: Add Apple SART DMA address filter
soc: apple: Add RTKit IPC library
soc: apple: Always include Makefile
Link: https://lore.kernel.org/r/20220505154020.84638-1-sven@svenpeter.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The nvme driver never sets a discard_alignment, so it also doens't need
to clear it to zero.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220418045314.360785-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-fc appid support needs CONFIG_BLK_CGROUP_FC_APPID to work, so disable
the whole code if the option is not set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220420042723.1010598-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apple SoCs such as the M1 come with an embedded NVMe controller that
is not attached to any PCIe bus. Additionally, it doesn't conform
to the NVMe specification and requires a bunch of changes to command
submission and IOMMU configuration to work.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Secure erase is a very different operation from discard in that it is
a data integrity operation vs hint. Fully split the limits and helper
infrastructure to make the separation more clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2]
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Acked-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just use a non-zero max_discard_sectors as an indicator for discard
support, similar to what is done for write zeroes.
The only places where needs special attention is the RAID5 driver,
which must clear discard support for security reasons by default,
even if the default stacking rules would allow for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd]
Acked-by: Jan Höppner <hoeppner@linux.ibm.com> [s390]
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: David Sterba <dsterba@suse.com> [btrfs]
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-25-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check the max supported sectors for zone append based on
the block_device instead of having to poke into the block layer internal
request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220415045258.199825-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>
Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.
The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality). This is similar to what the SCSI
verbose error logging does.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=0Axq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl. This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.
This happens in the following cases:
1) A new ctrl is being connected.
2) An existing ctrl is successfully reconnected.
3) An existing ctrl is being reset.
While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().
This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.
See sample hang below.
Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
therefore only fetches and parses the ANA log;
any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
is called in nvme_start_ctrl();
this parses the ANA log without fetching it.
At this point the ctrl is live,
therefore, disks can be set live normally.
Sample failure:
nvme nvme0: starting error recovery
nvme nvme0: Reconnecting in 10 seconds...
block nvme0n6: no usable path - requeuing I/O
INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
Tainted: G E 5.14.5-1.el7.elrepo.x86_64 #1
Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
Call Trace:
__schedule+0x2a2/0x7e0
schedule+0x4e/0xb0
io_schedule+0x16/0x40
wait_on_page_bit_common+0x15c/0x3e0
do_read_cache_page+0x1e0/0x410
read_cache_page+0x12/0x20
read_part_sector+0x46/0x100
read_lba+0x121/0x240
efi_partition+0x1d2/0x6a0
bdev_disk_changed.part.0+0x1df/0x430
bdev_disk_changed+0x18/0x20
blkdev_get_whole+0x77/0xe0
blkdev_get_by_dev+0xd2/0x3a0
__device_add_disk+0x1ed/0x310
device_add_disk+0x13/0x20
nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
nvme_update_ana_state+0xca/0xe0 [nvme_core]
nvme_parse_ana_log+0xac/0x170 [nvme_core]
nvme_read_ana_log+0x7d/0xe0 [nvme_core]
nvme_mpath_init_identify+0x105/0x150 [nvme_core]
nvme_init_identify+0x2df/0x4d0 [nvme_core]
nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
process_one_work+0x1bd/0x360
worker_thread+0x50/0x3d0
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make nvme_ns_remove match the assumptions elsewhere.
1) !NVME_NS_READY needs to be srcu synchronized to make sure nothing is
running in __nvme_find_path or nvme_round_robin_path that will
re-assign this ns to current_path.
2) Any matching current_path entries need to be cleared before removing
from the siblings list, to prevent calling nvme_round_robin_path with
an "old" ns that's off list.
3) Finally the list_del_rcu can happen, and then synchronize again
before releasing any reference counts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:
"If Namespace Management, ANA Reporting, or NVM Sets are supported, the
NSIDs shall be unique within the NVM subsystem. If the Namespace
Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
a) for shared namespace shall be unique; and
b) for private namespace are not required to be unique."
Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.
Make sure this specific setup is supported in Linux.
Fixes: 9ad1927a3b ("nvme: always search for namespace head")
Signed-off-by: Sungup Moon <sungup.moon@samsung.com>
[hch: refactored and fixed the controller vs subsystem based naming
conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
The left shift is followed by a re-assignment back to cc_css, the
assignment is redundant. Fix this by replacing the "<<=" operator with
"<<" instead.
This cleans up the clang scan build warning:
drivers/nvme/target/core.c:1124:10: warning: Although the value stored to 'cc_css' is used in the enclosing expression, the value is never actually read from 'cc_css' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Any attempt to flush kernel-global WQs has possibility of deadlock
so we should simply stop using them, instead introduce nvmet_wq
which is the generic nvmet workqueue for work elements that
don't explicitly require a dedicated workqueue (by the mere fact
that they are using the system_wq).
Changes were done using the following replaces:
- s/schedule_work(/queue_work(nvmet_wq, /g
- s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g
- s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=RAVX
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block
Pull block layer 64-bit data integrity support from Jens Axboe:
"This adds support for 64-bit data integrity in the block layer and in
NVMe"
* tag 'for-5.18/64bit-pi-2022-03-25' of git://git.kernel.dk/linux-block:
crypto: fix crc64 testmgr digest byte order
nvme: add support for enhanced metadata
block: add pi for extended integrity
crypto: add rocksoft 64b crc guard tag framework
lib: add rocksoft model crc64
linux/kernel: introduce lower_48_bits function
asm-generic: introduce be48 unaligned accessors
nvme: allow integrity on extended metadata formats
block: support pi with extended metadata
-----BEGIN PGP SIGNATURE-----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=efaq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block
Pull NVMe write streams removal from Jens Axboe:
"This removes the write streams support in NVMe. No vendor ever really
shipped working support for this, and they are not interested in
supporting it.
With the NVMe support gone, we have nothing in the tree that supports
this. Remove passing around of the hints.
The only discussion point in this patchset imho is the fact that the
file specific write hint setting/getting fcntl helpers will now return
-1/EINVAL like they did before we supported write hints. No known
applications use these functions, I only know of one prototype that I
help do for RocksDB, and that's not used. That said, with a change
like this, it's always a bit controversial. Alternatively, we could
just make them return 0 and pretend it worked. It's placement based
hints after all"
* tag 'for-5.18/write-streams-2022-03-18' of git://git.kernel.dk/linux-block:
fs: remove fs.f_write_hint
fs: remove kiocb.ki_hint
block: remove the per-bio/request write hint
nvme: remove support or stream based temperature hint
Add quirks to not fail the initialization and to have quick resume
latency after cold/warm reboot.
Signed-off-by: Monish Kumar R <monish.kumar.r@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow reading /sys/module/nvme/parameters/use_threaded_interrupts to see
if the use_threaded_interrupts module parameter is in use.
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
commit 2f4c9ba23b ("nvme: export zoned namespaces without Zone Append
support read-only") marks zoned namespaces without append support
read-only. It does iso by setting NVME_NS_FORCE_RO in ns->flags in
nvme_update_zone_info and checking for that flag later in
nvme_update_disk_info to mark the disk as read-only.
But commit 73d90386b5 ("nvme: cleanup zone information initialization")
rearranged nvme_update_disk_info to be called before
nvme_update_zone_info and thus not marking the disk as read-only.
The call order cannot be just reverted because nvme_update_zone_info sets
certain queue parameters such as zone_write_granularity that depend on the
prior call to nvme_update_disk_info.
Remove the call to set_disk_ro in nvme_update_disk_info. and call
set_disk_ro after nvme_update_zone_info and nvme_update_disk_info to set
the permission for ZNS drives correctly. The same applies to the
multipath disk path.
Fixes: 73d90386b5 ("nvme: cleanup zone information initialization")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
Start warning about exposing a namespace as multiple block devices,
and set a fixed deprecation release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Just open code the allocation + initialization in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
They way how assigning the disk name and commenting on why it is done
is split over core.c and multipath.c seems to be rather confusing.
Now that ns_head->disk always exists we can do all the work in core.c
and have a single big comment explaining the issues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Revert commit 626851e922 ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.
Fixes: 626851e922 ("nvmet: make discovery NQN configurable")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvmet_ns_changed states via lockdep that the ns->subsys->lock must be
held. The only caller of nvmet_ns_changed which does not acquire that
lock is nvmet_ns_revalidate. nvmet_ns_revalidate has 3 callers,
of which 2 do not acquire that lock: nvmet_execute_identify_cns_cs_ns
and nvmet_execute_identify_ns. The other caller
nvmet_ns_revalidate_size_store does acquire the lock.
Move the call to nvmet_ns_changed from nvmet_ns_revalidate to the callers
so that they can perform the correct locking as needed.
This issue was found using a static type-based analyser and manually
verified.
Reported-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Instead of using sprintf, use snprintf with buffer size limited to
PAGE_SIZE just like what we have for the rest of the file.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Don't fold line that can fit into 80 char limit. No functional change
in this patch.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes following kernel-doc warning:-
drivers/nvme/target/rdma.c:1722: warning: expecting prototype for nvme_rdma_device_removal(). Prototype was for nvmet_rdma_device_removal() instead
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes following kernel-doc warning:-
drivers/nvme/target/fc.c:1619: warning: expecting prototype for nvme_fc_unregister_targetport(). Prototype was for nvmet_fc_unregister_targetport() instead
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes following kernel-doc warning :-
drivers/nvme/target/fc.c:1365: warning: expecting prototype for nvme_fc_register_targetport(). Prototype was for nvmet_fc_register_targetport() instead
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Put NVMe/TCP sockets in their own class to avoid some lockdep warnings.
Sockets created by nvme-tcp are not exposed to user-space, and will not
trigger certain code paths that the general socket API exposes.
Lockdep complains about a circular dependency between the socket and
filesystem locks, because setsockopt can trigger a page fault with a
socket lock held, but nvme-tcp sends requests on the socket while file
system locks are held.
======================================================
WARNING: possible circular locking dependency detected
5.15.0-rc3 #1 Not tainted
------------------------------------------------------
fio/1496 is trying to acquire lock:
(sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80
but task is already holding lock:
(&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
which lock already depends on the new lock.
other info that might help us debug this:
chain exists of:
sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xfs_dir_ilock_class/5);
lock(sb_internal);
lock(&xfs_dir_ilock_class/5);
lock(sk_lock-AF_INET);
*** DEADLOCK ***
6 locks held by fio/1496:
#0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20
#1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20
#2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs]
#3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs]
#4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0
#5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp]
This annotation lets lockdep analyze nvme-tcp controlled sockets
independently of what the user-space sockets API does.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The call to nvme_tcp_alloc_queue() fits perfectly in one line without
exceeding 80 char limit for the line.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
No point in initializing ret variable to 0 in nvme_tcp_start_io_queue()
since it gets overwritten by a call to nvme_tcp_start_queue().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use bio_io_error() here since bio_io_error does the same thing.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ANA log buffer can get really large, as it depends on the
controller configuration. So to avoid an out-of-memory issue
during scanning use kvmalloc() instead of the kmalloc().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVM Express ratified TP 4068 defines new protection information formats.
Implement support for the CRC64 guard tags.
Since the block layer doesn't support variable length reference tags,
driver support for the Storage Tag space is not supported at this time.
Cc: Hannes Reinecke <hare@suse.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220303201312.3255347-9-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block integrity subsystem knows how to construct protection
information buffers with metadata beyond the protection information
fields. Remove the driver restriction.
Note, this can only work if the PI field appears first in the metadata,
as the integrity subsystem doesn't calculate guard tags on preceding
metadata.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220303201312.3255347-3-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This support was added for RocksDB, but RocksDB ended up not using it.
At the same time drives on the open marked (vs those build for OEMs
for non-Linux support) that actually support streams are extremly
rare. Don't bloat the nvme driver for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20220304175556.407719-1-hch@lst.de
[axboe: fold in ctrl->nr_streams removal from Keith]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.18/drivers: (51 commits)
bcache: fixup multiple threads crash
bcache: fixup bcache_dev_sectors_dirty_add() multithreaded CPU false sharing
floppy: use memcpy_{to,from}_bvec
drbd: use bvec_kmap_local in recv_dless_read
drbd: use bvec_kmap_local in drbd_csum_bio
bcache: use bvec_kmap_local in bio_csum
nvdimm-btt: use bvec_kmap_local in btt_rw_integrity
nvdimm-blk: use bvec_kmap_local in nd_blk_rw_integrity
zram: use memcpy_from_bvec in zram_bvec_write
zram: use memcpy_to_bvec in zram_bvec_read
aoe: use bvec_kmap_local in bvcpy
iss-simdisk: use bvec_kmap_local in simdisk_submit_bio
nvme: check that EUI/GUID/UUID are globally unique
nvme: check for duplicate identifiers earlier
nvme: fix the check for duplicate unique identifiers
nvme: cleanup __nvme_check_ids
nvme: remove nssa from struct nvme_ctrl
nvme: explicitly set non-error for directives
nvme: expose cntrltype and dctype through sysfs
nvme: send uevent on connection up
...
Move the check for the actual pgmap types that need the free at refcount
one behavior into the out of line helper, and thus avoid the need to
pull memremap.h into mm.h.
Link: https://lkml.kernel.org/r/20220210072828.2930359-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Add a check to verify that the unique identifiers are unique globally
in addition to the existing check that verifies that they are unique
inside a single subsystem.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Xi Ruoyao
Abhijit
Sagi Grimberg
Jason A. Donenfeld
Linus Torvalds
Kanchan Joshi
Anuj Gupta
Jens Axboe
Christoph Hellwig
zhenwei pi
Varun Prakash
Keith Busch
Rishabh Bhatnagar
Tina Hsu
Michael Kelley
Martin Belanger
Fabio M. De Francesco
Daniel Wagner
Guixin Liu
Genjian Zhang
Jackie Liu
Wolfram Sang
Linjun Bao
Dennis Maisenbacher
Bart Van Assche
Maurizio Lombardi
Hannes Reinecke
Shyamin Ayesh
Dennis P. Kliem
Christophe JAILLET
Amit Engel
Zhang Xiaoxu
Ming Lei
Joel Granados
Lukas Bulwahn
Chaitanya Kulkarni
Colin Ian King
Liu Song
Dan Carpenter
Nick Bowler
Bean Huo
Caleb Sander
Israel Rukshin
Xiang wangx
Logan Gunthorpe
Tobias Gruetzmacher
John Garry
Lamarque Vieira Souza
Alan Adamson
Ruozhu Li
Pablo Greco
Leo Savernik
rasheed.hsueh
Ning Wang
Stefan Reiter
Thomas Weißschuh
Al Viro
Julia Lawall
Niklas Cassel
Jason Gunthorpe
Muneendra Kumar
Stefan Roese
Smith, Kyle Miller (Nimble Kernel)
Max Gurtovoy
Tom Yan
Arnd Bergmann
Sven Peter
Anton Eidelman
Chris Leech
Sungup Moon
Monish Kumar R
Xin Hao
Pankaj Raghav
Guoqing Jiang